diff --git a/docs/01-hardware.md b/docs/01-hardware.md
index a20233d7..261ad6a6 100644
--- a/docs/01-hardware.md
+++ b/docs/01-hardware.md
@@ -48,6 +48,8 @@ table th:last-of-type {
 ## Recommended Display
 #### Lolin TFT 2.4"
 
+![TFT-LED PWM dimming](assets/images/lolin24tft.png)
+
 ILI9341 SPI touchscreens with backlight dimming via PWM are quite cheap to get.
 An ILI9341 TFT display with SPI is required when using a pre-built binary.
 The touchcontroller needs to be the XPT2046 Resistive Touch driver.
@@ -62,7 +64,7 @@ Therefor the Lolin TFT 2.4 Touch Shield is used as the development display of ch
 To use PWM dimming on the Lolin TFT 2.4" you must solder the TFT-LED pin to either D1, D2 or D4.
 **D1 is recommended** for backlight control and configured by default.
 
-![TFT-LED PWM dimming](https://github.com/fvanroie/hasp-lvgl/blob/master/docs/img/tft-led-pwm.png)
+![TFT-LED PWM dimming](assets/images/tft-led-pwm.png)
 
 !> **Warning:**</br>Do *not* use D3 for backlight control because it is already in use for touch!
 
@@ -70,6 +72,8 @@ To use PWM dimming on the Lolin TFT 2.4" you must solder the TFT-LED pin to eith
 
 ##### Compatible ESP boards
 
+![TFT-LED PWM dimming](assets/images/esp_boards.png)
+
 The Lolin TFT 2.4" header is **plug-and-play** compatible with these development boards,
 no need to use any jumper cables:
 
diff --git a/docs/assets/images/esp_boards.png b/docs/assets/images/esp_boards.png
new file mode 100644
index 00000000..140c331e
Binary files /dev/null and b/docs/assets/images/esp_boards.png differ
diff --git a/docs/assets/images/lolin24tft.png b/docs/assets/images/lolin24tft.png
new file mode 100644
index 00000000..7b6278b4
Binary files /dev/null and b/docs/assets/images/lolin24tft.png differ
diff --git a/docs/assets/images/tft-led-pwm.png b/docs/assets/images/tft-led-pwm.png
new file mode 100644
index 00000000..20ec4939
Binary files /dev/null and b/docs/assets/images/tft-led-pwm.png differ