---
title: devolo Home Control
description: Instructions on how to integrate devolo Home Control with Home Assistant.
ha_category:
  - Binary sensor
  - Climate
  - Cover
  - Light
  - Sensor
  - Siren
  - Switch
ha_release: '0.110'
ha_iot_class: Local Push
ha_config_flow: true
ha_codeowners:
  - '@2Fake'
  - '@Shutgun'
ha_domain: devolo_home_control
ha_platforms:
  - binary_sensor
  - climate
  - cover
  - diagnostics
  - light
  - sensor
  - siren
  - switch
ha_zeroconf: true
ha_integration_type: hub
---

[devolo](https://www.devolo.global) Home Control is a Z-Wave ecosystem with a [Z-Wave to IP gateway](https://www.devolo.de/devolo-home-control-zentrale) in the center. The {% term integration %} allows you to control devices connected to the gateway.

{% include integrations/config_flow.md %}

{% configuration_basic %}
Email / mydevolo ID:
  description: "Email address you used to register the central unit at mydevolo."
Password:
  description: "Password of your mydevolo account."
{% endconfiguration_basic %}

{% note %}
Your mydevolo account is only used to acquire local credentials. Afterward, communication is completely local as long as the gateway is within the same network.
{% endnote %}


## Supported devices and functions

### Switches

The integration provides support for the following Z-Wave devices:

- devolo Metering Plug v1
- devolo Metering Plug v2
- devolo Switch FM
- Qubino Flush 1 Relay
- Qubino Flush 1D Relay
- Fibaro Wall Plug
- Fibaro Double Relay Switch

### Binary sensors

The integration provides support for the following Z-Wave devices:

- devolo Door/Window Contact
- devolo Flood Sensor
- devolo Key-Fob Switch
- devolo Motion Sensor
- devolo Smoke Detector
- devolo Wall Switch
- Fibaro Floor Sensor
- Fibaro Motion Sensor
- Fibaro Smoke Sensor

The integration provides support for the following features:

- Overload alarm sensor of various switches
- Sensors I2 and I3 of devolo and Qubino flush mounted relays

### Cover

The integration provides support for the following Z-Wave devices:

- devolo Shutter FM
- Qubino Flush Shutter

### Climate

The integration provides support for the following Z-Wave devices:

- devolo Radiator Thermostat
- Danfoss Living Connect Z Radiator Thermostat

### Lights

The integration provides support for the following Z-Wave devices:

- devolo Dimmer FM
- Qubino Flush Dimmer

### Sensor

The integration provides support for the following features:

- Temperature and brightness of devolo Sensors, that support it
- Consumptions of devolo and Qubino devices, that support it
- Voltage of devolo Metering Plug v2

### Siren

The integration provides support for the following Z-Wave devices:

- devolo Siren

## Removing the integration

This integration follows standard integration removal. No extra steps are required.

{% include integrations/remove_device_service.md %}