---
layout: page
title: "Honeywell Thermostat"
description: "Instructions on how to integrate Honeywell thermostats within Home Assistant."
date: 2016-02-07 22:01
sidebar: true
comments: false
sharing: true
footer: true
logo: honeywell.png
ha_category: Climate
ha_release: pre 0.7
ha_iot_class: "Cloud Polling" 
---


The `honeywell` climate platform let you control [Honeywell Connected](http://getconnected.honeywell.com/en/) thermostats from Home Assistant.

<p class='note'>
This platform does NOT connect to MyTotalConnectComfort.com.  If you have a Honeywell WIFI thermostat that is connected through MyTotalConnectComfort.com, you may might to take a look at the IFTTT component which can bridge the gap between Home Assistant and MyTotalConnectComfort.com WIFI thermostats on a limited basis.
</p>

To set it up, add the following information to your `configuration.yaml` file:

```yaml
climate:
  - platform: honeywell
    username: YOUR_USERNAME
    password: YOUR_PASSWORD
    scan_interval: 600
```
<p class='note'>
Scan interval is expressed in seconds. Omitting scan_interval may result in too-frequent polling and cause you to rate-limited by Honeywell.
</p>

{% configuration %}
username:
  description: The username of an user with access.
  required: true
  type: string
password:
  description: The password for your given admin account.
  required: true
  type: string
region:
  description: Region identifier (either 'eu' or 'us').
  required: false
  default: eu
  type: string
scan_interval:
  description: Scan interval is expressed in seconds. Recommended value of 600 seconds. Omitting scan_interval may result in too-frequent polling and cause you to rate-limited by Honeywell.
  required: false
  default: 120
  type: integer
away_temperature:
  description: "(*only for eu region*) Heating setpoint when away mode is on, in deg C."
  required: false
  default: 16.0
  type: float
away_cool_temperature:
  description: "(*only for us region*) Cooling setpoint when away mode is on, in deg C."
  required: false
  default: 30.0
  type: float
away_heat_temperature:
  description: "(*only for us region*) Heating setpoint when away mode is on, in deg C."
  required: false
  default: 16.0
  type: float
{% endconfiguration %}