--- layout: page title: TCP Binary Sensor description: "Instructions on how to set up TCP binary sensors within Home Assistant." date: 2016-02-22 11:05 sidebar: true comments: false sharing: true footer: true logo: tcp_ip.png ha_category: Binary Sensor ha_release: 0.14 --- The TCP Binary Sensor is a type of [TCP Sensor](/components/sensor.tcp/) which is either "off" or "on". In order to use this sensor type, in addition to the configuration for the TCP Sensor, you must supply a `value_on` value to represent what is returned when the device is turned on. ## {% linkable_title Configuration %} To enable this sensor, add the following lines to your `configuration.yaml`: ```yaml # Example configuration.yaml entry binary_sensor: - platform: tcp name: TCP Binary Sensor host: IP_ADDRESS port: PORT payload: "r State\n" value_on: 1 timeout: 5 ``` {% configuration %} name: description: The name you'd like to give the sensor in Home Assistant. required: false type: string default: TCP Sensor host: description: The hostname/IP address to connect to. required: true type: string port: description: The port to connect to the host on. required: true type: integer payload: description: What to send to the host in order to get the response we're interested in. required: true type: string value_on: description: The value returned when the device is "on". required: true type: string value_template: description: Defines a [template](/docs/configuration/templating/#processing-incoming-data) to extract the value. required: false type: template default: entire response is the value buffer_size: description: The size of the receive buffer in bytes. Set this to a larger value if you expect to receive a response larger than the default. required: false type: integer default: 1024 timeout: description: How long in seconds to wait for a response from the service before giving up and disconnecting. required: false type: integer default: 10 {% endconfiguration %}