jeans/openHASP
jeans/openHASP
1
0
Fork 0
mirror of https://github.com/HASwitchPlate/openHASP.git synced 2025-07-24 11:46:34 +00:00
Code Issues Packages Projects Releases Wiki Activity

create user setup files

Browse Source
This commit is contained in:
arovak 2020-05-06 19:39:58 +02:00
parent ba9a7e204f
commit 66d663683d
10 changed files with 399 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
user_setups/esp32/d1-mini-esp32_ili9341.ini Normal file
View File

@ -0,0 +1,23 @@
;***************************************************;
; D1 Mini ESP32 with Lolin TFT 2.4" ;
; - D1-mini-esp32 board ;
; - ili9341 TFT ;
; - xpt2606 touch controller ;
;***************************************************;
[env:d1mini32-lolintft24]
platform = espressif32@^1.12.0
board = wemos_d1_mini32
upload_port = COM5 ; To change the port, use platform_override.ini
monitor_port = COM5 ; To change the port, use platform_override.ini
board_build.partitions = default.csv
build_flags =
${flags.esp32_flags}
; -- TFT_eSPI build options ------------------------
${lcd.lolin24}
${pins.vspi32}
-D TFT_DC=5
-D TFT_CS=26
-D TFT_RST=-1 ; RST
-D TFT_BCKL=-1 ; None, configurable via web UI (e.g. 21)
-D TOUCH_CS=17 ; (can also be 22 or 16)

49
user_setups/esp32/d132-unoshield_ili9486_parallel.ini Normal file
View File

@ -0,0 +1,49 @@
;***************************************************;
; ESP32 build with ;
; - Wemos "TTGo" D1 R32 board ;
; - ili9486 TFT ;
;***************************************************;
[env:d132-unoshield]
platform = espressif32
board = esp32dev
upload_port = COM4 ; To change the port, use platform_override.ini
monitor_port = COM4 ; To change the port, use platform_override.ini
build_flags =
${flags.esp32_flags}
; -- TFT_eSPI build options ------------------------
-D USER_SETUP_LOADED=1
;-D ST7796_DRIVER=1 ;3.95inch Arduino Display-UNO
-D ILI9486_DRIVER=1 ;3.5inch Arduino Display-UNO
-D ESP32_PARALLEL=1
-D TFT_ROTATION=${lcd.TFT_ROTATION}
-D TFT_WIDTH=320
-D TFT_HEIGHT=480
${pins.vspi32}
-D TFT_BCKL=-1 ;None, configurable via web UI (e.g. 2 for D4)
-D TFT_CS=33 ; Chip select control pin
-D TFT_DC=15 ; Data Command control pin - must use a pin in the range 0-31
-D TFT_RST=32 ; Reset pin
-D TFT_WR=4 ; Write strobe control pin - must use a pin in the range 0-31
-D TFT_RD=2
-D TFT_D0=12 ; Must use pins in the range 0-31 for the data bus
-D TFT_D1=13 ; so a single register write sets/clears all bits
-D TFT_D2=26
-D TFT_D3=25
-D TFT_D4=17
-D TFT_D5=16
-D TFT_D6=27
-D TFT_D7=14
-D SD_CS=5
-D SPI_FREQUENCY=40000000
;-D SPI_TOUCH_FREQUENCY=2500000 ; Uses ADC instead
-D SPI_READ_FREQUENCY=20000000
; -- Debugging options -----------------------------
; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
; -- Library options -------------------------------
lib_deps =
${env.lib_deps}
src_filter = +<*> +<../drivers/stm32f429_disco>

