Please keep in mind that modern smart phones will usually turn off WiFi when they are idle. Simple trackers like this may not be reliable on their own.
You might have to install the packages for `arp` and `nmap`. On Debian based hosts (for example Hassbian and Raspbian) do so by running `$ sudo apt-get install net-tools nmap`. On a Fedora host run `$ sudo dnf -y install nmap`.If you are using [Hass.io](/hassio/) then just move forward to the configuration as all requirements are already fulfilled.
Host detection is done via Nmap's "fast scan" (`-F`) of the most frequently used 100 ports, with a host timeout of 5 seconds. To use this device tracker in your installation, add the following to your `configuration.yaml` file: ```yaml # Example configuration.yaml entry device_tracker: - platform: nmap_tracker hosts: 192.168.1.0/24 ``` {% configuration %} hosts: description: The network address to scan (in any supported Nmap format). Mixing subnets and IPs is possible. required: true type: string home_interval: description: The number of minutes Nmap will not scan this device, assuming it is home, in order to preserve the device battery. required: false type: integer exclude: description: Hosts not to include in Nmap scanning. Scanning the host where Home Assistant is running can cause problems (websocket error), so excluding that host is a good idea. required: false type: list scan_options: description: Configurable scan options for Nmap. required: false default: -F --host-timeout 5s type: string {% endconfiguration %} ## {% linkable_title Examples %} A full example for the `nmap` tracker could look like the following sample: ```yaml # Example configuration.yaml entry for Nmap # One whole subnet, and skipping two specific IPs. device_tracker: - platform: nmap_tracker hosts: 192.168.1.0/24 home_interval: 10 exclude: - 192.168.1.12 - 192.168.1.13 ``` ```yaml # Example configuration.yaml for Nmap # One subnet, and two specific IPs in another subnet. device_tracker: - platform: nmap_tracker hosts: - 192.168.1.0/24 - 10.0.0.2 - 10.0.0.15 ``` In the above example, Nmap will be call with the process: `nmap -oX - 192.168.1.1/24 10.0.0.2 10.0.0.15 -F --host-timeout 5s` An example of how the Nmap scanner can be customized: ### {% linkable_title Linux capabilities %} On Linux systems you can extend the functionality of Nmap, without having to run it as root, by using *Linux capabilities*. Be sure to specify the full path to wherever you installed Nmap: ```bash $ sudo setcap cap_net_raw,cap_net_admin,cap_net_bind_service+eip /usr/bin/nmap ``` And you can set up the device tracker as ```yaml - platform: nmap_tracker hosts: 192.168.1.1-25 scan_options: " --privileged -sP " ``` See the [device tracker component page](/components/device_tracker/) for instructions how to configure the people to be tracked.