--- title: Insteon description: Instructions on how to set up an Insteon Modem (PLM or Hub) locally within Home Assistant. ha_category: - Hub - Binary Sensor - Cover - Fan - Light - Sensor - Switch ha_iot_class: Local Push ha_release: 0.39 ha_domain: insteon ha_codeowners: - '@teharris1' ha_config_flow: true ha_platforms: - binary_sensor - climate - cover - fan - light - switch --- This integration adds "local push" support for INSTEON Modems allowing linked INSTEON devices to be used within Home Assistant. There is currently support for the following device types within Home Assistant: - Binary Sensor - Climate - Cover - Fan - Light - Sensor - Switch Device support is provided by the underlying [pyinsteon] package. It is known to work with the [2413U] USB and [2412S] RS242 flavors of PLM and the [2448A7] USB stick. It has also been tested to work with the [2242] and [2245] Hubs. You can configure the Insteon integration by going to the integrations page inside the configuration panel. [pyinsteon]: https://github.com/pyinsteon/pyinsteon [2413U]: https://www.insteon.com/powerlinc-modem-usb [2412S]: https://www.insteon.com/powerlinc-modem-serial [2448A7]: https://www.smarthome.com/insteon-2448a7-portable-usb-adapter.html [2245]: https://www.insteon.com/insteon-hub/ [2242]: https://www.insteon.com/support-knowledgebase/2014/9/26/insteon-hub-owners-manual ## Autodiscovery The first time autodiscovery runs, the duration may require up to 60 seconds per device. Subsequent startups will occur much quicker using cached device information. If a device is not recognized during autodiscovery, trigger the device, such as toggling a button, to force the device to send a message to the modem. The device will then be discovered. You may need to trigger the device a few times. If for any reason this approach does not work, you can add the device to a **device override** in configuration options from the integrations page inside the configuration panel. In order for a device to be discovered, it must be linked to the INSTEON Modem as either a responder or a controller. ## Linking Devices to the INSTEON Modem In order for any two Insteon devices to talk with one another, they must be linked. For an overview of device linking, please read the Insteon page on [understanding linking]. The Insteon Modem module supports All-Linking through [Developer Tools] service calls. The following services are available: - **insteon.add_all_link**: Puts the Insteon Modem (IM) into All-Linking mode. The IM can be set as a controller or a responder. If the IM is a controller, put the IM into linking mode then press the SET button on the device. If the IM is a responder, press the SET button on the device then put the IM into linking mode. - **insteon.delete_all_link**: Tells the Insteon Modem (IM) to remove an All-Link record from the All-Link Database of the IM and a device. Once the IM is set to delete the link, press the SET button on the corresponding device to complete the process. - **insteon.load_all_link_database**: Load the All-Link Database for a device. WARNING - Loading a device All-Link database may take a LONG time and may need to be repeated to obtain all records. - **insteon.print_all_link_database**: Print the All-Link Database for a device. Requires that the All-Link Database is loaded first. - **insteon.print_im_all_link_database**: Print the All-Link Database for the INSTEON Modem (IM). If you are looking for more advanced options, you can use the [insteon_tools] command-line tool that is distributed with the [pyinsteon] Python module. Please see the documentation on the [pyinsteon] GitHub site. Alternatively, you can download [HouseLinc], which runs on any Windows PC, or you can use [Insteon Terminal] which is open source and runs on most platforms. SmartHome no longer supports HouseLinc, but it still works. Insteon Terminal is a very useful tool but please read the disclaimers carefully, they are important. [understanding linking]: https://www.insteon.com/support-knowledgebase/2015/1/28/understanding-linking [Developer Tools]: /docs/tools/dev-tools/ [HouseLinc]: https://www.smarthome.com/houselinc.html [Insteon Terminal]: https://github.com/pfrommerd/insteon-terminal [insteon_tools]: https://github.com/pyinsteon/pyinsteon ## Customization The only configuration item that is necessary is the PLM port or Hub IP address, username and password so that Home Assistant can connect to the INSTEON Modem. This will expose all the supported INSTEON devices which exist in the modem’s ALL-Link database. However, devices will only be shown by their INSTEON hex address (e.g., “1A.2B.3C”) which can be a bit