Reorganize environments

user_setups/esp32/d1-mini-esp32_ili9341.ini

@@ -6,14 +6,8 @@
 ;***************************************************;
 
 [env:d1-mini-esp32_ili9341]
-platform = espressif32
+extends = esp32
-platform_packages = framework-arduinoespressif32
-framework = arduino
 board = wemos_d1_mini32
-;upload_port = COM5      ; To change the port, use platform_override.ini
-;monitor_port = COM5     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/d132-unoshield_ili9486_parallel.ini

@@ -5,12 +5,8 @@
 ;***************************************************;
 
 [env:d132-unoshield]
-platform = espressif32
+extends = esp32
 board = esp32dev
-upload_port = COM4      ; To change the port, use platform_override.ini
-monitor_port = COM4     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/esp32-dev_ili9488.ini

@@ -5,19 +5,8 @@
 ;***************************************************;
 
 [env:esp32dev-ili9488]
-platform = espressif32 @ ^2.0.0
+extends = esp32
 board = esp32dev
-upload_port = COM2      ; To change the port, use platform_override.ini
-monitor_port = COM2     ; To change the port, use platform_override.ini
-; upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-; upload_port = 10.4.0.171 ; IP of the ESP
-; upload_flags =
-;  --port=3232
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
-
-debug_tool = esp-prog
-debug_init_break = tbreak setup
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/esp32-dev_ili9488_parallel.ini

@@ -6,16 +6,8 @@
 ;***************************************************;
 
 [env:esp32dev-mrb3511]
-platform = espressif32 @ ^2.0.0
+extends = esp32
 board = esp32dev
-upload_port = COM1      ; To change the port, use platform_override.ini
-monitor_port = COM1     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
-check_tool = cppcheck
-check_flags = --enable=all
-debug_tool = esp-prog
-debug_init_break = tbreak setup
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/esp32cam_st7796.ini

@@ -6,20 +6,8 @@
 ;***************************************************;
 
 [env:esp32cam-st7796]
-platform = espressif32 @ ^2.0.0
+extends = esp32
 board = esp32cam
-; upload_port = COM18      ; To change the port, use platform_override.ini
-; monitor_port = COM18     ; To change the port, use platform_override.ini
-; upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-; upload_port = x.x.x.x; IP of the ESP
-; upload_flags =
-;  --port=3232
-
-debug_tool = esp-prog
-debug_init_break = tbreak setup
-;board_build.partitions = min_spiffs.csv
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 ;ESP32 CAM PINS
 build_flags =

user_setups/esp32/lanbon_l8.ini

@@ -6,14 +6,8 @@
 ;***************************************************;
 
 [env:lanbon_l8]
-platform = espressif32
+extends = esp32
-platform_packages = framework-arduinoespressif32
-framework = arduino
 board = esp32dev
-;upload_port = COM5      ; To change the port, use platform_override.ini
-;monitor_port = COM5     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/lolin-d32-pro_ili9341.ini

@@ -9,6 +9,7 @@
 
 [env:lolind32pro-lolintft24]
 extends = esp32
+board = lolin_d32_pro
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/m5stack_core2.ini

@@ -6,14 +6,8 @@
 ;***************************************************;
 
 [env:m5stack-core2]
-platform = espressif32
+extends = esp32
-platform_packages = framework-arduinoespressif32
-framework = arduino
 board = esp32dev
-;upload_port = COM5      ; To change the port, use platform_override.ini
-;monitor_port = COM5     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/nodemcu-32s_st7796.ini

@@ -6,14 +6,8 @@
 ;***************************************************;
 
 [env:nodemcu32s-raspi]
-platform = espressif32 @ ^2.0.0
+extends = esp32
 board = nodemcu-32s
-;upload_port = COM9      ; To change the port, use platform_override.ini
-;monitor_port = COM9     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
-debug_tool = esp-prog
-debug_init_break = tbreak setup
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/ttgo-esp32-lilygo-pi.ini

