diff --git a/src/drv/tft/tft_driver_lovyangfx.cpp b/src/drv/tft/tft_driver_lovyangfx.cpp
index fa4fa5ff..8974f319 100644
--- a/src/drv/tft/tft_driver_lovyangfx.cpp
+++ b/src/drv/tft/tft_driver_lovyangfx.cpp
@@ -87,8 +87,9 @@ void LovyanGfx::init(int w, int h)
         cfg.pin_d4     = TFT_D4;
         cfg.pin_d5     = TFT_D5;
         cfg.pin_d6     = TFT_D6;
-        cfg.pin_d7     = TFT_D7 bus->config(cfg); // 設定値をバスに反映します。
-        tft._panel_instance.setBus(bus);          // Set the bus on the panel.
+        cfg.pin_d7     = TFT_D7;
+        bus->config(cfg); // 設定値をバスに反映します。
+        tft._panel_instance->setBus(bus);          // Set the bus on the panel.
     }
 #else
     {                    // Set SPI bus control
diff --git a/user_setups/esp32s2/wt32-86.ini b/user_setups/esp32s2/wt32-86.ini
new file mode 100644
index 00000000..e76729cf
--- /dev/null
+++ b/user_setups/esp32s2/wt32-86.ini
@@ -0,0 +1,70 @@
+;***************************************************;
+;        Wireless-Tag WT-86-32-3ZW1                 ;
+;               - custom ESP32-S2 pcb               ;
+;               - ili9488 TFT                       ;
+;               - ft???? touch controller           ;
+;***************************************************;
+
+[env:wt32-86_ili9488]
+extends = esp32s2_16mb_v2
+board = esp32s2
+
+build_flags =
+    ${env.build_flags}
+    ${esp32s2.build_flags}
+
+;region -- TFT_eSPI build options ------------------------
+    -D ILI9488_DRIVER=1
+    -D TFT_WIDTH=320
+    -D TFT_HEIGHT=320
+    -D TFT_ROTATION=0 ; Use default, see TFT_ROTATION values
+
+    -D TFT_BCKL=-1  ;None, configurable via web UI (e.g. 2 for D4)
+    -D TFT_CS=-1  ; Chip select control pin, connected to GND
+    -D TFT_DC=38  ; =RS; Data Command control pin - must use a pin in the range 0-31
+    -D TFT_RST=37 ; Reset pin
+    -D TFT_WR=39   ; Write strobe control pin - must use a pin in the range 0-31
+    -D TFT_RD=-1  ; Read pin, pulled-up
+    -D TFT_D0=36  ; Must use pins in the range 0-31 for the data bus
+    -D TFT_D1=35  ; so a single register write sets/clears all bits
+    -D TFT_D2=34
+    -D TFT_D3=33
+    -D TFT_D4=21
+    -D TFT_D5=18
+    -D TFT_D6=17
+    -D TFT_D7=16
+    -D ESP32_PARALLEL
+    -D TOUCH_SDA=15
+    -D TOUCH_SCL=14
+    -D TOUCH_IRQ=13
+    -D TOUCH_RST=12
+
+    ; dummy SPI
+    -D TFT_SCLK=-1
+    -D TFT_MISO=-1
+    -D TFT_MOSI=-1
+    
+    -D SPI_FREQUENCY=40000000
+    -D SPI_READ_FREQUENCY=20000000
+    ;-D USER_SETUP_LOADED=1
+    -D LGFX_USE_V1=1
+    -D SUPPORT_TRANSACTIONS
+    -D SPI_TOUCH_FREQUENCY=2500000
+    -D TOUCH_DRIVER=0x0     ; XPT2046 Resistive SPI touch panel driver
+ 
+    -D I2C_TOUCH_PORT=0
+    -D I2C_TOUCH_ADDRESS=0
+    -D I2C_TOUCH_FREQUENCY=0
+;endregion
+
+;region -- Library options -------------------------------
+lib_deps =
+    ${env.lib_deps}
+    ${esp32s2.lib_deps}
+    lovyan03/LovyanGFX @ ^0.4.12
+
+lib_ignore =
+    ${env.lib_ignore}
+    ${esp32s2.lib_ignore}
+    TFT_eSPI
+;endregion