48
user_setups/esp32/esp32-dev_ili9488.ini Normal file
View File

@ -0,0 +1,48 @@
;***************************************************;
; Generic ESP32 build with ;
; - ili9488 TFT SPI 4-WIRE ;
; - xpt2606 touch controller ;
;***************************************************;
[env:esp32dev-ili9488]
platform = espressif32
board = esp32dev
upload_port = COM2 ; To change the port, use platform_override.ini
monitor_port = COM2 ; To change the port, use platform_override.ini
; upload_protocol = espota ; Use ArduinoOTA after flashing over serial
; upload_port = 10.4.0.171 ; IP of the ESP
; upload_flags =
; --port=3232
debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags =
${flags.esp32_flags}
; -- TFT_eSPI build options ------------------------
-D USER_SETUP_LOADED=1
-D ILI9488_DRIVER=1
-D TFT_ROTATION=0 ; 0=0, 1=90, 2=180 or 3=270 degree
-D TFT_WIDTH=320
-D TFT_HEIGHT=480
-D TFT_MISO=19 ;// (leave TFT SDO disconnected if other SPI devices share MISO)
-D TFT_MOSI=23
-D TFT_SCLK=18
-D TFT_CS=15 ;// Chip select control pin
-D TFT_DC=2 ;// Data Command control pin
-D TFT_RST=4 ;// Reset pin (could connect to RST pin)
-D TFT_BCKL=5 ;None, configurable via web UI (e.g. 2 for D4)
-D SUPPORT_TRANSACTIONS
-D TOUCH_CS=22
-D TOUCH_DRIVER=0 ; XPT2606 Resistive touch panel driver
-D SPI_FREQUENCY=27000000
-D SPI_TOUCH_FREQUENCY=2500000
-D SPI_READ_FREQUENCY=16000000
; -- Debugging options -----------------------------
; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
; -- Library options -------------------------------
lib_deps =
${env.lib_deps}
src_filter = +<*> +<../drivers/stm32f429_disco>

46
user_setups/esp32/esp32-dev_ili9488_parallel.ini Normal file
View File

@ -0,0 +1,46 @@
;***************************************************;
; Generic ESP32 build with ;
; - ESP32dev board ;
; - ili9488 TFT ;
; - GT911 touch controller ;
;***************************************************;
[env:esp32dev-mrb3511]
platform = espressif32
board = esp32dev
upload_port = COM1 ; To change the port, use platform_override.ini
monitor_port = COM1 ; To change the port, use platform_override.ini
debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags =
${flags.esp32_flags}
; -- TFT_eSPI build options ------------------------
${lcd.mrb3511}
-D TFT_BCKL=5 ;None, configurable via web UI (e.g. 2 for D4)
-D TFT_CS=33 ; Chip select control pin
-D TFT_DC=15 ; =RS; Data Command control pin - must use a pin in the range 0-31
-D TFT_RST=32 ; Reset pin
-D TFT_WR=4 ; Write strobe control pin - must use a pin in the range 0-31
-D TFT_RD=2
-D TFT_D0=12 ; Must use pins in the range 0-31 for the data bus
-D TFT_D1=13 ; so a single register write sets/clears all bits
-D TFT_D2=26
-D TFT_D3=25
-D TFT_D4=17
-D TFT_D5=16
-D TFT_D6=27
-D TFT_D7=14
-D TOUCH_SDA=21
-D TOUCH_SCL=22
-D TOUCH_IRQ=34 ; use 34-39 as these are input only pins
-D TOUCH_RST=-1 ; not used, connected to 3.3V
; -- Debugging options -----------------------------
; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
; -- Library options -------------------------------
lib_deps =
${env.lib_deps}
https://github.com/netwizeBE/arduino-goodix.git ; GT911 touch screen driver
src_filter = +<*> +<../drivers/stm32f429_disco>

41
user_setups/esp32/esp32cam_st7796.ini Normal file
View File

@ -0,0 +1,41 @@
;***************************************************;
; ESP32 build with ;
; - ESP32Cam board ;
; - st7796 TFT ;
; - xpt2606 touch controller ;
;***************************************************;
[env:esp32cam-st7796]
platform = espressif32
board = esp32cam
; upload_port = COM18 ; To change the port, use platform_override.ini
; monitor_port = COM18 ; To change the port, use platform_override.ini
; upload_protocol = espota ; Use ArduinoOTA after flashing over serial
; upload_port = x.x.x.x; IP of the ESP
; upload_flags =
; --port=3232
debug_tool = esp-prog
debug_init_break = tbreak setup
;board_build.partitions = min_spiffs.csv
board_build.partitions = default.csv
;ESP32 CAM PINS
build_flags =
${flags.esp32_flags}
; -- TFT_eSPI build options ------------------------
${lcd.raspberrypi}
-D USE_HSPI_PORT
${pins.hspi32}
-D TFT_CS=15
-D TFT_DC=2
-D TFT_RST=-1 ; 3.3v
-D TOUCH_CS=0 ; 3 ; RX
-D TFT_BCKL=-1
; -- Debugging options -----------------------------
; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
; -- Library options -------------------------------
lib_deps =
${env.lib_deps}

