As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64_efi reference defconfig is targeted towards an EFI
environment but the kernel which comes with it does not enable EFI
support by default.
Booting this defconfig without kernel EFI support on a qemu virtual
machine with EFI firmware resulted in no output to tty1 or ttyS0.
Enabling EFI support in the kernel fixed this and seems saner for an EFI
reference Buildroot defconfig.
Adding CONFIG_EFI to board/pc/linux-extras.config also affects
pc_x86_64_bios_defconfig which doesn't require it, however it was
observed that the extra overhead is small and so this is preferred
rather than having a separate config file.
This was tested with qemu 2.6.0 running with kvm enabled and firmware
EFI v2.60 by EDK II. Also built and verified bios defconfig on the same
setup but with BIOS firmware instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The instructions listed sdcard.img as output image name but
board/pc/genimage-*.cfg generate it named as disk.img instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Redirect the console output to the screen and not only to the serial
port.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imx6ul has currently an issue on kernel 4.7 that causes a stall when running
the "reboot" command.
This issue has been reported in the linux-arm-kernel mailing list, but we
don't have a proper fix at the moment.
This problem is not seen when SMP is disabled, so let's disable it for now
until a proper fix becomes available.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.
The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the wireless packages be selected by default to make the
usage of Wifi a bit simpler.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need for the 'exit' statement in the post-image scripts,
so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide a more complete set of instructions on how to get Wifi
working on the warpboard.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The readme.txt for the three boards are almost the same, so merge
them into board/zynq/readme.txt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. It includes proper ps7_init_gpl.c/h
in it, so builds working SPL without any manual intervention.
BR2_TARGET_UBOOT_BOARD_NAME should be changed to zynq_zc706 since
U-Boot now has separate defconfig files for ZC702 and ZC706 boards.
BR2_TARGET_UBOOT_SPL_NAME should be changed to spl/boot.bin since
the Zynq image support for the mkimage tool was upstreamed and it
now generates boot.bin under spl/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. To sync with the Zedboard updates,
switch over to the Xilinx GitHub repository.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline.
Commit 46d6a561be41 ("zedboard: Generate BOOT.BIN automatically")
switched from the Xilinx GitHub repository to the U-Boot mainline,
but this commit gets it back to the Xilinx GitHub repository for the
following reasons:
- This defconfig still relies on the Xilinx's local repository for
the kernel. The vendor does the best test for the combination of
U-Boot and the kernel with the same release tag (xilinx-v2016.2
in this case).
- At the time of commit 46d6a561be41, the u-boot-xlnx still needed
manual copy of ps7_init(_gpl).c/h in order to build a working SPL
image. So, the mainline U-Boot had advantage in that point of
time. However, the improvement in the mainline U-Boot was merged
into the u-boot-xlnx at the xilinx-v2015.3 release. Now, the
mainline and the u-boot-xlnx are even in this point of view.
- The mainline U-Boot defaults to boot FIT, so something must be
done; either patch environments around with a local patch to
switch to uImage booting (current solution), or build an FIT
with a post build script (chromebook snow does this). On the
other hand, the Xilinx repository defaults to uImage booting,
so it is straightforward, and needs no addition care.
This commit does:
- Switch to the Xilinx custom git repository, and stick to the
xilinx-v2016.2 tag.
- Delete the local patch board/avnet/zedboard/uboot/0001...
since the Xilinx custom repository can boot uImage by default.
- Enable BR2_TARGET_UBOOT_FORMAT_IMG instead of ..._FORMAT_DTB_IMG
since all the Zynq boards in U-Boot enable CONFIG_OF_EMBED.
- Replace BR2_TARGET_UBOOT_ZYNQ_IMAGE with BR2_TARGET_UBOOT_SPL_NAME
since U-Boot can natively generate the Zynq boot image now. The
Zynq image support for mkimage tool was upstreamed at v2016.01
(so xilinx-v2016.1 as well), so no additional tool is needed
any more.
- Update readme.txt
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selecting the driver CONFIG_BRCMFMAC as built-in causes some probe issues
as we cannot guarantee that the brcmfmac driver will be probed after the
rootfs has been mounted. The brcmfmac driver retrieves the firmware and
nvram file from the rootfs, so the rootfs should be mounted first.
