diff --git a/user_setups/esp32/lanbon_l8.ini b/user_setups/esp32/lanbon_l8.ini
index 4b82491b..f595e4b9 100644
--- a/user_setups/esp32/lanbon_l8.ini
+++ b/user_setups/esp32/lanbon_l8.ini
@@ -28,15 +28,20 @@ build_flags =
     -D TFT_MOSI=23       ; FCP pin6 SDA
     -D TFT_MISO=25       ; FCP pin7 SDO
     -D TFT_BCKL=5
-    ;CONFIG_LVGL_TOUCH_SCL_GPIO=0
-    ;CONFIG_LVGL_TOUCH_SDA_GPIO=4
-    ;-D TOUCH_CS=22
+    -D TOUCH_DRIVER=6336
+    -D TOUCH_SDA=4
+    -D TOUCH_SCL=0
+    -D TOUCH_IRQ=-1   ; use 34-39 as these are input only pins
+    -D TOUCH_RST=-1   ; not used, connected to 3.3V
+    -D USE_TFT_ESPI=1
 ;endregion
 
 ;region -- Library options -------------------------------
 lib_deps =
     ${env.lib_deps}
     ${esp32.lib_deps}
+    ;git+https://github.com/lvgl/lvgl_esp32_drivers.git
+    git+https://github.com/aselectroworks/Arduino-FT6336U.git
 
 lib_ignore =
     ${env.lib_ignore}
diff --git a/user_setups/lcd_config.ini b/user_setups/lcd_config.ini
index df368458..3fec8f35 100644
--- a/user_setups/lcd_config.ini
+++ b/user_setups/lcd_config.ini
@@ -47,6 +47,7 @@ mrb3511 =
     -D USER_SETUP_LOADED=1
     -D TOUCH_DRIVER=911 ; GT911 Capacitive I2C touch panel driver
     -D SUPPORT_TRANSACTIONS
+    -D I2C_TOUCH_FREQUENCY=400000
 
 st7789v =
     -D ST7789_DRIVER=1
@@ -64,6 +65,7 @@ st7789v =
     -D USER_SETUP_LOADED=1
     -D TOUCH_DRIVER=6336       ; FT6336U Capacitive I2C touch panel driver
     -D SUPPORT_TRANSACTIONS
+    -D I2C_TOUCH_FREQUENCY=400000
 
 wireless-tag =
     -D ST7796_DRIVER=1
@@ -75,3 +77,4 @@ wireless-tag =
     -D USER_SETUP_LOADED=1
     -D TOUCH_DRIVER=6336 ; FT6336U Capacitive I2C touch panel driver
     -D SUPPORT_TRANSACTIONS
+    -D I2C_TOUCH_FREQUENCY=400000