31
user_setups/esp32/nodemcu-32s_st7796.ini Normal file
View File

@ -0,0 +1,31 @@
;***************************************************;
; NodeMCU32S with build with ;
; - st7796 TFT ;
; - MHS-4" RPI Display-B ;
; - xpt2606 touch controller ;
;***************************************************;
[env:nodemcu32s-raspi]
platform = espressif32
board = nodemcu-32s
upload_port = COM3 ; To change the port, use platform_override.ini
monitor_port = COM3 ; To change the port, use platform_override.ini
debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags =
${flags.esp32_flags}
; -- TFT_eSPI build options ------------------------
${lcd.raspberrypi}
${pins.vspi32}
-D TFT_CS=15
-D TFT_DC=4
-D TFT_RST=32
-D TOUCH_CS=22
; -- Debugging options -----------------------------
; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
; -- Library options -------------------------------
lib_deps =
${env.lib_deps}

28
user_setups/esp8266/D1-mini_ili9341.ini Normal file
View File

@ -0,0 +1,28 @@
;***************************************************;
; D1 Mini ESP8266 with Lolin TFT 2.4" ;
; - D1-mini board ;
; - ili9341 TFT ;
; - xpt2606 touch controller ;
;***************************************************;
[env:d1mini-lolintft24]
platform = espressif8266@^2.4.0 ;@2.3.2
board = d1_mini
upload_port = COM7 ; To change the port, use platform_override.ini
monitor_port = COM7 ; To change the port, use platform_override.ini
board_build.f_flash = 40000000L
board_build.flash_mode = dout
board_build.ldscript = eagle.flash.4m2m.ld ; 2Mb Spiffs
board_build.f_cpu = 160000000L ; set frequency to 160MHz
build_flags =
${flags.esp8266_flags}
; -- TFT_eSPI build options ------------------------
${lcd.lolin24}
;-D TFT_MISO=12 ;D6 Use default HSPI
;-D TFT_MOSI=13 ;D7 Use default HSPI
;-D TFT_SCLK=14 ;D5 Use default HSPI
-D TFT_DC=15 ;D8
-D TFT_CS=16 ;D0
-D TFT_BCKL=-1 ;None, configurable via web UI (e.g. 2 for D4)
-D TOUCH_CS=0 ;D3 (can also be D1 or D2)
-D TFT_RST=-1 ;RST

38
user_setups/esp8266/esp8266_st7735.ini Normal file
View File

@ -0,0 +1,38 @@
;***************************************************;
; ESP8266 build with ;
; - ESP-12 board ;
; - st7735 TFT ;
;***************************************************;
[env:esp12e-st7735]
platform = espressif8266@^2.4.0 ;@2.3.2
board = esp12e
upload_port = COM8 ; To change the port, use platform_override.ini
monitor_port = COM8 ; To change the port, use platform_override.ini
board_build.f_flash = 40000000L
board_build.flash_mode = dout
board_build.ldscript = eagle.flash.4m2m.ld ; 2Mb Spiffs
board_build.f_cpu = 160000000L ; set frequency to 160MHz
build_flags =
${flags.esp8266_flags}
; -- TFT_eSPI build options ------------------------
-D USER_SETUP_LOADED=1
-D ST7735_DRIVER=1
-D ST7735_BLACKTAB=1
-D TFT_ROTATION=${lcd.TFT_ROTATION}
-D TFT_WIDTH=128
-D TFT_HEIGHT=160
-D TFT_MISO=-1 ;NC
-D TFT_MOSI=13 ;D7
-D TFT_SCLK=14 ;D5
-D TFT_CS=15 ;D8
-D TFT_DC=0 ;D3
-D TFT_BCKL=-1 ;None, configurable via web UI (e.g. 2 for D4)
-D TOUCH_CS=-1 ;NC
-D TFT_RST=2 ;D4
-D SPI_FREQUENCY=27000000
; -- Library options -------------------------------
lib_deps =
${env.lib_deps}
;Ethernet@<2.0.0

