openHASP/user_setups/esp32/yeacreate-nscreen32.ini
2022-03-09 15:52:42 +01:00

70 lines
2.1 KiB
INI

;***************************************************;
; YeaCreate Nscreen32 ;
; - 4" ST7796 TFT 8-biy parallell ;
; - gt911 touch controller ;
;***************************************************;
; untested config
[env:yeacreate-nscreen32]
extends = esp32_16mb
board = esp32dev
build_flags =
${env.build_flags}
${esp32.build_flags}
${esp32.ps_ram}
${esp32.hspi} ; Use HSPI hardware SPI bus
-D HASP_MODEL="YeaCreate Nscreen32"
;region -- TFT_eSPI build options ------------------------
-D USER_SETUP_LOADED=1
;-D LGFX_USE_V1=1
-D ST7796_DRIVER=1
-D ESP32_PARALLEL=1
-D TFT_ROTATION=0 ; 0=0, 1=90, 2=180 or 3=270 degree
-D TFT_WIDTH=320
-D TFT_HEIGHT=480
; ESP32 pins used for the parallel interface TFT
-D TFT_CS=33 ; Chip select control pin
-D TFT_DC=15 ; Data Command control pin - must use a pin in the range 0-31 also named RS
-D TFT_WR=4 ; Write strobe control pin - must use a pin in the range 0-31
-D TFT_RD=2
-D TFT_D0=12 ; Must use pins in the range 0-31 for the data bus
-D TFT_D1=13 ; so a single register write sets/clears all bits
-D TFT_D2=26
-D TFT_D3=25
-D TFT_D4=19
-D TFT_D5=18
-D TFT_D6=27
-D TFT_D7=14
-D TFT_RST=32 ; Reset pin
;-D TFT_BCKL=32 ;None, configurable via web UI (e.g. 2 for D4)
-D SUPPORT_TRANSACTIONS
-D TOUCH_DRIVER=0x0911 ; GT911 Capacitive touch panel driver
-D TOUCH_SDA=21
-D TOUCH_SCL=22
-D TOUCH_IRQ=5
-D TOUCH_RST=23
-D I2C_TOUCH_FREQUENCY=400000
-D SPI_FREQUENCY=40000000
-D SPI_READ_FREQUENCY=20000000
;endregion
; -- Debugging options -----------------------------
; -D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
;region -- Library options -------------------------------
lib_deps =
${env.lib_deps}
${esp32.lib_deps}
bodmer/TFT_eSPI @ 2.4.32
; ${tft_espi.lib_deps}
${goodix.lib_deps}
; https://github.com/lovyan03/LovyanGFX.git#1be6600
lorol/LittleFS_esp32@^1.0.6 ; for v1
lib_ignore =
${env.lib_ignore}
;${esp32.lib_ignore}
; TFT_eSPI
;endregion