---
title: "Installing Home Assistant"
description: "Instructions on how to install Home Assistant."
---
The following will take you through the steps required to install Home Assistant.
1. Download the appropriate install option:
- As an image for your device:
- [Raspberry Pi 3 Model B and B+ 32bit][pi3-32] (recommended)
- [Raspberry Pi 3 Model B and B+ 64bit][pi3-64]
- [Raspberry Pi 4 Model B 32bit][pi4-32] (recommended)
- [Raspberry Pi 4 Model B 64bit][pi4-64]
- [Tinkerboard][tinker]
- [Odroid-C2][odroid-c2]
- [Odroid-N2 (Beta)][odroid-n2]
- [Odroid-XU4][odroid-xu4]
- [Intel-Nuc][intel-nuc]
- As a virtual appliance:
- [VMDK][vmdk] (VMWare Workstation)
- [VHDX][vhdx]
- [VDI][vdi]
- [QCOW2 (beta)][qcow2]
- [OVA (Beta)][Virtual Appliance]
- Not recommended Hardware:
- [Raspberry Pi][pi1]
- [Raspberry Pi Zero-W][pi0-w]
- [Raspberry Pi 2][pi2]
2. Install Home Assistant:
- Flash the downloaded image to an SD card using [balenaEtcher][balenaEtcher]. If using a Pi, we recommend at least a 32 GB SD card to avoid running out of space. On Virtual machine platforms, provide at least 32 GB of disk space for the VM.
- Load the appliance image into your virtual machine software. Choose 64-bit Linux and UEFI boot.
3. Optional - set up the Wi-Fi or static IP. There are two possible places for that:
- on a blank USB stick with a FAT32 partition having partition label `CONFIG`, while in its root directory, create the `network/my-network` file, or
- on the Home Assistant SD card's first, bootable partition (labeled `hassio-boot`, might not be auto mounted in Linux) create the `CONFIG/network/my-network` file.
For the content of this file, follow the [Home Assistant Operating System howto][hassos-network].
4. For image-based installs insert the SD card (and optional USB stick) into the device.
5. Turn on your device or virtual appliance. On first boot, it downloads the latest version of Home Assistant which takes around 20 minutes (slower/faster depending on the platform and your Internet connection).
6. You will be able to reach your installation at `http://homeassistant.local:8123` (if your router supports mDNS, otherwise see below).
We used `hassio.local` in the past, if you have a system that is installed before this naming change, you might need to use `hassio.local` instead of `homeassistant.local`.
If your router doesn't support mDNS, then you'll have to use the IP address of your Pi instead of `homeassistant.local`. For example, `http://192.168.0.9:8123`. You should be able to find the IP address of your Pi from the admin interface of your router.
If you are using a Raspberry Pi please remember to ensure you're using an [appropriate power supply][pi-power] with your Pi. Mobile chargers may not be suitable since some were only designed to provide just enough power to the device it was designed for by the manufacturer. **Do not** try to power the Pi from the USB port on a TV, computer, or similar.
Now you can [configure][configure] your install.
## Updating a Home Assistant installation
Best practice for updating a Home Assistant installation:
1. Backup your installation, using the snapshot functionality Home Assistant offers.
2. Check the release notes for breaking changes on [Home Assistant release notes](https://github.com/home-assistant/home-assistant/releases). Be sure to check all release notes between the version you are running and the one you are upgrading to. Use the search function in your browser (`CTRL + f`) and search for **Breaking Changes**.
3. Check your configuration using the [Check Home Assistant configuration](/addons/check_config/) add-on.
4. If the check passes, you can safely update. If not, update your configuration accordingly.
5. Select _Dashboard_ from the _Supervisor_ menu, and then select _Update_.
## Run a specific version on Home Assistant
For this you would need to install the [Terminal & SSH add-on][ssh] or use the console
that is available on your device by connecting a keyboard and screen.
To install the Terminal & SSH add-on, choose **Supervisor**, which is located in the sidebar and then the add-on store.
Use the web-based terminal or SSH to your Home Assistant system, or connect to the console, and run:
```bash
ha core update --version=0.XX.X
```
## Run the beta version on Home Assistant
If you would like to test next release before anyone else, you can install the beta version released every three weeks:
1. Backup your installation, using the snapshot functionality Home Assistant offers.
2. Check the [Home Assistant Beta release notes](https://rc.home-assistant.io/latest-release-notes/) for breaking changes. Be sure to check all release notes between the version you are running and the one you are upgrading to. Use the search function in your browser (`CTRL + f`) and search for **Breaking Changes**.
3. Select _System_ tab from the _Supervisor_ menu, then select _Join Beta Channel_ under _Supervisor_, then select _Reload_.
4. Select _Dashboard_ tab from the _Supervisor_ menu, and then select _Update_.
[balenaEtcher]: https://www.balena.io/etcher
[hassos-network]: https://github.com/home-assistant/operating-system/blob/dev/Documentation/network.md
[pi0-w]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi0-w-3.13.img.gz
[pi1]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi-3.13.img.gz
[pi2]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi2-3.13.img.gz
[pi3-32]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi3-3.13.img.gz
[pi3-64]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi3-64-3.13.img.gz
[pi4-32]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi4-3.13.img.gz
[pi4-64]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_rpi4-64-3.13.img.gz
[tinker]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_tinker-3.13.img.gz
[odroid-c2]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_odroid-c2-3.13.img.gz
[odroid-n2]: https://github.com/home-assistant/operating-system/releases/download/4.6/hassos_odroid-n2-4.6.img.gz
[odroid-xu4]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_odroid-xu4-3.13.img.gz
[intel-nuc]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_intel-nuc-3.13.img.gz
[vmdk]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_ova-3.13.vmdk.gz
[vhdx]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_ova-3.13.vhdx.gz
[vdi]: https://github.com/home-assistant/operating-system/releases/download/3.13/hassos_ova-3.13.vdi.gz
[qcow2]: https://github.com/home-assistant/operating-system/releases/download/4.6/hassos_ova-4.6.qcow2.gz
[Virtual Appliance]: https://github.com/home-assistant/operating-system/releases/download/4.6/hassos_ova-4.6.ova
[local]: http://homeassistant.local:8123
[samba]: /addons/samba/
[ssh]: /addons/ssh/
[pi-power]: https://www.raspberrypi.org/help/faqs/#powerReqs
[configure]: /getting-started/configuration/