From fd46e7ec0f0b02b02cd45abba4eaccdbadb04518 Mon Sep 17 00:00:00 2001 From: Martin Date: Tue, 27 Jun 2023 17:31:45 +0200 Subject: [PATCH] Update rfxtrx.markdown (#27985) Add MHz --- source/_integrations/rfxtrx.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_integrations/rfxtrx.markdown b/source/_integrations/rfxtrx.markdown index 9d846fb4dc2..a0f82ccb5ac 100644 --- a/source/_integrations/rfxtrx.markdown +++ b/source/_integrations/rfxtrx.markdown @@ -59,7 +59,7 @@ logger: Not all protocols as advertised are enabled on the initial setup of your transceiver. Enabling all protocols is not recommended either. The RFXcom transceiver loses significant sensitivity when more protocols are enabled. **Warning**: enabling the "BlindsT0" protocol blocks receiving any other protocol. -If your 433.92 product is not showing in the logs, you may need to enable additional protocols. You can do this by configuring the device itself using [RFXmgmr](http://www.rfxcom.com/epages/78165469.sf/en_GB/?ViewObjectPath=%2FShops%2F78165469%2FCategories%2FDownloads) to enable the required protocol, or you can configure the device in Home Assistant by configuring the [Protocols](#protocols). +If your 433.92 MHz product is not showing in the logs, you may need to enable additional protocols. You can do this by configuring the device itself using [RFXmgmr](http://www.rfxcom.com/epages/78165469.sf/en_GB/?ViewObjectPath=%2FShops%2F78165469%2FCategories%2FDownloads) to enable the required protocol, or you can configure the device in Home Assistant by configuring the [Protocols](#protocols). ## ser2net