diff --git a/.github/ISSUE_TEMPLATE.md b/.github/ISSUE_TEMPLATE.md new file mode 100644 index 000000000..873a76748 --- /dev/null +++ b/.github/ISSUE_TEMPLATE.md @@ -0,0 +1,32 @@ + + +**HassOS release with the issue:** + + +**Supervisor logs:** + + +**Journal logs:** + + +**Kernel logs:** + + +**Description of problem:** diff --git a/Documentation/boards/odroid-c2.md b/Documentation/boards/hardkernel/odroid-c2.md similarity index 100% rename from Documentation/boards/odroid-c2.md rename to Documentation/boards/hardkernel/odroid-c2.md diff --git a/Documentation/boards/hardkernel/odroid-n2.md b/Documentation/boards/hardkernel/odroid-n2.md new file mode 100644 index 000000000..16316d8a0 --- /dev/null +++ b/Documentation/boards/hardkernel/odroid-n2.md @@ -0,0 +1,14 @@ +# Odroid-N2 + +## eMMC + +eMMC support is provided transparently. Just flash the image to the eMMC board as you would an SD card. + +## Console + +By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To show the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the AML0 console if you don't plan on using the serial adapter. +eg. `console=ttyAML0,115200n8 console=tty0` + +## GPIO + +Refer to [the odroid wiki](https://wiki.odroid.com/odroid-n2/hardware/expansion_connectors). diff --git a/Documentation/boards/odroid-xu4.md b/Documentation/boards/hardkernel/odroid-xu4.md similarity index 100% rename from Documentation/boards/odroid-xu4.md rename to Documentation/boards/hardkernel/odroid-xu4.md diff --git a/Documentation/boards/orangepi.md b/Documentation/boards/orangepi.md deleted file mode 100644 index a5f2e82f0..000000000 --- a/Documentation/boards/orangepi.md +++ /dev/null @@ -1,20 +0,0 @@ -# Raspberry PI - -Supported Hardware: - -| Device | Board | -|--------|-----------| -| Orange Pi Prime | opi-prime | - -## Serial console - -The serial port on the Orange Pi Prime is a 3 pin header located between the -power and reset buttons. The pins are labelled away from the board edge. Flow -control must be disabled in order to send data. The serial specs are 3.3V TTL, -115200,8,n,1 - -## I2C - -Add `dtparam=i2c0=on` to `cmdline.txt` - -[config]: ../configuration.md#automatic diff --git a/Documentation/build.md b/Documentation/build.md deleted file mode 100644 index fc66da92d..000000000 --- a/Documentation/build.md +++ /dev/null @@ -1,21 +0,0 @@ -# Building - -Running `sudo ./enter.sh` will get you into the build Docker container. -`make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig` - -## Scripts - - - -## Helpers - -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external xy_defconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external menuconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-menuconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-menuconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-menuconfig` - -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external savedefconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external linux-update-defconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external barebox-update-defconfig` -- `make -C /build/buildroot BR2_EXTERNAL=/build/buildroot-external busybox-update-config` diff --git a/Documentation/configuration.md b/Documentation/configuration.md index 84880db69..06609b785 100644 --- a/Documentation/configuration.md +++ b/Documentation/configuration.md @@ -3,7 +3,7 @@ ## Automatic You can use an USB drive with HassOS to configure network options, SSH access to the host and to install updates. -Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG`. Alternative you can create a `CONFIG` folder inside boot partition. Use the following directory structure within the USB drive: +Format a USB stick with FAT32/EXT4/NTFS and name it `CONFIG` (in all capitals). Alternative you can create a `CONFIG` folder inside boot partition. Use the following directory structure within the USB drive: ```text network/ @@ -23,8 +23,8 @@ hassos-xy.raucb - The `timesyncd.conf` file allow you to set different NTP servers. HassOS won't boot without correct working time servers! - The `hassos-*.raucb` file is a firmware OTA update which will be installed. These can be found on on the [release][hassos-release] page. -You can put this USB stick into the device and it will be read on startup. You can also trigger this process later over the -API/UI or by calling `systemctl restart hassos-config` on the host. +You can put this USB stick into the device and it will be read on startup and files written to the correct places. You can also trigger this process later over the +API/UI or by calling `systemctl restart hassos-config` on the host. *The USB Stick just needs to be insterted to the device during this setup process and can be disconnected afterwards.* ## Local diff --git a/Documentation/kernel.md b/Documentation/kernel.md index fd03de1a9..46bd56e38 100644 --- a/Documentation/kernel.md +++ b/Documentation/kernel.md @@ -1,12 +1,14 @@ # Kernel Version +Default Kernel tree: 5.4 + | Board | Version | |-------|---------| -| Open Virtual Applicance | 4.19.68 | -| Raspberry Pi | 4.19.67 | -| Tinker Board | 4.19.68 | -| Odroid-C2 | 4.19.68 | -| Odroid-XU4 | 4.19.68 | -| Orangepi-Prime | 4.19.68 | -| Intel NUC | 4.19.68 | +| Open Virtual Applicance | 5.4.11 | +| Raspberry Pi | 4.19.93 | +| Tinker Board | 4.19.88 | +| Odroid-C2 | 5.4.11 | +| Odroid-N2 | 5.4.11 | +| Odroid-XU4 | 5.4.11 | +| Intel NUC | 5.4.11 | diff --git a/Documentation/network.md b/Documentation/network.md index 2bfae042a..09f3d3b95 100644 --- a/Documentation/network.md +++ b/Documentation/network.md @@ -1,5 +1,6 @@ # Network +## Configure Network HassOS uses NetworkManager to control the host network. In future releases, you will be able to set up the configuration using the API/UI. Currently only a manual configuration using NetworkManager connection files is supported. Without a configuration file, the device will use DHCP by default. These network connection files can be placed on a USB drive and imported to the host as described in [Configuration][configuration-usb]. ## Configuration Examples @@ -74,10 +75,10 @@ Replace the following configuration: ```ini [ipv4] method=manual -address=192.168.1.111/24,192.168.1.1 +address=192.168.1.111/24;192.168.1.1 dns=8.8.8.8;8.8.4.4; ``` -For address, the value before the comma is the IP address and subnet prefix bitlength; the second value is the IP address of the gateway. +For address, the value before the semicolon is the IP address and subnet prefix bitlength; the second value is the IP address of the gateway. ## Tips diff --git a/azure-pipelines-ci.yml b/azure-pipelines-ci.yml index 85f06f938..6b9c1e0d1 100644 --- a/azure-pipelines-ci.yml +++ b/azure-pipelines-ci.yml @@ -10,9 +10,9 @@ pr: variables: - name: versionHadolint - value: 'v1.16.3' + value: 'v1.17.2' - name: versionShellCheck - value: 'v0.6.0' + value: 'v0.7.0' jobs: diff --git a/azure-pipelines-release.yml b/azure-pipelines-release.yml index 79ca9b74a..51da2e00c 100644 --- a/azure-pipelines-release.yml +++ b/azure-pipelines-release.yml @@ -11,7 +11,7 @@ pr: none variables: - name: versionGHR - value: 'v0.12.1' + value: 'v0.13.0' - group: github - group: hassos @@ -46,10 +46,10 @@ jobs: board: 'intel_nuc' OdroidC2: board: 'odroid_c2' + OdroidN2: + board: 'odroid_n2' OdroidXU4: board: 'odroid_xu4' - OrangePiPrime: - board: 'opi_prime' RaspberryPi: board: 'rpi' RaspberryPi0-W: diff --git a/buildroot-external/Config.in b/buildroot-external/Config.in index eb56fe71b..e57911006 100644 --- a/buildroot-external/Config.in +++ b/buildroot-external/Config.in @@ -4,3 +4,4 @@ source "$BR2_EXTERNAL_HASSOS_PATH/package/apparmor/Config.in" source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-bcm43xx/Config.in" source "$BR2_EXTERNAL_HASSOS_PATH/package/bluetooth-rtl8723/Config.in" source "$BR2_EXTERNAL_HASSOS_PATH/package/hardkernel-boot/Config.in" +source "$BR2_EXTERNAL_HASSOS_PATH/package/qemu-guest-agent/Config.in" diff --git a/buildroot-external/board/asus/tinker/patches/linux/1008-rockchip-dwc2-usb-partial-power-down.patch b/buildroot-external/board/asus/tinker/patches/linux/1008-rockchip-dwc2-usb-partial-power-down.patch deleted file mode 100644 index 0f0f85573..000000000 --- a/buildroot-external/board/asus/tinker/patches/linux/1008-rockchip-dwc2-usb-partial-power-down.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 04fbf78e4e569bf872f1ffcb0a6f9b89569dc913 Mon Sep 17 00:00:00 2001 -From: Hal Emmerich -Date: Thu, 19 Jul 2018 21:48:08 -0500 -Subject: [PATCH] usb: dwc2: disable power_down on rockchip devices - - The bug would let the usb controller enter partial power down, - which was formally known as hibernate, upon boot if nothing was plugged - in to the port. Partial power down couldn't be exited properly, so any - usb devices plugged in after boot would not be usable. - - Before the name change, params.hibernation was false by default, so - _dwc2_hcd_suspend() would skip entering hibernation. With the - rename, _dwc2_hcd_suspend() was changed to use params.power_down - to decide whether or not to enter partial power down. - - Since params.power_down is non-zero by default, it needs to be set - to 0 for rockchip devices to restore functionality. - - This bug was reported in the linux-usb thread: - REGRESSION: usb: dwc2: USB device not seen after boot - - The commit that caused this regression is: - 6d23ee9caa6790aea047f9aca7f3c03cb8d96eb6 - -Signed-off-by: Hal Emmerich ---- - drivers/usb/dwc2/params.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c -index f03e418..492607a 100644 ---- a/drivers/usb/dwc2/params.c -+++ b/drivers/usb/dwc2/params.c -@@ -82,6 +82,7 @@ static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) - p->host_perio_tx_fifo_size = 256; - p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << - GAHBCFG_HBSTLEN_SHIFT; -+ p->power_down = 0; - } - - static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg) --- -2.11.0 - diff --git a/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt b/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt index f306c8bb7..ee744b3f6 100644 --- a/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt +++ b/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt @@ -77,8 +77,8 @@ m_bpp=32 # Allows you to force HDMI thinking that the cable is connected. # true = HDMI will believe that cable is always connected # false = will let board/monitor negotiate the connection status -hpd=true #hpd=false +hpd=true # Monitor output # Controls if HDMI PHY should output anything to the monitor diff --git a/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh b/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh index b85bdc9e3..547bb07d2 100755 --- a/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh +++ b/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh @@ -5,7 +5,7 @@ function hassos_pre_image() { local BOOT_DATA="$(path_boot_dir)" local BL1="${BINARIES_DIR}/bl1.bin.hardkernel" local UBOOT_GXBB="${BINARIES_DIR}/u-boot.gxbb" - local spl_img="$(path_spl_img)" + local SPL_IMG="$(path_spl_img)" cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr" cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/config.txt" @@ -16,9 +16,9 @@ function hassos_pre_image() { # SPL create_spl_image - dd if="${BL1}" of="${spl_img}" conv=notrunc bs=1 count=440 - dd if="${BL1}" of="${spl_img}" conv=notrunc bs=512 skip=1 seek=1 - dd if="${UBOOT_GXBB}" of="${spl_img}" conv=notrunc bs=512 seek=97 + dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=1 count=440 + dd if="${BL1}" of="${SPL_IMG}" conv=notrunc bs=512 skip=1 seek=1 + dd if="${UBOOT_GXBB}" of="${SPL_IMG}" conv=notrunc bs=512 seek=97 } diff --git a/buildroot-external/board/hardkernel/odroid-c2/kernel.config b/buildroot-external/board/hardkernel/odroid-c2/kernel.config index 08fdc1b2f..17263e568 100644 --- a/buildroot-external/board/hardkernel/odroid-c2/kernel.config +++ b/buildroot-external/board/hardkernel/odroid-c2/kernel.config @@ -1,124 +1,286 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 5.4.0 Kernel Configuration +# + +# +# Compiler: gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0 +# +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=70400 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_CAN_LINK=y +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y # # General setup # -# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_COMPILE_TEST is not set +# CONFIG_HEADER_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_BUILD_SALT="" CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_USELIB is not set CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y # # IRQ subsystem # +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_IRQ_MSI_IOMMU=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# end of IRQ subsystem + +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y # # Timers subsystem # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y +# end of Timers subsystem + +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_PREEMPTION=y # # CPU/Task time and stats accounting # +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_SCHED_AVG_IRQ=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_PSI is not set +# end of CPU/Task time and stats accounting + +CONFIG_CPU_ISOLATION=y # # RCU Subsystem # +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +CONFIG_TASKS_RCU=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +# end of RCU Subsystem + CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +# CONFIG_IKHEADERS is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_GENERIC_SCHED_CLOCK=y + +# +# Scheduler features +# +# CONFIG_UCLAMP_TASK is not set +# end of Scheduler features + +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y +CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_RDMA is not set +# CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y -CONFIG_SOCK_CGROUP_DATA=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y +# CONFIG_CHECKPOINT_RESTORE is not set CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y +CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_IO_URING=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +# CONFIG_BPF_SYSCALL is not set +# CONFIG_USERFAULTFD is not set +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +# end of Kernel Performance Events And Counters + +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLAB_MERGE_DEFAULT=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +# CONFIG_SLAB_FREELIST_HARDENED is not set +# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_JUMP_LABEL=y -CONFIG_UPROBES=y +# end of General setup -# -# GCOV-based kernel profiling -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_INTEGRITY=y - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set - -# -# IO Schedulers -# -# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_SMP=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_PROC_KCORE_TEXT=y # # Platform selection # +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_AGILEX is not set # CONFIG_ARCH_SUNXI is not set # CONFIG_ARCH_ALPINE is not set # CONFIG_ARCH_BCM2835 is not set -# CONFIG_ARCH_BCM_IPROC is not set +CONFIG_ARCH_BCM_IPROC=y # CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BITMAIN is not set # CONFIG_ARCH_BRCMSTB is not set # CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set # CONFIG_ARCH_LAYERSCAPE is not set # CONFIG_ARCH_LG1K is not set # CONFIG_ARCH_HISI is not set # CONFIG_ARCH_MEDIATEK is not set CONFIG_ARCH_MESON=y # CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_REALTEK is not set +# CONFIG_ARCH_RENESAS is not set # CONFIG_ARCH_ROCKCHIP is not set # CONFIG_ARCH_SEATTLE is not set -# CONFIG_ARCH_RENESAS is not set # CONFIG_ARCH_STRATIX10 is not set +# CONFIG_ARCH_SYNQUACER is not set # CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_SPRD is not set # CONFIG_ARCH_THUNDER is not set @@ -128,41 +290,7 @@ CONFIG_ARCH_MESON=y # CONFIG_ARCH_XGENE is not set # CONFIG_ARCH_ZX is not set # CONFIG_ARCH_ZYNQMP is not set - -# -# Bus support -# -CONFIG_PCI=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_PCI_IOV=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y - -# -# Cadence PCIe controllers support -# - -# -# DesignWare PCI Core Support -# -# CONFIG_PCI_HISI is not set -# CONFIG_PCIE_KIRIN is not set - -# -# PCI host controller drivers -# -CONFIG_PCI_HOST_GENERIC=y -# CONFIG_PCI_XGENE is not set -# CONFIG_PCI_HOST_THUNDER_PEM is not set -# CONFIG_PCI_HOST_THUNDER_ECAM is not set - -# -# PCI Endpoint -# - -# -# PCI switch controller drivers -# +# end of Platform selection # # Kernel Features @@ -171,50 +299,162 @@ CONFIG_PCI_HOST_GENERIC=y # # ARM errata workarounds via the alternatives framework # -# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set -# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set -# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set -# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set -# CONFIG_HISILICON_ERRATUM_161600802 is not set -# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set +CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_ARM64_ERRATUM_1024718=y +CONFIG_ARM64_ERRATUM_1418040=y +CONFIG_ARM64_ERRATUM_1165522=y +CONFIG_ARM64_ERRATUM_1286807=y +CONFIG_ARM64_ERRATUM_1463225=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23144=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_CAVIUM_ERRATUM_30115=y +CONFIG_CAVIUM_TX2_ERRATUM_219=y +CONFIG_QCOM_FALKOR_ERRATUM_1003=y +CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y +CONFIG_QCOM_FALKOR_ERRATUM_1009=y +CONFIG_QCOM_QDF2400_ERRATUM_0065=y +CONFIG_SOCIONEXT_SYNQUACER_PREITS=y +CONFIG_HISILICON_ERRATUM_161600802=y +CONFIG_QCOM_FALKOR_ERRATUM_E1041=y +CONFIG_FUJITSU_ERRATUM_010001=y +# end of ARM errata workarounds via the alternatives framework + +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +CONFIG_ARM64_PA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=256 +CONFIG_HOTPLUG_CPU=y CONFIG_NUMA=y -CONFIG_PREEMPT=y -CONFIG_KSM=y -CONFIG_MEMORY_FAILURE=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_CMA=y +CONFIG_NODES_SHIFT=2 +CONFIG_USE_PERCPU_NUMA_NODE_ID=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_HOLES_IN_ZONE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y CONFIG_SECCOMP=y CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set CONFIG_KEXEC=y +# CONFIG_KEXEC_FILE is not set CONFIG_CRASH_DUMP=y +CONFIG_XEN_DOM0=y CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDEN_EL2_VECTORS=y +CONFIG_ARM64_SSBD=y +CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +# CONFIG_ARM64_SW_TTBR0_PAN is not set +CONFIG_ARM64_TAGGED_ADDR_ABI=y +CONFIG_COMPAT=y +CONFIG_KUSER_HELPERS=y +# CONFIG_ARMV8_DEPRECATED is not set # # ARMv8.1 architectural features # +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +CONFIG_ARM64_LSE_ATOMICS=y +CONFIG_ARM64_VHE=y +# end of ARMv8.1 architectural features # # ARMv8.2 architectural features # +CONFIG_ARM64_UAO=y +# CONFIG_ARM64_PMEM is not set +CONFIG_ARM64_RAS_EXTN=y +CONFIG_ARM64_CNP=y +# end of ARMv8.2 architectural features + +# +# ARMv8.3 architectural features +# +CONFIG_ARM64_PTR_AUTH=y +# end of ARMv8.3 architectural features + +CONFIG_ARM64_SVE=y +CONFIG_ARM64_MODULE_PLTS=y +# CONFIG_ARM64_PSEUDO_NMI is not set +CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_RANDOMIZE_MODULE_REGION_FULL=y +# end of Kernel Features # # Boot options # +# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y +# end of Boot options -# -# Userspace binary formats -# -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_MISC=y -CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y # # Power management options # +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +# CONFIG_ENERGY_MODEL is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# end of Power management options # # CPU Power Management @@ -227,12 +467,16 @@ CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y # CONFIG_CPU_IDLE_GOV_LADDER is not set CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_IDLE_GOV_TEO is not set CONFIG_DT_IDLE_STATES=y # # ARM CPU Idle Drivers # CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE=y +# end of ARM CPU Idle Drivers +# end of CPU Idle # # CPU Frequency scaling @@ -241,569 +485,684 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y # # CPU frequency scaling drivers # CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_ACPI_CPPC_CPUFREQ=m -CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y +# CONFIG_QORIQ_CPUFREQ is not set +# end of CPU Frequency scaling +# end of CPU Power Management + +# +# Firmware Drivers +# +# CONFIG_ARM_SCMI_PROTOCOL is not set +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ARM_SCPI_POWER_DOMAIN=y +# CONFIG_ARM_SDE_INTERFACE is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +# CONFIG_ISCSI_IBFT is not set +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_HAVE_ARM_SMCCC=y +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_PSCI_CHECKER is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +# CONFIG_EFI_VARS is not set +CONFIG_EFI_ESRT=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +CONFIG_EFI_ARMSTUB_DTB_LOADER=y +CONFIG_EFI_CAPSULE_LOADER=y +# CONFIG_EFI_TEST is not set +# CONFIG_RESET_ATTACK_MITIGATION is not set +# end of EFI (Extensible Firmware Interface) Support + +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_ARM=y +CONFIG_EFI_EARLYCON=y +CONFIG_MESON_SM=y + +# +# Tegra firmware driver +# +# end of Tegra firmware driver +# end of Firmware Drivers + +CONFIG_ARCH_SUPPORTS_ACPI=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_TAD is not set +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y +# CONFIG_ACPI_IPMI is not set +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HED=y +# CONFIG_ACPI_BGRT is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_ACPI_HMAT is not set +CONFIG_HAVE_ACPI_APEI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_SEA=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y +CONFIG_ACPI_GTDT=y +CONFIG_ACPI_PPTT=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y +CONFIG_IRQ_BYPASS_MANAGER=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +CONFIG_KVM_INDIRECT_VECTORS=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA256_ARM64=y +CONFIG_CRYPTO_SHA512_ARM64=m +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m +# CONFIG_CRYPTO_SM4_ARM64_CE is not set +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m +CONFIG_CRYPTO_CHACHA20_NEON=m +# CONFIG_CRYPTO_NHPOLY1305_NEON is not set +CONFIG_CRYPTO_AES_ARM64_BS=m + +# +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_KEEPINITRD=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SET_DIRECT_MAP=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ASM_MODVERSIONS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_STACKLEAK=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_64BIT_TIME=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_REFCOUNT_FULL=y +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y +CONFIG_ARCH_HAS_RELR=y + +# +# GCOV-based kernel profiling +# +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +# end of GCOV-based kernel profiling + +CONFIG_PLUGIN_HOSTCC="" +CONFIG_HAVE_GCC_PLUGINS=y +# end of General architecture-dependent options + +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_ZONED is not set +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +# CONFIG_BLK_WBT is not set +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_CGROUP_IOCOST is not set +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +# end of Partition Types + +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_PM=y + +# +# IO Schedulers +# +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +# CONFIG_IOSCHED_BFQ is not set +# end of IO Schedulers + +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_ASN1=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +# end of Executable file formats + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_FAST_GUP=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_CONTIG_ALLOC=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_ARCH_HAS_PTE_DEVMAP=y +CONFIG_FRAME_VECTOR=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +# end of Memory Management options + CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y -CONFIG_NET_EGRESS=y +CONFIG_NET_INGRESS=y +CONFIG_SKB_EXTENSIONS=y # # Networking options # CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y -CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=m -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=y -# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_UNIX_SCM=y +# CONFIG_UNIX_DIAG is not set +# CONFIG_TLS is not set +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_IP_FIB_TRIE_STATS is not set -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set CONFIG_NET_IP_TUNNEL=m -CONFIG_SYN_COOKIES=y +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set CONFIG_NET_UDP_TUNNEL=m -CONFIG_INET_ESP=y -# CONFIG_INET_ESP_OFFLOAD is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set CONFIG_INET_TUNNEL=m -CONFIG_INET_UDP_DIAG=m -CONFIG_INET_RAW_DIAG=m -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -# CONFIG_TCP_CONG_HYBLA is not set -# CONFIG_TCP_CONG_VEGAS is not set -# CONFIG_TCP_CONG_NV is not set -CONFIG_TCP_CONG_SCALABLE=m -# CONFIG_TCP_CONG_LP is not set -# CONFIG_TCP_CONG_VENO is not set -# CONFIG_TCP_CONG_YEAH is not set -# CONFIG_TCP_CONG_ILLINOIS is not set -# CONFIG_TCP_CONG_DCTCP is not set -# CONFIG_TCP_CONG_CDG is not set -# CONFIG_TCP_CONG_BBR is not set -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_RAW_DIAG is not set +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -# CONFIG_INET6_ESP_OFFLOAD is not set -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_VTI=m +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_IPV6_VTI is not set CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y -CONFIG_NETLABEL=y -CONFIG_NETWORK_SECMARK=y +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m # # Core Netfilter Configuration # -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_FAMILY_ARP=y -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_FAMILY_BRIDGE=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NETFILTER_NETLINK_OSF is not set CONFIG_NF_CONNTRACK=m -CONFIG_NETFILTER_CONNCOUNT=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_LOG_COMMON=m +# CONFIG_NF_LOG_NETDEV is not set +# CONFIG_NF_CONNTRACK_MARK is not set +# CONFIG_NF_CONNTRACK_ZONES is not set +CONFIG_NF_CONNTRACK_PROCFS=y CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=y -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=y -CONFIG_NF_TABLES_NETDEV=y -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m -CONFIG_NFT_RT=m -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_SET_RBTREE=m -CONFIG_NFT_SET_HASH=m -CONFIG_NFT_SET_BITMAP=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_OBJREF=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NFT_FIB=m -CONFIG_NFT_FIB_INET=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -# CONFIG_NFT_FIB_NETDEV is not set -# CONFIG_NF_FLOW_TABLE is not set +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CONNTRACK_LABELS is not set +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_MASQUERADE=y +# CONFIG_NF_TABLES is not set +CONFIG_NETFILTER_XTABLES=m # # Xtables combined modules # -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set # # Xtables targets # -CONFIG_NETFILTER_XT_TARGET_AUDIT=m +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_NAT=m +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_IPMAC=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# end of Core Netfilter Configuration -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -# CONFIG_IP_VS_FO is not set -# CONFIG_IP_VS_OVF is not set -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_SOCKET_IPV4=m -CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_CHAIN_ROUTE_IPV4=m -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NFT_FIB_IPV4=m -CONFIG_NF_TABLES_ARP=y -CONFIG_NF_DUP_IPV4=m -CONFIG_NFT_CHAIN_NAT_IPV4=m -CONFIG_NFT_MASQ_IPV4=m -CONFIG_NFT_REDIR_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m +CONFIG_NF_DEFRAG_IPV4=m +# CONFIG_NF_SOCKET_IPV4 is not set +# CONFIG_NF_TPROXY_IPV4 is not set +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_LOG_ARP is not set +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m +# CONFIG_IP_NF_TARGET_SYNPROXY is not set CONFIG_IP_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set +# end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_NF_SOCKET_IPV6=m -CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NFT_FIB_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m -CONFIG_NFT_MASQ_IPV6=m -CONFIG_NFT_REDIR_IPV6=m +# CONFIG_NF_SOCKET_IPV6 is not set +# CONFIG_NF_TPROXY_IPV6 is not set +# CONFIG_NF_DUP_IPV6 is not set +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m -CONFIG_NF_TABLES_BRIDGE=y -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_INET_SCTP_DIAG=m -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m +# CONFIG_IP6_NF_TARGET_NPT is not set +# end of IPv6: Netfilter Configuration + +CONFIG_NF_DEFRAG_IPV6=m +# CONFIG_NF_CONNTRACK_BRIDGE is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BPFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y -CONFIG_PHONET=y -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -# CONFIG_NET_SCH_CBS is not set -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=y -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -# CONFIG_NET_CLS_FLOWER is not set -# CONFIG_NET_CLS_MATCHALL is not set -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=y -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -# CONFIG_NET_EMATCH_CANID is not set -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=y -CONFIG_NET_ACT_GACT=y -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=y -# CONFIG_NET_ACT_SAMPLE is not set -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -# CONFIG_NET_ACT_VLAN is not set -# CONFIG_NET_ACT_BPF is not set -# CONFIG_NET_ACT_CONNMARK is not set -# CONFIG_NET_ACT_SKBMOD is not set -# CONFIG_NET_ACT_IFE is not set -# CONFIG_NET_ACT_TUNNEL_KEY is not set -CONFIG_NET_CLS_IND=y -CONFIG_NET_SCH_FIFO=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_NET_NSH is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y # # Network testing # -# CONFIG_NET_DROP_MONITOR is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m +# CONFIG_NET_PKTGEN is not set +# end of Network testing +# end of Networking options -# -# CAN Device Drivers -# -# CONFIG_CAN_VCAN is not set -# CONFIG_CAN_VXCAN is not set -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -# CONFIG_CAN_LEDS is not set -# CONFIG_CAN_GRCAN is not set -# CONFIG_CAN_XILINXCAN is not set -# CONFIG_CAN_C_CAN is not set -# CONFIG_CAN_CC770 is not set -# CONFIG_CAN_IFI_CANFD is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_PEAK_PCIEFD is not set -# CONFIG_CAN_SJA1000 is not set -# CONFIG_CAN_SOFTING is not set - -# -# CAN SPI interfaces -# -# CONFIG_CAN_HI311X is not set -# CONFIG_CAN_MCP251X is not set - -# -# CAN USB interfaces -# -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_MCBA_USB=m -# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set CONFIG_BT_HIDP=m # CONFIG_BT_HS is not set # CONFIG_BT_LE is not set CONFIG_BT_LEDS=y -# CONFIG_BT_DEBUGFS is not set # # Bluetooth device drivers @@ -814,138 +1173,432 @@ CONFIG_BT_RTL=m CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set CONFIG_BT_HCIBTUSB_BCM=y +# CONFIG_BT_HCIBTUSB_MTK is not set CONFIG_BT_HCIBTUSB_RTL=y +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_SERDEV=y CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_NOKIA is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_ATH3K=m -CONFIG_FIB_RULES=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_PRIV=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +CONFIG_BT_HCIUART_BCM=y +# CONFIG_BT_HCIUART_RTL is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_ATH3K is not set +# CONFIG_BT_MTKSDIO is not set +# CONFIG_BT_MTKUART is not set +# end of Bluetooth device drivers + +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_CFG80211_WEXT=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set CONFIG_MAC80211=m -CONFIG_MAC80211_MESH=y +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_GPIO is not set CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -# CONFIG_NFC_NCI_SPI is not set -# CONFIG_NFC_NCI_UART is not set -CONFIG_NFC_HCI=m -# CONFIG_NFC_SHDLC is not set - -# -# Near Field Communication (NFC) devices -# -# CONFIG_NFC_TRF7970A is not set -# CONFIG_NFC_SIM is not set -# CONFIG_NFC_PORT100 is not set -# CONFIG_NFC_FDP is not set -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -# CONFIG_NFC_PN533_I2C is not set -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -# CONFIG_NFC_MRVL_I2C is not set -# CONFIG_NFC_ST_NCI_I2C is not set -# CONFIG_NFC_ST_NCI_SPI is not set -# CONFIG_NFC_NXP_NCI is not set -# CONFIG_NFC_S3FWRN5_I2C is not set -# CONFIG_NFC_ST95HF is not set +# CONFIG_NET_9P_XEN is not set +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +# CONFIG_PSAMPLE is not set +# CONFIG_NET_IFE is not set +# CONFIG_LWTUNNEL is not set +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +CONFIG_NET_DEVLINK=y +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=y +CONFIG_HAVE_EBPF_JIT=y # # Device Drivers # +CONFIG_ARM_AMBA=y +CONFIG_HAVE_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEAER_INJECT is not set +# CONFIG_PCIE_ECRC is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_PTM is not set +# CONFIG_PCIE_BW is not set +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_PF_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_LABEL=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# PCI controller drivers +# + +# +# Cadence PCIe controllers support +# +# CONFIG_PCIE_CADENCE_HOST is not set +# end of Cadence PCIe controllers support + +# CONFIG_PCI_FTPCI100 is not set +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +# CONFIG_PCIE_XILINX is not set +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_PLATFORM=y +CONFIG_PCIE_IPROC_MSI=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCI_HOST_THUNDER_PEM=y +CONFIG_PCI_HOST_THUNDER_ECAM=y + +# +# DesignWare PCI Core Support +# +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +# CONFIG_PCIE_DW_PLAT_HOST is not set +CONFIG_PCI_HISI=y +CONFIG_PCIE_KIRIN=y +# CONFIG_PCI_MESON is not set +# CONFIG_PCIE_AL is not set +# end of DesignWare PCI Core Support +# end of PCI controller drivers + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set +# end of PCI Endpoint + +# +# PCI switch controller drivers +# +# CONFIG_PCI_SW_SWITCHTEC is not set +# end of PCI switch controller drivers + +# CONFIG_PCCARD is not set +# CONFIG_RAPIDIO is not set # # Generic Driver Options # -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_UEVENT_HELPER is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y # -# Default contiguous memory area size: +# Firmware loader # +CONFIG_FW_LOADER=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +# CONFIG_FW_LOADER_COMPRESS is not set +# end of Firmware loader + +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_SYS_HYPERVISOR=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set +CONFIG_GENERIC_ARCH_TOPOLOGY=y +# end of Generic Driver Options # # Bus devices # -# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_BRCMSTB_GISB_ARB=y +# CONFIG_MOXTET is not set +CONFIG_SIMPLE_PM_BUS=y CONFIG_VEXPRESS_CONFIG=y -CONFIG_CONNECTOR=m +# end of Bus devices + +# CONFIG_CONNECTOR is not set +# CONFIG_GNSS is not set CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set # # Partition parsers # +# CONFIG_MTD_AR7_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# end of Partition parsers # # User Modules And Translation Layers # +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set # # RAM/ROM/Flash chip drivers # +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# end of RAM/ROM/Flash chip drivers # # Mapping drivers for chip access # +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set +# end of Mapping drivers for chip access # # Self-contained MTD device drivers # -CONFIG_MTD_M25P80=y +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # -CONFIG_MTD_NAND=y +# CONFIG_MTD_DOCG3 is not set +# end of Self-contained MTD device drivers + +CONFIG_MTD_NAND_CORE=y +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set +CONFIG_MTD_RAW_NAND=y +# CONFIG_MTD_NAND_ECC_SW_BCH is not set + +# +# Raw/parallel NAND flash controllers +# +CONFIG_MTD_NAND_DENALI=y +# CONFIG_MTD_NAND_DENALI_PCI is not set CONFIG_MTD_NAND_DENALI_DT=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_BRCMNAND is not set +# CONFIG_MTD_NAND_MXIC is not set +# CONFIG_MTD_NAND_MESON is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_PLATFORM is not set + +# +# Misc +# +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_SPI_NAND is not set # # LPDDR & LPDDR2 PCM memory drivers # +# CONFIG_MTD_LPDDR is not set +# end of LPDDR & LPDDR2 PCM memory drivers + CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_CADENCE_QUADSPI is not set +# CONFIG_SPI_MTK_QUADSPI is not set +# CONFIG_MTD_UBI is not set +# CONFIG_MTD_HYPERBUS is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_KOBJ=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_NUMA=y +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols # -CONFIG_CDROM=m +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set CONFIG_VIRTIO_BLK=y +# CONFIG_VIRTIO_BLK_SCSI is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set # # NVME Support # +CONFIG_NVME_CORE=m CONFIG_BLK_DEV_NVME=m +# CONFIG_NVME_MULTIPATH is not set +# CONFIG_NVME_FC is not set +# CONFIG_NVME_TCP is not set +# CONFIG_NVME_TARGET is not set +# end of NVME Support # # Misc devices # +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set CONFIG_SRAM=y CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_PCI_ENDPOINT_TEST is not set +# CONFIG_XILINX_SDFEC is not set +# CONFIG_PVPANIC is not set +# CONFIG_C2PORT is not set # # EEPROM support # +# CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_AT25=m +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +# CONFIG_EEPROM_EE1004 is not set +# end of EEPROM support + +# CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # +# CONFIG_TI_ST is not set +# end of Texas Instruments shared transport line discipline + +# CONFIG_SENSORS_LIS3_I2C is not set +# CONFIG_ALTERA_STAPL is not set # # Intel MIC & related support @@ -962,6 +1615,7 @@ CONFIG_EEPROM_AT25=m # # VOP Bus Driver # +# CONFIG_VOP_BUS is not set # # Intel MIC Host Driver @@ -982,142 +1636,278 @@ CONFIG_EEPROM_AT25=m # # VOP Driver # +# end of Intel MIC & related support + +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_MISC_ALCOR_PCI is not set +# CONFIG_MISC_RTSX_PCI is not set +# CONFIG_MISC_RTSX_USB is not set +# CONFIG_HABANA_AI is not set +# end of Misc devices # # SCSI device support # -CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m -# CONFIG_SCSI_BNX2X_FCOE is not set -# CONFIG_SCSI_HISI_SAS is not set -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_BFA_FC is not set -# CONFIG_SCSI_CHELSIO_FCOE is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# end of SCSI Transports + +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=y +CONFIG_SCSI_HISI_SAS_PCI=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_SMARTPQI is not set +CONFIG_SCSI_UFSHCD=y +# CONFIG_SCSI_UFSHCD_PCI is not set +CONFIG_SCSI_UFSHCD_PLATFORM=y +# CONFIG_SCSI_UFS_CDNS_PLATFORM is not set +# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set +# CONFIG_SCSI_UFS_BSG is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_MYRB is not set +# CONFIG_SCSI_MYRS is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FDOMAIN_PCI is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_DH is not set +# end of SCSI device support + +CONFIG_HAVE_PATA_PLATFORM=y CONFIG_ATA=y +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y +CONFIG_SATA_MOBILE_LPM_POLICY=0 CONFIG_SATA_AHCI_PLATFORM=y CONFIG_AHCI_CEVA=y -# CONFIG_AHCI_QORIQ is not set +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # +# CONFIG_PATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=m -# CONFIG_DM_MQ_DEFAULT is not set # CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m # CONFIG_DM_UNSTRIPED is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_THIN_PROVISIONING is not set +# CONFIG_DM_CACHE is not set +# CONFIG_DM_WRITECACHE is not set # CONFIG_DM_ERA is not set +# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=m -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m +# CONFIG_DM_LOG_USERSPACE is not set +# CONFIG_DM_RAID is not set CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -# CONFIG_DM_VERITY_FEC is not set -CONFIG_DM_SWITCH=m +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_DUST is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_DM_FLAKEY is not set +# CONFIG_DM_VERITY is not set +# CONFIG_DM_SWITCH is not set # CONFIG_DM_LOG_WRITES is not set # CONFIG_DM_INTEGRITY is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# end of IEEE 1394 (FireWire) support + CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -# CONFIG_IFB is not set -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set CONFIG_MACVLAN=m CONFIG_MACVTAP=m +# CONFIG_IPVLAN is not set CONFIG_VXLAN=m # CONFIG_GENEVE is not set # CONFIG_GTP is not set -CONFIG_NETCONSOLE=y -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set CONFIG_TUN=y +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set CONFIG_VETH=m CONFIG_VIRTIO_NET=y -CONFIG_NLMON=m +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set # # CAIF transport drivers @@ -1126,185 +1916,553 @@ CONFIG_NLMON=m # # Distributed Switch Architecture drivers # +# end of Distributed Switch Architecture drivers + +CONFIG_ETHERNET=y +CONFIG_MDIO=m +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALACRITECH=y +# CONFIG_SLICOSS is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +# CONFIG_ENA_ETHERNET is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set CONFIG_AMD_XGBE=y +CONFIG_NET_VENDOR_AQUANTIA=y +# CONFIG_AQTION is not set +CONFIG_NET_VENDOR_ARC=y +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +CONFIG_ATL1C=m +# CONFIG_ALX is not set +CONFIG_NET_VENDOR_AURORA=y +# CONFIG_AURORA_NB8800 is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_TIGON3 is not set +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +CONFIG_BGMAC=y +CONFIG_BGMAC_PLATFORM=y +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNXT is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CADENCE=y CONFIG_MACB=y -# CONFIG_THUNDER_NIC_PF is not set -# CONFIG_THUNDER_NIC_BGX is not set -# CONFIG_THUNDER_NIC_RGX is not set +CONFIG_MACB_USE_HWSTAMP=y +# CONFIG_MACB_PCI is not set +CONFIG_NET_VENDOR_CAVIUM=y +CONFIG_THUNDER_NIC_PF=y +# CONFIG_THUNDER_NIC_VF is not set +CONFIG_THUNDER_NIC_BGX=y +CONFIG_THUNDER_NIC_RGX=y +# CONFIG_CAVIUM_PTP is not set +# CONFIG_LIQUIDIO is not set +# CONFIG_LIQUIDIO_VF is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +CONFIG_NET_VENDOR_CORTINA=y +# CONFIG_GEMINI_ETHERNET is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_GOOGLE=y +# CONFIG_GVE is not set +CONFIG_NET_VENDOR_HISILICON=y +CONFIG_HIX5HD2_GMAC=y +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y CONFIG_HNS_DSAF=y CONFIG_HNS_ENET=y +CONFIG_HNS3=y +CONFIG_HNS3_HCLGE=y +# CONFIG_HNS3_HCLGEVF is not set +CONFIG_HNS3_ENET=y +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +CONFIG_NET_VENDOR_HUAWEI=y +# CONFIG_HINIC is not set +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set CONFIG_E1000E=y CONFIG_IGB=y +CONFIG_IGB_HWMON=y CONFIG_IGBVF=y -# CONFIG_MVMDIO is not set +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_ICE is not set +# CONFIG_FM10K is not set +# CONFIG_IGC is not set +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_MVMDIO=y +# CONFIG_SKGE is not set CONFIG_SKY2=y -# CONFIG_QCOM_EMAC is not set +# CONFIG_OCTEONTX2_AF is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +CONFIG_MLX4_CORE_GEN2=y +CONFIG_MLX5_CORE=m +# CONFIG_MLX5_FPGA is not set +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +# CONFIG_MLX5_CORE_IPOIB is not set +# CONFIG_MLXSW_CORE is not set +CONFIG_MLXFW=m +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +# CONFIG_LAN743X is not set +CONFIG_NET_VENDOR_MICROSEMI=y +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +CONFIG_NET_VENDOR_NETERION=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_NETRONOME=y +# CONFIG_NFP is not set +CONFIG_NET_VENDOR_NI=y +# CONFIG_NI_XGE_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_NE2K_PCI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_VENDOR_PACKET_ENGINES=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_PENSANDO=y +# CONFIG_IONIC is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_QED is not set +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000_SPI is not set +# CONFIG_QCA7000_UART is not set +CONFIG_QCOM_EMAC=m +# CONFIG_RMNET is not set +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RENESAS=y +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SOLARFLARE=y +# CONFIG_SFC is not set +# CONFIG_SFC_FALCON is not set +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +CONFIG_NET_VENDOR_SMSC=y CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set CONFIG_SMSC911X=y +# CONFIG_SMSC9420 is not set +CONFIG_NET_VENDOR_SOCIONEXT=y +CONFIG_NET_VENDOR_STMICRO=y CONFIG_STMMAC_ETH=m +# CONFIG_STMMAC_SELFTESTS is not set +CONFIG_STMMAC_PLATFORM=m +# CONFIG_DWMAC_DWC_QOS_ETH is not set +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_MESON=m +# CONFIG_STMMAC_PCI is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_DWC_XLGMAC is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_PHY_SEL is not set +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BCM_IPROC is not set +# CONFIG_MDIO_BCM_UNIMAC is not set CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_BCM_IPROC=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +CONFIG_MDIO_BUS_MUX_MESON_G12A=m CONFIG_MDIO_BUS_MUX_MMIOREG=y +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set +CONFIG_MDIO_CAVIUM=y # CONFIG_MDIO_GPIO is not set -# CONFIG_MDIO_THUNDER is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_MSCC_MIIM is not set +# CONFIG_MDIO_OCTEON is not set +CONFIG_MDIO_THUNDER=y +CONFIG_PHYLINK=m +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +# CONFIG_LED_TRIGGER_PHY is not set # # MII PHY device drivers # +# CONFIG_SFP is not set +# CONFIG_ADIN_PHY is not set +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AX88796B_PHY is not set CONFIG_AT803X_PHY=m +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_CORTINA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83822_PHY is not set +# CONFIG_DP83TC811_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m -CONFIG_MESON_GXL_PHY=y +# CONFIG_MESON_GXL_PHY is not set CONFIG_MICREL_PHY=y CONFIG_MICROCHIP_PHY=m -CONFIG_REALTEK_PHY=y -# CONFIG_ROCKCHIP_PHY is not set -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLHC=m -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m +# CONFIG_MICROCHIP_T1_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_NXP_TJA11XX_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_RENESAS_PHY is not set +CONFIG_ROCKCHIP_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=m CONFIG_USB_LAN78XX=m CONFIG_USB_USBNET=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m +# CONFIG_USB_NET_SR9700 is not set CONFIG_USB_NET_SR9800=m CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_CDC_PHONET=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +# CONFIG_USB_NET_AQC111 is not set +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_ADMTEK=y +# CONFIG_ADM8211 is not set CONFIG_ATH_COMMON=m -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -CONFIG_CARL9170_HWRNG=y -CONFIG_ATH6KL=m -# CONFIG_ATH6KL_SDIO is not set -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y +CONFIG_ATH10K_PCI=m +# CONFIG_ATH10K_AHB is not set +# CONFIG_ATH10K_SDIO is not set +# CONFIG_ATH10K_USB is not set +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_WCN36XX is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +# CONFIG_BRCMSMAC is not set CONFIG_BRCMFMAC=m -CONFIG_RT2X00=m -# CONFIG_RT2400PCI is not set -# CONFIG_RT2500PCI is not set -# CONFIG_RT61PCI is not set -# CONFIG_RT2800PCI is not set -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_SDIO=y +# CONFIG_BRCMFMAC_USB is not set +# CONFIG_BRCMFMAC_PCIE is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PRISM54 is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_MWIFIEX=m +# CONFIG_MWIFIEX_SDIO is not set +CONFIG_MWIFIEX_PCIE=m +# CONFIG_MWIFIEX_USB is not set +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +# CONFIG_MT7601U is not set +# CONFIG_MT76x0U is not set +# CONFIG_MT76x0E is not set +# CONFIG_MT76x2E is not set +# CONFIG_MT76x2U is not set +# CONFIG_MT7603E is not set +# CONFIG_MT7615E is not set +CONFIG_WLAN_VENDOR_RALINK=y +# CONFIG_RT2X00 is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_RTL8XXXU is not set +# CONFIG_RTW88 is not set +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set CONFIG_WLCORE_SDIO=m -CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_ZD1211RW is not set +CONFIG_WLAN_VENDOR_QUANTENNA=y +# CONFIG_QTNFMAC_PCIE is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_VIRT_WIFI is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_VMXNET3 is not set +# CONFIG_FUJITSU_ES is not set +CONFIG_NET_FAILOVER=y +# CONFIG_ISDN is not set +# CONFIG_NVM is not set # # Input device support # -CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_SPARSEKMAP is not set +CONFIG_INPUT_MATRIXKMAP=y # # Userland interfaces # +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # +CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ADC=m +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1050 is not set +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_KEYBOARD_CROS_EC=y -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_ZHENHUA is not set -# CONFIG_JOYSTICK_AS5011 is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -# CONFIG_JOYSTICK_PSXPAD_SPI is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_SMBUS=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADC is not set # CONFIG_TOUCHSCREEN_AR1021_I2C is not set -# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set # CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set @@ -1318,6 +2476,7 @@ CONFIG_TOUCHSCREEN_PROPERTIES=y # CONFIG_TOUCHSCREEN_GOODIX is not set # CONFIG_TOUCHSCREEN_HIDEEP is not set # CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_IPROC is not set # CONFIG_TOUCHSCREEN_S6SY761 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_EKTF2127 is not set @@ -1339,25 +2498,7 @@ CONFIG_TOUCHSCREEN_PROPERTIES=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2004 is not set @@ -1375,70 +2516,215 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set -CONFIG_TOUCHSCREEN_DWAV_USB_MT=m -CONFIG_TOUCHSCREEN_SX865X=m +# CONFIG_TOUCHSCREEN_IQS5XX is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MSM_VIBRATOR is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_GPIO_VIBRA is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_AXP20X_PEK is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_RK805_PWRKEY is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +# CONFIG_RMI4_CORE is not set # # Hardware I/O ports # -CONFIG_SERIO_SERPORT=m +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y -CONFIG_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set -# CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_FM801 is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set +# end of Hardware I/O ports +# end of Input device support # # Character devices # +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_NULL_TTY is not set +CONFIG_LDISC_AUTOLOAD=y +CONFIG_DEVMEM=y # # Serial drivers # +CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_ASPEED_VUART is not set CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_DWLIB=y +CONFIG_SERIAL_8250_FSL=y CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_OF_PLATFORM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_AMBA_PL010 is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set CONFIG_SERIAL_MESON=y CONFIG_SERIAL_MESON_CONSOLE=y -CONFIG_CONSOLE_POLL=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_SIFIVE is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +# CONFIG_SERIAL_FSL_LINFLEXUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# end of Serial drivers + +CONFIG_SERIAL_MCTRL_GPIO=y CONFIG_SERIAL_DEV_BUS=y CONFIG_SERIAL_DEV_CTRL_TTYPORT=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +CONFIG_IPMI_PLAT_DATA=y +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +# CONFIG_IPMI_SSIF is not set +# CONFIG_IPMI_WATCHDOG is not set +# CONFIG_IPMI_POWEROFF is not set +# CONFIG_IPMB_DEVICE_INTERFACE is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_IPROC_RNG200=m +# CONFIG_HW_RANDOM_VIRTIO is not set CONFIG_HW_RANDOM_MESON=y CONFIG_HW_RANDOM_CAVIUM=m +CONFIG_HW_RANDOM_OPTEE=m +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y +# CONFIG_TCG_TIS is not set +# CONFIG_TCG_TIS_SPI is not set +# CONFIG_TCG_TIS_I2C_ATMEL is not set +CONFIG_TCG_TIS_I2C_INFINEON=y +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +# CONFIG_TCG_ATMEL is not set +# CONFIG_TCG_INFINEON is not set +# CONFIG_TCG_XEN is not set +# CONFIG_TCG_CRB is not set +# CONFIG_TCG_VTPM_PROXY is not set +# CONFIG_TCG_FTPM_TEE is not set +# CONFIG_TCG_TIS_ST33ZP24_I2C is not set +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set +# end of Character devices -# -# PCMCIA character devices -# +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set # # I2C support # CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y # # Multiplexer I2C Chip support # +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_GPMUX is not set +# CONFIG_I2C_MUX_LTC4306 is not set +# CONFIG_I2C_MUX_PCA9541 is not set CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +# CONFIG_I2C_MUX_MLXCPLD is not set +# end of Multiplexer I2C Chip support + +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support @@ -1447,48 +2733,122 @@ CONFIG_I2C_MUX_PCA954x=y # # PC SMBus host controller drivers # +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_AMD_MP2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_NVIDIA_GPU is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set # # ACPI drivers # +# CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y -CONFIG_I2C_MESON=y -# CONFIG_I2C_RK3X is not set +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_GPIO=m +# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set +# CONFIG_I2C_MESON is not set +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_RK3X=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # -CONFIG_I2C_TINY_USB=m +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # CONFIG_I2C_CROS_EC_TUNNEL=y +# end of I2C Hardware Bus support + +# CONFIG_I2C_STUB is not set CONFIG_I2C_SLAVE=y # CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# end of I2C support + +# CONFIG_I3C is not set CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y # # SPI Master Controller Drivers # -CONFIG_SPI_MESON_SPICC=y -CONFIG_SPI_MESON_SPIFC=y +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +CONFIG_SPI_BCM_QSPI=y +CONFIG_SPI_BITBANG=m +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +CONFIG_SPI_NXP_FLEXSPI=y +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_MESON_SPICC is not set +# CONFIG_SPI_MESON_SPIFC is not set +# CONFIG_SPI_OC_TINY is not set CONFIG_SPI_PL022=y -# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_PXA2XX is not set +CONFIG_SPI_ROCKCHIP=y +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_SIFIVE is not set +# CONFIG_SPI_MXIC is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set # # SPI Protocol Masters # CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set CONFIG_SPMI=y +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set # # PPS clients support # +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support @@ -1497,72 +2857,322 @@ CONFIG_SPMI=y # # PTP clock support # +CONFIG_PTP_1588_CLOCK=y +CONFIG_PTP_1588_CLOCK_DTE=y # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # +# end of PTP clock support + +CONFIG_PINCTRL=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_PINMUX=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_PINCTRL_AXP209 is not set +# CONFIG_PINCTRL_AMD is not set +# CONFIG_PINCTRL_MCP23S08 is not set CONFIG_PINCTRL_SINGLE=y +# CONFIG_PINCTRL_SX150X is not set +# CONFIG_PINCTRL_STMFX is not set CONFIG_PINCTRL_MAX77620=y -CONFIG_GPIO_SYSFS=y +# CONFIG_PINCTRL_RK805 is not set +# CONFIG_PINCTRL_OCELOT is not set +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS2_MUX=y +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_MESON_GXBB=y +CONFIG_PINCTRL_MESON_GXL=y +CONFIG_PINCTRL_MESON8_PMX=y +CONFIG_PINCTRL_MESON_AXG=y +CONFIG_PINCTRL_MESON_AXG_PMX=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers # +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMDPT is not set +# CONFIG_GPIO_CADENCE is not set CONFIG_GPIO_DWAPB=y +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_FTGPIO010 is not set CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_HLWD is not set +CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y -# CONFIG_GPIO_XGENE is not set +# CONFIG_GPIO_SAMA5D2_PIOBU is not set +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_AMD_FCH is not set +# end of Memory mapped GPIO drivers # # I2C GPIO expanders # +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_GW_PLD is not set +# CONFIG_GPIO_MAX7300 is not set +CONFIG_GPIO_MAX732X=y +# CONFIG_GPIO_MAX732X_IRQ is not set CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TPIC2810 is not set +# end of I2C GPIO expanders # # MFD GPIO expanders # +# CONFIG_GPIO_BD9571MWV is not set CONFIG_GPIO_MAX77620=y +# end of MFD GPIO expanders # # PCI GPIO expanders # +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_RDC321X is not set +# end of PCI GPIO expanders # # SPI GPIO expanders # +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set +# end of SPI GPIO expanders # # USB GPIO expanders # -# CONFIG_POWER_RESET_BRCMSTB is not set -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_RESTART=y +# end of USB GPIO expanders + +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_W1 is not set +CONFIG_POWER_AVS=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_BRCMSTB=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set CONFIG_POWER_RESET_VEXPRESS=y -# CONFIG_POWER_RESET_XGENE is not set +CONFIG_POWER_RESET_XGENE=y CONFIG_POWER_RESET_SYSCON=y -CONFIG_POWER_RESET_SYSCON_POWEROFF=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +CONFIG_REBOOT_MODE=y CONFIG_SYSCON_REBOOT_MODE=y +# CONFIG_NVMEM_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_POWER_SUPPLY_HWMON=y +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_LEGO_EV3 is not set +CONFIG_BATTERY_SBS=m +# CONFIG_CHARGER_SBS is not set +# CONFIG_MANAGER_SBS is not set CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set +# CONFIG_AXP20X_POWER is not set +# CONFIG_AXP288_FUEL_GAUGE is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set # CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_LT3651 is not set +# CONFIG_CHARGER_DETECTOR_MAX14656 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +# CONFIG_CHARGER_CROS_USBPD is not set +# CONFIG_CHARGER_UCS1002 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_AS370 is not set +# CONFIG_SENSORS_ASC7621 is not set CONFIG_SENSORS_ARM_SCPI=y +# CONFIG_SENSORS_ASPEED is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IBMAEM is not set +# CONFIG_SENSORS_IBMPEX is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +# CONFIG_SENSORS_OCC_P8_I2C is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +CONFIG_SENSORS_PWM_FAN=m +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_INA3221=m +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83773G is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_XGENE is not set # # ACPI drivers # +# CONFIG_SENSORS_ACPI_POWER is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y -CONFIG_THERMAL_WRITABLE_TRIPS=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set @@ -1573,61 +3183,196 @@ CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y -CONFIG_CLOCK_THERMAL=y -CONFIG_DEVFREQ_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +# CONFIG_DEVFREQ_THERMAL is not set CONFIG_THERMAL_EMULATION=y +# CONFIG_THERMAL_MMIO is not set # CONFIG_MAX77620_THERMAL is not set -# CONFIG_QORIQ_THERMAL is not set +CONFIG_QORIQ_THERMAL=m # -# ACPI INT340X thermal drivers +# Broadcom thermal drivers # -# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +CONFIG_BCM_NS_THERMAL=y +CONFIG_BCM_SR_THERMAL=y +# end of Broadcom thermal drivers + # CONFIG_GENERIC_ADC_THERMAL is not set CONFIG_WATCHDOG=y - -# -# Watchdog Device Drivers -# -CONFIG_MESON_GXBB_WATCHDOG=y -CONFIG_MESON_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# - -# -# USB-based Watchdog Cards -# +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_OPEN_TIMEOUT=0 +# CONFIG_WATCHDOG_SYSFS is not set # # Watchdog Pretimeout Governors # +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +CONFIG_ARM_SP805_WATCHDOG=y +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +CONFIG_DW_WATCHDOG=y +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +CONFIG_MESON_GXBB_WATCHDOG=y +CONFIG_MESON_WATCHDOG=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y +# CONFIG_BCMA is not set # # Multifunction device drivers # -CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_I2C=y -CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +CONFIG_MFD_BD9571MWV=y +CONFIG_MFD_AXP20X=y +CONFIG_MFD_AXP20X_I2C=y +CONFIG_MFD_CROS_EC_DEV=y +# CONFIG_MFD_MADERA is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set CONFIG_MFD_HI6421_PMIC=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77650 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_CPCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RC5T583 is not set CONFIG_MFD_RK808=y +# CONFIG_MFD_RN5T618 is not set CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TPS68470 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TI_LP87565 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TQMX86 is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_LOCHNAGAR is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_ROHM_BD718XX=y +# CONFIG_MFD_ROHM_BD70528 is not set +# CONFIG_MFD_STPMIC1 is not set +# CONFIG_MFD_STMFX is not set CONFIG_MFD_VEXPRESS_SYSREG=y +# CONFIG_RAVE_SP_CORE is not set +# end of Multifunction device drivers + CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_VIRTUAL_CONSUMER=m +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_88PG86X is not set # CONFIG_REGULATOR_ACT8865 is not set # CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_BD718XX=y +CONFIG_REGULATOR_BD9571MWV=y # CONFIG_REGULATOR_DA9210 is not set # CONFIG_REGULATOR_DA9211 is not set CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_HI6421 is not set CONFIG_REGULATOR_HI6421V530=y # CONFIG_REGULATOR_ISL9305 is not set # CONFIG_REGULATOR_ISL6271A is not set @@ -1642,53 +3387,68 @@ CONFIG_REGULATOR_MAX77620=y # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MAX8973=y +# CONFIG_REGULATOR_MCP16502 is not set # CONFIG_REGULATOR_MT6311 is not set -# CONFIG_REGULATOR_PFUZE100 is not set +CONFIG_REGULATOR_PFUZE100=y # CONFIG_REGULATOR_PV88060 is not set # CONFIG_REGULATOR_PV88080 is not set # CONFIG_REGULATOR_PV88090 is not set CONFIG_REGULATOR_PWM=y -# CONFIG_REGULATOR_QCOM_SPMI is not set +CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y # CONFIG_REGULATOR_S2MPA01 is not set CONFIG_REGULATOR_S2MPS11=y # CONFIG_REGULATOR_S5M8767 is not set +# CONFIG_REGULATOR_SLG51000 is not set +# CONFIG_REGULATOR_SY8106A is not set +# CONFIG_REGULATOR_SY8824X is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set # CONFIG_REGULATOR_TPS65132 is not set # CONFIG_REGULATOR_TPS6524X is not set -# CONFIG_REGULATOR_VCTRL is not set +CONFIG_REGULATOR_VCTRL=m # CONFIG_REGULATOR_VEXPRESS is not set -CONFIG_CEC_CORE=y -CONFIG_RC_CORE=y +CONFIG_CEC_CORE=m +CONFIG_RC_CORE=m CONFIG_RC_MAP=m -CONFIG_LIRC=y +# CONFIG_LIRC is not set CONFIG_RC_DECODERS=y -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m +# CONFIG_IR_NEC_DECODER is not set +# CONFIG_IR_RC5_DECODER is not set +# CONFIG_IR_RC6_DECODER is not set +# CONFIG_IR_JVC_DECODER is not set +# CONFIG_IR_SONY_DECODER is not set +# CONFIG_IR_SANYO_DECODER is not set +# CONFIG_IR_SHARP_DECODER is not set +# CONFIG_IR_MCE_KBD_DECODER is not set +# CONFIG_IR_XMP_DECODER is not set +# CONFIG_IR_IMON_DECODER is not set +# CONFIG_IR_RCMM_DECODER is not set CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_IMON=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_MESON=y -CONFIG_IR_REDRAT3=m -# CONFIG_IR_SPI is not set -CONFIG_IR_STREAMZAP=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -# CONFIG_IR_GPIO_TX is not set -# CONFIG_IR_PWM_TX is not set -CONFIG_MEDIA_SUPPORT=y +# CONFIG_RC_ATI_REMOTE is not set +# CONFIG_IR_ENE is not set +# CONFIG_IR_HIX5HD2 is not set +# CONFIG_IR_IMON is not set +# CONFIG_IR_IMON_RAW is not set +# CONFIG_IR_MCEUSB is not set +# CONFIG_IR_ITE_CIR is not set +# CONFIG_IR_FINTEK is not set +# CONFIG_IR_MESON is not set +# CONFIG_IR_NUVOTON is not set +# CONFIG_IR_REDRAT3 is not set +# CONFIG_IR_STREAMZAP is not set +# CONFIG_IR_IGORPLUGUSB is not set +# CONFIG_IR_IGUANA is not set +# CONFIG_IR_TTUSBIR is not set +# CONFIG_RC_LOOPBACK is not set +# CONFIG_IR_GPIO_CIR is not set +# CONFIG_IR_SERIAL is not set +# CONFIG_IR_SIR is not set +# CONFIG_RC_XBOX_DVD is not set +CONFIG_MEDIA_SUPPORT=m # # Multimedia core support @@ -1696,24 +3456,25 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -CONFIG_MEDIA_CEC_RC=y +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_CEC_SUPPORT is not set +# CONFIG_MEDIA_CEC_RC is not set CONFIG_MEDIA_CONTROLLER=y -CONFIG_VIDEO_DEV=y +# CONFIG_MEDIA_CONTROLLER_DVB is not set +CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=y -CONFIG_V4L2_FWNODE=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_V4L2=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_I2C=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_DVB_CORE=m +# CONFIG_DVB_MMAP is not set +# CONFIG_DVB_NET is not set +CONFIG_DVB_MAX_ADAPTERS=16 +# CONFIG_DVB_DYNAMIC_MINORS is not set +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_ULE_DEBUG is not set # # Media drivers @@ -1726,194 +3487,131 @@ CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set # CONFIG_USB_GSPCA_DTCS033 is not set -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_VIDEO_USBTV is not set # # Analog TV USB devices # -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_HDPVR is not set -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_VIDEO_STK1160_COMMON is not set +# CONFIG_VIDEO_GO7007 is not set # # Analog/digital TV USB devices # -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -# CONFIG_VIDEO_AU0828_RC is not set -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_TM6000 is not set # # Digital TV USB devices # -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_FRIIO=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_USB_ZD1301=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m +# CONFIG_DVB_USB is not set +# CONFIG_DVB_USB_V2 is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_SMS_USB_DRV is not set +# CONFIG_DVB_B2C2_FLEXCOP_USB is not set +# CONFIG_DVB_AS102 is not set # # Webcam, TV (analog/digital) USB devices # -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# USB HDMI CEC adapters -# -CONFIG_USB_PULSE8_CEC=m -CONFIG_USB_RAINSHADOW_CEC=m +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_CADENCE is not set +# CONFIG_VIDEO_ASPEED is not set +# CONFIG_VIDEO_MUX is not set +# CONFIG_VIDEO_XILINX is not set CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_AML_MESON_VDEC=y -CONFIG_VIDEO_MESON_VDEC=y -CONFIG_CEC_PLATFORM_DRIVERS=y -CONFIG_VIDEO_MESON_AO_CEC=m +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set # # Supported MMC/SDIO adapters # -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_CYPRESS_FIRMWARE is not set +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m # # Media ancillary drivers (tuners, sensors, i2c, spi, frontends) # +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# I2C drivers hidden by 'Autoselect ancillary drivers' +# # # Audio decoders, processors and mixers # -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_SONY_BTF_MPX=m # # RDS decoders @@ -1922,16 +3620,10 @@ CONFIG_VIDEO_SONY_BTF_MPX=m # # Video decoders # -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m # # Video and audio decoders # -CONFIG_VIDEO_CX25840=m # # Video encoders @@ -1940,9 +3632,10 @@ CONFIG_VIDEO_CX25840=m # # Camera sensor devices # -CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m -CONFIG_VIDEO_MT9V011=m + +# +# Lens drivers +# # # Flash devices @@ -1965,152 +3658,78 @@ CONFIG_VIDEO_MT9V011=m # # -# Sensors used on soc_camera driver +# SPI drivers hidden by 'Autoselect ancillary drivers' +# + +# +# Media SPI Adapters +# +# CONFIG_CXD2880_SPI_DRV is not set +# end of Media SPI Adapters + +CONFIG_MEDIA_TUNER=m + +# +# Tuner drivers hidden by 'Autoselect ancillary drivers' +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MC44S803=m + +# +# DVB Frontend drivers hidden by 'Autoselect ancillary drivers' # -CONFIG_MEDIA_TUNER_TDA18250=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m # # Multistandard (satellite) frontends # -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_M88DS3103=m # # Multistandard (cable + terrestrial) frontends # -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m # # DVB-S (satellite) frontends # -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_TDA10071=m # # DVB-T (terrestrial) frontends # -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_ZD1301_DEMOD=m -CONFIG_DVB_GP8PSK_FE=m # # DVB-C (cable) frontends # -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # -CONFIG_DVB_NXT200X=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m # # ISDB-T (terrestrial) frontends # -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m # # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # -CONFIG_DVB_TC90522=m # # Digital terrestrial only tuners/PLL # -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S # -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_SP2=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m + +# +# Common Interface (EN50221) controller drivers +# # # Tools to develop new frontends @@ -2119,83 +3738,373 @@ CONFIG_DVB_AF9033=m # # Graphics support # -CONFIG_DRM=y -# CONFIG_DRM_DEBUG_MM is not set -CONFIG_DRM_KMS_HELPER=y +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_DRM=m +CONFIG_DRM_MIPI_DSI=y +# CONFIG_DRM_DP_AUX_CHARDEV is not set +CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_KMS_FB_HELPER=y CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_FBDEV_OVERALLOC=200 +CONFIG_DRM_FBDEV_OVERALLOC=100 +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +# CONFIG_DRM_DP_CEC is not set +CONFIG_DRM_TTM=m +CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y +CONFIG_DRM_GEM_SHMEM_HELPER=y +CONFIG_DRM_VM=y +CONFIG_DRM_SCHED=m # # I2C encoder or helper chips # -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +CONFIG_DRM_I2C_NXP_TDA998X=m +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +# end of I2C encoder or helper chips + +# +# ARM devices +# +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_KOMEDA is not set +# end of ARM devices + +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_AMDGPU is not set # # ACP (Audio CoProcessor) Configuration # +# end of ACP (Audio CoProcessor) Configuration -# -# AMD Library routines -# # CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_VKMS is not set +CONFIG_DRM_ATI_PCIGART=y +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_RCAR_DW_HDMI is not set +CONFIG_DRM_RCAR_LVDS=m +CONFIG_DRM_RCAR_WRITEBACK=y +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_VIRTIO_GPU is not set +CONFIG_DRM_PANEL=y # # Display Panels # +# CONFIG_DRM_PANEL_ARM_VERSATILE is not set +# CONFIG_DRM_PANEL_LVDS is not set CONFIG_DRM_PANEL_SIMPLE=m +# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set +# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set +# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set +# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set +# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set +# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set +# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set +# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set +# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set +# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DRM_PANEL_TPO_TPG110 is not set +# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set +# end of Display Panels + +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_CDNS_DSI is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +# CONFIG_DRM_LVDS_ENCODER is not set +# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SIL_SII8620 is not set +CONFIG_DRM_SII902X=m +# CONFIG_DRM_SII9234 is not set +# CONFIG_DRM_THINE_THC63LVD1024 is not set +# CONFIG_DRM_TOSHIBA_TC358764 is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +# CONFIG_DRM_TI_TFP410 is not set +# CONFIG_DRM_TI_SN65DSI86 is not set CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_DW_HDMI=y -CONFIG_DRM_DW_HDMI_I2S_AUDIO=y -CONFIG_DRM_DW_HDMI_CEC=m -# CONFIG_DRM_HISI_HIBMC is not set -# CONFIG_DRM_HISI_KIRIN is not set -CONFIG_DRM_MESON=y -CONFIG_DRM_MESON_DW_HDMI=y +# CONFIG_DRM_I2C_ADV7511_AUDIO is not set +CONFIG_DRM_I2C_ADV7533=y +CONFIG_DRM_I2C_ADV7511_CEC=y +CONFIG_DRM_DW_HDMI=m +# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m +# CONFIG_DRM_DW_HDMI_CEC is not set +# end of Display Interface Bridges + +CONFIG_DRM_ETNAVIV=m +CONFIG_DRM_ETNAVIV_THERMAL=y +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_HIBMC=m +CONFIG_DRM_HISI_KIRIN=m +# CONFIG_DRM_MXSFB is not set +CONFIG_DRM_MESON=m +CONFIG_DRM_MESON_DW_HDMI=m +# CONFIG_DRM_GM12U320 is not set +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set +CONFIG_DRM_PL111=m +# CONFIG_DRM_XEN is not set +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m +CONFIG_DRM_LEGACY=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y # # Frame buffer Devices # +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set # # Frame buffer hardware drivers # -CONFIG_FB_ARMCLCD=y -# CONFIG_FB_UVESA is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_EFI=y +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_XEN_FBDEV_FRONTEND=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SM712 is not set +# end of Frame buffer Devices + +# +# Backlight & LCD device support +# +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=m CONFIG_BACKLIGHT_PWM=m +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +# end of Backlight & LCD device support + +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y # # Console display driver support # +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +# end of Console display driver support + CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# end of Graphics support + CONFIG_SOUND=y CONFIG_SND=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_VMASTER=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +# CONFIG_SND_OSSEMUL is not set +CONFIG_SND_PCM_TIMER=y +# CONFIG_SND_HRTIMER is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set # # HD-Audio # -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m +# CONFIG_SND_HDA_INTEL is not set +# end of HD-Audio + +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_VARIAX is not set CONFIG_SND_SOC=y +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set # # SoC Audio for Freescale CPUs @@ -2204,92 +4113,366 @@ CONFIG_SND_SOC=y # # Common SoC Audio options for Freescale CPUs: # -CONFIG_SND_SOC_MESON=y -CONFIG_SND_SOC_MESON_I2S=y +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_AUDMIX is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# end of SoC Audio for Freescale CPUs + +# CONFIG_SND_I2S_HI6210_I2S is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_MTK_BTCVSD is not set + +# +# ASoC support for Amlogic platforms +# +# CONFIG_SND_MESON_AXG_FRDDR is not set +# CONFIG_SND_MESON_AXG_TODDR is not set +# CONFIG_SND_MESON_AXG_TDMIN is not set +# CONFIG_SND_MESON_AXG_TDMOUT is not set +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set +# CONFIG_SND_MESON_AXG_SPDIFOUT is not set +# CONFIG_SND_MESON_AXG_SPDIFIN is not set +# CONFIG_SND_MESON_AXG_PDM is not set +# CONFIG_SND_MESON_G12A_TOHDMITX is not set +# end of ASoC support for Amlogic platforms + +# CONFIG_SND_SOC_SOF_TOPLEVEL is not set # # STMicroelectronics STM32 SOC audio support # +# end of STMicroelectronics STM32 SOC audio support + +# CONFIG_SND_SOC_XILINX_I2S is not set +# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set +# CONFIG_SND_SOC_XILINX_SPDIF is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +# CONFIG_ZX_TDM is not set +CONFIG_SND_SOC_I2C_AND_SPI=y # # CODEC drivers # +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU1761_I2C is not set +# CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4118 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set CONFIG_SND_SOC_AK4613=m -CONFIG_SND_SOC_DIO2125=m -CONFIG_SND_SOC_HDMI_CODEC=y +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_AK5558 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BD28623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CROS_EC_CODEC is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS35L34 is not set +# CONFIG_SND_SOC_CS35L35 is not set +# CONFIG_SND_SOC_CS35L36 is not set +# CONFIG_SND_SOC_CS42L42 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS43130 is not set +# CONFIG_SND_SOC_CS4341 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +# CONFIG_SND_SOC_CX2072X is not set +CONFIG_SND_SOC_DMIC=m +CONFIG_SND_SOC_HDMI_CODEC=m CONFIG_SND_SOC_ES7134=m -CONFIG_SND_SOC_PCM512x=m -CONFIG_SND_SOC_PCM512x_I2C=m +CONFIG_SND_SOC_ES7241=m +# CONFIG_SND_SOC_ES8316 is not set +# CONFIG_SND_SOC_ES8328_I2C is not set +# CONFIG_SND_SOC_ES8328_SPI is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_MAX98088 is not set +CONFIG_SND_SOC_MAX98357A=m +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9867 is not set +# CONFIG_SND_SOC_MAX98927 is not set +# CONFIG_SND_SOC_MAX98373 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1789_I2C is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM186X_I2C is not set +# CONFIG_SND_SOC_PCM186X_SPI is not set +# CONFIG_SND_SOC_PCM3060_I2C is not set +# CONFIG_SND_SOC_PCM3060_SPI is not set +CONFIG_SND_SOC_PCM3168A=m +CONFIG_SND_SOC_PCM3168A_I2C=m +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RK3328 is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set CONFIG_SND_SOC_SPDIF=m -CONFIG_SND_SIMPLE_CARD=y -CONFIG_SND_SIMPLE_SCU_CARD=m +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +CONFIG_SND_SOC_TAS571X=m +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TAS6424 is not set +# CONFIG_SND_SOC_TDA7419 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_TSCS42XX is not set +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_UDA1334 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8524 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +# CONFIG_SND_SOC_MAX9759 is not set +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_MT6358 is not set +# CONFIG_SND_SOC_NAU8540 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_NAU8824 is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +# end of CODEC drivers + +CONFIG_SND_SIMPLE_CARD_UTILS=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD=m +# CONFIG_SND_XEN_FRONTEND is not set # # HID support # +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y # # Special HID drivers # CONFIG_HID_A4TECH=y +# CONFIG_HID_ACCUTOUCH is not set +# CONFIG_HID_ACRUX is not set CONFIG_HID_APPLE=y -CONFIG_HID_APPLEIR=m +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_ASUS is not set +# CONFIG_HID_AUREAL is not set CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +# CONFIG_HID_BIGBEN_FF is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_COUGAR is not set +# CONFIG_HID_MACALLY is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CREATIVE_SB0540 is not set CONFIG_HID_CYPRESS=y -CONFIG_HID_ELO=m +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELAN is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set CONFIG_HID_EZKEY=y -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_UCLOGIC=m +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_VIEWSONIC is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +CONFIG_HID_ITE=y +# CONFIG_HID_JABRA is not set +# CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set CONFIG_HID_LOGITECH=y # CONFIG_HID_LOGITECH_HIDPP is not set # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MALTRON is not set +# CONFIG_HID_MAYFLASH is not set +CONFIG_HID_REDRAGON=y CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y -CONFIG_HID_NTRIG=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_WACOM=m +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTI is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_RETRODE is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEAM is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_UDRAW_PS3 is not set +# CONFIG_HID_U2FZERO is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set +# end of Special HID drivers # # USB HID support # -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set +# end of USB HID support # # I2C HID support # +CONFIG_I2C_HID=m +# end of I2C HID support +# end of HID support + +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +# CONFIG_USB_LED_TRIG is not set +CONFIG_USB_ULPI_BUS=y +# CONFIG_USB_CONN_GPIO is not set +CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y +CONFIG_USB_PCI=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_OTG=y -CONFIG_USB_MON=m +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +CONFIG_USB_AUTOSUSPEND_DELAY=2 +# CONFIG_USB_MON is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_DBGCAP is not set +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +# CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may @@ -2299,19 +4482,33 @@ CONFIG_USB_WDM=m # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y -CONFIG_USB_UAS=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +CONFIG_USB_UAS=y # # USB Imaging devices # -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_VHCI_HC_PORTS=8 -CONFIG_USBIP_VHCI_NR_HCS=1 -CONFIG_USBIP_HOST=m -# CONFIG_USBIP_VUDC is not set -# CONFIG_USBIP_DEBUG is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_CDNS3 is not set CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +CONFIG_USB_MUSB_DUAL_ROLE=y # # Platform Glue Layer @@ -2320,456 +4517,499 @@ CONFIG_USB_MUSB_HDRC=y # # MUSB DMA mode # +# CONFIG_MUSB_PIO_ONLY is not set CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_ULPI is not set +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y # # Platform Glue Driver Support # +CONFIG_USB_DWC3_PCI=y +CONFIG_USB_DWC3_HAPS=y +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_DWC3_OF_SIMPLE=y CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_HOST is not set # # Gadget/Dual-role mode requires USB Gadget support to be enabled # +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_DUAL_ROLE=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_PCI=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_USB_CHIPIDEA_ULPI=y CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1761_UDC=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set +# CONFIG_USB_ISP1760_GADGET_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y # # USB port drivers # -CONFIG_USB_SERIAL=y -# CONFIG_USB_SERIAL_CONSOLE is not set -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_F8153X=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_UPD78F0730=m -# CONFIG_USB_SERIAL_DEBUG is not set +# CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +# CONFIG_USB_HUB_USB251XB is not set CONFIG_USB_HSIC_USB3503=y +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set # # USB Physical Layer drivers # +CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +# end of USB Physical Layer drivers + CONFIG_USB_GADGET=y -# CONFIG_U_SERIAL_CONSOLE is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # # USB Peripheral Controller # -# CONFIG_USB_SNP_UDC_PLAT is not set -# CONFIG_USB_BDC_UDC is not set -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_F_SS_LB=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_U_AUDIO=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_NCM=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_PHONET=m -CONFIG_USB_F_EEM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -CONFIG_USB_F_FS=m -CONFIG_USB_F_UAC1=m -CONFIG_USB_F_UVC=m -CONFIG_USB_F_MIDI=m -CONFIG_USB_F_HID=m -CONFIG_USB_F_PRINTER=m -CONFIG_USB_CONFIGFS=m -CONFIG_USB_CONFIGFS_SERIAL=y -CONFIG_USB_CONFIGFS_ACM=y -CONFIG_USB_CONFIGFS_OBEX=y -CONFIG_USB_CONFIGFS_NCM=y -CONFIG_USB_CONFIGFS_ECM=y -CONFIG_USB_CONFIGFS_ECM_SUBSET=y -CONFIG_USB_CONFIGFS_RNDIS=y -CONFIG_USB_CONFIGFS_EEM=y -CONFIG_USB_CONFIGFS_PHONET=y -CONFIG_USB_CONFIGFS_MASS_STORAGE=y -CONFIG_USB_CONFIGFS_F_LB_SS=y -CONFIG_USB_CONFIGFS_F_FS=y -# CONFIG_USB_CONFIGFS_F_UAC1 is not set -# CONFIG_USB_CONFIGFS_F_UAC1_LEGACY is not set -# CONFIG_USB_CONFIGFS_F_UAC2 is not set -# CONFIG_USB_CONFIGFS_F_MIDI is not set -# CONFIG_USB_CONFIGFS_F_HID is not set -# CONFIG_USB_CONFIGFS_F_UVC is not set -# CONFIG_USB_CONFIGFS_F_PRINTER is not set -CONFIG_USB_ZERO=m -# CONFIG_USB_ZERO_HNPTEST is not set -CONFIG_USB_AUDIO=m -CONFIG_GADGET_UAC1=y -# CONFIG_GADGET_UAC1_LEGACY is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_ETH_EEM=y -CONFIG_USB_G_NCM=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FUNCTIONFS=m -CONFIG_USB_FUNCTIONFS_ETH=y -CONFIG_USB_FUNCTIONFS_RNDIS=y -# CONFIG_USB_FUNCTIONFS_GENERIC is not set -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m -CONFIG_USB_G_NOKIA=m -CONFIG_USB_G_ACM_MS=m -CONFIG_USB_G_MULTI=m -CONFIG_USB_G_MULTI_RNDIS=y -# CONFIG_USB_G_MULTI_CDC is not set -CONFIG_USB_G_HID=m -# CONFIG_USB_G_DBGP is not set -CONFIG_USB_G_WEBCAM=m -CONFIG_USB_ULPI_BUS=y +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +CONFIG_USB_SNP_CORE=y +CONFIG_USB_SNP_UDC_PLAT=y +# CONFIG_USB_M66592 is not set +CONFIG_USB_BDC_UDC=y + +# +# Platform Support +# +CONFIG_USB_BDC_PCI=y +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +# end of USB Peripheral Controller + +# CONFIG_USB_CONFIGFS is not set +CONFIG_TYPEC=m +# CONFIG_TYPEC_TCPM is not set +# CONFIG_TYPEC_UCSI is not set +# CONFIG_TYPEC_TPS6598X is not set + +# +# USB Type-C Multiplexer/DeMultiplexer Switch support +# +# CONFIG_TYPEC_MUX_PI3USB30532 is not set +# end of USB Type-C Multiplexer/DeMultiplexer Switch support + +# +# USB Type-C Alternate Mode drivers +# +# CONFIG_TYPEC_DP_ALTMODE is not set +# end of USB Type-C Alternate Mode drivers + +CONFIG_USB_ROLE_SWITCH=y CONFIG_MMC=y +CONFIG_PWRSEQ_EMMC=y +# CONFIG_PWRSEQ_SD8787 is not set +CONFIG_PWRSEQ_SIMPLE=y +CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=32 +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_DEBUG is not set CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_STM32_SDMMC=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set CONFIG_MMC_SDHCI_ACPI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y +# CONFIG_MMC_SDHCI_OF_ASPEED is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_MMC_SDHCI_F_SDH30=y +CONFIG_MMC_SDHCI_IPROC=y CONFIG_MMC_MESON_GX=y +# CONFIG_MMC_MESON_MX_SDIO is not set +# CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set CONFIG_MMC_DW=y -# CONFIG_MMC_DW_EXYNOS is not set +CONFIG_MMC_DW_PLTFM=y +# CONFIG_MMC_DW_BLUEFIELD is not set +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_HI3798CV200=y CONFIG_MMC_DW_K3=y +# CONFIG_MMC_DW_PCI is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_CQHCI=y +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set CONFIG_MMC_SDHCI_XENON=y +# CONFIG_MMC_SDHCI_OMAP is not set +# CONFIG_MMC_SDHCI_AM654 is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set # # LED drivers # +# CONFIG_LEDS_AN30259A is not set +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_CR0014114 is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3532 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set CONFIG_LEDS_PWM=y # CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # +# CONFIG_LEDS_BLINKM is not set CONFIG_LEDS_SYSCON=y +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_USER is not set +# CONFIG_LEDS_SPI_BYTE is not set +# CONFIG_LEDS_TI_LMU_COMMON is not set # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_ONESHOT is not set CONFIG_LEDS_TRIGGER_DISK=y +# CONFIG_LEDS_TRIGGER_MTD is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set CONFIG_LEDS_TRIGGER_PANIC=y +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_LEDS_TRIGGER_PATTERN is not set +# CONFIG_LEDS_TRIGGER_AUDIO is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_GHES=y +# CONFIG_EDAC_THUNDERX is not set +# CONFIG_EDAC_XGENE is not set +CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y # # RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABEOZ9 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_MESON_VRTC=m CONFIG_RTC_DRV_RK808=m +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_ISL12026 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF85363 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8010 is not set +CONFIG_RTC_DRV_RX8581=m +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_RV8803 is not set CONFIG_RTC_DRV_S5M=y +# CONFIG_RTC_DRV_SD3078 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y # # SPI and I2C RTC drivers # CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_DS3232_HWMON=y +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set CONFIG_RTC_DRV_EFI=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_ZYNQMP is not set +CONFIG_RTC_DRV_CROS_EC=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PL030 is not set CONFIG_RTC_DRV_PL031=y +# CONFIG_RTC_DRV_CADENCE is not set +# CONFIG_RTC_DRV_FTRTC010 is not set +CONFIG_RTC_DRV_SNVS=m +# CONFIG_RTC_DRV_R7301 is not set # # HID Sensor RTC drivers # CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_ALTERA_MSGDMA is not set +# CONFIG_AMBA_PL08X is not set CONFIG_BCM_SBA_RAID=m +# CONFIG_DW_AXI_DMAC is not set +CONFIG_FSL_EDMA=y +# CONFIG_FSL_QDMA is not set +# CONFIG_INTEL_IDMA64 is not set CONFIG_MV_XOR_V2=y CONFIG_PL330_DMA=y -# CONFIG_QCOM_HIDMA_MGMT is not set -# CONFIG_QCOM_HIDMA is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +# CONFIG_DW_EDMA is not set +# CONFIG_DW_EDMA_PCIE is not set # # DMA Clients # +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +CONFIG_DMA_ENGINE_RAID=y # # DMABUF options # +CONFIG_SYNC_FILE=y +# CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set +# end of DMABUF options + +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +CONFIG_VFIO_IOMMU_TYPE1=y +CONFIG_VFIO_VIRQFD=y CONFIG_VFIO=y +# CONFIG_VFIO_NOIOMMU is not set CONFIG_VFIO_PCI=y +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PLATFORM is not set +# CONFIG_VFIO_MDEV is not set +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y +CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_INPUT is not set CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set # # Microsoft Hyper-V guest support # +# end of Microsoft Hyper-V guest support # # Xen driver support # +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y +CONFIG_XEN_DEV_EVTCHN=y +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=y CONFIG_XEN_GRANT_DEV_ALLOC=y -CONFIG_STAGING=y -# CONFIG_IRDA is not set -# CONFIG_IPX is not set -# CONFIG_NCP_FS is not set -CONFIG_PRISM2_USB=m -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -# CONFIG_RTL8723BS is not set -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -# CONFIG_R8822BE is not set -# CONFIG_RTS5208 is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set +# CONFIG_XEN_GRANT_DMA_ALLOC is not set +CONFIG_SWIOTLB_XEN=y +# CONFIG_XEN_PVCALLS_FRONTEND is not set +# CONFIG_XEN_PVCALLS_BACKEND is not set +CONFIG_XEN_PRIVCMD=y +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +# end of Xen driver support -# -# IIO staging drivers -# - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADIS16240 is not set - -# -# Analog to digital converters -# -# CONFIG_AD7606 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7816 is not set -# CONFIG_AD7192 is not set -# CONFIG_AD7280 is not set - -# -# Analog digital bi-direction converters -# -# CONFIG_ADT7316 is not set - -# -# Capacitance to digital converters -# -# CONFIG_AD7150 is not set -# CONFIG_AD7152 is not set -# CONFIG_AD7746 is not set - -# -# Direct Digital Synthesis -# -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16060 is not set - -# -# Network Analyzer, Impedance Converters -# -# CONFIG_AD5933 is not set - -# -# Light sensors -# -# CONFIG_TSL2x7x is not set - -# -# Active energy metering IC -# -# CONFIG_ADE7753 is not set -# CONFIG_ADE7754 is not set -# CONFIG_ADE7758 is not set -# CONFIG_ADE7759 is not set -# CONFIG_ADE7854 is not set - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# CONFIG_AD2S1210 is not set - -# -# Triggers - standalone -# -# CONFIG_FB_SM750 is not set -# CONFIG_FB_XGI is not set - -# -# Speakup console speech -# -# CONFIG_SPEAKUP is not set -CONFIG_STAGING_MEDIA=y -# CONFIG_DVB_CXD2099 is not set - -# -# Android -# -# CONFIG_STAGING_BOARD is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_MTD_SPINAND_MT29F is not set -# CONFIG_LNET is not set -# CONFIG_DGNC is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_UNISYSSPAR is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -CONFIG_FB_TFT_SH1106=m -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m -# CONFIG_WILC1000_SDIO is not set -# CONFIG_WILC1000_SPI is not set -# CONFIG_MOST is not set -# CONFIG_KS7010 is not set # CONFIG_GREYBUS is not set -# CONFIG_CRYPTO_DEV_CCREE is not set - -# -# USB Power Delivery and Type-C drivers -# -# CONFIG_PI433 is not set +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_MFD_CROS_EC=y +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CHROMEOS_TBMC is not set +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +# CONFIG_CROS_EC_RPMSG is not set +CONFIG_CROS_EC_SPI=y +CONFIG_CROS_EC_PROTO=y +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CROS_EC_CHARDEV=y +CONFIG_CROS_EC_LIGHTBAR=y +CONFIG_CROS_EC_VBC=y +CONFIG_CROS_EC_SYSFS=y +# CONFIG_MELLANOX_PLATFORM is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y # # Common Clock Framework @@ -2777,43 +5017,108 @@ CONFIG_FB_TFT_FBTFT_DEVICE=m CONFIG_COMMON_CLK_VERSATILE=y CONFIG_CLK_SP810=y CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_CLK_HSDK is not set +# CONFIG_COMMON_CLK_MAX77686 is not set +# CONFIG_COMMON_CLK_MAX9485 is not set CONFIG_COMMON_CLK_RK808=y CONFIG_COMMON_CLK_SCPI=y +# CONFIG_COMMON_CLK_SI5341 is not set +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y -# CONFIG_CLK_QORIQ is not set -# CONFIG_COMMON_CLK_XGENE is not set +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_XGENE=y CONFIG_COMMON_CLK_PWM=y +# CONFIG_COMMON_CLK_VC5 is not set +# CONFIG_COMMON_CLK_BD718XX is not set +# CONFIG_COMMON_CLK_FIXED_MMIO is not set +CONFIG_COMMON_CLK_IPROC=y +CONFIG_CLK_BCM_NS2=y +CONFIG_CLK_BCM_SR=y +CONFIG_COMMON_CLK_MESON_REGMAP=y +CONFIG_COMMON_CLK_MESON_DUALDIV=y +CONFIG_COMMON_CLK_MESON_MPLL=y +CONFIG_COMMON_CLK_MESON_PLL=y +CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y +CONFIG_COMMON_CLK_MESON_AO_CLKC=y +CONFIG_COMMON_CLK_MESON_EE_CLKC=y +CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y +CONFIG_COMMON_CLK_GXBB=y +CONFIG_COMMON_CLK_AXG=y +# CONFIG_COMMON_CLK_AXG_AUDIO is not set +CONFIG_COMMON_CLK_G12A=y +# end of Common Clock Framework + CONFIG_HWSPINLOCK=y # # Clock Source drivers # +CONFIG_TIMER_OF=y +CONFIG_TIMER_ACPI=y +CONFIG_TIMER_PROBE=y CONFIG_CLKSRC_MMIO=y -# CONFIG_HISILICON_ERRATUM_161010101 is not set -CONFIG_ARM_TIMER_SP804=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_HISILICON_ERRATUM_161010101=y +CONFIG_ARM64_ERRATUM_858921=y CONFIG_CLKSRC_VERSATILE=y +# end of Clock Source drivers + CONFIG_MAILBOX=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y # CONFIG_PL320_MBOX is not set +CONFIG_PCC=y # CONFIG_ALTERA_MBOX is not set # CONFIG_MAILBOX_TEST is not set +# CONFIG_BCM_PDC_MBOX is not set +CONFIG_BCM_FLEXRM_MBOX=m +CONFIG_IOMMU_IOVA=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# end of Generic IOMMU Pagetable Support + +# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y CONFIG_ARM_SMMU_V3=y +# CONFIG_VIRTIO_IOMMU is not set # # Remoteproc drivers # +CONFIG_REMOTEPROC=y +# end of Remoteproc drivers # # Rpmsg drivers # -# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +CONFIG_RPMSG=y +# CONFIG_RPMSG_CHAR is not set +CONFIG_RPMSG_QCOM_GLINK_NATIVE=y +CONFIG_RPMSG_QCOM_GLINK_RPM=y +# CONFIG_RPMSG_VIRTIO is not set +# end of Rpmsg drivers + +# CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers @@ -2822,82 +5127,270 @@ CONFIG_ARM_SMMU_V3=y # # Amlogic SoC drivers # +CONFIG_MESON_CANVAS=m +CONFIG_MESON_CLK_MEASURE=y +CONFIG_MESON_GX_SOCINFO=y +CONFIG_MESON_GX_PM_DOMAINS=y +CONFIG_MESON_EE_PM_DOMAINS=y +CONFIG_MESON_MX_SOCINFO=y +# end of Amlogic SoC drivers + +# +# Aspeed SoC drivers +# +# end of Aspeed SoC drivers # # Broadcom SoC drivers # -# CONFIG_SOC_BRCMSTB is not set +CONFIG_SOC_BRCMSTB=y +# end of Broadcom SoC drivers + +# +# NXP/Freescale QorIQ SoC drivers +# +# end of NXP/Freescale QorIQ SoC drivers # # i.MX SoC drivers # +# end of i.MX SoC drivers # # Qualcomm SoC drivers # -# CONFIG_SUNXI_SRAM is not set +# end of Qualcomm SoC drivers + +CONFIG_SOC_TI=y # # Xilinx SoC drivers # +# CONFIG_XILINX_VCU is not set +# end of Xilinx SoC drivers +# end of SOC (System On Chip) specific Drivers + CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y +# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set +# CONFIG_DEVFREQ_GOV_POWERSAVE is not set +# CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # # CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_EXTCON=y # # Extcon Device Drivers # +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_FSA9480 is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_PTN5150 is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set CONFIG_EXTCON_USB_GPIO=y +CONFIG_EXTCON_USBC_CROS_EC=y +CONFIG_MEMORY=y +# CONFIG_ARM_PL172_MPMC is not set CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +# CONFIG_IIO_BUFFER_HW_CONSUMER is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +# CONFIG_IIO_CONFIGFS is not set +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set # # Accelerometers # +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADXL345_I2C is not set +# CONFIG_ADXL345_SPI is not set +# CONFIG_ADXL372_SPI is not set +# CONFIG_ADXL372_I2C is not set +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DA280 is not set +# CONFIG_DA311 is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_DMARD10 is not set +# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_SCA3000 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set +# end of Accelerometers # # Analog to digital converters # +# CONFIG_AD7124 is not set +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7606_IFACE_PARALLEL is not set +# CONFIG_AD7606_IFACE_SPI is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7768_1 is not set +# CONFIG_AD7780 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD7949 is not set +# CONFIG_AD799X is not set +# CONFIG_AXP20X_ADC is not set +# CONFIG_AXP288_ADC is not set +# CONFIG_BCM_IPROC_ADC is not set # CONFIG_CC10001_ADC is not set +# CONFIG_ENVELOPE_DETECTOR is not set +# CONFIG_HI8435 is not set +# CONFIG_HX711 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2471 is not set +# CONFIG_LTC2485 is not set +# CONFIG_LTC2497 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MAX9611 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MCP3911 is not set +CONFIG_MESON_SARADC=y +# CONFIG_NAU7802 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_SD_ADC_MODULATOR is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_ADS8344 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_TI_ADS124S08 is not set +# CONFIG_TI_TLC4541 is not set +# CONFIG_VF610_ADC is not set +# CONFIG_XILINX_XADC is not set +# end of Analog to digital converters + +# +# Analog Front Ends +# +# CONFIG_IIO_RESCALE is not set +# end of Analog Front Ends # # Amplifiers # +# CONFIG_AD8366 is not set +# end of Amplifiers # # Chemical Sensors # +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_BME680 is not set +# CONFIG_CCS811 is not set +# CONFIG_IAQCORE is not set +# CONFIG_PMS7003 is not set +# CONFIG_SENSIRION_SGP30 is not set +# CONFIG_SPS30 is not set +# CONFIG_VZ89X is not set +# end of Chemical Sensors + +CONFIG_IIO_CROS_EC_SENSORS_CORE=m +CONFIG_IIO_CROS_EC_SENSORS=m +# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set # # Hid Sensor IIO Common # +# end of Hid Sensor IIO Common # # SSP Sensor Common # - -# -# Counters -# +# CONFIG_IIO_SSP_SENSORHUB is not set +# end of SSP Sensor Common # # Digital to analog converters # +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_LTC1660 is not set +# CONFIG_LTC2632 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_DPOT_DAC is not set +# CONFIG_DS4424 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set +# CONFIG_TI_DAC7311 is not set +# CONFIG_TI_DAC7612 is not set +# CONFIG_VF610_DAC is not set +# end of Digital to analog converters # # IIO dummy driver # +# end of IIO dummy driver # # Frequency Synthesizers DDS/PLL @@ -2906,14 +5399,31 @@ CONFIG_IIO=y # # Clock Generator/Distribution # +# CONFIG_AD9523 is not set +# end of Clock Generator/Distribution # # Phase-Locked Loop (PLL) frequency synthesizers # +# CONFIG_ADF4350 is not set +# CONFIG_ADF4371 is not set +# end of Phase-Locked Loop (PLL) frequency synthesizers +# end of Frequency Synthesizers DDS/PLL # # Digital gyroscope sensors # +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +# CONFIG_FXAS21002C is not set +# CONFIG_MPU3050_I2C is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set +# end of Digital gyroscope sensors # # Health Sensors @@ -2922,240 +5432,934 @@ CONFIG_IIO=y # # Heart Rate Monitors # +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set +# end of Heart Rate Monitors +# end of Health Sensors # # Humidity sensors # +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +# CONFIG_HTS221 is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set +# end of Humidity sensors # # Inertial measurement units # +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IIO_ST_LSM6DSX is not set +# end of Inertial measurement units # # Light sensors # +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM3605 is not set +# CONFIG_CM36651 is not set +CONFIG_IIO_CROS_EC_LIGHT_PROX=m +# CONFIG_GP2AP020A00F is not set +CONFIG_SENSORS_ISL29018=m +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_ISL29125 is not set +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_LV0104CS is not set +# CONFIG_MAX44000 is not set +# CONFIG_MAX44009 is not set +# CONFIG_NOA1305 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1133 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_ST_UVIS25 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VCNL4035 is not set +# CONFIG_VEML6070 is not set +# CONFIG_VL6180 is not set +# CONFIG_ZOPT2201 is not set +# end of Light sensors # # Magnetometer sensors # +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set +# CONFIG_SENSORS_RM3100_I2C is not set +# CONFIG_SENSORS_RM3100_SPI is not set +# end of Magnetometer sensors # # Multiplexers # +# CONFIG_IIO_MUX is not set +# end of Multiplexers # # Inclinometer sensors # +# end of Inclinometer sensors + +# +# Triggers - standalone +# +# CONFIG_IIO_INTERRUPT_TRIGGER is not set +# CONFIG_IIO_SYSFS_TRIGGER is not set +# end of Triggers - standalone # # Digital potentiometers # +# CONFIG_AD5272 is not set +# CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4018 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_MCP41010 is not set +# CONFIG_TPL0102 is not set +# end of Digital potentiometers # # Digital potentiostats # +# CONFIG_LMP91000 is not set +# end of Digital potentiostats # # Pressure sensors # +# CONFIG_ABP060MG is not set +# CONFIG_BMP280 is not set +CONFIG_IIO_CROS_EC_BARO=m +# CONFIG_DPS310 is not set +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +CONFIG_MPL3115=m +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set +# end of Pressure sensors # # Lightning sensors # +# CONFIG_AS3935 is not set +# end of Lightning sensors # # Proximity and distance sensors # +# CONFIG_ISL29501 is not set +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_MB1232 is not set +# CONFIG_RFD77402 is not set +# CONFIG_SRF04 is not set +# CONFIG_SX9500 is not set +# CONFIG_SRF08 is not set +# CONFIG_VL53L0X_I2C is not set +# end of Proximity and distance sensors + +# +# Resolver to digital converters +# +# CONFIG_AD2S90 is not set +# CONFIG_AD2S1200 is not set +# end of Resolver to digital converters # # Temperature sensors # +# CONFIG_MAXIM_THERMOCOUPLE is not set +# CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set +# CONFIG_TMP006 is not set +# CONFIG_TMP007 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_MAX31856 is not set +# end of Temperature sensors + +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +CONFIG_PWM_BCM_IPROC=y CONFIG_PWM_CROS_EC=m +# CONFIG_PWM_FSL_FTM is not set CONFIG_PWM_MESON=y +# CONFIG_PWM_PCA9685 is not set # # IRQ chip support # -# CONFIG_RESET_BERLIN is not set -# CONFIG_RESET_SIMPLE is not set -# CONFIG_RESET_SUNXI is not set -# CONFIG_RESET_TEGRA_BPMP is not set +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +# CONFIG_AL_FIC is not set +CONFIG_PARTITION_PERCPU=y +CONFIG_MESON_IRQ_GPIO=y +# end of IRQ chip support + +# CONFIG_IPACK_BUS is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_MESON=y +# CONFIG_RESET_MESON_AUDIO_ARB is not set +# CONFIG_RESET_TI_SYSCON is not set # # PHY Subsystem # -# CONFIG_PHY_XGENE is not set -# CONFIG_PHY_QCOM_USB_HS is not set -# CONFIG_PHY_SAMSUNG_USB2 is not set +CONFIG_GENERIC_PHY=y +CONFIG_PHY_XGENE=y +CONFIG_PHY_MESON8B_USB2=y +CONFIG_PHY_MESON_GXL_USB2=y +CONFIG_PHY_MESON_GXL_USB3=y +CONFIG_PHY_MESON_G12A_USB2=y +CONFIG_PHY_MESON_G12A_USB3_PCIE=y +CONFIG_PHY_BCM_SR_USB=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +CONFIG_PHY_NS2_PCIE=y +CONFIG_PHY_NS2_USB_DRD=y +CONFIG_PHY_BRCM_SATA=y +CONFIG_PHY_BCM_SR_PCIE=y +# CONFIG_PHY_CADENCE_DP is not set +# CONFIG_PHY_CADENCE_DPHY is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +CONFIG_PHY_FSL_IMX8MQ_USB=y +# CONFIG_PHY_MIXEL_MIPI_DPHY is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_CPCAP_USB is not set +# CONFIG_PHY_MAPPHONE_MDM6600 is not set +# CONFIG_PHY_OCELOT_SERDES is not set +CONFIG_PHY_QCOM_USB_HS=y +# CONFIG_PHY_QCOM_USB_HSIC is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_TUSB1210 is not set +# end of PHY Subsystem + +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set # # Performance monitor support # +# CONFIG_ARM_CCI_PMU is not set +# CONFIG_ARM_CCN is not set +CONFIG_ARM_PMU=y +CONFIG_ARM_PMU_ACPI=y +# CONFIG_ARM_SMMU_V3_PMU is not set +# CONFIG_ARM_DSU_PMU is not set +CONFIG_HISI_PMU=y +# CONFIG_ARM_SPE_PMU is not set +# end of Performance monitor support + CONFIG_RAS=y # # Android # -CONFIG_DAX=m -# CONFIG_DEV_DAX is not set +# CONFIG_ANDROID is not set +# end of Android + +# CONFIG_LIBNVDIMM is not set +# CONFIG_DAX is not set CONFIG_NVMEM=y -CONFIG_MESON_EFUSE=y +CONFIG_NVMEM_SYSFS=y +CONFIG_NVMEM_BCM_OCOTP=y +# CONFIG_MESON_EFUSE is not set +# CONFIG_MESON_MX_EFUSE is not set + +# +# HW tracing support +# +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set +# end of HW tracing support + +CONFIG_FPGA=y +# CONFIG_ALTERA_PR_IP_CORE is not set +# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set +# CONFIG_FPGA_MGR_ALTERA_CVP is not set +# CONFIG_FPGA_MGR_XILINX_SPI is not set +# CONFIG_FPGA_MGR_ICE40_SPI is not set +# CONFIG_FPGA_MGR_MACHXO2_SPI is not set +CONFIG_FPGA_BRIDGE=m +CONFIG_ALTERA_FREEZE_BRIDGE=m +# CONFIG_XILINX_PR_DECOUPLER is not set +CONFIG_FPGA_REGION=m +CONFIG_OF_FPGA_REGION=m +# CONFIG_FPGA_DFL is not set +# CONFIG_FSI is not set CONFIG_TEE=y # # TEE drivers # CONFIG_OPTEE=y +CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 +# end of TEE drivers -# -# Firmware Drivers -# -CONFIG_ARM_SCPI_PROTOCOL=y - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_CAPSULE_LOADER=y - -# -# Tegra firmware driver -# -CONFIG_ACPI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_MEMORY_FAILURE=y -CONFIG_ACPI_APEI_EINJ=y +CONFIG_PM_OPP=y +# CONFIG_SIOX is not set +# CONFIG_SLIMBUS is not set +# CONFIG_INTERCONNECT is not set +# CONFIG_COUNTER is not set +# end of Device Drivers # # File systems # +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_VALIDATE_FS_PARSER is not set +CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_ONLINE_SCRUB is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -# CONFIG_F2FS_FS_POSIX_ACL is not set -# CONFIG_F2FS_FS_SECURITY is not set -# CONFIG_F2FS_CHECK_FS is not set -# CONFIG_F2FS_FS_ENCRYPTION is not set -# CONFIG_F2FS_IO_TRACE is not set -# CONFIG_F2FS_FAULT_INJECTION is not set +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_BTRFS_FS_REF_VERIFY is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_FS_DAX is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +# CONFIG_FS_VERITY is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y -CONFIG_QUOTA_TREE=y -CONFIG_QFMT_V2=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=y CONFIG_FUSE_FS=m CONFIG_CUSE=m +# CONFIG_VIRTIO_FS is not set CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set # # Caches # -CONFIG_FSCACHE=m -# CONFIG_FSCACHE_STATS is not set -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -# CONFIG_CACHEFILES is not set +# CONFIG_FSCACHE is not set +# end of Caches # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set +# end of CD-ROM/DVD Filesystems # # DOS/FAT/NT Filesystems # -CONFIG_MSDOS_FS=y +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set +# end of DOS/FAT/NT Filesystems # # Pseudo filesystems # -CONFIG_PROC_KCORE=y +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_VMCORE=y +# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROC_CHILDREN is not set +CONFIG_KERNFS=y +CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_HFSPLUS_FS_POSIX_ACL is not set -CONFIG_CRAMFS=y -CONFIG_CRAMFS_BLOCKDEV=y -# CONFIG_CRAMFS_MTD is not set +# end of Pseudo filesystems + +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_PSTORE_FTRACE is not set +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_PSTORE=y +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_RAM is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_EROFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=y CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -# CONFIG_NFSD_BLOCKLAYOUT is not set -# CONFIG_NFSD_SCSILAYOUT is not set -# CONFIG_NFSD_FLEXFILELAYOUT is not set -# CONFIG_NFSD_V4_SECURITY_LABEL is not set -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_UPCALL is not set -CONFIG_CIFS_XATTR=y -# CONFIG_CIFS_POSIX is not set -# CONFIG_CIFS_ACL is not set -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set -CONFIG_CIFS_DFS_UPCALL=y -# CONFIG_CIFS_SMB311 is not set -# CONFIG_CIFS_FSCACHE is not set +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set CONFIG_9P_FS=y +# CONFIG_9P_FS_POSIX_ACL is not set +# CONFIG_9P_FS_SECURITY is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_UNICODE is not set +# end of File systems + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_COMPAT=y +# CONFIG_KEYS_REQUEST_CACHE is not set +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_TRUSTED_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +# CONFIG_HARDENED_USERCOPY is not set +# CONFIG_FORTIFY_SOURCE is not set +# CONFIG_STATIC_USERMODEHELPER is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_YAMA is not set +# CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" + +# +# Kernel hardening options +# + +# +# Memory initialization +# +CONFIG_INIT_STACK_NONE=y +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +# end of Memory initialization +# end of Kernel hardening options +# end of Security options + +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y +CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_ENGINE=m + +# +# Public-key cryptography +# +CONFIG_CRYPTO_RSA=y +# CONFIG_CRYPTO_DH is not set +CONFIG_CRYPTO_ECC=m +CONFIG_CRYPTO_ECDH=m +# CONFIG_CRYPTO_ECRDSA is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_AEGIS128 is not set +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_ECHAINIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CFB is not set +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_OFB is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set +# CONFIG_CRYPTO_ADIANTUM is not set +# CONFIG_CRYPTO_ESSIV is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_XXHASH is not set +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m +# CONFIG_CRYPTO_STREEBOG is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_TI is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_LIB_ARC4=m +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_LIB_DES=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_CHACHA20=m +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SM4 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ZSTD is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set +# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set +# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set +CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_CRYPTO_DEV_BCM_SPU=m +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set +# CONFIG_CRYPTO_DEV_CCREE is not set +# CONFIG_CRYPTO_DEV_HISI_SEC is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set + +# +# Certificates for signature checking +# +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set +# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set +# end of Certificates for signature checking + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_RAID6_PQ_BENCHMARK=y +# CONFIG_PACKING is not set +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +# CONFIG_CORDIC is not set +CONFIG_RATIONAL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_INDIRECT_PIO=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +# CONFIG_CRC64 is not set +# CONFIG_CRC4 is not set +CONFIG_CRC7=y +CONFIG_LIBCRC32C=m +# CONFIG_CRC8 is not set +CONFIG_XXHASH=y +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_ZSTD_COMPRESS=m +CONFIG_ZSTD_DECOMPRESS=m +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_XARRAY_MULTI=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DMA_DECLARE_COHERENT=y +CONFIG_ARCH_HAS_SETUP_DMA_OPS=y +CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y +CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y +CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y +CONFIG_SWIOTLB=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +# CONFIG_DMA_API_DEBUG is not set +CONFIG_SGL_ALLOC=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_CLZ_TAB=y +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_DIMLIB=y +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_HAVE_GENERIC_VDSO=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_SG_POOL=y +CONFIG_SBITMAP=y +# CONFIG_STRING_SELFTEST is not set +# end of Library routines # # Kernel hacking @@ -3165,160 +6369,137 @@ CONFIG_KVM=y # printk and dmesg options # CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_CALLER is not set +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# end of printk and dmesg options # # Compile-time checks and compiler options # -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_INSTALL is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# end of Compile-time checks and compiler options + CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +# CONFIG_DEBUG_KERNEL is not set # # Memory Debugging # -# CONFIG_DEBUG_PAGE_REF is not set +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y +CONFIG_CC_HAS_KASAN_GENERIC=y +# CONFIG_KASAN is not set +CONFIG_KASAN_STACK=1 +# end of Memory Debugging + +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set # # Debug Lockups and Hangs # -# CONFIG_SCHED_DEBUG is not set -CONFIG_SCHEDSTATS=y -# CONFIG_DEBUG_PREEMPT is not set +# end of Debug Lockups and Hangs + +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_INFO=y +# CONFIG_DEBUG_TIMEKEEPING is not set # # Lock Debugging (spinlocks, mutexes, etc...) # -CONFIG_STACKTRACE=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_WW_MUTEX_SELFTEST is not set +# end of Lock Debugging (spinlocks, mutexes, etc...) + +# CONFIG_STACKTRACE is not set +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y # # RCU Debugging # -CONFIG_NOP_TRACER=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_PREEMPTIRQ_EVENTS is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -CONFIG_FTRACE_SYSCALLS=y -# CONFIG_TRACER_SNAPSHOT is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -CONFIG_STACK_TRACER=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_UPROBE_EVENTS=y -CONFIG_PROBE_EVENTS=y -CONFIG_DYNAMIC_FTRACE=y -CONFIG_FUNCTION_PROFILER=y -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_HIST_TRIGGERS is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -CONFIG_TRACING_EVENTS_GPIO=y -# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# end of RCU Debugging + +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_REED_SOLOMON_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_STRSCPY is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_XARRAY is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_VMALLOC is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_BLACKHOLE_DEV is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_TEST_MEMCAT_P is not set +# CONFIG_TEST_STACKINIT is not set +# CONFIG_TEST_MEMINIT is not set CONFIG_MEMTEST=y -CONFIG_KGDB=y -CONFIG_KGDB_SERIAL_CONSOLE=y -CONFIG_KGDB_TESTS=y -# CONFIG_KGDB_TESTS_ON_BOOT is not set -# CONFIG_KGDB_KDB is not set - -# -# Security options -# -# CONFIG_BIG_KEYS is not set -CONFIG_SECURITY=y -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m - -# -# Crypto core or helper -# -CONFIG_CRYPTO_AUTHENC=y - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_ECHAINIV=y - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTS=m - -# -# Hash modes -# - -# -# Digest -# -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA512=m - -# -# Ciphers -# -CONFIG_CRYPTO_DES=y - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=y - -# -# Certificates for signature checking -# -CONFIG_ARM64_CRYPTO=y -CONFIG_CRYPTO_SHA256_ARM64=y -CONFIG_CRYPTO_SHA512_ARM64=m -CONFIG_CRYPTO_SHA1_ARM64_CE=y -CONFIG_CRYPTO_SHA2_ARM64_CE=y -CONFIG_CRYPTO_GHASH_ARM64_CE=y -CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m -CONFIG_CRYPTO_CRC32_ARM64_CE=m -CONFIG_CRYPTO_AES_ARM64=y -CONFIG_CRYPTO_AES_ARM64_CE=y -CONFIG_CRYPTO_AES_ARM64_CE_CCM=y -CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_CRYPTO_AES_ARM64_BS=m -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_CRC_CCITT=m -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +# CONFIG_IO_STRICT_DEVMEM is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +# CONFIG_DEBUG_WX is not set +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_ARM64_RELOC_TEST is not set +# CONFIG_CORESIGHT is not set +# end of Kernel hacking diff --git a/buildroot-external/board/hardkernel/odroid-c2/patches/linux/000-arm64_dts_meson_Fix_IRQ_trigger_type_for_macirq.patch b/buildroot-external/board/hardkernel/odroid-c2/patches/linux/000-arm64_dts_meson_Fix_IRQ_trigger_type_for_macirq.patch deleted file mode 100644 index a3f006641..000000000 --- a/buildroot-external/board/hardkernel/odroid-c2/patches/linux/000-arm64_dts_meson_Fix_IRQ_trigger_type_for_macirq.patch +++ /dev/null @@ -1,50 +0,0 @@ -diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi -index b160bd1084de..fffd55787981 100644 ---- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi -+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi -@@ -461,7 +461,7 @@ - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; -- interrupts = ; -+ interrupts = ; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, -diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi -index ed336c7a98a7..44c5c51ff1fa 100644 ---- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi -+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi -@@ -467,7 +467,7 @@ - compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; -- interrupts = ; -+ interrupts = ; - interrupt-names = "macirq"; - status = "disabled"; - }; -diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts -index 00f7be6d83f7..2e1cd5e3a246 100644 ---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts -+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts -@@ -143,7 +143,6 @@ - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_15 */ - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; -- eee-broken-1000t; - }; - }; - }; -diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi -index 70325b273bd2..ec09bb5792b7 100644 ---- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi -+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi -@@ -142,7 +142,6 @@ - eth_phy0: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; -- eee-broken-1000t; - }; - }; - }; diff --git a/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush b/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush index 9f00e3b5c..0135a0744 100644 --- a/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush +++ b/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush @@ -24,7 +24,7 @@ fi # Board bootargs if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi -setenv bootargs_odroidc2 "${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}" +setenv bootargs_odroidc2 "no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}" # HassOS bootargs setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory" diff --git a/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt b/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt new file mode 100644 index 000000000..476e9cd34 --- /dev/null +++ b/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt @@ -0,0 +1,84 @@ + + +# Custom modeline! +# To use custom modeline you need to disable all the below resolutions +# and setup your own! +# For more information check our wiki: +# https://wiki.odroid.com/odroid-n2/application_note/software/set_display_mode + +# HDMI Mode +# Resolution Configuration +# Symbol | Resolution +# ----------------------+------------- +# "480x320p60hz" | 480x320 Progressive 60Hz +# "480p60hz" | 720x480 Progressive 60Hz +# "576p50hz" | 720x576 Progressive 50Hz +# "720p60hz" | 1280x720 Progressive 60Hz +# "720p50hz" | 1280x720 Progressive 50Hz +# "1080p60hz" | 1920x1080 Progressive 60Hz +# "1080p50hz" | 1920x1080 Progressive 50Hz +# "1080p30hz" | 1920x1080 Progressive 30Hz +# "1080p24hz" | 1920x1080 Progressive 24Hz +# "1080i60hz" | 1920x1080 Interlaced 60Hz +# "1080i50hz" | 1920x1080 Interlaced 50Hz +# "2160p60hz" | 3840x2160 Progressive 60Hz +# "2160p50hz" | 3840x2160 Progressive 50Hz +# "2160p30hz" | 3840x2160 Progressive 30Hz +# "2160p25hz" | 3840x2160 Progressive 25Hz +# "2160p24hz" | 3840x2160 Progressive 24Hz +# "smpte24hz" | 3840x2160 Progressive 24Hz SMPTE +# "2160p60hz420" | 3840x2160 Progressive 60Hz YCbCr 4:2:0 +# "2160p50hz420" | 3840x2160 Progressive 50Hz YCbCr 4:2:0 +# "640x480p60hz" | 640x480 Progressive 60Hz +# "800x480p60hz" | 800x480 Progressive 60Hz +# "800x600p60hz" | 800x600 Progressive 60Hz +# "1024x600p60hz" | 1024x600 Progressive 60Hz +# "1024x768p60hz" | 1024x768 Progressive 60Hz +# "1280x800p60hz" | 1280x800 Progressive 60Hz +# "1280x1024p60hz" | 1280x1024 Progressive 60Hz +# "1360x768p60hz" | 1360x768 Progressive 60Hz +# "1440x900p60hz" | 1440x900 Progressive 60Hz +# "1600x900p60hz" | 1600x900 Progressive 60Hz +# "1600x1200p60hz" | 1600x1200 Progressive 60Hz +# "1680x1050p60hz" | 1680x1050 Progressive 60Hz +# "1920x1200p60hz" | 1920x1200 Progressive 60Hz +# "2560x1080p60hz" | 2560x1080 Progressive 60Hz +# "2560x1440p60hz" | 2560x1440 Progressive 60Hz +# "2560x1600p60hz" | 2560x1600 Progressive 60Hz +# "3440x1440p60hz" | 3440x1440 Progressive 60Hz +hdmimode=1080p60hz + +# Overscan percentage +# This value scales down the actual screen size by the percentage below +# valid range is 80 to 100 +overscan=100 + +### voutmode : hdmi or dvi +#voutmode=dvi +voutmode=hdmi + +# HPD enable/disable option +disablehpd="false" + +# max cpu frequency for big core, A73 in MHz unit +# 1.8 GHz, default value +#max_freq_a73=2004 # 2.004 GHz +#max_freq_a73=1908 # 1.908 GHz +#max_freq_a73=1704 # 1.704 GHz +max_freq_a73=1800 + +# max cpu frequency for little core, A53 in MHz unit +# 1.896 GHz, default value +#max_freq_a53=1992 # 1.992 GHz +#max_freq_a53=1704 # 1.704 GHz +max_freq_a53=1896 + + +# max cpu-cores +# Note: +# CPU's 0 and 1 are the A53 (small cores) +# CPU's 2 to 5 are the A73 (big cores) +# Lowering this value disables only the bigger cores (the last cores). +#maxcpus=4 +#maxcpus=5 +maxcpus=6 diff --git a/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh b/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh new file mode 100755 index 000000000..49347ae70 --- /dev/null +++ b/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh @@ -0,0 +1,25 @@ +#!/bin/bash +# shellcheck disable=SC2155 + +function hassos_pre_image() { + local BOOT_DATA="$(path_boot_dir)" + local UBOOT_G12B="${BINARIES_DIR}/u-boot.g12b" + local SPL_IMG="$(path_spl_img)" + + cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr" + cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/config.txt" + cp "${BINARIES_DIR}/meson-g12b-odroid-n2.dtb" "${BOOT_DATA}/meson-g12b-odroid-n2.dtb" + + echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt" + + # SPL + create_spl_image + + dd if="${UBOOT_G12B}" of="${SPL_IMG}" conv=notrunc bs=512 seek=1 +} + + +function hassos_post_image() { + convert_disk_image_gz +} + diff --git a/buildroot-external/board/hardkernel/odroid-n2/kernel.config b/buildroot-external/board/hardkernel/odroid-n2/kernel.config new file mode 100644 index 000000000..48787dff0 --- /dev/null +++ b/buildroot-external/board/hardkernel/odroid-n2/kernel.config @@ -0,0 +1,6505 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 5.4.0 Kernel Configuration +# + +# +# Compiler: gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0 +# +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=70400 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_CAN_LINK=y +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_COMPILE_TEST is not set +# CONFIG_HEADER_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_BUILD_SALT="" +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_IRQ_MSI_IOMMU=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# end of IRQ subsystem + +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +# end of Timers subsystem + +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_PREEMPTION=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_SCHED_AVG_IRQ=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_PSI is not set +# end of CPU/Task time and stats accounting + +CONFIG_CPU_ISOLATION=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +CONFIG_TASKS_RCU=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +# end of RCU Subsystem + +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_IKHEADERS is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_GENERIC_SCHED_CLOCK=y + +# +# Scheduler features +# +# CONFIG_UCLAMP_TASK is not set +# end of Scheduler features + +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_NUMA_BALANCING=y +CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_RDMA is not set +# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y +CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_IO_URING=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +# CONFIG_BPF_SYSCALL is not set +# CONFIG_USERFAULTFD is not set +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# end of Kernel Performance Events And Counters + +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLAB_MERGE_DEFAULT=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +# CONFIG_SLAB_FREELIST_HARDENED is not set +# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SYSTEM_DATA_VERIFICATION=y +CONFIG_PROFILING=y +# end of General setup + +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_SMP=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_PROC_KCORE_TEXT=y + +# +# Platform selection +# +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_AGILEX is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_BCM2835 is not set +CONFIG_ARCH_BCM_IPROC=y +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BITMAIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_MEDIATEK is not set +CONFIG_ARCH_MESON=y +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_REALTEK is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SEATTLE is not set +# CONFIG_ARCH_STRATIX10 is not set +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_SPRD is not set +# CONFIG_ARCH_THUNDER is not set +# CONFIG_ARCH_THUNDER2 is not set +# CONFIG_ARCH_UNIPHIER is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_XGENE is not set +# CONFIG_ARCH_ZX is not set +# CONFIG_ARCH_ZYNQMP is not set +# end of Platform selection + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_ARM64_ERRATUM_1024718=y +CONFIG_ARM64_ERRATUM_1418040=y +CONFIG_ARM64_ERRATUM_1165522=y +CONFIG_ARM64_ERRATUM_1286807=y +CONFIG_ARM64_ERRATUM_1463225=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23144=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_CAVIUM_ERRATUM_30115=y +CONFIG_CAVIUM_TX2_ERRATUM_219=y +CONFIG_QCOM_FALKOR_ERRATUM_1003=y +CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y +CONFIG_QCOM_FALKOR_ERRATUM_1009=y +CONFIG_QCOM_QDF2400_ERRATUM_0065=y +CONFIG_SOCIONEXT_SYNQUACER_PREITS=y +CONFIG_HISILICON_ERRATUM_161600802=y +CONFIG_QCOM_FALKOR_ERRATUM_E1041=y +CONFIG_FUJITSU_ERRATUM_010001=y +# end of ARM errata workarounds via the alternatives framework + +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +CONFIG_ARM64_PA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=256 +CONFIG_HOTPLUG_CPU=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=2 +CONFIG_USE_PERCPU_NUMA_NODE_ID=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_HOLES_IN_ZONE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_KEXEC=y +# CONFIG_KEXEC_FILE is not set +CONFIG_CRASH_DUMP=y +CONFIG_XEN_DOM0=y +CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDEN_EL2_VECTORS=y +CONFIG_ARM64_SSBD=y +CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +# CONFIG_ARM64_SW_TTBR0_PAN is not set +CONFIG_ARM64_TAGGED_ADDR_ABI=y +CONFIG_COMPAT=y +CONFIG_KUSER_HELPERS=y +# CONFIG_ARMV8_DEPRECATED is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +CONFIG_ARM64_LSE_ATOMICS=y +CONFIG_ARM64_VHE=y +# end of ARMv8.1 architectural features + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +# CONFIG_ARM64_PMEM is not set +CONFIG_ARM64_RAS_EXTN=y +CONFIG_ARM64_CNP=y +# end of ARMv8.2 architectural features + +# +# ARMv8.3 architectural features +# +CONFIG_ARM64_PTR_AUTH=y +# end of ARMv8.3 architectural features + +CONFIG_ARM64_SVE=y +CONFIG_ARM64_MODULE_PLTS=y +# CONFIG_ARM64_PSEUDO_NMI is not set +CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_RANDOMIZE_MODULE_REGION_FULL=y +# end of Kernel Features + +# +# Boot options +# +# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y +# end of Boot options + +CONFIG_SYSVIPC_COMPAT=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +# CONFIG_ENERGY_MODEL is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# end of Power management options + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_IDLE_GOV_TEO is not set +CONFIG_DT_IDLE_STATES=y + +# +# ARM CPU Idle Drivers +# +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_PSCI_CPUIDLE=y +# end of ARM CPU Idle Drivers +# end of CPU Idle + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ACPI_CPPC_CPUFREQ=m +CONFIG_ARM_SCPI_CPUFREQ=y +# CONFIG_QORIQ_CPUFREQ is not set +# end of CPU Frequency scaling +# end of CPU Power Management + +# +# Firmware Drivers +# +# CONFIG_ARM_SCMI_PROTOCOL is not set +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ARM_SCPI_POWER_DOMAIN=y +# CONFIG_ARM_SDE_INTERFACE is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +# CONFIG_ISCSI_IBFT is not set +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_HAVE_ARM_SMCCC=y +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_PSCI_CHECKER is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +# CONFIG_EFI_VARS is not set +CONFIG_EFI_ESRT=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +CONFIG_EFI_ARMSTUB_DTB_LOADER=y +CONFIG_EFI_CAPSULE_LOADER=y +# CONFIG_EFI_TEST is not set +# CONFIG_RESET_ATTACK_MITIGATION is not set +# end of EFI (Extensible Firmware Interface) Support + +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_ARM=y +CONFIG_EFI_EARLYCON=y +CONFIG_MESON_SM=y + +# +# Tegra firmware driver +# +# end of Tegra firmware driver +# end of Firmware Drivers + +CONFIG_ARCH_SUPPORTS_ACPI=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_TAD is not set +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y +# CONFIG_ACPI_IPMI is not set +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HED=y +# CONFIG_ACPI_BGRT is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_ACPI_HMAT is not set +CONFIG_HAVE_ACPI_APEI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_SEA=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y +CONFIG_ACPI_GTDT=y +CONFIG_ACPI_PPTT=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y +CONFIG_IRQ_BYPASS_MANAGER=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +CONFIG_KVM_INDIRECT_VECTORS=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA256_ARM64=y +CONFIG_CRYPTO_SHA512_ARM64=m +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_SHA512_ARM64_CE=m +CONFIG_CRYPTO_SHA3_ARM64=m +CONFIG_CRYPTO_SM3_ARM64_CE=m +# CONFIG_CRYPTO_SM4_ARM64_CE is not set +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m +CONFIG_CRYPTO_CHACHA20_NEON=m +# CONFIG_CRYPTO_NHPOLY1305_NEON is not set +CONFIG_CRYPTO_AES_ARM64_BS=m + +# +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_KEEPINITRD=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SET_DIRECT_MAP=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ASM_MODVERSIONS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_STACKLEAK=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_64BIT_TIME=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_REFCOUNT_FULL=y +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y +CONFIG_ARCH_HAS_RELR=y + +# +# GCOV-based kernel profiling +# +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +# end of GCOV-based kernel profiling + +CONFIG_PLUGIN_HOSTCC="" +CONFIG_HAVE_GCC_PLUGINS=y +# end of General architecture-dependent options + +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_ZONED is not set +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +# CONFIG_BLK_WBT is not set +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_CGROUP_IOCOST is not set +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +# end of Partition Types + +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_PM=y + +# +# IO Schedulers +# +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +# CONFIG_IOSCHED_BFQ is not set +# end of IO Schedulers + +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_ASN1=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +# end of Executable file formats + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_FAST_GUP=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_CONTIG_ALLOC=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_ARCH_HAS_PTE_DEVMAP=y +CONFIG_FRAME_VECTOR=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +# end of Memory Management options + +CONFIG_NET=y +CONFIG_NET_INGRESS=y +CONFIG_SKB_EXTENSIONS=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +CONFIG_UNIX_SCM=y +# CONFIG_UNIX_DIAG is not set +# CONFIG_TLS is not set +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=m +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_RAW_DIAG is not set +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_FAMILY_BRIDGE=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NETFILTER_NETLINK_OSF is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +# CONFIG_NF_LOG_NETDEV is not set +# CONFIG_NF_CONNTRACK_MARK is not set +# CONFIG_NF_CONNTRACK_ZONES is not set +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CONNTRACK_LABELS is not set +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_MASQUERADE=y +# CONFIG_NF_TABLES is not set +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_NAT=m +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# end of Core Netfilter Configuration + +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +# CONFIG_NF_SOCKET_IPV4 is not set +# CONFIG_NF_TPROXY_IPV4 is not set +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_LOG_ARP is not set +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set +# end of IP: Netfilter Configuration + +# +# IPv6: Netfilter Configuration +# +# CONFIG_NF_SOCKET_IPV6 is not set +# CONFIG_NF_TPROXY_IPV6 is not set +# CONFIG_NF_DUP_IPV6 is not set +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +# CONFIG_IP6_NF_TARGET_NPT is not set +# end of IPv6: Netfilter Configuration + +CONFIG_NF_DEFRAG_IPV6=m +# CONFIG_NF_CONNTRACK_BRIDGE is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BPFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_NET_NSH is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# end of Network testing +# end of Networking options + +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_RTL=m +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set +CONFIG_BT_HCIBTUSB_BCM=y +# CONFIG_BT_HCIBTUSB_MTK is not set +CONFIG_BT_HCIBTUSB_RTL=y +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_SERDEV=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_NOKIA is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +CONFIG_BT_HCIUART_BCM=y +# CONFIG_BT_HCIUART_RTL is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_BT_ATH3K is not set +# CONFIG_BT_MTKSDIO is not set +# CONFIG_BT_MTKUART is not set +# end of Bluetooth device drivers + +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +# CONFIG_NET_9P_XEN is not set +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +# CONFIG_PSAMPLE is not set +# CONFIG_NET_IFE is not set +# CONFIG_LWTUNNEL is not set +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +CONFIG_NET_DEVLINK=y +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=y +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y +CONFIG_HAVE_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEAER_INJECT is not set +# CONFIG_PCIE_ECRC is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_PTM is not set +# CONFIG_PCIE_BW is not set +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_PF_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_LABEL=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# PCI controller drivers +# + +# +# Cadence PCIe controllers support +# +# CONFIG_PCIE_CADENCE_HOST is not set +# end of Cadence PCIe controllers support + +# CONFIG_PCI_FTPCI100 is not set +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +# CONFIG_PCIE_XILINX is not set +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_PLATFORM=y +CONFIG_PCIE_IPROC_MSI=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y +CONFIG_PCI_HOST_THUNDER_PEM=y +CONFIG_PCI_HOST_THUNDER_ECAM=y + +# +# DesignWare PCI Core Support +# +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +# CONFIG_PCIE_DW_PLAT_HOST is not set +CONFIG_PCI_HISI=y +CONFIG_PCIE_KIRIN=y +# CONFIG_PCI_MESON is not set +# CONFIG_PCIE_AL is not set +# end of DesignWare PCI Core Support +# end of PCI controller drivers + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set +# end of PCI Endpoint + +# +# PCI switch controller drivers +# +# CONFIG_PCI_SW_SWITCHTEC is not set +# end of PCI switch controller drivers + +# CONFIG_PCCARD is not set +# CONFIG_RAPIDIO is not set + +# +# Generic Driver Options +# +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# +CONFIG_FW_LOADER=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y +# CONFIG_FW_LOADER_COMPRESS is not set +# end of Firmware loader + +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_SYS_HYPERVISOR=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set +CONFIG_GENERIC_ARCH_TOPOLOGY=y +# end of Generic Driver Options + +# +# Bus devices +# +CONFIG_BRCMSTB_GISB_ARB=y +# CONFIG_MOXTET is not set +CONFIG_SIMPLE_PM_BUS=y +CONFIG_VEXPRESS_CONFIG=y +# end of Bus devices + +# CONFIG_CONNECTOR is not set +# CONFIG_GNSS is not set +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set + +# +# Partition parsers +# +# CONFIG_MTD_AR7_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# end of Partition parsers + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# end of RAM/ROM/Flash chip drivers + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set +# end of Mapping drivers for chip access + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# end of Self-contained MTD device drivers + +CONFIG_MTD_NAND_CORE=y +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set +CONFIG_MTD_RAW_NAND=y +# CONFIG_MTD_NAND_ECC_SW_BCH is not set + +# +# Raw/parallel NAND flash controllers +# +CONFIG_MTD_NAND_DENALI=y +# CONFIG_MTD_NAND_DENALI_PCI is not set +CONFIG_MTD_NAND_DENALI_DT=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_BRCMNAND is not set +# CONFIG_MTD_NAND_MXIC is not set +# CONFIG_MTD_NAND_MESON is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_PLATFORM is not set + +# +# Misc +# +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_SPI_NAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +# end of LPDDR & LPDDR2 PCM memory drivers + +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_CADENCE_QUADSPI is not set +# CONFIG_SPI_MTK_QUADSPI is not set +# CONFIG_MTD_UBI is not set +# CONFIG_MTD_HYPERBUS is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_KOBJ=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_NUMA=y +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_VIRTIO_BLK_SCSI is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set + +# +# NVME Support +# +CONFIG_NVME_CORE=m +CONFIG_BLK_DEV_NVME=m +# CONFIG_NVME_MULTIPATH is not set +# CONFIG_NVME_FC is not set +# CONFIG_NVME_TCP is not set +# CONFIG_NVME_TARGET is not set +# end of NVME Support + +# +# Misc devices +# +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_PCI_ENDPOINT_TEST is not set +# CONFIG_XILINX_SDFEC is not set +# CONFIG_PVPANIC is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_AT25=m +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +# CONFIG_EEPROM_EE1004 is not set +# end of EEPROM support + +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# end of Texas Instruments shared transport line discipline + +# CONFIG_SENSORS_LIS3_I2C is not set +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC & related support +# + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# +# CONFIG_VOP_BUS is not set + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# end of Intel MIC & related support + +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_MISC_ALCOR_PCI is not set +# CONFIG_MISC_RTSX_PCI is not set +# CONFIG_MISC_RTSX_USB is not set +# CONFIG_HABANA_AI is not set +# end of Misc devices + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SRP_ATTRS is not set +# end of SCSI Transports + +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=y +CONFIG_SCSI_HISI_SAS_PCI=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_SMARTPQI is not set +CONFIG_SCSI_UFSHCD=y +# CONFIG_SCSI_UFSHCD_PCI is not set +CONFIG_SCSI_UFSHCD_PLATFORM=y +# CONFIG_SCSI_UFS_CDNS_PLATFORM is not set +# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set +# CONFIG_SCSI_UFS_BSG is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_MYRB is not set +# CONFIG_SCSI_MYRS is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FDOMAIN_PCI is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_DH is not set +# end of SCSI device support + +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=y +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_MOBILE_LPM_POLICY=0 +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BCACHE is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +# CONFIG_DM_UNSTRIPED is not set +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_THIN_PROVISIONING is not set +# CONFIG_DM_CACHE is not set +# CONFIG_DM_WRITECACHE is not set +# CONFIG_DM_ERA is not set +# CONFIG_DM_CLONE is not set +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +# CONFIG_DM_RAID is not set +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_DUST is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_DM_FLAKEY is not set +# CONFIG_DM_VERITY is not set +# CONFIG_DM_SWITCH is not set +# CONFIG_DM_LOG_WRITES is not set +# CONFIG_DM_INTEGRITY is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# end of IEEE 1394 (FireWire) support + +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_IPVLAN is not set +CONFIG_VXLAN=m +# CONFIG_GENEVE is not set +# CONFIG_GTP is not set +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set +CONFIG_TUN=y +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# end of Distributed Switch Architecture drivers + +CONFIG_ETHERNET=y +CONFIG_MDIO=m +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALACRITECH=y +# CONFIG_SLICOSS is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +# CONFIG_ENA_ETHERNET is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=y +CONFIG_NET_VENDOR_AQUANTIA=y +# CONFIG_AQTION is not set +CONFIG_NET_VENDOR_ARC=y +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +CONFIG_ATL1C=m +# CONFIG_ALX is not set +CONFIG_NET_VENDOR_AURORA=y +# CONFIG_AURORA_NB8800 is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_TIGON3 is not set +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +CONFIG_BGMAC=y +CONFIG_BGMAC_PLATFORM=y +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNXT is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CADENCE=y +CONFIG_MACB=y +CONFIG_MACB_USE_HWSTAMP=y +# CONFIG_MACB_PCI is not set +CONFIG_NET_VENDOR_CAVIUM=y +CONFIG_THUNDER_NIC_PF=y +# CONFIG_THUNDER_NIC_VF is not set +CONFIG_THUNDER_NIC_BGX=y +CONFIG_THUNDER_NIC_RGX=y +# CONFIG_CAVIUM_PTP is not set +# CONFIG_LIQUIDIO is not set +# CONFIG_LIQUIDIO_VF is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +CONFIG_NET_VENDOR_CORTINA=y +# CONFIG_GEMINI_ETHERNET is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_GOOGLE=y +# CONFIG_GVE is not set +CONFIG_NET_VENDOR_HISILICON=y +CONFIG_HIX5HD2_GMAC=y +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_HNS3=y +CONFIG_HNS3_HCLGE=y +# CONFIG_HNS3_HCLGEVF is not set +CONFIG_HNS3_ENET=y +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +CONFIG_NET_VENDOR_HUAWEI=y +# CONFIG_HINIC is not set +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=y +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_ICE is not set +# CONFIG_FM10K is not set +# CONFIG_IGC is not set +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +CONFIG_MVMDIO=y +# CONFIG_SKGE is not set +CONFIG_SKY2=y +# CONFIG_OCTEONTX2_AF is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +CONFIG_MLX4_CORE_GEN2=y +CONFIG_MLX5_CORE=m +# CONFIG_MLX5_FPGA is not set +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +# CONFIG_MLX5_CORE_IPOIB is not set +# CONFIG_MLXSW_CORE is not set +CONFIG_MLXFW=m +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +# CONFIG_LAN743X is not set +CONFIG_NET_VENDOR_MICROSEMI=y +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +CONFIG_NET_VENDOR_NETERION=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_NETRONOME=y +# CONFIG_NFP is not set +CONFIG_NET_VENDOR_NI=y +# CONFIG_NI_XGE_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_NE2K_PCI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_VENDOR_PACKET_ENGINES=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_PENSANDO=y +# CONFIG_IONIC is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_QED is not set +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000_SPI is not set +# CONFIG_QCA7000_UART is not set +CONFIG_QCOM_EMAC=m +# CONFIG_RMNET is not set +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RENESAS=y +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SOLARFLARE=y +# CONFIG_SFC is not set +# CONFIG_SFC_FALCON is not set +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMSC911X=y +# CONFIG_SMSC9420 is not set +CONFIG_NET_VENDOR_SOCIONEXT=y +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +# CONFIG_STMMAC_SELFTESTS is not set +CONFIG_STMMAC_PLATFORM=m +# CONFIG_DWMAC_DWC_QOS_ETH is not set +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_MESON=m +# CONFIG_STMMAC_PCI is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_DWC_XLGMAC is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_PHY_SEL is not set +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BCM_IPROC is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_BCM_IPROC=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +CONFIG_MDIO_BUS_MUX_MESON_G12A=y +CONFIG_MDIO_BUS_MUX_MMIOREG=y +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set +CONFIG_MDIO_CAVIUM=y +# CONFIG_MDIO_GPIO is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_MSCC_MIIM is not set +# CONFIG_MDIO_OCTEON is not set +CONFIG_MDIO_THUNDER=y +CONFIG_PHYLINK=m +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +# CONFIG_LED_TRIGGER_PHY is not set + +# +# MII PHY device drivers +# +# CONFIG_SFP is not set +# CONFIG_ADIN_PHY is not set +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AX88796B_PHY is not set +CONFIG_AT803X_PHY=m +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_CORTINA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83822_PHY is not set +# CONFIG_DP83TC811_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +# CONFIG_MESON_GXL_PHY is not set +CONFIG_MICREL_PHY=y +CONFIG_MICROCHIP_PHY=m +# CONFIG_MICROCHIP_T1_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_NXP_TJA11XX_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_RENESAS_PHY is not set +CONFIG_ROCKCHIP_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +# CONFIG_USB_NET_AQC111 is not set +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_ADMTEK=y +# CONFIG_ADM8211 is not set +CONFIG_ATH_COMMON=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y +CONFIG_ATH10K_PCI=m +# CONFIG_ATH10K_AHB is not set +# CONFIG_ATH10K_SDIO is not set +# CONFIG_ATH10K_USB is not set +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_WCN36XX is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +# CONFIG_BRCMSMAC is not set +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_SDIO=y +# CONFIG_BRCMFMAC_USB is not set +# CONFIG_BRCMFMAC_PCIE is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PRISM54 is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_MWIFIEX=m +# CONFIG_MWIFIEX_SDIO is not set +CONFIG_MWIFIEX_PCIE=m +# CONFIG_MWIFIEX_USB is not set +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +# CONFIG_MT7601U is not set +# CONFIG_MT76x0U is not set +# CONFIG_MT76x0E is not set +# CONFIG_MT76x2E is not set +# CONFIG_MT76x2U is not set +# CONFIG_MT7603E is not set +# CONFIG_MT7615E is not set +CONFIG_WLAN_VENDOR_RALINK=y +# CONFIG_RT2X00 is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_RTL8XXXU is not set +# CONFIG_RTW88 is not set +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set +CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_ZD1211RW is not set +CONFIG_WLAN_VENDOR_QUANTENNA=y +# CONFIG_QTNFMAC_PCIE is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_VIRT_WIFI is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_VMXNET3 is not set +# CONFIG_FUJITSU_ES is not set +CONFIG_NET_FAILOVER=y +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_SPARSEKMAP is not set +CONFIG_INPUT_MATRIXKMAP=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ADC=m +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1050 is not set +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_SMBUS=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADC is not set +# CONFIG_TOUCHSCREEN_AR1021_I2C is not set +CONFIG_TOUCHSCREEN_ATMEL_MXT=m +# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX is not set +# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +# CONFIG_TOUCHSCREEN_EXC3000 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_HIDEEP is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_IPROC is not set +# CONFIG_TOUCHSCREEN_S6SY761 is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_EKTF2127 is not set +# CONFIG_TOUCHSCREEN_ELAN is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_TSC2004 is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_RM_TS is not set +# CONFIG_TOUCHSCREEN_SILEAD is not set +# CONFIG_TOUCHSCREEN_SIS_I2C is not set +# CONFIG_TOUCHSCREEN_ST1232 is not set +# CONFIG_TOUCHSCREEN_STMFTS is not set +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set +# CONFIG_TOUCHSCREEN_SX8654 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_ZET6223 is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set +# CONFIG_TOUCHSCREEN_IQS5XX is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MSM_VIBRATOR is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_GPIO_VIBRA is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_AXP20X_PEK is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_RK805_PWRKEY is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +# CONFIG_RMI4_CORE is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set +# end of Hardware I/O ports +# end of Input device support + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_NULL_TTY is not set +CONFIG_LDISC_AUTOLOAD=y +CONFIG_DEVMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_ASPEED_VUART is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set +CONFIG_SERIAL_8250_DWLIB=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_SIFIVE is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +# CONFIG_SERIAL_FSL_LINFLEXUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# end of Serial drivers + +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_DEV_BUS=y +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=y +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +CONFIG_IPMI_PLAT_DATA=y +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +# CONFIG_IPMI_SSIF is not set +# CONFIG_IPMI_WATCHDOG is not set +# CONFIG_IPMI_POWEROFF is not set +# CONFIG_IPMB_DEVICE_INTERFACE is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_IPROC_RNG200=m +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HW_RANDOM_MESON=y +CONFIG_HW_RANDOM_CAVIUM=m +CONFIG_HW_RANDOM_OPTEE=m +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y +# CONFIG_TCG_TIS is not set +# CONFIG_TCG_TIS_SPI is not set +# CONFIG_TCG_TIS_I2C_ATMEL is not set +CONFIG_TCG_TIS_I2C_INFINEON=y +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +# CONFIG_TCG_ATMEL is not set +# CONFIG_TCG_INFINEON is not set +# CONFIG_TCG_XEN is not set +# CONFIG_TCG_CRB is not set +# CONFIG_TCG_VTPM_PROXY is not set +# CONFIG_TCG_FTPM_TEE is not set +# CONFIG_TCG_TIS_ST33ZP24_I2C is not set +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set +# end of Character devices + +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_GPMUX is not set +# CONFIG_I2C_MUX_LTC4306 is not set +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +# CONFIG_I2C_MUX_MLXCPLD is not set +# end of Multiplexer I2C Chip support + +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_AMD_MP2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_NVIDIA_GPU is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_GPIO=m +# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set +# CONFIG_I2C_MESON is not set +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_RK3X=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=y +# end of I2C Hardware Bus support + +# CONFIG_I2C_STUB is not set +CONFIG_I2C_SLAVE=y +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# end of I2C support + +# CONFIG_I3C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +CONFIG_SPI_BCM_QSPI=y +CONFIG_SPI_BITBANG=m +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +CONFIG_SPI_NXP_FLEXSPI=y +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_MESON_SPICC is not set +# CONFIG_SPI_MESON_SPIFC is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX is not set +CONFIG_SPI_ROCKCHIP=y +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_SIFIVE is not set +# CONFIG_SPI_MXIC is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +CONFIG_SPMI=y +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y +CONFIG_PTP_1588_CLOCK_DTE=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +# end of PTP clock support + +CONFIG_PINCTRL=y +CONFIG_GENERIC_PINCTRL_GROUPS=y +CONFIG_PINMUX=y +CONFIG_GENERIC_PINMUX_FUNCTIONS=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_PINCTRL_AXP209 is not set +# CONFIG_PINCTRL_AMD is not set +# CONFIG_PINCTRL_MCP23S08 is not set +CONFIG_PINCTRL_SINGLE=y +# CONFIG_PINCTRL_SX150X is not set +# CONFIG_PINCTRL_STMFX is not set +CONFIG_PINCTRL_MAX77620=y +# CONFIG_PINCTRL_RK805 is not set +# CONFIG_PINCTRL_OCELOT is not set +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS2_MUX=y +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_MESON_GXBB=y +CONFIG_PINCTRL_MESON_GXL=y +CONFIG_PINCTRL_MESON8_PMX=y +CONFIG_PINCTRL_MESON_AXG=y +CONFIG_PINCTRL_MESON_AXG_PMX=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_GPIO_SYSFS is not set +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMDPT is not set +# CONFIG_GPIO_CADENCE is not set +CONFIG_GPIO_DWAPB=y +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_FTGPIO010 is not set +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_HLWD is not set +CONFIG_GPIO_MB86S7X=y +CONFIG_GPIO_PL061=y +# CONFIG_GPIO_SAMA5D2_PIOBU is not set +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_AMD_FCH is not set +# end of Memory mapped GPIO drivers + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_GW_PLD is not set +# CONFIG_GPIO_MAX7300 is not set +CONFIG_GPIO_MAX732X=y +# CONFIG_GPIO_MAX732X_IRQ is not set +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TPIC2810 is not set +# end of I2C GPIO expanders + +# +# MFD GPIO expanders +# +# CONFIG_GPIO_BD9571MWV is not set +CONFIG_GPIO_MAX77620=y +# end of MFD GPIO expanders + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_RDC321X is not set +# end of PCI GPIO expanders + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set +# end of SPI GPIO expanders + +# +# USB GPIO expanders +# +# end of USB GPIO expanders + +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_W1 is not set +CONFIG_POWER_AVS=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_BRCMSTB=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +CONFIG_REBOOT_MODE=y +CONFIG_SYSCON_REBOOT_MODE=y +# CONFIG_NVMEM_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_POWER_SUPPLY_HWMON=y +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_LEGO_EV3 is not set +CONFIG_BATTERY_SBS=m +# CONFIG_CHARGER_SBS is not set +# CONFIG_MANAGER_SBS is not set +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set +# CONFIG_AXP20X_POWER is not set +# CONFIG_AXP288_FUEL_GAUGE is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_LT3651 is not set +# CONFIG_CHARGER_DETECTOR_MAX14656 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +# CONFIG_CHARGER_CROS_USBPD is not set +# CONFIG_CHARGER_UCS1002 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_AS370 is not set +# CONFIG_SENSORS_ASC7621 is not set +CONFIG_SENSORS_ARM_SCPI=y +# CONFIG_SENSORS_ASPEED is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IBMAEM is not set +# CONFIG_SENSORS_IBMPEX is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +# CONFIG_SENSORS_OCC_P8_I2C is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +CONFIG_SENSORS_PWM_FAN=m +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set +CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_INA3221=m +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83773G is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_XGENE is not set + +# +# ACPI drivers +# +# CONFIG_SENSORS_ACPI_POWER is not set +CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +# CONFIG_DEVFREQ_THERMAL is not set +CONFIG_THERMAL_EMULATION=y +# CONFIG_THERMAL_MMIO is not set +# CONFIG_MAX77620_THERMAL is not set +CONFIG_QORIQ_THERMAL=m + +# +# Broadcom thermal drivers +# +CONFIG_BCM_NS_THERMAL=y +CONFIG_BCM_SR_THERMAL=y +# end of Broadcom thermal drivers + +# CONFIG_GENERIC_ADC_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_OPEN_TIMEOUT=0 +# CONFIG_WATCHDOG_SYSFS is not set + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +CONFIG_ARM_SP805_WATCHDOG=y +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +CONFIG_DW_WATCHDOG=y +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +# CONFIG_MESON_GXBB_WATCHDOG is not set +CONFIG_MESON_WATCHDOG=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +CONFIG_MFD_BD9571MWV=y +CONFIG_MFD_AXP20X=y +CONFIG_MFD_AXP20X_I2C=y +CONFIG_MFD_CROS_EC_DEV=y +# CONFIG_MFD_MADERA is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +CONFIG_MFD_HI6421_PMIC=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77650 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_CPCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RC5T583 is not set +CONFIG_MFD_RK808=y +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TPS68470 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TI_LP87565 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TQMX86 is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_LOCHNAGAR is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_ROHM_BD718XX=y +# CONFIG_MFD_ROHM_BD70528 is not set +# CONFIG_MFD_STPMIC1 is not set +# CONFIG_MFD_STMFX is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +# CONFIG_RAVE_SP_CORE is not set +# end of Multifunction device drivers + +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_88PG86X is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_AXP20X=y +CONFIG_REGULATOR_BD718XX=y +CONFIG_REGULATOR_BD9571MWV=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +CONFIG_REGULATOR_FAN53555=y +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_HI6421 is not set +CONFIG_REGULATOR_HI6421V530=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX77620=y +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +CONFIG_REGULATOR_MAX8973=y +# CONFIG_REGULATOR_MCP16502 is not set +# CONFIG_REGULATOR_MT6311 is not set +CONFIG_REGULATOR_PFUZE100=y +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SPMI=y +CONFIG_REGULATOR_RK808=y +# CONFIG_REGULATOR_S2MPA01 is not set +CONFIG_REGULATOR_S2MPS11=y +# CONFIG_REGULATOR_S5M8767 is not set +# CONFIG_REGULATOR_SLG51000 is not set +# CONFIG_REGULATOR_SY8106A is not set +# CONFIG_REGULATOR_SY8824X is not set +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS65132 is not set +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_REGULATOR_VCTRL=m +# CONFIG_REGULATOR_VEXPRESS is not set +CONFIG_CEC_CORE=m +CONFIG_RC_CORE=m +CONFIG_RC_MAP=m +# CONFIG_LIRC is not set +CONFIG_RC_DECODERS=y +# CONFIG_IR_NEC_DECODER is not set +# CONFIG_IR_RC5_DECODER is not set +# CONFIG_IR_RC6_DECODER is not set +# CONFIG_IR_JVC_DECODER is not set +# CONFIG_IR_SONY_DECODER is not set +# CONFIG_IR_SANYO_DECODER is not set +# CONFIG_IR_SHARP_DECODER is not set +# CONFIG_IR_MCE_KBD_DECODER is not set +# CONFIG_IR_XMP_DECODER is not set +# CONFIG_IR_IMON_DECODER is not set +# CONFIG_IR_RCMM_DECODER is not set +CONFIG_RC_DEVICES=y +# CONFIG_RC_ATI_REMOTE is not set +# CONFIG_IR_ENE is not set +# CONFIG_IR_HIX5HD2 is not set +# CONFIG_IR_IMON is not set +# CONFIG_IR_IMON_RAW is not set +# CONFIG_IR_MCEUSB is not set +# CONFIG_IR_ITE_CIR is not set +# CONFIG_IR_FINTEK is not set +# CONFIG_IR_MESON is not set +# CONFIG_IR_NUVOTON is not set +# CONFIG_IR_REDRAT3 is not set +# CONFIG_IR_STREAMZAP is not set +# CONFIG_IR_IGORPLUGUSB is not set +# CONFIG_IR_IGUANA is not set +# CONFIG_IR_TTUSBIR is not set +# CONFIG_RC_LOOPBACK is not set +# CONFIG_IR_GPIO_CIR is not set +# CONFIG_IR_SERIAL is not set +# CONFIG_IR_SIR is not set +# CONFIG_RC_XBOX_DVD is not set +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_CEC_SUPPORT is not set +# CONFIG_MEDIA_CEC_RC is not set +CONFIG_MEDIA_CONTROLLER=y +# CONFIG_MEDIA_CONTROLLER_DVB is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_I2C=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_DVB_CORE=m +# CONFIG_DVB_MMAP is not set +# CONFIG_DVB_NET is not set +CONFIG_DVB_MAX_ADAPTERS=16 +# CONFIG_DVB_DYNAMIC_MINORS is not set +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_ULE_DEBUG is not set + +# +# Media drivers +# +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_VIDEO_USBTV is not set + +# +# Analog TV USB devices +# +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_VIDEO_STK1160_COMMON is not set +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_TM6000 is not set + +# +# Digital TV USB devices +# +# CONFIG_DVB_USB is not set +# CONFIG_DVB_USB_V2 is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_SMS_USB_DRV is not set +# CONFIG_DVB_B2C2_FLEXCOP_USB is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_CADENCE is not set +# CONFIG_VIDEO_ASPEED is not set +# CONFIG_VIDEO_MUX is not set +# CONFIG_VIDEO_XILINX is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_CYPRESS_FIRMWARE is not set +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# I2C drivers hidden by 'Autoselect ancillary drivers' +# + +# +# Audio decoders, processors and mixers +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# Video encoders +# + +# +# Camera sensor devices +# + +# +# Lens drivers +# + +# +# Flash devices +# + +# +# Video improvement chips +# + +# +# Audio/Video compression chips +# + +# +# SDR tuner chips +# + +# +# Miscellaneous helper chips +# + +# +# SPI drivers hidden by 'Autoselect ancillary drivers' +# + +# +# Media SPI Adapters +# +# CONFIG_CXD2880_SPI_DRV is not set +# end of Media SPI Adapters + +CONFIG_MEDIA_TUNER=m + +# +# Tuner drivers hidden by 'Autoselect ancillary drivers' +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MC44S803=m + +# +# DVB Frontend drivers hidden by 'Autoselect ancillary drivers' +# + +# +# Multistandard (satellite) frontends +# + +# +# Multistandard (cable + terrestrial) frontends +# + +# +# DVB-S (satellite) frontends +# + +# +# DVB-T (terrestrial) frontends +# + +# +# DVB-C (cable) frontends +# + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# + +# +# ISDB-T (terrestrial) frontends +# + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# + +# +# Digital terrestrial only tuners/PLL +# + +# +# SEC control devices for DVB-S +# + +# +# Common Interface (EN50221) controller drivers +# + +# +# Tools to develop new frontends +# + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_DRM=m +CONFIG_DRM_MIPI_DSI=y +# CONFIG_DRM_DP_AUX_CHARDEV is not set +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +# CONFIG_DRM_DP_CEC is not set +CONFIG_DRM_TTM=m +CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y +CONFIG_DRM_GEM_SHMEM_HELPER=y +CONFIG_DRM_VM=y +CONFIG_DRM_SCHED=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +CONFIG_DRM_I2C_NXP_TDA998X=m +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +# end of I2C encoder or helper chips + +# +# ARM devices +# +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_KOMEDA is not set +# end of ARM devices + +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_AMDGPU is not set + +# +# ACP (Audio CoProcessor) Configuration +# +# end of ACP (Audio CoProcessor) Configuration + +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_VKMS is not set +CONFIG_DRM_ATI_PCIGART=y +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_RCAR_DW_HDMI is not set +CONFIG_DRM_RCAR_LVDS=m +CONFIG_DRM_RCAR_WRITEBACK=y +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_VIRTIO_GPU is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_ARM_VERSATILE is not set +# CONFIG_DRM_PANEL_LVDS is not set +CONFIG_DRM_PANEL_SIMPLE=m +# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set +# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set +# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set +# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set +# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set +# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set +# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set +# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set +# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set +# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set +# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DRM_PANEL_TPO_TPG110 is not set +# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set +# end of Display Panels + +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_CDNS_DSI is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +# CONFIG_DRM_LVDS_ENCODER is not set +# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SIL_SII8620 is not set +CONFIG_DRM_SII902X=m +# CONFIG_DRM_SII9234 is not set +# CONFIG_DRM_THINE_THC63LVD1024 is not set +# CONFIG_DRM_TOSHIBA_TC358764 is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +# CONFIG_DRM_TI_TFP410 is not set +# CONFIG_DRM_TI_SN65DSI86 is not set +CONFIG_DRM_I2C_ADV7511=m +# CONFIG_DRM_I2C_ADV7511_AUDIO is not set +CONFIG_DRM_I2C_ADV7533=y +CONFIG_DRM_I2C_ADV7511_CEC=y +CONFIG_DRM_DW_HDMI=m +# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set +CONFIG_DRM_DW_HDMI_I2S_AUDIO=m +# CONFIG_DRM_DW_HDMI_CEC is not set +# end of Display Interface Bridges + +CONFIG_DRM_ETNAVIV=m +CONFIG_DRM_ETNAVIV_THERMAL=y +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_HIBMC=m +CONFIG_DRM_HISI_KIRIN=m +# CONFIG_DRM_MXSFB is not set +CONFIG_DRM_MESON=m +CONFIG_DRM_MESON_DW_HDMI=m +# CONFIG_DRM_GM12U320 is not set +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set +CONFIG_DRM_PL111=m +# CONFIG_DRM_XEN is not set +CONFIG_DRM_LIMA=m +CONFIG_DRM_PANFROST=m +CONFIG_DRM_LEGACY=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y + +# +# Frame buffer Devices +# +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_ARMCLCD is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_EFI=y +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_XEN_FBDEV_FRONTEND=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SM712 is not set +# end of Frame buffer Devices + +# +# Backlight & LCD device support +# +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_PWM=m +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +# end of Backlight & LCD device support + +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +# end of Console display driver support + +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# end of Graphics support + +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +# CONFIG_SND_OSSEMUL is not set +CONFIG_SND_PCM_TIMER=y +# CONFIG_SND_HRTIMER is not set +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +# end of HD-Audio + +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_VARIAX is not set +CONFIG_SND_SOC=y +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_AUDMIX is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# end of SoC Audio for Freescale CPUs + +# CONFIG_SND_I2S_HI6210_I2S is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_MTK_BTCVSD is not set + +# +# ASoC support for Amlogic platforms +# +# CONFIG_SND_MESON_AXG_FRDDR is not set +# CONFIG_SND_MESON_AXG_TODDR is not set +# CONFIG_SND_MESON_AXG_TDMIN is not set +# CONFIG_SND_MESON_AXG_TDMOUT is not set +# CONFIG_SND_MESON_AXG_SOUND_CARD is not set +# CONFIG_SND_MESON_AXG_SPDIFOUT is not set +# CONFIG_SND_MESON_AXG_SPDIFIN is not set +# CONFIG_SND_MESON_AXG_PDM is not set +# CONFIG_SND_MESON_G12A_TOHDMITX is not set +# end of ASoC support for Amlogic platforms + +# CONFIG_SND_SOC_SOF_TOPLEVEL is not set + +# +# STMicroelectronics STM32 SOC audio support +# +# end of STMicroelectronics STM32 SOC audio support + +# CONFIG_SND_SOC_XILINX_I2S is not set +# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set +# CONFIG_SND_SOC_XILINX_SPDIF is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +# CONFIG_ZX_TDM is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU1761_I2C is not set +# CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4118 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set +CONFIG_SND_SOC_AK4613=m +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_AK5558 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BD28623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CROS_EC_CODEC is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS35L34 is not set +# CONFIG_SND_SOC_CS35L35 is not set +# CONFIG_SND_SOC_CS35L36 is not set +# CONFIG_SND_SOC_CS42L42 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS43130 is not set +# CONFIG_SND_SOC_CS4341 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +# CONFIG_SND_SOC_CX2072X is not set +CONFIG_SND_SOC_DMIC=m +CONFIG_SND_SOC_HDMI_CODEC=m +CONFIG_SND_SOC_ES7134=m +CONFIG_SND_SOC_ES7241=m +# CONFIG_SND_SOC_ES8316 is not set +# CONFIG_SND_SOC_ES8328_I2C is not set +# CONFIG_SND_SOC_ES8328_SPI is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_MAX98088 is not set +CONFIG_SND_SOC_MAX98357A=m +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9867 is not set +# CONFIG_SND_SOC_MAX98927 is not set +# CONFIG_SND_SOC_MAX98373 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1789_I2C is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM186X_I2C is not set +# CONFIG_SND_SOC_PCM186X_SPI is not set +# CONFIG_SND_SOC_PCM3060_I2C is not set +# CONFIG_SND_SOC_PCM3060_SPI is not set +CONFIG_SND_SOC_PCM3168A=m +CONFIG_SND_SOC_PCM3168A_I2C=m +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RK3328 is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +CONFIG_SND_SOC_SPDIF=m +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +CONFIG_SND_SOC_TAS571X=m +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TAS6424 is not set +# CONFIG_SND_SOC_TDA7419 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_TSCS42XX is not set +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_UDA1334 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8524 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +# CONFIG_SND_SOC_MAX9759 is not set +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_MT6358 is not set +# CONFIG_SND_SOC_NAU8540 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_NAU8822 is not set +# CONFIG_SND_SOC_NAU8824 is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +# end of CODEC drivers + +CONFIG_SND_SIMPLE_CARD_UTILS=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_AUDIO_GRAPH_CARD=m +# CONFIG_SND_XEN_FRONTEND is not set + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACCUTOUCH is not set +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_ASUS is not set +# CONFIG_HID_AUREAL is not set +CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +# CONFIG_HID_BIGBEN_FF is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_COUGAR is not set +# CONFIG_HID_MACALLY is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CREATIVE_SB0540 is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELAN is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_VIEWSONIC is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +CONFIG_HID_ITE=y +# CONFIG_HID_JABRA is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set +CONFIG_HID_LOGITECH=y +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MALTRON is not set +# CONFIG_HID_MAYFLASH is not set +CONFIG_HID_REDRAGON=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTI is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_RETRODE is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEAM is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_UDRAW_PS3 is not set +# CONFIG_HID_U2FZERO is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set +# end of Special HID drivers + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set +# end of USB HID support + +# +# I2C HID support +# +CONFIG_I2C_HID=m +# end of I2C HID support +# end of HID support + +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +# CONFIG_USB_LED_TRIG is not set +CONFIG_USB_ULPI_BUS=y +# CONFIG_USB_CONN_GPIO is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_PCI=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +CONFIG_USB_AUTOSUSPEND_DELAY=2 +# CONFIG_USB_MON is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_DBGCAP is not set +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +CONFIG_USB_UAS=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_CDNS3 is not set +CONFIG_USB_MUSB_HDRC=y +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_GADGET is not set +CONFIG_USB_MUSB_DUAL_ROLE=y + +# +# Platform Glue Layer +# + +# +# MUSB DMA mode +# +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_ULPI is not set +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_PCI=y +CONFIG_USB_DWC3_HAPS=y +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_HOST is not set + +# +# Gadget/Dual-role mode requires USB Gadget support to be enabled +# +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_DUAL_ROLE=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_PCI=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1761_UDC=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set +# CONFIG_USB_ISP1760_GADGET_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +# CONFIG_USB_HUB_USB251XB is not set +CONFIG_USB_HSIC_USB3503=y +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +# end of USB Physical Layer drivers + +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +CONFIG_USB_SNP_CORE=y +CONFIG_USB_SNP_UDC_PLAT=y +# CONFIG_USB_M66592 is not set +CONFIG_USB_BDC_UDC=y + +# +# Platform Support +# +CONFIG_USB_BDC_PCI=y +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +# end of USB Peripheral Controller + +# CONFIG_USB_CONFIGFS is not set +CONFIG_TYPEC=m +# CONFIG_TYPEC_TCPM is not set +# CONFIG_TYPEC_UCSI is not set +# CONFIG_TYPEC_TPS6598X is not set + +# +# USB Type-C Multiplexer/DeMultiplexer Switch support +# +# CONFIG_TYPEC_MUX_PI3USB30532 is not set +# end of USB Type-C Multiplexer/DeMultiplexer Switch support + +# +# USB Type-C Alternate Mode drivers +# +# CONFIG_TYPEC_DP_ALTMODE is not set +# end of USB Type-C Alternate Mode drivers + +CONFIG_USB_ROLE_SWITCH=y +CONFIG_MMC=y +CONFIG_PWRSEQ_EMMC=y +# CONFIG_PWRSEQ_SD8787 is not set +CONFIG_PWRSEQ_SIMPLE=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_STM32_SDMMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_OF_ARASAN=y +# CONFIG_MMC_SDHCI_OF_ASPEED is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set +CONFIG_MMC_SDHCI_CADENCE=y +CONFIG_MMC_SDHCI_F_SDH30=y +CONFIG_MMC_SDHCI_IPROC=y +CONFIG_MMC_MESON_GX=y +# CONFIG_MMC_MESON_MX_SDIO is not set +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_SPI=y +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=y +CONFIG_MMC_DW_PLTFM=y +# CONFIG_MMC_DW_BLUEFIELD is not set +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_HI3798CV200=y +CONFIG_MMC_DW_K3=y +# CONFIG_MMC_DW_PCI is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_CQHCI=y +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +CONFIG_MMC_SDHCI_XENON=y +# CONFIG_MMC_SDHCI_OMAP is not set +# CONFIG_MMC_SDHCI_AM654 is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set + +# +# LED drivers +# +# CONFIG_LEDS_AN30259A is not set +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_CR0014114 is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3532 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +CONFIG_LEDS_PWM=y +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +CONFIG_LEDS_SYSCON=y +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_USER is not set +# CONFIG_LEDS_SPI_BYTE is not set +# CONFIG_LEDS_TI_LMU_COMMON is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +CONFIG_LEDS_TRIGGER_DISK=y +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +CONFIG_LEDS_TRIGGER_PANIC=y +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_LEDS_TRIGGER_PATTERN is not set +# CONFIG_LEDS_TRIGGER_AUDIO is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC_SUPPORT=y +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_GHES=y +# CONFIG_EDAC_THUNDERX is not set +# CONFIG_EDAC_XGENE is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABEOZ9 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_MESON_VRTC=m +CONFIG_RTC_DRV_RK808=m +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_ISL12026 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF85363 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8010 is not set +CONFIG_RTC_DRV_RX8581=m +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV3028 is not set +# CONFIG_RTC_DRV_RV8803 is not set +CONFIG_RTC_DRV_S5M=y +# CONFIG_RTC_DRV_SD3078 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=y +CONFIG_RTC_DRV_DS3232_HWMON=y +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set +CONFIG_RTC_DRV_EFI=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_ZYNQMP is not set +CONFIG_RTC_DRV_CROS_EC=y + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +# CONFIG_RTC_DRV_CADENCE is not set +# CONFIG_RTC_DRV_FTRTC010 is not set +CONFIG_RTC_DRV_SNVS=m +# CONFIG_RTC_DRV_R7301 is not set + +# +# HID Sensor RTC drivers +# +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_ALTERA_MSGDMA is not set +# CONFIG_AMBA_PL08X is not set +CONFIG_BCM_SBA_RAID=m +# CONFIG_DW_AXI_DMAC is not set +CONFIG_FSL_EDMA=y +# CONFIG_FSL_QDMA is not set +# CONFIG_INTEL_IDMA64 is not set +CONFIG_MV_XOR_V2=y +CONFIG_PL330_DMA=y +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +# CONFIG_DW_EDMA is not set +# CONFIG_DW_EDMA_PCIE is not set + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +CONFIG_DMA_ENGINE_RAID=y + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set +# end of DMABUF options + +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +CONFIG_VFIO_IOMMU_TYPE1=y +CONFIG_VFIO_VIRQFD=y +CONFIG_VFIO=y +# CONFIG_VFIO_NOIOMMU is not set +CONFIG_VFIO_PCI=y +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PLATFORM is not set +# CONFIG_VFIO_MDEV is not set +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y +CONFIG_VIRTIO_MENU=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# +# end of Microsoft Hyper-V guest support + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y +CONFIG_XEN_DEV_EVTCHN=y +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +# CONFIG_XEN_GRANT_DMA_ALLOC is not set +CONFIG_SWIOTLB_XEN=y +# CONFIG_XEN_PVCALLS_FRONTEND is not set +# CONFIG_XEN_PVCALLS_BACKEND is not set +CONFIG_XEN_PRIVCMD=y +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +# end of Xen driver support + +# CONFIG_GREYBUS is not set +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_MFD_CROS_EC=y +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CHROMEOS_TBMC is not set +CONFIG_CROS_EC=y +CONFIG_CROS_EC_I2C=y +# CONFIG_CROS_EC_RPMSG is not set +CONFIG_CROS_EC_SPI=y +CONFIG_CROS_EC_PROTO=y +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CROS_EC_CHARDEV=y +CONFIG_CROS_EC_LIGHTBAR=y +CONFIG_CROS_EC_VBC=y +CONFIG_CROS_EC_SYSFS=y +# CONFIG_MELLANOX_PLATFORM is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_CLK_HSDK is not set +# CONFIG_COMMON_CLK_MAX77686 is not set +# CONFIG_COMMON_CLK_MAX9485 is not set +CONFIG_COMMON_CLK_RK808=y +CONFIG_COMMON_CLK_SCPI=y +# CONFIG_COMMON_CLK_SI5341 is not set +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_XGENE=y +CONFIG_COMMON_CLK_PWM=y +# CONFIG_COMMON_CLK_VC5 is not set +# CONFIG_COMMON_CLK_BD718XX is not set +# CONFIG_COMMON_CLK_FIXED_MMIO is not set +CONFIG_COMMON_CLK_IPROC=y +CONFIG_CLK_BCM_NS2=y +CONFIG_CLK_BCM_SR=y +CONFIG_COMMON_CLK_MESON_REGMAP=y +CONFIG_COMMON_CLK_MESON_DUALDIV=y +CONFIG_COMMON_CLK_MESON_MPLL=y +CONFIG_COMMON_CLK_MESON_PLL=y +CONFIG_COMMON_CLK_MESON_VID_PLL_DIV=y +CONFIG_COMMON_CLK_MESON_AO_CLKC=y +CONFIG_COMMON_CLK_MESON_EE_CLKC=y +CONFIG_COMMON_CLK_MESON_CPU_DYNDIV=y +CONFIG_COMMON_CLK_GXBB=y +CONFIG_COMMON_CLK_AXG=y +# CONFIG_COMMON_CLK_AXG_AUDIO is not set +CONFIG_COMMON_CLK_G12A=y +# end of Common Clock Framework + +CONFIG_HWSPINLOCK=y + +# +# Clock Source drivers +# +CONFIG_TIMER_OF=y +CONFIG_TIMER_ACPI=y +CONFIG_TIMER_PROBE=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_HISILICON_ERRATUM_161010101=y +CONFIG_ARM64_ERRATUM_858921=y +CONFIG_CLKSRC_VERSATILE=y +# end of Clock Source drivers + +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=y +CONFIG_PLATFORM_MHU=y +# CONFIG_PL320_MBOX is not set +CONFIG_PCC=y +# CONFIG_ALTERA_MBOX is not set +# CONFIG_MAILBOX_TEST is not set +# CONFIG_BCM_PDC_MBOX is not set +CONFIG_BCM_FLEXRM_MBOX=m +CONFIG_IOMMU_IOVA=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# end of Generic IOMMU Pagetable Support + +# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y +CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y +CONFIG_ARM_SMMU_V3=y +# CONFIG_VIRTIO_IOMMU is not set + +# +# Remoteproc drivers +# +CONFIG_REMOTEPROC=y +# end of Remoteproc drivers + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y +# CONFIG_RPMSG_CHAR is not set +CONFIG_RPMSG_QCOM_GLINK_NATIVE=y +CONFIG_RPMSG_QCOM_GLINK_RPM=y +# CONFIG_RPMSG_VIRTIO is not set +# end of Rpmsg drivers + +# CONFIG_SOUNDWIRE is not set + +# +# SOC (System On Chip) specific Drivers +# + +# +# Amlogic SoC drivers +# +CONFIG_MESON_CANVAS=m +CONFIG_MESON_CLK_MEASURE=y +CONFIG_MESON_GX_SOCINFO=y +CONFIG_MESON_GX_PM_DOMAINS=y +CONFIG_MESON_EE_PM_DOMAINS=y +CONFIG_MESON_MX_SOCINFO=y +# end of Amlogic SoC drivers + +# +# Aspeed SoC drivers +# +# end of Aspeed SoC drivers + +# +# Broadcom SoC drivers +# +CONFIG_SOC_BRCMSTB=y +# end of Broadcom SoC drivers + +# +# NXP/Freescale QorIQ SoC drivers +# +# end of NXP/Freescale QorIQ SoC drivers + +# +# i.MX SoC drivers +# +# end of i.MX SoC drivers + +# +# Qualcomm SoC drivers +# +# end of Qualcomm SoC drivers + +CONFIG_SOC_TI=y + +# +# Xilinx SoC drivers +# +# CONFIG_XILINX_VCU is not set +# end of Xilinx SoC drivers +# end of SOC (System On Chip) specific Drivers + +CONFIG_PM_DEVFREQ=y + +# +# DEVFREQ Governors +# +CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set +# CONFIG_DEVFREQ_GOV_POWERSAVE is not set +# CONFIG_DEVFREQ_GOV_USERSPACE is not set +# CONFIG_DEVFREQ_GOV_PASSIVE is not set + +# +# DEVFREQ Drivers +# +# CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_FSA9480 is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_PTN5150 is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +CONFIG_EXTCON_USBC_CROS_EC=y +CONFIG_MEMORY=y +# CONFIG_ARM_PL172_MPMC is not set +CONFIG_IIO=y +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +# CONFIG_IIO_BUFFER_HW_CONSUMER is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +# CONFIG_IIO_CONFIGFS is not set +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADXL345_I2C is not set +# CONFIG_ADXL345_SPI is not set +# CONFIG_ADXL372_SPI is not set +# CONFIG_ADXL372_I2C is not set +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DA280 is not set +# CONFIG_DA311 is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_DMARD10 is not set +# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_SCA3000 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set +# end of Accelerometers + +# +# Analog to digital converters +# +# CONFIG_AD7124 is not set +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7606_IFACE_PARALLEL is not set +# CONFIG_AD7606_IFACE_SPI is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7768_1 is not set +# CONFIG_AD7780 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD7949 is not set +# CONFIG_AD799X is not set +# CONFIG_AXP20X_ADC is not set +# CONFIG_AXP288_ADC is not set +# CONFIG_BCM_IPROC_ADC is not set +# CONFIG_CC10001_ADC is not set +# CONFIG_ENVELOPE_DETECTOR is not set +# CONFIG_HI8435 is not set +# CONFIG_HX711 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2471 is not set +# CONFIG_LTC2485 is not set +# CONFIG_LTC2497 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MAX9611 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MCP3911 is not set +CONFIG_MESON_SARADC=y +# CONFIG_NAU7802 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_QCOM_SPMI_ADC5 is not set +# CONFIG_SD_ADC_MODULATOR is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_ADS8344 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_TI_ADS124S08 is not set +# CONFIG_TI_TLC4541 is not set +# CONFIG_VF610_ADC is not set +# CONFIG_XILINX_XADC is not set +# end of Analog to digital converters + +# +# Analog Front Ends +# +# CONFIG_IIO_RESCALE is not set +# end of Analog Front Ends + +# +# Amplifiers +# +# CONFIG_AD8366 is not set +# end of Amplifiers + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_BME680 is not set +# CONFIG_CCS811 is not set +# CONFIG_IAQCORE is not set +# CONFIG_PMS7003 is not set +# CONFIG_SENSIRION_SGP30 is not set +# CONFIG_SPS30 is not set +# CONFIG_VZ89X is not set +# end of Chemical Sensors + +CONFIG_IIO_CROS_EC_SENSORS_CORE=m +CONFIG_IIO_CROS_EC_SENSORS=m +# CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE is not set + +# +# Hid Sensor IIO Common +# +# end of Hid Sensor IIO Common + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set +# end of SSP Sensor Common + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_LTC1660 is not set +# CONFIG_LTC2632 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_DPOT_DAC is not set +# CONFIG_DS4424 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set +# CONFIG_TI_DAC7311 is not set +# CONFIG_TI_DAC7612 is not set +# CONFIG_VF610_DAC is not set +# end of Digital to analog converters + +# +# IIO dummy driver +# +# end of IIO dummy driver + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set +# end of Clock Generator/Distribution + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set +# CONFIG_ADF4371 is not set +# end of Phase-Locked Loop (PLL) frequency synthesizers +# end of Frequency Synthesizers DDS/PLL + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +# CONFIG_FXAS21002C is not set +# CONFIG_MPU3050_I2C is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set +# end of Digital gyroscope sensors + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set +# end of Heart Rate Monitors +# end of Health Sensors + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +# CONFIG_HTS221 is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set +# end of Humidity sensors + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IIO_ST_LSM6DSX is not set +# end of Inertial measurement units + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM3605 is not set +# CONFIG_CM36651 is not set +CONFIG_IIO_CROS_EC_LIGHT_PROX=m +# CONFIG_GP2AP020A00F is not set +CONFIG_SENSORS_ISL29018=m +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_ISL29125 is not set +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_LV0104CS is not set +# CONFIG_MAX44000 is not set +# CONFIG_MAX44009 is not set +# CONFIG_NOA1305 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1133 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_ST_UVIS25 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VCNL4035 is not set +# CONFIG_VEML6070 is not set +# CONFIG_VL6180 is not set +# CONFIG_ZOPT2201 is not set +# end of Light sensors + +# +# Magnetometer sensors +# +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set +# CONFIG_SENSORS_RM3100_I2C is not set +# CONFIG_SENSORS_RM3100_SPI is not set +# end of Magnetometer sensors + +# +# Multiplexers +# +# CONFIG_IIO_MUX is not set +# end of Multiplexers + +# +# Inclinometer sensors +# +# end of Inclinometer sensors + +# +# Triggers - standalone +# +# CONFIG_IIO_INTERRUPT_TRIGGER is not set +# CONFIG_IIO_SYSFS_TRIGGER is not set +# end of Triggers - standalone + +# +# Digital potentiometers +# +# CONFIG_AD5272 is not set +# CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4018 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_MCP41010 is not set +# CONFIG_TPL0102 is not set +# end of Digital potentiometers + +# +# Digital potentiostats +# +# CONFIG_LMP91000 is not set +# end of Digital potentiostats + +# +# Pressure sensors +# +# CONFIG_ABP060MG is not set +# CONFIG_BMP280 is not set +CONFIG_IIO_CROS_EC_BARO=m +# CONFIG_DPS310 is not set +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +CONFIG_MPL3115=m +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set +# end of Pressure sensors + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set +# end of Lightning sensors + +# +# Proximity and distance sensors +# +# CONFIG_ISL29501 is not set +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_MB1232 is not set +# CONFIG_RFD77402 is not set +# CONFIG_SRF04 is not set +# CONFIG_SX9500 is not set +# CONFIG_SRF08 is not set +# CONFIG_VL53L0X_I2C is not set +# end of Proximity and distance sensors + +# +# Resolver to digital converters +# +# CONFIG_AD2S90 is not set +# CONFIG_AD2S1200 is not set +# end of Resolver to digital converters + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +# CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set +# CONFIG_TMP006 is not set +# CONFIG_TMP007 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_MAX31856 is not set +# end of Temperature sensors + +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +CONFIG_PWM_BCM_IPROC=y +CONFIG_PWM_CROS_EC=m +# CONFIG_PWM_FSL_FTM is not set +CONFIG_PWM_MESON=y +# CONFIG_PWM_PCA9685 is not set + +# +# IRQ chip support +# +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +# CONFIG_AL_FIC is not set +CONFIG_PARTITION_PERCPU=y +CONFIG_MESON_IRQ_GPIO=y +# end of IRQ chip support + +# CONFIG_IPACK_BUS is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_MESON=y +# CONFIG_RESET_MESON_AUDIO_ARB is not set +# CONFIG_RESET_TI_SYSCON is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +CONFIG_PHY_XGENE=y +CONFIG_PHY_MESON8B_USB2=y +CONFIG_PHY_MESON_GXL_USB2=y +CONFIG_PHY_MESON_GXL_USB3=y +CONFIG_PHY_MESON_G12A_USB2=y +CONFIG_PHY_MESON_G12A_USB3_PCIE=y +CONFIG_PHY_BCM_SR_USB=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +CONFIG_PHY_NS2_PCIE=y +CONFIG_PHY_NS2_USB_DRD=y +CONFIG_PHY_BRCM_SATA=y +CONFIG_PHY_BCM_SR_PCIE=y +# CONFIG_PHY_CADENCE_DP is not set +# CONFIG_PHY_CADENCE_DPHY is not set +# CONFIG_PHY_CADENCE_SIERRA is not set +CONFIG_PHY_FSL_IMX8MQ_USB=y +# CONFIG_PHY_MIXEL_MIPI_DPHY is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_CPCAP_USB is not set +# CONFIG_PHY_MAPPHONE_MDM6600 is not set +# CONFIG_PHY_OCELOT_SERDES is not set +CONFIG_PHY_QCOM_USB_HS=y +# CONFIG_PHY_QCOM_USB_HSIC is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_TUSB1210 is not set +# end of PHY Subsystem + +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +# CONFIG_ARM_CCI_PMU is not set +# CONFIG_ARM_CCN is not set +CONFIG_ARM_PMU=y +CONFIG_ARM_PMU_ACPI=y +# CONFIG_ARM_SMMU_V3_PMU is not set +# CONFIG_ARM_DSU_PMU is not set +CONFIG_HISI_PMU=y +# CONFIG_ARM_SPE_PMU is not set +# end of Performance monitor support + +CONFIG_RAS=y + +# +# Android +# +# CONFIG_ANDROID is not set +# end of Android + +# CONFIG_LIBNVDIMM is not set +# CONFIG_DAX is not set +CONFIG_NVMEM=y +CONFIG_NVMEM_SYSFS=y +CONFIG_NVMEM_BCM_OCOTP=y +# CONFIG_MESON_EFUSE is not set +# CONFIG_MESON_MX_EFUSE is not set + +# +# HW tracing support +# +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set +# end of HW tracing support + +CONFIG_FPGA=y +# CONFIG_ALTERA_PR_IP_CORE is not set +# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set +# CONFIG_FPGA_MGR_ALTERA_CVP is not set +# CONFIG_FPGA_MGR_XILINX_SPI is not set +# CONFIG_FPGA_MGR_ICE40_SPI is not set +# CONFIG_FPGA_MGR_MACHXO2_SPI is not set +CONFIG_FPGA_BRIDGE=m +CONFIG_ALTERA_FREEZE_BRIDGE=m +# CONFIG_XILINX_PR_DECOUPLER is not set +CONFIG_FPGA_REGION=m +CONFIG_OF_FPGA_REGION=m +# CONFIG_FPGA_DFL is not set +# CONFIG_FSI is not set +CONFIG_TEE=y + +# +# TEE drivers +# +CONFIG_OPTEE=y +CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 +# end of TEE drivers + +CONFIG_PM_OPP=y +# CONFIG_SIOX is not set +# CONFIG_SLIMBUS is not set +# CONFIG_INTERCONNECT is not set +# CONFIG_COUNTER is not set +# end of Device Drivers + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_VALIDATE_FS_PARSER is not set +CONFIG_FS_IOMAP=y +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_BTRFS_FS_REF_VERIFY is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_FS_DAX is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +# CONFIG_FS_VERITY is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +# CONFIG_VIRTIO_FS is not set +CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set +# end of Caches + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set +# end of CD-ROM/DVD Filesystems + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set +# end of DOS/FAT/NT Filesystems + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_VMCORE=y +# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROC_CHILDREN is not set +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +# end of Pseudo filesystems + +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_PSTORE=y +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_RAM is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_EROFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=y +# CONFIG_9P_FS_POSIX_ACL is not set +# CONFIG_9P_FS_SECURITY is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_UNICODE is not set +# end of File systems + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_COMPAT=y +# CONFIG_KEYS_REQUEST_CACHE is not set +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_TRUSTED_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +# CONFIG_HARDENED_USERCOPY is not set +# CONFIG_FORTIFY_SOURCE is not set +# CONFIG_STATIC_USERMODEHELPER is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_YAMA is not set +# CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" + +# +# Kernel hardening options +# + +# +# Memory initialization +# +CONFIG_INIT_STACK_NONE=y +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +# end of Memory initialization +# end of Kernel hardening options +# end of Security options + +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y +CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_ENGINE=m + +# +# Public-key cryptography +# +CONFIG_CRYPTO_RSA=y +# CONFIG_CRYPTO_DH is not set +CONFIG_CRYPTO_ECC=m +CONFIG_CRYPTO_ECDH=m +# CONFIG_CRYPTO_ECRDSA is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_AEGIS128 is not set +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_ECHAINIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CFB is not set +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_OFB is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set +# CONFIG_CRYPTO_ADIANTUM is not set +# CONFIG_CRYPTO_ESSIV is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_XXHASH is not set +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_LIB_SHA256=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m +# CONFIG_CRYPTO_STREEBOG is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_TI is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_LIB_ARC4=m +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_LIB_DES=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_CHACHA20=m +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SM4 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ZSTD is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set +# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set +# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set +CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_CRYPTO_DEV_BCM_SPU=m +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set +# CONFIG_CRYPTO_DEV_CCREE is not set +# CONFIG_CRYPTO_DEV_HISI_SEC is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set + +# +# Certificates for signature checking +# +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set +# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set +# end of Certificates for signature checking + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_RAID6_PQ_BENCHMARK=y +# CONFIG_PACKING is not set +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +# CONFIG_CORDIC is not set +CONFIG_RATIONAL=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_INDIRECT_PIO=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +# CONFIG_CRC64 is not set +# CONFIG_CRC4 is not set +CONFIG_CRC7=y +CONFIG_LIBCRC32C=m +# CONFIG_CRC8 is not set +CONFIG_XXHASH=y +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_ZSTD_COMPRESS=m +CONFIG_ZSTD_DECOMPRESS=m +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_XARRAY_MULTI=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DMA_DECLARE_COHERENT=y +CONFIG_ARCH_HAS_SETUP_DMA_OPS=y +CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y +CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y +CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y +CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y +CONFIG_SWIOTLB=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +# CONFIG_DMA_API_DEBUG is not set +CONFIG_SGL_ALLOC=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_CLZ_TAB=y +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_DIMLIB=y +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_HAVE_GENERIC_VDSO=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_SG_POOL=y +CONFIG_SBITMAP=y +# CONFIG_STRING_SELFTEST is not set +# end of Library routines + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_CALLER is not set +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# end of printk and dmesg options + +# +# Compile-time checks and compiler options +# +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_INSTALL is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# end of Compile-time checks and compiler options + +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +# CONFIG_DEBUG_KERNEL is not set + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y +CONFIG_CC_HAS_KASAN_GENERIC=y +# CONFIG_KASAN is not set +CONFIG_KASAN_STACK=1 +# end of Memory Debugging + +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set + +# +# Debug Lockups and Hangs +# +# end of Debug Lockups and Hangs + +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_INFO=y +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_WW_MUTEX_SELFTEST is not set +# end of Lock Debugging (spinlocks, mutexes, etc...) + +# CONFIG_STACKTRACE is not set +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y + +# +# RCU Debugging +# +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# end of RCU Debugging + +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_REED_SOLOMON_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_STRSCPY is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_XARRAY is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_VMALLOC is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_BLACKHOLE_DEV is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_TEST_MEMCAT_P is not set +# CONFIG_TEST_STACKINIT is not set +# CONFIG_TEST_MEMINIT is not set +CONFIG_MEMTEST=y +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +# CONFIG_IO_STRICT_DEVMEM is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +# CONFIG_DEBUG_WX is not set +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_ARM64_RELOC_TEST is not set +# CONFIG_CORESIGHT is not set +# end of Kernel hacking diff --git a/buildroot-external/board/hardkernel/odroid-n2/meta b/buildroot-external/board/hardkernel/odroid-n2/meta new file mode 100644 index 000000000..fcf5c544b --- /dev/null +++ b/buildroot-external/board/hardkernel/odroid-n2/meta @@ -0,0 +1,7 @@ +BOARD_ID=odroid-n2 +BOARD_NAME="Hardkernel Odroid-N2" +CHASSIS=embedded +BOOTLOADER=uboot +KERNEL_FILE=Image +BOOT_SYS=mbr +BOOT_ENV_SIZE=0x2000 diff --git a/buildroot-external/board/orangepi/prime/uboot-boot.ush b/buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush similarity index 51% rename from buildroot-external/board/orangepi/prime/uboot-boot.ush rename to buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush index 920a2d090..230a2252a 100644 --- a/buildroot-external/board/orangepi/prime/uboot-boot.ush +++ b/buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush @@ -1,51 +1,57 @@ -part start mmc ${devnum} 6 mmc_env +########################################### + +part start mmc ${devnum} 9 mmc_env mmc dev ${devnum} setenv loadbootstate " \ echo 'loading env...'; \ - mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \ - env import -c ${ramdisk_addr_r} 0x8000;" + mmc read ${ramdisk_addr_r} ${mmc_env} 0x10; \ + env import -c ${ramdisk_addr_r} 0x2000;" setenv storebootstate " \ echo 'storing env...'; \ - env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \ - mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;" + env export -c -s 0x2000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \ + mmc write ${ramdisk_addr_r} ${mmc_env} 0x10;" run loadbootstate test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B" test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3 test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3 -# HassOS bootargs -setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory rootwait" - -# HassOS system A/B -setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro" -setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro" - -# Load extraargs -fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline - -# Load device tree -fatload mmc ${devnum}:1 ${fdt_addr_r} sun50i-h5-orangepi-prime.dtb -fdt addr ${fdt_addr_r} - if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then env import -t ${ramdisk_addr_r} ${filesize}; fi -if test "${i2c0_enable}" != "false"; then - fdt set /soc/i2c@1c2ac00 status "okay" -fi +# Board bootargs +if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi + +# Boot Args +setenv bootargs_odroidn2 "clk_ignore_unused hdmimode=${hdmimode} cvbsmode=576cvbs max_freq_a53=${max_freq_a53} max_freq_a73=${max_freq_a73} maxcpus=${maxcpus} ${cmode} voutmode=${voutmode} disablehpd=${disablehpd} overscan=${overscan}" -if test "${i2c1_enable}" != "false"; then - fdt set /soc/i2c@1c2b000 status "okay" -fi +# HassOS bootargs +setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory" -if test "${i2c2_enable}" != "false"; then - fdt set /soc/i2c@1c2b400 status "okay" -fi +# HassOS system A/B +setenv bootargs_a "root=PARTUUID=48617373-06 rootfstype=squashfs ro rootwait" +setenv bootargs_b "root=PARTUUID=48617373-08 rootfstype=squashfs ro rootwait" +usb start + +# Load extraargs +fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline +fatload mmc ${devnum}:1 ${fdt_addr_r} meson-g12b-odroid-n2.dtb +#fdt addr ${fdt_addr_r} + +# logical volumes get numbered after physical ones. +# 1. boot +# 2. Extended partition +# 3. Overlay +# 4. Data +# 5. KernelA +# 6. SystemA +# 7. KernelB +# 8. SystemB +# 9. BootInfo setenv bootargs for BOOT_SLOT in "${BOOT_ORDER}"; do if test "x${bootargs}" != "x"; then @@ -54,15 +60,15 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do if test ${BOOT_A_LEFT} -gt 0; then setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1 echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining" - setenv load_kernel "ext4load mmc ${devnum}:2 ${kernel_addr_r} Image" - setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}" + setenv load_kernel "ext4load mmc ${devnum}:5 ${kernel_addr_r} Image" + setenv bootargs "${bootargs_hassos} ${bootargs_odroidn2} ${bootargs_a} rauc.slot=A ${cmdline}" fi elif test "x${BOOT_SLOT}" = "xB"; then if test ${BOOT_B_LEFT} -gt 0; then setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1 echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining" - setenv load_kernel "ext4load mmc ${devnum}:4 ${kernel_addr_r} Image" - setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}" + setenv load_kernel "ext4load mmc ${devnum}:7 ${kernel_addr_r} Image" + setenv bootargs "${bootargs_hassos} ${bootargs_odroidn2} ${bootargs_b} rauc.slot=B ${cmdline}" fi fi done diff --git a/buildroot-external/board/orangepi/prime/uboot.config b/buildroot-external/board/hardkernel/odroid-n2/uboot.config similarity index 65% rename from buildroot-external/board/orangepi/prime/uboot.config rename to buildroot-external/board/hardkernel/odroid-n2/uboot.config index 8afa0b76a..f276dedff 100644 --- a/buildroot-external/board/orangepi/prime/uboot.config +++ b/buildroot-external/board/hardkernel/odroid-n2/uboot.config @@ -1,6 +1,6 @@ # CONFIG_USB_STORAGE is not set -# CONFIG_DOS_PARTITIONcs not set -CONFIG_EFI_PARTITION is not set +CONFIG_DOS_PARTITION=y +# CONFIG_EFI_PARTITION is not set CONFIG_USB=y CONFIG_CMD_USB=y CONFIG_DM_USB=y diff --git a/buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt b/buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt index a15b61d8d..8792fee3a 100644 --- a/buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt +++ b/buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt @@ -1,7 +1,6 @@ macaddr=00:1e:06:61:7a:39 vout=hdmi -vout=hdmi # - DVI Mode (disables sound over HDMI as per DVI compat) # vout=dvi @@ -16,7 +15,7 @@ disable_vu7=false # DRAM Frequency # Sets the LPDDR3 memory frequency # Supported values: 933 825 728 633 (MHZ) -ddr_freq 825 +ddr_freq=825 # External watchdog board enable external_watchdog=false diff --git a/buildroot-external/board/hardkernel/odroid-xu4/kernel.config b/buildroot-external/board/hardkernel/odroid-xu4/kernel.config index 70f913b5d..5e29cc188 100644 --- a/buildroot-external/board/hardkernel/odroid-xu4/kernel.config +++ b/buildroot-external/board/hardkernel/odroid-xu4/kernel.config @@ -1,31 +1,17 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm 4.14.15 Kernel Configuration +# Linux/arm 5.4.0 Kernel Configuration # -CONFIG_ARM=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_ARM_DMA_USE_IOMMU=y -CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_NO_IOPORT_MAP=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_BANDGAP=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_GENERIC_BUG=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Compiler: gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0 +# +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=70400 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_CAN_LINK=y +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y @@ -33,10 +19,11 @@ CONFIG_BUILDTIME_EXTABLE_SORT=y # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set +# CONFIG_HEADER_TEST is not set CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_LOCALVERSION_AUTO=y +CONFIG_BUILD_SALT="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y @@ -49,18 +36,12 @@ CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_FHANDLE=y # CONFIG_USELIB is not set -CONFIG_AUDIT=y +# CONFIG_AUDIT is not set CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y -CONFIG_AUDIT_WATCH=y -CONFIG_AUDIT_TREE=y # # IRQ subsystem @@ -69,15 +50,18 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_SHOW_LEVEL=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y -CONFIG_GENERIC_IRQ_DEBUGFS=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +# end of IRQ subsystem + +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -94,19 +78,26 @@ CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +# end of Timers subsystem + +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +CONFIG_PREEMPTION=y # # CPU/Task time and stats accounting # CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -CONFIG_IRQ_TIME_ACCOUNTING=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_IRQ_TIME_ACCOUNTING is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_PSI is not set +# end of CPU/Task time and stats accounting + +CONFIG_CPU_ISOLATION=y # # RCU Subsystem @@ -118,48 +109,41 @@ CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_BUILD_BIN2C=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y +# end of RCU Subsystem + +# CONFIG_IKCONFIG is not set +# CONFIG_IKHEADERS is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_GENERIC_SCHED_CLOCK=y + +# +# Scheduler features +# +# end of Scheduler features + CONFIG_CGROUPS=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -CONFIG_MEMCG_SWAP_ENABLED=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_CGROUP_PIDS=n -CONFIG_CGROUP_RDMA=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_BPF=y -CONFIG_SOCK_CGROUP_DATA=y -# CONFIG_CHECKPOINT_RESTORE is not set +# CONFIG_MEMCG is not set +# CONFIG_BLK_CGROUP is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUP_PIDS is not set +# CONFIG_CGROUP_RDMA is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CGROUP_CPUACCT is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y +# CONFIG_USER_NS is not set CONFIG_PID_NS=y CONFIG_NET_NS=y +# CONFIG_CHECKPOINT_RESTORE is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y +# CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" -# CONFIG_INITRAMFS_FORCE is not set CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y @@ -169,19 +153,14 @@ CONFIG_RD_LZ4=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_BPF=y # CONFIG_EXPERT is not set CONFIG_UID16=y CONFIG_MULTIUSER=y -# CONFIG_SGETMASK_SYSCALL is not set CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set -CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_PRINTK=y CONFIG_PRINTK_NMI=y CONFIG_BUG=y @@ -193,196 +172,76 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -CONFIG_BPF_SYSCALL=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y -# CONFIG_USERFAULTFD is not set CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +# CONFIG_BPF_SYSCALL is not set +# CONFIG_USERFAULTFD is not set +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y -# CONFIG_PC104 is not set # # Kernel Performance Events And Counters # -CONFIG_PERF_EVENTS=y +# CONFIG_PERF_EVENTS is not set +# end of Kernel Performance Events And Counters + CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_SLUB_MEMCG_SYSFS_ON is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set # CONFIG_SLAB_FREELIST_HARDENED is not set +# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set CONFIG_SLUB_CPU_PARTIAL=y -# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_SYSTEM_DATA_VERIFICATION=y # CONFIG_PROFILING is not set -CONFIG_TRACEPOINTS=y -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_JUMP_LABEL is not set -CONFIG_UPROBES=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_NMI=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_GCC_PLUGINS=y -# CONFIG_GCC_PLUGINS is not set -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_CC_STACKPROTECTOR=y -# CONFIG_CC_STACKPROTECTOR_NONE is not set -CONFIG_CC_STACKPROTECTOR_REGULAR=y -# CONFIG_CC_STACKPROTECTOR_STRONG is not set -CONFIG_THIN_ARCHIVES=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_ARCH_MMAP_RND_BITS=y -CONFIG_HAVE_EXIT_THREAD=y -CONFIG_ARCH_MMAP_RND_BITS_MIN=8 -CONFIG_ARCH_MMAP_RND_BITS_MAX=16 -CONFIG_ARCH_MMAP_RND_BITS=8 -# CONFIG_HAVE_ARCH_HASH is not set -# CONFIG_ISA_BUS_API is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y -# CONFIG_CPU_NO_EFFICIENT_FFS is not set -# CONFIG_HAVE_ARCH_VMAP_STACK is not set -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_STRICT_MODULE_RWX=y -# CONFIG_REFCOUNT_FULL is not set +# end of General setup -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -# CONFIG_TRIM_UNUSED_KSYMS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_LBDAF=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -# CONFIG_BLK_DEV_INTEGRITY is not set -# CONFIG_BLK_DEV_ZONED is not set -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_DEV_THROTTLING_LOW is not set -# CONFIG_BLK_CMDLINE_PARSER is not set -# CONFIG_BLK_WBT is not set -CONFIG_BLK_DEBUG_FS=y -# CONFIG_BLK_SED_OPAL is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_AIX_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_CFQ_GROUP_IOSCHED=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_MQ_IOSCHED_DEADLINE=y -CONFIG_MQ_IOSCHED_KYBER=y -# CONFIG_IOSCHED_BFQ is not set -CONFIG_PADATA=y -CONFIG_ASN1=m -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_FREEZER=y +CONFIG_ARM=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_DMA_USE_IOMMU=y +CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_NO_IOPORT_MAP=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y +CONFIG_PGTABLE_LEVELS=2 # # System Type # CONFIG_MMU=y +CONFIG_ARCH_MMAP_RND_BITS_MIN=8 +CONFIG_ARCH_MMAP_RND_BITS_MAX=16 CONFIG_ARCH_MULTIPLATFORM=y # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP1 is not set # @@ -395,40 +254,17 @@ CONFIG_ARCH_MULTIPLATFORM=y # CONFIG_ARCH_MULTI_V6 is not set CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_MULTI_V6_V7=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# end of Multiple platform selection + # CONFIG_ARCH_VIRT is not set -# CONFIG_ARCH_MVEBU is not set # CONFIG_ARCH_ACTIONS is not set # CONFIG_ARCH_ALPINE is not set # CONFIG_ARCH_ARTPEC is not set +# CONFIG_ARCH_ASPEED is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCM is not set # CONFIG_ARCH_BERLIN is not set # CONFIG_ARCH_DIGICOLOR is not set -# CONFIG_ARCH_HIGHBANK is not set -# CONFIG_ARCH_HISI is not set -# CONFIG_ARCH_KEYSTONE is not set -# CONFIG_ARCH_MESON is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_MEDIATEK is not set - -# -# TI OMAP/AM/DM/DRA Family -# -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_ARCH_OMAP4 is not set -# CONFIG_SOC_OMAP5 is not set -# CONFIG_SOC_AM33XX is not set -# CONFIG_SOC_AM43XX is not set -# CONFIG_SOC_DRA7XX is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_ROCKCHIP is not set -# CONFIG_ARCH_SOCFPGA is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_S5PV210 is not set CONFIG_ARCH_EXYNOS=y CONFIG_S5P_DEV_MFC=y CONFIG_ARCH_EXYNOS3=y @@ -440,15 +276,13 @@ CONFIG_ARCH_EXYNOS5=y # CONFIG_SOC_EXYNOS3250=y CONFIG_CPU_EXYNOS4210=y -CONFIG_SOC_EXYNOS4212=y CONFIG_SOC_EXYNOS4412=y CONFIG_SOC_EXYNOS5250=y CONFIG_SOC_EXYNOS5260=y CONFIG_SOC_EXYNOS5410=y CONFIG_SOC_EXYNOS5420=y -CONFIG_SOC_EXYNOS5440=y CONFIG_SOC_EXYNOS5800=y -CONFIG_EXYNOS5420_MCPM=y +CONFIG_EXYNOS_MCPM=y CONFIG_EXYNOS_CPU_SUSPEND=y CONFIG_PLAT_SAMSUNG=y @@ -459,15 +293,46 @@ CONFIG_PLAT_SAMSUNG=y # # Boot options # -# CONFIG_SAMSUNG_ATAGS is not set # # Power management # -# CONFIG_SAMSUNG_PM_CHECK is not set -# CONFIG_ARCH_RENESAS is not set -# CONFIG_ARCH_SUNXI is not set +# end of Samsung Common options + +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HISI is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_KEYSTONE is not set +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MILBEAUT is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_NPCM is not set + +# +# TI OMAP/AM/DM/DRA Family +# +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set +# CONFIG_SOC_OMAP5 is not set +# CONFIG_SOC_AM33XX is not set +# CONFIG_SOC_AM43XX is not set +# CONFIG_SOC_DRA7XX is not set +# end of TI OMAP/AM/DM/DRA Family + # CONFIG_ARCH_SIRF is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_RDA is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_STM32 is not set +# CONFIG_ARCH_SUNXI is not set # CONFIG_ARCH_TANGO is not set # CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_UNIPHIER is not set @@ -498,21 +363,22 @@ CONFIG_CPU_CP15_MMU=y # Processor Features # # CONFIG_ARM_LPAE is not set -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set CONFIG_ARM_VIRT_EXT=y CONFIG_SWP_EMULATE=y # CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_SPECTRE=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y CONFIG_KUSER_HELPERS=y CONFIG_VDSO=y CONFIG_OUTER_CACHE=y CONFIG_OUTER_CACHE_SYNC=y CONFIG_MIGHT_HAVE_CACHE_L2X0=y CONFIG_CACHE_L2X0=y -# CONFIG_CACHE_L2X0_PMU is not set # CONFIG_PL310_ERRATA_588369 is not set # CONFIG_PL310_ERRATA_727915 is not set # CONFIG_PL310_ERRATA_753970 is not set @@ -523,7 +389,6 @@ CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_ARM_HEAVY_MB=y CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_MULTI_IRQ_HANDLER=y # CONFIG_ARM_ERRATA_430973 is not set CONFIG_ARM_ERRATA_643719=y # CONFIG_ARM_ERRATA_720789 is not set @@ -536,25 +401,17 @@ CONFIG_ARM_ERRATA_643719=y # CONFIG_ARM_ERRATA_818325_852422 is not set # CONFIG_ARM_ERRATA_821420 is not set # CONFIG_ARM_ERRATA_825619 is not set +# CONFIG_ARM_ERRATA_857271 is not set # CONFIG_ARM_ERRATA_852421 is not set # CONFIG_ARM_ERRATA_852423 is not set +# CONFIG_ARM_ERRATA_857272 is not set +# end of System Type # # Bus support # -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS_GENERIC is not set -# CONFIG_PCI_SYSCALL is not set - -# -# DesignWare PCI Core Support -# - -# -# PCI Endpoint -# -# CONFIG_PCI_ENDPOINT is not set -# CONFIG_PCCARD is not set +# CONFIG_ARM_ERRATA_814220 is not set +# end of Bus support # # Kernel Features @@ -563,17 +420,12 @@ CONFIG_HAVE_SMP=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y CONFIG_ARM_CPU_TOPOLOGY=y -CONFIG_SCHED_MC=y -CONFIG_HPERF_HMP=y -# CONFIG_HPERF_HMP_DEBUG is not set -CONFIG_HMP_FAST_CPU_MASK="F0" -CONFIG_HMP_SLOW_CPU_MASK="0F" +# CONFIG_SCHED_MC is not set # CONFIG_SCHED_SMT is not set CONFIG_HAVE_ARM_SCU=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_MCPM=y -#CONFIG_BIG_LITTLE=y -# CONFIG_BL_SWITCHER is not set +# CONFIG_BIG_LITTLE is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set @@ -583,70 +435,34 @@ CONFIG_NR_CPUS=8 CONFIG_HOTPLUG_CPU=y # CONFIG_ARM_PSCI is not set CONFIG_ARCH_NR_GPIO=512 -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_COUNT=y CONFIG_HZ_FIXED=0 -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_200 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set # CONFIG_HZ_500 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y # CONFIG_THUMB2_KERNEL is not set CONFIG_ARM_PATCH_IDIV=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_HAVE_ARCH_PFN_VALID=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_CPU_SW_DOMAIN_PAN=y -CONFIG_HW_PERF_EVENTS=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -# CONFIG_ARM_MODULE_PLTS is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_NO_BOOTMEM=y -CONFIG_MEMORY_ISOLATION=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_BOUNCE=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_ARCH_WANTS_THP_SWAP is not set -# CONFIG_CLEANCACHE is not set -# CONFIG_FRONTSWAP is not set -CONFIG_CMA=y -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_AREAS=7 -# CONFIG_ZPOOL is not set -# CONFIG_ZBUD is not set -CONFIG_ZSMALLOC=y -CONFIG_PGTABLE_MAPPING=y -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_FRAME_VECTOR=y -# CONFIG_PERCPU_STATS is not set +CONFIG_ARM_MODULE_PLTS=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set -CONFIG_SECCOMP=y -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y +# CONFIG_SECCOMP is not set # CONFIG_PARAVIRT is not set # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set # CONFIG_XEN is not set +# end of Kernel Features # # Boot options @@ -654,20 +470,15 @@ CONFIG_IOMMU_HELPER=y CONFIG_USE_OF=y CONFIG_ATAGS=y # CONFIG_DEPRECATED_PARAM_STRUCT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y -CONFIG_CMDLINE="s5p_mfc.mem=16M" -# CONFIG_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_CMDLINE_EXTEND=y -# CONFIG_CMDLINE_FORCE is not set +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_AUTO_ZRELADDR=y # CONFIG_EFI is not set +# end of Boot options # # CPU Power Management @@ -676,34 +487,16 @@ CONFIG_AUTO_ZRELADDR=y # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y - -# -# CPU frequency scaling drivers -# -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set -# CONFIG_ARM_EXYNOS5440_CPUFREQ is not set -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set -# CONFIG_QORIQ_CPUFREQ is not set +# CONFIG_CPU_FREQ is not set +# end of CPU Frequency scaling # # CPU Idle # CONFIG_CPU_IDLE=y -# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_IDLE_GOV_TEO is not set # # ARM CPU Idle Drivers @@ -711,7 +504,11 @@ CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARM_CPUIDLE is not set # CONFIG_ARM_BIG_LITTLE_CPUIDLE is not set CONFIG_ARM_EXYNOS_CPUIDLE=y +# end of ARM CPU Idle Drivers + CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y +# end of CPU Idle +# end of CPU Power Management # # Floating point emulation @@ -724,18 +521,7 @@ CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_ELFCORE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -# CONFIG_BINFMT_FLAT is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y +# end of Floating point emulation # # Power management options @@ -748,12 +534,8 @@ CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_ADVANCED_DEBUG=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_PM_DEBUG is not set # CONFIG_APM_EMULATION is not set -CONFIG_PM_OPP=y CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set @@ -763,836 +545,365 @@ CONFIG_CPU_PM=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARM_CPU_SUSPEND=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# end