mirror of
https://github.com/motioneye-project/motioneyeos.git
synced 2025-04-19 12:57:16 +00:00
Remove Odroid C1, Odroid C2 an Pine 64 board support
This commit is contained in:
Calin Crisan
parent
ef176f27c7
commit
73beeb3ca2
@ -1,15 +0,0 @@
|
||||
diff -uNr alsa-lib-1.2.2-orig/include/sound/uapi/asound.h alsa-lib-1.2.2-patched/include/sound/uapi/asound.h
|
||||
--- alsa-lib-1.2.2-orig/include/sound/uapi/asound.h 2020-08-12 14:42:09.597313755 +0300
|
||||
+++ alsa-lib-1.2.2-patched/include/sound/uapi/asound.h 2020-08-12 14:43:15.576887697 +0300
|
||||
@@ -876,6 +876,11 @@
|
||||
#define SNDRV_TIMER_IOCTL_PAUSE _IO('T', 0xa3)
|
||||
#define SNDRV_TIMER_IOCTL_TREAD64 _IOW('T', 0xa4, int)
|
||||
|
||||
+#ifndef __kernel_long_t
|
||||
+typedef long __kernel_long_t;
|
||||
+typedef unsigned long __kernel_ulong_t;
|
||||
+#endif
|
||||
+
|
||||
#if __BITS_PER_LONG == 64
|
||||
#define SNDRV_TIMER_IOCTL_TREAD SNDRV_TIMER_IOCTL_TREAD_OLD
|
||||
#else
|
||||
Binary file not shown.
@ -1,63 +0,0 @@
|
||||
ODROIDC-UBOOT-CONFIG
|
||||
|
||||
# Possible screen resolutions
|
||||
# Uncomment only a single Line! The line with setenv written.
|
||||
# At least one mode must be selected.
|
||||
|
||||
# setenv m "vga" # 640x480
|
||||
# setenv m "480p" # 720x480
|
||||
# setenv m "576p" # 720x576
|
||||
# setenv m "800x480p60hz" # 800x480
|
||||
# setenv m "800x600p60hz" # 800x600
|
||||
# setenv m "1024x600p60hz" # 1024x600
|
||||
# setenv m "1024x768p60hz" # 1024x768
|
||||
# setenv m "1360x768p60hz" # 1360x768
|
||||
# setenv m "1366x768p60hz" # 1366x768
|
||||
# setenv m "1440x900p60hz" # 1440x900
|
||||
# setenv m "1600x900p60hz" # 1600x900
|
||||
# setenv m "1680x1050p60hz" # 1680x1050
|
||||
# setenv m "720p" # 720p 1280x720
|
||||
# setenv m "800p" # 1280x800
|
||||
# setenv m "1920x1200" # 1920x1200
|
||||
setenv m "1024x768p60hz" # 1080P 1920x1080
|
||||
|
||||
# HDMI DVI Mode Configuration
|
||||
setenv vout_mode "hdmi"
|
||||
# setenv vout_mode "dvi"
|
||||
|
||||
# HDMI BPP Mode
|
||||
setenv m_bpp "32"
|
||||
# setenv m_bpp "24"
|
||||
# setenv m_bpp "16"
|
||||
|
||||
# UHS Card Configuration
|
||||
# Uncomment the line below to __DISABLE__ UHS-1 MicroSD support
|
||||
# This might break boot for some brand models of cards.
|
||||
setenv disableuhs "disableuhs"
|
||||
|
||||
|
||||
# Disable VPU (Video decoding engine, Saves RAM!!!)
|
||||
# 0 = disabled
|
||||
# 1 = enabled
|
||||
setenv vpu "0"
