--- layout: page title: "Vera" description: "Instructions on how to setup Vera Z-Wave hubs and configure devices within Home Assistant." date: 2015-03-23 20:04 sidebar: true comments: false sharing: true footer: true logo: vera.png ha_category: Hub ha_release: pre 0.7 --- The [Vera](http://getvera.com) hub is a controller mainly connecting to Z-Wave devices. Switches, Lights (inc Dimmers), Locks, Sensors, Binary sensors, and Scenes are supported - and will be automatically added when HA connects to your Vera controller. ## {% linkable_title Configuration %} To use Vera devices in your installation, add the following to your configuration.yaml file using the IP and port number of your Vera controller: ```yaml vera: vera_controller_url: http://192.168.1.161:3480/ ``` {% configuration %} vera_controller_url: description: The URL for your Vera device. required: true type: string {% endconfiguration %}
It is recommended to assign a static IP address to your Vera Controller. This ensures that it won't change IP addresses, so you won't have to change the `vera_controller_url` if it reboots and comes up with a different IP address. See your router's manual for details on how to set this up. If you need the MAC address of your Vera, check the label on the bottom.
### {% linkable_title Configure devices %} By default your switches will be added to Home Assistant as switches, however, if some of them are light switches, you can tell Home Assistant this using the optional `lights` parameter as shown below. Vera imports detailed Z-Wave devices into Home Assistant. This can include system devices and other devices that you don't use; you can tell Home Assistant not to load these devices using the `exclude:` parameter as shown below. You can find the Vera device id either via the advanced properties of the device in the Vera UI or by checking the `Vera Device Id` attribute on each device imported into Home Assistant (under the developer tools). ```yaml vera: vera_controller_url: http://192.168.1.161:3480/ # Optional to exclude devices - this is a list of vera device ids exclude: [ 13, 14, 16, 20, 23, 72, 73, 74, 75, 76, 77, 78, 88, 89, 99] # Optional to import switches as lights - this is a list of vera device ids lights: [15, 17, 19, 21, 22, 24, 26, 43, 64, 70, 87] ``` ### {% linkable_title Using Z-Wave devices in automation %} If you want to use a Z-Wave device from the Vera controller in Home Assistant automation, you'll need the entity id. In the Home Assistant UI you'll find all entities listed under the