unwieldy. As you link and unlink devices using the ‘Set’ buttons, they’ll be added and removed from Home Assistant automatically. You can use the normal Home Assistant [device customization] section of your configuration to assign friendly names and special icons to your devices. This is especially useful for setting device_class on your binary_sensor INSTEON devices. [device customization]: /getting-started/customizing-devices/ ## Device Overrides INSTEON devices are added to Home Assistant using the platform(s) that make the most sense given the model and features of the hardware. The features of the INSTEON devices are built into the Home Assistant platform. Changing the platform is not recommended. There are two primary uses for the **device override** feature: - Devices that do not respond during autodiscovery. This is common for battery operated devices. Before using a device override, please trigger the device a few times and it will likely be discovered by Home Assistant. - Devices that have not been fully developed. This allows an unknown device to be mapped to a device that operates similarly to another device. Device overrides can be set up using the integrations page inside the configuration panel. ## INSTEON Scenes Trigger an INSTEON scene on or off, is done via automations. Two services are provided to support this feature: - **insteon.scene_on** - **group**: (required) The INSTEON scene number to trigger. - **insteon.scene_off** - **group**: (required) The INSTEON scene to turn off ```yaml automation: # Trigger an INSTEON scene 25 - id: trigger_scene_25_on alias: "Turn on scene 25" action: - service: insteon.scene_on group: 25 ``` ## Events and Mini-Remotes Mini-Remote devices do not appear as Home Assistant entities, they generate events. The following events are available: - **insteon.button_on** - **address**: (required) The Insteon device address in lower case without dots (e.g., 1a2b3c) - **button**: (Optional) The button id in lower case. For a 4-button remote the values are `a` to `d`. For an 8 button remote the values are `a` to `h`. For a one-button remote this field is not used. - **insteon.button_off** - **address**: (required) The Insteon device address in lower case without dots (e.g., 1a2b3c) - **button**: (Optional) The button id in lower case. For a 4-button remote the values are a to d. For an 8 button remote the values are `a` to `h`. For a one-button remote this field is not used. This allows the mini-remotes to be configured as triggers for automations. Here is an example of how to use these events for automations: ```yaml automation: # 4 or 8 button remote with button c pressed - id: light_on alias: "Turn a light on" trigger: - platform: event event_type: insteon.button_on event_data: address: 1a2b3c button: c condition: - condition: state entity_id: light.some_light state: "off" action: - service: light.turn_on target: entity_id: light.some_light # single button remote - id: light_off alias: "Turn a light off" trigger: - platform: event event_type: insteon.button_on event_data: address: 1a2b3c condition: - condition: state entity_id: light.some_light state: "off" action: - service: light.turn_on target: entity_id: light.some_light ``` ## Manual configuration Manual configuration is not required as all configuration options are available through the integrations page inside the configuration panel. However, manual setup is available using the following settings. To set up an INSTEON Powerline Modem (PLM) device such as the [2413U], use the following configuration: ```yaml # PLM configuration variables insteon: port: SERIAL_PORT ``` To set up an INSTEON Hub model [2245], use the following configuration: ```yaml # Hub 2245 configuration variables insteon: host: HOST ip_port: IP_PORT username: USERNAME password: PASSWORD hub_version: 2 ``` To set up an INSTEON Hub model [2242], use the following configuration: ```yaml # Hub 2242 configuration variables insteon: host: HOST hub_version: 1 ``` Additional configuration items are available: ```yaml insteon: device_override: - address: ADDRESS cat: CATEGORY subcat: SUBCATEGORY firmware: FIRMWARE product_key: PRODUCT_KEY x10_devices: - housecode: HOUSECODE unitcode: UNITCODE platform: PLATFORM steps: STEPS ``` {% configuration %} port: description: The serial or USB port for your device, e.g., `/dev/ttyUSB0` or `COM3`. Required for PLM setup. required: false type: string host: description: The hostname or IP address of the Hub. Required with Hub. required: false type: string ip_port: description: The IP port number of the Hub. For Hub model [2245] (i.e., Hub version 2) the default port is 25105. For