|
||||
|
||||
# Disable HDMI Output (Again, saves ram!)
|
||||
# 0 = disabled
|
||||
# 1 = enabled
|
||||
setenv hdmioutput "0"
|
||||
|
||||
# Boot Arguments
|
||||
setenv bootargs "console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait ro no_console_suspend panic=10 quiet loglevel=1 vdaccfg=0xa000 logo=osd1,loaded,0x7900000,720p,full dmfc=3 cvbsmode=576cvbs hdmimode=${m} m_bpp=${m_bpp} vout=${vout_mode} ${disableuhs}"
|
||||
|
||||
# Booting
|
||||
fatload mmc 0:1 0x21000000 uImage
|
||||
fatload mmc 0:1 0x22000000 uInitrd
|
||||
fatload mmc 0:1 0x21800000 meson8b_odroidc.dtb
|
||||
fdt addr 21800000
|
||||
|
||||
if test "${vpu}" = "0"; then fdt rm /mesonstream; fdt rm /vdec; fdt rm /ppmgr; fi
|
||||
|
||||
if test "${hdmioutput}" = "0"; then fdt rm /mesonfb; fi
|
||||
|
||||
bootm 0x21000000 - 0x21800000
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
cp ${IMG_DIR}/rootfs.cpio.uboot ${BOARD_DIR}/uInitrd
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,16 +0,0 @@
|
||||
#!/bin/bash -e
|
||||
|
||||
BOARD_DIR=$(dirname $0)
|
||||
COMMON_DIR=${BOARD_DIR}/../common
|
||||
|
||||
export BOARD=$(basename ${BOARD_DIR})
|
||||
export IMG_DIR=${BOARD_DIR}/../../output/${BOARD}/images/
|
||||
export UBOOT_BIN=${IMG_DIR}/u-boot.bin
|
||||
export UBOOT_SEEK=64
|
||||
BL1=${IMG_DIR}/bl1.bin.hardkernel
|
||||
|
||||
source ${COMMON_DIR}/mkimage.sh
|
||||
|
||||
dd conv=notrunc if=${BL1} of=${DISK_IMG} bs=1 count=442
|
||||
dd conv=notrunc if=${BL1} of=${DISK_IMG} bs=512 skip=1 seek=1
|
||||
|
||||
@ -1,2 +0,0 @@
|
||||
OS_TTY_LOGIN="ttyS0"
|
||||
|
||||
@ -1,6 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
# we don't have the codepage kernel modules compiled in, so we have to manually insert them
|
||||
mkdir /system
|
||||
mount /dev/mmcblk0p2 /system
|
||||
/system/bin/busybox insmod /system/lib/modules/*/kernel/fs/nls/nls_cp437.ko
|
||||
@ -1,3 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
sed -i 's/00 0x22000000 0x/00 - 0x/' /boot/boot.ini
|
||||
@ -1 +0,0 @@
|
||||
odroidc1
|
||||
@ -1,5 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sn=$(cat /sys/class/net/eth0/address 2>/dev/null | tr -d ':')
|
||||
echo ${sn: -8}
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sed -i 's/00 - 0x/00 0x22000000 0x/' /boot/boot.ini
