Make HASP_LOG_LEVEL default to LOG_LEVEL_TRACE

include/hasp_macro.h

@@ -4,6 +4,11 @@
 #if defined(WINDOWS) || defined(POSIX)
 #define LOG_OUTPUT(x, ...) printf(__VA_ARGS__)
 #else
+
+#ifndef HASP_LOG_LEVEL
+#define HASP_LOG_LEVEL LOG_LEVEL_TRACE
+#endif
+
 #define LOG_OUTPUT(...) Log.output(...)
 
 #if HASP_LOG_LEVEL >= LOG_LEVEL_FATAL

platformio.ini

@@ -61,7 +61,6 @@ build_flags =
     -D HASP_VER_MAJ=0
     -D HASP_VER_MIN=6
     -D HASP_VER_REV=0
-    -D HASP_LOG_LEVEL=LOG_LEVEL_OUTPUT
     ${override.build_flags}
 
 ; -- Shared library dependencies in all environments

src/drv/old/hasp_drv_tft_espi.cpp

@@ -13,6 +13,7 @@
 
 #include "hasp_drv_tft_espi.h"
 #include "ArduinoLog.h"
+#include "hasp_debug.h"
 #include "hasp_macro.h"
 
 void tft_espi_calibrate(uint16_t* calData)

src/hasp_debug.h

@@ -4,7 +4,10 @@
 #ifndef HASP_DEBUG_H
 #define HASP_DEBUG_H
 
+#include "hasp_conf.h"
+
 #include "ArduinoJson.h"
+#include "hasp_debug.h"
 #include "hasp_macro.h"
 #include "lvgl.h"
 

src/main_arduino copy.cpp

@@ -1,193 +0,0 @@
-/* MIT License - Copyright (c) 2019-2021 Francis Van Roie
-   For full license information read the LICENSE file in the project folder */
-
-#if 0 && ARDUINO
-
-#include <Arduino.h>
-#include "lvgl.h"
-#include "hasp_conf.h" // load first
-
-#if HASP_USE_CONFIG > 0
-#include "hasp_debug.h"
-#endif
-
-#if HASP_USE_CONFIG > 0
-#include "hasp_config.h"
-#include "hasp_gui.h"
-#endif
-
-#include "hasp_oobe.h"
-
-#include "hasp/hasp_dispatch.h"
-#include "hasp/hasp.h"
-
-#include "sys/net/hasp_network.h"
-
-#include "dev/device.h"
-
-bool isConnected;
-uint8_t mainLoopCounter        = 0;
-unsigned long mainLastLoopTime = 0;
-
-void setup()
-{
-    hal_setup();
-
-    haspDevice.init();
-
-    /****************************
-     * Storage initializations
-     ***************************/
-#if HASP_USE_EEPROM > 0
-    eepromSetup(); // Don't start at boot, only at write
-#endif
-
-    // #if HASP_USE_SPIFFS > 0 || HASP_USE_LITTLEFS > 0
-    //     filesystemSetup();  // FS mount is done in configSetup()
-    // #endif
-
-    // #if HASP_USE_SDCARD > 0
-    //     sdcardSetup();
-    // #endif
-
-    /****************************
-     * Read & Apply User Configuration
-     ***************************/
-#if HASP_USE_CONFIG > 0
-    configSetup(); // also runs debugSetup() and debugStart()
-#endif
-
-    dispatchSetup();
-    guiSetup();
-
-#if HASP_USE_GPIO > 0
-    gpioSetup();
-#endif
-
-    /****************************
-     * Apply User Configuration
-     ***************************/
-
-#if HASP_USE_MQTT > 0
-    mqttSetup(); // Load Hostname before starting WiFi
-#endif
-
-#if HASP_USE_WIFI > 0 || HASP_USE_ETHERNET > 0
-    networkSetup();
-#endif
-
-#if HASP_USE_CONFIG > 0
-    if(!oobeSetup())
-#endif
-    {
-        haspSetup();
-    }
-
-#if HASP_USE_MDNS > 0
-    mdnsSetup();
-#endif
-
-#if HASP_USE_OTA > 0
-    otaSetup();
-#endif
-
-#if HASP_USE_HTTP > 0
-    httpSetup();
-#endif
-
-#if HASP_USE_TELNET > 0
-    telnetSetup();
-#endif
-
-#if HASP_USE_TASMOTA_CLIENT > 0
-    slaveSetup();
-#endif
-
-    mainLastLoopTime = millis() - 1000; // reset loop counter
-    delay(20);
-    guiStart();
-}
-
-void loop()
-{
-    networkLoop();
-    guiLoop();
-    haspLoop();
-
-#if HASP_USE_MQTT > 0
-    mqttLoop();
-#endif // MQTT
-
-#if HASP_USE_TASMOTA_CLIENT > 0
-    slaveLoop();
-#endif // TASMOTASLAVE
-
-#if HASP_USE_HTTP > 0
-    httpLoop();
-#endif // HTTP
-
-#if HASP_USE_GPIO > 0
-    gpioLoop();
-#endif // GPIO
-
-#if HASP_USE_OTA > 0
-    otaLoop();
-#endif // OTA
-
-#if HASP_USE_MDNS > 0
-    mdnsLoop();
-#endif // MDNS
-
-#if HASP_USE_TELNET > 0
-    telnetLoop(); // Console
-#endif // TELNET
-
-    debugLoop(); // Console
-    haspDevice.loop();
-
-    /* Timer Loop */
-    if(millis() - mainLastLoopTime >= 1000) {
-        /* Runs Every Second */
-        haspEverySecond();  // sleep timer
-        debugEverySecond(); // statusupdate
-
-#if HASP_USE_OTA > 0
-        otaEverySecond(); // progressbar
-#endif
-
-        /* Runs Every 5 Seconds */
-        if(mainLoopCounter == 0 || mainLoopCounter == 5) {
-            isConnected = networkEvery5Seconds(); // Check connection
-
-#if HASP_USE_HTTP > 0
-            // httpEvery5Seconds();
-#endif
-
-#if HASP_USE_MQTT > 0
-            mqttEvery5Seconds(isConnected);
-#endif
-
-#if HASP_USE_GPIO > 0
-            //   gpioEvery5Seconds();
-#endif
-
-            haspDevice.loop_5s();
-        }
-
-        /* Reset loop counter every 10 seconds */
-        if(mainLoopCounter >= 9) {
-            mainLoopCounter = 0;
-        } else {
-            mainLoopCounter++;
-        }
-        mainLastLoopTime += 1000;
-    }
-
-#ifdef ARDUINO_ARCH_ESP8266
-    delay(2);
-#else
-    delay(6);
-#endif
-}
-
-#endif

src/main_arduino.cpp

@@ -12,6 +12,7 @@
 
 #if HASP_USE_CONFIG > 0
 #include "hasp_debug.h"
+#include "hasp_macro.h"
 #endif
 
 #if HASP_USE_CONFIG > 0