jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-16 13:56:53 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix samples, add title and other changes (#3828)

Browse Source
This commit is contained in:
Fabian Affolter 2017-10-30 07:54:34 +01:00 committed by GitHub
parent 9faef559b6
commit f91615cbb6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 106 additions and 117 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
source/_components/binary_sensor.knx.markdown
View File

@ -18,6 +18,7 @@ The `knx` sensor platform allows you to monitor [KNX](http://www.knx.org) binary
The `knx` component must be configured correctly, see [KNX Component](/components/knx).
```yaml
# Example configuration.yaml entry
binary_sensor:
- platform: knx
name: "Entrance.Motion.Sensor"
@ -26,14 +27,17 @@ binary_sensor:
#significant_bit: 2
```
* **name** (*Optional*): A name for this device used within Home Assistant.
* **address**: KNX group address of the binary sensor
* **device_class**: (Optional) HASS device class e.g. "motion"
* **significant_bit**: (Optional) Specify which significant bit of the KNX value should be used. Default is 1.
Configuration variables:
- **name** (*Optional*): A name for this device used within Home Assistant.
- **address**: KNX group address of the binary sensor.
- **device_class** (Optional): HASS device class e.g. "motion".
- **significant_bit** (Optional): Specify which significant bit of the KNX value should be used. Default is 1.
You can also attach actions to binary sensors (e.g., to switch on a light when a switch was pressed). In this example, one light is switched on when the button was pressed once and two others when the button was pressed a second time.
```yaml
# Example configuration.yaml entry
binary_sensor:
- platform: knx
name: Livingroom.3Switch3
@ -53,8 +57,10 @@ binary_sensor:
service: homeassistant.turn_on
```
- **name** (*Optional*): A name for this device used within Home Assistant.
- **counter**: (*Optional*) Set to 2 if your only want the action to be executed if the button was pressed twice. To 3 for three times button pressed. Defaults to 1.
- **hook**: (Optional): Indicates if the automation should be executed on what state of the binary sensor. Values: "on" or "off". Defaults to "on".
- **action**: Specify a list of actions analog to the [HASS automation rules](https://home-assistant.io/docs/automation/action/).
Configuration variables:
- **name** (*Optional*): A name for this device used within Home Assistant.
- **counter** (*Optional*): Set to 2 if your only want the action to be executed if the button was pressed twice. To 3 for three times button pressed. Defaults to 1.
- **hook** (Optional): Indicates if the automation should be executed on what state of the binary sensor. Values: "on" or "off". Defaults to "on".
- **action**: Specify a list of actions analog to the [automation rules](/docs/automation/action/).