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
set -e
|
||||
|
||||
# boot directory
|
||||
mkdir -p ${BOOT_DIR}
|
||||
|
||||
cp ${IMG_DIR}/uImage ${BOOT_DIR}
|
||||
cp ${IMG_DIR}/meson8b_odroidc.dtb ${BOOT_DIR}
|
||||
cp ${BOARD_DIR}/bl1.bin.hardkernel ${IMG_DIR}
|
||||
cp ${BOARD_DIR}/u-boot.bin ${IMG_DIR}
|
||||
cp ${BOARD_DIR}/boot.ini ${BOOT_DIR}
|
||||
cp ${BOARD_DIR}/uInitrd ${BOOT_DIR}
|
||||
|
||||
# fix some lib dirs
|
||||
if ! [ -L ${TARGET}/lib/arm-linux-gnueabihf ]; then
|
||||
mv ${TARGET}/lib/arm-linux-gnueabihf/* ${TARGET}/lib
|
||||
rmdir ${TARGET}/lib/arm-linux-gnueabihf
|
||||
ln -s /lib ${TARGET}/lib/arm-linux-gnueabihf
|
||||
fi
|
||||
|
||||
if ! [ -L ${TARGET}/usr/lib/arm-linux-gnueabihf ]; then
|
||||
ln -s /usr/lib ${TARGET}/usr/lib/arm-linux-gnueabihf
|
||||
fi
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,140 +0,0 @@
|
||||
ODROIDC2-UBOOT-CONFIG
|
||||
|
||||
# Possible screen resolutions
|
||||
# Uncomment only a single Line! The line with setenv written.
|
||||
# At least one mode must be selected.
|
||||
|
||||
# 480 Lines (720x480)
|
||||
# setenv m "480i60hz" # Interlaced 60Hz
|
||||
# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
|
||||
# setenv m "480p60hz" # 480 Progressive 60Hz
|
||||
# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
|
||||
|
||||
# 576 Lines (720x576)
|
||||
# setenv m "576i50hz" # Interlaced 50Hz
|
||||
# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
|
||||
# setenv m "576p50hz" # Progressive 50Hz
|
||||
# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
|
||||
|
||||
# 720 Lines (1280x720)
|
||||
# setenv m "720p50hz" # 50Hz
|
||||
# setenv m "720p60hz" # 60Hz
|
||||
|
||||
# 1080 Lines (1920x1080)
|
||||
# setenv m "1080i60hz" # Interlaced 60Hz
|
||||
setenv m "1080p60hz" # Progressive 60Hz
|
||||
# setenv m "1080i50hz" # Interlaced 50Hz
|
||||
# setenv m "1080p50hz" # Progressive 50Hz
|
||||
# setenv m "1080p24hz" # Progressive 24Hz
|
||||
|
||||
# 4K (3840x2160)
|
||||
# setenv m "2160p30hz" # Progressive 30Hz
|
||||
# setenv m "2160p25hz" # Progressive 25Hz
|
||||
# setenv m "2160p24hz" # Progressive 24Hz
|
||||
# setenv m "smpte24hz" # Progressive 24Hz SMPTE
|
||||
# setenv m "2160p50hz" # Progressive 50Hz
|
||||
# setenv m "2160p60hz" # Progressive 60Hz
|
||||
# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
|
||||
# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
|
||||
|
||||
### VESA modes ###
|
||||
# setenv m "640x480p60hz"
|
||||
# setenv m "800x480p60hz"
|
||||
# setenv m "480x800p60hz"
|
||||
# setenv m "800x600p60hz"
|
||||
# setenv m "1024x600p60hz"
|
||||
# setenv m "1024x768p60hz"
|
||||
# setenv m "1280x800p60hz"
|
||||
# setenv m "1280x1024p60hz"
|
||||
# setenv m "1360x768p60hz"
|
||||
# setenv m "1440x900p60hz"
|
||||
# setenv m "1600x900p60hz"
|
||||
# setenv m "1680x1050p60hz"
|
||||
# setenv m "1600x1200p60hz"
|
||||
# setenv m "1920x1200p60hz"
|
||||
# setenv m "2560x1080p60hz"
|
||||
# setenv m "2560x1440p60hz"
|
||||
# setenv m "2560x1600p60hz"
|
||||
# setenv m "3440x1440p60hz"
|
||||
|
||||
# HDMI BPP Mode
|
||||
setenv m_bpp "32"
|
||||
# setenv m_bpp "24"
|
||||
# setenv m_bpp "16"
|
||||
|
||||
# HDMI DVI/VGA modes
|
||||
# By default its set to HDMI, if needed change below.
|
||||
# Uncomment only a single Line.
|
||||
setenv vout "dvi"
|
||||
# setenv vout "vga"
|
||||
|
||||
# HDMI HotPlug Detection control
|
||||
# Allows you to force HDMI thinking that the cable is connected.
|
||||
# true = HDMI will believe that cable is always connected
|
||||
# false = will let board/monitor negotiate the connection status
|
||||
setenv hpd "true"
|
||||
|
||||
# Meson Timer
|
||||
# 1 - Meson Timer
|
||||
# 0 - Arch Timer
|
||||
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
|
||||
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
|
||||
setenv mesontimer "1"
|
||||
|
||||
# UHS (Ultra High Speed) MicroSD mode enable/disable
|
||||
setenv disableuhs "false"
|
||||
|
||||
# MicroSD Card Detection enable/disable
|
||||
# Force the MMC controlled to believe that a card is connected.
|
||||
setenv mmc_removable "true"
|
||||
|
||||
# USB Multi WebCam tweak
|
||||
# Only enable this if you use it.
|
||||
setenv usbmulticam "false"
