--- layout: page title: "Harmony Hub Remote" description: "Instructions how to integrate Harmony Hub remotes into Home Assistant." date: 2016-11-05 17:00 sidebar: true comments: false sharing: true footer: true logo: logitech.png ha_category: Remote ha_iot_class: "Local Polling" ha_release: "0.34" --- The `harmony` remote platform allows you to control the state of your [Harmony Hub Device](http://www.logitech.com/en-us/product/harmony-hub). Supported units: - Harmony Hub - Harmony Companion - Harmony Pro - Harmony Elite The preferred way to setup the Harmony remote is by enabling the [discovery component](/components/discovery/). However, if you want to manually configure the device, you will need to add its settings to your `configuration.yaml`. ```yaml # Example configuration.yaml entry remote: - platform: harmony name: Bedroom host: 10.168.1.13 # The IP of your hub ``` You can override some default configuration values on a discovered hub (e.g. the `port` or `activity`) by adding a `configuration.yaml` setting. In this case leave the `host` setting empty so the platform will discover the host IP automatically, but set the `name` in the config to match exactly the name you have set for your Hub so the platform knows what Hub you are trying to configure. ```yaml # Example configuration.yaml entry with discovery - platform: harmony name: Living Room # This name must match the name you have set on the Hub activity: Watch TV # Overriding the 'activity' setting for this discovered hub ``` Configuration variables: - **name** (*Required*): The hub's name to display in the frontend. - **host** (*Optional*): The Harmony device's IP address. Leave empty for the IP to be discovered automatically. - **port** (*Optional*): The Harmony device's port. Defaults to 5222. - **activity** (*Optional*): Activity to use when turnon service is called without any data. - **scan_interval** (*Optional*): Amount in seconds in between polling for device's current activity. Defaults to 30 seconds. Configuration file: Upon startup one file will be written to your Home Assistant configuration directory per device in the following format: `harmony_REMOTENAME.conf`. The file will contain: - List of all programmed activity names and ID numbers - List of all programmed device names and ID numbers - List of all available commands per programmed device Supported services: - **Turn Off**: Turn off all devices that were switched on from the start of the current activity.s - **Turn On**: Start an activity, will start the default activity from configuration.yaml if no activity is specified. The specified activity can either be the activity name or the activity ID from the configuration file written to your [Home Assistant configuration directory](/docs/configuration/). The service will respond faster if the activity ID is passed instead of the name. - **Send Command**: Send a single command or a set of commands to one device, device ID and available commands are written to the configuration file at startup. You can optionally specify the number of times you wish to repeat the command(s) and delay you want between repeated command(s). - **Sync**: Synchronizes the Harmony device with the Harmony web service if any changes are made from the web portal or app. ### {% linkable_title Examples %} A template switch can be used to display and control the state of an activity in the frontend. ```yaml switch: - platform: template switches: tv: value_template: "{% raw %}{% if is_state('remote.family_room', 'on') %}on{% else %}off{% endif %}{% endraw %}" turn_on: service: remote.turn_on entity_id: remote.family_room turn_off: service: remote.turn_off entity_id: remote.family_room ``` Template sensors can be utilized to display current activity in the frontend. ```yaml sensor: - platform: template sensors: family_room: value_template: {% raw %}'{{ states.remote.family_room.attributes.current_activity }}'{% endraw %} friendly_name: 'Family Room' bedroom: value_template: {% raw %}'{{ states.remote.bedroom.attributes.current_activity }}'{% endraw %} friendly_name: 'bedroom' ``` The example below shows how to control an `input_boolean` switch using the Harmony remote's current activity. The switch will turn on when the remote's state changes and the Kodi activity is started and off when the remote's state changes and the current activity is PowerOff. ```yaml automation: - alias: "Watch TV started from harmony hub" trigger: platform: state entity_id: remote.family_room condition: condition: template value_template: {% raw %}'{{ trigger.to_state.attributes.current_activity == "Kodi" }}'{% endraw %} action: service: input_boolean.turn_on entity_id: input_boolean.notify - alias: "PowerOff started from harmony hub" trigger: platform: state entity_id: remote.family_room condition: condition: template value_template: {% raw %}'{{ trigger.to_state.attributes.current_activity == "PowerOff" }}'{% endraw %} action: service: input_boolean.turn_off entity_id: input_boolean.notify ```` The automation example below shows how to send a command via the harmony remote using the `send_command` service to send the 'Pause' command to the hub, which is already defined as an IR code for each device to be used via the Harmony app. It is checking for the activity name as exposed through the sensor in the harmony remote component using Jinja if statements to set the device_id, sending the correct Pause command for the given activity. This requires checking your activity list and device_id from the `harmony_REMOTENAME.conf` file created when you start the component. In this example, the harmony hub is named bedroom. ```yaml automation: - alias: Harmony Pause contextual for activity trigger: # trigger happens to be from a flic button - could be any valid event platform: event event_type: flic_click event_data: button_name: flic_80e4da70bbb1 click_type: double action: service: remote.send_command data_template: # using a data template to have if brances for relevant device # Always the same entity_id - the harmony hub entity_id: remote.bedroom # Always the same command - the Pause key command: Pause # select device based upon the activity being undertaken. device: > # when in WATCH TV activity, the pause key relates to a TiVo, which is device 22987101 {% raw %}{% if is_state("sensor.bedroom", "WATCH TV") %}{% raw %} 22987101 # when in WATCH APPLE TV activity, the pause key relates to an Apple TV, which is device 23002316 {% raw %}{% elif is_state("sensor.bedroom", "WATCH APPLE TV") %}{% endraw %} 23002316 {% raw %}{% elif is_state("sensor.bedroom", "PLEX") %}{% endraw %} 23048786 {% raw %}{% elif is_state("sensor.bedroom", "WATCH BLU RAY") %}{% endraw %} 23043122 {% raw %}{% endif %}{% endraw %} ````