the Hub model [2242] (i.e., Hub version 1) the default port is 9761. Use the Insteon app to find the port number for your specific Hub. Optional with Hub. required: true type: integer username: description: The username to login into the local Hub. You can find your Hub username on the bottom of the Hub or you can use the Insteon app. Required for Hub version 2 setup. required: false type: string password: description: The password to login into the local Hub. You can find your Hub password on the bottom of the Hub or you can use the Insteon app. Required for Hub version 2 setup. required: false type: string hub_version: description: The Hub version number where model [2242] is Hub version 1 and model [2245] is Hub version 2. Required for Hub version 1 setup. required: false default: 2 type: integer device_override: description: Override the default device definition. required: false type: list keys: address: description: "Is found on the device itself in the form `1A.2B.3C` or `1a2b3c`. If there's no letter in the address you need to use quotation marks, e.g., `\"123456\"`, to avoid it becoming a number in YAML." required: true type: string cat: description: is found in the back of the device's User Guide in the form of 0x00 - 0xff. required: false type: integer subcat: description: is found in the back of the device's User Guide in the form of 0x00 - 0xff. required: false type: integer firmware: description: are more advanced options and will typically not be used. required: false type: string product_key: description: are more advanced options and will typically not be used. required: false type: integer x10_devices: description: Define X10 devices to control or respond to. required: false type: list keys: housecode: description: is the X10 housecode values a - p required: true type: string unitcode: description: is the X10 unit code values 1 - 16 required: true type: integer platform: description: "is the Home Assistant Platform to associate the device with. The following platforms are supported: binary_sensor: Used for on/off devices or keypad buttons that are read-only. light: Used for dimmable X10 devices. switch: Used for On/Off X10 devices." required: true type: string dim_steps: description: is the number of dim/bright steps the device supports. Used for dimmable X10 devices only. required: false default: 22 type: integer {% endconfiguration %} ### Autodiscovery The first time autodiscovery runs, the duration may require up to 60 seconds per device. Subsequent startups will occur much quicker using cached device information. If a device is not recognized during autodiscovery, trigger the device, such as toggling a button, to force the device to send a message to the modem. The device will then be discovered. You may need to trigger the device a few times. If for any reason this approach does not work, you can add the device to the **device_override** configuration. In order for a device to be discovered, it must be linked to the INSTEON Modem as either a responder or a controller. ### Linking Devices to the INSTEON Modem In order for any two Insteon devices to talk with one another, they must be linked. For an overview of device linking, please read the Insteon page on [understanding linking]. The Insteon Modem module supports All-Linking through [Developer Tools] service calls. The following services are available: - **insteon.add_all_link**: Puts the Insteon Modem (IM) into All-Linking mode. The IM can be set as a controller or a responder. If the IM is a controller, put the IM into linking mode then press the SET button on the device. If the IM is a responder, press the SET button on the device then put the IM into linking mode. - **insteon.delete_all_link**: Tells the Insteon Modem (IM) to remove an All-Link record from the All-Link Database of the IM and a device. Once the IM is set to delete the link, press the SET button on the corresponding device to complete the process. - **insteon.load_all_link_database**: Load the All-Link Database for a device. WARNING - Loading a device All-Link database may take a LONG time and may need to be repeated to obtain all records. - **insteon.print_all_link_database**: Print the All-Link Database for a device. Requires that the All-Link Database is loaded first. - **insteon.print_im_all_link_database**: Print the All-Link Database for the INSTEON Modem (IM). If you are looking for more advanced options, you can use the [insteon_tools] command line tool that is distributed with the [pyinsteon] Python module. Please see the documentation on the [pyinsteon] GitHub site. Alternatively, you can download [HouseLinc] which runs on