---
title: Schlage
description: Instructions on how to integrate Schlage WiFi smart locks into Home Assistant.
ha_category:
  - Lock
  - Sensor
  - Switch
ha_release: 2023.9
ha_iot_class: Cloud Polling
ha_config_flow: true
ha_codeowners:
  - '@dknowles2'
ha_platforms:
  - binary_sensor
  - diagnostics
  - lock
  - select
  - sensor
  - switch
ha_integration_type: integration
ha_domain: schlage
---

The Schlage integration provides connectivity with Schlage WiFi smart locks through Schlage's cloud API.

## Known working devices

- Schlage Encode Smart WiFi Deadbolt
- Schlage Encode Smart WiFi Lever
- Schlage Encode Plus Smart WiFi Deadbolt

Other devices not listed above have not been tested and may not function as expected.

There is currently support for the following device types within Home Assistant:

- Binary sensor
- Lock
- Sensor
- Switch

{% include integrations/config_flow.md %}

## Data updates

The Schlage integration fetches updated lock state data every 30 seconds.

## Binary sensor

Once you have enabled the Schlage integration, you should see the following binary sensor:

- **Keypad disabled** - Indicates that the keypad has been disabled, typically due to too many incorrect lock codes being attempted.

## Select

Once you have enabled the Schlage integration, you should see the following selects:

- **Auto Lock Time** - Configure the time until the deadbolt automatically locks, or disable the auto-lock feature entirely. For example, `0`: auto-lock is disabled, `15`: auto-lock after 15 seconds, `300`: auto-lock after 5 minutes.

## Sensor

Once you have enabled the Schlage integration, you should see the following sensors:

- Lock Battery

## Switch

Once you have enabled the Schlage integration, you should see the following switches:

- **1-Touch Locking** - When enabled, locks the lock with a press of the Schlage button.
- **Keypress Beep** - Controls whether the lock will emit beeping tones on use.

## Removing the integration

This integration follows standard integration removal. No extra steps are required.

{% include integrations/remove_device_service.md %}