of Power management options + +# +# Firmware Drivers +# +# CONFIG_TRUSTED_FOUNDATIONS is not set +CONFIG_HAVE_ARM_SMCCC=y +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# Tegra firmware driver +# +# end of Tegra firmware driver +# end of Firmware Drivers + +# CONFIG_ARM_CRYPTO is not set +# CONFIG_VIRTUALIZATION is not set + +# +# General architecture-dependent options +# +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_KEEPINITRD=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_HAVE_EXIT_THREAD=y +CONFIG_ARCH_MMAP_RND_BITS=8 +CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OLD_SIGACTION=y +CONFIG_64BIT_TIME=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_REFCOUNT_FULL=y +# CONFIG_LOCK_EVENT_COUNTS is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +# end of GCOV-based kernel profiling + +CONFIG_PLUGIN_HOSTCC="" +CONFIG_HAVE_GCC_PLUGINS=y +# end of General architecture-dependent options + +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_DEV_ZONED is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +# CONFIG_BLK_WBT is not set +CONFIG_BLK_DEBUG_FS=y +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +# end of Partition Types + +CONFIG_BLK_PM=y + +# +# IO Schedulers +# +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +# CONFIG_IOSCHED_BFQ is not set +# end of IO Schedulers + +CONFIG_ASN1=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_ELF_FDPIC is not set +CONFIG_ELFCORE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_ARCH_HAS_BINFMT_FLAT=y +# CONFIG_BINFMT_FLAT is not set +CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +# end of Executable file formats + +# +# Memory Management options +# +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_CONTIG_ALLOC=y +CONFIG_BOUNCE=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_FRAME_VECTOR=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +# end of Memory Management options + CONFIG_NET=y -CONFIG_NET_INGRESS=y -CONFIG_NET_EGRESS=y +CONFIG_SKB_EXTENSIONS=y # # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m +# CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y -CONFIG_UNIX_DIAG=m +CONFIG_UNIX_SCM=y +# CONFIG_UNIX_DIAG is not set # CONFIG_TLS is not set CONFIG_XFRM=y CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_XFRM_MIGRATE=y -CONFIG_XFRM_STATISTICS=y -CONFIG_XFRM_IPCOMP=m +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_INTERFACE is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_FIB_TRIE_STATS=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -# CONFIG_INET_ESP_OFFLOAD is not set -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set # CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_DIAG_DESTROY=y -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_NV=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -CONFIG_TCP_CONG_DCTCP=m -CONFIG_TCP_CONG_CDG=m -CONFIG_TCP_CONG_BBR=m -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y -CONFIG_IPV6=m -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_OPTIMISTIC_DAD=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -# CONFIG_INET6_ESP_OFFLOAD is not set -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_SIT_6RD=y +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -CONFIG_IPV6_FOU=m -CONFIG_IPV6_FOU_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y -CONFIG_IPV6_PIMSM_V2=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_IPV6_SEG6_LWTUNNEL is not set # CONFIG_IPV6_SEG6_HMAC is not set # CONFIG_NETWORK_SECMARK is not set -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NETWORK_PHY_TIMESTAMPING=y -CONFIG_NETFILTER=y -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -# CONFIG_NF_LOG_NETDEV is not set -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_ZONES=y -CONFIG_NF_CONNTRACK_PROCFS=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CONNTRACK_TIMEOUT=y -CONFIG_NF_CONNTRACK_TIMESTAMP=y -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=y -CONFIG_NF_CT_PROTO_UDPLITE=y -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -CONFIG_NF_CT_NETLINK_HELPER=m -CONFIG_NETFILTER_NETLINK_GLUE_CT=y -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_NF_NAT_PROTO_DCCP=y -CONFIG_NF_NAT_PROTO_UDPLITE=y -CONFIG_NF_NAT_PROTO_SCTP=y -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=m -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=m -CONFIG_NF_TABLES_NETDEV=m -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m -# CONFIG_NFT_RT is not set -CONFIG_NFT_NUMGEN=m -CONFIG_NFT_CT=m -CONFIG_NFT_SET_RBTREE=m -CONFIG_NFT_SET_HASH=m -# CONFIG_NFT_SET_BITMAP is not set -CONFIG_NFT_COUNTER=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -# CONFIG_NFT_OBJREF is not set -CONFIG_NFT_QUEUE=m -CONFIG_NFT_QUOTA=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NFT_HASH=m -CONFIG_NF_DUP_NETDEV=m -CONFIG_NFT_DUP_NETDEV=m -CONFIG_NFT_FWD_NETDEV=m -CONFIG_NETFILTER_XTABLES=y - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -# CONFIG_IP_SET_HASH_IPMAC is not set -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -# CONFIG_NF_SOCKET_IPV4 is not set -CONFIG_NF_TABLES_IPV4=m -CONFIG_NFT_CHAIN_ROUTE_IPV4=m -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -# CONFIG_NFT_FIB_IPV4 is not set -CONFIG_NF_TABLES_ARP=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_IPV4=m -CONFIG_NFT_CHAIN_NAT_IPV4=m -CONFIG_NF_NAT_MASQUERADE_IPV4=m -CONFIG_NFT_MASQ_IPV4=m -CONFIG_NFT_REDIR_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_NF_SOCKET_IPV6 is not set -CONFIG_NF_TABLES_IPV6=m -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -# CONFIG_NFT_FIB_IPV6 is not set -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_NF_NAT_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m -CONFIG_NF_NAT_MASQUERADE_IPV6=m -CONFIG_NFT_MASQ_IPV6=m -CONFIG_NFT_REDIR_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m - -# -# DECnet: Netfilter Configuration -# -# CONFIG_DECNET_NF_GRABULATOR is not set -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +# CONFIG_NETFILTER is not set +# CONFIG_BPFILTER is not set # CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set -CONFIG_INET_SCTP_DIAG=m -CONFIG_RDS=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -CONFIG_ATM_CLIP_NO_ICMP=y -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_ATM_BR2684_IPFILTER=y -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_MRP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +# CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_NET_DSA is not set -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_VLAN_8021Q_MVRP=y -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_IPX=m -CONFIG_IPX_INTERN=y -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set -CONFIG_6LOWPAN=m -# CONFIG_6LOWPAN_DEBUGFS is not set -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m -CONFIG_6LOWPAN_GHC_UDP=m -CONFIG_6LOWPAN_GHC_ICMPV6=m -CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m -CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m -CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m -CONFIG_IEEE802154=m -CONFIG_IEEE802154_NL802154_EXPERIMENTAL=y -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -# CONFIG_NET_SCH_ATM is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m -# CONFIG_NET_SCH_DEFAULT is not set - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=m -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_CLS_MATCHALL=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -# CONFIG_NET_EMATCH_CANID is not set -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=m -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -# CONFIG_NET_ACT_SAMPLE is not set -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -CONFIG_NET_ACT_SKBMOD=m -CONFIG_NET_ACT_IFE=m -CONFIG_NET_ACT_TUNNEL_KEY=m -CONFIG_NET_IFE_SKBMARK=m -CONFIG_NET_IFE_SKBPRIO=m -CONFIG_NET_IFE_SKBTCINDEX=m -CONFIG_NET_CLS_IND=y -CONFIG_NET_SCH_FIFO=y +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set # CONFIG_DCB is not set -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -CONFIG_BATMAN_ADV_BATMAN_V=y -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -CONFIG_BATMAN_ADV_DEBUGFS=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -# CONFIG_MPLS_ROUTING is not set +# CONFIG_DNS_RESOLVER is not set +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set # CONFIG_NET_NSH is not set # CONFIG_HSR is not set # CONFIG_NET_SWITCHDEV is not set -CONFIG_NET_L3_MASTER_DEV=y +# CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_NET_NCSI is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y # CONFIG_BPF_JIT is not set -# CONFIG_BPF_STREAM_PARSER is not set CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set -CONFIG_NET_DROP_MONITOR=y -CONFIG_HAMRADIO=y +# end of Network testing +# end of Networking options -# -# Packet Radio protocols -# -# CONFIG_AX25 is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -# CONFIG_CAN_VCAN is not set -# CONFIG_CAN_VXCAN is not set -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -# CONFIG_CAN_LEDS is not set -# CONFIG_CAN_FLEXCAN is not set -# CONFIG_CAN_GRCAN is not set -# CONFIG_CAN_TI_HECC is not set -# CONFIG_CAN_C_CAN is not set -# CONFIG_CAN_CC770 is not set -# CONFIG_CAN_IFI_CANFD is not set -# CONFIG_CAN_M_CAN is not set -# CONFIG_CAN_RCAR is not set -# CONFIG_CAN_RCAR_CANFD is not set -# CONFIG_CAN_SJA1000 is not set -# CONFIG_CAN_SOFTING is not set - -# -# CAN SPI interfaces -# -# CONFIG_CAN_HI311X is not set -CONFIG_CAN_MCP251X=m - -# -# CAN USB interfaces -# -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_8DEV_USB=m -# CONFIG_CAN_MCBA_USB is not set -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -# CONFIG_BT_6LOWPAN is not set -CONFIG_BT_LEDS=y -CONFIG_BT_DEBUGFS=y - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIUART_AG6XX=y -CONFIG_BT_HCIUART_MRVL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -# CONFIG_BT_MRVL_SDIO is not set -CONFIG_BT_ATH3K=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_AF_KCM is not set -# CONFIG_STREAM_PARSER is not set -CONFIG_FIB_RULES=y CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m +CONFIG_CFG80211=y # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_LIB80211=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -# CONFIG_MAC80211_RC_MINSTREL_VHT is not set -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -# CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_CFG80211_WEXT is not set +# CONFIG_MAC80211 is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 # CONFIG_WIMAX is not set -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_GPIO is not set +# CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -# CONFIG_NFC_NCI is not set -CONFIG_NFC_HCI=m -# CONFIG_NFC_SHDLC is not set - -# -# Near Field Communication (NFC) devices -# -# CONFIG_NFC_TRF7970A is not set -# CONFIG_NFC_SIM is not set -# CONFIG_NFC_PORT100 is not set -CONFIG_NFC_PN533=m -CONFIG_NFC_PN533_USB=m -# CONFIG_NFC_PN533_I2C is not set -# CONFIG_NFC_ST95HF is not set +# CONFIG_NFC is not set # CONFIG_PSAMPLE is not set -CONFIG_NET_IFE=m -CONFIG_LWTUNNEL=y -CONFIG_LWTUNNEL_BPF=y +# CONFIG_NET_IFE is not set +# CONFIG_LWTUNNEL is not set CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y -# CONFIG_NET_DEVLINK is not set -CONFIG_MAY_USE_DEVLINK=y +# CONFIG_FAILOVER is not set CONFIG_HAVE_EBPF_JIT=y # # Device Drivers # CONFIG_ARM_AMBA=y +CONFIG_HAVE_PCI=y +# CONFIG_PCI is not set +# CONFIG_PCCARD is not set # # Generic Driver Options # CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="s5p-mfc-v8.fw" -CONFIG_EXTRA_FIRMWARE_DIR="/build/buildroot/output/target/usr/lib/firmware/" -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_WANT_DEV_COREDUMP=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER is not set +# CONFIG_FW_LOADER_COMPRESS is not set +# end of Firmware loader + CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_SOC_BUS=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y @@ -1600,38 +911,30 @@ CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=128 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 CONFIG_GENERIC_ARCH_TOPOLOGY=y +# end of Generic Driver Options # # Bus devices # CONFIG_ARM_CCI=y CONFIG_ARM_CCI400_COMMON=y -# CONFIG_ARM_CCI400_PMU is not set CONFIG_ARM_CCI400_PORT_CTRL=y -# CONFIG_ARM_CCI5xx_PMU is not set -# CONFIG_ARM_CCN is not set # CONFIG_BRCMSTB_GISB_ARB is not set +# CONFIG_MOXTET is not set # CONFIG_SIMPLE_PM_BUS is not set # CONFIG_VEXPRESS_CONFIG is not set +# end of Bus devices + # CONFIG_CONNECTOR is not set +# CONFIG_GNSS is not set # CONFIG_MTD is not set CONFIG_DTC=y CONFIG_OF=y # CONFIG_OF_UNITTEST is not set CONFIG_OF_FLATTREE=y CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_KOBJ=y CONFIG_OF_ADDRESS=y CONFIG_OF_IRQ=y CONFIG_OF_NET=y @@ -1639,35 +942,30 @@ CONFIG_OF_MDIO=y CONFIG_OF_RESERVED_MEM=y # CONFIG_OF_OVERLAY is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -# CONFIG_PARPORT_PC is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_AX88796 is not set -# CONFIG_PARPORT_1284 is not set +# CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_NULL_BLK is not set -CONFIG_ZRAM=m -# CONFIG_ZRAM_WRITEBACK is not set -# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_RBD is not set + +# +# NVME Support +# # CONFIG_NVME_FC is not set -# CONFIG_NVME_TARGET is not set +# end of NVME Support # # Misc devices # -# CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_ICS932S401 is not set @@ -1680,11 +978,11 @@ CONFIG_ATA_OVER_ETH=m # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set -# CONFIG_TI_DAC7512 is not set -# CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set CONFIG_SRAM=y CONFIG_SRAM_EXEC=y +# CONFIG_XILINX_SDFEC is not set +# CONFIG_PVPANIC is not set # CONFIG_C2PORT is not set # @@ -1694,21 +992,25 @@ CONFIG_SRAM_EXEC=y # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set -CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set +# CONFIG_EEPROM_EE1004 is not set +# end of EEPROM support # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set +# end of Texas Instruments shared transport line discipline + # CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set +# CONFIG_ALTERA_STAPL is not set # -# Altera FPGA firmware download module +# Intel MIC & related support # -# CONFIG_ALTERA_STAPL is not set # # Intel MIC Bus Driver @@ -1721,6 +1023,7 @@ CONFIG_EEPROM_93CX6=m # # VOP Bus Driver # +# CONFIG_VOP_BUS is not set # # Intel MIC Host Driver @@ -1741,10 +1044,11 @@ CONFIG_EEPROM_93CX6=m # # VOP Driver # +# end of Intel MIC & related support + # CONFIG_ECHO is not set -# CONFIG_CXL_BASE is not set -# CONFIG_CXL_AFU_DRIVER_OPS is not set -# CONFIG_CXL_LIB is not set +# CONFIG_MISC_RTSX_USB is not set +# end of Misc devices # # SCSI device support @@ -1753,8 +1057,6 @@ CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_MQ_DEFAULT is not set CONFIG_SCSI_PROC_FS=y # @@ -1762,9 +1064,7 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y +# CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_CONSTANTS is not set @@ -1776,94 +1076,41 @@ CONFIG_CHR_DEV_SG=y # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set +# end of SCSI Transports + CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set +# end of SCSI device support + # CONFIG_ATA is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_MQ_DEFAULT is not set -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=m -# CONFIG_DM_LOG_USERSPACE is not set -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -CONFIG_DM_DELAY=m -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -CONFIG_DM_VERITY_FEC=y -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -# CONFIG_DM_INTEGRITY is not set +# CONFIG_MD is not set # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set -# CONFIG_IFB is not set -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN=m -# CONFIG_IPVTAP is not set -CONFIG_VXLAN=m +# CONFIG_NET_TEAM is not set +# CONFIG_MACVLAN is not set +# CONFIG_IPVLAN is not set +# CONFIG_VXLAN is not set # CONFIG_GENEVE is not set # CONFIG_GTP is not set -CONFIG_MACSEC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_TUN=m -CONFIG_TAP=m +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_TUN is not set # CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m +# CONFIG_VETH is not set # CONFIG_NLMON is not set -# CONFIG_NET_VRF is not set -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m # # CAIF transport drivers @@ -1872,69 +1119,112 @@ CONFIG_ATM_TCP=m # # Distributed Switch Architecture drivers # +# end of Distributed Switch Architecture drivers + CONFIG_ETHERNET=y CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_ALTERA_TSE is not set CONFIG_NET_VENDOR_AMAZON=y CONFIG_NET_VENDOR_AQUANTIA=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_AURORA is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set +CONFIG_NET_VENDOR_ARC=y +CONFIG_NET_VENDOR_AURORA=y +# CONFIG_AURORA_NB8800 is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_SYSTEMPORT is not set +CONFIG_NET_VENDOR_CADENCE=y +# CONFIG_MACB is not set +CONFIG_NET_VENDOR_CAVIUM=y +CONFIG_NET_VENDOR_CIRRUS=y +# CONFIG_CS89x0 is not set +CONFIG_NET_VENDOR_CORTINA=y +# CONFIG_GEMINI_ETHERNET is not set # CONFIG_DM9000 is not set # CONFIG_DNET is not set -# CONFIG_NET_VENDOR_EZCHIP is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_HISILICON is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_FARADAY=y +# CONFIG_FTMAC100 is not set +# CONFIG_FTGMAC100 is not set +CONFIG_NET_VENDOR_GOOGLE=y +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +# CONFIG_HNS is not set +# CONFIG_HNS_DSAF is not set +# CONFIG_HNS_ENET is not set CONFIG_NET_VENDOR_HUAWEI=y -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_I825XX=y +CONFIG_NET_VENDOR_INTEL=y +CONFIG_NET_VENDOR_MARVELL=y +# CONFIG_MVMDIO is not set CONFIG_NET_VENDOR_MELLANOX=y # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_NETRONOME is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +CONFIG_NET_VENDOR_MICROSEMI=y +CONFIG_NET_VENDOR_NATSEMI=y +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NET_VENDOR_NI=y +# CONFIG_NI_XGE_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_AX88796 is not set # CONFIG_ETHOC is not set -# CONFIG_NET_VENDOR_QUALCOMM is not set -# CONFIG_NET_VENDOR_RENESAS is not set -# CONFIG_NET_VENDOR_ROCKER is not set -# CONFIG_NET_VENDOR_SAMSUNG is not set +CONFIG_NET_VENDOR_PENSANDO=y +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000_SPI is not set +# CONFIG_QCOM_EMAC is not set +# CONFIG_RMNET is not set +CONFIG_NET_VENDOR_RENESAS=y +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_NET_VENDOR_SMSC=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y -# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_NET_VENDOR_SOCIONEXT=y CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_DWC_XLGMAC is not set CONFIG_NET_VENDOR_VIA=y # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set -CONFIG_NET_VENDOR_SYNOPSYS=y -# CONFIG_DWC_XLGMAC is not set +CONFIG_NET_VENDOR_XILINX=y +# CONFIG_XILINX_AXI_EMAC is not set CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y # CONFIG_MDIO_BCM_UNIMAC is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set # CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_MSCC_MIIM is not set CONFIG_PHYLIB=y CONFIG_SWPHY=y -# CONFIG_LED_TRIGGER_PHY is not set # # MII PHY device drivers # +# CONFIG_ADIN_PHY is not set # CONFIG_AMD_PHY is not set # CONFIG_AQUANTIA_PHY is not set +# CONFIG_AX88796B_PHY is not set # CONFIG_AT803X_PHY is not set # CONFIG_BCM7XXX_PHY is not set # CONFIG_BCM87XX_PHY is not set @@ -1942,6 +1232,8 @@ CONFIG_SWPHY=y # CONFIG_CICADA_PHY is not set # CONFIG_CORTINA_PHY is not set # CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83822_PHY is not set +# CONFIG_DP83TC811_PHY is not set # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set CONFIG_FIXED_PHY=y @@ -1952,11 +1244,14 @@ CONFIG_FIXED_PHY=y # CONFIG_MARVELL_PHY is not set # CONFIG_MARVELL_10G_PHY is not set # CONFIG_MICREL_PHY is not set -CONFIG_MICROCHIP_PHY=m +# CONFIG_MICROCHIP_PHY is not set +# CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_NATIONAL_PHY is not set +# CONFIG_NXP_TJA11XX_PHY is not set # CONFIG_QSEMI_PHY is not set -# CONFIG_REALTEK_PHY is not set +CONFIG_REALTEK_PHY=y +# CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_STE10XP is not set @@ -1964,204 +1259,84 @@ CONFIG_MICROCHIP_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_MICREL_KS8995MA is not set -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +CONFIG_USB_RTL8150=y CONFIG_USB_RTL8152=y -CONFIG_USB_LAN78XX=m +# CONFIG_USB_LAN78XX is not set CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_AX88179_178A=y CONFIG_USB_NET_CDCETHER=y -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=y +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SR9700 is not set +# CONFIG_USB_NET_SR9800 is not set +CONFIG_USB_NET_SMSC75XX=y +CONFIG_USB_NET_SMSC95XX=y +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set CONFIG_USB_NET_CDC_SUBSET_ENABLE=y CONFIG_USB_NET_CDC_SUBSET=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +# CONFIG_USB_NET_AQC111 is not set CONFIG_WLAN=y CONFIG_WLAN_VENDOR_ADMTEK=y -CONFIG_ATH_COMMON=m CONFIG_WLAN_VENDOR_ATH=y # CONFIG_ATH_DEBUG is not set -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -# CONFIG_ATH9K_AHB is not set -# CONFIG_ATH9K_DEBUGFS is not set -# CONFIG_ATH9K_DYNACK is not set -# CONFIG_ATH9K_WOW is not set -CONFIG_ATH9K_RFKILL=y -# CONFIG_ATH9K_CHANNEL_CONTEXT is not set -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -# CONFIG_ATH9K_HWRNG is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -CONFIG_CARL9170_HWRNG=y # CONFIG_ATH6KL is not set -CONFIG_AR5523=m -CONFIG_ATH10K=m -# CONFIG_ATH10K_SDIO is not set -# CONFIG_ATH10K_USB is not set -# CONFIG_ATH10K_DEBUG is not set -# CONFIG_ATH10K_DEBUGFS is not set -# CONFIG_ATH10K_TRACING is not set -CONFIG_WCN36XX=m -# CONFIG_WCN36XX_DEBUGFS is not set CONFIG_WLAN_VENDOR_ATMEL=y -CONFIG_AT76C50X_USB=m CONFIG_WLAN_VENDOR_BROADCOM=y -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -CONFIG_BRCMUTIL=m -# CONFIG_BRCMSMAC is not set -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -# CONFIG_BRCMFMAC_SDIO is not set -CONFIG_BRCMFMAC_USB=y -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set +# CONFIG_BRCMFMAC is not set CONFIG_WLAN_VENDOR_CISCO=y CONFIG_WLAN_VENDOR_INTEL=y CONFIG_WLAN_VENDOR_INTERSIL=y # CONFIG_HOSTAP is not set -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -# CONFIG_P54_SPI is not set -CONFIG_P54_LEDS=y CONFIG_WLAN_VENDOR_MARVELL=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -# CONFIG_LIBERTAS_SDIO is not set -# CONFIG_LIBERTAS_SPI is not set -# CONFIG_LIBERTAS_DEBUG is not set -# CONFIG_LIBERTAS_MESH is not set -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_MWIFIEX=m -# CONFIG_MWIFIEX_SDIO is not set -CONFIG_MWIFIEX_USB=m +# CONFIG_LIBERTAS is not set +# CONFIG_MWIFIEX is not set CONFIG_WLAN_VENDOR_MEDIATEK=y -CONFIG_MT7601U=m CONFIG_WLAN_VENDOR_RALINK=y -CONFIG_RT2X00=m -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set CONFIG_WLAN_VENDOR_REALTEK=y -# CONFIG_RTL8187 is not set -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_USB=m -CONFIG_RTLWIFI_DEBUG=y -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8XXXU=m -# CONFIG_RTL8XXXU_UNTESTED is not set CONFIG_WLAN_VENDOR_RSI=y -# CONFIG_RSI_91X is not set CONFIG_WLAN_VENDOR_ST=y -# CONFIG_CW1200 is not set CONFIG_WLAN_VENDOR_TI=y -# CONFIG_WL1251 is not set -# CONFIG_WL12XX is not set -# CONFIG_WL18XX is not set -# CONFIG_WLCORE is not set CONFIG_WLAN_VENDOR_ZYDAS=y -CONFIG_USB_ZD1201=m -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_USB_ZD1201 is not set CONFIG_WLAN_VENDOR_QUANTENNA=y -CONFIG_RTL8812AU=m -CONFIG_RTL8188EU=m -# CONFIG_MAC80211_HWSIM is not set -CONFIG_USB_NET_RNDIS_WLAN=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_VIRT_WIFI is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # -CONFIG_WAN=y -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m - -# -# X.25/LAPB support is disabled -# -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_IEEE802154_DRIVERS=m -# CONFIG_IEEE802154_FAKELB is not set -# CONFIG_IEEE802154_AT86RF230 is not set -# CONFIG_IEEE802154_MRF24J40 is not set -# CONFIG_IEEE802154_CC2520 is not set -# CONFIG_IEEE802154_ATUSB is not set -# CONFIG_IEEE802154_ADF7242 is not set -# CONFIG_IEEE802154_CA8210 is not set +# CONFIG_WAN is not set +# CONFIG_NETDEVSIM is not set +# CONFIG_NET_FAILOVER is not set # CONFIG_ISDN is not set # CONFIG_NVM is not set @@ -2169,9 +1344,8 @@ CONFIG_IEEE802154_DRIVERS=m # Input device support # CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y CONFIG_INPUT_FF_MEMLESS=y -CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set CONFIG_INPUT_MATRIXKMAP=y @@ -2182,7 +1356,7 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m +# CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -2194,6 +1368,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1050 is not set # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_DLINK_DIR685 is not set @@ -2203,7 +1378,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set @@ -2214,108 +1388,82 @@ CONFIG_KEYBOARD_SAMSUNG=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set # CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_CROS_EC is not set # CONFIG_KEYBOARD_CAP11XX is not set # CONFIG_KEYBOARD_BCM is not set CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_SMBUS=y # CONFIG_MOUSE_SERIAL is not set -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +CONFIG_MOUSE_CYAPA=y +# CONFIG_MOUSE_ELAN_I2C is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_JOYSTICK_PSXPAD_SPI=m -CONFIG_JOYSTICK_PSXPAD_SPI_FF=y -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -# CONFIG_TABLET_USB_PEGASUS is not set -# CONFIG_TABLET_SERIAL_WACOM4 is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_ADS7846=m +# CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADC is not set # CONFIG_TOUCHSCREEN_AR1021_I2C is not set CONFIG_TOUCHSCREEN_ATMEL_MXT=y # CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set # CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_EGALAX=m +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX is not set # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +# CONFIG_TOUCHSCREEN_EXC3000 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set -CONFIG_TOUCHSCREEN_GOODIX=m +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_HIDEEP is not set # CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_S6SY761 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set -CONFIG_TOUCHSCREEN_EKTF2127=m -CONFIG_TOUCHSCREEN_ELAN=m +# CONFIG_TOUCHSCREEN_EKTF2127 is not set +# CONFIG_TOUCHSCREEN_ELAN is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -CONFIG_TOUCHSCREEN_WACOM_I2C=m +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set -CONFIG_TOUCHSCREEN_MMS114=m +# CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set -CONFIG_TOUCHSCREEN_EDT_FT5X06=m +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set +CONFIG_TOUCHSCREEN_USB_COMPOSITE=y CONFIG_TOUCHSCREEN_USB_EGALAX=y CONFIG_TOUCHSCREEN_USB_PANJIT=y CONFIG_TOUCHSCREEN_USB_3M=y @@ -2339,69 +1487,26 @@ CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y # CONFIG_TOUCHSCREEN_TSC2004 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set -CONFIG_TOUCHSCREEN_RM_TS=m -CONFIG_TOUCHSCREEN_SILEAD=m -CONFIG_TOUCHSCREEN_SIS_I2C=m +# CONFIG_TOUCHSCREEN_RM_TS is not set +# CONFIG_TOUCHSCREEN_SILEAD is not set +# CONFIG_TOUCHSCREEN_SIS_I2C is not set # CONFIG_TOUCHSCREEN_ST1232 is not set -# CONFIG_TOUCHSCREEN_STMFTS is not set # CONFIG_TOUCHSCREEN_SUR40 is not set -CONFIG_TOUCHSCREEN_SURFACE3_SPI=m +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set # CONFIG_TOUCHSCREEN_SX8654 is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set -CONFIG_TOUCHSCREEN_SX865X=m -CONFIG_TOUCHSCREEN_DWAV_USB_MT=m -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_ATMEL_CAPTOUCH is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_E3X0_BUTTON is not set -# CONFIG_INPUT_MMA8450 is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_TILT_POLLED is not set -# CONFIG_INPUT_GPIO_DECODER is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_KXTJ9 is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INPUT_CM109 is not set -# CONFIG_INPUT_REGULATOR_HAPTIC is not set -CONFIG_INPUT_UINPUT=y -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_PWM_VIBRA is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set -# CONFIG_INPUT_DRV260X_HAPTICS is not set -# CONFIG_INPUT_DRV2665_HAPTICS is not set -# CONFIG_INPUT_DRV2667_HAPTICS is not set -CONFIG_RMI4_CORE=m -# CONFIG_RMI4_I2C is not set -# CONFIG_RMI4_SPI is not set -# CONFIG_RMI4_SMB is not set -CONFIG_RMI4_F03=y -CONFIG_RMI4_F03_SERIO=m -CONFIG_RMI4_2D_SENSOR=y -CONFIG_RMI4_F11=y -CONFIG_RMI4_F12=y -CONFIG_RMI4_F30=y -# CONFIG_RMI4_F34 is not set -# CONFIG_RMI4_F54 is not set -# CONFIG_RMI4_F55 is not set +# CONFIG_TOUCHSCREEN_IQS5XX is not set +# CONFIG_INPUT_MISC is not set +# CONFIG_RMI4_CORE is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_AMBAKMI is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -2411,9 +1516,9 @@ CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_APBPS2 is not set # CONFIG_SERIO_GPIO_PS2 is not set # CONFIG_USERIO is not set -CONFIG_GAMEPORT=m -# CONFIG_GAMEPORT_NS558 is not set -# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT is not set +# end of Hardware I/O ports +# end of Input device support # # Character devices @@ -2431,6 +1536,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set +# CONFIG_NULL_TTY is not set +CONFIG_LDISC_AUTOLOAD=y CONFIG_DEVMEM=y CONFIG_DEVKMEM=y @@ -2467,6 +1574,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_SIFIVE is not set # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_BCM63XX is not set @@ -2476,19 +1584,21 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_XILINX_PS_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_FSL_LINFLEXUART is not set # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set # CONFIG_SERIAL_ST_ASC is not set +# end of Serial drivers + +CONFIG_SERIAL_MCTRL_GPIO=y # CONFIG_SERIAL_DEV_BUS is not set -# CONFIG_PRINTER is not set -# CONFIG_PPDEV is not set # CONFIG_HVC_DCC is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_TPM=y -# CONFIG_R3964 is not set +CONFIG_HW_RANDOM_EXYNOS=y # CONFIG_RAW_DRIVER is not set CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y # CONFIG_TCG_TIS is not set # CONFIG_TCG_TIS_SPI is not set # CONFIG_TCG_TIS_I2C_ATMEL is not set @@ -2498,7 +1608,9 @@ CONFIG_TCG_TIS_I2C_INFINEON=y # CONFIG_TCG_TIS_ST33ZP24_I2C is not set # CONFIG_TCG_TIS_ST33ZP24_SPI is not set # CONFIG_XILLYBUS is not set -CONFIG_EXYNOS_GPIOMEM=m +# end of Character devices + +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set # # I2C support @@ -2522,6 +1634,8 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_DEMUX_PINCTRL is not set # CONFIG_I2C_MUX_MLXCPLD is not set +# end of Multiplexer I2C Chip support + CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -2537,11 +1651,10 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_EMEV2 is not set CONFIG_I2C_EXYNOS5=y CONFIG_I2C_GPIO=y -CONFIG_I2C_GPIO_CUSTOM=m +# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set # CONFIG_I2C_NOMADIK is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_RK3X is not set CONFIG_HAVE_S3C2410_I2C=y CONFIG_I2C_S3C2410=y @@ -2552,7 +1665,6 @@ CONFIG_I2C_S3C2410=y # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_ROBOTFUZZ_OSIF is not set # CONFIG_I2C_TAOS_EVM is not set @@ -2561,33 +1673,38 @@ CONFIG_I2C_S3C2410=y # # Other I2C/SMBus bus drivers # -CONFIG_I2C_CROS_EC_TUNNEL=y +# end of I2C Hardware Bus support + # CONFIG_I2C_STUB is not set # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set +# end of I2C support + +# CONFIG_I3C is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y +# CONFIG_SPI_MEM is not set # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_AXI_SPI_ENGINE is not set -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_BITBANG is not set # CONFIG_SPI_CADENCE is not set # CONFIG_SPI_DESIGNWARE is not set -CONFIG_SPI_GPIO=y -# CONFIG_SPI_LM70_LLP is not set +# CONFIG_SPI_NXP_FLEXSPI is not set +# CONFIG_SPI_GPIO is not set # CONFIG_SPI_FSL_SPI is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PL022 is not set -# CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_ROCKCHIP is not set -CONFIG_SPI_S3C64XX=m +CONFIG_SPI_S3C64XX=y # CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_SIFIVE is not set +# CONFIG_SPI_MXIC is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set @@ -2595,172 +1712,115 @@ CONFIG_SPI_S3C64XX=m # # SPI Protocol Masters # -CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set -CONFIG_PPS=y -CONFIG_PPS_DEBUG=y - -# -# PPS clients support -# -CONFIG_PPS_CLIENT_KTIMER=m -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# +# CONFIG_PPS is not set # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set -CONFIG_PINCTRL=y # -# Pin controllers +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # +# end of PTP clock support + +CONFIG_PINCTRL=y CONFIG_PINMUX=y CONFIG_PINCONF=y # CONFIG_PINCTRL_AMD is not set # CONFIG_PINCTRL_MCP23S08 is not set # CONFIG_PINCTRL_SINGLE is not set # CONFIG_PINCTRL_SX150X is not set +# CONFIG_PINCTRL_STMFX is not set +# CONFIG_PINCTRL_OCELOT is not set CONFIG_PINCTRL_SAMSUNG=y CONFIG_PINCTRL_EXYNOS=y CONFIG_PINCTRL_EXYNOS_ARM=y -CONFIG_PINCTRL_EXYNOS5440=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_OF_GPIO=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_SYSFS=y +# CONFIG_GPIO_SYSFS is not set # # Memory mapped GPIO drivers # # CONFIG_GPIO_74XX_MMIO is not set # CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_CADENCE is not set # CONFIG_GPIO_DWAPB is not set # CONFIG_GPIO_FTGPIO010 is not set # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_GRGPIO is not set -# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_HLWD is not set +# CONFIG_GPIO_MB86S7X is not set # CONFIG_GPIO_MPC8XXX is not set # CONFIG_GPIO_PL061 is not set +# CONFIG_GPIO_SAMA5D2_PIOBU is not set # CONFIG_GPIO_SYSCON is not set # CONFIG_GPIO_XILINX is not set # CONFIG_GPIO_ZEVIO is not set +# CONFIG_GPIO_AMD_FCH is not set +# end of Memory mapped GPIO drivers # # I2C GPIO expanders # # CONFIG_GPIO_ADP5588 is not set # CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_GW_PLD is not set # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_SX150X is not set # CONFIG_GPIO_TPIC2810 is not set +# end of I2C GPIO expanders # # MFD GPIO expanders # # CONFIG_HTC_EGPIO is not set -# CONFIG_GPIO_WM8994 is not set +# end of MFD GPIO expanders # # SPI GPIO expanders # # CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX3191X is not set # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set +# end of SPI GPIO expanders # # USB GPIO expanders # -CONFIG_W1=m +# end of USB GPIO expanders -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -# CONFIG_W1_SLAVE_DS2405 is not set -CONFIG_W1_SLAVE_DS2408=m -# CONFIG_W1_SLAVE_DS2408_READBACK is not set -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -# CONFIG_W1_SLAVE_DS2805 is not set -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -CONFIG_W1_SLAVE_DS2433_CRC=y -# CONFIG_W1_SLAVE_DS2438 is not set -CONFIG_W1_SLAVE_DS2760=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_W1 is not set # CONFIG_POWER_AVS is not set CONFIG_POWER_RESET=y # CONFIG_POWER_RESET_BRCMKONA is not set # CONFIG_POWER_RESET_BRCMSTB is not set -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_GPIO_RESTART=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set # CONFIG_POWER_RESET_LTC2952 is not set # CONFIG_POWER_RESET_RESTART is not set # CONFIG_POWER_RESET_VERSATILE is not set CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y # CONFIG_SYSCON_REBOOT_MODE is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_GENERIC_ADC_BATTERY is not set -# CONFIG_TEST_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_BATTERY_DS2780 is not set -# CONFIG_BATTERY_DS2781 is not set -# CONFIG_BATTERY_DS2782 is not set -# CONFIG_BATTERY_LEGO_EV3 is not set -CONFIG_BATTERY_SBS=y -# CONFIG_CHARGER_SBS is not set -# CONFIG_BATTERY_BQ27XXX is not set -CONFIG_BATTERY_MAX17040=y -CONFIG_BATTERY_MAX17042=y -# CONFIG_BATTERY_MAX1721X is not set -# CONFIG_CHARGER_MAX8903 is not set -# CONFIG_CHARGER_LP8727 is not set -# CONFIG_CHARGER_GPIO is not set -# CONFIG_CHARGER_MANAGER is not set -# CONFIG_CHARGER_LTC3651 is not set -# CONFIG_CHARGER_DETECTOR_MAX14656 is not set -# CONFIG_CHARGER_BQ2415X is not set -# CONFIG_CHARGER_BQ24190 is not set -# CONFIG_CHARGER_BQ24257 is not set -# CONFIG_CHARGER_BQ24735 is not set -# CONFIG_CHARGER_BQ25890 is not set -# CONFIG_CHARGER_SMB347 is not set -# CONFIG_BATTERY_GAUGE_LTC2941 is not set -# CONFIG_CHARGER_RT9455 is not set +# CONFIG_NVMEM_REBOOT_MODE is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -2781,6 +1841,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_AS370 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ASPEED is not set # CONFIG_SENSORS_ATXP1 is not set @@ -2815,6 +1876,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set @@ -2841,11 +1903,13 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set -CONFIG_SENSORS_NTC_THERMISTOR=y +# CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_NCT6683 is not set # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NCT7802 is not set # CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +# CONFIG_SENSORS_OCC_P8_I2C is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set CONFIG_SENSORS_PWM_FAN=y @@ -2860,18 +1924,16 @@ CONFIG_SENSORS_PWM_FAN=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_SCH5627 is not set # CONFIG_SENSORS_SCH5636 is not set # CONFIG_SENSORS_STTS751 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_ADC128D818 is not set -# CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set -# CONFIG_SENSORS_INA2XX is not set +CONFIG_SENSORS_INA2XX=y # CONFIG_SENSORS_INA3221 is not set # CONFIG_SENSORS_TC74 is not set # CONFIG_SENSORS_THMC50 is not set @@ -2881,6 +1943,7 @@ CONFIG_SENSORS_PWM_FAN=y # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83773G is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -2891,10 +1954,11 @@ CONFIG_SENSORS_PWM_FAN=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_OF=y -CONFIG_THERMAL_WRITABLE_TRIPS=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set @@ -2904,32 +1968,31 @@ CONFIG_THERMAL_GOV_STEP_WISE=y # CONFIG_THERMAL_GOV_BANG_BANG is not set # CONFIG_THERMAL_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set -CONFIG_CPU_THERMAL=y # CONFIG_CLOCK_THERMAL is not set # CONFIG_DEVFREQ_THERMAL is not set CONFIG_THERMAL_EMULATION=y +# CONFIG_THERMAL_MMIO is not set # CONFIG_QORIQ_THERMAL is not set -# -# ACPI INT340X thermal drivers -# - -# -# Texas Instruments thermal drivers -# -# CONFIG_TI_SOC_THERMAL is not set - # # Samsung thermal drivers # CONFIG_EXYNOS_THERMAL=y +# end of Samsung thermal drivers + # CONFIG_GENERIC_ADC_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_OPEN_TIMEOUT=0 # CONFIG_WATCHDOG_SYSFS is not set +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set + # # Watchdog Device Drivers # @@ -2939,6 +2002,7 @@ CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y # CONFIG_ZIIRAVE_WATCHDOG is not set # CONFIG_ARM_SP805_WATCHDOG is not set # CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_FTWDT010_WATCHDOG is not set CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y # CONFIG_DW_WATCHDOG is not set @@ -2949,16 +2013,7 @@ CONFIG_S3C2410_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set - -# -# Watchdog Pretimeout Governors -# -# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set @@ -2977,9 +2032,7 @@ CONFIG_MFD_CORE=y # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_BD9571MWV is not set # CONFIG_MFD_AXP20X_I2C is not set -CONFIG_MFD_CROS_EC=y -CONFIG_MFD_CROS_EC_I2C=y -CONFIG_MFD_CROS_EC_SPI=y +# CONFIG_MFD_MADERA is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set @@ -2999,14 +2052,15 @@ CONFIG_MFD_CROS_EC_SPI=y # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX14577=y # CONFIG_MFD_MAX77620 is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77650 is not set +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX77693=y # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set +CONFIG_MFD_MAX8997=y # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set @@ -3017,7 +2071,6 @@ CONFIG_MFD_CROS_EC_SPI=y # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_PM8XXX is not set # CONFIG_MFD_RT5033 is not set -# CONFIG_MFD_RTSX_USB is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_RK808 is not set # CONFIG_MFD_RN5T618 is not set @@ -3053,23 +2106,30 @@ CONFIG_MFD_SYSCON=y # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_TQMX86 is not set +# CONFIG_MFD_LOCHNAGAR is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set -CONFIG_MFD_WM8994=m +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_ROHM_BD718XX is not set +# CONFIG_MFD_ROHM_BD70528 is not set +# CONFIG_MFD_STPMIC1 is not set +# CONFIG_MFD_STMFX is not set +# end of Multifunction device drivers + CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_88PG86X is not set # CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_ANATOP is not set # CONFIG_REGULATOR_DA9210 is not set @@ -3084,11 +2144,17 @@ CONFIG_REGULATOR_GPIO=y # CONFIG_REGULATOR_LP8755 is not set # CONFIG_REGULATOR_LTC3589 is not set # CONFIG_REGULATOR_LTC3676 is not set +CONFIG_REGULATOR_MAX14577=y # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_MAX77693=y +CONFIG_REGULATOR_MAX77802=y +# CONFIG_REGULATOR_MCP16502 is not set # CONFIG_REGULATOR_MT6311 is not set # CONFIG_REGULATOR_PFUZE100 is not set # CONFIG_REGULATOR_PV88060 is not set @@ -3098,6 +2164,9 @@ CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y +# CONFIG_REGULATOR_SLG51000 is not set +# CONFIG_REGULATOR_SY8106A is not set +# CONFIG_REGULATOR_SY8824X is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set @@ -3105,77 +2174,30 @@ CONFIG_REGULATOR_S5M8767=y # CONFIG_REGULATOR_TPS65132 is not set # CONFIG_REGULATOR_TPS6524X is not set # CONFIG_REGULATOR_VCTRL is not set -# CONFIG_REGULATOR_WM8994 is not set CONFIG_CEC_CORE=y CONFIG_CEC_NOTIFIER=y -CONFIG_RC_CORE=y -CONFIG_RC_MAP=y -CONFIG_RC_DECODERS=y -CONFIG_LIRC=m -CONFIG_IR_LIRC_CODEC=m -CONFIG_IR_NEC_DECODER=y -CONFIG_IR_RC5_DECODER=y -CONFIG_IR_RC6_DECODER=y -CONFIG_IR_JVC_DECODER=y -CONFIG_IR_SONY_DECODER=y -CONFIG_IR_SANYO_DECODER=y -CONFIG_IR_SHARP_DECODER=y -CONFIG_IR_MCE_KBD_DECODER=y -CONFIG_IR_XMP_DECODER=y -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -# CONFIG_IR_HIX5HD2 is not set -CONFIG_IR_IMON=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_REDRAT3=m -# CONFIG_IR_SPI is not set -CONFIG_IR_STREAMZAP=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -# CONFIG_RC_LOOPBACK is not set -CONFIG_IR_GPIO_CIR=y -CONFIG_IR_GPIOPLUG_CIR=m -# CONFIG_IR_GPIO_TX is not set -# CONFIG_IR_PWM_TX is not set -# CONFIG_IR_SERIAL is not set -# CONFIG_IR_SIR is not set +# CONFIG_RC_CORE is not set CONFIG_MEDIA_SUPPORT=y # # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -CONFIG_MEDIA_SDR_SUPPORT=y +# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set +# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set CONFIG_MEDIA_CEC_SUPPORT=y -# CONFIG_MEDIA_CEC_RC is not set -CONFIG_MEDIA_CONTROLLER=y -CONFIG_MEDIA_CONTROLLER_DVB=y +# CONFIG_MEDIA_CONTROLLER is not set CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L2_I2C=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=y -# CONFIG_V4L2_FLASH_LED_CLASS is not set CONFIG_V4L2_FWNODE=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_DVB_CORE=y -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -# CONFIG_DVB_DYNAMIC_MINORS is not set -# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set # # Media drivers @@ -3185,58 +2207,58 @@ CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # -CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_PWC_INPUT_EVDEV=y @@ -3244,189 +2266,47 @@ CONFIG_VIDEO_CPIA2=m CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160=m -CONFIG_VIDEO_GO7007=m -CONFIG_VIDEO_GO7007_USB=m -CONFIG_VIDEO_GO7007_LOADER=m -CONFIG_VIDEO_GO7007_USB_S2250_BOARD=m - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_DIB3000MC=m -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_FRIIO=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -# CONFIG_DVB_USB_ZD1301 is not set -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set -CONFIG_DVB_AS102=m # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=m CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m - -# -# Software defined radio USB devices -# -CONFIG_USB_AIRSPY=m -CONFIG_USB_HACKRF=m -CONFIG_USB_MSI2500=m # # USB HDMI CEC adapters # -# CONFIG_USB_PULSE8_CEC is not set -# CONFIG_USB_RAINSHADOW_CEC is not set -CONFIG_V4L_PLATFORM_DRIVERS=y -# CONFIG_VIDEO_MUX is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m -CONFIG_VIDEO_EXYNOS4_IS_COMMON=m -CONFIG_VIDEO_S5P_FIMC=m -CONFIG_VIDEO_S5P_MIPI_CSIS=m -CONFIG_VIDEO_EXYNOS_FIMC_LITE=m -CONFIG_VIDEO_EXYNOS4_FIMC_IS=m -CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE=y -# CONFIG_VIDEO_XILINX is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set -CONFIG_VIDEO_SAMSUNG_S5P_JPEG=y -CONFIG_VIDEO_SAMSUNG_S5P_MFC=y -CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=y -# CONFIG_VIDEO_SH_VEU is not set -CONFIG_V4L_TEST_DRIVERS=y -# CONFIG_VIDEO_VIMC is not set -CONFIG_VIDEO_VIVID=m -# CONFIG_VIDEO_VIVID_CEC is not set -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -# CONFIG_VIDEO_VIM2M is not set -CONFIG_DVB_PLATFORM_DRIVERS=y -# CONFIG_DVB_C8SECTPFE is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +# CONFIG_V4L_TEST_DRIVERS is not set CONFIG_CEC_PLATFORM_DRIVERS=y +# CONFIG_CEC_GPIO is not set CONFIG_VIDEO_SAMSUNG_S5P_CEC=y -# CONFIG_SDR_PLATFORM_DRIVERS is not set # # Supported MMC/SDIO adapters # -# CONFIG_SMS_SDIO_DRV is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_RADIO_SI470X is not set -# CONFIG_RADIO_SI4713 is not set -# CONFIG_USB_MR800 is not set -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_SHARK is not set -# CONFIG_RADIO_SHARK2 is not set -# CONFIG_USB_KEENE is not set -# CONFIG_USB_RAREMONO is not set -# CONFIG_USB_MA901 is not set -# CONFIG_RADIO_TEA5764 is not set -# CONFIG_RADIO_SAA7706H is not set -# CONFIG_RADIO_TEF6862 is not set -# CONFIG_RADIO_WL1273 is not set - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -CONFIG_VIDEO_V4L2_TPG=m +# CONFIG_CYPRESS_FIRMWARE is not set +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_V4L2=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_VMALLOC=y # # Media ancillary drivers (tuners, sensors, i2c, spi, frontends) # CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=y +CONFIG_MEDIA_HIDE_ANCILLARY_SUBDRV=y + +# +# I2C drivers hidden by 'Autoselect ancillary drivers' +# # # Audio decoders, processors and mixers # CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_UDA1342=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_SONY_BTF_MPX=m # # RDS decoders @@ -3437,14 +2317,10 @@ CONFIG_VIDEO_SONY_BTF_MPX=m # CONFIG_VIDEO_SAA711X=m CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_TW2804=m -CONFIG_VIDEO_TW9903=m -CONFIG_VIDEO_TW9906=m # # Video and audio decoders # -CONFIG_VIDEO_CX25840=m # # Video encoders @@ -3454,9 +2330,12 @@ CONFIG_VIDEO_CX25840=m # Camera sensor devices # CONFIG_VIDEO_OV2640=m -CONFIG_VIDEO_OV7640=m CONFIG_VIDEO_MT9V011=m +# +# Lens drivers +# + # # Flash devices # @@ -3478,167 +2357,21 @@ CONFIG_VIDEO_MT9V011=m # # -# Sensors used on soc_camera driver +# SPI drivers hidden by 'Autoselect ancillary drivers' # -CONFIG_MEDIA_TUNER=y -CONFIG_MEDIA_TUNER_SIMPLE=y -CONFIG_MEDIA_TUNER_TDA8290=y -CONFIG_MEDIA_TUNER_TDA827X=y -CONFIG_MEDIA_TUNER_TDA18271=y -CONFIG_MEDIA_TUNER_TDA9887=y -CONFIG_MEDIA_TUNER_TEA5761=y -CONFIG_MEDIA_TUNER_TEA5767=y -CONFIG_MEDIA_TUNER_MSI001=m -CONFIG_MEDIA_TUNER_MT20XX=y -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=y -CONFIG_MEDIA_TUNER_XC5000=y -CONFIG_MEDIA_TUNER_XC4000=y -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=y -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m # -# Multistandard (satellite) frontends +# Media SPI Adapters # -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_M88DS3103=m +# end of Media SPI Adapters # -# Multistandard (cable + terrestrial) frontends +# DVB Frontend drivers hidden by 'Autoselect ancillary drivers' # -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_RTL2832_SDR=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m -CONFIG_DVB_GP8PSK_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_SP2=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m # # Tools to develop new frontends # -# CONFIG_DVB_DUMMY_FE is not set # # Graphics support @@ -3653,6 +2386,7 @@ CONFIG_DRM_KMS_FB_HELPER=y CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 CONFIG_DRM_LOAD_EDID_FIRMWARE=y +# CONFIG_DRM_DP_CEC is not set # # I2C encoder or helper chips @@ -3660,29 +2394,43 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE=y # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +# end of I2C encoder or helper chips + +# +# ARM devices +# # CONFIG_DRM_HDLCD is not set # CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_KOMEDA is not set +# end of ARM devices # # ACP (Audio CoProcessor) Configuration # +# end of ACP (Audio CoProcessor) Configuration + # CONFIG_DRM_VGEM is not set +# CONFIG_DRM_VKMS is not set CONFIG_DRM_EXYNOS=y -CONFIG_DRM_EXYNOS_IOMMU=y # # CRTCs # -# CONFIG_DRM_EXYNOS_FIMD is not set -# CONFIG_DRM_EXYNOS5433_DECON is not set +CONFIG_DRM_EXYNOS_FIMD=y +CONFIG_DRM_EXYNOS5433_DECON=y # CONFIG_DRM_EXYNOS7_DECON is not set CONFIG_DRM_EXYNOS_MIXER=y -# CONFIG_DRM_EXYNOS_VIDI is not set +CONFIG_DRM_EXYNOS_VIDI=y # # Encoders and Bridges # +CONFIG_DRM_EXYNOS_DPI=y +CONFIG_DRM_EXYNOS_DSI=y +CONFIG_DRM_EXYNOS_DP=y CONFIG_DRM_EXYNOS_HDMI=y +CONFIG_DRM_EXYNOS_MIC=y # # Sub-drivers @@ -3691,9 +2439,12 @@ CONFIG_DRM_EXYNOS_G2D=y CONFIG_DRM_EXYNOS_IPP=y CONFIG_DRM_EXYNOS_FIMC=y CONFIG_DRM_EXYNOS_ROTATOR=y -# CONFIG_DRM_UDL is not set +CONFIG_DRM_EXYNOS_SCALER=y +CONFIG_DRM_EXYNOS_GSC=y +CONFIG_DRM_UDL=y # CONFIG_DRM_ARMADA is not set # CONFIG_DRM_RCAR_DW_HDMI is not set +# CONFIG_DRM_RCAR_LVDS is not set # CONFIG_DRM_OMAP is not set # CONFIG_DRM_TILCDC is not set # CONFIG_DRM_FSL_DCU is not set @@ -3703,18 +2454,20 @@ CONFIG_DRM_PANEL=y # # Display Panels # -# CONFIG_DRM_PANEL_LVDS is not set -CONFIG_DRM_PANEL_SIMPLE=y -# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set -# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set -CONFIG_DRM_PANEL_SAMSUNG_LD9040=y +# CONFIG_DRM_PANEL_ARM_VERSATILE is not set +# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LB035Q02 is not set # CONFIG_DRM_PANEL_LG_LG4573 is not set -# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set -# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set -CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y -# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set -# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set -# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set +# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set +# end of Display Panels + CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y @@ -3722,70 +2475,62 @@ CONFIG_DRM_PANEL_BRIDGE=y # Display Interface Bridges # # CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_CDNS_DSI is not set # CONFIG_DRM_DUMB_VGA_DAC is not set # CONFIG_DRM_LVDS_ENCODER is not set # CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set -CONFIG_DRM_NXP_PTN3460=y -CONFIG_DRM_PARADE_PS8622=y +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set # CONFIG_DRM_SIL_SII8620 is not set # CONFIG_DRM_SII902X is not set +# CONFIG_DRM_SII9234 is not set +# CONFIG_DRM_THINE_THC63LVD1024 is not set +# CONFIG_DRM_TOSHIBA_TC358764 is not set # CONFIG_DRM_TOSHIBA_TC358767 is not set # CONFIG_DRM_TI_TFP410 is not set +# CONFIG_DRM_TI_SN65DSI86 is not set +CONFIG_DRM_ANALOGIX_DP=y # CONFIG_DRM_I2C_ADV7511 is not set +# end of Display Interface Bridges + # CONFIG_DRM_STI is not set +# CONFIG_DRM_ETNAVIV is not set # CONFIG_DRM_ARCPGU is not set # CONFIG_DRM_MXSFB is not set -# CONFIG_DRM_TINYDRM is not set +# CONFIG_DRM_GM12U320 is not set +# CONFIG_TINYDRM_HX8357D is not set +# CONFIG_TINYDRM_ILI9225 is not set +# CONFIG_TINYDRM_ILI9341 is not set +# CONFIG_TINYDRM_MI0283QT is not set +# CONFIG_TINYDRM_REPAPER is not set +# CONFIG_TINYDRM_ST7586 is not set +# CONFIG_TINYDRM_ST7735R is not set # CONFIG_DRM_PL111 is not set +# CONFIG_DRM_TVE200 is not set +# CONFIG_DRM_LIMA is not set +# CONFIG_DRM_PANFROST is not set +# CONFIG_DRM_MCDE is not set # CONFIG_DRM_LEGACY is not set -# CONFIG_DRM_LIB_RANDOM is not set - -# -# ARM GPU Configuration -# -CONFIG_MALI_MIDGARD=y -# CONFIG_MALI_GATOR_SUPPORT is not set -# CONFIG_MALI_MIDGARD_ENABLE_TRACE is not set -CONFIG_MALI_DEVFREQ=y -CONFIG_MALI_DMA_FENCE=y -CONFIG_MALI_PLATFORM_NAME="devicetree" -CONFIG_MALI_EXPERT=y -# CONFIG_MALI_CORESTACK is not set -# CONFIG_MALI_PRFCNT_SET_SECONDARY is not set -# CONFIG_MALI_DEBUG is not set -# CONFIG_MALI_FENCE_DEBUG is not set -# CONFIG_MALI_NO_MALI is not set -# CONFIG_MALI_TRACE_TIMELINE is not set -# CONFIG_MALI_SYSTEM_TRACE is not set -# CONFIG_MALI_2MB_ALLOC is not set -# CONFIG_MALI_PWRSOFT_765 is not set -CONFIG_MALI_KUTF=m +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y # # Frame buffer Devices # -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y -# CONFIG_FB_DDC is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers @@ -3793,45 +2538,22 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_ARMCLCD is not set # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_S3C is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set -# CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_SIMPLE is not set +CONFIG_FB_SIMPLE=y # CONFIG_FB_SSD1307 is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -# CONFIG_LCD_L4F00242T03 is not set -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_ILI922X is not set -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -CONFIG_LCD_PLATFORM=y -# CONFIG_LCD_S6E63M0 is not set -# CONFIG_LCD_LD9040 is not set -# CONFIG_LCD_AMS369FG06 is not set -# CONFIG_LCD_LMS501KF03 is not set -# CONFIG_LCD_HX8357 is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_BACKLIGHT_PWM=y -# CONFIG_BACKLIGHT_PM8941_WLED is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -# CONFIG_BACKLIGHT_GPIO is not set -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_BACKLIGHT_ARCXCNN is not set -# CONFIG_VGASTATE is not set +# end of Frame buffer Devices + +# +# Backlight & LCD device support +# +# CONFIG_LCD_CLASS_DEVICE is not set +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +# end of Backlight & LCD device support + CONFIG_VIDEOMODE_HELPERS=y CONFIG_HDMI=y @@ -3842,335 +2564,130 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +# end of Console display driver support + CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_PCM_ELD=y -CONFIG_SND_PCM_IEC958=y -CONFIG_SND_DMAENGINE_PCM=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_JACK=y -CONFIG_SND_JACK_INPUT_DEV=y -# CONFIG_SND_OSSEMUL is not set -CONFIG_SND_PCM_TIMER=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_OPL3_LIB_SEQ is not set -# CONFIG_SND_OPL4_LIB_SEQ is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_ALOOP is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_MTS64 is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_PORTMAN2X4 is not set +# end of Graphics support -# -# HD-Audio -# -CONFIG_SND_HDA_PREALLOC_SIZE=64 -CONFIG_SND_ARM=y -# CONFIG_SND_ARMAACI is not set -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_SOC=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -# CONFIG_SND_SOC_AMD_ACP is not set -# CONFIG_SND_ATMEL_SOC is not set -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -# CONFIG_SND_SOC_FSL_ASRC is not set -# CONFIG_SND_SOC_FSL_SAI is not set -# CONFIG_SND_SOC_FSL_SSI is not set -# CONFIG_SND_SOC_FSL_SPDIF is not set -# CONFIG_SND_SOC_FSL_ESAI is not set -# CONFIG_SND_SOC_IMX_AUDMUX is not set -# CONFIG_SND_I2S_HI6210_I2S is not set -# CONFIG_SND_SOC_IMG is not set -CONFIG_SND_SOC_SAMSUNG=y -CONFIG_SND_SAMSUNG_PCM=y -CONFIG_SND_SAMSUNG_SPDIF=m -CONFIG_SND_SAMSUNG_I2S=y -CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m -CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF=m -CONFIG_SND_SOC_SMDK_WM8994_PCM=m -CONFIG_SND_SOC_SNOW=m -CONFIG_SND_SOC_ODROID=y -CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631=m - -# -# STMicroelectronics STM32 SOC audio support -# -# CONFIG_SND_SOC_XTFPGA_I2S is not set -# CONFIG_ZX_TDM is not set -CONFIG_SND_SOC_I2C_AND_SPI=y - -# -# CODEC drivers -# -CONFIG_SND_SOC_WM_HUBS=m -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_ADAU1761_I2C is not set -# CONFIG_SND_SOC_ADAU1761_SPI is not set -# CONFIG_SND_SOC_ADAU7002 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4613 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_ALC5623 is not set -# CONFIG_SND_SOC_BT_SCO is not set -# CONFIG_SND_SOC_CS35L32 is not set -# CONFIG_SND_SOC_CS35L33 is not set -# CONFIG_SND_SOC_CS35L34 is not set -# CONFIG_SND_SOC_CS35L35 is not set -# CONFIG_SND_SOC_CS42L42 is not set -# CONFIG_SND_SOC_CS42L51_I2C is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4265 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271_I2C is not set -# CONFIG_SND_SOC_CS4271_SPI is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_CS43130 is not set -# CONFIG_SND_SOC_CS4349 is not set -# CONFIG_SND_SOC_CS53L30 is not set -# CONFIG_SND_SOC_DIO2125 is not set -CONFIG_SND_SOC_HDMI_CODEC=y -# CONFIG_SND_SOC_ES7134 is not set -# CONFIG_SND_SOC_ES8316 is not set -# CONFIG_SND_SOC_ES8328_I2C is not set -# CONFIG_SND_SOC_ES8328_SPI is not set -# CONFIG_SND_SOC_GTM601 is not set -# CONFIG_SND_SOC_INNO_RK3036 is not set -CONFIG_SND_SOC_MAX98090=y -CONFIG_SND_SOC_MAX98095=m -# CONFIG_SND_SOC_MAX98504 is not set -# CONFIG_SND_SOC_MAX98927 is not set -# CONFIG_SND_SOC_MAX9860 is not set -# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM179X_I2C is not set -# CONFIG_SND_SOC_PCM179X_SPI is not set -# CONFIG_SND_SOC_PCM3168A_I2C is not set -# CONFIG_SND_SOC_PCM3168A_SPI is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -# CONFIG_SND_SOC_RT5616 is not set -CONFIG_SND_SOC_RT5631=m -# CONFIG_SND_SOC_RT5677_SPI is not set -# CONFIG_SND_SOC_SGTL5000 is not set -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -CONFIG_SND_SOC_SPDIF=y -# CONFIG_SND_SOC_SSM2602_SPI is not set -# CONFIG_SND_SOC_SSM2602_I2C is not set -# CONFIG_SND_SOC_SSM4567 is not set -# CONFIG_SND_SOC_STA32X is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_STI_SAS is not set -# CONFIG_SND_SOC_TAS2552 is not set -# CONFIG_SND_SOC_TAS5086 is not set -# CONFIG_SND_SOC_TAS571X is not set -# CONFIG_SND_SOC_TAS5720 is not set -# CONFIG_SND_SOC_TFA9879 is not set -# CONFIG_SND_SOC_TLV320AIC23_I2C is not set -# CONFIG_SND_SOC_TLV320AIC23_SPI is not set -# CONFIG_SND_SOC_TLV320AIC31XX is not set -# CONFIG_SND_SOC_TLV320AIC3X is not set -# CONFIG_SND_SOC_TS3A227E is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8524 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8804_I2C is not set -# CONFIG_SND_SOC_WM8804_SPI is not set -# CONFIG_SND_SOC_WM8903 is not set -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8962 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8978 is not set -# CONFIG_SND_SOC_WM8985 is not set -CONFIG_SND_SOC_WM8994=m -# CONFIG_SND_SOC_ZX_AUD96P22 is not set -# CONFIG_SND_SOC_NAU8540 is not set -# CONFIG_SND_SOC_NAU8810 is not set -# CONFIG_SND_SOC_NAU8824 is not set -# CONFIG_SND_SOC_TPA6130A2 is not set -CONFIG_SND_SIMPLE_CARD_UTILS=y -CONFIG_SND_SIMPLE_CARD=y -# CONFIG_SND_SIMPLE_SCU_CARD is not set -# CONFIG_SND_AUDIO_GRAPH_CARD is not set -# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set +# CONFIG_SOUND is not set # # HID support # CONFIG_HID=y -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set CONFIG_HID_GENERIC=y # # Special HID drivers # -CONFIG_HID_A4TECH=m -CONFIG_HID_ACCUTOUCH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_ASUS=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CMEDIA=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACCUTOUCH is not set +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_COUGAR is not set +# CONFIG_HID_MACALLY is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CREATIVE_SB0540 is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_VIEWSONIC is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set CONFIG_HID_ITE=y -CONFIG_HID_TWINHAN=m +# CONFIG_HID_JABRA is not set +# CONFIG_HID_TWINHAN is not set CONFIG_HID_KENSINGTON=y -CONFIG_HID_LCPOWER=m -CONFIG_HID_LED=m +# CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO is not set CONFIG_HID_LOGITECH=y -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MALTRON is not set # CONFIG_HID_MAYFLASH is not set -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTI=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_RETRODE=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=y -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_UDRAW_PS3=m -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m -CONFIG_HID_ALPS=m +CONFIG_HID_REDRAGON=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=y +# CONFIG_HID_NTI is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_RETRODE is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEAM is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_UDRAW_PS3 is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set +# end of Special HID drivers # # USB HID support # CONFIG_USB_HID=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set +# end of USB HID support # # I2C HID support # -CONFIG_I2C_HID=m +# CONFIG_I2C_HID is not set +# end of I2C HID support +# end of HID support + CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_USB_CONN_GPIO is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -4180,33 +2697,31 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_OTG=y +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_FSM is not set -# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +CONFIG_USB_AUTOSUSPEND_DELAY=2 # CONFIG_USB_MON is not set -# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_DBGCAP is not set CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_EXYNOS=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set +CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FOTG210_HCD is not set # CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_EXYNOS=y -# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_OHCI_HCD_PLATFORM=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_TEST_MODE is not set @@ -4214,9 +2729,9 @@ CONFIG_USB_OHCI_EXYNOS=y # # USB Device Class drivers # -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # @@ -4228,21 +2743,20 @@ CONFIG_USB_WDM=m # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set # # USB Imaging devices @@ -4250,102 +2764,25 @@ CONFIG_USB_UAS=m # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USBIP_CORE is not set +# CONFIG_USB_CDNS3 is not set # CONFIG_USB_MUSB_HDRC is not set CONFIG_USB_DWC3=y -# CONFIG_USB_DWC3_HOST is not set +CONFIG_USB_DWC3_HOST=y # CONFIG_USB_DWC3_GADGET is not set -CONFIG_USB_DWC3_DUAL_ROLE=y # # Platform Glue Driver Support # CONFIG_USB_DWC3_EXYNOS=y CONFIG_USB_DWC3_OF_SIMPLE=y -CONFIG_USB_DWC2=y -# CONFIG_USB_DWC2_HOST is not set - -# -# Gadget/Dual-role mode requires USB Gadget support to be enabled -# -# CONFIG_USB_DWC2_PERIPHERAL is not set -CONFIG_USB_DWC2_DUAL_ROLE=y -# CONFIG_USB_DWC2_DEBUG is not set -# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +# CONFIG_USB_DWC2 is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # -# CONFIG_USB_USS720 is not set -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -# CONFIG_USB_SERIAL_F8153X is not set -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -# CONFIG_USB_SERIAL_UPD78F0730 is not set -# CONFIG_USB_SERIAL_DEBUG is not set +# CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers @@ -4354,7 +2791,6 @@ CONFIG_USB_SERIAL_QT2=m # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_CYPRESS_CY7C63 is not set @@ -4370,28 +2806,27 @@ CONFIG_USB_SERIAL_QT2=m # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set -CONFIG_USB_EZUSB_FX2=m +# CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HUB_USB251XB is not set CONFIG_USB_HSIC_USB3503=y # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set # CONFIG_USB_CHAOSKEY is not set -# CONFIG_USB_ATM is not set # # USB Physical Layer drivers # -# CONFIG_USB_PHY is not set # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set # CONFIG_USB_ULPI is not set +# end of USB Physical Layer drivers + CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 -# CONFIG_U_SERIAL_CONSOLE is not set # # USB Peripheral Controller @@ -4409,46 +2844,13 @@ CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # CONFIG_USB_NET2272 is not set # CONFIG_USB_GADGET_XILINX is not set # CONFIG_USB_DUMMY_HCD is not set -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_F_ACM=m -CONFIG_USB_U_SERIAL=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_F_SERIAL=m -CONFIG_USB_F_OBEX=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -# CONFIG_USB_CONFIGFS is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -CONFIG_USB_MASS_STORAGE=m -CONFIG_USB_G_SERIAL=m -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set +# end of USB Peripheral Controller -# -# USB Power Delivery and Type-C drivers -# -# CONFIG_TYPEC_UCSI is not set -# CONFIG_USB_LED_TRIG is not set -# CONFIG_USB_ULPI_BUS is not set -# CONFIG_UWB is not set +# CONFIG_USB_CONFIGFS is not set +# CONFIG_TYPEC is not set +# CONFIG_USB_ROLE_SWITCH is not set CONFIG_MMC=y CONFIG_PWRSEQ_EMMC=y -# CONFIG_PWRSEQ_SD8787 is not set CONFIG_PWRSEQ_SIMPLE=y CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=16 @@ -4467,76 +2869,19 @@ CONFIG_MMC_SDHCI_S3C_DMA=y # CONFIG_MMC_SPI is not set CONFIG_MMC_DW=y CONFIG_MMC_DW_PLTFM=y +# CONFIG_MMC_DW_BLUEFIELD is not set CONFIG_MMC_DW_EXYNOS=y +# CONFIG_MMC_DW_HI3798CV200 is not set # CONFIG_MMC_DW_K3 is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set # CONFIG_MMC_USDHI6ROL0 is not set +# CONFIG_MMC_CQHCI is not set # CONFIG_MMC_MTK is not set # CONFIG_MEMSTICK is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=y -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set - -# -# LED drivers -# -# CONFIG_LEDS_AAT1290 is not set -# CONFIG_LEDS_AS3645A is not set -# CONFIG_LEDS_BCM6328 is not set -# CONFIG_LEDS_BCM6358 is not set -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_LP3944 is not set -# CONFIG_LEDS_LP3952 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_LP8860 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_PCA963X is not set -# CONFIG_LEDS_DAC124S085 is not set -CONFIG_LEDS_PWM=y -# CONFIG_LEDS_REGULATOR is not set -# CONFIG_LEDS_BD2802 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_TLC591XX is not set -# CONFIG_LEDS_LM355x is not set -# CONFIG_LEDS_KTD2692 is not set -# CONFIG_LEDS_IS31FL319X is not set -# CONFIG_LEDS_IS31FL32XX is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set -# CONFIG_LEDS_SYSCON is not set -# CONFIG_LEDS_USER is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -# CONFIG_LEDS_TRIGGER_TIMER is not set -# CONFIG_LEDS_TRIGGER_ONESHOT is not set -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set -# CONFIG_LEDS_TRIGGER_CPU is not set -# CONFIG_LEDS_TRIGGER_GPIO is not set -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set - -# -# iptables trigger is under Netfilter config (LED target) -# -# CONFIG_LEDS_TRIGGER_TRANSIENT is not set -# CONFIG_LEDS_TRIGGER_CAMERA is not set -# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_RTC_LIB=y @@ -4561,18 +2906,23 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABEOZ9 is not set # CONFIG_RTC_DRV_ABX80X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_HYM8563 is not set # CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_MAX8997 is not set +# CONFIG_RTC_DRV_MAX77686 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_ISL12026 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF85363 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set @@ -4583,8 +2933,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV3028 is not set # CONFIG_RTC_DRV_RV8803 is not set CONFIG_RTC_DRV_S5M=y +# CONFIG_RTC_DRV_SD3078 is not set # # SPI RTC drivers @@ -4640,6 +2992,7 @@ CONFIG_HAVE_S3C_RTC=y CONFIG_RTC_DRV_S3C=y # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set +# CONFIG_RTC_DRV_CADENCE is not set # CONFIG_RTC_DRV_FTRTC010 is not set # CONFIG_RTC_DRV_SNVS is not set # CONFIG_RTC_DRV_R7301 is not set @@ -4647,7 +3000,6 @@ CONFIG_RTC_DRV_S3C=y # # HID Sensor RTC drivers # -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set @@ -4658,7 +3010,9 @@ CONFIG_DMA_ENGINE=y CONFIG_DMA_OF=y # CONFIG_ALTERA_MSGDMA is not set # CONFIG_AMBA_PL08X is not set +# CONFIG_DW_AXI_DMAC is not set # CONFIG_FSL_EDMA is not set +# CONFIG_FSL_QDMA is not set # CONFIG_INTEL_IDMA64 is not set # CONFIG_NBPFAXI_DMA is not set CONFIG_PL330_DMA=y @@ -4677,223 +3031,28 @@ CONFIG_PL330_DMA=y # CONFIG_SYNC_FILE=y # CONFIG_SW_SYNC is not set +# CONFIG_UDMABUF is not set +# CONFIG_DMABUF_SELFTESTS is not set +# end of DMABUF options + # CONFIG_AUXDISPLAY is not set -# CONFIG_PANEL is not set # CONFIG_UIO is not set # CONFIG_VFIO is not set # CONFIG_VIRT_DRIVERS is not set - -# -# Virtio drivers -# +CONFIG_VIRTIO_MENU=y # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # -# CONFIG_HYPERV_TSCPAGE is not set -CONFIG_STAGING=y -CONFIG_IRDA=m +# end of Microsoft Hyper-V guest support -# -# IrDA protocols -# -CONFIG_IRLAN=m -# CONFIG_IRNET is not set -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_MCS_FIR=m -CONFIG_PRISM2_USB=m -# CONFIG_COMEDI is not set -# CONFIG_RTLLIB is not set -# CONFIG_RTL8723BS is not set -CONFIG_R8712U=m -# CONFIG_R8188EU is not set -# CONFIG_VT6656 is not set - -# -# IIO staging drivers -# - -# -# Accelerometers -# -# CONFIG_ADIS16201 is not set -# CONFIG_ADIS16203 is not set -# CONFIG_ADIS16209 is not set -# CONFIG_ADIS16240 is not set - -# -# Analog to digital converters -# -# CONFIG_AD7606 is not set -# CONFIG_AD7780 is not set -# CONFIG_AD7816 is not set -# CONFIG_AD7192 is not set -# CONFIG_AD7280 is not set - -# -# Analog digital bi-direction converters -# -# CONFIG_ADT7316 is not set - -# -# Capacitance to digital converters -# -# CONFIG_AD7150 is not set -# CONFIG_AD7152 is not set -# CONFIG_AD7746 is not set - -# -# Direct Digital Synthesis -# -# CONFIG_AD9832 is not set -# CONFIG_AD9834 is not set - -# -# Digital gyroscope sensors -# -# CONFIG_ADIS16060 is not set - -# -# Network Analyzer, Impedance Converters -# -# CONFIG_AD5933 is not set - -# -# Light sensors -# -# CONFIG_TSL2x7x is not set - -# -# Active energy metering IC -# -# CONFIG_ADE7753 is not set -# CONFIG_ADE7754 is not set -# CONFIG_ADE7758 is not set -# CONFIG_ADE7759 is not set -# CONFIG_ADE7854 is not set - -# -# Resolver to digital converters -# -# CONFIG_AD2S90 is not set -# CONFIG_AD2S1200 is not set -# CONFIG_AD2S1210 is not set - -# -# Triggers - standalone -# - -# -# Speakup console speech -# -# CONFIG_SPEAKUP is not set -CONFIG_STAGING_MEDIA=y -# CONFIG_I2C_BCM2048 is not set -CONFIG_LIRC_STAGING=y -# CONFIG_LIRC_ZILOG is not set -CONFIG_LIRC_ODROID=m - -# -# Android -# -# CONFIG_STAGING_BOARD is not set -# CONFIG_LTE_GDM724X is not set -# CONFIG_LNET is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set -CONFIG_FB_TFT=m -CONFIG_FB_TFT_AGM1264K_FL=m -CONFIG_FB_TFT_BD663474=m -CONFIG_FB_TFT_HX8340BN=m -CONFIG_FB_TFT_HX8347D=m -CONFIG_FB_TFT_HX8353D=m -CONFIG_FB_TFT_HX8357D=m -CONFIG_FB_TFT_ILI9163=m -CONFIG_FB_TFT_ILI9320=m -CONFIG_FB_TFT_ILI9325=m -CONFIG_FB_TFT_ILI9340=m -CONFIG_FB_TFT_ILI9341=m -CONFIG_FB_TFT_ILI9481=m -CONFIG_FB_TFT_ILI9486=m -CONFIG_FB_TFT_PCD8544=m -CONFIG_FB_TFT_RA8875=m -CONFIG_FB_TFT_S6D02A1=m -CONFIG_FB_TFT_S6D1121=m -# CONFIG_FB_TFT_SH1106 is not set -CONFIG_FB_TFT_SSD1289=m -CONFIG_FB_TFT_SSD1305=m -CONFIG_FB_TFT_SSD1306=m -CONFIG_FB_TFT_SSD1325=m -CONFIG_FB_TFT_SSD1331=m -CONFIG_FB_TFT_SSD1351=m -CONFIG_FB_TFT_ST7735R=m -CONFIG_FB_TFT_ST7789V=m -CONFIG_FB_TFT_TINYLCD=m -CONFIG_FB_TFT_TLS8204=m -CONFIG_FB_TFT_UC1611=m -CONFIG_FB_TFT_UC1701=m -CONFIG_FB_TFT_UPD161704=m -CONFIG_FB_TFT_WATTEROTT=m -CONFIG_FB_FLEX=m -CONFIG_FB_TFT_FBTFT_DEVICE=m -# CONFIG_WILC1000_SDIO is not set -# CONFIG_WILC1000_SPI is not set -# CONFIG_MOST is not set -# CONFIG_KS7010 is not set # CONFIG_GREYBUS is not set -# CONFIG_CRYPTO_DEV_CCREE is not set - -# -# USB Power Delivery and Type-C drivers -# -# CONFIG_TYPEC_TCPM is not set -# CONFIG_PI433 is not set +# CONFIG_STAGING is not set # CONFIG_GOLDFISH is not set -CONFIG_CHROME_PLATFORMS=y -# CONFIG_CROS_EC_CHARDEV is not set -CONFIG_CROS_EC_PROTO=y +# CONFIG_MFD_CROS_EC is not set +# CONFIG_CHROME_PLATFORMS is not set +# CONFIG_MELLANOX_PLATFORM is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y @@ -4902,21 +3061,25 @@ CONFIG_COMMON_CLK=y # Common Clock Framework # # CONFIG_CLK_HSDK is not set +CONFIG_COMMON_CLK_MAX77686=y +# CONFIG_COMMON_CLK_MAX9485 is not set +# CONFIG_COMMON_CLK_SI5341 is not set # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI544 is not set # CONFIG_COMMON_CLK_SI570 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_CDCE925 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set CONFIG_COMMON_CLK_S2MPS11=y # CONFIG_CLK_QORIQ is not set -# CONFIG_COMMON_CLK_NXP is not set # CONFIG_COMMON_CLK_PWM is not set -# CONFIG_COMMON_CLK_PXA is not set -# CONFIG_COMMON_CLK_PIC32 is not set # CONFIG_COMMON_CLK_VC5 is not set +# CONFIG_COMMON_CLK_FIXED_MMIO is not set CONFIG_COMMON_CLK_SAMSUNG=y CONFIG_EXYNOS_AUDSS_CLK_CON=y +# end of Common Clock Framework + # CONFIG_HWSPINLOCK is not set # @@ -4926,14 +3089,10 @@ CONFIG_TIMER_OF=y CONFIG_TIMER_PROBE=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_TIMER_SP804 is not set -# CONFIG_ATMEL_PIT is not set CONFIG_CLKSRC_EXYNOS_MCT=y CONFIG_CLKSRC_SAMSUNG_PWM=y -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set +# end of Clock Source drivers + # CONFIG_MAILBOX is not set CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y @@ -4941,8 +3100,15 @@ CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S_SELFTEST is not set +# end of Generic IOMMU Pagetable Support + +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set CONFIG_OF_IOMMU=y CONFIG_EXYNOS_IOMMU=y # CONFIG_EXYNOS_IOMMU_DEBUG is not set @@ -4952,10 +3118,15 @@ CONFIG_EXYNOS_IOMMU=y # Remoteproc drivers # # CONFIG_REMOTEPROC is not set +# end of Remoteproc drivers # # Rpmsg drivers # +# CONFIG_RPMSG_VIRTIO is not set +# end of Rpmsg drivers + +# CONFIG_SOUNDWIRE is not set # # SOC (System On Chip) specific Drivers @@ -4964,34 +3135,57 @@ CONFIG_EXYNOS_IOMMU=y # # Amlogic SoC drivers # +# end of Amlogic SoC drivers + +# +# Aspeed SoC drivers +# +# end of Aspeed SoC drivers # # Broadcom SoC drivers # # CONFIG_SOC_BRCMSTB is not set +# end of Broadcom SoC drivers + +# +# NXP/Freescale QorIQ SoC drivers +# +# end of NXP/Freescale QorIQ SoC drivers # # i.MX SoC drivers # +# end of i.MX SoC drivers # # Qualcomm SoC drivers # +# end of Qualcomm SoC drivers + CONFIG_SOC_SAMSUNG=y +CONFIG_EXYNOS_CHIPID=y CONFIG_EXYNOS_PMU=y CONFIG_EXYNOS_PMU_ARM_DRIVERS=y CONFIG_EXYNOS_PM_DOMAINS=y -# CONFIG_SUNXI_SRAM is not set # CONFIG_SOC_TI is not set + +# +# Xilinx SoC drivers +# +# CONFIG_XILINX_VCU is not set +# end of Xilinx SoC drivers +# end of SOC (System On Chip) specific Drivers + CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y +# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set +# CONFIG_DEVFREQ_GOV_POWERSAVE is not set +# CONFIG_DEVFREQ_GOV_USERSPACE is not set CONFIG_DEVFREQ_GOV_PASSIVE=y # @@ -5001,38 +3195,28 @@ CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y CONFIG_PM_DEVFREQ_EVENT=y CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU=y -CONFIG_EXTCON=y - -# -# Extcon Device Drivers -# -# CONFIG_EXTCON_ADC_JACK is not set -# CONFIG_EXTCON_GPIO is not set -# CONFIG_EXTCON_MAX3355 is not set -# CONFIG_EXTCON_RT8973A is not set -# CONFIG_EXTCON_SM5502 is not set -CONFIG_EXTCON_USB_GPIO=m -# CONFIG_EXTCON_USBC_CROS_EC is not set +# CONFIG_EXTCON is not set CONFIG_MEMORY=y # CONFIG_ARM_PL172_MPMC is not set +CONFIG_PL353_SMC=y CONFIG_SAMSUNG_MC=y CONFIG_EXYNOS_SROM=y CONFIG_IIO=y -CONFIG_IIO_BUFFER=y -# CONFIG_IIO_BUFFER_CB is not set -CONFIG_IIO_KFIFO_BUF=y -CONFIG_IIO_TRIGGERED_BUFFER=y +# CONFIG_IIO_BUFFER is not set # CONFIG_IIO_CONFIGFS is not set -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_TRIGGER is not set # CONFIG_IIO_SW_DEVICE is not set # CONFIG_IIO_SW_TRIGGER is not set # # Accelerometers # +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set # CONFIG_ADXL345_I2C is not set # CONFIG_ADXL345_SPI is not set +# CONFIG_ADXL372_SPI is not set +# CONFIG_ADXL372_I2C is not set # CONFIG_BMA180 is not set # CONFIG_BMA220 is not set # CONFIG_BMC150_ACCEL is not set @@ -5041,7 +3225,6 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_DMARD06 is not set # CONFIG_DMARD09 is not set # CONFIG_DMARD10 is not set -# CONFIG_HID_SENSOR_ACCEL_3D is not set # CONFIG_IIO_ST_ACCEL_3AXIS is not set # CONFIG_KXSD9 is not set # CONFIG_KXCJK1013 is not set @@ -5057,26 +3240,32 @@ CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 # CONFIG_SCA3000 is not set # CONFIG_STK8312 is not set # CONFIG_STK8BA50 is not set +# end of Accelerometers # # Analog to digital converters # +# CONFIG_AD7124 is not set # CONFIG_AD7266 is not set # CONFIG_AD7291 is not set # CONFIG_AD7298 is not set # CONFIG_AD7476 is not set +# CONFIG_AD7606_IFACE_PARALLEL is not set +# CONFIG_AD7606_IFACE_SPI is not set # CONFIG_AD7766 is not set +# CONFIG_AD7768_1 is not set +# CONFIG_AD7780 is not set # CONFIG_AD7791 is not set # CONFIG_AD7793 is not set # CONFIG_AD7887 is not set # CONFIG_AD7923 is not set +# CONFIG_AD7949 is not set # CONFIG_AD799X is not set # CONFIG_CC10001_ADC is not set # CONFIG_ENVELOPE_DETECTOR is not set CONFIG_EXYNOS_ADC=y # CONFIG_HI8435 is not set # CONFIG_HX711 is not set -# CONFIG_INA2XX_ADC is not set # CONFIG_LTC2471 is not set # CONFIG_LTC2485 is not set # CONFIG_LTC2497 is not set @@ -5087,7 +3276,9 @@ CONFIG_EXYNOS_ADC=y # CONFIG_MAX9611 is not set # CONFIG_MCP320X is not set # CONFIG_MCP3422 is not set +# CONFIG_MCP3911 is not set # CONFIG_NAU7802 is not set +# CONFIG_SD_ADC_MODULATOR is not set # CONFIG_TI_ADC081C is not set # CONFIG_TI_ADC0832 is not set # CONFIG_TI_ADC084S021 is not set @@ -5097,37 +3288,48 @@ CONFIG_EXYNOS_ADC=y # CONFIG_TI_ADC161S626 is not set # CONFIG_TI_ADS1015 is not set # CONFIG_TI_ADS7950 is not set +# CONFIG_TI_ADS8344 is not set # CONFIG_TI_ADS8688 is not set +# CONFIG_TI_ADS124S08 is not set # CONFIG_TI_TLC4541 is not set # CONFIG_VF610_ADC is not set +# CONFIG_XILINX_XADC is not set +# end of Analog to digital converters + +# +# Analog Front Ends +# +# CONFIG_IIO_RESCALE is not set +# end of Analog Front Ends # # Amplifiers # # CONFIG_AD8366 is not set +# end of Amplifiers # # Chemical Sensors # # CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_BME680 is not set # CONFIG_CCS811 is not set # CONFIG_IAQCORE is not set +# CONFIG_SENSIRION_SGP30 is not set +# CONFIG_SPS30 is not set # CONFIG_VZ89X is not set -# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set +# end of Chemical Sensors # # Hid Sensor IIO Common # -# CONFIG_HID_SENSOR_IIO_COMMON is not set +# end of Hid Sensor IIO Common # # SSP Sensor Common # # CONFIG_IIO_SSP_SENSORHUB is not set - -# -# Counters -# +# end of SSP Sensor Common # # Digital to analog converters @@ -5142,25 +3344,35 @@ CONFIG_EXYNOS_ADC=y # CONFIG_AD5593R is not set # CONFIG_AD5504 is not set # CONFIG_AD5624R_SPI is not set +# CONFIG_LTC1660 is not set # CONFIG_LTC2632 is not set -# CONFIG_AD5686 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set # CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set # CONFIG_AD5761 is not set # CONFIG_AD5764 is not set # CONFIG_AD5791 is not set # CONFIG_AD7303 is not set # CONFIG_AD8801 is not set # CONFIG_DPOT_DAC is not set +# CONFIG_DS4424 is not set # CONFIG_M62332 is not set # CONFIG_MAX517 is not set # CONFIG_MAX5821 is not set # CONFIG_MCP4725 is not set # CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set +# CONFIG_TI_DAC7311 is not set +# CONFIG_TI_DAC7612 is not set # CONFIG_VF610_DAC is not set +# end of Digital to analog converters # # IIO dummy driver # +# end of IIO dummy driver # # Frequency Synthesizers DDS/PLL @@ -5170,11 +3382,15 @@ CONFIG_EXYNOS_ADC=y # Clock Generator/Distribution # # CONFIG_AD9523 is not set +# end of Clock Generator/Distribution # # Phase-Locked Loop (PLL) frequency synthesizers # # CONFIG_ADF4350 is not set +# CONFIG_ADF4371 is not set +# end of Phase-Locked Loop (PLL) frequency synthesizers +# end of Frequency Synthesizers DDS/PLL # # Digital gyroscope sensors @@ -5185,10 +3401,11 @@ CONFIG_EXYNOS_ADC=y # CONFIG_ADIS16260 is not set # CONFIG_ADXRS450 is not set # CONFIG_BMG160 is not set -# CONFIG_HID_SENSOR_GYRO_3D is not set +# CONFIG_FXAS21002C is not set # CONFIG_MPU3050_I2C is not set # CONFIG_IIO_ST_GYRO_3AXIS is not set # CONFIG_ITG3200 is not set +# end of Digital gyroscope sensors # # Health Sensors @@ -5201,6 +3418,8 @@ CONFIG_EXYNOS_ADC=y # CONFIG_AFE4404 is not set # CONFIG_MAX30100 is not set # CONFIG_MAX30102 is not set +# end of Heart Rate Monitors +# end of Health Sensors # # Humidity sensors @@ -5208,16 +3427,17 @@ CONFIG_EXYNOS_ADC=y # CONFIG_AM2315 is not set # CONFIG_DHT11 is not set # CONFIG_HDC100X is not set -# CONFIG_HID_SENSOR_HUMIDITY is not set # CONFIG_HTS221 is not set # CONFIG_HTU21 is not set # CONFIG_SI7005 is not set # CONFIG_SI7020 is not set +# end of Humidity sensors # # Inertial measurement units # # CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set # CONFIG_ADIS16480 is not set # CONFIG_BMI160_I2C is not set # CONFIG_BMI160_SPI is not set @@ -5225,6 +3445,7 @@ CONFIG_EXYNOS_ADC=y # CONFIG_INV_MPU6050_I2C is not set # CONFIG_INV_MPU6050_SPI is not set # CONFIG_IIO_ST_LSM6DSX is not set +# end of Inertial measurement units # # Light sensors @@ -5239,84 +3460,93 @@ CONFIG_EXYNOS_ADC=y # CONFIG_CM3232 is not set # CONFIG_CM3323 is not set # CONFIG_CM3605 is not set -CONFIG_CM36651=y +# CONFIG_CM36651 is not set # CONFIG_GP2AP020A00F is not set # CONFIG_SENSORS_ISL29018 is not set # CONFIG_SENSORS_ISL29028 is not set # CONFIG_ISL29125 is not set -# CONFIG_HID_SENSOR_ALS is not set -# CONFIG_HID_SENSOR_PROX is not set # CONFIG_JSA1212 is not set # CONFIG_RPR0521 is not set # CONFIG_LTR501 is not set +# CONFIG_LV0104CS is not set # CONFIG_MAX44000 is not set +# CONFIG_MAX44009 is not set +# CONFIG_NOA1305 is not set # CONFIG_OPT3001 is not set # CONFIG_PA12203001 is not set +# CONFIG_SI1133 is not set # CONFIG_SI1145 is not set # CONFIG_STK3310 is not set +# CONFIG_ST_UVIS25 is not set # CONFIG_TCS3414 is not set # CONFIG_TCS3472 is not set # CONFIG_SENSORS_TSL2563 is not set # CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set # CONFIG_TSL4531 is not set # CONFIG_US5182D is not set # CONFIG_VCNL4000 is not set +# CONFIG_VCNL4035 is not set # CONFIG_VEML6070 is not set # CONFIG_VL6180 is not set +# CONFIG_ZOPT2201 is not set +# end of Light sensors # # Magnetometer sensors # # CONFIG_AK8974 is not set -CONFIG_AK8975=y +# CONFIG_AK8975 is not set # CONFIG_AK09911 is not set # CONFIG_BMC150_MAGN_I2C is not set # CONFIG_BMC150_MAGN_SPI is not set # CONFIG_MAG3110 is not set -# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set # CONFIG_MMC35240 is not set # CONFIG_IIO_ST_MAGN_3AXIS is not set # CONFIG_SENSORS_HMC5843_I2C is not set # CONFIG_SENSORS_HMC5843_SPI is not set +# CONFIG_SENSORS_RM3100_I2C is not set +# CONFIG_SENSORS_RM3100_SPI is not set +# end of Magnetometer sensors # # Multiplexers # # CONFIG_IIO_MUX is not set +# end of Multiplexers # # Inclinometer sensors # -# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set -# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set - -# -# Triggers - standalone -# -# CONFIG_IIO_INTERRUPT_TRIGGER is not set -# CONFIG_IIO_SYSFS_TRIGGER is not set +# end of Inclinometer sensors # # Digital potentiometers # +# CONFIG_AD5272 is not set # CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set # CONFIG_MAX5481 is not set # CONFIG_MAX5487 is not set +# CONFIG_MCP4018 is not set # CONFIG_MCP4131 is not set # CONFIG_MCP4531 is not set +# CONFIG_MCP41010 is not set # CONFIG_TPL0102 is not set +# end of Digital potentiometers # # Digital potentiostats # # CONFIG_LMP91000 is not set +# end of Digital potentiostats # # Pressure sensors # # CONFIG_ABP060MG is not set # CONFIG_BMP280 is not set -# CONFIG_HID_SENSOR_PRESS is not set +# CONFIG_DPS310 is not set # CONFIG_HP03 is not set # CONFIG_MPL115_I2C is not set # CONFIG_MPL115_SPI is not set @@ -5327,52 +3557,80 @@ CONFIG_AK8975=y # CONFIG_T5403 is not set # CONFIG_HP206C is not set # CONFIG_ZPA2326 is not set +# end of Pressure sensors # # Lightning sensors # # CONFIG_AS3935 is not set +# end of Lightning sensors # # Proximity and distance sensors # +# CONFIG_ISL29501 is not set # CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_MB1232 is not set +# CONFIG_RFD77402 is not set # CONFIG_SRF04 is not set # CONFIG_SX9500 is not set # CONFIG_SRF08 is not set +# CONFIG_VL53L0X_I2C is not set +# end of Proximity and distance sensors + +# +# Resolver to digital converters +# +# CONFIG_AD2S90 is not set +# CONFIG_AD2S1200 is not set +# end of Resolver to digital converters # # Temperature sensors # # CONFIG_MAXIM_THERMOCOUPLE is not set -# CONFIG_HID_SENSOR_TEMP is not set # CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set # CONFIG_TMP006 is not set # CONFIG_TMP007 is not set # CONFIG_TSYS01 is not set # CONFIG_TSYS02D is not set +# CONFIG_MAX31856 is not set +# end of Temperature sensors + CONFIG_PWM=y CONFIG_PWM_SYSFS=y -# CONFIG_PWM_CROS_EC is not set # CONFIG_PWM_FSL_FTM is not set # CONFIG_PWM_PCA9685 is not set CONFIG_PWM_SAMSUNG=y + +# +# IRQ chip support +# CONFIG_IRQCHIP=y CONFIG_ARM_GIC=y CONFIG_ARM_GIC_MAX_NR=1 CONFIG_GIC_NON_BANKED=y +# CONFIG_AL_FIC is not set +# end of IRQ chip support + # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set -# CONFIG_FMC is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_CADENCE_DP is not set +# CONFIG_PHY_CADENCE_DPHY is not set +# CONFIG_PHY_FSL_IMX8MQ_USB is not set +# CONFIG_PHY_MIXEL_MIPI_DPHY is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_PHY_CPCAP_USB is not set +# CONFIG_PHY_MAPPHONE_MDM6600 is not set +# CONFIG_PHY_OCELOT_SERDES is not set CONFIG_PHY_EXYNOS_DP_VIDEO=y CONFIG_PHY_EXYNOS_MIPI_VIDEO=y # CONFIG_PHY_EXYNOS_PCIE is not set @@ -5382,139 +3640,91 @@ CONFIG_PHY_EXYNOS4X12_USB2=y CONFIG_PHY_EXYNOS5250_USB2=y CONFIG_PHY_EXYNOS5_USBDRD=y CONFIG_PHY_EXYNOS5250_SATA=y +# end of PHY Subsystem + # CONFIG_POWERCAP is not set # CONFIG_MCB is not set - -# -# Performance monitor support -# -CONFIG_ARM_PMU=y # CONFIG_RAS is not set # # Android # # CONFIG_ANDROID is not set +# end of Android + CONFIG_DAX=y CONFIG_NVMEM=y +CONFIG_NVMEM_SYSFS=y + +# +# HW tracing support +# # CONFIG_STM is not set # CONFIG_INTEL_TH is not set -# CONFIG_FPGA is not set +# end of HW tracing support -# -# FSI support -# +# CONFIG_FPGA is not set # CONFIG_FSI is not set # CONFIG_TEE is not set - -# -# ODROID Specific Hardware -# -CONFIG_ODROID_EXYNOS5_SP=m - -# -# Firmware Drivers -# -# CONFIG_FIRMWARE_MEMMAP is not set -CONFIG_HAVE_ARM_SMCCC=y -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# Tegra firmware driver -# +CONFIG_PM_OPP=y +# CONFIG_SIOX is not set +# CONFIG_SLIMBUS is not set +# CONFIG_INTERCONNECT is not set +# CONFIG_COUNTER is not set +# end of Device Drivers # # File systems # CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_VALIDATE_FS_PARSER is not set CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_ENCRYPTION=y -CONFIG_EXT4_FS_ENCRYPTION=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set +# CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -CONFIG_F2FS_FS_SECURITY=y -CONFIG_F2FS_CHECK_FS=y -CONFIG_F2FS_FS_ENCRYPTION=y -# CONFIG_F2FS_FAULT_INJECTION is not set +# CONFIG_F2FS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y -CONFIG_EXPORTFS_BLOCK_OPS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y -CONFIG_FS_ENCRYPTION=y +# CONFIG_FS_ENCRYPTION is not set +# CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=m -# CONFIG_CUSE is not set -CONFIG_OVERLAY_FS=m -# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set -# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_FUSE_FS is not set +# CONFIG_OVERLAY_FS is not set # # Caches # -CONFIG_FSCACHE=m -# CONFIG_FSCACHE_STATS is not set -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -# CONFIG_CACHEFILES is not set +# CONFIG_FSCACHE is not set +# end of Caches # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set +# end of CD-ROM/DVD Filesystems # # DOS/FAT/NT Filesystems @@ -5524,10 +3734,9 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_FAT_DEFAULT_UTF8=y -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set +# end of DOS/FAT/NT Filesystems # # Pseudo filesystems @@ -5541,39 +3750,27 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=y +CONFIG_MEMFD_CREATE=y +# CONFIG_CONFIGFS_FS is not set +# end of Pseudo filesystems + CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_HFSPLUS_FS_POSIX_ACL=y +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y -CONFIG_SQUASHFS=y -CONFIG_SQUASHFS_FILE_CACHE=y -# CONFIG_SQUASHFS_FILE_DIRECT is not set -CONFIG_SQUASHFS_DECOMP_SINGLE=y -# CONFIG_SQUASHFS_DECOMP_MULTI is not set -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -CONFIG_SQUASHFS_ZSTD=y -CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +CONFIG_CRAMFS_BLOCKDEV=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set -CONFIG_MINIX_FS=m +# CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m +# CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set CONFIG_ROMFS_FS=y @@ -5581,279 +3778,115 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set -CONFIG_UFS_FS=m -CONFIG_UFS_FS_WRITE=y -# CONFIG_UFS_DEBUG is not set +# CONFIG_UFS_FS is not set +# CONFIG_EROFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_SWAP=y -CONFIG_NFS_V4_1=y -CONFIG_NFS_V4_2=y -CONFIG_PNFS_FILE_LAYOUT=y -CONFIG_PNFS_BLOCK=y -CONFIG_PNFS_FLEXFILE_LAYOUT=m -CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" -CONFIG_NFS_V4_1_MIGRATION=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_SWAP is not set CONFIG_ROOT_NFS=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -CONFIG_NFSD_BLOCKLAYOUT=y -CONFIG_NFSD_SCSILAYOUT=y -CONFIG_NFSD_FLEXFILELAYOUT=y +# CONFIG_NFSD is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_BACKCHANNEL=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_SUNRPC_DEBUG is not set # CONFIG_CEPH_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_UPCALL=y -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_CIFS_ACL=y -# CONFIG_CIFS_DEBUG is not set -CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_SMB311=y -CONFIG_CIFS_FSCACHE=y -# CONFIG_NCP_FS is not set +# CONFIG_CIFS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -CONFIG_DYNAMIC_DEBUG=y - -# -# Compile-time checks and compiler options -# -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_MAGIC_SYSRQ_SERIAL=y -# CONFIG_DEBUG_KERNEL is not set - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_PAGE_POISONING is not set -# CONFIG_DEBUG_RODATA_TEST is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_DEBUG_MEMORY_INIT=y - -# -# Debug Lockups and Hangs -# -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_INFO=y -# CONFIG_DEBUG_TIMEKEEPING is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -# CONFIG_WW_MUTEX_SELFTEST is not set -CONFIG_STACKTRACE=y -# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set -CONFIG_DEBUG_BUGVERBOSE=y - -# -# RCU Debugging -# -# CONFIG_PROVE_RCU is not set -# CONFIG_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_TRACING=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_HWLAT_TRACER is not set -# CONFIG_ENABLE_DEFAULT_TRACERS is not set -# CONFIG_FTRACE_SYSCALLS is not set -# CONFIG_TRACER_SNAPSHOT is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_UPROBE_EVENTS=y -CONFIG_BPF_EVENTS=y -CONFIG_PROBE_EVENTS=y -# CONFIG_TRACEPOINT_BENCHMARK is not set -# CONFIG_RING_BUFFER_BENCHMARK is not set -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_TRACE_EVAL_MAP_FILE is not set -CONFIG_TRACING_EVENTS_GPIO=y -# CONFIG_DMA_API_DEBUG is not set - -# -# Runtime Testing -# -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_TEST_SORT is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_ASYNC_RAID6_TEST is not set -# CONFIG_TEST_HEXDUMP is not set -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_BITMAP is not set -# CONFIG_TEST_UUID is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_TEST_LKM is not set -# CONFIG_TEST_USER_COPY is not set -# CONFIG_TEST_BPF is not set -# CONFIG_TEST_FIRMWARE is not set -# CONFIG_TEST_SYSCTL is not set -# CONFIG_TEST_UDELAY is not set -# CONFIG_TEST_STATIC_KEYS is not set -# CONFIG_TEST_KMOD is not set -# CONFIG_MEMTEST is not set -# CONFIG_BUG_ON_DATA_CORRUPTION is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set -# CONFIG_UBSAN is not set -CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y -# CONFIG_STRICT_DEVMEM is not set -CONFIG_ARM_UNWIND=y -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_8250 is not set -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_CORESIGHT is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_UNICODE is not set +# end of File systems # # Security options # CONFIG_KEYS=y +# CONFIG_KEYS_REQUEST_CACHE is not set # CONFIG_PERSISTENT_KEYRINGS is not set # CONFIG_BIG_KEYS is not set # CONFIG_TRUSTED_KEYS is not set -CONFIG_ENCRYPTED_KEYS=y +# CONFIG_ENCRYPTED_KEYS is not set # CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set CONFIG_SECURITYFS=y CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set +# CONFIG_FORTIFY_SOURCE is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_ASYNC_PQ=m -CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" + +# +# Kernel hardening options +# + +# +# Memory initialization +# +CONFIG_INIT_STACK_NONE=y +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +# end of Memory initialization +# end of Kernel hardening options +# end of Security options + CONFIG_CRYPTO=y # @@ -5861,176 +3894,176 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=m +CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y -CONFIG_CRYPTO_KPP=m CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_RSA=m -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_USER is not set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_SIMD=m +# CONFIG_CRYPTO_PCRYPT is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Public-key cryptography +# +CONFIG_CRYPTO_RSA=y +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_ECDH is not set +# CONFIG_CRYPTO_ECRDSA is not set # # Authenticated Encryption with Associated Data # -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_ECHAINIV=m +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +# CONFIG_CRYPTO_AEGIS128 is not set +# CONFIG_CRYPTO_SEQIV is not set +# CONFIG_CRYPTO_ECHAINIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=y -CONFIG_CRYPTO_KEYWRAP=m +# CONFIG_CRYPTO_CFB is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_OFB is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set +# CONFIG_CRYPTO_ADIANTUM is not set +# CONFIG_CRYPTO_ESSIV is not set # # Hash modes # -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m +# CONFIG_CRYPTO_CMAC is not set +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRCT10DIF=m -CONFIG_CRYPTO_GHASH=m -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_CRC32 is not set +# CONFIG_CRYPTO_XXHASH is not set +# CONFIG_CRYPTO_CRCT10DIF is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_SHA3 is not set +# CONFIG_CRYPTO_SM3 is not set +# CONFIG_CRYPTO_STREEBOG is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set # # Ciphers # +CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_BLOWFISH_COMMON=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST_COMMON=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SM4 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # # Compression # -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ZSTD is not set # # Random Number Generation # -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -# CONFIG_CRYPTO_DRBG_HASH is not set -# CONFIG_CRYPTO_DRBG_CTR is not set -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_DRBG_MENU is not set +# CONFIG_CRYPTO_JITTERENTROPY is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set # CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set -CONFIG_CRYPTO_DEV_S5P=y -CONFIG_CRYPTO_DEV_EXYNOS_HASH=y -# CONFIG_ASYMMETRIC_KEY_TYPE is not set +# CONFIG_CRYPTO_DEV_S5P is not set +# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set +# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set +# CONFIG_CRYPTO_DEV_SAFEXCEL is not set +# CONFIG_CRYPTO_DEV_CCREE is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set # # Certificates for signature checking # +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set -CONFIG_ARM_CRYPTO=y -CONFIG_CRYPTO_SHA1_ARM=m -CONFIG_CRYPTO_SHA1_ARM_NEON=m -# CONFIG_CRYPTO_SHA1_ARM_CE is not set -# CONFIG_CRYPTO_SHA2_ARM_CE is not set -CONFIG_CRYPTO_SHA256_ARM=m -CONFIG_CRYPTO_SHA512_ARM=m -CONFIG_CRYPTO_AES_ARM=m -CONFIG_CRYPTO_AES_ARM_BS=m -CONFIG_CRYPTO_AES_ARM_CE=m -CONFIG_CRYPTO_GHASH_ARM_CE=m -CONFIG_CRYPTO_CRC32_ARM_CE=m -CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_BINARY_PRINTF=y +# end of Certificates for signature checking # # Library routines # -CONFIG_RAID6_PQ=m +# CONFIG_PACKING is not set CONFIG_BITREVERSE=y CONFIG_HAVE_ARCH_BITREVERSE=y -CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y +# CONFIG_CORDIC is not set +CONFIG_RATIONAL=y CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y @@ -6042,25 +4075,15 @@ CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set +# CONFIG_CRC64 is not set # CONFIG_CRC4 is not set # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set # CONFIG_CRC8 is not set -CONFIG_XXHASH=y -CONFIG_AUDIT_GENERIC=y -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set # CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m CONFIG_LZ4_DECOMPRESS=y -CONFIG_ZSTD_COMPRESS=m -CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y @@ -6077,46 +4100,183 @@ CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y -# CONFIG_DMA_NOOP_OPS is not set -# CONFIG_DMA_VIRT_OPS is not set +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_DMA_DECLARE_COHERENT=y +CONFIG_ARCH_HAS_SETUP_DMA_OPS=y +CONFIG_ARCH_HAS_TEARDOWN_DMA_OPS=y +CONFIG_DMA_REMAP=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +# CONFIG_DMA_API_DEBUG is not set +CONFIG_SGL_ALLOC=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y -CONFIG_LRU_CACHE=m CONFIG_CLZ_TAB=y -# CONFIG_CORDIC is not set -# CONFIG_DDR is not set # CONFIG_IRQ_POLL is not set -CONFIG_MPILIB=m +CONFIG_MPILIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -CONFIG_FONT_7x14=y -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_6x10 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_SG_SPLIT is not set CONFIG_SG_POOL=y -CONFIG_ARCH_HAS_SG_CHAIN=y CONFIG_SBITMAP=y # CONFIG_STRING_SELFTEST is not set -# CONFIG_VIRTUALIZATION is not set +# end of Library routines + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_CALLER is not set +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_DYNAMIC_DEBUG is not set +# end of printk and dmesg options + +# +# Compile-time checks and compiler options +# +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_INSTALL is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +# end of Compile-time checks and compiler options + +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +# CONFIG_DEBUG_KERNEL is not set + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_CC_HAS_KASAN_GENERIC=y +CONFIG_KASAN_STACK=1 +# end of Memory Debugging + +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set + +# +# Debug Lockups and Hangs +# +# end of Debug Lockups and Hangs + +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_WW_MUTEX_SELFTEST is not set +# end of Lock Debugging (spinlocks, mutexes, etc...) + +# CONFIG_STACKTRACE is not set +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +CONFIG_DEBUG_BUGVERBOSE=y + +# +# RCU Debugging +# +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# end of RCU Debugging + +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_REED_SOLOMON_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_STRSCPY is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_XARRAY is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_VMALLOC is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_BLACKHOLE_DEV is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_TEST_MEMCAT_P is not set +# CONFIG_TEST_STACKINIT is not set +# CONFIG_TEST_MEMINIT is not set +# CONFIG_MEMTEST is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_UBSAN is not set +CONFIG_UBSAN_ALIGNMENT=y +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_DEBUG_WX is not set +# CONFIG_UNWINDER_FRAME_POINTER is not set +CONFIG_UNWINDER_ARM=y +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_CORESIGHT is not set +# end of Kernel hacking diff --git a/buildroot-external/board/hardkernel/odroid-xu4/patches/linux/000-odroid_xu4_modified_strobe_timing_for_emmc_hs400_mode.patch b/buildroot-external/board/hardkernel/odroid-xu4/patches/linux/000-odroid_xu4_modified_strobe_timing_for_emmc_hs400_mode.patch deleted file mode 100644 index 6f30398a3..000000000 --- a/buildroot-external/board/hardkernel/odroid-xu4/patches/linux/000-odroid_xu4_modified_strobe_timing_for_emmc_hs400_mode.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi -index d0ae8c5315048..3ccf2c5be034c 100755 ---- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi -+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi -@@ -402,7 +402,7 @@ - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; -- samsung,read-strobe-delay = <90>; -+ samsung,read-strobe-delay = <150>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; - bus-width = <8>; diff --git a/buildroot-external/board/hardkernel/patches/README.md b/buildroot-external/board/hardkernel/patches/README.md new file mode 100644 index 000000000..e6fa21ac7 --- /dev/null +++ b/buildroot-external/board/hardkernel/patches/README.md @@ -0,0 +1,3 @@ +# Kernel +https://github.com/akuster/meta-odroid +https://github.com/superna9999/linux diff --git a/buildroot-external/board/hardkernel/patches/linux/0001-exynos5422-odroidhc1.dts-fix-booting-from-mmc.patch b/buildroot-external/board/hardkernel/patches/linux/0001-exynos5422-odroidhc1.dts-fix-booting-from-mmc.patch new file mode 100644 index 000000000..95d35171d --- /dev/null +++ b/buildroot-external/board/hardkernel/patches/linux/0001-exynos5422-odroidhc1.dts-fix-booting-from-mmc.patch @@ -0,0 +1,72 @@ +From 7041ca0d550d3a9caed54857365cf504eaeea756 Mon Sep 17 00:00:00 2001 +From: Armin Kuster +Date: Fri, 23 Mar 2018 09:02:44 -0700 +Subject: [PATCH] exynos5422-odroidhc1.dts: fix booting from mmc + +Signed-off-by: Armin Kuster +--- + arch/arm/boot/dts/exynos5422-odroidhc1.dts | 37 ++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts +index fb8e8ae..c7adecf 100644 +--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts ++++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts +@@ -11,6 +11,7 @@ + */ + + /dts-v1/; ++#include + #include "exynos5422-odroid-core.dtsi" + + / { +@@ -30,6 +31,14 @@ + }; + }; + ++ emmc_pwrseq: pwrseq { ++ pinctrl-0 = <&emmc_nrst_pin>; ++ pinctrl-names = "default"; ++ compatible = "mmc-pwrseq-emmc"; ++ reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; ++ }; ++ ++ + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; +@@ -211,3 +220,31 @@ + &usbdrd_dwc3_1 { + dr_mode = "host"; + }; ++ ++&mmc_0 { ++ status = "okay"; ++ mmc-pwrseq = <&emmc_pwrseq>; ++ card-detect-delay = <200>; ++ samsung,dw-mshc-ciu-div = <3>; ++ samsung,dw-mshc-sdr-timing = <0 4>; ++ samsung,dw-mshc-ddr-timing = <0 2>; ++ samsung,dw-mshc-hs400-timing = <0 2>; ++ samsung,read-strobe-delay = <90>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; ++ bus-width = <8>; ++ cap-mmc-highspeed; ++ mmc-hs200-1_8v; ++ mmc-hs400-1_8v; ++ vmmc-supply = <&ldo18_reg>; ++ vqmmc-supply = <&ldo3_reg>; ++}; ++ ++&pinctrl_1 { ++ emmc_nrst_pin: emmc-nrst { ++ samsung,pins = "gpd1-0"; ++ samsung,pin-function = ; ++ samsung,pin-pud = ; ++ samsung,pin-drv = ; ++ }; ++}; +-- +2.7.4 + diff --git a/buildroot-external/board/hardkernel/patches/linux/0002-dwc3-add-parkmode_disable_ss_quirk-for-G12A.patch b/buildroot-external/board/hardkernel/patches/linux/0002-dwc3-add-parkmode_disable_ss_quirk-for-G12A.patch new file mode 100644 index 000000000..2d89ed9aa --- /dev/null +++ b/buildroot-external/board/hardkernel/patches/linux/0002-dwc3-add-parkmode_disable_ss_quirk-for-G12A.patch @@ -0,0 +1,106 @@ +From c669757a7564c19d042bc5ac18199bb6f3f4e928 Mon Sep 17 00:00:00 2001 +From: Neil Armstrong +Date: Fri, 27 Sep 2019 15:16:38 +0200 +Subject: [PATCH 1/1] dwc3: add parkmode_disable_ss_quirk for G12A + +Could you validate this fixes the following issue ? +[ 221.141621] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. +[ 221.157631] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 +[ 221.157635] xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead +[ 221.159901] xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command. +[ 221.159961] hub 2-1.1:1.0: hub_ext_port_status failed (err = -22) +[ 221.160076] xhci-hcd xhci-hcd.0.auto: HC died; cleaning up +[ 221.165946] usb 2-1.1-port1: cannot reset (err = -22) + +Cc: Tim +CC: Dongjin Kim +Cc: Jianxin Pan +CC: linux-amlogic@lists.infradead.org +Signed-off-by: Neil Armstrong +--- + Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++ + arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 + + drivers/usb/dwc3/core.c | 5 +++++ + drivers/usb/dwc3/core.h | 4 ++++ + 4 files changed, 12 insertions(+) + +diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt +index 66780a47ad85..c977a3ba2f35 100644 +--- a/Documentation/devicetree/bindings/usb/dwc3.txt ++++ b/Documentation/devicetree/bindings/usb/dwc3.txt +@@ -75,6 +75,8 @@ Optional properties: + from P0 to P1/P2/P3 without delay. + - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check + during HS transmit. ++ - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in ++ park mode are disabled. + - snps,dis_metastability_quirk: when set, disable metastability workaround. + CAUTION: use only if you are absolutely sure of it. + - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal +diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +index 852cf9cf121b..139f24975c0e 100644 +--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi ++++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +@@ -2401,6 +2401,7 @@ + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; ++ snps,parkmode-disable-ss-quirk; + }; + }; + +diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c +index c9bb93a2c81e..f64dba17a50d 100644 +--- a/drivers/usb/dwc3/core.c ++++ b/drivers/usb/dwc3/core.c +@@ -983,6 +983,9 @@ static int dwc3_core_init(struct dwc3 *dwc) + if (dwc->dis_tx_ipgap_linecheck_quirk) + reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; + ++ if (dwc->parkmode_disable_ss_quirk) ++ reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; ++ + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + +@@ -1294,6 +1297,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) + "snps,dis-del-phy-power-chg-quirk"); + dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, + "snps,dis-tx-ipgap-linecheck-quirk"); ++ dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, ++ "snps,parkmode-disable-ss-quirk"); + + dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, + "snps,tx_de_emphasis_quirk"); +diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h +index 3dd783b889cb..ab071163b3b8 100644 +--- a/drivers/usb/dwc3/core.h ++++ b/drivers/usb/dwc3/core.h +@@ -249,6 +249,7 @@ + #define DWC3_GUCTL_HSTINAUTORETRY BIT(14) + + /* Global User Control 1 Register */ ++#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) + #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) + #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) + +@@ -1022,6 +1023,8 @@ struct dwc3_scratchpad_array { + * change quirk. + * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate + * check during HS transmit. ++ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed ++ * instances in park mode. + * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk + * @tx_de_emphasis: Tx de-emphasis value + * 0 - -6dB de-emphasis +@@ -1211,6 +1214,7 @@ struct dwc3 { + unsigned dis_u2_freeclk_exists_quirk:1; + unsigned dis_del_phy_power_chg_quirk:1; + unsigned dis_tx_ipgap_linecheck_quirk:1; ++ unsigned parkmode_disable_ss_quirk:1; + + unsigned tx_de_emphasis_quirk:1; + unsigned tx_de_emphasis:2; +-- +2.17.1 + diff --git a/buildroot-external/board/hardkernel/patches/linux/0003-mali_odroid-xu.patch b/buildroot-external/board/hardkernel/patches/linux/0003-mali_odroid-xu.patch new file mode 100644 index 000000000..9270a4e84 --- /dev/null +++ b/buildroot-external/board/hardkernel/patches/linux/0003-mali_odroid-xu.patch @@ -0,0 +1,92 @@ +ARM: dts: exynos5420: add mali dt bindings and enable mali on Odroid XU3/4 + +Signed-off-by: memeka + +https://github.com/hardkernel/linux/commit/27f16b364e195daefdb8839344c02870ceaf48f2#diff-80dd4bb1cf404a3774bbe37bcfe945c2 + +Upstream-Status: Backport + +Signed-off-by: Armin Kuster + +Index: kernel-source/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +=================================================================== +--- kernel-source.orig/arch/arm/boot/dts/exynos5422-odroid-core.dtsi ++++ kernel-source/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +@@ -417,6 +417,11 @@ + vtmu-supply = <&ldo7_reg>; + }; + ++&mali { ++ mali-supply = <&buck4_reg>; ++ status = "okay"; ++}; ++ + &rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; +Index: kernel-source/arch/arm/boot/dts/exynos5420.dtsi +=================================================================== +--- kernel-source.orig/arch/arm/boot/dts/exynos5420.dtsi ++++ kernel-source/arch/arm/boot/dts/exynos5420.dtsi +@@ -1317,6 +1317,61 @@ + }; + }; + ++ mali: mali@11800000 { ++ compatible = "samsung,exynos5422-mali", "arm,malit6xx", "arm,mali-midgard"; ++ reg = <0x11800000 0x5000>; ++ interrupts = , , ; ++ interrupt-names = "JOB", "MMU", "GPU"; ++ ++ clocks = <&clock CLK_FOUT_VPLL>, <&clock CLK_DOUT_ACLK_G3D>, <&clock CLK_G3D>; ++ clock-names = "fout_vpll", "dout_aclk_g3d", "clk_mali"; ++ ++ operating-points-v2 = <&gpu_opp_table>; ++ ++ status = "disabled"; ++ ++ power_model@0 { ++ compatible = "arm,mali-simple-power-model"; ++ static-coefficient = <2427750>; ++ dynamic-coefficient = <4687>; ++ ts = <20000 2000 (-20) 2>; ++ thermal-zone = "gpu-thermal"; ++ }; ++ }; ++ ++ gpu_opp_table: opp_table0 { ++ compatible = "operating-points-v2"; ++ ++ opp@600000000 { ++ opp-hz = /bits/ 64 <600000000>; ++ opp-microvolt = <1150000>; ++ }; ++ opp@543000000 { ++ opp-hz = /bits/ 64 <543000000>; ++ opp-microvolt = <1037500>; ++ }; ++ opp@480000000 { ++ opp-hz = /bits/ 64 <480000000>; ++ opp-microvolt = <1000000>; ++ }; ++ opp@420000000 { ++ opp-hz = /bits/ 64 <420000000>; ++ opp-microvolt = <962500>; ++ }; ++ opp@350000000 { ++ opp-hz = /bits/ 64 <350000000>; ++ opp-microvolt = <912500>; ++ }; ++ opp@266000000 { ++ opp-hz = /bits/ 64 <266000000>; ++ opp-microvolt = <862500>; ++ }; ++ opp@177000000 { ++ opp-hz = /bits/ 64 <177000000>; ++ opp-microvolt = <812500>; ++ }; ++ }; ++ + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; diff --git a/buildroot-external/board/intel/nuc/kernel.config b/buildroot-external/board/intel/nuc/kernel.config index 6425a815d..43e1899d7 100644 --- a/buildroot-external/board/intel/nuc/kernel.config +++ b/buildroot-external/board/intel/nuc/kernel.config @@ -3,8 +3,6 @@ CONFIG_EFI_STUB=y CONFIG_SCSI_LOWLEVEL=y CONFIG_USB_XHCI_HCD=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y - CONFIG_IGB=y CONFIG_IWLWIFI=m diff --git a/buildroot-external/board/intel/ova/kernel.config b/buildroot-external/board/intel/ova/kernel.config index 72e2e1300..063f8e7e2 100644 --- a/buildroot-external/board/intel/ova/kernel.config +++ b/buildroot-external/board/intel/ova/kernel.config @@ -5,6 +5,7 @@ CONFIG_VMWARE_PVSCSI=y CONFIG_VMWARE_VMCI_VSOCKETS=y CONFIG_VMWARE_VMCI=y CONFIG_VMWARE_BALLOON=y +CONFIG_VMWARE_PVSCSI=y CONFIG_VIRTIO=y CONFIG_VIRTIO_PCI=y @@ -12,12 +13,18 @@ CONFIG_VIRTIO_NET=y CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=m CONFIG_VIRTIO_BLK=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_VIRTIO_VSOCKETS=m +CONFIG_VIRTIO_MMIO=y +CONFIG_SCSI_VIRTIO=y CONFIG_HW_RANDOM_VIRTIO=y CONFIG_SCSI_LOWLEVEL=y CONFIG_USB_XHCI_HCD=y CONFIG_PARAVIRT=y +CONFIG_PARAVIRT_SPINLOCKS=y +CONFIG_VIRT_DRIVERS=y CONFIG_XEN=y CONFIG_HYPERVISOR_GUEST=y @@ -27,4 +34,5 @@ CONFIG_HYPERV_BALLOON=m CONFIG_HYPERV_KEYBOARD=m CONFIG_HYPERV_STORAGE=y CONFIG_HYPERV_NET=y +CONFIG_HYPERV_VSOCKETS=m CONFIG_FB_HYPERV=y diff --git a/buildroot-external/board/orangepi/hassos-hook.sh b/buildroot-external/board/orangepi/hassos-hook.sh deleted file mode 100755 index 9636f0d25..000000000 --- a/buildroot-external/board/orangepi/hassos-hook.sh +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash -# shellcheck disable=SC2155 - -function hassos_pre_image() { - local BOOT_DATA="$(path_boot_dir)" - local SPL="${BINARIES_DIR}/sunxi-spl.bin" - local UBOOT="${BINARIES_DIR}/u-boot.itb" - local spl_img="$(path_spl_img)" - - cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr" - cp "${BINARIES_DIR}/sun50i-h5-orangepi-prime.dtb" "${BOOT_DATA}/sun50i-h5-orangepi-prime.dtb" - cp "${BOARD_DIR}/config.txt" "${BOOT_DATA}/config.txt" - touch "${BOOT_DATA}/cmdline.txt" - - # SPL - create_spl_image - - dd if="${SPL}" of="${spl_img}" conv=notrunc bs=512 seek=16 - dd if="${UBOOT}" of="${spl_img}" conv=notrunc bs=512 seek=80 -} - - -function hassos_post_image() { - convert_disk_image_gz -} diff --git a/buildroot-external/board/orangepi/kernel.config b/buildroot-external/board/orangepi/kernel.config deleted file mode 100644 index 570e83546..000000000 --- a/buildroot-external/board/orangepi/kernel.config +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y - diff --git a/buildroot-external/board/orangepi/patches/README.md b/buildroot-external/board/orangepi/patches/README.md deleted file mode 100644 index 7b1911b5f..000000000 --- a/buildroot-external/board/orangepi/patches/README.md +++ /dev/null @@ -1,5 +0,0 @@ -## Kernel -https://github.com/armbian/build/tree/master/patch/kernel/sunxi-next - -## u-boot -https://github.com/armbian/build/tree/master/patch/u-boot/u-boot-sunxi diff --git a/buildroot-external/board/orangepi/patches/uboot/0020-sunxi-call-fdt_fixup_ethernet-again-to-set-macaddr-f.patch b/buildroot-external/board/orangepi/patches/uboot/0020-sunxi-call-fdt_fixup_ethernet-again-to-set-macaddr-f.patch deleted file mode 100644 index 45dc3ae32..