Odroid C2: update u-boot

board/odroidc2/boot.ini

@@ -22,7 +22,7 @@ ODROIDC2-UBOOT-CONFIG
 
 # 1080 Lines (1920x1080)
 # setenv m "1080i60hz" # Interlaced 60Hz
-#setenv m "1080p60hz" # Progressive 60Hz
+setenv m "1080p60hz" # Progressive 60Hz
 # setenv m "1080i50hz" # Interlaced 50Hz
 # setenv m "1080p50hz" # Progressive 50Hz
 # setenv m "1080p24hz" # Progressive 24Hz
@@ -40,9 +40,10 @@ ODROIDC2-UBOOT-CONFIG
 ### VESA modes ###
 # setenv m "640x480p60hz"
 # setenv m "800x480p60hz"
+# setenv m "480x800p60hz"
 # setenv m "800x600p60hz"
 # setenv m "1024x600p60hz"
- setenv m "1024x768p60hz"  
+# setenv m "1024x768p60hz"  
 # setenv m "1280x800p60hz"
 # setenv m "1280x1024p60hz"
 # setenv m "1360x768p60hz"
@@ -62,9 +63,9 @@ setenv m_bpp "32"
 # setenv m_bpp "16"
 
 # HDMI DVI/VGA modes
-# Uncomment only a single Line! The line with setenv written.
+# By default its set to HDMI, if needed change below.
-# At least one mode must be selected.
+# Uncomment only a single Line.
-# setenv vout "dvi"
+setenv vout "dvi"
 # setenv vout "vga"
 
 # HDMI HotPlug Detection control
@@ -72,24 +73,54 @@ setenv m_bpp "32"
 # true = HDMI will believe that cable is always connected
 # false = will let board/monitor negotiate the connection status
 setenv hpd "true"
-# setenv hpd "false"
 
 # Meson Timer
 # 1 - Meson Timer
 # 0 - Arch Timer 
-# Using meson_timer improves the video playback whoever it breaks KVM (virtualization).
+# Using meson_timer improves the video playback however it breaks KVM (virtualization).
 # Using arch timer allows KVM/Virtualization to work however you'll experience poor video
 setenv mesontimer "1"
 
-# Server Mode (aka. No Graphics)
+# UHS (Ultra High Speed) MicroSD mode enable/disable
-# Setting nographics to 1 will disable all video subsystem
+setenv disableuhs "false"
-# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
+
-setenv nographics "0"
+# MicroSD Card Detection enable/disable
+# Force the MMC controlled to believe that a card is connected.
+setenv mmc_removable "true"
+
+# USB Multi WebCam tweak
+# Only enable this if you use it.
+setenv usbmulticam "false"
+
+# CPU Frequency / Cores control
+###########################################
+### WARNING!!! WARNING!!! WARNING!!!
+# Before changing anything here please read the wiki entry: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
+#
+# MAX CPU's
+# setenv maxcpus "1"
+# setenv maxcpus "2"
+# setenv maxcpus "3"
+setenv maxcpus "4"
+
+# MAX Frequency
+# setenv max_freq "2016"  # 2.016GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1920"  # 1.920GHz
+# setenv max_freq "1896"  # 1.896GHz
+# setenv max_freq "1752"  # 1.752GHz
+# setenv max_freq "1680"  # 1.680GHz
+# setenv max_freq "1656"  # 1.656GHz
+setenv max_freq "1536"  # 1.536GHz
+
+
 
 ###########################################
 
 # Boot Arguments
-setenv bootargs "console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait ro no_console_suspend panic=10 quiet loglevel=1 ipv6.disable=1 hdmimode=${m} m_bpp=${m_bpp} vout=${vout} net.ifnames=0 elevator=noop disablehpd=${hpd}"
+setenv bootargs "console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait ro no_console_suspend panic=10 quiet loglevel=1 ipv6.disable=1 net.ifnames=0 elevator=noop hdmimode=${m} m_bpp=${m_bpp} vout=${vout} disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
 
 # Booting
 

board/odroidc2/mkimage.sh

@@ -7,10 +7,8 @@ export BOARD=$(basename ${BOARD_DIR})
 export IMG_DIR=${BOARD_DIR}/../../output/${BOARD}/images/
 export UBOOT_BIN=${IMG_DIR}/u-boot.bin
 export UBOOT_SEEK=97
-BL1=${IMG_DIR}/bl1.bin.hardkernel
 
 source ${COMMON_DIR}/mkimage.sh
 
-dd conv=notrunc if=${BL1} of=${DISK_IMG} bs=1 count=442
+dd conv=notrunc if=${UBOOT_BIN} of=${DISK_IMG} bs=1 count=442
-dd conv=notrunc if=${BL1} of=${DISK_IMG} bs=512 skip=1 seek=1
+dd conv=notrunc if=${UBOOT_BIN} of=${DISK_IMG} bs=512 skip=1 seek=1
-