diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
index a3999b15..ec57bec6 100644
--- a/.github/workflows/build.yaml
+++ b/.github/workflows/build.yaml
@@ -35,7 +35,7 @@ jobs:
           - out: dustinwatts
             env: "freetouchdeck_4MB -e freetouchdeck_8MB -e esp32-touchdown"
           - out: elecrow
-            env: "esp-terminal-rgb_16MB -e esp-terminal-spi_16MB"
+            env: "esp32-terminal-rgb_16MB -e esp32-terminal-spi_16MB"
           - out: globalsecurity
             env: gs-t3e_16MB
           - out: lanbon
diff --git a/user_setups/esp32s3/esp-terminal.ini b/user_setups/esp32s3/esp-terminal.ini
deleted file mode 100644
index e6615021..00000000
--- a/user_setups/esp32s3/esp-terminal.ini
+++ /dev/null
@@ -1,89 +0,0 @@
-;***************************************************;
-;     Elecrow ESP32-S3 Terminal                     ;
-;           - ili9488 TFT SPI 4-WIRE or 16-bit RGB  ;
-;           - ft6236 touch controller               ;
-;***************************************************;
-
-[esp-terminal]
-extends = arduino_esp32s3_v2
-board = esp32-s3-devkitc-1
-board_build.arduino.memory_type = qio_opi
-
-build_flags =
-    ${arduino_esp32s3_v2.build_flags}
-    ${esp32s3.ps_ram}
-
-;region -- TFT_eSPI build options ------------------------
-    ;-D USER_SETUP_LOADED=1
-    -D LGFX_USE_V1=1
-    -D ILI9488_DRIVER=1
-    -D TFT_ROTATION=0 ; 0=0, 1=90, 2=180 or 3=270 degree
-    -D TFT_WIDTH=320
-    -D TFT_HEIGHT=480
-    -D TFT_RST=-1      ;// Reset pin (could connect to RST pin)
-    -D TFT_BCKL=46     ; Configurable via web UI (e.g. 2 for D4)
-    -D HASP_USE_LGFX_TOUCH=1
-    -D TOUCH_DRIVER=0x6336
-    -D TOUCH_IRQ=-1
-    -D I2C_TOUCH_PORT=0
-    -D I2C_TOUCH_ADDRESS=0x38
-    -D I2C_TOUCH_FREQUENCY=400000
-    -D SPI_TOUCH_FREQUENCY=0
-;endregion
-
-lib_deps =
-    ${arduino_esp32s3_v2.lib_deps}
-    ${lovyangfx.lib_deps}
-
-[esp-terminal-spi]
-extends = esp-terminal
-
-build_flags =
-    -D HASP_MODEL="ESP32-S3 Terminal SPI"
-    ${esp-terminal.build_flags}
-    -D TFT_MISO=14
-    -D TFT_MOSI=13
-    -D TFT_SCLK=12
-    -D TFT_CS=03       ;// Chip select control pin
-    -D TFT_DC=42       ;// Data Command control pin
-    -D SPI_FREQUENCY=60000000
-    -D SPI_READ_FREQUENCY=16000000
-    -D TFT_DMA_CHANNEL=1
-    -D TOUCH_SDA=02
-    -D TOUCH_SCL=01
-
-[esp-terminal-rgb]
-extends = esp-terminal
-
-build_flags =
-    -D HASP_MODEL="ESP32-S3 Terminal RGB"
-    ${esp-terminal.build_flags}
-
-    -D TFT_WR=18
-    -D TFT_RD=48
-    -D TFT_DC=45
-    -D TFT_D0=47
-    -D TFT_D1=21
-    -D TFT_D2=14
-    -D TFT_D3=13
-    -D TFT_D4=12
-    -D TFT_D5=11
-    -D TFT_D6=10
-    -D TFT_D7=9
-    -D TFT_D8=3
-    -D TFT_D9=8
-    -D TFT_D10=16
-    -D TFT_D11=15
-    -D TFT_D12=7
-    -D TFT_D13=6
-    -D TFT_D14=5
-    -D TFT_D15=4
-    -D SPI_FREQUENCY=80000000
-    -D TOUCH_SDA=38
-    -D TOUCH_SCL=39
-
-[env:esp-terminal-spi_16MB]
-extends = esp-terminal-spi, flash_16mb
-
-[env:esp-terminal-rgb_16MB]
-extends = esp-terminal-rgb, flash_16mb