|
||||
|
||||
# CPU Frequency / Cores control
|
||||
###########################################
|
||||
### WARNING!!! WARNING!!! WARNING!!!
|
||||
# Before changing anything here please read the wiki entry:
|
||||
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
|
||||
#
|
||||
# MAX CPU's
|
||||
# setenv maxcpus "1"
|
||||
# setenv maxcpus "2"
|
||||
# setenv maxcpus "3"
|
||||
setenv maxcpus "4"
|
||||
|
||||
# MAX Frequency
|
||||
# setenv max_freq "2016" # 2.016GHz
|
||||
# setenv max_freq "1944" # 1.944GHz
|
||||
# setenv max_freq "1944" # 1.944GHz
|
||||
# setenv max_freq "1920" # 1.920GHz
|
||||
# setenv max_freq "1896" # 1.896GHz
|
||||
# setenv max_freq "1752" # 1.752GHz
|
||||
# setenv max_freq "1680" # 1.680GHz
|
||||
# setenv max_freq "1656" # 1.656GHz
|
||||
setenv max_freq "1536" # 1.536GHz
|
||||
|
||||
|
||||
|
||||
###########################################
|
||||
|
||||
# Boot Arguments
|
||||
setenv bootargs "console=ttyS0,115200n8 root=/dev/mmcblk0p2 rootwait ro no_console_suspend panic=10 quiet loglevel=1 net.ifnames=0 elevator=noop hdmimode=${m} m_bpp=${m_bpp} vout=${vout} disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
|
||||
|
||||
# Booting
|
||||
|
||||
fatload mmc 0:1 0x11000000 Image
|
||||
fatload mmc 0:1 0x13000000 uInitrd
|
||||
fatload mmc 0:1 0x10000000 meson64_odroidc2.dtb
|
||||
fdt addr 0x10000000
|
||||
|
||||
if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
|
||||
if test "${mesontimer}" = "1"; then fdt rm /timer; fi
|
||||
|
||||
if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
|
||||
if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
|
||||
if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
|
||||
if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
|
||||
|
||||
booti 0x11000000 - 0x10000000
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
cp ${IMG_DIR}/rootfs.cpio.uboot ${BOARD_DIR}/uInitrd
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,14 +0,0 @@
|
||||
#!/bin/bash -e
|
||||
|
||||
BOARD_DIR=$(dirname $0)
|
||||
COMMON_DIR=${BOARD_DIR}/../common
|
||||
|
||||
export BOARD=$(basename ${BOARD_DIR})
|
||||
export IMG_DIR=${BOARD_DIR}/../../output/${BOARD}/images/
|
||||
export UBOOT_BIN=${IMG_DIR}/u-boot.bin
|
||||
export UBOOT_SEEK=97
|
||||
|
||||
source ${COMMON_DIR}/mkimage.sh
|
||||
|
||||
dd conv=notrunc if=${UBOOT_BIN} of=${DISK_IMG} bs=1 count=442
|
||||
dd conv=notrunc if=${UBOOT_BIN} of=${DISK_IMG} bs=512 skip=1 seek=1
|
||||
@ -1,2 +0,0 @@
|
||||
OS_TTY_LOGIN="ttyS0"
|
||||
|
||||
@ -1,3 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
sed -i 's/00 0x13000000 0x/00 - 0x/' /boot/boot.ini
|
||||
@ -1 +0,0 @@
|
||||
odroidc2
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
ifconfig eth0 up
|
||||
|
||||
@ -1,5 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sn=$(cat /sys/class/net/eth0/address 2>/dev/null | tr -d ':')
|
||||
echo ${sn: -8}
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sed -i 's/00 - 0x/00 0x13000000 0x/' /boot/boot.ini
|
||||
|
||||
@ -1,14 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
set -e
|
||||
|
||||
# boot directory
|
||||
mkdir -p ${BOOT_DIR}
|
||||
|
||||
cp ${IMG_DIR}/Image ${BOOT_DIR}
|
||||
cp ${IMG_DIR}/meson64_odroidc2.dtb ${BOOT_DIR}
|
||||
cp ${BOARD_DIR}/bl1.bin.hardkernel ${IMG_DIR}
