🚜 Merges/Redirect BeagleBone Black GPIO component pages (#8337)

source/_components/bbb_gpio.markdown

@@ -8,10 +8,117 @@ comments: false
 sharing: true
 footer: true
 logo: beaglebone-black.png
-ha_category: DIY
+ha_category:
+  - DIY
+  - Binary Sensor
+  - Switch
 ha_release: 0.36
 ha_iot_class: "Local Push"
+redirect_from:
+  - /components/binary_sensor.bbb_gpio/
+  - /components/switch.bbb_gpio/
 ---
 
 The `bbb_gpio` component is the base for all [BeagleBone Black](https://beagleboard.org/black) related GPIO platforms in Home Assistant.
-There is no setup needed for the component itself, for the platforms please check their corresponding pages.
+There is no setup needed for the component itself.
+
+## {% linkable_title Binary Sensor %}
+
+The `bbb_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
+
+## {% linkable_title Configuration %}
+
+To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+  - platform: bbb_gpio
+    pins:
+      P8_12:
+        name: Door
+      GPIO0_26:
+        name: Window
+```
+
+{% configuration %}
+pins:
+  description: List of used pins.
+  required: true
+  type: map
+  keys:
+    pin_name:
+      description: Port numbers and corresponding names.
+      required: true
+      type: map
+      keys:
+        name:
+          description: Friendly name to use for the frontend.
+          required: true
+          type: string
+        bouncetime:
+          description: Debounce time for reading input pin defined in milliseconds [ms].
+          required: false
+          type: integer
+          default: 50
+        invert_logic:
+          description: If `true`, inverts the input logic to ACTIVE LOW
+          required: false
+          type: boolean
+          default: false
+        pull_mode:
+          description: Type of internal pull resistor connected to input. Options are `UP` - pull-up resistor and `DOWN` - pull-down resistor.
+          required: false
+          type: string
+          default: UP  
+{% endconfiguration %}
+
+For more details about the GPIO layout, visit the [article](http://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.
+
+## {% linkable_title Switch %}
+
+The `bbb_gpio` switch platform allows you to control the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
+
+## {% linkable_title Configuration %}
+
+To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+switch:
+  - platform: bbb_gpio
+    pins:
+      GPIO0_7:
+        name: LED Red
+      P9_12:
+        name: LED Green
+```
+
+{% configuration %}
+pins:
+  description: List of used pins.
+  required: true
+  type: map
+  keys:
+    pin_name:
+      description: Port numbers and corresponding names.
+      required: true
+      type: map
+      keys:
+        name:
+          description: Friendly name to use for the frontend.
+          required: false
+          type: string
+        initial:
+          description: Initial state of the pin.
+          required: false
+          default: false
+          type: boolean
+        invert_logic:
+          description: If `true`, inverts the input logic to ACTIVE LOW
+          required: false
+          default: false
+          type: boolean
+{% endconfiguration %}
+
+For more details about the GPIO layout, visit the [article](http://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.

source/_components/binary_sensor.bbb_gpio.markdown

@@ -1,65 +0,0 @@
----
-layout: page
-title: "BeagleBone Black GPIO Binary Sensor"
-description: "Instructions on how to integrate the GPIO sensor capability of a BeagleBone Black into Home Assistant."
-date: 2017-01-14 10:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: beaglebone-black.png
-ha_category: DIY
-ha_release: 0.37
-ha_iot_class: "Local Push"
----
-
-The `bbb_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
-
-## {% linkable_title Configuration %}
-
-To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-binary_sensor:
-  - platform: bbb_gpio
-    pins:
-      P8_12:
-        name: Door
-      GPIO0_26:
-        name: Window
-```
-
-{% configuration %}
-pins:
-  description: List of used pins.
-  required: true
-  type: map
-  keys:
-    pin_name:
-      description: Port numbers and corresponding names.
-      required: true
-      type: map
-      keys:
-        name:
-          description: Friendly name to use for the frontend.
-          required: true
-          type: string
-        bouncetime:
-          description: Debounce time for reading input pin defined in milliseconds [ms].
-          required: false
-          type: integer
-          default: 50
-        invert_logic:
-          description: If `true`, inverts the input logic to ACTIVE LOW
-          required: false
-          type: boolean
-          default: false
-        pull_mode:
-          description: Type of internal pull resistor connected to input. Options are `UP` - pull-up resistor and `DOWN` - pull-down resistor.
-          required: false
-          type: string
-          default: UP  
-{% endconfiguration %}
-
-For more details about the GPIO layout, visit the [article](http://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.

source/_components/switch.bbb_gpio.markdown

@@ -1,60 +0,0 @@
----
-layout: page
-title: "BeagleBone Black GPIO Switch"
-description: "Instructions on how to integrate the GPIO of a BeagleBone Black into Home Assistant as a switch."
-date: 2017-01-14 10:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: beaglebone-black.png
-ha_category: DIY
-ha_release: 0.36
-ha_iot_class: "Local Push"
----
-
-The `bbb_gpio` switch platform allows you to control the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
-
-## {% linkable_title Configuration %}
-
-To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-switch:
-  - platform: bbb_gpio
-    pins:
-      GPIO0_7:
-        name: LED Red
-      P9_12:
-        name: LED Green
-```
-
-{% configuration %}
-pins:
-  description: List of used pins.
-  required: true
-  type: map
-  keys:
-    pin_name:
-      description: Port numbers and corresponding names.
-      required: true
-      type: map
-      keys:
-        name:
-          description: Friendly name to use for the frontend.
-          required: false
-          type: string
-        initial:
-          description: Initial state of the pin.
-          required: false
-          default: false
-          type: boolean
-        invert_logic:
-          description: If `true`, inverts the input logic to ACTIVE LOW
-          required: false
-          default: false
-          type: boolean
-{% endconfiguration %}
-
-For more details about the GPIO layout, visit the [article](http://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.