Add ESP32-Touchdown

user_setups/esp32/esp32-touchdown.ini

@@ -0,0 +1,46 @@
+[env:esp32dev-touchdown]
+extends = esp32
+board = esp32dev
+
+build_flags =
+    ${env.build_flags}
+    ${esp32.build_flags}
+    ${esp32.vspi}        ; Use VSPI hardware SPI bus
+
+;region -- TFT_eSPI build options ------------------------
+    -D USER_SETUP_LOADED=1
+    -D ILI9488_DRIVER=1
+    -D TFT_ROTATION=0 ; 0=0, 1=90, 2=180 or 3=270 degree
+    -D TFT_WIDTH=320
+    -D TFT_HEIGHT=480
+    -D TFT_CS=15  ;// Chip select control pin
+    -D TFT_DC=2  ;// Data Command control pin
+    -D TFT_RST=4 ;// Reset pin (could connect to RST pin)
+    -D TFT_BCKL=5  ;None, configurable via web UI (e.g. 2 for D4)
+    -D SUPPORT_TRANSACTIONS
+    -D TOUCH_DRIVER=6336 ; XPT2606 Resistive touch panel driver 
+    -D TOUCH_SDA=21
+    -D TOUCH_SCL=22
+    -D TOUCH_IRQ=27   ; not connected
+    -D TOUCH_RST=-1   ; not used, connected to 3.3V
+    -D TOUCH_FREQUENCY=400000
+    -D SPI_FREQUENCY=27000000
+    -D SPI_READ_FREQUENCY=16000000
+;endregion
+
+; GPIO18 -> SPI Clock
+; GPIO23 -> SDI (MOSI)
+
+; -- Debugging options -----------------------------
+;   -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+
+;region -- Library options -------------------------------
+lib_deps =
+    ${env.lib_deps}
+    ${esp32.lib_deps}
+    git+https://github.com/aselectroworks/Arduino-FT6336U.git
+
+lib_ignore =
+    ${env.lib_ignore}
+    ${esp32.lib_ignore}
+;endregion