diff --git a/platformio_override_OLD.ini b/platformio_override_OLD.ini
deleted file mode 100644
index b8058818..00000000
--- a/platformio_override_OLD.ini
+++ /dev/null
@@ -1,240 +0,0 @@
-[override]
-; -- Hasp config options ----------------------
-build_flags =
-; -- Use settings from file user_config_override.h
- -DUSE_CONFIG_OVERRIDE
-
-;***************************************************
-; Generic ESP32 build with ILI9488 SPI 4-WIRE
-;***************************************************
-[env:esp32dev-ILI9488]
-platform = espressif32
-board = esp32dev
-upload_port = COM11 ; Change to the correct port
-monitor_port = COM11 ; Change to the correct port
-; upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-; upload_port = 10.4.0.171 ; IP of the ESP
-; upload_flags =
-; --port=3232
-monitor_speed = 115200
-debug_tool = esp-prog
-debug_init_break = tbreak setup
-
-build_flags =
- ${flags.esp32_flags}
-; -- TFT_eSPI build options ------------------------
- -D ILI9488_DRIVER=1
- -D TFT_BCKL=5 ;None, configurable via web UI (e.g. 2 for D4)
- -D TFT_WIDTH=320
- -D TFT_HEIGHT=480
- -D TFT_ROTATION=0 ; 0=0, 1=90, 2=180 or 3=270 degree
- -D USER_SETUP_LOADED=1
- -D TFT_MISO=19 ;// (leave TFT SDO disconnected if other SPI devices share MISO)
- -D TFT_MOSI=23
- -D TFT_SCLK=18
- -D TFT_CS=15 ;// Chip select control pin
- -D TFT_DC=2 ;// Data Command control pin
- -D TFT_RST=4 ;// Reset pin (could connect to RST pin)
- -D SUPPORT_TRANSACTIONS
- -D TOUCH_CS=22
- -D TOUCH_DRIVER=0 ; XPT2606 Resistive touch panel driver
- -D SPI_FREQUENCY=27000000
- -D SPI_TOUCH_FREQUENCY=2500000
- -D SPI_READ_FREQUENCY=16000000
-
-; -- Debugging options -----------------------------
-; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-
-; -- Library options -------------------------------
-lib_deps =
- ${env.lib_deps}
-
-src_filter = +<*> +<../drivers/stm32f429_disco>
-
-
-[env:esp32dev-mrb3511]
-; upload_port = COM11 ; Change to the correct port
-; monitor_port = COM11 ; Change to the correct port
-upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-upload_port = 10.4.0.171 ; IP of the ESP
-upload_flags =
- --port=3232
-
-
-[env:nodemcu32s-raspi]
-; upload_port = COM11 ; Change to the correct port
-; monitor_port = COM11 ; Change to the correct port
-upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-upload_port = 10.4.0.151 ; IP of the ESP
-upload_flags =
- --port=3232
-
-
-
-;***************************************************
-; ESP32CAM with MHS-4" RPI Display-B
-;***************************************************
-[env:esp32cam-raspi]
-platform = espressif32
-board = esp32cam
-; upload_port = COM18 ; To change the port, use platform_override.ini
-; monitor_port = COM18 ; To change the port, use platform_override.ini
-upload_protocol = espota ; Use ArduinoOTA after flashing over serial
-upload_port = 10.4.0.166 ; IP of the ESP
-upload_flags =
- --port=3232
-
-debug_tool = esp-prog
-debug_init_break = tbreak setup
-;board_build.partitions = min_spiffs.csv
-board_build.partitions = default.csv
-;ESP32 CAM PINS
-build_flags =
- ${flags.esp32_flags}
-; -- TFT_eSPI build options ------------------------
- ${lcd.raspberrypi}
- -D USE_HSPI_PORT
- ${pins.hspi32}
- -D TFT_CS=15
- -D TFT_DC=2
- -D TFT_RST=-1 ; 3.3v
- -D TOUCH_CS=0 ; 3 ; RX
- -D TFT_BCKL=-1
-
-; -- Debugging options -----------------------------
-; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-
-; -- Library options -------------------------------
-lib_deps =
- ${env.lib_deps}
-
-;***************************************************
-; ESP32 Programmer with MHS-4" RPI Display-B
-;***************************************************
-[env:programmer-raspi]
