--- title: Danfoss Air description: How to integrate Danfoss Air HRV in Home Assistant. ha_category: - Binary sensor - Climate - Sensor - Switch ha_release: 0.87 ha_iot_class: Local Polling ha_domain: danfoss_air ha_platforms: - binary_sensor - sensor - switch ha_integration_type: integration ha_quality_scale: legacy --- The **Danfoss Air** {% term integration %} allows you to access information from your Danfoss Air HRV unit. *Note*: Danfoss Air CCM only accepts one TCP connection at a time. Due to this the integration will not work while you have the HRV PC-Tool open. There is currently support for the following device types within Home Assistant: - [Binary sensor](#binary-sensor) - [Sensor](#sensor) - [Switch](#switch) To enable Danfoss Air, add the following lines to your {% term "`configuration.yaml`" %} file. {% include integrations/restart_ha_after_config_inclusion.md %} ```yaml # Example configuration.yaml entry danfoss_air: host: IP_ADDRESS_OF_CCM ``` {% configuration %} host: description: Danfoss Air CCM IP. required: true type: string {% endconfiguration %} ## Binary sensor The following binary sensor is supported. - **Bypass active:** Indicator if heat recovery is currently bypassed. ## Sensor The following sensors are supported. - **Outdoor temperature:** Outdoor air temperature. - **Supply temperature:** Air temperature of the air supplied to the house. - **Extract temperature:** Air temperature of the air extracted from the house. - **Exhaust temperature:** Exhausted air temperature. - **Remaining filter lifetime:** Remaining filter lifetime measured in percent. - **Humidity:** Relative humidity in percent. - **Fan step:** Fan step. - **Exhaust fan speed:** Exhausted fan speed. - **Supply fan speed:** Supply fan speed. - **Dial battery:** Dial battery level in percent. ## Switch The following switches are supported. - **Boost:** Switch to manually activate boost. - **Bypass:** Switch to manually activate bypass. - **Automatic bypass:** Switch to enable automatic bypass.