diff --git a/user_setups/esp32s3/ttgo-t-display-s3_touch.ini b/user_setups/esp32s3/ttgo-t-display-s3_touch.ini
new file mode 100644
index 00000000..73684e07
--- /dev/null
+++ b/user_setups/esp32s3/ttgo-t-display-s3_touch.ini
@@ -0,0 +1,77 @@
+;***************************************************;
+;        TTGO T-Display-S3 with ST7789              ;
+;             - TTGO T7 S3 v1.1 Mini esp32 s3 board ;
+;             - ST7789  TFT                         ;
+;             - CST816S touch controller            ;
+;***************************************************;
+
+[ttgo-t-display-s3_st7789]
+extends = arduino_esp32s3_v2
+board = lilygo-t-display-s3
+board_build.arduino.memory_type = qio_opi
+
+build_flags =
+    ${env.build_flags}
+    ${esp32s3.build_flags}
+    ${esp32s3.ps_ram}
+    -D HASP_MODEL="TTGO T-Display S3"
+    ;-Wno-macro-redefined
+    -D ARDUINO_USB_MODE=0   ; If USB MODE 1, the device will only boot when a serial port is opened.
+    -D ARDUINO_USB_CDC_ON_BOOT
+	-D USE_USB_CDC_CONSOLE
+
+;region -- TFT_eSPI build options ------------------------
+    -D USER_SETUP_LOADED=1
+    -D ST7789_DRIVER=1
+    -D CGRAM_OFFSET=1        ; Library will add offsets required
+    ; -D TFT_SDA_READ        ; Read from display, it only provides an SDA pin
+    -D TFT_WIDTH=170
+    -D TFT_HEIGHT=320
+    ; -D TFT_ROTATION=2      ; see TFT_ROTATION values
+    ; -D TFT_INVERSION_OFF   ; for normal colors
+    -D TFT_INVERSION_ON
+    -D TFT_RGB_ORDER=0       ; Colour order Blue-Green-Red
+    -D INVERT_COLORS=1       ; for inverted colors
+    -D DISABLE_ALL_LIBRARY_WARNINGS     ; Disable TFTeSPI log warning
+
+    ; -D INIT_SEQUENCE_3 ; Using this initialisation sequence improves the display image
+    -D TFT_PARALLEL_8_BIT
+    -D TFT_DC=7
+    -D TFT_RST=5
+    -D TFT_WR=8
+    -D TFT_RD=9
+    -D TFT_D0=39
+    -D TFT_D1=40
+    -D TFT_D2=41
+    -D TFT_D3=42
+    -D TFT_D4=45
+    -D TFT_D5=46
+    -D TFT_D6=47
+    -D TFT_D7=48
+    -D TFT_BCKL=38
+    ; Touch Settings
+    -D TOUCH_DRIVER=0x816
+    -D TOUCH_SDA=18
+    -D TOUCH_SCL=17
+    -D TOUCH_RST=21
+    -D TOUCH_IRQ=16
+    -D I2C_TOUCH_FREQUENCY=400000
+    -D I2C_TOUCH_ADDRESS=0x15
+    ; End Touch Settings
+;endregion
+
+;region -- Library options -------------------------------
+lib_deps =
+    ${env.lib_deps}
+    ${esp32s3.lib_deps}
+    ${arduino_esp32s3_v2.lib_deps}
+    ${tft_espi.lib_deps}
+
+lib_ignore =
+    ${env.lib_ignore}
+    ${esp32s3.lib_ignore}
+    ${arduino_esp32s3_v2.lib_ignore}
+;endregion
+
+[env:ttgo-t-display-s3_st7789_touch_16MB]
+extends = ttgo-t-display-s3_st7789, flash_16mb
\ No newline at end of file