|
||||
cp ${BOARD_DIR}/u-boot.bin ${IMG_DIR}
|
||||
cp ${BOARD_DIR}/boot.ini ${BOOT_DIR}
|
||||
cp ${BOARD_DIR}/uInitrd ${BOOT_DIR}
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
cp ${IMG_DIR}/rootfs.cpio.uboot ${BOARD_DIR}/uInitrd
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
@ -1,33 +0,0 @@
|
||||
diff -uNr linux-pine64-orig/drivers/media/platform/sunxi-vfe/vfe.c linux-pine64-vfe-fix/drivers/media/platform/sunxi-vfe/vfe.c
|
||||
--- linux-pine64-orig/drivers/media/platform/sunxi-vfe/vfe.c 2017-07-09 19:19:29.738112486 +0300
|
||||
+++ linux-pine64-vfe-fix/drivers/media/platform/sunxi-vfe/vfe.c 2017-07-09 19:22:05.466235166 +0300
|
||||
@@ -1348,17 +1348,17 @@
|
||||
bsp_csi_int_disable(dev->vip_sel, dev->cur_ch,CSI_INT_FRAME_DONE);
|
||||
if (dev->first_flag == 0) {
|
||||
dev->first_flag++;
|
||||
- vfe_print("capture video mode!\n");
|
||||
+ //vfe_print("capture video mode!\n");
|
||||
goto set_isp_stat_addr;
|
||||
}
|
||||
if (dev->first_flag == 1) {
|
||||
dev->first_flag++;
|
||||
- vfe_print("capture video first frame done!\n");
|
||||
+ //vfe_print("capture video first frame done!\n");
|
||||
}
|
||||
|
||||
//video buffer handle:
|
||||
if ((&dma_q->active) == dma_q->active.next->next->next) {
|
||||
- vfe_warn("Only two buffer left for csi\n");
|
||||
+ //vfe_warn("Only two buffer left for csi\n");
|
||||
dev->first_flag=0;
|
||||
goto unlock;
|
||||
}
|
||||
@@ -1366,7 +1366,7 @@
|
||||
|
||||
/* Nobody is waiting on this buffer*/
|
||||
if (!waitqueue_active(&buf->vb.vb2_queue->done_wq)) {
|
||||
- vfe_warn(" Nobody is waiting on this video buffer,buf = 0x%p\n",buf);
|
||||
+ //vfe_warn(" Nobody is waiting on this video buffer,buf = 0x%p\n",buf);
|
||||
}
|
||||
list_del(&buf->list);
|
||||
v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
|
||||
@ -1,16 +0,0 @@
|
||||
#!/bin/bash -e
|
||||
|
||||
BOARD_DIR=$(dirname $0)
|
||||
COMMON_DIR=${BOARD_DIR}/../common
|
||||
|
||||
export BOARD=$(basename ${BOARD_DIR})
|
||||
export IMG_DIR=${BOARD_DIR}/../../output/${BOARD}/images/
|
||||
export UBOOT_BIN=${BOARD_DIR}/u-boot-with-dtb.bin
|
||||
export UBOOT_SEEK=38192
|
||||
export BOOT_START=20
|
||||
BOOT0=${BOARD_DIR}/boot0.bin
|
||||
|
||||
source ${COMMON_DIR}/mkimage.sh
|
||||
|
||||
dd conv=notrunc if=${BOOT0} of=${DISK_IMG} bs=1k seek=8 count=32 oflag=direct
|
||||
|
||||
@ -1,3 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
sed -i 's/initrd_filename=/#initrd_filename=/' /boot/uEnv.txt
|
||||
@ -1 +0,0 @@
|
||||
pine64
|
||||
@ -1,5 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sn=$(cat /sys/class/net/eth0/address 2>/dev/null | tr -d ':')
|
||||
echo ${sn: -8}
|
||||
|
||||
@ -1,5 +0,0 @@
|
||||
8723bs
|
||||
8723cs
|
||||
8723bs_vq0
|
||||
hci_uart
|
||||
|
||||
@ -1,4 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
sed -r -i 's/#initrd_filename=.*/initrd_filename=fwupdater.img/' /boot/uEnv.txt
|
||||
|
||||
@ -1,12 +0,0 @@
|
||||
#!/bin/sh
|
||||
|
||||
set -e
|
||||
|
||||
# boot directory
|
||||
mkdir -p ${BOOT_DIR}/pine64
|
||||
|
||||
cp ${IMG_DIR}/Image ${BOOT_DIR}/kernel.img
|
||||
cp ${BOARD_DIR}/uEnv.txt ${BOOT_DIR}
|
||||
cp ${BOARD_DIR}/dtb/* ${BOOT_DIR}/pine64
|
||||
cp ${BOARD_DIR}/fwupdater.img ${BOOT_DIR}
|
||||
|
||||
Binary file not shown.