any Windows PC, or you can use [Insteon Terminal] which is open source and runs on most platforms. SmartHome no longer supports HouseLinc, but it still works. Insteon Terminal is a very useful tool but please read the disclaimers carefully, they are important. [understanding linking]: https://www.insteon.com/support-knowledgebase/2015/1/28/understanding-linking [Developer Tools]: /docs/tools/dev-tools/ [HouseLinc]: https://www.smarthome.com/houselinc.html [Insteon Terminal]: https://github.com/pfrommerd/insteon-terminal [insteon_tools]: https://github.com/pyinsteon/pyinsteon ### Customization The only configuration item that is necessary is the PLM port or Hub IP address, username and password so that Home Assistant can connect to the INSTEON Modem. This will expose all the supported INSTEON devices which exist in the modem’s ALL-Link database. However, devices will only be shown by their INSTEON hex address (e.g., “1A.2B.3C”) which can be a bit unwieldy. As you link and unlink devices using the ‘Set’ buttons, they’ll be added and removed from Home Assistant automatically. You can use the normal Home Assistant [device customization] section of your configuration to assign friendly names and special icons to your devices. This is especially useful for setting device_class on your binary_sensor INSTEON devices. [device customization]: /getting-started/customizing-devices/ ### Device Overrides INSTEON devices are added to Home Assistant using the platform(s) that make the most sense given the model and features of the hardware. The features of the INSTEON devices are built into the Home Assistant platform. Changing the platform is not recommended. There are two primary uses for the **device_override** feature: - Devices that do not respond during autodiscovery. This is common for battery operated devices. Before using a device override, please trigger the device a few times and it will likely be discovered by Home Assistant. - Devices that have not been fully developed. This allows an unknown device to be mapped to a device that operates similarly to another device. ### Example Configuration with Options ```yaml # Full example of Insteon configuration with a device override insteon: port: /dev/ttyUSB0 device_override: - address: a1b2c3 # Hidden Door Sensor [2845-222] cat: 0x10 subcat: 0x11 ``` ### What NOT to do Insteon Modem is a top-level integration and device discovery will identify the Home Assistant platform the device belongs in. As such, do not declare Insteon devices in other platforms. For example, this configuration will NOT work: ```yaml light: - platform: insteon address: 1a2b3c ``` ### INSTEON Scenes Trigger an INSTEON scene on or off is done via automations. Two services are provided to support this feature: - **insteon.scene_on** - **group**: (required) The INSTEON scene number to trigger. - **insteon.scene_off** - **group**: (required) The INSTEON scene to turn off ```yaml automation: # Trigger an INSTEON scene 25 - id: trigger_scene_25_on alias: "Turn on scene 25" trigger: - ... action: - service: insteon.scene_on data: group: 25 ``` ### Events and Mini-Remotes Mini-Remote devices do not appear as Home Assistant entities, they generate events. The following events are available: - **insteon.button_on** - **address**: (required) The Insteon device address in lower case without dots (e.g., 1a2b3c) - **button**: (Optional) The button id in lower case. For a 4-button remote the values are `a` to `d`. For an 8 button remote the values are `a` to `h`. For a one-button remote this field is not used. - **insteon.button_off** - **address**: (required) The Insteon device address in lower case without dots (e.g., 1a2b3c) - **button**: (Optional) The button id in lower case. For a 4-button remote the values are a to d. For an 8 button remote the values are `a` to `h`. For a one-button remote this field is not used. This allows the mini-remotes to be configured as triggers for automations. Here is an example of how to use these events for automations: ```yaml automation: # 4 or 8 button remote with button c pressed - id: light_on alias: "Turn a light on" trigger: - platform: event event_type: insteon.button_on event_data: address: 1a2b3c button: c condition: - condition: state entity_id: light.some_light state: "off" action: - service: light.turn_on target: entity_id: light.some_light # single button remote - id: light_off alias: "Turn a light off" trigger: - platform: event event_type: insteon.button_on event_data: address: 1a2b3c condition: - condition: state entity_id: light.some_light state: "off" action: - service: light.turn_on target: entity_id: light.some_light ```