--- layout: page title: "Ecobee Thermostat" description: "Instructions on how to setup the Ecobee thermostats within Home Assistant." date: 2016-08-26 18:00 sidebar: true comments: false sharing: true footer: true logo: ecobee.png ha_category: Climate ha_release: 0.9 ha_iot_class: "Cloud Push" ---

To get your Ecobee thermostats working with Home Assistant, follow the instructions for the general [Ecobee component](/components/ecobee/).

## {% linkable_title Concepts %} The Ecobee Thermostat supports the following key concepts. The _target temperature_ is the temperature that the device attempts to achieve. The target temperature is either determined by the currently active climate or it may be overridden by a hold. When the thermostat is not in auto mode, there is a single target temperature. When the thermostat is in auto operation mode, there is a pair of target temperatures: the lower target temperature determines the lowest desired temperature, while the higher target temperature determines the highest desired temperature (the thermostat will switch between heating and cooling to keep the temperature within these limits). A _climate_ is a predefined or user-defined set of states that the thermostat aims to achieve. The ecobee thermostat provides three predefined climates: Home, Away, and Sleep. The user can define additional climates. A _hold_ is an override of the target temperature defined in the currently active climate. The temperature targeted in the hold mode may be explicitly set (temperature hold), it may be derived from a reference climate (home, away, sleep, etc.), or it may be derived from a vacation defined by the thermostat. All holds are temporary. Temperature and climate holds expire when the thermostat transitions to the next climate defined in its program. A vacation hold starts at the beginning of the defined vacation period, and expires when the vacation period ends. When in _away mode_, the target temperature is permanently overridden by the target temperature defined for the away climate. The away mode is a simple way to emulate a vacation mode. The _operation mode_ of the device is the currently active operational modes that the Ecobee thermostat provides: heat, auxHeatOnly, cool, auto, and off. ## {% linkable_title Attributes %} The following attributes are provided by the Ecobee Thermostat: `name`, `temperature_unit`, `current_temperature`, `target_temperature`, `target_temperature_low`, `target_temperature_high`, `desired_fan_mode`, `fan`, `current_hold_mode`, `current_operation`, `operation_list`, `operation_mode`, `mode`, `fan_min_on_time`, `device_state_attributes`, `is_away_mode_on`, `vacation`, `climate_list`, `aux_heat`. The attributes `min_temp` and `max_temp` are meaningless constant values. ### {% linkable_title Attribute `name` %} Returns the name of the Ecobee Thermostat. | Attribute type | Description | | ---------------| ----------- | | String | Name of the Ecobee Thermostat ### {% linkable_title Attribute `temperature_unit` %} Returns the unit of measurement used for temperature by the thermostat. | Attribute type | Description | | ---------------| ----------- | | String | Name of the temperature unit ### {% linkable_title Attribute `current_temperature` %} Returns the current temperature measured by the thermostat. | Attribute type | Description | | ---------------| ----------- | | Integer | Currently measured temperature ### {% linkable_title Attribute `target_temperature` %} Returns the target temperature of the thermostat, when the thermostat is not in auto operation mode. | Attribute type | Description | | ---------------| ----------- | | Integer | Target temperature ### {% linkable_title Attribute `target_temperature_low` %} Returns the desired heating temperature set in the thermostat when in auto operation mode. | Attribute type | Description | | ---------------| ----------- | | Integer | Target temperature ### {% linkable_title Attribute `target_temperature_high` %} Returns the desired cooling temperature set in the thermostat when in auto operation mode. | Attribute type | Description | | ---------------| ----------- | | Integer | Target temperature ### {% linkable_title Attribute `desired_fan_mode` %} Returns the desired fan mode of the current operation. | Attribute type | Description | | ---------------| ----------- | | String | 'on', 'off' ### {% linkable_title Attribute `fan` %} Returns the current fan state. | Attribute type | Description | | ---------------| ----------- | | String | 'on', 'off' ### {% linkable_title Attribute `current_hold_mode` %} Returns the current temperature hold, if any. | Attribute type | Description | | ---------------| ----------- | | String | 'temp', 'vacation', 'home', 'away', etc., None ### {% linkable_title Attribute `current_operation` %} Returns the current operation of the thermostat. | Attribute type | Description | | ---------------| ----------- | | String | 'auto', 'cool', 'heat', 'off' ### {% linkable_title