updated motioneye; raspberrypi3: added required wifi firmware

board/common/overlay/etc/version

@@ -1,4 +1,4 @@
 os_name="motionEyeOS"
 os_short_name="motioneyeos"
 os_prefix="meye"
-os_version="20160221"
+os_version="20160305"

board/raspberrypi3/overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt

@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80

package/motioneye/motioneye.mk

@@ -4,7 +4,7 @@
 #
 #############################################################
 
-MOTIONEYE_VERSION = 9029a21ea766af5f98b2eeca72675656f2d380a9
+MOTIONEYE_VERSION = 5310d431c80eb1890862cd5ce83b2c2ddfd4cf87
 MOTIONEYE_SITE = $(call github,ccrisan,motioneye,$(MOTIONEYE_VERSION))
 MOTIONEYE_SOURCE = $(MOTIONEYE_VERSION).tar.gz
 MOTIONEYE_LICENSE = GPLv3