@ -1,63 +0,0 @@
|
||||
console=tty1
|
||||
selinux=permissive
|
||||
enforcing=0
|
||||
optargs=no_console_suspend panic=10 quiet loglevel=1
|
||||
kernel_filename=kernel.img
|
||||
#initrd_filename=ramdisk.img
|
||||
#recovery_initrd_filename=ramdisk-recovery.img
|
||||
hardware=sun50iw1p1
|
||||
|
||||
# INFO:
|
||||
# To enable one of below options,
|
||||
# uncomment them by removing # in front of name
|
||||
|
||||
# To use android recovery:
|
||||
# Create empty file recovery.txt in root of this partition
|
||||
|
||||
# To enable LCD or HDMI, if not changed it will use default (experimental)
|
||||
disp_screen0=hdmi
|
||||
# disp_screen1=lcd or hdmi
|
||||
# disp_mode=screen0 or screen1 or dualhead or xinerama or clone
|
||||
|
||||
# USB OTG port mode (experimental)
|
||||
# otg_mode=device or host or otg
|
||||
otg_mode=host
|
||||
|
||||
# Configure contiguous memory allocation
|
||||
# This maybe required to be enlarged for 4K displays
|
||||
cma=384M
|
||||
|
||||
# To change HDMI display mode:
|
||||
# hdmi_mode=480i
|
||||
# hdmi_mode=576i
|
||||
# hdmi_mode=480p
|
||||
# hdmi_mode=576p
|
||||
# hdmi_mode=720p50
|
||||
hdmi_mode=720p60
|
||||
# hdmi_mode=1080i50
|
||||
# hdmi_mode=1080i60
|
||||
# hdmi_mode=1080p24
|
||||
# hdmi_mode=1080p50
|
||||
# hdmi_mode=1080p60
|
||||
# hdmi_mode=2160p30
|
||||
# hdmi_mode=2160p25
|
||||
# hdmi_mode=2160p24
|
||||
|
||||
# To enable DVI compatibilty:
|
||||
disp_dvi_compat=on
|
||||
|
||||
# To enable CSI camera, if not enabled it will use default:
|
||||
# camera_type=s5k4ec
|
||||
# camera_type=ov5640
|
||||
|
||||
# Configure ethernet speed
|
||||
eth0_speed=auto
|
||||
# eth0_speed=1000
|
||||
# eth0_speed=100
|
||||
# eth0_speed=10
|
||||
|
||||
# Disable HDMI CEC
|
||||
hdmi_cec=0
|
||||
|
||||
# Enable experimental HDMI CEC driver
|
||||
# hdmi_cec=2
|
||||
Binary file not shown.
@ -1,89 +0,0 @@
|
||||
BR2_arm=y
|
||||
BR2_cortex_a5=y
|
||||
BR2_ARM_ENABLE_NEON=y
|
||||
BR2_ARM_ENABLE_VFP=y
|
||||
BR2_ARM_FPU_NEON_VFPV4=y
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="$(TOPDIR)/.buildroot-ccache-odroidc1"
|
||||
BR2_OPTIMIZE_2=y
|
||||
BR2_GLOBAL_PATCH_DIR="board/odroidc1"
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_URL="https://releases.linaro.org/archive/14.09/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz"
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="$(ARCH)-linux-gnueabihf"
|
||||
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_1=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CXX=y
|
||||
BR2_TARGET_OPTIMIZATION="-pipe"
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
||||
BR2_TARGET_TZ_INFO=y
|
||||
BR2_ROOTFS_OVERLAY="board/common/overlay board/odroidc1/overlay"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/common/postscript.sh"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/hardkernel/linux/archive/e2f1dc9deac5041ccbfdc7e1058d82d2ad3eb091.tar.gz"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="odroidc"
|
||||
BR2_LINUX_KERNEL_UIMAGE=y
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="meson8b_odroidc"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="board/common/busybox.config"
|
||||
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
|
||||
BR2_PACKAGE_ALSA_UTILS=y
|
||||
BR2_PACKAGE_ALSA_UTILS_APLAY=y
|
||||
BR2_PACKAGE_GZIP=y
|
||||
BR2_PACKAGE_JQ=y
|
||||
BR2_PACKAGE_E2FSPROGS=y
|
||||
BR2_PACKAGE_NTFS_3G=y
|
||||
BR2_PACKAGE_B43_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_USB8797=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_USB8897=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT61=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
|
||||
BR2_PACKAGE_RNG_TOOLS=y
|
||||
BR2_PACKAGE_USB_MODESWITCH_DATA=y
|
||||
BR2_PACKAGE_CA_CERTIFICATES=y
|
||||
BR2_PACKAGE_LIBSSH2=y
|
||||
BR2_PACKAGE_LIBFUSE=y
|
||||
BR2_PACKAGE_LIBCURL=y
|
||||
BR2_PACKAGE_LIBCURL_CURL=y
