---
layout: page
title: "LimitlessLED"
description: "Instructions on how to setup LimitlessLED within Home Assistant."
date: 2015-12-03 13:00
sidebar: true
layout: page
comments: false
sharing: true
footer: true
logo: limitlessled_logo.png
ha_category: Light
ha_iot_class: "Assumed State"
ha_release: pre 0.7
---

`limitlessled` can control your [LimitlessLED](http://www.limitlessled.com/) lights from within Home Assistant. The lights are also known as EasyBulb, AppLight, AppLamp, MiLight, LEDme, dekolight, or iLight.

### {% linkable_title Setup %}

Before configuring Home Assistant, make sure you can control your bulbs or LEDs with the MiLight mobile application. Discover your bridge(s) IP address. You can do this via your router or a mobile application like Fing ([android](https://play.google.com/store/apps/details?id=com.overlook.android.fing&hl=en) or [itunes](https://itunes.apple.com/us/app/fing-network-scanner/id430921107?mt=8)). Keep in mind that LimitlessLED bulbs are controlled via groups. You can not control an individual bulb via the bridge, unless it is in a group by itself. Note that you can assign an `rgbw` and `white` group to the same group number, effectively allowing 8 groups (4 `rgbw` and 4 `white`) per bridge.

To add `limitlessled` to your installation, add the following to your `configuration.yaml` file:

```yaml
# Example configuration.yaml entry
light:
  platform: limitlessled
  bridges:
    - host: 192.168.1.10
      groups:
      - number: 1
        name: Bedroom
      - number: 2
        type: rgbw
        name: Bathroom
    - host: 192.168.1.11
      groups:
      - number: 1
        name: Living Room & Hall
```

Configuration variables:

- **bridges** array (*Required*): 
  - **host** (*Required*): IP address of the device, eg. `192.168.1.32`
  - **version** (*Optional*): Bridge version (default is `5`). Don't use if you aren't sure.
  - **port** (*Optional*): Bridge port. Defaults to 8899.
  - **groups** array (*Required*): The list of available groups.
    - **number** (*Required*): Group number (`1`-`4`). Corresponds to the group number on the remote.
    - **name** (*Required*): Any name you'd like. Must be unique among all configured groups.
    - **type** (*Optional*): Type of group. Choose either `rgbw` or `white`. `rgbw` is the default if you don't specify this entry.

### {% linkable_title Properties %}

Refer to the [light]({{site_root}}/components/light/) documentation for general property usage, but keep in mind the following notes specific to LimitlessLED.

- **RGBW**
  - *Color*: There are 256 color possibilities along the LimitlessLED color spectrum. Color properties like saturation and lightness can not be used - only Hue can. The only exception is white (which may be warm or cold depending on the type of RGBW bulb). If you select a color with saturation or lightness, Home Assistant will calculate the nearest valid LimitlessLED color.
  - *Brightness*: There are 25 brightness steps.
- **White**
  - As you can observe on the MiLight mobile application, you can not select a specific brightness or temperature - you can only step each property up or down. There is no indication of which step you are on. This restriction, combined with the unreliable nature of LimitlessLED transmissions, means that setting white bulb properties is done on a best-effort basis. The only very reliable settings are the minimum and maximum of each property.
  - *Temperature*: There are 10 temperature steps.
  - *Brightness*: There are 10 brightness steps.
- **Transitions**
  - If a transition time is set, the group will transition between the current settings and the target settings for the duration specified. Transitions from or to white are not possible - the color will change immediately.

### {% linkable_title Initialization & Synchronization %}

When starting Home Assistant, your LimitlessLED bulbs will be set to known default values. This ensures a consistent user interface and uninterrupted turning on/off. If you control your LimitlessLED lights via the MiLight mobile application or other means while Home Assistant is running, Home Assistant can not track those changes and you may observe unexpected behavior. This is due to a LimitlessLED limitation.