25
source/_components/climate.knx.markdown
View File

@ -21,6 +21,7 @@ The `knx` component must be configured correctly, see [KNX Component](/component
To use your KNX thermostats in your installation, add the following lines to your `configuration.yaml` file:
```yaml
# Example configuration.yaml entry
climate:
- platform: knx
name: HASS-Kitchen.Temperature
@ -33,6 +34,7 @@ climate:
Alternatively, if your device has dedicated binary group addresses for frost/night/comfort mode:
```yaml
# Example configuration.yaml entry
climate:
- platform: knx
name: HASS-Kitchen.Temperature
@ -44,20 +46,21 @@ climate:
operation_mode_comfort_address: '5/1/5'
```
Configuration variables:
* **name** (*Optional*): A name for this device used within Home Assistant.
* **temperature_address**: KNX group address for reading current room temperature from KNX bus.
* **target_temperature_address**: KNX group address for reading current target temperature from KNX bus.
* **setpoint_address**: KNX group address for basis setpoint
- **name** (*Optional*): A name for this device used within Home Assistant.
- **temperature_address**: KNX group address for reading current room temperature from KNX bus.
- **target_temperature_address**: KNX group address for reading current target temperature from KNX bus.
- **setpoint_address**: KNX group address for basis setpoint
* **operation_mode_address** (*Optional*) KNX address for operation mode (Frost protection/night/comfort).
* **operation_mode_state_address** (*Optional*) Explicit KNX address for reading operation mode
* **controller_status_address** (*Optional*) KNX address for HVAC controller status (in accordance with KNX AN 097/07 rev 3)
* **controller_status_state_address** (*Optional*) Explicit KNX address for reading HVAC controller status
- **operation_mode_address** (*Optional*): KNX address for operation mode (Frost protection/night/comfort).
- **operation_mode_state_address** (*Optional*): Explicit KNX address for reading operation mode
- **controller_status_address** (*Optional*): KNX address for HVAC controller status (in accordance with KNX AN 097/07 rev 3)
- **controller_status_state_address** (*Optional*): Explicit KNX address for reading HVAC controller status
* **operation_mode_frost_protection_address** (*Optional*) KNX address for switching on/off frost/heat protection mode.
* **operation_mode_night_address** (*Optional*) KNX address for switching on/off night mode.
* **operation_mode_comfort_address** (*Optional*) KNX address for switching on/off comfort mode.
- **operation_mode_frost_protection_address** (*Optional*): KNX address for switching on/off frost/heat protection mode.
- **operation_mode_night_address** (*Optional*): KNX address for switching on/off night mode.
- **operation_mode_comfort_address** (*Optional*): KNX address for switching on/off comfort mode.
`operation_mode_frost_protection_address` / `operation_mode_night_address` / `operation_mode_comfort_address` are not necessary if `operation_mode_address` was specified.

20
source/_components/cover.knx.markdown
View File

@ -33,15 +33,17 @@ cover:
travelling_time_up: 61
```
Configuration variables:
- **name** (*Optional*): A name for this device used within Home Assistant.
- **move_long_address**: KNX group address for moving the cover full up or down.
- **move_short_address**: (*Optional*) KNX group address for moving the cover short time up or down.
- **position_address**: (*Optional*) KNX group address for moving the cover to the dedicated position.
- **position_state_address**: (*Optional*) Separate KNX group address for requesting the current position of the cover.
- **angle_address**: (*Optional*) KNX group address for moving the cover to the dedicated angle.
- **angle_state_address**: (*Optional*) Separate KNX group address for requesting the current angle of cover.
- **travelling_time_down**: (*Optional*) Time cover needs to travel down in seconds. Needed to calculate the intermediate positions of cover while traveling. Defaults to 25.
- **travelling_time_up**: (*Optional*) Time cover needs to travel up in seconds. Needed to calculate the intermediate positions of cover while traveling. Defaults to 25.
- **invert_position**: (*Optional*) Set this to true if your actuator report fully closed as 100%
- **invert_angle**: (*Optional*) Set this to true if your actuator reports tilt fully closed as 100%
- **move_short_address** (*Optional*): KNX group address for moving the cover short time up or down.
- **position_address** (*Optional*): KNX group address for moving the cover to the dedicated position.
- **position_state_address** (*Optional*): Separate KNX group address for requesting the current position of the cover.
- **angle_address** (*Optional*): KNX group address for moving the cover to the dedicated angle.
- **angle_state_address** (*Optional*): Separate KNX group address for requesting the current angle of cover.
- **travelling_time_down** (*Optional*): Time cover needs to travel down in seconds. Needed to calculate the intermediate positions of cover while traveling. Defaults to 25.
- **travelling_time_up** (*Optional*): Time cover needs to travel up in seconds. Needed to calculate the intermediate positions of cover while traveling. Defaults to 25.
- **invert_position** (*Optional*): Set this to true if your actuator report fully closed as 100%.
- **invert_angle** (*Optional*): Set this to true if your actuator reports tilt fully closed as 100%.

