configs/qemu: bump to the latest kernel version

Drop m68k-mcf5208 kernel patch since it's upstream.

Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.8.1   2.6.0           YES     OK (3)
arm_versatile           4.8.1   2.5.0           YES     OK
arm_vexpress            4.8.1   2.5.0           YES     OK
m68k_mcf5208            4.8.1   2.5.0           YES     OK
m68k_q800               4.8.1   q800-v2.4.0     NO (2)  OK
microblazebe            4.8.1   2.5.0           YES     OK
microblazeel            4.8.1   2.5.0           YES     OK
mips32r2el_malta        4.8.1   2.5.0           YES     OK
mips32r2_malta          4.8.1   2.5.0           YES     OK
mips32r6el_malta        4.8.1   2.6.0           YES     OK (3)
mips32r6_malta          4.8.1   2.6.0           YES     OK (3)
mips64el_malta          4.8.1   2.5.0           YES     OK
mips64_malta            4.8.1   2.5.0           YES     OK
mips64r6el_malta        4.8.1   2.7.0           YES     OK (3)(4)
mips64r6_malta          4.8.1   2.7.0           YES     OK (3)(4)
ppc_g3beige             4.8.1   2.5.0           YES     OK
ppc_mpc8544ds           4.8.1   2.5.0           YES     OK
ppc_virtex_ml507        4.8.1   2.5.0           NO      OK
ppc64_pseries           4.8.1   2.5.0           YES     OK
sh4                     4.8.1   2.5.0           YES     OK
sh4eb                   4.8.1   2.5.0           NO (1)  OK
sparc_ss10              4.8.1   2.5.0           YES     OK
sparc64_sun4u           4.8.1   2.5.0           YES     OK
sparc_sun4u             4.8.1   2.5.0           YES     OK
x86                     4.8.1   2.5.0           YES     OK
x86_64                  4.8.1   2.5.0           YES     OK
xtensa_lx60             4.8.1   2.6.0           YES     OK
xtensa_lx60_nommu       4.8.1   2.6.0           YES     OK

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch

@@ -1,45 +0,0 @@
-m68knommu: fix user a5 register being overwritten
-
-On no-MMU systems the application a5 register can be overwitten with the
-address of the process data segment when processing application signals.
-For flat format applications compiled with full absolute relocation this
-effectively corrupts the a5 register on signal processing - and this very
-quickly leads to process crash and often takes out the whole system with
-a panic as well.
-
-This has no effect on flat format applications compiled with the more
-common PIC methods (such as -msep-data). These format applications reserve
-a5 for the pointer to the data segment anyway - so it doesn't change it.
-
-A long time ago the a5 register was used in the code packed into the user
-stack to enable signal return processing. And so it had to be restored on
-end of signal cleanup processing back to the original a5 user value. This
-was historically done by saving away a5 in the sigcontext structure. At
-some point (a long time back it seems) the a5 restore process was changed
-and it was hard coded to put the user data segment address directly into a5.
-Which is ok for the common PIC compiled application case, but breaks the
-full relocation application code.
-
-We no longer use this type of signal handling mechanism and so we don't
-need to do anything special to save and restore a5 at all now. So remove the
-code that hard codes a5 to the address of the user data segment.
-
-Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
----
- arch/m68k/kernel/signal.c | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
-index 2dcee3a..9202f82 100644
---- a/arch/m68k/kernel/signal.c
-+++ b/arch/m68k/kernel/signal.c
-@@ -213,7 +213,6 @@ static inline int frame_extra_sizes(int f)
- 
- static inline void adjustformat(struct pt_regs *regs)
- {
--	((struct switch_stack *)regs - 1)->a5 = current->mm->start_data;
- 	/*
- 	 * set format byte to make stack appear modulo 4, which it will
- 	 * be when doing the rte
--- 
-1.9.1

board/qemu/mips64r6-malta/readme.txt

@@ -1,7 +1,10 @@
 Run the emulation with:
 
- qemu-system-mips64 -M malta -cpu MIPS64R6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+ qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 2.6.0
+Tested with QEMU 2.7.0
+
+Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
+since the naming was updated and the old name removed in 2.7.0

board/qemu/mips64r6el-malta/readme.txt

@@ -1,7 +1,10 @@
 Run the emulation with:
 
- qemu-system-mips64el -M malta -cpu MIPS64R6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
+ qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 
 Tested with QEMU 2.6.0
+
+Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic
+since the naming was updated and the old name removed in 2.7.0

board/qemu/x86/linux-4.7.config

@@ -1 +0,0 @@
-../x86_64/linux-4.7.config

board/qemu/x86/linux-4.8.config

@@ -0,0 +1 @@
+../x86_64/linux-4.8.config

configs/pc_x86_64_bios_defconfig

@@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

configs/pc_x86_64_efi_defconfig

@@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh"
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 

configs/qemu_aarch64_virt_defconfig

@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.8.config"

configs/qemu_arm_versatile_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.8.config"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb"

configs/qemu_arm_vexpress_defconfig

@@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_DEFCONFIG="vexpress"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9"

configs/qemu_m68k_mcf5208_defconfig

@@ -9,17 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_INITRAMFS=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-BR2_GLOBAL_PATCH_DIR="board/qemu/m68k-mcf5208/patches"
+# Linux headers same as kernel, a 4.8 series
-
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_m68k_q800_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_microblazebe_mmu_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.8.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch"

configs/qemu_microblazeel_mmu_defconfig

@@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.8.config"
 BR2_LINUX_KERNEL_LINUX_BIN=y
 BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch"

configs/qemu_mips32r2_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips32r2el_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips32r6_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_mips32r6el_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_mips64_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips64el_malta_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_mips64r6_malta_defconfig

@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_mips64r6el_malta_defconfig

@@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Compiler

configs/qemu_ppc64_pseries_defconfig

@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_DEFCONFIG="pseries"
 BR2_LINUX_KERNEL_VMLINUX=y

configs/qemu_ppc_g3beige_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_mpc8544ds_defconfig

@@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 
 # Serial port config

configs/qemu_ppc_virtex_ml507_defconfig

@@ -6,8 +6,8 @@ BR2_powerpc_440=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Use soft float
 BR2_SOFT_FLOAT=y
@@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.8.config"
 BR2_LINUX_KERNEL_VMLINUX=y
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507"

configs/qemu_sh4_r2d_defconfig

@@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.8.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sh4eb_r2d_defconfig

@@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.8.config"
 BR2_LINUX_KERNEL_ZIMAGE=y

configs/qemu_sparc64_sun4u_defconfig

@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.8.config"

configs/qemu_sparc_ss10_defconfig

@@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Linux kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.8.config"

configs/qemu_x86_64_defconfig

@@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config"

configs/qemu_x86_defconfig

@@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1"
 BR2_TARGET_ROOTFS_EXT2=y
 # BR2_TARGET_ROOTFS_TAR is not set
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.8.config"

configs/qemu_xtensa_lx60_defconfig

@@ -16,15 +16,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4,8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"

configs/qemu_xtensa_lx60_nommu_defconfig

@@ -20,15 +20,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_ROOTFS_INITRAMFS=y
 
-# Linux headers same as kernel, a 4.7 series
+# Linux headers same as kernel, a 4.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7-nommu.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8-nommu.config"
 BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y
 BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf"
 BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"