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/0020-sunxi-call-fdt_fixup_ethernet-again-to-set-macaddr-f.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 55d3cc28b37000d1a3d7224c0ba4a808274e0b33 Mon Sep 17 00:00:00 2001 -From: Icenowy Zheng -Date: Fri, 27 Oct 2017 17:25:00 +0800 -Subject: [PATCH 20/20] sunxi: call fdt_fixup_ethernet again to set macaddr for - more aliases - -Sometimes some ethernet aliases do not exist in U-Boot FDT but they -exist in the FDT used to boot the system. In this situation -setup_environment is called again in ft_board_setup to generate macaddr -environment variable for them. However now the call to -fdt_fixup_ethernet is moved before the call of ft_board_setup. - -Call fdt_fixup_ethernet again to add MAC addresses for the extra -ethernet aliases. - -Signed-off-by: Icenowy Zheng ---- - board/sunxi/board.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/board/sunxi/board.c b/board/sunxi/board.c -index 192cf8ca45..0fe70f47cb 100644 ---- a/board/sunxi/board.c -+++ b/board/sunxi/board.c -@@ -751,10 +751,12 @@ int ft_board_setup(void *blob, bd_t *bd) - int __maybe_unused r; - - /* -- * Call setup_environment again in case the boot fdt has -- * ethernet aliases the u-boot copy does not have. -+ * Call setup_environment and fdt_fixup_ethernet again -+ * in case the boot fdt has ethernet aliases the u-boot -+ * copy does not have. - */ - setup_environment(blob); -+ fdt_fixup_ethernet(blob); - - #ifdef CONFIG_VIDEO_DT_SIMPLEFB - r = sunxi_simplefb_setup(blob); --- -2.13.6 diff --git a/buildroot-external/board/orangepi/patches/uboot/4kfix-limit-screen-to-full-hd.patch b/buildroot-external/board/orangepi/patches/uboot/4kfix-limit-screen-to-full-hd.patch deleted file mode 100644 index 7abe749fc..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/4kfix-limit-screen-to-full-hd.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff --git a/drivers/video/sunxi/sunxi_display.c b/drivers/video/sunxi/sunxi_display.c -index 92c9d06054..cd16d69e30 100644 ---- a/drivers/video/sunxi/sunxi_display.c -+++ b/drivers/video/sunxi/sunxi_display.c -@@ -1274,8 +1274,12 @@ void *video_hw_init(void) - ret = sunxi_hdmi_hpd_detect(hpd_delay); - if (ret) { - printf("HDMI connected: "); -- if (edid && sunxi_hdmi_edid_get_mode(&custom) == 0) -- mode = &custom; -+ if (edid && sunxi_hdmi_edid_get_mode(&custom) == 0) { -+ if ((custom.xres <= 1920) && (custom.yres <= 1080)) -+ mode = &custom; -+ else -+ mode = &res_mode_init[RES_MODE_1920x1080]; -+ } - } else if (hpd) { - sunxi_hdmi_shutdown(); - sunxi_display.monitor = sunxi_get_default_mon(false); diff --git a/buildroot-external/board/orangepi/patches/uboot/adjust-default-dram-clockspeeds.patch b/buildroot-external/board/orangepi/patches/uboot/adjust-default-dram-clockspeeds.patch deleted file mode 100644 index 5156fd2d6..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/adjust-default-dram-clockspeeds.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig -index 103936d772..990cf2a8c0 100644 ---- a/configs/orangepi_prime_defconfig -+++ b/configs/orangepi_prime_defconfig -@@ -1,7 +1,7 @@ - CONFIG_ARM=y - CONFIG_ARCH_SUNXI=y - CONFIG_MACH_SUN50I_H5=y --CONFIG_DRAM_CLK=672 -+CONFIG_DRAM_CLK=624 - CONFIG_DRAM_ZQ=3881977 - CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime" - # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/buildroot-external/board/orangepi/patches/uboot/do-not-relocate-initrd.patch b/buildroot-external/board/orangepi/patches/uboot/do-not-relocate-initrd.patch deleted file mode 100644 index f5020ded0..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/do-not-relocate-initrd.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h -index 64a190059a..bbec551cac 100644 ---- a/include/configs/sunxi-common.h -+++ b/include/configs/sunxi-common.h -@@ -503,6 +503,12 @@ extern int soft_i2c_gpio_scl; - #define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb" - #endif - -+#ifdef CONFIG_MACH_SUN8I_H3 -+#define INITRD_HIGH_ENV "initrd_high=0xFFFFFFFF\0" -+#else -+#define INITRD_HIGH_ENV -+#endif -+ - #define CONFIG_EXTRA_ENV_SETTINGS \ - CONSOLE_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ -@@ -512,7 +518,8 @@ extern int soft_i2c_gpio_scl; - SUNXI_MTDIDS_DEFAULT \ - SUNXI_MTDPARTS_DEFAULT \ - BOOTCMD_SUNXI_COMPAT \ -- BOOTENV -+ BOOTENV \ -+ INITRD_HIGH_ENV - - #else /* ifndef CONFIG_SPL_BUILD */ - #define CONFIG_EXTRA_ENV_SETTINGS diff --git a/buildroot-external/board/orangepi/patches/uboot/enable-DT-overlays-support.patch b/buildroot-external/board/orangepi/patches/uboot/enable-DT-overlays-support.patch deleted file mode 100644 index fd5ed2039..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/enable-DT-overlays-support.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig -index 0ed36cded..822ebb812 100644 ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -578,6 +578,8 @@ config ARCH_SUNXI - select CMD_GPIO - select CMD_MMC if MMC - select CMD_USB if DISTRO_DEFAULTS -+ select OF_LIBFDT -+ select OF_LIBFDT_OVERLAY - select DM - select DM_ETH - select DM_GPIO diff --git a/buildroot-external/board/orangepi/patches/uboot/enable-r_pio-gpio-access-h3-h5.patch b/buildroot-external/board/orangepi/patches/uboot/enable-r_pio-gpio-access-h3-h5.patch deleted file mode 100644 index 1ff273de7..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/enable-r_pio-gpio-access-h3-h5.patch +++ /dev/null @@ -1,24 +0,0 @@ -diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c -index 7ac8360..0484e7a 100644 ---- a/arch/arm/mach-sunxi/board.c -+++ b/arch/arm/mach-sunxi/board.c -@@ -23,6 +23,7 @@ - #include - #include - #include -+#include - - #include - -@@ -65,6 +66,11 @@ struct mm_region *mem_map = sunxi_mem_map; - - static int gpio_init(void) - { -+#if defined(CONFIG_MACH_SUNXI_H3_H5) -+ /* enable R_PIO GPIO access */ -+ prcm_apb0_enable(PRCM_APB0_GATE_PIO); -+#endif -+ - #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) - #if defined(CONFIG_MACH_SUN4I) || \ - defined(CONFIG_MACH_SUN7I) || \ diff --git a/buildroot-external/board/orangepi/patches/uboot/fdt-setprop-fix-unaligned-access.patch b/buildroot-external/board/orangepi/patches/uboot/fdt-setprop-fix-unaligned-access.patch deleted file mode 100644 index 882ceaa08..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/fdt-setprop-fix-unaligned-access.patch +++ /dev/null @@ -1,23 +0,0 @@ -diff --git a/cmd/fdt.c b/cmd/fdt.c -index d7654b2c4f..a71b7713a8 100644 ---- a/cmd/fdt.c -+++ b/cmd/fdt.c -@@ -17,6 +17,7 @@ - #include - #include - #include -+#include - - #define MAX_LEVEL 32 /* how deeply nested we will go */ - #define SCRATCHPAD 1024 /* bytes of scratchpad memory */ -@@ -781,7 +782,10 @@ static int fdt_parse_prop(char * const *newval, int count, char *data, int *len) - cp = newp; - tmp = simple_strtoul(cp, &newp, 0); - if (*cp != '?') -- *(fdt32_t *)data = cpu_to_fdt32(tmp); -+ { -+ tmp = cpu_to_fdt32(tmp); -+ put_unaligned(tmp, (fdt32_t *)data); -+ } - else - newp++; diff --git a/buildroot-external/board/orangepi/patches/uboot/h3-Fix-PLL1-setup-to-never-use-dividers.patch b/buildroot-external/board/orangepi/patches/uboot/h3-Fix-PLL1-setup-to-never-use-dividers.patch deleted file mode 100644 index f8163ffd3..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/h3-Fix-PLL1-setup-to-never-use-dividers.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 7f5071f906f79bdc99d6b4b0ccf0cb280abe740b Mon Sep 17 00:00:00 2001 -From: Ondrej Jirman -Date: Tue, 20 Dec 2016 11:25:12 +0100 -Subject: [PATCH] sunxi: h3: Fix PLL1 setup to never use dividers - -Kernel would lower the divider on first CLK change and cause the -lock up. ---- - arch/arm/mach-sunxi/clock_sun6i.c | 7 +++---- - 1 file changed, 3 insertions(+), 4 deletions(-) - -diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c -index 50fb302a19..91aa2a0478 100644 ---- a/arch/arm/mach-sunxi/clock_sun6i.c -+++ b/arch/arm/mach-sunxi/clock_sun6i.c -@@ -94,11 +94,10 @@ void clock_set_pll1(unsigned int clk) - int k = 1; - int m = 1; - -- if (clk > 1152000000) { -- k = 2; -- } else if (clk > 768000000) { -+ if (clk >= 1368000000) { - k = 3; -- m = 2; -+ } else if (clk >= 768000000) { -+ k = 2; - } - - /* Switch to 24MHz clock while changing PLL1 */ --- -2.11.0 diff --git a/buildroot-external/board/orangepi/patches/uboot/h3-enable-power-led.patch b/buildroot-external/board/orangepi/patches/uboot/h3-enable-power-led.patch deleted file mode 100644 index 1082db0ba..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/h3-enable-power-led.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff --git a/board/sunxi/board.c b/board/sunxi/board.c -index 3cf3614..89cf7f5 100644 ---- a/board/sunxi/board.c -+++ b/board/sunxi/board.c -@@ -478,6 +478,11 @@ void sunxi_board_init(void) - int power_failed = 0; - unsigned long ramsize; - -+#ifdef CONFIG_MACH_SUN8I_H3 -+ /* turn on power LED (PL10) on H3 boards */ -+ gpio_direction_output(SUNXI_GPL(10), 1); -+#endif -+ - #ifdef CONFIG_SY8106A_POWER - power_failed = sy8106a_set_vout1(CONFIG_SY8106A_VOUT1_VOLT); - #endif diff --git a/buildroot-external/board/orangepi/patches/uboot/h3-set-safe-axi_apb-clock-dividers.patch b/buildroot-external/board/orangepi/patches/uboot/h3-set-safe-axi_apb-clock-dividers.patch deleted file mode 100644 index a59c4b178..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/h3-set-safe-axi_apb-clock-dividers.patch +++ /dev/null @@ -1,42 +0,0 @@ -diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c -index 15272c9..cedddc2 100644 ---- a/arch/arm/mach-sunxi/clock_sun6i.c -+++ b/arch/arm/mach-sunxi/clock_sun6i.c -@@ -117,8 +117,8 @@ void clock_set_pll1(unsigned int clk) - sdelay(200); - - /* Switch CPU to PLL1 */ -- writel(AXI_DIV_3 << AXI_DIV_SHIFT | -- ATB_DIV_2 << ATB_DIV_SHIFT | -+ writel(AXI_DIV_4 << AXI_DIV_SHIFT | -+ ATB_DIV_4 << ATB_DIV_SHIFT | - CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, - &ccm->cpu_axi_cfg); - } -diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h -index f2990db..b3a8575 100644 ---- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h -+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h -@@ -180,6 +180,7 @@ struct sunxi_ccm_reg { - #define CCM_PLL1_CTRL_N(n) ((((n) - 1) & 0x1f) << 8) - #define CCM_PLL1_CTRL_P(n) (((n) & 0x3) << 16) - #define CCM_PLL1_CTRL_EN (0x1 << 31) -+#define CCM_PLL1_CTRL_LOCK (0x1 << 28) - - #define CCM_PLL3_CTRL_M_SHIFT 0 - #define CCM_PLL3_CTRL_M_MASK (0xf << CCM_PLL3_CTRL_M_SHIFT) -diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c -index cedddc2..3fe9305 100644 ---- a/arch/arm/mach-sunxi/clock_sun6i.c -+++ b/arch/arm/mach-sunxi/clock_sun6i.c -@@ -114,7 +114,9 @@ void clock_set_pll1(unsigned int clk) - writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) | - CCM_PLL1_CTRL_N(clk / (24000000 * k / m)) | - CCM_PLL1_CTRL_K(k) | CCM_PLL1_CTRL_M(m), &ccm->pll1_cfg); -- sdelay(200); -+ -+ while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_CTRL_LOCK)) -+ ; - - /* Switch CPU to PLL1 */ - writel(AXI_DIV_4 << AXI_DIV_SHIFT | diff --git a/buildroot-external/board/orangepi/patches/uboot/lower-default-DRAM-freq-A64-H5.patch.disabled b/buildroot-external/board/orangepi/patches/uboot/lower-default-DRAM-freq-A64-H5.patch.disabled deleted file mode 100644 index d94120f20..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/lower-default-DRAM-freq-A64-H5.patch.disabled +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig -index 2309f59999..716e9c5e26 100644 ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -278,7 +278,7 @@ config DRAM_CLK - default 312 if MACH_SUN6I || MACH_SUN8I - default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \ - MACH_SUN8I_V3S -- default 672 if MACH_SUN50I -+ default 648 if MACH_SUN50I || MACH_SUN50I_H5 - ---help--- - Set the dram clock speed, valid range 240 - 480 (prior to sun9i), - must be a multiple of 24. For the sun9i (A80), the tested values diff --git a/buildroot-external/board/orangepi/patches/uboot/sun8i-set-machid.patch b/buildroot-external/board/orangepi/patches/uboot/sun8i-set-machid.patch deleted file mode 100644 index e11f4f600..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/sun8i-set-machid.patch +++ /dev/null @@ -1,11 +0,0 @@ -diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h -index a4c3fb69e..47ce2e9e6 100644 ---- a/include/configs/sun8i.h -+++ b/include/configs/sun8i.h -@@ -30,4 +30,6 @@ - */ - #include - -+#define CONFIG_MACH_TYPE (0x1029) -+ - #endif /* __CONFIG_H */ diff --git a/buildroot-external/board/orangepi/patches/uboot/sunxi-boot-splash.patch b/buildroot-external/board/orangepi/patches/uboot/sunxi-boot-splash.patch deleted file mode 100644 index 8577d1912..000000000 --- a/buildroot-external/board/orangepi/patches/uboot/sunxi-boot-splash.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff --git a/cmd/Kconfig b/cmd/Kconfig -index d6d130edfa..92795119ea 100644 ---- a/cmd/Kconfig -+++ b/cmd/Kconfig -@@ -1029,6 +1029,7 @@ menu "Misc commands" - config CMD_BMP - bool "Enable 'bmp' command" - depends on LCD || DM_VIDEO || VIDEO -+ default y - help - This provides a way to obtain information about a BMP-format iamge - and to display it. BMP (which presumably stands for BitMaP) is a -diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h -index 9ed6b9892c..75d5176edf 100644 ---- a/include/config_distro_bootcmd.h -+++ b/include/config_distro_bootcmd.h -@@ -323,6 +323,15 @@ - BOOTENV_SHARED_UBIFS \ - BOOTENV_SHARED_EFI \ - "boot_prefixes=/ /boot/\0" \ -+ "splashpos=m,m\0" \ -+ "splashimage=66000000\0" \ -+ "loadsplash= " \ -+ "for prefix in ${boot_prefixes}; do " \ -+ "if test -e mmc 0 ${prefix}boot.bmp; then " \ -+ "load mmc 0 ${splashimage} ${prefix}boot.bmp; " \ -+ "bmp d ${splashimage}; " \ -+ "fi; " \ -+ "done\0" \ - "boot_scripts=boot.scr.uimg boot.scr\0" \ - "boot_script_dhcp=boot.scr.uimg\0" \ - BOOTENV_BOOT_TARGETS \ -diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h -index 02d7be0849..cbdea20d08 100644 ---- a/include/configs/sunxi-common.h -+++ b/include/configs/sunxi-common.h -@@ -284,6 +284,16 @@ extern int soft_i2c_gpio_scl; - - #endif /* CONFIG_VIDEO */ - -+#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO -+#define CONFIG_VIDEO_LOGO -+#define CONFIG_SPLASH_SCREEN -+#define CONFIG_SPLASH_SCREEN_ALIGN -+#define CONFIG_BMP_16BPP -+#define CONFIG_BMP_24BPP -+#define CONFIG_BMP_32BPP -+#define CONFIG_VIDEO_BMP_RLE8 -+#endif -+ - /* Ethernet support */ - #ifdef CONFIG_SUNXI_EMAC - #define CONFIG_PHY_ADDR 1 -@@ -444,7 +454,7 @@ extern int soft_i2c_gpio_scl; - - #ifdef CONFIG_USB_KEYBOARD - #define CONSOLE_STDIN_SETTINGS \ -- "preboot=usb start\0" \ -+ "preboot=run loadsplash; usb start\0" \ - "stdin=serial,usbkbd\0" - #else - #define CONSOLE_STDIN_SETTINGS \ diff --git a/buildroot-external/board/orangepi/prime/config.txt b/buildroot-external/board/orangepi/prime/config.txt deleted file mode 100644 index 982ca9256..000000000 --- a/buildroot-external/board/orangepi/prime/config.txt +++ /dev/null @@ -1,3 +0,0 @@ -i2c0_enable=true -i2c1_enable=false -i2c2_enable=false diff --git a/buildroot-external/board/orangepi/prime/meta b/buildroot-external/board/orangepi/prime/meta deleted file mode 100644 index 14ad302e9..000000000 --- a/buildroot-external/board/orangepi/prime/meta +++ /dev/null @@ -1,7 +0,0 @@ -BOARD_ID=opi-prime -BOARD_NAME="Orange Pi Prime" -CHASSIS=embedded -BOOTLOADER=uboot -KERNEL_FILE=Image -BOOT_SYS=spl -BOOT_ENV_SIZE=0x8000 diff --git a/buildroot-external/board/raspberrypi/boot-env.txt b/buildroot-external/board/raspberrypi/boot-env.txt index fcfe987a0..e8922832a 100644 --- a/buildroot-external/board/raspberrypi/boot-env.txt +++ b/buildroot-external/board/raspberrypi/boot-env.txt @@ -1,1137 +1,67 @@ -################################################################################ -## Raspberry Pi Configuration Settings -## -## Revision 16, 2013/06/22 -## -## Details taken from the eLinux wiki -## For up-to-date information please refer to wiki page. -## -## Wiki Location : http://elinux.org/RPiconfig -## -## -## Description: -## Details of each setting are described with each section that begins with -## a double hashed comment ('##') -## It is up to the user to remove the single hashed comment ('#') from each -## option they want to enable, and to set the specific value of that option. -## -## Overclock settings will be disabled at runtime if the SoC reaches temp_limit -## -################################################################################ +# For more options and information see +# http://rpf.io/configtxt +# Some settings may impact device functionality. See link above for details -################################################################################ -## HassOS - don't change it! -################################################################################ +# HassOS - don't change it! +disable_splash=1 kernel=u-boot.bin -################################################################################ -## Standard Definition Video Settings -################################################################################ +# uncomment for aarch64 bit support +#arm_64bit=1 -## sdtv_mode -## defines the TV standard for composite output -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Normal NTSC (Default) -## 1 Japanese version of NTSC - no pedestal -## 2 Normal PAL -## 3 Brazilian version of PAL - 525/60 rather than 625/50, different -## subcarrier -## -#sdtv_mode=0 - -## sdtv_aspect -## defines the aspect ratio for composite output -## -## Value Description -## ------------------------------------------------------------------------- -## 1 4:3 (Default) -## 2 14:9 -## 3 16:9 -## -#sdtv_aspect=1 - -## sdtv_disable_colourburst -## Disables colour burst on composite output. The picture will be -## monochrome, but possibly sharper -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Colour burst is enabled (Default) -## 1 Colour burst is disabled -## -#sdtv_disable_colourburst=1 - -################################################################################ -## High Definition Video Settings -################################################################################ - -## hdmi_safe -## Use "safe mode" settings to try to boot with maximum hdmi compatibility. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Enabled (this does: hdmi_force_hotplug=1, -## hdmi_ignore_edid=0xa5000080, -## config_hdmi_boost=4, hdmi_group=2, -## hdmi_mode=4, disable_overscan=0, -## overscan_left=24, overscan_right=24, -## overscan_top=24, overscan_bottom=24) -## +# uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 -## hdmi_force_hotplug -## Pretends HDMI hotplug signal is asserted so it appears a HDMI display -## is attached -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Use HDMI mode even if no HDMI monitor is detected -## -#hdmi_force_hotplug=1 - -## hdmi_ignore_hotplug -## Pretends HDMI hotplug signal is not asserted so it appears a HDMI -## display is not attached -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Use composite mode even if HDMI monitor is detected -## -#hdmi_ignore_hotplug=1 - -## hdmi_drive -## chooses between HDMI and DVI modes -## -## Value Description -## ------------------------------------------------------------------------- -## 1 Normal DVI mode (No sound) -## 2 Normal HDMI mode (Sound will be sent if supported and enabled) -## -#hdmi_drive=2 - -## hdmi_ignore_edid -## Enables the ignoring of EDID/display data -## -#hdmi_ignore_edid=0xa5000080 - -## hdmi_edid_file -## Read the EDID data from the edid.dat file instead of from the attached -## device -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Read EDID data from attached device (Default) -## 1 Read EDID data from edid.txt file -## -#hdmi_edid_file=1 - -## hdmi_ignore_edid_audio -## Pretends all audio formats are unsupported by display. This means ALSA -## will default to analogue. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 Pretend all audio formats are unsupported -## -#hdmi_ignore_edid_audio=1 - -## hdmi_force_edid_audio -## Pretends all audio formats are supported by display, allowing -## passthrough of DTS/AC3 even when not reported as supported. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 Pretend all audio formats are supported -## -#hdmi_force_edid_audio=1 - -## hdmi_force_edid_3d -## Pretends all CEA modes support 3D even when edid doesn't indicate -## support for them. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 Pretend 3D mode is supported -## -#hdmi_force_edid_3d=1 - -## avoid_edid_fuzzy_match -## Avoid fuzzy matching of modes described in edid. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use fuzzy matching (Default) -## 1 Avoid fuzzy matching -## -#avoid_edid_fuzzy_match=1 - -## hdmi_pixel_encoding -## Force the pixel encoding mode. -## By default it will use the mode requested from edid so shouldn't -## need changing. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 RGB limited (16-235) -## 2 RGB full ( 0-255) -## 3 YCbCr limited (16-235) -## 4 YCbCr limited ( 0-255) -## -#hdmi_pixel_encoding=1 - -## hdmi_group -## Defines the HDMI type -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use the preferred group reported by the edid (Default) -## 1 CEA -## 2 DMT -## -#hdmi_group=1 - -## hdmi_mode -## defines screen resolution in CEA or DMT format -## -## H means 16:9 variant (of a normally 4:3 mode). -## 2x means pixel doubled (i.e. higher clock rate, with each pixel repeated -## twice) -## 4x means pixel quadrupled (i.e. higher clock rate, with each pixel -## repeated four times) -## reduced blanking means fewer bytes are used for blanking within the data -## stream (i.e. lower clock rate, with fewer wasted bytes) -## -## Value hdmi_group=CEA hdmi_group=DMT -## ------------------------------------------------------------------------- -## 1 VGA 640x350 85Hz -## 2 480p 60Hz 640x400 85Hz -## 3 480p 60Hz H 720x400 85Hz -## 4 720p 60Hz 640x480 60Hz -## 5 1080i 60Hz 640x480 72Hz -## 6 480i 60Hz 640x480 75Hz -## 7 480i 60Hz H 640x480 85Hz -## 8 240p 60Hz 800x600 56Hz -## 9 240p 60Hz H 800x600 60Hz -## 10 480i 60Hz 4x 800x600 72Hz -## 11 480i 60Hz 4x H 800x600 75Hz -## 12 240p 60Hz 4x 800x600 85Hz -## 13 240p 60Hz 4x H 800x600 120Hz -## 14 480p 60Hz 2x 848x480 60Hz -## 15 480p 60Hz 2x H 1024x768 43Hz DO NOT USE -## 16 1080p 60Hz 1024x768 60Hz -## 17 576p 50Hz 1024x768 70Hz -## 18 576p 50Hz H 1024x768 75Hz -## 19 720p 50Hz 1024x768 85Hz -## 20 1080i 50Hz 1024x768 120Hz -## 21 576i 50Hz 1152x864 75Hz -## 22 576i 50Hz H 1280x768 reduced blanking -## 23 288p 50Hz 1280x768 60Hz -## 24 288p 50Hz H 1280x768 75Hz -## 25 576i 50Hz 4x 1280x768 85Hz -## 26 576i 50Hz 4x H 1280x768 120Hz reduced blanking -## 27 288p 50Hz 4x 1280x800 reduced blanking -## 28 288p 50Hz 4x H 1280x800 60Hz -## 29 576p 50Hz 2x 1280x800 75Hz -## 30 576p 50Hz 2x H 1280x800 85Hz -## 31 1080p 50Hz 1280x800 120Hz reduced blanking -## 32 1080p 24Hz 1280x960 60Hz -## 33 1080p 25Hz 1280x960 85Hz -## 34 1080p 30Hz 1280x960 120Hz reduced blanking -## 35 480p 60Hz 4x 1280x1024 60Hz -## 36 480p 60Hz 4x H 1280x1024 75Hz -## 37 576p 50Hz 4x 1280x1024 85Hz -## 38 576p 50Hz 4x H 1280x1024 120Hz reduced blanking -## 39 1080i 50Hz reduced blanking 1360x768 60Hz -## 40 1080i 100Hz 1360x768 120Hz reduced blanking -## 41 720p 100Hz 1400x1050 reduced blanking -## 42 576p 100Hz 1400x1050 60Hz -## 43 576p 100Hz H 1400x1050 75Hz -## 44 576i 100Hz 1400x1050 85Hz -## 45 576i 100Hz H 1400x1050 120Hz reduced blanking -## 46 1080i 120Hz 1440x900 reduced blanking -## 47 720p 120Hz 1440x900 60Hz -## 48 480p 120Hz 1440x900 75Hz -## 49 480p 120Hz H 1440x900 85Hz -## 50 480i 120Hz 1440x900 120Hz reduced blanking -## 51 480i 120Hz H 1600x1200 60Hz -## 52 576p 200Hz 1600x1200 65Hz -## 53 576p 200Hz H 1600x1200 70Hz -## 54 576i 200Hz 1600x1200 75Hz -## 55 576i 200Hz H 1600x1200 85Hz -## 56 480p 240Hz 1600x1200 120Hz reduced blanking -## 57 480p 240Hz H 1680x1050 reduced blanking -## 58 480i 240Hz 1680x1050 60Hz -## 59 480i 240Hz H 1680x1050 75Hz -## 60 1680x1050 85Hz -## 61 1680x1050 120Hz reduced blanking -## 62 1792x1344 60Hz -## 63 1792x1344 75Hz -## 64 1792x1344 120Hz reduced blanking -## 65 1856x1392 60Hz -## 66 1856x1392 75Hz -## 67 1856x1392 120Hz reduced blanking -## 68 1920x1200 reduced blanking -## 69 1920x1200 60Hz -## 70 1920x1200 75Hz -## 71 1920x1200 85Hz -## 72 1920x1200 120Hz reduced blanking -## 73 1920x1440 60Hz -## 74 1920x1440 75Hz -## 75 1920x1440 120Hz reduced blanking -## 76 2560x1600 reduced blanking -## 77 2560x1600 60Hz -## 78 2560x1600 75Hz -## 79 2560x1600 85Hz -## 80 2560x1600 120Hz reduced blanking -## 81 1366x768 60Hz -## 82 1080p 60Hz -## 83 1600x900 reduced blanking -## 84 2048x1152 reduced blanking -## 85 720p 60Hz -## 86 1366x768 reduced blanking -## -#hdmi_mode=1 - -## config_hdmi_boost -## configure the signal strength of the HDMI interface. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 (Default) -## 1 -## 2 -## 3 -## 4 Try if you have interference issues with HDMI -## 5 -## 6 -## 7 Maximum -## -#config_hdmi_boost=0 - -## hdmi_ignore_cec_init -## Doesn't sent initial active source message. Avoids bringing -## (CEC enabled) TV out of standby and channel switch when rebooting. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Normal behaviour (Default) -## 1 Doesn't sent initial active source message -## -#hdmi_ignore_cec_init=1 - -## hdmi_ignore_cec -## Pretends CEC is not supported at all by TV. -## No CEC functions will be supported. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Normal behaviour (Default) -## 1 Pretend CEC is not supported by TV -## -#hdmi_ignore_cec=1 - -################################################################################ -## Overscan Video Settings -################################################################################ - -## overscan_left -## Number of pixels to skip on left -## -#overscan_left=0 - -## overscan_right -## Number of pixels to skip on right -## -#overscan_right=0 - -## overscan_top -## Number of pixels to skip on top -## -#overscan_top=0 - -## overscan_bottom -## Number of pixels to skip on bottom -## -#overscan_bottom=0 - -## disable_overscan -## Set to 1 to disable overscan -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Overscan Enabled (Default) -## 1 Overscan Disabled -## +# uncomment this if your display has a black border of unused pixels visible +# and your display can output without overscan #disable_overscan=1 -################################################################################ -## Framebuffer Video Settings -################################################################################ +# uncomment the following to adjust overscan. Use positive numbers if console +# goes off screen, and negative if there is too much border +#overscan_left=16 +#overscan_right=16 +#overscan_top=16 +#overscan_bottom=16 -## framebuffer_width -## Console framebuffer width in pixels. Default is display width minus -## overscan. -## -#framebuffer_width=0 +# uncomment to force a console size. By default it will be display's size minus +# overscan. +#framebuffer_width=1280 +#framebuffer_height=720 -## framebuffer_height -## Console framebuffer height in pixels. Default is display height minus -## overscan. -## -#framebuffer_height=0 +# uncomment if hdmi display is not detected and composite is being output +#hdmi_force_hotplug=1 -## framebuffer_depth -## Console framebuffer depth in bits per pixel. -## -## Value Description -## ------------------------------------------------------------------------- -## 8 Valid, but default RGB palette makes an unreadable screen -## 16 (Default) -## 24 Looks better but has corruption issues as of 2012/06/15 -## 32 Has no corruption issues but needs framebuffer_ignore_alpha=1 -## and shows the wrong colors as of 2012/06/15 -## -#framebuffer_depth=16 +# uncomment to force a specific HDMI mode (this will force VGA) +#hdmi_group=1 +#hdmi_mode=1 -## framebuffer_ignore_alpha -## Set to 1 to disable alpha channel. Helps with 32bit. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Enable Alpha Channel (Default) -## 1 Disable Alpha Channel -## -#framebuffer_ignore_alpha=0 +# uncomment to force a HDMI mode rather than DVI. This can make audio work in +# DMT (computer monitor) modes +#hdmi_drive=2 -################################################################################ -## General Video Settings -################################################################################ +# uncomment to increase signal to HDMI, if you have interference, blanking, or +# no display +#config_hdmi_boost=4 -## display_rotate -## Rotate the display clockwise or flip the display. -## The 90 and 270 degrees rotation options require additional memory on GPU, -## so won't work with the 16M GPU split. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 0 degrees (Default) -## 1 90 degrees -## 2 180 degrees -## 3 270 degrees -## 0x10000 Horizontal flip -## 0x20000 Vertical flip -## -#display_rotate=0 +# uncomment for composite PAL +#sdtv_mode=2 -## dispmanx_offline -## Set to "1" to enable offline compositing -## -## Default 0 -## -#dispmanx_offline=0 +#uncomment to overclock the arm. 700 MHz is the default. +#arm_freq=800 -################################################################################ -## Licensed Codecs -## -## Hardware decoding of additional codecs can be enabled by purchasing a -## license that is locked to the CPU serial number of your Raspberry Pi. -## -## Up to 8 licenses per CODEC can be specified as a comma seperated list. -## -################################################################################ +# Uncomment some or all of these to enable the optional hardware interfaces +#dtparam=i2c_arm=on +#dtparam=i2s=on +#dtparam=spi=on -## decode_MPG2 -## License key to allow hardware MPEG-2 decoding. -## -#decode_MPG2=0x12345678 +# Uncomment this to enable the lirc-rpi module +#dtoverlay=lirc-rpi -## decode_WVC1 -## License key to allow hardware VC-1 decoding. -## -#decode_WVC1=0x12345678 +# Additional overlays and parameters are documented /boot/overlays/README -################################################################################ -## Camera Settings -################################################################################ - -## start_x -## Set to "1" to enable the camera module. -## -## Enabling the camera requires gpu_mem option to be specified with a value -## of at least 128. -## -## Default 0 -## -#start_x=0 - -## disable_camera_led -## Turn off the red camera led when recording video or taking a still -## picture. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 LED enabled (Default) -## 1 LED disabled -## -#disable_camera_led=1 - -################################################################################ -## Test Settings -################################################################################ - -## test_mode -## Enable test sound/image during boot for manufacturing test. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disable Test Mod (Default) -## 1 Enable Test Mode -## -#test_mode=0 - -################################################################################ -## Memory Settings -################################################################################ - -## disable_l2cache -## Disable arm access to GPU's L2 cache. Needs corresponding L2 disabled -## kernel. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Enable L2 Cache (Default) -## 1 Disable L2 cache -## -#disable_l2cache=0 - -## gpu_mem -## GPU memory allocation in MB for all board revisions. -## -## Default 64 -## -#gpu_mem=128 - -## gpu_mem_256 -## GPU memory allocation in MB for 256MB board revision. -## This option overrides gpu_mem. -## -#gpu_mem_256=192 - -## gpu_mem_512 -## GPU memory allocation in MB for 512MB board revision. -## This option overrides gpu_mem. -## -#gpu_mem_512=448 - -## gpu_mem_1024 -## GPU memory allocation in MB for 1024MB board revision. -## This option overrides gpu_mem. -## -#gpu_mem_1024=944 - -## disable_pvt -## Disable adjusting the refresh rate of RAM every 500ms -## (measuring RAM temparature). -## -#disable_pvt=1 - -################################################################################ -## CMA - Dynamic Memory Split -## -## CMA enables dynamic management of the ARM and GPU memory split at runtime. -## -## The following options need to be in cmdline.txt for CMA to work: -## coherent_pool=6M smsc95xx.turbo_mode=N -## -################################################################################ - -## cma_lwm -## When GPU has less than cma_lwm (low water mark) memory available it -## will request some from ARM. -## -#cma_lwm=16 - -## cma_hwm -## When GPU has more than cma_hwm (high water mark) memory available it -## will release some to ARM. -## -#cma_hwm=32 - -################################################################################ -## Boot Option Settings -################################################################################ - -## init_uart_baud -## Initial uart baud rate. -## -## Default 115200 -## -#init_uart_baud=115200 - -## init_uart_clock -## Initial uart clock. -## -## Default 3000000 (3MHz) -## -#init_uart_clock=3000000 - -## init_emmc_clock -## Initial emmc clock, increasing this can speedup your SD-card. -## -## Default 100000000 (100mhz) -## -#init_emmc_clock=100000000 - -## boot_delay -## Wait for a given number of seconds in start.elf before loading -## kernel.img. -## -## delay = (1000 * boot_delay) + boot_delay_ms -## -## Default 1 -## -#boot_delay=0 - -## boot_delay_ms -## Wait for a given number of milliseconds in start.elf before loading -## kernel.img. -## -## delay = (1000 * boot_delay) + boot_delay_ms -## -## Default 0 -## -#boot_delay_ms=0 - -## avoid_safe_mode -## Adding a jumper between pins 5 & 6 of P1 enables a recovery Safe Mode. -## If pins 5 & 6 are used for connecting to external devices (e.g. GPIO), -## then this setting can be used to ensure Safe Mode is not triggered. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Respect Safe Mode input (Default) -## 1 Ignore Safe Mode input -## -#avoid_safe_mode=1 - -## disable_splash -## Avoids the rainbow splash screen on boot. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Splash screen enabled (Default) -## 1 Splash screen disabled -## -disable_splash=1 - -################################################################################ -## Overclocking Settings -## -## ARM, SDRAM and GPU each have their own PLLs and can have unrelated -## frequencies. -## -## The GPU core, h264, v3d and isp share a PLL, so need to have related -## frequencies. -## pll_freq = floor(2400 / (2 * core_freq)) * (2 * core_freq) -## gpu_freq = pll_freq / [even number] -## -## The effective gpu_freq is automatically rounded to nearest even integer, so -## asking for core_freq = 500 and gpu_freq = 300 will result in divisor of -## 2000/300 = 6.666 => 6 and so 333.33MHz. -## -## -## Standard Profiles: -## arm_freq core_freq sdram_freq over_voltage -## ------------------------------------------------------------------------- -## None 700 250 400 0 -## Modest 800 300 400 0 -## Medium 900 333 450 2 -## High 950 450 450 6 -## Turbo 1000 500 500 6 -## -################################################################################ - -## force_turbo -## Control the kernel "ondemand" governor. It has no effect if no overclock -## settings are specified. -## May set warrany bit. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Enable dynamic clocks and voltage for the ARM core, GPU core and -## SDRAM (Default). -## Overclocking of h264_freq, v3d_freq and isp_freq is ignored. -## 1 Disable dynamic clocks and voltage for the ARM core, GPU core -## and SDRAM. -## Overclocking of h264_freq, v3d_freq and isp_freq is allowed. -## -#force_turbo=0 - -## initial_turbo -## Enables turbo mode from boot for the given value in seconds (up to 60) -## or until cpufreq sets a frequency. Can help with sdcard corruption if -## overclocked. -## -## Default 0 -## -#initial_turbo=0 - -## temp_limit -## Overheat protection. Sets clocks and voltages to default when the SoC -## reaches this Celsius value. -## Setting this higher than default voids warranty. -## -## Default 85 -## -#temp_limit=85 - -## arm_freq -## Frequency of ARM in MHz. -## -## Default 700. -## -#arm_freq=700 - -## arm_freq_min -## Minimum frequency of ARM in MHz (used for dynamic clocking). -## -## Default 700. -## -#arm_freq_min=700 - -## gpu_freq -## Sets core_freq, h264_freq, isp_freq, v3d_freq together. -## -## Default 250. -## -#gpu_freq=250 - -## core_freq -## Frequency of GPU processor core in MHz. It has an impact on ARM -## performance since it drives L2 cache. -## -## Default 250. -## -#core_freq=250 - -## core_freq_min -## Minimum frequency of GPU processor core in MHz (used for dynamic -## clocking). It has an impact on ARM performance since it drives L2 cache. -## -## Default 250. -## -#core_freq_min=250 - -## h264_freq -## Frequency of hardware video block in MHz. -## -## Default 250. -## -#h264_freq=250 - -## isp_freq -## Frequency of image sensor pipeline block in MHz. -## -## Default 250. -## -#isp_freq=250 - -## v3d_freq -## Frequency of 3D block in MHz. -## -## Default 250. -## -#v3d_freq=250 - -## sdram_freq -## Frequency of SDRAM in MHz. -## -## Default 400. -## -#sdram_freq=400 - -## sdram_freq_min -## Minimum frequency of SDRAM in MHz (used for dynamic clocking). -## -## Default 400. -## -#sdram_freq_min=400 - -## avoid_pwm_pll -## Don't dedicate a pll to PWM audio. This will reduce analogue audio -## quality slightly. The spare PLL allows the core_freq to be set -## independently from the rest of the gpu allowing more control over -## overclocking. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Linked core_freq (Default) -## 1 Unlinked core_freq -## -#avoid_pwm_pll=1 - -################################################################################ -## Voltage Settings -################################################################################ - -## current_limit_override -## Disables SMPS current limit protection. Can help if you are currently -## hitting a reboot failure when overclocking too high. -## May set warrany bit. -## -#current_limit_override=0x5A000020 - -## over_voltage -## ARM/GPU core voltage adjust. -## May set warrany bit. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V (requires force_turbo=1 or current_limit_override) -## 8 1.4 V (requires force_turbo=1 or current_limit_override) -## -#over_voltage=0 - -## over_voltage_min -## Minimum ARM/GPU core voltage adjust (used for dynamic clocking). -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V (requires force_turbo=1) -## 8 1.4 V (requires force_turbo=1) -## -#over_voltage_min=0 - -## over_voltage_sdram -## Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p -## together -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram=0 - -## over_voltage_sdram_c -## SDRAM controller voltage adjust. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram_c=0 - -## over_voltage_sdram_i -## SDRAM I/O voltage adjust. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram_i=0 - -## over_voltage_sdram_p -## SDRAM phy voltage adjust. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram_p=0 - -################################################################################ -## USB Power -################################################################################ - -## max_usb_current -## When set to 1, change the output current limit (for all 4 USB -## ports combined) from 600mA to double that, 1200mA. -## -## This option is not available for Model A/B boards. -## -## Default 0. -## -#max_usb_current=0 - -################################################################################ -## Base Device Tree Parameters -################################################################################ - -## audio -## Enable the onboard ALSA audio -## -## Default off. -## +# Enable audio (loads snd_bcm2835) dtparam=audio=on -## i2c_arm -## Enable the ARM's i2c interface -## -## Default off. -## -dtparam=i2c_arm=on - -## i2c_vc -## Enable the i2c interface -## -## Usually reserved for the VideoCore processor -## -## Default off. -## -#dtparam=i2c_vc=off - -## i2c_arm_baudrate -## Set the baudrate of the ARM's i2c interface -## -## Default 100000. -## -#dtparam=i2c_arm_baudrate=100000 - -## i2c_vc_baudrate -## Set the baudrate of the VideoCore i2c interface -## -## Default 100000. -## -#dtparam=i2c_vc_baudrate=100000 - -## i2s -## Set to "on" to enable the i2s interface -## -## Default off. -## -#dtparam=i2s=off - -## spi -## Set to "on" to enable the spi interfaces -## -## Default off. -## -dtparam=spi=on - -## random -## Set to "on" to enable the hardware random -## -## Default off. -## -#dtparam=random=off - -## uart0 -## Set to "off" to disable uart0 -## -## Default on. -## -#dtparam=uart0=on - -## watchdog -## Set to "on" to enable the hardware watchdog -## -## Default off. -## -#dtparam=watchdog=off - -## act_led_trigger -## Choose which activity the LED tracks. -## -## Use "heartbeat" for a nice load indicator. -## -## Default mmc. -## -#dtparam=act_led_trigger=mmc - -## act_led_activelow -## Set to "on" to invert the sense of the LED -## -## Default off. -## -#dtparam=act_led_activelow=off - -## act_led_gpio -## Set which GPIO to use for the activity LED -## -## In case you want to connect it to an external device -## -## Default 16 on a non-Plus board, 47 on a Plus or Pi 2. -## -#dtparam=act_led_gpio=47 - -## pwr_led_trigger -## Choose which activity the LED tracks. -## -## Use "heartbeat" for a nice load indicator. -## -## Not available on Model A/B boards. -## -## Default mmc. -## -#dtparam=pwr_led_trigger=mmc - -## pwr_led_activelow -## Set to "on" to invert the sense of the LED -## -## Not available on Model A/B boards. -## -## Default off. -## -#dtparam=pwr_led_activelow=off - -## pwr_led_gpio -## Set which GPIO to use for the PWR LED -## -## In case you want to connect it to an external device -## -## Not available on Model A/B boards. -## -## Default 35. -## -#dtparam=pwr_led_gpio=35 +[all] +#dtoverlay=vc4-fkms-v3d +#max_framebuffers=2 diff --git a/buildroot-external/board/raspberrypi/hassos-hook.sh b/buildroot-external/board/raspberrypi/hassos-hook.sh index f9ca9df73..e591cda90 100755 --- a/buildroot-external/board/raspberrypi/hassos-hook.sh +++ b/buildroot-external/board/raspberrypi/hassos-hook.sh @@ -28,7 +28,7 @@ function hassos_pre_image() { # Enable 64bit support if [[ "${BOARD_ID}" =~ "64" ]]; then - echo "arm_64bit=1" >> "${BOOT_DATA}/config.txt" + sed -i "s|#arm_64bit|arm_64bit|g" "${BOOT_DATA}/config.txt" fi } diff --git a/buildroot-external/board/raspberrypi/kernel.config b/buildroot-external/board/raspberrypi/kernel.config deleted file mode 100644 index 37e0f19f0..000000000 --- a/buildroot-external/board/raspberrypi/kernel.config +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -CONFIG_FB_SIMPLE=y -# CONFIG_FB_BCM2708 is not set \ No newline at end of file diff --git a/buildroot-external/board/raspberrypi/patches/uboot/0001-raspberrypi-Disable-simple-framebuffer-support.patch b/buildroot-external/board/raspberrypi/patches/uboot/0001-raspberrypi-Disable-simple-framebuffer-support.patch new file mode 100644 index 000000000..d7a02e335 --- /dev/null +++ b/buildroot-external/board/raspberrypi/patches/uboot/0001-raspberrypi-Disable-simple-framebuffer-support.patch @@ -0,0 +1,62 @@ +From 68e65b1e3859d4baf41d1e5f6525ff7ace778ba1 Mon Sep 17 00:00:00 2001 +From: Florin Sarbu +Date: Thu, 12 Sep 2019 12:31:31 +0200 +Subject: [PATCH] raspberrypi: Disable simple framebuffer support + +On 4.19 kernels this u-boot driver clashes with bcm2708_fb. +So let's disable it from here so that we have bcm2708_fb +enabled in the kernel, just as Raspbian users might expect. +See https://github.com/raspberrypi/linux/issues/3139 + +Upstream-Status: Inappropriate [configuration] +Signed-off-by: Florin Sarbu +--- + board/raspberrypi/rpi/rpi.c | 2 +- + common/Makefile | 2 +- + include/configs/rpi.h | 4 ++-- + 3 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c +index 153a1fd..c7bd399 100644 +--- a/board/raspberrypi/rpi/rpi.c ++++ b/board/raspberrypi/rpi/rpi.c +@@ -482,7 +482,7 @@ int ft_board_setup(void *blob, bd_t *bd) + * should be more intelligent, and e.g. only do this if no enabled DT + * node exists for the "real" graphics driver. + */ +- lcd_dt_simplefb_add_node(blob); ++ //lcd_dt_simplefb_add_node(blob); + + #ifdef CONFIG_EFI_LOADER + /* Reserve the spin table */ +diff --git a/common/Makefile b/common/Makefile +index 0de60b3..2848d98 100644 +--- a/common/Makefile ++++ b/common/Makefile +@@ -50,7 +50,7 @@ ifndef CONFIG_DM_VIDEO + obj-$(CONFIG_LCD) += lcd.o lcd_console.o + endif + obj-$(CONFIG_LCD_ROTATION) += lcd_console_rotation.o +-obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o ++//obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o + obj-$(CONFIG_LYNXKDI) += lynxkdi.o + obj-$(CONFIG_MENU) += menu.o + obj-$(CONFIG_UPDATE_TFTP) += update.o +diff --git a/include/configs/rpi.h b/include/configs/rpi.h +index a38bf20..e2760b0 100644 +--- a/include/configs/rpi.h ++++ b/include/configs/rpi.h +@@ -60,8 +60,8 @@ + /* GPIO */ + #define CONFIG_BCM2835_GPIO + /* LCD */ +-#define CONFIG_LCD_DT_SIMPLEFB +-#define CONFIG_VIDEO_BCM2835 ++//#define CONFIG_LCD_DT_SIMPLEFB ++//#define CONFIG_VIDEO_BCM2835 + + #ifdef CONFIG_CMD_USB + #define CONFIG_TFTP_TSIZE +-- +2.7.4 + diff --git a/buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch b/buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch new file mode 100644 index 000000000..5bd08f82a --- /dev/null +++ b/buildroot-external/board/raspberrypi/patches/uboot/0001-rpi-Use-CONFIG_OF_BOARD-instead-of-CONFIG_EMBED.patch @@ -0,0 +1,82 @@ +From 0f45c3f2f46b62f767ef225b258f927ad88ca360 Mon Sep 17 00:00:00 2001 +From: Pascal Vizeli +Date: Tue, 10 Dec 2019 09:48:46 +0000 +Subject: [PATCH 1/1] rpi: Use CONFIG_OF_BOARD instead of CONFIG_EMBED + +Signed-off-by: Pascal Vizeli +--- + configs/rpi_0_w_defconfig | 2 +- + configs/rpi_2_defconfig | 2 +- + configs/rpi_3_32b_defconfig | 2 +- + configs/rpi_3_defconfig | 2 +- + configs/rpi_defconfig | 2 +- + 5 files changed, 5 insertions(+), 5 deletions(-) + +diff --git a/configs/rpi_0_w_defconfig b/configs/rpi_0_w_defconfig +index fe5a7763a6..ed7f9381e9 100644 +--- a/configs/rpi_0_w_defconfig ++++ b/configs/rpi_0_w_defconfig +@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-zero-w" + CONFIG_ENV_FAT_INTERFACE="mmc" + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig +index bf331c0ad0..52e3c3b234 100644 +--- a/configs/rpi_2_defconfig ++++ b/configs/rpi_2_defconfig +@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b" + CONFIG_ENV_FAT_INTERFACE="mmc" + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +diff --git a/configs/rpi_3_32b_defconfig b/configs/rpi_3_32b_defconfig +index c2417a0ec9..191962f0f7 100644 +--- a/configs/rpi_3_32b_defconfig ++++ b/configs/rpi_3_32b_defconfig +@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b" + CONFIG_ENV_FAT_INTERFACE="mmc" + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +diff --git a/configs/rpi_3_defconfig b/configs/rpi_3_defconfig +index 4fa682539c..03a2356d3d 100644 +--- a/configs/rpi_3_defconfig ++++ b/configs/rpi_3_defconfig +@@ -18,7 +18,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b" + CONFIG_ENV_FAT_INTERFACE="mmc" + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig +index 2c04b3334e..bf00d8b669 100644 +--- a/configs/rpi_defconfig ++++ b/configs/rpi_defconfig +@@ -17,7 +17,7 @@ CONFIG_CMD_GPIO=y + CONFIG_CMD_MMC=y + CONFIG_CMD_USB=y + CONFIG_CMD_FS_UUID=y +-CONFIG_OF_EMBED=y ++CONFIG_OF_BOARD=y + CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b" + CONFIG_ENV_FAT_INTERFACE="mmc" + CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" +-- +2.17.1 + diff --git a/buildroot-external/board/raspberrypi/rootfs-overlay/usr/lib/udev/rules.d/99-rpi.rules b/buildroot-external/board/raspberrypi/rootfs-overlay/usr/lib/udev/rules.d/99-rpi.rules new file mode 100644 index 000000000..6bf019bd1 --- /dev/null +++ b/buildroot-external/board/raspberrypi/rootfs-overlay/usr/lib/udev/rules.d/99-rpi.rules @@ -0,0 +1,21 @@ +KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \ + echo 0;\ + elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi\ +'", SYMLINK+="serial%c" + +KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\ + ALIASES=/proc/device-tree/aliases; \ + if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \ + echo 0; \ + elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \ + echo 1; \ + else \ + exit 1; \ + fi \ +'", SYMLINK+="serial%c" diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0001-configs-rpi4-Add-defconfig-for-rpi4-64.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0001-configs-rpi4-Add-defconfig-for-rpi4-64.patch deleted file mode 100644 index f9ef6ca53..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0001-configs-rpi4-Add-defconfig-for-rpi4-64.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 9f471bee7e230bc9b99155506388fb98903bd3c3 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sat, 6 Jul 2019 23:49:47 +0100 -Subject: [PATCH 01/17] configs: rpi4: Add defconfig for rpi4-64 - -This config is based on the the rpi3 counterpart. - -Signed-off-by: Andrei Gherzan ---- - configs/rpi_4_defconfig | 43 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 43 insertions(+) - create mode 100644 configs/rpi_4_defconfig - -diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig -new file mode 100644 -index 0000000000..83d1bd0cdb ---- /dev/null -+++ b/configs/rpi_4_defconfig -@@ -0,0 +1,43 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_BCM283X=y -+CONFIG_SYS_TEXT_BASE=0x00080000 -+CONFIG_TARGET_RPI_4=y -+CONFIG_SYS_MALLOC_F_LEN=0x2000 -+CONFIG_DISTRO_DEFAULTS=y -+CONFIG_NR_DRAM_BANKS=1 -+CONFIG_OF_BOARD_SETUP=y -+CONFIG_MISC_INIT_R=y -+# CONFIG_DISPLAY_CPUINFO is not set -+# CONFIG_DISPLAY_BOARDINFO is not set -+CONFIG_SYS_PROMPT="U-Boot> " -+# CONFIG_CMD_FLASH is not set -+CONFIG_CMD_GPIO=y -+CONFIG_CMD_MMC=y -+CONFIG_CMD_USB=y -+CONFIG_CMD_FS_UUID=y -+CONFIG_OF_EMBED=y -+CONFIG_DEFAULT_DEVICE_TREE="bcm2838-rpi-4-b" -+CONFIG_ENV_FAT_INTERFACE="mmc" -+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" -+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -+CONFIG_DM_KEYBOARD=y -+CONFIG_DM_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_BCM2835=y -+CONFIG_PHYLIB=y -+CONFIG_DM_ETH=y -+CONFIG_PINCTRL=y -+# CONFIG_PINCTRL_GENERIC is not set -+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set -+CONFIG_USB=y -+CONFIG_DM_USB=y -+CONFIG_USB_DWC2=y -+CONFIG_USB_KEYBOARD=y -+CONFIG_USB_HOST_ETHER=y -+CONFIG_USB_ETHER_LAN78XX=y -+CONFIG_USB_ETHER_SMSC95XX=y -+CONFIG_DM_VIDEO=y -+CONFIG_SYS_WHITE_ON_BLACK=y -+CONFIG_CONSOLE_SCROLL_LINES=10 -+CONFIG_PHYS_TO_BUS=y -+CONFIG_OF_LIBFDT_OVERLAY=y --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0002-dts-Create-a-dtsi-for-BCM2835-6-7-specific-configura.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0002-dts-Create-a-dtsi-for-BCM2835-6-7-specific-configura.patch deleted file mode 100644 index 17b09c752..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0002-dts-Create-a-dtsi-for-BCM2835-6-7-specific-configura.patch +++ /dev/null @@ -1,208 +0,0 @@ -From 24f5e0b88b88f2e47e420e6f2f123b8726c9f396 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sat, 6 Jul 2019 23:58:44 +0100 -Subject: [PATCH 02/17] dts: Create a dtsi for BCM2835/6/7 specific - configuration - -This follows a similar change in kernel[1]. The change moves -configuration that was not applicable for all bcm2835/6/7/8 out of -bcm283x.dtsi. The new file is bcm2835-common.dtsi and contains -conifguration that is common for bcm2835/6/7 (not bcm2838). - -[1] https://github.com/raspberrypi/linux/commit/769a7330aa5bebcc98b1ff12ecb767db4e5c644d#diff-5979fba23a5bab2cf66dde09db872dfc - -Signed-off-by: Andrei Gherzan ---- - arch/arm/dts/bcm2835-common.dtsi | 53 ++++++++++++++++++++++++++++++++ - arch/arm/dts/bcm2835.dtsi | 1 + - arch/arm/dts/bcm2836.dtsi | 1 + - arch/arm/dts/bcm2837.dtsi | 1 + - arch/arm/dts/bcm283x.dtsi | 45 +-------------------------- - 5 files changed, 57 insertions(+), 44 deletions(-) - create mode 100644 arch/arm/dts/bcm2835-common.dtsi - -diff --git a/arch/arm/dts/bcm2835-common.dtsi b/arch/arm/dts/bcm2835-common.dtsi -new file mode 100644 -index 0000000000..17771730a3 ---- /dev/null -+++ b/arch/arm/dts/bcm2835-common.dtsi -@@ -0,0 +1,53 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/* This include file covers the common peripherals and configuration between -+ * bcm2835, bcm2836 and bcm2837 implementations. -+ */ -+ -+/ { -+ soc { -+ timer@7e003000 { -+ compatible = "brcm,bcm2835-system-timer"; -+ reg = <0x7e003000 0x1000>; -+ interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -+ /* This could be a reference to BCM2835_CLOCK_TIMER, -+ * but we don't have the driver using the common clock -+ * support yet. -+ */ -+ clock-frequency = <1000000>; -+ }; -+ -+ intc: interrupt-controller@7e00b200 { -+ compatible = "brcm,bcm2835-armctrl-ic"; -+ reg = <0x7e00b200 0x200>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ }; -+ -+ thermal: thermal@7e212000 { -+ compatible = "brcm,bcm2835-thermal"; -+ reg = <0x7e212000 0x8>; -+ clocks = <&clocks BCM2835_CLOCK_TSENS>; -+ #thermal-sensor-cells = <0>; -+ status = "disabled"; -+ }; -+ -+ v3d: v3d@7ec00000 { -+ compatible = "brcm,bcm2835-v3d"; -+ reg = <0x7ec00000 0x1000>; -+ interrupts = <1 10>; -+ }; -+ }; -+}; -+ -+&gpio { -+ i2c_slave_gpio18: i2c_slave_gpio18 { -+ brcm,pins = <18 19 20 21>; -+ brcm,function = ; -+ }; -+ -+ jtag_gpio4: jtag_gpio4 { -+ brcm,pins = <4 5 6 12 13>; -+ brcm,function = ; -+ }; -+}; -diff --git a/arch/arm/dts/bcm2835.dtsi b/arch/arm/dts/bcm2835.dtsi -index a5c3824c80..53bf4579cc 100644 ---- a/arch/arm/dts/bcm2835.dtsi -+++ b/arch/arm/dts/bcm2835.dtsi -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2835"; -diff --git a/arch/arm/dts/bcm2836.dtsi b/arch/arm/dts/bcm2836.dtsi -index c933e84138..82d6c4662a 100644 ---- a/arch/arm/dts/bcm2836.dtsi -+++ b/arch/arm/dts/bcm2836.dtsi -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0 - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2836"; -diff --git a/arch/arm/dts/bcm2837.dtsi b/arch/arm/dts/bcm2837.dtsi -index beb6c502da..9e95fee78e 100644 ---- a/arch/arm/dts/bcm2837.dtsi -+++ b/arch/arm/dts/bcm2837.dtsi -@@ -1,4 +1,5 @@ - #include "bcm283x.dtsi" -+#include "bcm2835-common.dtsi" - - / { - compatible = "brcm,bcm2837"; -diff --git a/arch/arm/dts/bcm283x.dtsi b/arch/arm/dts/bcm283x.dtsi -index 9777644c6c..a024727e4d 100644 ---- a/arch/arm/dts/bcm283x.dtsi -+++ b/arch/arm/dts/bcm283x.dtsi -@@ -56,17 +56,6 @@ - #address-cells = <1>; - #size-cells = <1>; - -- timer@7e003000 { -- compatible = "brcm,bcm2835-system-timer"; -- reg = <0x7e003000 0x1000>; -- interrupts = <1 0>, <1 1>, <1 2>, <1 3>; -- /* This could be a reference to BCM2835_CLOCK_TIMER, -- * but we don't have the driver using the common clock -- * support yet. -- */ -- clock-frequency = <1000000>; -- }; -- - txp@7e004000 { - compatible = "brcm,bcm2835-txp"; - reg = <0x7e004000 0x20>; -@@ -114,13 +103,6 @@ - brcm,dma-channel-mask = <0x7f35>; - }; - -- intc: interrupt-controller@7e00b200 { -- compatible = "brcm,bcm2835-armctrl-ic"; -- reg = <0x7e00b200 0x200>; -- interrupt-controller; -- #interrupt-cells = <2>; -- }; -- - pm: watchdog@7e100000 { - compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; - #power-domain-cells = <1>; -@@ -184,8 +166,7 @@ - interrupt-controller; - #interrupt-cells = <2>; - -- /* Defines pin muxing groups according to -- * BCM2835-ARM-Peripherals.pdf page 102. -+ /* Defines common pin muxing groups - * - * While each pin can have its mux selected - * for various functions individually, some -@@ -263,15 +244,6 @@ - brcm,pins = <44 45>; - brcm,function = ; - }; -- i2c_slave_gpio18: i2c_slave_gpio18 { -- brcm,pins = <18 19 20 21>; -- brcm,function = ; -- }; -- -- jtag_gpio4: jtag_gpio4 { -- brcm,pins = <4 5 6 12 13>; -- brcm,function = ; -- }; - jtag_gpio22: jtag_gpio22 { - brcm,pins = <22 23 24 25 26 27>; - brcm,function = ; -@@ -488,14 +460,6 @@ - - }; - -- thermal: thermal@7e212000 { -- compatible = "brcm,bcm2835-thermal"; -- reg = <0x7e212000 0x8>; -- clocks = <&clocks BCM2835_CLOCK_TSENS>; -- #thermal-sensor-cells = <0>; -- status = "disabled"; -- }; -- - aux: aux@7e215000 { - compatible = "brcm,bcm2835-aux"; - #clock-cells = <1>; -@@ -635,13 +599,6 @@ - phy-names = "usb2-phy"; - }; - -- v3d: v3d@7ec00000 { -- compatible = "brcm,bcm2835-v3d"; -- reg = <0x7ec00000 0x1000>; -- interrupts = <1 10>; -- power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; -- }; -- - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0003-dts-Add-initial-support-for-bcm2838.