Set default gpios for Lanbon L8-HS

src/sys/gpio/hasp_gpio.cpp

@@ -38,6 +38,14 @@ ButtonConfig switchConfig; // Clicks only
 // An array of button pins, led pins, and the led states. Cannot be const
 // because ledState is mutable.
 hasp_gpio_config_t gpioConfig[HASP_NUM_GPIO_CONFIG] = {
+#if defined(LANBONL8_HS)
+    {.pin = RELAY_1, .group = 1, .gpio_function = OUTPUT, .type = LIGHT_RELAY},
+    {.pin = RELAY_2, .group = 2, .gpio_function = OUTPUT, .type = LIGHT_RELAY},
+    {.pin = LED_RED, .group = 4, .gpio_function = OUTPUT, .type = LED_R},
+    {.pin = RELAY_3, .group = 3, .gpio_function = OUTPUT, .type = LIGHT_RELAY},
+    {.pin = LED_GREEN, .group = 5, .gpio_function = OUTPUT, .type = LED_G},
+    {.pin = LED_BLUE, .group = 6, .gpio_function = OUTPUT, .type = LED_B}
+#endif
     //    {2, 8, INPUT, LOW}, {3, 9, OUTPUT, LOW}, {4, 10, INPUT, HIGH}, {5, 11, OUTPUT, LOW}, {6, 12, INPUT, LOW},
 };
 uint8_t pwm_channel = 1; // Backlight has 0

src/sys/gpio/hasp_gpio.h

@@ -16,10 +16,10 @@ struct hasp_gpio_config_t
     uint8_t pin : 8;           // pin number
     uint8_t group : 8;         // groupid
     uint8_t gpio_function : 7; // INPUT, OUTPUT, PULLUP, etc
+    uint8_t type; // switch, button, ...
     uint8_t inverted : 1;
     uint8_t channel : 4; // pwmchannel
     uint8_t power : 1;
-    uint8_t type; // switch, button, ...
     uint16_t val;
     uint16_t max;
 #ifdef ARDUINO

user_setups/esp32/lanbon_l8.ini

@@ -16,10 +16,9 @@ build_flags =
 
 ;region -- TFT_eSPI build options ------------------------
     -D LANBONL8
-    ; -D USER_SETUP_LOADED=1
+    -D LANBONL8_HS             ; default GPIO settings
     -D LGFX_USE_V1=1
     -D ST7789_DRIVER=1
-    ;-D CGRAM_OFFSET=1         ; Library will add offsets required
     -D TFT_SDA_READ            ; Read from display, it only provides an SDA pin
     -D TFT_WIDTH=240
     -D TFT_HEIGHT=320
@@ -48,15 +47,13 @@ build_flags =
     -D LED_GREEN=32
     -D LED_BLUE=33
     -D RELAY_1=12
-    -D RELAY_2=24
-    -D RELAY_3=37
+    -D RELAY_2=14
+    -D RELAY_3=27
 ;endregion
 
 lib_deps =
     ${arduino_esp32_v2.lib_deps}
     ${lovyangfx.lib_deps}
-    ;${tft_espi.lib_deps}
     ; FT6336U is 6x faster then FocalTech Library
     ;git+https://github.com/lewisxhe/FocalTech_Library.git
     ${ft6336.lib_deps}
-