diff --git a/platformio_override-template.ini b/platformio_override-template.ini
index 8b6271b2..91b1ab50 100644
--- a/platformio_override-template.ini
+++ b/platformio_override-template.ini
@@ -27,6 +27,8 @@ extra_default_envs =
     ; d132-unoshield
     ; nodemcu32s-raspi
     ; esp32dev-ili9488
+    ; lanbon_l8
+    ; wt32-sc01
     ; my_custom_build
 ;endregion
 
diff --git a/user_setups/esp32/wt32-sc01.ini b/user_setups/esp32/wt32-sc01.ini
new file mode 100644
index 00000000..fda64811
--- /dev/null
+++ b/user_setups/esp32/wt32-sc01.ini
@@ -0,0 +1,54 @@
+;***************************************************;
+;          Lanbon L8 Switch with ST7789V TFT 2.4"   ;
+;               - Custom ESP32 pcb                  ;
+;               - ST7789V TFT                       ;
+;               - FT6336U touch controller          ;
+;***************************************************;
+
+[env:sc01]
+platform = espressif32
+platform_packages = framework-arduinoespressif32
+framework = arduino
+board = esp32dev
+;upload_port = COM5      ; To change the port, use platform_override.ini
+;monitor_port = COM5     ; To change the port, use platform_override.ini
+monitor_filters = esp32_exception_decoder
+board_build.partitions = user_setups/esp32_partition_app1300k_spiffs1216k.csv
+
+build_flags =
+    ${env.build_flags}
+    ${esp32.build_flags}
+
+;region -- TFT_eSPI build options ------------------------
+    ${lcd.sc01}
+    -D TFT_RST=22
+    -D TFT_SCLK=14
+    -D TFT_DC=21
+    -D TFT_CS=15
+    -D TFT_MOSI=13
+    -D TFT_MISO=-1
+    -D TFT_BCKL=23
+    ; -D TOUCH_DRIVER=5206
+    ; -D TOUCH_SDA=30 // correct port, commented because touch crashes
+    ; -D TOUCH_SCL=31 // correct port, commented because touch crashes
+    ; -D TOUCH_IRQ=-1   ; not connected
+    ; -D TOUCH_RST=-1   ; not used, connected to 3.3V on FCP pin10
+    ; -D TOUCH_FREQUENCY=400000
+    ; -D USE_TFT_ESPI=1
+;endregion
+
+;region -- Library options -------------------------------
+lib_deps =
+    ${env.lib_deps}
+    ${esp32.lib_deps}
+    ;git+https://github.com/lvgl/lvgl_esp32_drivers.git
+    git+https://github.com/aselectroworks/Arduino-FT6336U.git
+
+lib_ignore =
+    ${env.lib_ignore}
+    ${esp32.lib_ignore}
+;endregion
+
+extra_scripts =
+    ${env.extra_scripts}
+    ${esp32.extra_scripts}
\ No newline at end of file
diff --git a/user_setups/lcd_config.ini b/user_setups/lcd_config.ini
index 10e5aad4..d68b7ced 100644
--- a/user_setups/lcd_config.ini
+++ b/user_setups/lcd_config.ini
@@ -67,14 +67,11 @@ st7789v =
     ;-D TOUCH_DRIVER=6336       ; FT6336U Capacitive I2C touch panel driver
     -D SUPPORT_TRANSACTIONS
 
-wireless-tag =
+sc01 =
     -D ST7796_DRIVER=1
     -D TFT_WIDTH=320
     -D TFT_HEIGHT=480
-    -D TFT_ROTATION=0 ; see TFT_ROTATION values
+    -D TFT_ROTATION=1 ; see TFT_ROTATION values
     -D SPI_FREQUENCY=40000000
-    -D SPI_READ_FREQUENCY=20000000
     -D USER_SETUP_LOADED=1
-    -D TOUCH_DRIVER=6336 ; FT6336U Capacitive I2C touch panel driver
-    -D SUPPORT_TRANSACTIONS
-    -D I2C_TOUCH_FREQUENCY=400000
+    -D SUPPORT_TRANSACTIONS
\ No newline at end of file