45
user_setups/stm32f4xx/stm32f407-black_ili9341.ini Normal file
View File

@ -0,0 +1,45 @@
;***************************************************;
; STM32F4 build with ;
; - DIY_more board ;
; - ili9341 TFT ;
; - xpt2046 touch controller ;
;***************************************************;
[env:black_f407vg]
platform = ststm32
board = diymore_f407vgt
board_build.mcu = stm32f407vgt6
upload_protocol = dfu
monitor_port = COM7 ; To change the port, use platform_override.ini
build_flags =
${env.build_flags}
${flags.stm32_flags}
-I include/stm32f4
; -- TFT_eSPI build options ------------------------
${lcd.lolin24}
;-D TFT_MISO=PB4 ;Default
;-D TFT_MOSI=PB5 ;Default
;-D TFT_SCLK=PB3 ;Default
-D TFT_CS=PE13 ;D8
-D TFT_DC=PE14 ;D3
-D TFT_BCKL=-1 ;None, configurable via web UI (e.g. 2 for D4)
-D TOUCH_CS=PA6 ;NC
-D TFT_RST=-1 ;D4
-D HASP_OUTPUT_PIN=PE0 ; User LED D2 on DevEBox board
-D HASP_INPUT_PIN=PD15 ; User Button K1 on DevEBox board
-D STM32_SERIAL1 ; Set this option to use Serial1 as default sersial port, leave out if using Serial2
-D HAL_ETH_MODULE_ENABLED=1 ; enable ethernet support
-D LAN8742A_PHY_ADDRESS=0x01U ; set LAN8720 PHY address
-D HASP_USE_TASMOTA_SLAVE=1
lib_deps =
${env.lib_deps}
Ticker@^3.1.5
; STM32duino LwIP@^2.1.2
; STM32duino STM32Ethernet@^1.0.5
https://github.com/stm32duino/LwIP.git
https://github.com/stm32duino/STM32Ethernet.git
src_filter = +<*> -<.git/> -<.svn/> -<example/> -<examples/> -<test/> -<tests/> -<lv_lib_zifont/> +<stm32f4/>
;***************************************************

50
user_setups/stm32f4xx/stm32f407-devebox_ili9341.ini Normal file
View File

@ -0,0 +1,50 @@
;***************************************************;
; STM32F4xx build with ;
; - DevEBox board ;
; - ili9341 TFT ;
; - xpt2046 touch controller ;
;***************************************************;
[env:DevEBox_STM32F4xx]
platform = ststm32
board = black_f407zg
board_build.mcu = stm32f407vgt6
; upload_protocol = dfu
upload_protocol = stlink
debug_tool = stlink
monitor_port = COM19 ; To change the port, use platform_override.ini
build_flags =
${env.build_flags}
${flags.stm32_flags}
-I include/stm32f4
; -- TFT_eSPI build options ------------------------
${lcd.lolin24}
;-D TFT_MISO=PB4 ;Default
;-D TFT_MOSI=PB5 ;Default
;-D TFT_SCLK=PB3 ;Default
-D TFT_CS=PE13 ;D8
-D TFT_DC=PE14 ;D3
-D TFT_BCKL=-1 ;None, configurable via web UI (e.g. 2 for D4)
-D TOUCH_CS=PA6 ;NC
-D TFT_RST=-1 ;D4
-D STM32
-D TFT_SPI3
-D USE_DMA_TO_TFT
-D HASP_USE_TASMOTA_SLAVE=1
-D HASP_OUTPUT_PIN=PA1 ; User LED D2 on DevEBox board
-D HASP_INPUT_PIN=PA0 ; User Button K1 on DevEBox board
-D STM32_SERIAL1 ; Set this option to use Serial1 as default sersial port, leave out if using Serial2
-D HASP_USE_ETHERNET=1
-D HAL_ETH_MODULE_ENABLED=1
-D LAN8742A_PHY_ADDRESS=0x01U
; -D DP83848_PHY_ADDRESS=0x01U
lib_deps =
${env.lib_deps}
Ticker@^3.1.5
; STM32duino LwIP@^2.1.2
; STM32duino STM32Ethernet@^1.0.5
https://github.com/stm32duino/LwIP.git
https://github.com/stm32duino/STM32Ethernet.git
src_filter = +<*> -<.git/> -<.svn/> -<example/> -<examples/> -<test/> -<tests/> -<lv_lib_zifont/> +<stm32f4/>