mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-15 21:36:52 +00:00
Fix link
This commit is contained in:
parent
584da63bd5
commit
f8fdb75198
@ -29,7 +29,7 @@ climate:
|
||||
|
||||
- **name** (*Optional*): A name for this devices used within Home assistant
|
||||
- **address** (*Required*): The KNX group address that is used to turn on/off this actuator channel
|
||||
- **temperature_address** (*Required*): The group address that is used to communicate the current temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value) (see http://www.knx.org/fileadmin/template/documents/downloads_support_menu/KNX_tutor_seminar_page/Advanced_documentation/05_Interworking_E1209.pdf)
|
||||
- **temperature_address** (*Required*): The group address that is used to communicate the current temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value), check [details](http://www.knx.org/fileadmin/template/documents/downloads_support_menu/KNX_tutor_seminar_page/Advanced_documentation/05_Interworking_E1209.pdf).
|
||||
- **setpoint_address** (*Required*): The group address that is used to set/read the target temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value). Make sure, you set the read-flag for the thermostat to allow Home Assistant to read the target temperature.
|
||||
|
||||
With the current version of the module, no advanced KNX thermostat functionalities (e.g. HVAC mode) are supported.
|
||||
|
Loading…
x
Reference in New Issue
Block a user