Add esp32-2432s028_v2 #396

.github/workflows/build.yaml

@@ -51,7 +51,7 @@ jobs:
           - out: seeed-studios
             env: "sensecap-indicator-d1_8MB"
           - out: sunton
-            env: "esp32-2432s028r_4MB -e esp32-2432s028r-ili9342_4MB -e esp32-2432s032c_4MB -e esp32-3248s035c_4MB -e esp32-3248s035r_4MB -e sunton-4827s043c_16MB -e sunton-8048s043c_16MB -e sunton-8048s050c_16MB -e sunton-8048s070c_16MB"
+            env: "esp32-2432s028r_4MB -e esp32-2432s028r-ili9342_4MB -e esp32-2432s028r_v2_4MB -e esp32-2432s032c_4MB -e esp32-3248s035c_4MB -e esp32-3248s035r_4MB -e sunton-4827s043c_16MB -e sunton-8048s043c_16MB -e sunton-8048s050c_16MB -e sunton-8048s070c_16MB"
           - out: waveshare
             env: "esp32-one_ili9486 -e esp32-one_st7796"
           - out: wireless-tag

src/drv/tft/tft_driver_lovyangfx.cpp

@@ -95,9 +95,8 @@ static lgfx::Bus_Parallel8* init_parallel_8_bus(Preferences* prefs, int8_t data_
     cfg.pin_wr               = prefs->getInt("wr", TFT_WR);
     cfg.pin_rs               = prefs->getInt("rs", TFT_DC);
 #ifndef CONFIG_IDF_TARGET_ESP32C3
-    cfg.freq_write           = prefs->getUInt("write_freq", SPI_FREQUENCY);
+    cfg.freq_write = prefs->getUInt("write_freq", SPI_FREQUENCY);
-#endif 
+#endif
-
 
 #if !defined(CONFIG_IDF_TARGET_ESP32S3) && !defined(CONFIG_IDF_TARGET_ESP32C3)
     uint8_t port = prefs->getUInt("i2s_port", 0);
@@ -717,7 +716,7 @@ void LovyanGfx::init(int w, int h)
         cfg.dummy_read_bits  = 1;
         cfg.readable         = true;
         cfg.invert           = INVERT_COLORS;
-        cfg.rgb_order        = false;
+        cfg.rgb_order        = (TFT_RGB_ORDER != 0); // true if the red and blue of the panel are swapped
         cfg.dlen_16bit       = false;
         cfg.bus_shared       = false;
         _panel_instance->config(cfg);

user_setups/esp32/esp32-2432s028.ini

@@ -128,3 +128,76 @@ lib_deps =
     ;${tft_espi.lib_deps}
     ${lovyangfx.lib_deps}
     ;${goodix.lib_deps}
+
+[esp32-2432s028_v2]
+extends = arduino_esp32_v2
+board = esp32dev
+upload_speed = 921600
+
+build_flags =
+    ${arduino_esp32_v2.build_flags}
+    ${esp32.no_ps_ram}
+
+; TFT_ROTATION values:
+; 0 - 0 deg (= default when not set)
+; 1 - 90 deg anti-clockwise (from 0 deg)
+; 2 - 180 deg anti-clockwise
+; 3 - 270 deg anti-clockwise
+; 4 - mirror content, and rotate 180 deg anti-clockwise
+; 5 - mirror content, and rotate 270 deg anti-clockwise
+; 6 - mirror content, and rotate 0 deg anti-clockwise
+; 7 - mirror content, and rotate 90 deg anti-clockwise
+
+;region -- TFT_eSPI build options ------------------------
+    ; -D USER_SETUP_LOADED=1
+    -D LGFX_USE_V1=1
+    -D ILI9341_DRIVER=1 ;
+    -D TFT_ROTATION=6 ; 0=0, 1=90, 2=180 or 3=270 degree, Mirrors: 6, 5, 4, 3
+    -D TFT_WIDTH=320
+    -D TFT_HEIGHT=240
+    -D TFT_RST=-1
+    -D TFT_SCLK=14
+    -D TFT_DC=2
+    -D TFT_CS=15
+    -D TFT_MOSI=13
+    -D TFT_MISO=12
+    -D TFT_BCKL=21
+    -D SUPPORT_TRANSACTIONS
+    -D SPI_FREQUENCY=55000000
+    -D SPI_READ_FREQUENCY=20000000
+    -D TOUCH_OFFSET_ROTATION=2  ; 1=swap xy, 2=invert x, 4=inverty
+    -D TFT_RGB_ORDER=1       ; Colour order Red-Green-Blue
+
+    -D ESP32_2432S028R=1
+;endregion
+
+; -- Debugging options -----------------------------
+;   -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+
+lib_deps =
+    ${arduino_esp32_v2.lib_deps}
+    ${lovyangfx.lib_deps}
+
+[env:esp32-2432s028r_v2_4MB]
+extends = esp32-2432s028_v2, flash_4mb
+build_flags =
+    ${esp32-2432s028_v2.build_flags}
+    -D TOUCH_DRIVER=0x2046 ; XPT2606 Resistive touch panel driver
+    -D HASP_USE_LGFX_TOUCH=1
+    -D TOUCH_CS=33
+    -D TOUCH_SCLK=25
+    -D TOUCH_MOSI=32
+    -D TOUCH_MISO=39
+    -D TOUCH_SDA=-1
+    -D TOUCH_SCL=-1
+    -D TOUCH_IRQ=36
+    -D SPI_TOUCH_FREQUENCY=2500000
+
+; -- Debugging options -----------------------------
+;   -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_VERBOSE
+
+lib_deps =
+    ${esp32-2432s028_v2.lib_deps}
+    ;${tft_espi.lib_deps}
+    ${lovyangfx.lib_deps}
+    ;${goodix.lib_deps}