Attribute `operation_list` %} Returns the list of available operation modes. | Attribute type | Description | | ---------------| ----------- | | List of String | Available operation modes ### {% linkable_title Attribute `operation_mode` %} Returns the current operation mode of the thermostat. | Attribute type | Description | | ---------------| ----------- | | String | Currently active operation mode ### {% linkable_title Attribute `mode` %} Returns the climate currently active on the thermostat. The mode is returned as the user-visible name (rather than the internally used name). ### {% linkable_title Attribute `fan_min_on_time` %} Returns the current fan minimum on time. | Attribute type | Description | | ---------------| ----------- | | Integer | Current fan minimum on time in minutes ### {% linkable_title Attribute `is_away_mode_on` %} Returns whether the thermostat is in away mode (see the corresponding service for more detail). ### {% linkable_title Attribute `actual humidity` %} Returns the humidity as measured by the thermostat. | Attribute type | Description | | ---------------| ----------- | | Integer | Current humidity ### {% linkable_title Attribute `vacation` %} Returns the currently active vacation or `None`. | Attribute type | Description | | ---------------| ----------- | | String | Name of currently active vacation | ### {% linkable_title Attribute `climate_list` %} Returns the list of climates defined in the thermostat. ### {% linkable_title Attribute `aux_heat` %} Returns the current auxiliary heat state. | Attribute type | Description | | ---------------| ----------- | | String | 'on', 'off' ## {% linkable_title Services %} The following services are provided by the Ecobee Thermostat: `set_away_mode`, `set_hold_mode`, `set_temperature`, `set_operation_mode`, `fan_min_on_time`, `resume_program`. The services `set_aux_heat`, `set_humidity`, `set_fan_mode`, and `set_swing_mode` offered by the [Climate component](/components/climate/) are not implemented for this thermostat. ### {% linkable_title Service `set_away_mode` %} Turns the away mode on or off for the thermostat. | Service data attribute | Optional | Description | | ---------------------- | -------- | ----------- | | `entity_id` | yes | String or list of strings that point at `entity_id`'s of climate devices to control. Else targets all. | `away_mode` | no | 'on' or 'off' ### {% linkable_title Service `set_hold_mode` %} Puts the thermostat into the given hold mode. For 'home', 'away', 'sleep', and any other hold based on a reference climate, the target temperature is taken from the reference climate. For 'temp', the current temperature is taken as the target temperature. When None is provided as parameter, the hold_mode is turned off. It is not possible to set a vacation hold; such hold has to be defined on the thermostat directly. However, a vacation hold can be canceled. | Service data attribute | Optional | Description | | ---------------------- | -------- | ----------- | | `entity_id` | yes | String or list of strings that point at `entity_id`'s of climate devices to control. Else targets all. | `hold_mode` | no | 'temp', 'home', 'away', 'sleep', etc., None ### {% linkable_title Service `set_temperature` %} Puts the thermostat into a temporary hold at the given temperature. | Service data attribute | Optional | Description | | ---------------------- | -------- | ----------- | | `entity_id` | yes | String or list of strings that point at `entity_id`'s of climate devices to control. Else targets all. | `target_temp_low` | no | Desired heating target temperature (when in auto mode) | `target_temp_high` | no | Desired cooling target temperature (when in auto mode) | `temperature` | no | Desired target temperature (when not in auto mode) Only the target temperatures relevant for the current operation mode need to be provided. ### {% linkable_title Service `set_operation_mode` %} Sets the current operation mode of the thermostat. | Service data attribute | Optional | Description | | ---------------------- | -------- | ----------- | | `entity_id` | yes | String or list of strings that point at `entity_id`'s of climate devices to control. Else targets all. | `operation_mode` | no | 'auto', 'auxHeatOnly', 'cool', 'heat', 'off' ### {% linkable_title Service `fan_min_on_time` %} Sets the fan minimum on time. | Service data attribute | Optional | Description | | ---------------------- | -------- | ----------- | | `entity_id` | yes | String or list of strings that point at `entity_id`'s of climate devices to control. Else targets all. | `fan_min_on_time` | no | Desired fan minimum on time ### {% linkable_title Service `resume_program` %} Resumes the currently active schedule. | Service data attribute | Optional | Description | | ---------------------- | -------- | ----------- | | `entity_id` | yes | String or list of strings that point at `entity_id`'s of climate devices to control. Else targets all. | `resume_all` | no | true or false