diff --git a/board/gnublin/README b/board/gnublin/README
deleted file mode 100644
index 8f6a9f01ea..0000000000
--- a/board/gnublin/README
+++ /dev/null
@@ -1,48 +0,0 @@
-This the Buildroot support for the LPC3131 based Gnublin board (see here:
-http://en.gnublin.org/) and to the Elektor Linux board
-(http://www.elektor.com/news/elektor-presents-embedded-linux-made-easy.2147294.
-lynkx)
-
-Unfortunately currently the AD and the pwm modules are not supported, i'm about
-to add also those drivers as well to the current kernel later.
-
-Base kernel version: 3.7 (available here:
-https://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin/commits/gnublin-
-support)
-
-U-boot version: 2009.11 (available here:
-https://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support)
-
-
-Steps to create a bootable SD card (with the given config you need an at least
-500 MB SD card):
-
-1.Config buildroot with the gnublin_defconfig:
-
-$ make gnublin_defconfig
-
-2.Tweak the config for your needs:
-
-$ make menuconfig
-
-3.Build:
-
-$ make
-
-4.Create two partitions on your SD card, one with type of BootIt (fdisk ID: df),
-the size should be around 1M, and another partition with all of the left space
-on the card, and with the type of normal DOS partition.
-
-5.From the output/images directory dump the u-boot image to the BootIt partition
-(probably you have to modify the output /dev files according to your system):
-
-$ dd if=output/images/u-boot.bin of=/dev/sdc1
-
-6.Dump the root fs image as well:
-
-$ dd if=output/images/rootfs.ext2 of=/dev/sdc2
-
-7.Insert the SD card into the board's slot, and your board should boot up with
-your newly created system.
-
-Any feedback/report is welcome on the mr.zoltan.gyarmati[at]gmail.com
diff --git a/configs/gnublin_defconfig b/configs/gnublin_defconfig
deleted file mode 100644
index 369c9da62c..0000000000
--- a/configs/gnublin_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm926t=y
-
-# System
-BR2_KERNEL_HEADERS_VERSION=y
-BR2_DEFAULT_KERNEL_VERSION="3.7"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_7=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Gnublin"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_BLOCKS=475000
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="GNUBLIN"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://gitorious.org/u-boot-gnublin-support/u-boot-gnublin-support.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="2009.11_gnublin_support_v2"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://gitorious.org/linux-3-7-gnublin/linux-3-7-gnublin.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="v3.7-gnublin-2"
-BR2_LINUX_KERNEL_DEFCONFIG="gnublin"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y