|
||||
BR2_PACKAGE_LIBCAP=y
|
||||
BR2_PACKAGE_PCRE=y
|
||||
BR2_PACKAGE_SEMVER_SORT=y
|
||||
BR2_PACKAGE_AUTOSSH=y
|
||||
BR2_PACKAGE_CRDA=y
|
||||
BR2_PACKAGE_DHCP=y
|
||||
BR2_PACKAGE_DHCP_CLIENT=y
|
||||
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
|
||||
BR2_PACKAGE_IPTABLES=y
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_NET_TOOLS=y
|
||||
BR2_PACKAGE_NETCAT=y
|
||||
BR2_PACKAGE_NTP=y
|
||||
BR2_PACKAGE_NTP_SNTP=y
|
||||
BR2_PACKAGE_OPENSSH=y
|
||||
BR2_PACKAGE_PPPD=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
||||
BR2_PACKAGE_BASH=y
|
||||
BR2_PACKAGE_LOGROTATE=y
|
||||
BR2_PACKAGE_TAR=y
|
||||
BR2_PACKAGE_UTIL_LINUX_BINARIES=y
|
||||
BR2_PACKAGE_UTIL_LINUX_PARTX=y
|
||||
BR2_PACKAGE_NANO=y
|
||||
@ -1,25 +0,0 @@
|
||||
BR2_arm=y
|
||||
BR2_cortex_a5=y
|
||||
BR2_ARM_ENABLE_NEON=y
|
||||
BR2_ARM_ENABLE_VFP=y
|
||||
BR2_ARM_FPU_NEON_VFPV4=y
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="$(TOPDIR)/.buildroot-ccache-odroidc1-initramfs"
|
||||
BR2_OPTIMIZE_2=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_URL="https://releases.linaro.org/archive/14.09/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz"
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="$(ARCH)-linux-gnueabihf"
|
||||
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_1=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_CXX=y
|
||||
BR2_TARGET_OPTIMIZATION="-pipe"
|
||||
BR2_ROOTFS_OVERLAY="board/common/overlay-initramfs board/odroidc1/overlay-initramfs"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="board/common/busybox_initramfs.config"
|
||||
BR2_PACKAGE_UTIL_LINUX=y
|
||||
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
|
||||
BR2_TARGET_ROOTFS_CPIO=y
|
||||
BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
@ -1,76 +0,0 @@
|
||||
BR2_aarch64=y
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="$(TOPDIR)/.buildroot-ccache-odroidc2"
|
||||
BR2_OPTIMIZE_2=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TARGET_OPTIMIZATION="-pipe"
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
||||
BR2_TARGET_TZ_INFO=y
|
||||
BR2_ROOTFS_OVERLAY="board/common/overlay board/odroidc2/overlay"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/common/postscript.sh"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/hardkernel/linux/archive/64c8062a2c3d89d514f92299528e771b5acf726b.tar.gz"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="odroidc2"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="meson64_odroidc2"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="board/common/busybox.config"
|
||||
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
|
||||
BR2_PACKAGE_ALSA_UTILS=y
|
||||
BR2_PACKAGE_ALSA_UTILS_APLAY=y
|
||||
BR2_PACKAGE_GZIP=y
|
||||
BR2_PACKAGE_JQ=y
|
||||
BR2_PACKAGE_E2FSPROGS=y
|
||||
BR2_PACKAGE_NTFS_3G=y
|
||||
BR2_PACKAGE_B43_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_USB8797=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_USB8897=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT61=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
|
||||
BR2_PACKAGE_RNG_TOOLS=y
|
||||
BR2_PACKAGE_USB_MODESWITCH_DATA=y
|
||||
BR2_PACKAGE_CA_CERTIFICATES=y
|
||||
BR2_PACKAGE_LIBSSH2=y
|
||||
BR2_PACKAGE_LIBFUSE=y
|
||||
BR2_PACKAGE_LIBCURL=y
|
||||
BR2_PACKAGE_LIBCURL_CURL=y
|
||||
BR2_PACKAGE_LIBCAP=y
|
||||
BR2_PACKAGE_PCRE=y
|
||||
BR2_PACKAGE_PCRE_UCP=y
|
||||
BR2_PACKAGE_SEMVER_SORT=y
|
||||
BR2_PACKAGE_AUTOSSH=y
|
||||
BR2_PACKAGE_CRDA=y
|
||||
BR2_PACKAGE_DHCP=y
|
||||
BR2_PACKAGE_DHCP_CLIENT=y
|
||||
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
|
||||
BR2_PACKAGE_IPTABLES=y
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_NET_TOOLS=y
|
||||
BR2_PACKAGE_NETCAT=y
|
||||
BR2_PACKAGE_NTP=y
|
||||
BR2_PACKAGE_NTP_SNTP=y
|
||||
BR2_PACKAGE_OPENSSH=y
|
||||
BR2_PACKAGE_PPPD=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
