mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-23 17:27:19 +00:00
🚜 Merges/Redirects Arduino component pages (#9164)
* 🚜 Merges/Redirects Arduino component pages * ✏️ Tweak
This commit is contained in:
Klaas Schoute
Fabian Affolter
parent
dc8a226b58
commit
f47c2f98ec
@ -8,10 +8,16 @@ comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: arduino.png
|
||||
ha_category: DIY
|
||||
ha_category:
|
||||
- DIY
|
||||
- Sensor
|
||||
- Switch
|
||||
featured: true
|
||||
ha_release: pre 0.7
|
||||
ha_iot_class: Local Polling
|
||||
redirect_from:
|
||||
- /components/sensor.arduino/
|
||||
- /components/switch.arduino/
|
||||
---
|
||||
|
||||
The [Arduino](https://www.arduino.cc/) device family are microcontroller boards that are often based on the ATmega328 chip. They come with digital input/output pins (some can be used as PWM outputs), analog inputs, and a USB connection.
|
||||
@ -21,6 +27,11 @@ There are a lot of extensions (so-called [shields](https://www.arduino.cc/en/Mai
|
||||
|
||||
The `arduino` component is designed to let you use a directly attached board to your Home Assistant host over USB.
|
||||
|
||||
There is currently support for the following device types within Home Assistant:
|
||||
|
||||
- [Sensor](#sensor)
|
||||
- [Switch](#switch)
|
||||
|
||||
## {% linkable_title Configuration %}
|
||||
|
||||
You need to have the [Firmata firmware](https://github.com/firmata/) on your board. Please upload the `StandardFirmata` sketch to your board; please refer to the [Arduino documentation](https://www.arduino.cc/en/Main/Howto) for further information.
|
||||
@ -57,3 +68,86 @@ Add the user who is used to run Home Assistant to the groups to allow access to
|
||||
```bash
|
||||
$ sudo usermod -a -G dialout,lock $USER
|
||||
```
|
||||
|
||||
## {% linkable_title Sensor %}
|
||||
|
||||
The `arduino` sensor platform allows you to get numerical values from an analog input pin of an [Arduino](https://www.arduino.cc/) board. Usually the value is between 0 and 1024.
|
||||
|
||||
To enable an Arduino sensor with Home Assistant, add the following section to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
platform: arduino
|
||||
pins:
|
||||
1:
|
||||
name: Door switch
|
||||
0:
|
||||
name: Brightness
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
pins:
|
||||
description: List of pins to use.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
pin_number:
|
||||
description: The pin number that corresponds with the pin numbering schema of your board.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
name:
|
||||
default: Name that will be used in the frontend for the pin.
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
|
||||
The 6 analog pins of an Arduino UNO are numbered from A0 to A5.
|
||||
|
||||
## {% linkable_title Switch %}
|
||||
|
||||
The `arduino` switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3, 5, 6, 9, 10, and 11 on an Arduino Uno) is not supported yet.
|
||||
|
||||
To enable the Arduino pins with Home Assistant, add the following section to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
switch:
|
||||
platform: arduino
|
||||
pins:
|
||||
11:
|
||||
name: Fan Office
|
||||
12:
|
||||
name: Light Desk
|
||||
initial: true
|
||||
negate: true
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
pins:
|
||||
description: List of of pins to use.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
pin_number:
|
||||
description: The pin number that corresponds with the pin numbering schema of your board.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
name:
|
||||
default: Name that will be used in the frontend for the pin.
|
||||
type: string
|
||||
required: false
|
||||
initial:
|
||||
default: The initial value for this port.
|
||||
type: boolean
|
||||
required: false
|
||||
default: false
|
||||
negate:
|
||||
default: If this pin should be inverted.
|
||||
type: boolean
|
||||
required: false
|
||||
default: false
|
||||
{% endconfiguration %}
|
||||
|
||||
The digital pins are numbered from 0 to 13 on a Arduino UNO. The available pins are 2 till 13. For testing purposes you can use pin 13 because with that pin you can control the internal LED.
|
||||
|
||||
@ -1,49 +0,0 @@
|
||||
---
|
||||
layout: page
|
||||
title: "Arduino Sensor"
|
||||
description: "Instructions on how to integrate Arduino boards pins as sensors within Home Assistant."
|
||||
date: 2015-09-14 18:28
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: arduino.png
|
||||
ha_category: DIY
|
||||
ha_release: pre 0.7
|
||||
ha_iot_class: Local Polling
|
||||
---
|
||||
|
||||
|
||||
The `arduino` sensor platform allows you to get numerical values from an analog input pin of an [Arduino](https://www.arduino.cc/) board. Usually the value is between 0 and 1024.
|
||||
|
||||
To enable an Arduino sensor with Home Assistant, add the following section to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
platform: arduino
|
||||
pins:
|
||||
1:
|
||||
name: Door switch
|
||||
0:
|
||||
name: Brightness
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
pins:
|
||||
description: List of pins to use.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
pin_number:
|
||||
description: The pin number that corresponds with the pin numbering schema of your board.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
name:
|
||||
default: Name that will be used in the frontend for the pin.
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
|
||||
The 6 analog pins of an Arduino UNO are numbered from A0 to A5.
|
||||
|
||||
@ -1,60 +0,0 @@
|
||||
---
|
||||
layout: page
|
||||
title: "Arduino Switch"
|
||||
description: "Instructions on how to integrate Arduino boards pins as switches within Home Assistant."
|
||||
date: 2015-09-14 18:28
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: arduino.png
|
||||
ha_category: DIY
|
||||
ha_release: pre 0.7
|
||||
ha_iot_class: Local Polling
|
||||
---
|
||||
|
||||
The `arduino` switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3, 5, 6, 9, 10, and 11 on an Arduino Uno) is not supported yet.
|
||||
|
||||
To enable the Arduino pins with Home Assistant, add the following section to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
switch:
|
||||
platform: arduino
|
||||
pins:
|
||||
11:
|
||||
name: Fan Office
|
||||
12:
|
||||
name: Light Desk
|
||||
initial: true
|
||||
negate: true
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
pins:
|
||||
description: List of of pins to use.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
pin_number:
|
||||
description: The pin number that corresponds with the pin numbering schema of your board.
|
||||
required: true
|
||||
type: map
|
||||
keys:
|
||||
name:
|
||||
default: Name that will be used in the frontend for the pin.
|
||||
type: string
|
||||
required: false
|
||||
initial:
|
||||
default: The initial value for this port.
|
||||
type: boolean
|
||||
required: false
|
||||
default: false
|
||||
negate:
|
||||
default: If this pin should be inverted.
|
||||
type: boolean
|
||||
required: false
|
||||
default: false
|
||||
{% endconfiguration %}
|
||||
|
||||
The digital pins are numbered from 0 to 13 on a Arduino UNO. The available pins are 2 till 13. For testing purposes you can use pin 13 because with that pin you can control the internal LED.
|
||||
Loading…
x
Reference in New Issue
Block a user