;***************************************************;
;        Lilygo T-Panel S3, 4-Inch Touch Screen     ; 
;               - Custom esp32-s3 board             ;
;               - st7701s TFT                       ;
;               - CST3240 touch controller (WIP)    ;
;               - IO Expansion: XL9535              ;
;***************************************************;

[lilygo-t-panel]
extends = arduino_esp32s3_v2
board = esp32s3_flash_16MB

; board_build.memory_type = qio_opi ;Enable internal PSRAM
board_build.memory_type = qio_qspi ;Enable external PSRAM

board_upload.flash_size = 16MB 
board_build.partitions = default_16MB.csv 

build_flags =
    -D HASP_MODEL="Lilygo T-Panel v1.2"
    ${arduino_esp32s3_v2.build_flags}
    ${esp32s3.ps_ram}
    -DLILYGO_T_PANEL
    -D LILYGO_T_PANEL=1

    -Wall ;all errors that everybody could agree on
    -Wextra ;somebody agree on
    ; -Werror ;Think of "Warning" as "Error".
    ; -D CORE_DEBUG_LEVEL=1 ;Debug level 0-5
    -D BOARD_HAS_PSRAM ;Enable external PSRAM
    -D ARDUINO_USB_MODE=1
    -D ARDUINO_USB_CDC_ON_BOOT=0 ;1 is to use the USB port as a serial port
    -D ARDUINO_RUNNING_CORE=1       ; Arduino Runs On Core (setup, loop)
    -D ARDUINO_EVENT_RUNNING_CORE=1 ; Events Run On Core

;region -- ArduinoGFX build options ------------------------
    -D HASP_USE_ARDUINOGFX=1
    -D HASP_LV_USE_SW_ROTATE=1
    -D ST7701_DRIVER=1
    -D TFT_WIDTH=480
    -D TFT_HEIGHT=480
    ; Bus Settings
    -D TFT_HSYNC=39
    -D TFT_VSYNC=40
    -D TFT_PCLK=41
    -D TFT_B0=1
    -D TFT_B1=2
    -D TFT_B2=3
    -D TFT_B3=4
    -D TFT_B4=5
    -D TFT_G0=6
    -D TFT_G1=7
    -D TFT_G2=8
    -D TFT_G3=9
    -D TFT_G4=10
    -D TFT_G5=11
    -D TFT_R0=12
    -D TFT_R1=13
    -D TFT_R2=42
    -D TFT_R3=46
    -D TFT_R4=45
    -D TFT_BCKL=14

    ; Touch Settings
    -D TOUCH_MODULES_CST_MUTUAL
    -D TOUCH_DRIVER=0x3240
    -D TOUCH_WIDTH=480
    -D TOUCH_HEIGHT=480
    -D TOUCH_SDA=17
    -D TOUCH_SCL=18
    -D TOUCH_INT=21
    -D TOUCH_RST=-1
    -D TOUCH_CS=-1
    -D TOUCH_IRQ=TOUCH_INT
    -D I2C_TOUCH_FREQUENCY=400000UL
    -D I2C_TOUCH_ADDRESS=0x5A
    ; -D I2C_TOUCH_PORT=

    -D LV_DISP_DEF_REFR_PERIOD=10

;endregion

lib_deps =
    ${arduino_esp32s3_v2.lib_deps}
    git+https://github.com/mmMicky/TouchLib.git
     moononournation/GFX Library for Arduino@1.4.0 
[env:lilygo-t-panel_16MB]
extends = lilygo-t-panel, flash_16mb
; monitor_port = COM8 
; upload_port = COM8