To avoid such issues let the CONFIG_BRCMFMAC be built as module, which is
the original option in imx_v6_v7_defconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.7 2.6.0 YES OK (3)
arm_versatile 4.7 2.5.0 YES OK
arm_vexpress 4.7 2.5.0 YES OK
m68k_mcf5208 4.7 2.5.0 YES OK
m68k_q800 4.7 q800-v2.4.0 NO (2) OK
microblazebe 4.7 2.5.0 YES OK
microblazeel 4.7 2.5.0 YES OK
mips32r2el_malta 4.7 2.5.0 YES OK
mips32r2_malta 4.7 2.5.0 YES OK
mips32r6el_malta 4.7 2.6.0 YES OK (3)
mips32r6_malta 4.7 2.6.0 YES OK (3)
mips64el_malta 4.7 2.5.0 YES OK
mips64_malta 4.7 2.5.0 YES OK
mips64r6el_malta 4.7 2.6.0 YES OK (3)
mips64r6_malta 4.7 2.6.0 YES OK (3)
ppc_g3beige 4.7 2.5.0 YES OK
ppc_mpc8544ds 4.7 2.5.0 YES OK
ppc_virtex_ml507 4.7 2.5.0 NO OK
ppc64_pseries 4.7 2.5.0 YES OK
sh4 4.7 2.5.0 YES OK
sh4eb 4.7 2.5.0 NO (1) OK
sparc_ss10 4.7 2.5.0 YES OK
sparc64_sun4u 4.7 2.5.0 YES OK
sparc_sun4u 4.7 2.5.0 YES OK
x86 4.7 2.5.0 YES OK
x86_64 4.7 2.5.0 YES OK
xtensa_lx60 4.7 2.6.0 YES OK
xtensa_lx60_nommu 4.7 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently warpboard uses a 4.0.5 kernel version from github.
Move to version 4.4.15, which is a long term supported kernel version.
With 4.4.15 we no longer need the extra two kernel patches as they have
already been upstreamed.
Use a linux fragment file, so that wireless can be functional by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generate an sdcard.img image to make it easier the deployment of a
Buildroot image.
[Peter: drop unneeded exit statement in post-image script]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for Technexion's i.MX6UL Pico board running U-boot 2016.07
and kernel 4.7.
For information about this board, please visit:
http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdf
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #9091, the U-Boot environment we provide for the
Microzed and Zedboard platforms loads the ramdisk at 0x2000000 and the
DT at 0x3000000. This means that a large enough ramdisk overwrites the
DT. It makes more sense to load the DT at 0x2000000 and the ramdisk at
0x3000000.
Reported-by: Michael Monaghan <michaellmonaghan@gmail.com>
Tested-by: Michael Monaghan <michaellmonaghan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- fix disablehpd bug (thanks to Thomas for spotting it.)
- change default HDMI mode to 1080p60hz.
- add support for HDMI HotPlug Detection control.
- add support for mason timer.
- add support for headless boot
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-4800 is supported by mainline Linux as of 4.5 and by U-boot
as of v2016-07.
The package requires the custom ts4800-mbrboot routine.
A post-image script is provided to generate an image that can be
directly written to an SD card.
More details on the board here:
http://wiki.embeddedarm.com/wiki/TS-4800
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we've merged nodm, the autologin display manager, we can
get rid of xinit, and startx hack and use nodm to start X on boot.
While here, let's start xterm and glmark2, just as demos.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No significant changes but 4.6.3 moved parts of the device tree
into a different file, so dts patch must be updated.
[Peter: explicitly configure kernel headers for 4.6]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Chromebook Snow (Samsung XE303C12) is an Exynos 5 board with
a keyboard, an 11 inch screen and a battery attached.
It is relatively developer-friendly and can run mainline Linux
kernels with little to no effort.
There is barely anything special about this target as far as toolchain
is concerned, but its bootloader only accepts signed kernel images
in a Chromium OS specific format, and is not controllable otherwise.
This config provides a script for building the proper kernel blobs,
and a short manual for booting Buildroot images on this device.
In-tree exynos_defconfig is used for the kernel, with a fragment
to change mwifiex into a module. When built statically, mwifiex
attempts to load its firmware before rootfs is mounted and fails.
[Peter: use BR2_KERNEL_HEADERS_AS_KERNEL=y, lock kernel version,
enable fit support in u-boot mkimage]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
