Added the AI-on-the-edge-device (#25222)

Co-authored-by: Franck Nijhof <frenck@frenck.nl>

source/_docs/energy/electricity-grid.markdown

@@ -45,6 +45,12 @@ We have developed [Home Assistant Glow](https://github.com/klaasnicolaas/home-as
 
 ![Photo of Home Assistant Glow attached to an electricity meter](/images/docs/energy/home-assistant-glow.jpg)
 
+#### Read the meter using an AI-on-the-edge-device
+
+[AI-on-the-edge-device](https://github.com/jomjol/AI-on-the-edge-device) is a project running on an ESP32-CAM and can be fully integrated into Home Assistant using the Home Assistant discovery functionality of MQTT. It digitalizes your gas/water/electricity meter display and provides its data in various ways. 
+
+![Photo of the AI-on-the-edge-device Workflow](/images/docs/energy/ai-on-the-edge-device.jpg)
+
 ### Using a CT clamp sensor
 
 CT clamp sensors measure your energy usage by looking at the current passing through an electrical wire. This makes it possible to calculate the energy usage. In Home Assistant we have support for off-the-shelf CT clamp sensors and you can build your own.

source/_docs/energy/gas.markdown

@@ -22,3 +22,10 @@ The P1 port is a standardized port on electricity meters in the Netherlands, Bel
 We have worked with creator [Marcel Zuidwijk](https://www.zuidwijk.com) to develop [SlimmeLezer+](https://www.zuidwijk.com/product/slimmelezer-plus/). It's an affordable P1 reader powered by [ESPHome](https://esphome.io) that will seamlessly integrate this information in Home Assistant. It is being sold on [his website](https://www.zuidwijk.com/product/slimmelezer-plus/) and the firmware is open source [on GitHub](https://github.com/zuidwijk/dsmr).
 
 ![Photo of SlimmeLezer attached to a smart electricity meter](/images/docs/energy/slimmelezer.jpg)
+
+#### Read the Gas Meter using an AI-on-the-edge-device
+
+[AI-on-the-edge-device](https://github.com/jomjol/AI-on-the-edge-device) is a project running on an ESP32-CAM and can be fully integrated into Home Assistant using the Home Assistant Discovery Functionality of MQTT. It digitalizes your gas/water/electricity meter display and provides its data in various ways. 
+
+![Photo of the AI-on-the-edge-device Workflow](/images/docs/energy/ai-on-the-edge-device.jpg)
+

source/_docs/energy/water.markdown

@@ -24,6 +24,11 @@ Alternatively, the following shops sell ESPHome-based devices, that use a proxim
 - [Slimme Watermeter Gateway](https://smartgateways.nl/product/slimme-watermeter-gateway/) (Dutch)
 - [watermeterkit.nl](https://watermeterkit.nl/) (Dutch)
 
-Maybe you like to build one yourself? Pieter Brinkman has quite a [nice blog article on how to create your own water sensor](https://www.pieterbrinkman.com/2022/02/02/build-a-cheap-water-usage-sensor-using-esphome-home-assistant-and-a-proximity-sensor/) using ESPHome, or [build a water meter](https://www.ztatz.nl/p1-monitor-watermeter/) that works with the [P1 Monitor](/integrations/p1_monitor) integration.
+Maybe you like to build one yourself?
+ - Pieter Brinkman has quite a [nice blog article on how to create your own water sensor](https://www.pieterbrinkman.com/2022/02/02/build-a-cheap-water-usage-sensor-using-esphome-home-assistant-and-a-proximity-sensor/) using ESPHome, or [build a water meter](https://www.ztatz.nl/p1-monitor-watermeter/) that works with the [P1 Monitor](/integrations/p1_monitor) integration.
+ - [AI-on-the-edge-device](https://github.com/jomjol/AI-on-the-edge-device) is a project running on an ESP32-CAM and can be fully integrated into Home Assistant using the Home Assistant Discovery Functionality of MQTT. It digitalizes your gas/water/electricity meter display and provides its data in various ways. 
+ 
+![Photo of the AI-on-the-edge-device Workflow](/images/docs/energy/ai-on-the-edge-device.jpg)
+
 
 For any of the above-listed options, make sure it actually works with the type of water meter you have before getting one.