||||
BR2_PACKAGE_BASH=y
|
||||
BR2_PACKAGE_LOGROTATE=y
|
||||
BR2_PACKAGE_TAR=y
|
||||
BR2_PACKAGE_UTIL_LINUX_BINARIES=y
|
||||
BR2_PACKAGE_UTIL_LINUX_PARTX=y
|
||||
BR2_PACKAGE_NANO=y
|
||||
@ -1,13 +0,0 @@
|
||||
BR2_aarch64=y
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="$(TOPDIR)/.buildroot-ccache-odroidc2-initramfs"
|
||||
BR2_OPTIMIZE_2=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TARGET_OPTIMIZATION="-pipe"
|
||||
BR2_ROOTFS_OVERLAY="board/common/overlay-initramfs board/odroidc2/overlay-initramfs"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="board/common/busybox_initramfs.config"
|
||||
BR2_PACKAGE_UTIL_LINUX=y
|
||||
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
|
||||
BR2_TARGET_ROOTFS_CPIO=y
|
||||
BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
@ -1,75 +0,0 @@
|
||||
BR2_aarch64=y
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="$(TOPDIR)/.buildroot-ccache-pine64"
|
||||
BR2_OPTIMIZE_2=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TARGET_OPTIMIZATION="-pipe"
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
||||
BR2_TARGET_TZ_INFO=y
|
||||
BR2_ROOTFS_OVERLAY="board/common/overlay board/pine64/overlay"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="board/common/postscript.sh"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/longsleep/linux-pine64/archive/5ea364f6dbe35934868010f07f6abbc0a2d76120.tar.gz"
|
||||
BR2_LINUX_KERNEL_PATCH="board/pine64/linux-vfe-dmesg-flood-fix.patch"
|
||||
BR2_LINUX_KERNEL_DEFCONFIG="sun50iw1p1smp_linux"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="board/common/busybox.config"
|
||||
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
|
||||
BR2_PACKAGE_ALSA_UTILS=y
|
||||
BR2_PACKAGE_ALSA_UTILS_APLAY=y
|
||||
BR2_PACKAGE_GZIP=y
|
||||
BR2_PACKAGE_JQ=y
|
||||
BR2_PACKAGE_E2FSPROGS=y
|
||||
BR2_PACKAGE_NTFS_3G=y
|
||||
BR2_PACKAGE_B43_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_7010=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_USB8797=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MWIFIEX_USB8897=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7601U=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT61=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
|
||||
BR2_PACKAGE_RNG_TOOLS=y
|
||||
BR2_PACKAGE_USB_MODESWITCH_DATA=y
|
||||
BR2_PACKAGE_CA_CERTIFICATES=y
|
||||
BR2_PACKAGE_LIBSSH2=y
|
||||
BR2_PACKAGE_LIBFUSE=y
|
||||
BR2_PACKAGE_LIBCURL=y
|
||||
BR2_PACKAGE_LIBCURL_CURL=y
|
||||
BR2_PACKAGE_LIBCAP=y
|
||||
BR2_PACKAGE_PCRE=y
|
||||
BR2_PACKAGE_PCRE_UCP=y
|
||||
BR2_PACKAGE_SEMVER_SORT=y
|
||||
BR2_PACKAGE_AUTOSSH=y
|
||||
BR2_PACKAGE_CRDA=y
|
||||
BR2_PACKAGE_DHCP=y
|
||||
BR2_PACKAGE_DHCP_CLIENT=y
|
||||
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
|
||||
BR2_PACKAGE_IPTABLES=y
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_NET_TOOLS=y
|
||||
BR2_PACKAGE_NETCAT=y
|
||||
BR2_PACKAGE_NTP=y
|
||||
BR2_PACKAGE_NTP_SNTP=y
|
||||
BR2_PACKAGE_OPENSSH=y
|
||||
BR2_PACKAGE_PPPD=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
|
||||
BR2_PACKAGE_BASH=y
|
||||
BR2_PACKAGE_LOGROTATE=y
|
||||
BR2_PACKAGE_TAR=y
|
||||
BR2_PACKAGE_UTIL_LINUX_BINARIES=y
|
||||
BR2_PACKAGE_UTIL_LINUX_PARTX=y
|
||||
BR2_PACKAGE_NANO=y
|
||||
@ -1,13 +0,0 @@
|
||||
BR2_aarch64=y
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="$(TOPDIR)/.buildroot-ccache-pine64-initramfs"
|
||||
BR2_OPTIMIZE_2=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TARGET_OPTIMIZATION="-pipe"
|
||||
BR2_ROOTFS_OVERLAY="board/common/overlay-initramfs board/pine64/overlay-initramfs"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="board/common/busybox_initramfs.config"
|
||||
BR2_PACKAGE_UTIL_LINUX=y
|
||||
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
|
||||
BR2_TARGET_ROOTFS_CPIO=y
|
||||
BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
Loading…
x
Reference in New Issue
Block a user