@@ -6,17 +6,8 @@
 ;***************************************************;
 
 [env:ttgo-esp32-lilygo-pi]
-platform = espressif32
+extends = esp32
 board = esp32dev
-;upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-;upload_port = 10.4.70.37 ; 10.4.0.198 ; IP of the ESP
-;upload_flags =
-; --port=3232
-
-;upload_port = COM9      ; To change the port, use platform_override.ini
-;monitor_port = COM9     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/ttgo-esp32-poe_ili9341.ini

@@ -7,17 +7,8 @@
 ;***************************************************;
 
 [env:ttgo_esp32_poe-lolintft24]
-platform = espressif32 @ ^2.0.0
+extends = esp32
 board = esp32dev
-;upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-;upload_port = 10.4.70.37 ; 10.4.0.198 ; IP of the ESP
-;upload_flags =
-; --port=3232
-
-;upload_port = COM9      ; To change the port, use platform_override.ini
-;monitor_port = COM9     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp32/wt32-sc01.ini

@@ -6,14 +6,8 @@
 ;***************************************************;
 
 [env:wt32-sc01]
-platform = espressif32
+extends = esp32
-platform_packages = framework-arduinoespressif32
-framework = arduino
 board = esp32dev
-;upload_port = COM5      ; To change the port, use platform_override.ini
-;monitor_port = COM5     ; To change the port, use platform_override.ini
-monitor_filters = esp32_exception_decoder
-board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
 
 build_flags =
     ${env.build_flags}

user_setups/esp8266/d1-mini-esp8266_ili9341.ini

@@ -6,15 +6,9 @@
 ;***************************************************;
 
 [env:d1-mini-esp8266_ili9341]
-platform = espressif8266@^2.6.2
+extends = esp8266
 board = d1_mini
-;upload_port = COM7      ; To change the port, use platform_override.ini
+
-;monitor_port = COM7     ; To change the port, use platform_override.ini
-monitor_filters = esp8266_exception_decoder
-board_build.f_flash = 40000000L
-board_build.flash_mode = dout
-board_build.ldscript = eagle.flash.4m2m.ld  ; 2Mb Spiffs
-board_build.f_cpu = 160000000L ; set frequency to 160MHz
 build_flags =
     ${env.build_flags}
     ${esp8266.build_flags}

user_setups/esp8266/esp8266_st7735.ini

@@ -5,14 +5,9 @@
 ;***************************************************;
 
 [env:esp12e-st7735]
-platform = espressif8266@^2.6.2
+extends = esp8266
 board = esp12e
-upload_port = COM8      ; To change the port, use platform_override.ini
+
-monitor_port = COM8     ; To change the port, use platform_override.ini
-board_build.f_flash = 40000000L
-board_build.flash_mode = dout
-board_build.ldscript = eagle.flash.4m2m.ld  ; 2Mb Spiffs
-board_build.f_cpu = 160000000L ; set frequency to 160MHz
 build_flags =
     ${env.build_flags}
     ${esp8266.build_flags}

user_setups/win32/emulator_64bits.ini

@@ -11,7 +11,7 @@ build_flags =
   ;-D LV_DRV_NO_CONF
   -D LV_MEM_SIZE=262144U           ; 256kB lvgl memory
   -D USE_MONITOR
-  -D MONITOR_ZOOM=1 ; 2
+  -D MONITOR_ZOOM=1  ; can be fractional like 1.5 or 2
   -D USE_MOUSE
   -D USE_MOUSEWHEEL
   -D USE_KEYBOARD
@@ -71,7 +71,7 @@ build_flags =
 
 lib_deps =
   ${env.lib_deps}
-  lv_drivers@~7.9.0
+  ;lv_drivers@~7.9.0
   ;lv_drivers=https://github.com/littlevgl/lv_drivers/archive/7d71907c1d6b02797d066f50984b866e080ebeed.zip
   https://github.com/eclipse/paho.mqtt.c.git
   bblanchon/ArduinoJson@^6.17.2    ; Json(l) parser