---
layout: page
title: "Raspberry Pi GPIO Binary Sensor"
description: "Instructions on how to integrate the GPIO sensor capability of a Raspberry Pi into Home Assistant."
date: 2015-08-30 19:00
sidebar: true
comments: false
sharing: true
footer: true
logo: raspberry-pi.png
ha_category: DIY
ha_release: pre 0.7
ha_iot_class: "Local Push"
---

The `rpi_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [Raspberry Pi](https://www.raspberrypi.org/).

## {% linkable_title Configuration %}

To use your Raspberry Pi's GPIO in your installation, add the following to your `configuration.yaml` file:

```yaml
# Example configuration.yaml entry
binary_sensor:
  - platform: rpi_gpio
    ports:
      11: PIR Office
      12: PIR Bedroom
```

{% configuration %}
ports:
  description: List of used ports.
  required: true
  type: map
  keys:
    "port: name":
      description: The port numbers (BCM mode pin numbers) and corresponding names.
      required: true
      type: string
bouncetime:
  description: The time in milliseconds for port debouncing.
  required: false
  type: integer
  default: 50
invert_logic:
  description: If `true`, inverts the output logic to ACTIVE LOW.
  required: false
  type: boolean
  default: "`false` (ACTIVE HIGH)"
pull_mode:
  description: >
    Type of internal pull resistor to use.
    Options are `UP` - pull-up resistor and `DOWN` - pull-down resistor.
  required: false
  type: string
  default: "`UP`"
{% endconfiguration %}

For more details about the GPIO layout, visit the Wikipedia [article](https://en.wikipedia.org/wiki/Raspberry_Pi#GPIO_connector) about the Raspberry Pi.