-platform = espressif32
-board = esp32dev
-upload_port = COM11 ; To change the port, use platform_override.ini
-monitor_port = COM11 ; To change the port, use platform_override.ini
-debug_tool = esp-prog
-debug_init_break = tbreak setup
-
-build_flags =
- ${flags.esp32_flags}
-; -- TFT_eSPI build options ------------------------
- ; ${lcd.raspberrypi}
- ${lcd.lolin24}
- ${pins.hspi32}
- -D TFT_CS=15
- -D TFT_DC=4
- -D TFT_RST=-1
- -D TOUCH_CS=5
- -D USE_HSPI_PORT=1
-
-; -- Debugging options -----------------------------
-; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-
-; -- Library options -------------------------------
-lib_deps =
- ${env.lib_deps}
-
-;***************************************************
-; STM32F4 build
-;***************************************************
-[env:DevEBox]
-platform = ststm32
-board = black_f407zg
-board_build.mcu = stm32f407vgt6
-; upload_protocol = dfu
-upload_protocol = stlink
-debug_tool = stlink
-monitor_port = COM19 ; To change the port, use platform_override.ini
-build_flags =
- ${env.build_flags}
- ${flags.stm32_flags}
- -I include/stm32f4
-; -- TFT_eSPI build options ------------------------
- ${lcd.lolin24}
- ;-D TFT_MISO=PB4 ;Default
- ;-D TFT_MOSI=PB5 ;Default
- ;-D TFT_SCLK=PB3 ;Default
- -D TFT_CS=PE13 ;D8
- -D TFT_DC=PE14 ;D3
- -D TFT_BCKL=-1 ;None, configurable via web UI (e.g. 2 for D4)
- -D TOUCH_CS=PA6 ;NC
- -D TFT_RST=-1 ;D4
- ; -D STM32
- -D TFT_SPI1
- -D USE_DMA_TO_TFT
- -D HASP_USE_TASMOTA_SLAVE=1
- -D HASP_OUTPUT_PIN=PA1 ; User LED D2 on DevEBox board
- -D HASP_INPUT_PIN=PA0 ; User Button K1 on DevEBox board
- -D STM32_SERIAL1 ; Set this option to use Serial1 as default sersial port, leave out if using Serial2
- -D HASP_USE_ETHERNET=1
- -D HAL_ETH_MODULE_ENABLED=1
- -D LAN8742A_PHY_ADDRESS=0x01U
- ; -D DP83848_PHY_ADDRESS=0x00U
-
-
-lib_deps =
- ${env.lib_deps}
- Ticker@^3.1.5
- ; STM32duino LwIP@^2.1.2
- ; STM32duino STM32Ethernet@^1.0.5
- https://github.com/stm32duino/LwIP.git
- https://github.com/stm32duino/STM32Ethernet.git
- ; https://github.com/andrethomas/TasmotaSlave.git
-
-src_filter = +<*> -<.git/> -<.svn/> - - - - - +
-
-
-;***************************************************
-; STM32F4 build
-;***************************************************
-[env:DIYMore_f407vg]
-platform = ststm32
-board = diymore_f407vgt
-board_build.mcu = stm32f407vgt6
-upload_protocol = dfu
-monitor_port = COM7 ; To change the port, use platform_override.ini
-build_flags =
- ${env.build_flags}
- ${flags.stm32_flags}
- -I include/stm32f4
-; -- TFT_eSPI build options ------------------------
- ${lcd.lolin24}
- ;-D TFT_MISO=PB4 ;Default
- ;-D TFT_MOSI=PB5 ;Default
- ;-D TFT_SCLK=PB3 ;Default
- -D TFT_CS=PE13 ;D8
- -D TFT_DC=PE14 ;D3
- -D TFT_BCKL=PA15 ;None, configurable via web UI (e.g. 2 for D4)
- -D TOUCH_CS=PA6 ;NC
- -D TFT_RST=-1 ;D4
- -D HASP_OUTPUT_PIN=PE0 ; User LED D2 on DevEBox board
- -D HASP_INPUT_PIN=PD15 ; User Button K1 on DevEBox board
- -D STM32_SERIAL1 ; Set this option to use Serial1 as default sersial port, leave out if using Serial2
- -D HASP_USE_ETHERNET=1
- -D W5500_MOSI=PB15 ;SPI2 MOSI
- -D W5500_MISO=PB14 ;SPI2 MISO
- -D W5500_SCLK=PB13 ;SPI2 SCLK
- -D W5500_CS=PB6 ;SPI2 CS
- -D W5500_RST=PD1 ;SPI2 CS
- ; -D HAL_ETH_MODULE_ENABLED=1 ; enable ethernet support
- ; -D LAN8742A_PHY_ADDRESS=0x01U ; set LAN8720 PHY address
- -D HASP_USE_TASMOTA_SLAVE=1
- -D W5500_LAN
-
-lib_deps =
- ${env.lib_deps}
- Ticker@^3.1.5
- ; Ethernet
- https://github.com/khoih-prog/EthernetWebServer_STM32.git
- https://github.com/netwizeBE/Ethernet3.git
-
-lib_ignore =
- lv_lib_zifont
-
-src_filter = +<*> -<.git/> -<.svn/> - - - - +
-
-;***************************************************