39
source/_components/knx.markdown
View File

@ -13,8 +13,6 @@ ha_release: 0.24
ha_iot_class: "Local Polling"
---
Overview
--------
The [KNX](http://www.knx.org) integration for Home Assistant allows you to connect to a KNX/IP devices.
@ -30,8 +28,7 @@ There is currently support for the following device types within Home Assistant:
- [Thermostat](/components/climate.knx)
- [Notify](/components/notify.knx)
Configuration
--------------
### {% linkable_title Configuration %}
To use your KNX in your installation, add the following lines to your `configuration.yaml` file:
@ -39,13 +36,14 @@ To use your KNX in your installation, add the following lines to your `configura
knx:
```
Optional, recommended for large KNX installations (>100 devices) and/or if you want to use the XKNX abstraction also for other scripted tools outside HASS:
Optional, recommended for large KNX installations (>100 devices) and/or if you want to use the XKNX abstraction also for other scripted tools outside of Home Assistant:
```yaml
knx:
config_file: '/path/to/xknx.yaml'
```
* **config_file**: (*Optional*) path for xknx configuration file.
- **config_file** (*Optional*): The path for XKNX configuration file.
If the auto detection of the KNX/IP device does not work you can specify ip/port of the tunneling device:
@ -56,9 +54,10 @@ knx:
port: 3671
local_ip: '192.168.2.109'
```
* **host**: Host of the KNX/IP tunneling device
* **port**: Port of the KNX/IP tunneling device
* **local_ip**: IP of the local interface
- **host**: Host of the KNX/IP tunneling device.
- **port**: Port of the KNX/IP tunneling device.
- **local_ip**: IP of the local interface.
Explicit connection to a KNX/IP routing device:
@ -68,7 +67,8 @@ knx:
routing:
local_ip: '192.168.2.109'
```
* **local_ip**: local ip of interface (which should be used for multicasting)
- **local_ip**: The local IP address of interface (which should be used for multicasting).
```yaml
knx:
@ -76,13 +76,11 @@ knx:
fire_event_filter: ["1/0/*", "6/2,3,4-6/*"]
```
* **fire_event** (*Optional*): If set to True, platform will write all received KNX messages to event bus
* **fire_event_filter** (*Optional*): If `fire_event` is set `fire_event_filter` has to be specified. `fire_event_filter` defines a list of patterns for filtering KNX addresses. Only telegrams which match this pattern are sent to the HASS event bus.
- **fire_event** (*Optional*): If set to True, platform will write all received KNX messages to event bus
- **fire_event_filter** (*Optional*): If `fire_event` is set `fire_event_filter` has to be specified. `fire_event_filter` defines a list of patterns for filtering KNX addresses. Only telegrams which match this pattern are sent to the HOme Assistant event bus.
- **state_updater** (*Optional*): The component will collect the current state of each configured device from the KNX bus to display it correctly within Home-Assistant. Set this option to False to prevent this behaviour.
* **state_updater** (*Optional*): The component will collect the current state of each configured device from the KNX bus to display it correctly within Home-Assistant. Set this option to False to prevent this behaviour.
Service
-------
### {% linkable_title Services %}
In order to directly interact with the KNX bus, you can now use the following service:
@ -96,12 +94,7 @@ Service Data: {"address": "1/0/15", "payload": 0}
* **payload**: Payload, either an integer or an array of integers
### {% linkable_title Known issues %}
Known issues:
-------------
Due to lame multicast support the routing abstraction and the gateway scanner
only work with python >=3.5.
Due to lame multicast support the routing abstraction and the gateway scanner only work with Python >=3.5.

18
source/_components/light.knx.markdown
View File

@ -21,23 +21,21 @@ The `knx` component must be configured correctly, see [KNX Component](/component
To use your KNX light in your installation, add the following lines to your `configuration.yaml` file:
```yaml
# Example configuration.yaml entry
light:
- platform: knx
name: Kitchen-Light-1
address: '1/0/9'
brightness_address: '1/0/11'
- platform: knx
name: Kitchen-Light-2
address: '1/0/12'
brightness_address: '1/0/14'
```
* **name** (*Optional*): A name for this device used within Home Assistant.
* **address**: KNX group address for switching the light on and off
* **brightness_address**: (Optional) KNX group address for dimming light.
* **state_address**: (*Optional*) separate KNX group address for retrieving the switch state of the light.
* **brightness_state_address**: (*Optional*) separate KNX group address for retrieving the dimmed state of the light.
Configuration variables:
- **name** (*Optional*): A name for this device used within Home Assistant.
- **address**: KNX group address for switching the light on and off.
- **brightness_address** (Optional): KNX group address for dimming light.
- **state_address** (*Optional*): separate KNX group address for retrieving the switch state of the light.
- **brightness_state_address** (*Optional*): separate KNX group address for retrieving the dimmed state of the light.
Some KNX devices can change their state internally without any messages on the KNX bus, e.g., if you configure a timer on a channel. The optional `state_address` can be used to inform Home Assistant about these state changes. If a KNX message is seen on the bus addressed to the given state address, this will overwrite the state of the switch object.
For switching/light actuators that are only controlled by a single group address and can't change their state internally, you don't have to configure the state address.

19
source/_components/sensor.knx.markdown
View File

@ -26,26 +26,13 @@ sensor:
name: Heating.Valve1
address: '2/0/0'
type: 'percent'
- platform: knx
name: Kitchen.Temperature
address: '6/2/1'
type: 'temperature'
- platform: knx
name: Wind speed
type: speed_ms
address: 1/0/0
- platform: knx
name: Lux
type: illuminance
address: 1/0/1
```
* **name** (*Optional*): A name for this device used within Home Assistant.
* **address**: KNX group address of the sensor
* **type**: (Optional) "percent", "temperature", "illuminance", "speed_ms", "current"
- **name** (*Optional*): A name for this device used within Home Assistant.
- **address**: KNX group address of the sensor.
- **type** (Optional): "percent", "temperature", "illuminance", "speed_ms", "current".