Add switch to Blink docs (#29534)

This commit is contained in:
mkmer 2024-01-03 04:46:02 -05:00 committed by GitHub
parent 66ebd484e0
commit f3bb576d49
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -7,6 +7,7 @@ ha_category:
- Camera
- Hub
- Sensor
- Switch
ha_release: '0.40'
ha_iot_class: Cloud Polling
ha_codeowners:
@ -47,6 +48,7 @@ Once Home Assistant starts and you authenticate access, the `blink` integration
- A `camera` for each camera linked to your Blink sync module.
- A `sensor` per camera for temperature and Wi-Fi strength.
- A `binary_sensor` motion detection, camera armed status, and battery status.
- A `switch` per camera to enable/disable motion detection
Since the cameras are battery operated, setting the `scan_interval` must be done with care so as to not drain the battery too quickly, or hammer Blink's servers with too many API requests. The cameras can be manually updated via the `trigger_camera` service which will ignore the throttling caused by `scan_interval`. As a note, all of the camera-specific sensors are only polled when a new image is requested from the camera. This means that relying on any of these sensors to provide timely and accurate data is not recommended.