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0003-dts-Add-initial-support-for-bcm2838.patch deleted file mode 100644 index 6a8339a8b..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0003-dts-Add-initial-support-for-bcm2838.patch +++ /dev/null @@ -1,337 +0,0 @@ -From d7532dbcde253d824d4fe3d1f1f40e92e62ad291 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sun, 7 Jul 2019 00:12:36 +0100 -Subject: [PATCH 03/17] dts: Add initial support for bcm2838 - -Signed-off-by: Andrei Gherzan ---- - arch/arm/dts/Makefile | 4 +- - arch/arm/dts/bcm2838-rpi-4-b.dts | 56 ++++++++ - arch/arm/dts/bcm2838.dtsi | 237 +++++++++++++++++++++++++++++++ - 3 files changed, 296 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/dts/bcm2838-rpi-4-b.dts - create mode 100644 arch/arm/dts/bcm2838.dtsi - -diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile -index 20dbc2ff84..16790af1e1 100644 ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -749,7 +749,9 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ - bcm2837-rpi-3-a-plus.dtb \ - bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb \ -- bcm2837-rpi-cm3-io3.dtb -+ bcm2837-rpi-cm3-io3.dtb \ -+ bcm2837-rpi-3-b.dtb \ -+ bcm2838-rpi-4-b.dtb - - dtb-$(CONFIG_ARCH_BCM63158) += \ - bcm963158.dtb -diff --git a/arch/arm/dts/bcm2838-rpi-4-b.dts b/arch/arm/dts/bcm2838-rpi-4-b.dts -new file mode 100644 -index 0000000000..07e9a78e8d ---- /dev/null -+++ b/arch/arm/dts/bcm2838-rpi-4-b.dts -@@ -0,0 +1,56 @@ -+/dts-v1/; -+#include "bcm2838.dtsi" -+ -+/ { -+ compatible = "raspberrypi,4-model-b","brcm,bcm2838","brcm,bcm2837"; -+ model = "Raspberry Pi 4 Model B"; -+ -+ memory { -+ reg = <0 0 0x40000000>; -+ }; -+ -+ leds { -+ act { -+ gpios = <&gpio 47 0>; -+ }; -+ }; -+}; -+ -+/* uart0 communicates with the BT module */ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; -+ status = "okay"; -+}; -+ -+/* uart1 is mapped to the pin header */ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+}; -+ -+/* SDHCI is used to control the SDIO for wireless */ -+&sdhci { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emmc_gpio34>; -+ status = "okay"; -+ bus-width = <4>; -+ non-removable; -+}; -+ -+/* SDHOST is used to drive the SD card */ -+&sdhost { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sdhost_gpio48>; -+ status = "okay"; -+ bus-width = <4>; -+}; -+ -+&gpio { -+ uart1_pins: uart1_pins { -+ brcm,pins; -+ brcm,function; -+ brcm,pull; -+ }; -+}; -diff --git a/arch/arm/dts/bcm2838.dtsi b/arch/arm/dts/bcm2838.dtsi -new file mode 100644 -index 0000000000..19b2d7b905 ---- /dev/null -+++ b/arch/arm/dts/bcm2838.dtsi -@@ -0,0 +1,237 @@ -+#include "bcm283x.dtsi" -+#include -+#include -+ -+/ { -+ compatible = "brcm,bcm2838"; -+ -+ #address-cells = <2>; -+ #size-cells = <1>; -+ -+ interrupt-parent = <&gic>; -+ -+ soc { -+ ranges = <0x7e000000 0x0 0xfe000000 0x01800000>, -+ <0x7c000000 0x0 0xfc000000 0x02000000>, -+ <0x40000000 0x0 0xff800000 0x00800000>; -+ dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>; -+ -+ gic: gic400@40041000 { -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ compatible = "arm,gic-400"; -+ reg = <0x40041000 0x1000>, -+ <0x40042000 0x2000>, -+ <0x40044000 0x2000>, -+ <0x40046000 0x2000>; -+ }; -+ -+ thermal: thermal@7d5d2200 { -+ compatible = "brcm,avs-tmon-bcm2838"; -+ reg = <0x7d5d2200 0x2c>; -+ interrupts = ; -+ interrupt-names = "tmon"; -+ clocks = <&clocks BCM2835_CLOCK_TSENS>; -+ #thermal-sensor-cells = <0>; -+ status = "okay"; -+ }; -+ -+ spi@7e204000 { -+ reg = <0x7e204000 0x0200>; -+ interrupts = ; -+ }; -+ -+ pixelvalve@7e206000 { -+ interrupts = ; -+ }; -+ -+ pixelvalve@7e207000 { -+ interrupts = ; -+ }; -+ -+ hvs@7e400000 { -+ interrupts = ; -+ }; -+ -+ emmc2: emmc2@7e340000 { -+ compatible = "brcm,bcm2711-emmc2"; -+ status = "okay"; -+ interrupts = ; -+ clocks = <&clocks BCM2838_CLOCK_EMMC2>; -+ reg = <0x7e340000 0x100>; -+ }; -+ -+ pixelvalve@7e807000 { -+ interrupts = ; -+ }; -+ -+ }; -+ -+ arm-pmu { -+ /* -+ * N.B. the A72 PMU support only exists in arch/arm64, hence -+ * the fallback to the A53 version. -+ */ -+ compatible = "arm,cortex-a72-pmu", "arm,cortex-a53-pmu"; -+ interrupts = , -+ , -+ , -+ ; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupts = , -+ , -+ , -+ ; -+ arm,cpu-registers-not-fw-configured; -+ always-on; -+ }; -+ -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <0>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000d8>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <1>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e0>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <2>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000e8>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a72"; -+ reg = <3>; -+ enable-method = "spin-table"; -+ cpu-release-addr = <0x0 0x000000f0>; -+ }; -+ }; -+}; -+ -+&clk_osc { -+ clock-frequency = <54000000>; -+}; -+ -+&clocks { -+ compatible = "brcm,bcm2838-cprman"; -+}; -+ -+&cpu_thermal { -+ coefficients = <(-487) 410040>; -+}; -+ -+&dsi0 { -+ interrupts = ; -+}; -+ -+&dsi1 { -+ interrupts = ; -+}; -+ -+&gpio { -+ compatible = "brcm,bcm2838-gpio", "brcm,bcm2835-gpio"; -+ interrupts = , -+ , -+ , -+ ; -+}; -+ -+&vec { -+ interrupts = ; -+}; -+ -+&usb { -+ interrupts = ; -+}; -+ -+&hdmi { -+ interrupts = , -+ ; -+}; -+ -+&uart1 { -+ interrupts = ; -+}; -+ -+&spi1 { -+ interrupts = ; -+}; -+ -+&spi2 { -+ interrupts = ; -+}; -+ -+&i2c0 { -+ interrupts = ; -+}; -+ -+&i2c1 { -+ interrupts = ; -+}; -+ -+&i2c2 { -+ interrupts = ; -+}; -+ -+&mailbox { -+ interrupts = ; -+}; -+ -+&sdhost { -+ interrupts = ; -+}; -+ -+&uart0 { -+ interrupts = ; -+}; -+ -+&dma { -+ reg = <0x7e007000 0xb00>; -+ interrupts = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , /* dmalite 7 */ -+ , /* dmalite 8 */ -+ , /* dmalite 9 */ -+ ; /* dmalite 10 */ -+ interrupt-names = "dma0", -+ "dma1", -+ "dma2", -+ "dma3", -+ "dma4", -+ "dma5", -+ "dma6", -+ "dma7", -+ "dma8", -+ "dma9", -+ "dma10"; -+ brcm,dma-channel-mask = <0x07f5>; -+}; --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0004-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0004-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch deleted file mode 100644 index 9f28a9dd3..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0004-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 865218f2dc973492c872dac51a66cff1833c916a Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sun, 7 Jul 2019 00:21:33 +0100 -Subject: [PATCH 04/17] arm: mach-bcm283x: Define configs for RaspberryPi 4 - -Signed-off-by: Andrei Gherzan ---- - arch/arm/mach-bcm283x/Kconfig | 35 +++++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - -diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig -index 3eb5a9a897..d5069fe688 100644 ---- a/arch/arm/mach-bcm283x/Kconfig -+++ b/arch/arm/mach-bcm283x/Kconfig -@@ -26,6 +26,23 @@ config BCM2837_64B - select BCM2837 - select ARM64 - -+config BCM2838 -+ bool "Broadcom BCM2838 SoC support" -+ depends on ARCH_BCM283X -+ -+config BCM2838_32B -+ bool "Broadcom BCM2838 SoC 32-bit support" -+ depends on ARCH_BCM283X -+ select BCM2838 -+ select ARMV7_LPAE -+ select CPU_V7A -+ -+config BCM2838_64B -+ bool "Broadcom BCM2838 SoC 64-bit support" -+ depends on ARCH_BCM283X -+ select BCM2838 -+ select ARM64 -+ - menu "Broadcom BCM283X family" - depends on ARCH_BCM283X - -@@ -127,6 +144,24 @@ config TARGET_RPI_3 - This option creates a build targeting the ARMv8/AArch64 ISA. - select BCM2837_64B - -+config TARGET_RPI_4 -+ bool "Raspberry Pi 4 64-bit build" -+ help -+ Support for all BCM2838-based Raspberry Pi variants, such as -+ the RPi 4 model B, in AArch64 (64-bit) mode. -+ -+ This option creates a build targeting the ARMv8/AArch64 ISA. -+ select BCM2838_64B -+ -+config TARGET_RPI_4_32B -+ bool "Raspberry Pi 4 32-bit build" -+ help -+ Support for all BCM2838-based Raspberry Pi variants, such as -+ the RPi 4 model B, in AArch32 (32-bit) mode. -+ -+ This option creates a build targeting the ARMv7/AArch32 ISA. -+ select BCM2838_32B -+ - endchoice - - config SYS_BOARD --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0005-arm-mach-bcm283x-Define-mbox-address-for-BCM2838.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0005-arm-mach-bcm283x-Define-mbox-address-for-BCM2838.patch deleted file mode 100644 index 9b221561c..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0005-arm-mach-bcm283x-Define-mbox-address-for-BCM2838.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 98ae56bf35b2102310d2e88f56639e9055aa10be Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sun, 7 Jul 2019 00:23:15 +0100 -Subject: [PATCH 05/17] arm: mach-bcm283x: Define mbox address for BCM2838 - -Signed-off-by: Andrei Gherzan ---- - arch/arm/mach-bcm283x/include/mach/mbox.h | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h -index e3a893e49c..2d711daaa8 100644 ---- a/arch/arm/mach-bcm283x/include/mach/mbox.h -+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h -@@ -38,11 +38,16 @@ - /* Raw mailbox HW */ - - #ifndef CONFIG_BCM2835 -+#ifdef CONFIG_BCM2838 -+#define BCM2835_MBOX_PHYSADDR 0xfe00b880 -+#else - #define BCM2835_MBOX_PHYSADDR 0x3f00b880 -+#endif - #else - #define BCM2835_MBOX_PHYSADDR 0x2000b880 - #endif - -+ - struct bcm2835_mbox_regs { - u32 read; - u32 rsvd0[5]; --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0006-rpi-Add-rpi_model-entry-for-RaspberryPi-4.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0006-rpi-Add-rpi_model-entry-for-RaspberryPi-4.patch deleted file mode 100644 index 6fd0c06e7..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0006-rpi-Add-rpi_model-entry-for-RaspberryPi-4.patch +++ /dev/null @@ -1,29 +0,0 @@ -From eef9e7760c367dd848ac90780ecce8dcd82d9bb4 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sun, 7 Jul 2019 00:25:58 +0100 -Subject: [PATCH 06/17] rpi: Add rpi_model entry for RaspberryPi 4 - -Signed-off-by: Andrei Gherzan ---- - board/raspberrypi/rpi/rpi.c | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c -index 617c892dde..6d6f1ef39a 100644 ---- a/board/raspberrypi/rpi/rpi.c -+++ b/board/raspberrypi/rpi/rpi.c -@@ -148,6 +148,11 @@ static const struct rpi_model rpi_models_new_scheme[] = { - DTB_DIR "bcm2837-rpi-cm3.dtb", - false, - }, -+ [0x11] = { -+ "4 Model B", -+ DTB_DIR "bcm2711-rpi-4-b.dtb", -+ true, -+ }, - }; - - static const struct rpi_model rpi_models_old_scheme[] = { --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0007-dt-bindings-Define-BCM2838_CLOCK_EMMC2-needed-for-Ra.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0007-dt-bindings-Define-BCM2838_CLOCK_EMMC2-needed-for-Ra.patch deleted file mode 100644 index 316da99bf..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0007-dt-bindings-Define-BCM2838_CLOCK_EMMC2-needed-for-Ra.patch +++ /dev/null @@ -1,27 +0,0 @@ -From fe0cff5d5f6e6fa56d83f04166d402ca13a0f23c Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Sun, 7 Jul 2019 00:31:27 +0100 -Subject: [PATCH 07/17] dt-bindings: Define BCM2838_CLOCK_EMMC2 needed for - RaspberryPi 4 - -On BCM2838 there is an additional clock. This clock was added in the -same bcm2835-cprman driver and is used by the emmc2 dt node. - -Signed-off-by: Andrei Gherzan ---- - include/dt-bindings/clock/bcm2835.h | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h -index 2cec01f968..457fd4e23c 100644 ---- a/include/dt-bindings/clock/bcm2835.h -+++ b/include/dt-bindings/clock/bcm2835.h -@@ -58,3 +58,5 @@ - #define BCM2835_CLOCK_DSI1E 48 - #define BCM2835_CLOCK_DSI0P 49 - #define BCM2835_CLOCK_DSI1P 50 -+ -+#define BCM2838_CLOCK_EMMC2 51 --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0008-arm-bcm283x-Include-definition-for-additional-emmc-c.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0008-arm-bcm283x-Include-definition-for-additional-emmc-c.patch deleted file mode 100644 index 3b0fc12a8..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0008-arm-bcm283x-Include-definition-for-additional-emmc-c.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 05c24bc9579b958f637ca1497387a6149581c644 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Fri, 12 Jul 2019 11:26:10 +0100 -Subject: [PATCH 08/17] arm: bcm283x: Include definition for additional emmc - clock - -This clock has a different mbox ID[1] so have this included in the -relevant header file. - -[1] https://github.com/raspberrypi/firmware/issues/1179 - -Signed-off-by: Andrei Gherzan ---- - arch/arm/mach-bcm283x/include/mach/mbox.h | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h -index 2d711daaa8..cad035e8cd 100644 ---- a/arch/arm/mach-bcm283x/include/mach/mbox.h -+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h -@@ -239,6 +239,7 @@ struct bcm2835_mbox_tag_set_power_state { - #define BCM2835_MBOX_CLOCK_ID_SDRAM 8 - #define BCM2835_MBOX_CLOCK_ID_PIXEL 9 - #define BCM2835_MBOX_CLOCK_ID_PWM 10 -+#define BCM2835_MBOX_CLOCK_ID_EMMC2 12 - - struct bcm2835_mbox_tag_get_clock_rate { - struct bcm2835_mbox_tag_hdr tag_hdr; --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0009-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0009-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch deleted file mode 100644 index bd515eb5a..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0009-mmc-bcm2835_sdhci-Add-support-for-bcm2711-device.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 6e0d51199f2d089c84f45202587a9f17abd1ab0a Mon Sep 17 00:00:00 2001 -From: Matthias Brugger -Date: Wed, 10 Jul 2019 13:24:36 +0200 -Subject: [PATCH 09/17] mmc: bcm2835_sdhci: Add support for bcm2711 device - -The bcm2711 has two emmc controller. The difference is the clocks -they use. Add support for the second emmc contoller. - -Signed-off-by: Matthias Brugger ---- - drivers/mmc/bcm2835_sdhci.c | 12 ++++++++++-- - 1 file changed, 10 insertions(+), 2 deletions(-) - -diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c -index 08bddd410e..e68dec3be7 100644 ---- a/drivers/mmc/bcm2835_sdhci.c -+++ b/drivers/mmc/bcm2835_sdhci.c -@@ -178,12 +178,13 @@ static int bcm2835_sdhci_probe(struct udevice *dev) - fdt_addr_t base; - int emmc_freq; - int ret; -+ int clock_id = (int)dev_get_driver_data(dev); - - base = devfdt_get_addr(dev); - if (base == FDT_ADDR_T_NONE) - return -EINVAL; - -- ret = bcm2835_get_mmc_clock(BCM2835_MBOX_CLOCK_ID_EMMC); -+ ret = bcm2835_get_mmc_clock(clock_id); - if (ret < 0) { - debug("%s: Failed to set MMC clock (err=%d)\n", __func__, ret); - return ret; -@@ -228,7 +229,14 @@ static int bcm2835_sdhci_probe(struct udevice *dev) - } - - static const struct udevice_id bcm2835_sdhci_match[] = { -- { .compatible = "brcm,bcm2835-sdhci" }, -+ { -+ .compatible = "brcm,bcm2835-sdhci", -+ .data = BCM2835_MBOX_CLOCK_ID_EMMC -+ }, -+ { -+ .compatible = "brcm,bcm2711-emmc2", -+ .data = BCM2835_MBOX_CLOCK_ID_EMMC2 -+ }, - { /* sentinel */ } - }; - --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0010-arm-bcm283x-Define-device-base-addresses-for-bcm2835.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0010-arm-bcm283x-Define-device-base-addresses-for-bcm2835.patch deleted file mode 100644 index 974e69ee5..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0010-arm-bcm283x-Define-device-base-addresses-for-bcm2835.patch +++ /dev/null @@ -1,63 +0,0 @@ -From c00c6048006ebe1822355b6ba4f2da8ccebb4786 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Fri, 12 Jul 2019 11:38:11 +0100 -Subject: [PATCH 10/17] arm: bcm283x: Define device base addresses for bcm2835 - -Signed-off-by: Andrei Gherzan ---- - arch/arm/mach-bcm283x/include/mach/sdhci.h | 4 ++++ - arch/arm/mach-bcm283x/include/mach/timer.h | 4 ++++ - arch/arm/mach-bcm283x/include/mach/wdog.h | 4 ++++ - 3 files changed, 12 insertions(+) - -diff --git a/arch/arm/mach-bcm283x/include/mach/sdhci.h b/arch/arm/mach-bcm283x/include/mach/sdhci.h -index 5cb6ec3340..262b016a1b 100644 ---- a/arch/arm/mach-bcm283x/include/mach/sdhci.h -+++ b/arch/arm/mach-bcm283x/include/mach/sdhci.h -@@ -7,7 +7,11 @@ - #define _BCM2835_SDHCI_H_ - - #ifndef CONFIG_BCM2835 -+#ifdef CONFIG_BCM2838 -+#define BCM2835_SDHCI_BASE 0xfe300000 -+#else - #define BCM2835_SDHCI_BASE 0x3f300000 -+#endif - #else - #define BCM2835_SDHCI_BASE 0x20300000 - #endif -diff --git a/arch/arm/mach-bcm283x/include/mach/timer.h b/arch/arm/mach-bcm283x/include/mach/timer.h -index 56b0c356bb..dc3ed98879 100644 ---- a/arch/arm/mach-bcm283x/include/mach/timer.h -+++ b/arch/arm/mach-bcm283x/include/mach/timer.h -@@ -7,7 +7,11 @@ - #define _BCM2835_TIMER_H - - #ifndef CONFIG_BCM2835 -+#ifdef CONFIG_BCM2838 -+#define BCM2835_TIMER_PHYSADDR 0xfe003000 -+#else - #define BCM2835_TIMER_PHYSADDR 0x3f003000 -+#endif - #else - #define BCM2835_TIMER_PHYSADDR 0x20003000 - #endif -diff --git a/arch/arm/mach-bcm283x/include/mach/wdog.h b/arch/arm/mach-bcm283x/include/mach/wdog.h -index 99c88e5df7..ef040f385d 100644 ---- a/arch/arm/mach-bcm283x/include/mach/wdog.h -+++ b/arch/arm/mach-bcm283x/include/mach/wdog.h -@@ -7,7 +7,11 @@ - #define _BCM2835_WDOG_H - - #ifndef CONFIG_BCM2835 -+#ifdef CONFIG_BCM2838 -+#define BCM2835_WDOG_PHYSADDR 0xfe100000 -+#else - #define BCM2835_WDOG_PHYSADDR 0x3f100000 -+#endif - #else - #define BCM2835_WDOG_PHYSADDR 0x20100000 - #endif --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0011-bcm2835-video-Bail-out-early-if-querying-video-infor.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0011-bcm2835-video-Bail-out-early-if-querying-video-infor.patch deleted file mode 100644 index 9d084ce82..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0011-bcm2835-video-Bail-out-early-if-querying-video-infor.patch +++ /dev/null @@ -1,36 +0,0 @@ -From d0357e50e58894eeb9dcbb1497689b410b667f08 Mon Sep 17 00:00:00 2001 -From: Fabian Vogt -Date: Fri, 28 Jun 2019 14:14:01 +0200 -Subject: [PATCH 11/17] bcm2835 video: Bail out early if querying video - information fails - -Otherwise there is a crash with newer RPi firmware, see -https://github.com/raspberrypi/firmware/issues/1157 ---- - drivers/video/bcm2835.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c -index bc41090aed..4c7962cad8 100644 ---- a/drivers/video/bcm2835.c -+++ b/drivers/video/bcm2835.c -@@ -19,13 +19,15 @@ static int bcm2835_video_probe(struct udevice *dev) - - debug("bcm2835: Query resolution...\n"); - ret = bcm2835_get_video_size(&w, &h); -- if (ret) -+ if (ret || w == 0 || h == 0) - return -EIO; - - debug("bcm2835: Setting up display for %d x %d\n", w, h); - ret = bcm2835_set_video_params(&w, &h, 32, BCM2835_MBOX_PIXEL_ORDER_RGB, - BCM2835_MBOX_ALPHA_MODE_IGNORED, - &fb_base, &fb_size, &pitch); -+ if(ret) -+ return -EIO; - - debug("bcm2835: Final resolution is %d x %d\n", w, h); - --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0012-bcm283x-mbox-Correctly-wait-for-space-to-send.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0012-bcm283x-mbox-Correctly-wait-for-space-to-send.patch deleted file mode 100644 index abba33b03..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0012-bcm283x-mbox-Correctly-wait-for-space-to-send.patch +++ /dev/null @@ -1,65 +0,0 @@ -From 2cbeae8a88c3f50e322a2434cbbf37bfe0b76d9a Mon Sep 17 00:00:00 2001 -From: Fabian Vogt -Date: Fri, 28 Jun 2019 14:25:53 +0200 -Subject: [PATCH 12/17] bcm283x mbox: Correctly wait for space to send - -For sending, the second mailbox is used, but previously the status register of -the first one was read. ---- - arch/arm/mach-bcm283x/include/mach/mbox.h | 7 +++++-- - arch/arm/mach-bcm283x/mbox.c | 6 +++--- - 2 files changed, 8 insertions(+), 5 deletions(-) - -diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h -index cad035e8cd..cd78966150 100644 ---- a/arch/arm/mach-bcm283x/include/mach/mbox.h -+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h -@@ -51,9 +51,12 @@ - struct bcm2835_mbox_regs { - u32 read; - u32 rsvd0[5]; -- u32 status; -- u32 config; -+ u32 status_r; -+ u32 config_r; - u32 write; -+ u32 rsvd1[5]; -+ u32 status_w; -+ u32 config_w; - }; - - #define BCM2835_MBOX_STATUS_WR_FULL 0x80000000 -diff --git a/arch/arm/mach-bcm283x/mbox.c b/arch/arm/mach-bcm283x/mbox.c -index 1642ebd103..f7483bf423 100644 ---- a/arch/arm/mach-bcm283x/mbox.c -+++ b/arch/arm/mach-bcm283x/mbox.c -@@ -27,7 +27,7 @@ int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv) - /* Drain any stale responses */ - - for (;;) { -- val = readl(®s->status); -+ val = readl(®s->status_r); - if (val & BCM2835_MBOX_STATUS_RD_EMPTY) - break; - if (get_timer(0) >= endtime) { -@@ -40,7 +40,7 @@ int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv) - /* Wait for space to send */ - - for (;;) { -- val = readl(®s->status); -+ val = readl(®s->status_w); - if (!(val & BCM2835_MBOX_STATUS_WR_FULL)) - break; - if (get_timer(0) >= endtime) { -@@ -58,7 +58,7 @@ int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv) - /* Wait for the response */ - - for (;;) { -- val = readl(®s->status); -+ val = readl(®s->status_r); - if (!(val & BCM2835_MBOX_STATUS_RD_EMPTY)) - break; - if (get_timer(0) >= endtime) { --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0013-config-rpi4-Add-defconfig-for-rpi4-32.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0013-config-rpi4-Add-defconfig-for-rpi4-32.patch deleted file mode 100644 index 1558712bb..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0013-config-rpi4-Add-defconfig-for-rpi4-32.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 21a3e9ed27f83d83851cbee57ee6d83a58ef2775 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Fri, 12 Jul 2019 11:55:52 +0100 -Subject: [PATCH 13/17] config: rpi4: Add defconfig for rpi4-32 - -Signed-off-by: Andrei Gherzan ---- - configs/rpi_4_32b_defconfig | 43 +++++++++++++++++++++++++++++++++++++ - 1 file changed, 43 insertions(+) - create mode 100644 configs/rpi_4_32b_defconfig - -diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig -new file mode 100644 -index 0000000000..9f2b805d0f ---- /dev/null -+++ b/configs/rpi_4_32b_defconfig -@@ -0,0 +1,43 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_BCM283X=y -+CONFIG_SYS_TEXT_BASE=0x00008000 -+CONFIG_TARGET_RPI_4_32B=y -+CONFIG_SYS_MALLOC_F_LEN=0x2000 -+CONFIG_DISTRO_DEFAULTS=y -+CONFIG_NR_DRAM_BANKS=1 -+CONFIG_OF_BOARD_SETUP=y -+CONFIG_MISC_INIT_R=y -+# CONFIG_DISPLAY_CPUINFO is not set -+# CONFIG_DISPLAY_BOARDINFO is not set -+CONFIG_SYS_PROMPT="U-Boot> " -+# CONFIG_CMD_FLASH is not set -+CONFIG_CMD_GPIO=y -+CONFIG_CMD_MMC=y -+CONFIG_CMD_USB=y -+CONFIG_CMD_FS_UUID=y -+CONFIG_OF_EMBED=y -+CONFIG_DEFAULT_DEVICE_TREE="bcm2838-rpi-4-b" -+CONFIG_ENV_FAT_INTERFACE="mmc" -+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" -+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -+CONFIG_DM_KEYBOARD=y -+CONFIG_DM_MMC=y -+CONFIG_MMC_SDHCI=y -+CONFIG_MMC_SDHCI_BCM2835=y -+CONFIG_PHYLIB=y -+CONFIG_DM_ETH=y -+CONFIG_PINCTRL=y -+# CONFIG_PINCTRL_GENERIC is not set -+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set -+CONFIG_USB=y -+CONFIG_DM_USB=y -+CONFIG_USB_DWC2=y -+CONFIG_USB_KEYBOARD=y -+CONFIG_USB_HOST_ETHER=y -+CONFIG_USB_ETHER_LAN78XX=y -+CONFIG_USB_ETHER_SMSC95XX=y -+CONFIG_DM_VIDEO=y -+CONFIG_SYS_WHITE_ON_BLACK=y -+CONFIG_CONSOLE_SCROLL_LINES=10 -+CONFIG_PHYS_TO_BUS=y -+CONFIG_OF_LIBFDT_OVERLAY=y --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0014-dts-bcm2838-rpi-4-b-Use-the-emmc2-interface-for-sdhc.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0014-dts-bcm2838-rpi-4-b-Use-the-emmc2-interface-for-sdhc.patch deleted file mode 100644 index 7a1d33f73..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0014-dts-bcm2838-rpi-4-b-Use-the-emmc2-interface-for-sdhc.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 07801a834dfe2d53827ad5a61fe3d59776e0c5b1 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Fri, 12 Jul 2019 11:58:42 +0100 -Subject: [PATCH 14/17] dts: bcm2838-rpi-4-b: Use the emmc2 interface for sdhci - -Signed-off-by: Andrei Gherzan ---- - arch/arm/dts/bcm2838-rpi-4-b.dts | 16 ++++++---------- - 1 file changed, 6 insertions(+), 10 deletions(-) - -diff --git a/arch/arm/dts/bcm2838-rpi-4-b.dts b/arch/arm/dts/bcm2838-rpi-4-b.dts -index 07e9a78e8d..168179c17c 100644 ---- a/arch/arm/dts/bcm2838-rpi-4-b.dts -+++ b/arch/arm/dts/bcm2838-rpi-4-b.dts -@@ -30,21 +30,17 @@ - status = "okay"; - }; - --/* SDHCI is used to control the SDIO for wireless */ - &sdhci { -- pinctrl-names = "default"; -- pinctrl-0 = <&emmc_gpio34>; -- status = "okay"; -- bus-width = <4>; -- non-removable; -+ status = "disabled"; - }; - --/* SDHOST is used to drive the SD card */ - &sdhost { -- pinctrl-names = "default"; -- pinctrl-0 = <&sdhost_gpio48>; -+ status = "disabled"; -+}; -+ -+&emmc2 { -+ compatible = "brcm,bcm2835-sdhci"; - status = "okay"; -- bus-width = <4>; - }; - - &gpio { --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0015-rpi-Add-memory-map-for-bcm2838.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0015-rpi-Add-memory-map-for-bcm2838.patch deleted file mode 100644 index 8510637cc..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0015-rpi-Add-memory-map-for-bcm2838.patch +++ /dev/null @@ -1,58 +0,0 @@ -From bfa71106beb565c2f3bc2f5f948477e0d3801285 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Fri, 12 Jul 2019 14:27:31 +0100 -Subject: [PATCH 15/17] rpi: Add memory map for bcm2838 - -Signed-off-by: Andrei Gherzan ---- - board/raspberrypi/rpi/rpi.c | 27 ++++++++++++++++++++++++--- - 1 file changed, 24 insertions(+), 3 deletions(-) - -diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c -index 6d6f1ef39a..4242ef35a4 100644 ---- a/board/raspberrypi/rpi/rpi.c -+++ b/board/raspberrypi/rpi/rpi.c -@@ -249,7 +249,8 @@ static uint32_t rev_type; - static const struct rpi_model *model; - - #ifdef CONFIG_ARM64 --static struct mm_region bcm2837_mem_map[] = { -+#ifndef CONFIG_BCM2838 -+static struct mm_region bcm283x_mem_map[] = { - { - .virt = 0x00000000UL, - .phys = 0x00000000UL, -@@ -268,8 +269,28 @@ static struct mm_region bcm2837_mem_map[] = { - 0, - } - }; -- --struct mm_region *mem_map = bcm2837_mem_map; -+#else -+static struct mm_region bcm283x_mem_map[] = { -+ { -+ .virt = 0x00000000UL, -+ .phys = 0x00000000UL, -+ .size = 0xf3000000UL, -+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | -+ PTE_BLOCK_INNER_SHARE -+ }, { -+ .virt = 0xfe000000UL, -+ .phys = 0xfe000000UL, -+ .size = 0x01800000UL, -+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | -+ PTE_BLOCK_NON_SHARE | -+ PTE_BLOCK_PXN | PTE_BLOCK_UXN -+ }, { -+ /* List terminator */ -+ 0, -+ } -+}; -+#endif -+struct mm_region *mem_map = bcm283x_mem_map; - #endif - - int dram_init(void) --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0016-configs-rpi4-Remove-DWC2-and-USB_ETHER-configs.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0016-configs-rpi4-Remove-DWC2-and-USB_ETHER-configs.patch deleted file mode 100644 index 0bc54c85e..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0016-configs-rpi4-Remove-DWC2-and-USB_ETHER-configs.patch +++ /dev/null @@ -1,52 +0,0 @@ -From c73747171c8a91e204405e144d0906c439d3bff3 Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Mon, 15 Jul 2019 14:05:25 +0100 -Subject: [PATCH 16/17] configs: rpi4: Remove DWC2 and USB_ETHER configs - -dwc2 is only connected to the usb-c port so we don't have any real -benefit in having it enabled in uboot. - -Also, the GENET interface is connected directly to the SoC so we can -drop the USB_ETHER configs. - -Signed-off-by: Andrei Gherzan ---- - configs/rpi_4_32b_defconfig | 3 --- - configs/rpi_4_defconfig | 3 --- - 2 files changed, 6 deletions(-) - -diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig -index 9f2b805d0f..b71a14735a 100644 ---- a/configs/rpi_4_32b_defconfig -+++ b/configs/rpi_4_32b_defconfig -@@ -31,11 +31,8 @@ CONFIG_PINCTRL=y - # CONFIG_REQUIRE_SERIAL_CONSOLE is not set - CONFIG_USB=y - CONFIG_DM_USB=y --CONFIG_USB_DWC2=y - CONFIG_USB_KEYBOARD=y - CONFIG_USB_HOST_ETHER=y --CONFIG_USB_ETHER_LAN78XX=y --CONFIG_USB_ETHER_SMSC95XX=y - CONFIG_DM_VIDEO=y - CONFIG_SYS_WHITE_ON_BLACK=y - CONFIG_CONSOLE_SCROLL_LINES=10 -diff --git a/configs/rpi_4_defconfig b/configs/rpi_4_defconfig -index 83d1bd0cdb..b27e3f823b 100644 ---- a/configs/rpi_4_defconfig -+++ b/configs/rpi_4_defconfig -@@ -31,11 +31,8 @@ CONFIG_PINCTRL=y - # CONFIG_REQUIRE_SERIAL_CONSOLE is not set - CONFIG_USB=y - CONFIG_DM_USB=y --CONFIG_USB_DWC2=y - CONFIG_USB_KEYBOARD=y - CONFIG_USB_HOST_ETHER=y --CONFIG_USB_ETHER_LAN78XX=y --CONFIG_USB_ETHER_SMSC95XX=y - CONFIG_DM_VIDEO=y - CONFIG_SYS_WHITE_ON_BLACK=y - CONFIG_CONSOLE_SCROLL_LINES=10 --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0017-dts-bcm2838-rpi-4-b-Use-the-emmc2-2811-compatible-st.patch b/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0017-dts-bcm2838-rpi-4-b-Use-the-emmc2-2811-compatible-st.patch deleted file mode 100644 index 4481f4157..000000000 --- a/buildroot-external/board/raspberrypi/rpi4/patches/uboot/0017-dts-bcm2838-rpi-4-b-Use-the-emmc2-2811-compatible-st.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 62b6e39a53c56a9085aeab1b47b5cc6020fcdb6f Mon Sep 17 00:00:00 2001 -From: Andrei Gherzan -Date: Mon, 15 Jul 2019 14:11:10 +0100 -Subject: [PATCH 17/17] dts: bcm2838-rpi-4-b: Use the emmc2/2811 compatible - string for SDHCI - -Signed-off-by: Andrei Gherzan ---- - arch/arm/dts/bcm2838-rpi-4-b.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/arch/arm/dts/bcm2838-rpi-4-b.dts b/arch/arm/dts/bcm2838-rpi-4-b.dts -index 168179c17c..b7241be3fd 100644 ---- a/arch/arm/dts/bcm2838-rpi-4-b.dts -+++ b/arch/arm/dts/bcm2838-rpi-4-b.dts -@@ -39,7 +39,7 @@ - }; - - &emmc2 { -- compatible = "brcm,bcm2835-sdhci"; -+ compatible = "brcm,bcm2711-emmc2"; - status = "okay"; - }; - --- -2.17.1 - diff --git a/buildroot-external/board/raspberrypi/uboot.config b/buildroot-external/board/raspberrypi/uboot.config index f358c84db..622f91b73 100644 --- a/buildroot-external/board/raspberrypi/uboot.config +++ b/buildroot-external/board/raspberrypi/uboot.config @@ -1,4 +1,3 @@ -# CONFIG_USB_STORAGE is not set # CONFIG_DOS_PARTITION is not set CONFIG_CMD_FILEENV=y CONFIG_ENV_IS_NOWHERE=Y @@ -7,4 +6,3 @@ CONFIG_USB_FUNCTION_MASS_STORAGE=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_OHCI_HCD=y -# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set \ No newline at end of file diff --git a/buildroot-external/bootloader/uboot.config b/buildroot-external/bootloader/uboot.config index 3887259b9..c7ea69e70 100644 --- a/buildroot-external/bootloader/uboot.config +++ b/buildroot-external/bootloader/uboot.config @@ -3,7 +3,7 @@ CONFIG_DISTRO_DEFAULTS=y # CONFIG_EXPERT is not set # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_BOOTDELAY=2 +CONFIG_BOOTDELAY=-2 CONFIG_SYS_PROMPT="HassOS> " # CONFIG_ISO_PARTITION is not set CONFIG_EFI_PARTITION=y @@ -11,6 +11,5 @@ CONFIG_FS_EXT4=y CONFIG_FS_FAT=y # CONFIG_ENV_IS_IN_FAT is not set # CONFIG_ENV_IS_IN_EXT4 is not set -CONFIG_CONSOLE_SCROLL_LINES=10 # CONFIG_EFI_LOADER is not set CONFIG_CMD_SETEXPR=y diff --git a/buildroot-external/configs/intel_nuc_defconfig b/buildroot-external/configs/intel_nuc_defconfig index 4ac5086db..6b7713fcc 100644 --- a/buildroot-external/configs/intel_nuc_defconfig +++ b/buildroot-external/configs/intel_nuc_defconfig @@ -19,12 +19,13 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.68" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.11" BR2_LINUX_KERNEL_DEFCONFIG="x86_64" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/nuc/kernel.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config" BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y BR2_PACKAGE_PROCPS_NG=y @@ -62,7 +63,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -77,6 +77,8 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set @@ -87,7 +89,6 @@ BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG=y BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/barebox.config" BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/barebox.config" BR2_TARGET_BAREBOX_CUSTOM_EMBEDDED_ENV_PATH="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/barebox" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_E2FSPROGS=y BR2_PACKAGE_HOST_GPTFDISK=y @@ -95,12 +96,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/intel-nuc-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/odroid_c2_defconfig b/buildroot-external/configs/odroid_c2_defconfig index bd6275c00..f63668bfa 100644 --- a/buildroot-external/configs/odroid_c2_defconfig +++ b/buildroot-external/configs/odroid_c2_defconfig @@ -2,7 +2,7 @@ BR2_aarch64=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -19,7 +19,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.68" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.11" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/kernel.config" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" @@ -56,7 +56,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -70,18 +69,20 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-c2" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/uboot-boot.ush" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_E2FSPROGS=y BR2_PACKAGE_HOST_GPTFDISK=y @@ -89,14 +90,15 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-c2-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" BR2_PACKAGE_APPARMOR=y BR2_PACKAGE_HARDKERNEL_BOOT=y +BR2_PACKAGE_HARDKERNEL_BOOT_ODROID_C2=y diff --git a/buildroot-external/configs/opi_prime_defconfig b/buildroot-external/configs/odroid_n2_defconfig similarity index 67% rename from buildroot-external/configs/opi_prime_defconfig rename to buildroot-external/configs/odroid_n2_defconfig index 6df617f4f..29917e47b 100644 --- a/buildroot-external/configs/opi_prime_defconfig +++ b/buildroot-external/configs/odroid_n2_defconfig @@ -1,10 +1,8 @@ BR2_aarch64=y -BR2_cortex_a53=y -BR2_ARM_FPU_VFPV4=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -13,42 +11,23 @@ BR2_GCC_ENABLE_LTO=y BR2_TARGET_GENERIC_HOSTNAME="hassio" BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y -BR2_TARGET_GENERIC_GETTY_PORT="tty0" +BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" -BR2_TARGET_UBOOT_BOOT_SCRIPT=y -BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime/uboot-boot.ush" -BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime/uboot.config" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.68" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime" -BR2_LINUX_KERNEL_LZ4=y -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y -BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/kernel.config" BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/hassos-hook.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.11" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" +BR2_LINUX_KERNEL_LZ4=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="amlogic/meson-g12b-odroid-n2" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config" BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y BR2_PACKAGE_PROCPS_NG=y @@ -56,8 +35,6 @@ BR2_PACKAGE_JQ=y BR2_PACKAGE_E2FSPROGS=y BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y BR2_PACKAGE_SQUASHFS=y -BR2_PACKAGE_LINUX_FIRMWARE=y -BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y BR2_PACKAGE_GPTFDISK=y BR2_PACKAGE_GPTFDISK_SGDISK=y BR2_PACKAGE_UBOOT_TOOLS=y @@ -71,6 +48,7 @@ BR2_PACKAGE_AVAHI_DAEMON=y BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y BR2_PACKAGE_BLUEZ5_UTILS=y BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y +BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED=y BR2_PACKAGE_DHCP=y BR2_PACKAGE_DHCP_CLIENT=y BR2_PACKAGE_WIREGUARD=y @@ -78,12 +56,12 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y BR2_PACKAGE_RAUC=y BR2_PACKAGE_RAUC_NETWORK=y +BR2_PACKAGE_RNG_TOOLS=y # BR2_PACKAGE_SYSTEMD_HWDB is not set # BR2_PACKAGE_SYSTEMD_NETWORKD is not set BR2_PACKAGE_SYSTEMD_RANDOMSEED=y @@ -91,25 +69,36 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-n2" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/uboot.config" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/uboot-boot.ush" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_E2FSPROGS=y BR2_PACKAGE_HOST_GPTFDISK=y BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y -BR2_PACKAGE_HOST_SWIG=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" -BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/orangepi-prime-homeassistant" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" +BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-n2-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" BR2_PACKAGE_APPARMOR=y +BR2_PACKAGE_HARDKERNEL_BOOT=y +BR2_PACKAGE_HARDKERNEL_BOOT_ODROID_N2=y diff --git a/buildroot-external/configs/odroid_xu4_defconfig b/buildroot-external/configs/odroid_xu4_defconfig index 3463389ed..b9dca129a 100644 --- a/buildroot-external/configs/odroid_xu4_defconfig +++ b/buildroot-external/configs/odroid_xu4_defconfig @@ -3,7 +3,7 @@ BR2_cortex_a7=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -20,7 +20,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.68" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.11" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y @@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -73,20 +72,22 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-xu3" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/uboot-boot.ush" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_E2FSPROGS=y BR2_PACKAGE_HOST_GPTFDISK=y @@ -94,12 +95,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/odroid-xu-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/ova_defconfig b/buildroot-external/configs/ova_defconfig index 8bb61c071..83480e46c 100644 --- a/buildroot-external/configs/ova_defconfig +++ b/buildroot-external/configs/ova_defconfig @@ -19,13 +19,13 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.68" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.11" BR2_LINUX_KERNEL_DEFCONFIG="x86_64" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/intel/ova/kernel.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config" BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y BR2_PACKAGE_PROCPS_NG=y @@ -52,11 +52,11 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y BR2_PACKAGE_OPENVMTOOLS=y +BR2_PACKAGE_QEMU_GUEST_AGENT=y BR2_PACKAGE_RAUC=y BR2_PACKAGE_RAUC_NETWORK=y BR2_PACKAGE_RNG_TOOLS=y @@ -67,6 +67,8 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set @@ -85,12 +87,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/amd64-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/qemux86-64-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/amd64-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi0_w_defconfig b/buildroot-external/configs/rpi0_w_defconfig index 377cc84cc..1f739793c 100644 --- a/buildroot-external/configs/rpi0_w_defconfig +++ b/buildroot-external/configs/rpi0_w_defconfig @@ -4,7 +4,7 @@ BR2_ARM_EABIHF=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi0-w $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w" @@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -73,13 +72,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_0_w" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -92,12 +93,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi2_defconfig b/buildroot-external/configs/rpi2_defconfig index c44f3515e..cb426987a 100644 --- a/buildroot-external/configs/rpi2_defconfig +++ b/buildroot-external/configs/rpi2_defconfig @@ -4,7 +4,7 @@ BR2_ARM_FPU_VFPV4=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi2 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2709-rpi-2-b" @@ -58,7 +58,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -72,13 +71,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_2" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -91,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi2-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi3_64_defconfig b/buildroot-external/configs/rpi3_64_defconfig index 0f551aa26..45f5c735f 100644 --- a/buildroot-external/configs/rpi3_64_defconfig +++ b/buildroot-external/configs/rpi3_64_defconfig @@ -4,7 +4,7 @@ BR2_ARM_FPU_VFPV4=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2837-rpi-3-b broadcom/bcm2710-rpi-3-b-plus" @@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -73,13 +72,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_3" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -92,12 +93,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-64-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi3_defconfig b/buildroot-external/configs/rpi3_defconfig index d617446dd..9b53d9871 100644 --- a/buildroot-external/configs/rpi3_defconfig +++ b/buildroot-external/configs/rpi3_defconfig @@ -4,7 +4,7 @@ BR2_ARM_FPU_VFPV4=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi3 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3" @@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -73,13 +72,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_3_32b" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -92,12 +93,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi3-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi4_64_defconfig b/buildroot-external/configs/rpi4_64_defconfig index 08b4d0d6b..0d95caced 100644 --- a/buildroot-external/configs/rpi4_64_defconfig +++ b/buildroot-external/configs/rpi4_64_defconfig @@ -4,7 +4,7 @@ BR2_ARM_FPU_NEON_VFPV4=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4-64 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b" @@ -60,7 +60,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -74,13 +73,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_4" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -93,12 +94,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi4-64-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi4_defconfig b/buildroot-external/configs/rpi4_defconfig index 5e29b0f2f..5883ed932 100644 --- a/buildroot-external/configs/rpi4_defconfig +++ b/buildroot-external/configs/rpi4_defconfig @@ -4,7 +4,7 @@ BR2_ARM_FPU_NEON_VFPV4=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi4 $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2711-rpi-4-b" @@ -60,7 +60,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -74,13 +73,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_4_32b" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -93,12 +94,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi4-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/rpi_defconfig b/buildroot-external/configs/rpi_defconfig index 31de55531..5171c0076 100644 --- a/buildroot-external/configs/rpi_defconfig +++ b/buildroot-external/configs/rpi_defconfig @@ -4,7 +4,7 @@ BR2_ARM_EABIHF=y BR2_DL_DIR="/cache/dl" BR2_CCACHE=y BR2_CCACHE_DIR="/cache/cc" -BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches" +BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/patches" BR2_TOOLCHAIN_BUILDROOT_GLIBC=y BR2_GCC_VERSION_7_X=y BR2_TOOLCHAIN_BUILDROOT_CXX=y @@ -15,16 +15,16 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS" BR2_INIT_SYSTEMD=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" # BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set -BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay" +BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rootfs-overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/rpi $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="64f2b1b0a728a13373f9c74c6247ecf17af2caef" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="b4180819d3a119c56133d6a2d8301775bf6c60bb" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/kernel.config" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" BR2_LINUX_KERNEL_LZ4=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm" @@ -58,7 +58,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -72,13 +71,15 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/raspberrypi/uboot.config" BR2_TARGET_UBOOT_BOOT_SCRIPT=y @@ -91,12 +92,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armhf-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/raspberrypi-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armhf-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/configs/tinker_defconfig b/buildroot-external/configs/tinker_defconfig index e46b2ec4e..dcfc07377 100644 --- a/buildroot-external/configs/tinker_defconfig +++ b/buildroot-external/configs/tinker_defconfig @@ -21,7 +21,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker $(BR2_EXTERNAL_HASSOS_PATH)/board/asus/hassos-hook.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.68" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.88" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/asus/tinker/kernel.config" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config" @@ -59,7 +59,6 @@ BR2_PACKAGE_DROPBEAR=y # BR2_PACKAGE_DROPBEAR_CLIENT is not set # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set BR2_PACKAGE_NETWORK_MANAGER=y -BR2_PACKAGE_NETWORK_MANAGER_MODEM_MANAGER=y BR2_PACKAGE_TINI=y BR2_PACKAGE_DOCKER_ENGINE=y BR2_PACKAGE_DOCKER_CLI=y @@ -73,6 +72,8 @@ BR2_PACKAGE_SYSTEMD_RANDOMSEED=y BR2_PACKAGE_SYSTEMD_COREDUMP=y BR2_PACKAGE_UTIL_LINUX_PARTX=y BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y +BR2_PACKAGE_USB_MODESWITCH=y +BR2_PACKAGE_USB_MODESWITCH_DATA=y BR2_TARGET_ROOTFS_SQUASHFS=y BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y # BR2_TARGET_ROOTFS_TAR is not set @@ -96,12 +97,12 @@ BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_RAUC=y BR2_PACKAGE_HASSOS=y BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/armv7-hassio-supervisor" -BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="184" +BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195" BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/tinker-homeassistant" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor" BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt" BR2_PACKAGE_HASSOS_CLI="homeassistant/armv7-hassio-cli" -BR2_PACKAGE_HASSOS_CLI_VERSION="14" +BR2_PACKAGE_HASSOS_CLI_VERSION="15" BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2" BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default" BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor" diff --git a/buildroot-external/kernel/device-support.config b/buildroot-external/kernel/device-support.config index 31edda16f..6e75350d5 100644 --- a/buildroot-external/kernel/device-support.config +++ b/buildroot-external/kernel/device-support.config @@ -1,9 +1,12 @@ CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_CH341=m CONFIG_USB_ACM=m +CONFIG_USB_USBNET=m diff --git a/buildroot-external/kernel/hassos.config b/buildroot-external/kernel/hassos.config index b55fff013..9e4a40bf0 100644 --- a/buildroot-external/kernel/hassos.config +++ b/buildroot-external/kernel/hassos.config @@ -4,6 +4,8 @@ CONFIG_CMDLINE="" CONFIG_ZRAM=y CONFIG_ZSMALLOC=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y + CONFIG_MISC_FILESYSTEMS=y CONFIG_BLOCK=y CONFIG_EXT4_FS=y diff --git a/buildroot-external/meta b/buildroot-external/meta index b622a6373..dcbfbbb4c 100644 --- a/buildroot-external/meta +++ b/buildroot-external/meta @@ -1,5 +1,5 @@ -VERSION_MAJOR=3 -VERSION_BUILD=4 +VERSION_MAJOR=4 +VERSION_BUILD=0 HASSOS_NAME="HassOS" HASSOS_ID="hassos" diff --git a/buildroot-external/misc/rauc-hook b/buildroot-external/misc/rauc-hook index 851472e94..de24bf499 100755 --- a/buildroot-external/misc/rauc-hook +++ b/buildroot-external/misc/rauc-hook @@ -31,14 +31,5 @@ fi ## # Fixups -# timesyncd -if [ -L /var/lib/systemd/timesync ]; then - rm -f /var/lib/systemd/timesync -fi - -# u-boot first stage device tree -if [ -e /usr/sbin/fw_setenv ]; then - fw_setenv fdt_addr -fi exit 0 diff --git a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx deleted file mode 100755 index f21193ef9..000000000 --- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx +++ /dev/null @@ -1,18 +0,0 @@ -#!/bin/sh - -HCIATTACH=/usr/bin/hciattach -SERIAL=`cat /proc/device-tree/serial-number | cut -c9-` -B1=`echo $SERIAL | cut -c3-4` -B2=`echo $SERIAL | cut -c5-6` -B3=`echo $SERIAL | cut -c7-8` -BDADDR=`printf b8:27:eb:%02x:%02x:%02x $((0x$B1 ^ 0xaa)) $((0x$B2 ^ 0xaa)) $((0x$B3 ^ 0xaa))` - -if [ "$(cat /proc/device-tree/aliases/uart0)" = "$(cat /proc/device-tree/aliases/serial1)" ] ; then - if [ "$(wc -c /proc/device-tree/soc/gpio@7e200000/uart0_pins/brcm\,pins | cut -f 1 -d ' ')" = "16" ] ; then - $HCIATTACH /dev/serial1 bcm43xx 3000000 flow - $BDADDR - else - $HCIATTACH /dev/serial1 bcm43xx 921600 noflow - $BDADDR - fi -else - $HCIATTACH /dev/serial1 bcm43xx 460800 noflow - $BDADDR -fi diff --git a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk index 65641f661..8df6d77b4 100644 --- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk +++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.mk @@ -11,21 +11,28 @@ BLUETOOTH_BCM43XX_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-bcm43xx BLUETOOTH_BCM43XX_SITE_METHOD = local define BLUETOOTH_BCM43XX_BUILD_CMDS - curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/96eefffcccc725425fd83be5e0704a5c32b79e54/broadcom/BCM43430A1.hcd - curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/96eefffcccc725425fd83be5e0704a5c32b79e54/broadcom/BCM4345C0.hcd + curl -L -o $(@D)/BCM43430A1.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/fff76cb15527c435ce99a9787848eacd6288282c/broadcom/BCM43430A1.hcd + curl -L -o $(@D)/BCM4345C0.hcd https://raw.githubusercontent.com/RPi-Distro/bluez-firmware/fff76cb15527c435ce99a9787848eacd6288282c/broadcom/BCM4345C0.hcd + curl -L -o $(@D)/btuart https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/cbdbcb66bcc5b9af05f1a9fffe2254c872bb0ace/usr/bin/btuart + curl -L -o $(@D)/bthelper https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/cbdbcb66bcc5b9af05f1a9fffe2254c872bb0ace/usr/bin/bthelper + curl -L -o $(@D)/90-pi-bluetooth.rules https://raw.githubusercontent.com/RPi-Distro/pi-bluetooth/cbdbcb66bcc5b9af05f1a9fffe2254c872bb0ace/lib/udev/rules.d/90-pi-bluetooth.rules endef define BLUETOOTH_BCM43XX_INSTALL_TARGET_CMDS $(INSTALL) -d $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants - $(INSTALL) -m 0755 $(@D)/bluetooth-bcm43xx $(TARGET_DIR)/usr/sbin/ $(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.service $(TARGET_DIR)/usr/lib/systemd/system/ + $(INSTALL) -m 0644 $(@D)/bthelper@.service $(TARGET_DIR)/usr/lib/systemd/system/ ln -fs /usr/lib/systemd/system/bluetooth-bcm43xx.service $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants/ + $(INSTALL) -d $(TARGET_DIR)/usr/bin + $(INSTALL) -m 0755 $(@D)/btuart $(TARGET_DIR)/usr/bin/ + $(INSTALL) -m 0755 $(@D)/bthelper $(TARGET_DIR)/usr/bin/ + $(INSTALL) -d $(TARGET_DIR)/lib/firmware/brcm $(INSTALL) -m 0644 $(@D)/*.hcd $(TARGET_DIR)/lib/firmware/brcm/ $(INSTALL) -d $(TARGET_DIR)/usr/lib/udev/rules.d - $(INSTALL) -m 0644 $(@D)/bluetooth-bcm43xx.rules $(TARGET_DIR)/usr/lib/udev/rules.d/ + $(INSTALL) -m 0644 $(@D)/90-pi-bluetooth.rules $(TARGET_DIR)/usr/lib/udev/rules.d/ endef $(eval $(generic-package)) diff --git a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.rules b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.rules deleted file mode 100644 index 461fc1c84..000000000 --- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.rules +++ /dev/null @@ -1,22 +0,0 @@ -KERNEL=="ttyAMA[01]", PROGRAM="/bin/sh -c '\ - ALIASES=/proc/device-tree/aliases; \ - if cmp -s $ALIASES/uart0 $ALIASES/serial0; then \ - echo 0;\ - elif cmp -s $ALIASES/uart0 $ALIASES/serial1; then \ - echo 1; \ - else \ - exit 1; \ - fi\ -'", SYMLINK+="serial%c" - -KERNEL=="ttyS0", PROGRAM="/bin/sh -c '\ - ALIASES=/proc/device-tree/aliases; \ - if cmp -s $ALIASES/uart1 $ALIASES/serial0; then \ - echo 0; \ - elif cmp -s $ALIASES/uart1 $ALIASES/serial1; then \ - echo 1; \ - else \ - exit 1; \ - fi \ -'", SYMLINK+="serial%c" - diff --git a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service index 0fc39375f..ab006d73e 100644 --- a/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service +++ b/buildroot-external/package/bluetooth-bcm43xx/bluetooth-bcm43xx.service @@ -1,12 +1,13 @@ [Unit] Description=Bluetooth for BCM43xx Before=bluetooth.service -After=dev-ttyAMA0.device +Requires=dev-serial1.device +After=dev-serial1.device ConditionFileNotEmpty=/proc/device-tree/soc/gpio@7e200000/bt_pins/brcm,pins [Service] Type=forking -ExecStart=/usr/sbin/bluetooth-bcm43xx +ExecStart=/usr/bin/btuart [Install] WantedBy=hassos-hardware.target diff --git a/buildroot-external/package/bluetooth-bcm43xx/bthelper@.service b/buildroot-external/package/bluetooth-bcm43xx/bthelper@.service new file mode 100644 index 000000000..c8a16c15f --- /dev/null +++ b/buildroot-external/package/bluetooth-bcm43xx/bthelper@.service @@ -0,0 +1,8 @@ +[Unit] +Description=Raspberry Pi bluetooth helper +Requires=bluetooth.service +After=bluetooth.service + +[Service] +Type=simple +ExecStart=/usr/bin/bthelper %I diff --git a/buildroot-external/package/bluetooth-rtl8723/bluetooth-rtl8723.mk b/buildroot-external/package/bluetooth-rtl8723/bluetooth-rtl8723.mk index 9399f9f45..10fecae45 100644 --- a/buildroot-external/package/bluetooth-rtl8723/bluetooth-rtl8723.mk +++ b/buildroot-external/package/bluetooth-rtl8723/bluetooth-rtl8723.mk @@ -11,10 +11,10 @@ BLUETOOTH_RTL8723_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-rtl8723 BLUETOOTH_RTL8723_SITE_METHOD = local define BLUETOOTH_RTL8723_BUILD_CMDS - curl -L -o $(@D)/rtk_hciattach https://raw.githubusercontent.com/armbian/build/dee62df8bb2fe8611fd41ddf02063fa15533298c/packages/bsp/rockchip/rtk_hciattach + curl -L -o $(@D)/rtk_hciattach https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtk_hciattach - curl -L -o $(@D)/rtl8723b_config https://raw.githubusercontent.com/armbian/firmware/4723bbb3d1ef70b5fbe7d2599c47d078ab125c47/rtl_bt/rtl8723b_config.bin - curl -L -o $(@D)/rtl8723b_fw https://raw.githubusercontent.com/armbian/firmware/4723bbb3d1ef70b5fbe7d2599c47d078ab125c47/rtl_bt/rtl8723b_fw.bin + curl -L -o $(@D)/rtl8723b_config https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtl8723b_config.bin + curl -L -o $(@D)/rtl8723b_fw https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtl8723b_fw.bin endef define BLUETOOTH_RTL8723_INSTALL_TARGET_CMDS diff --git a/buildroot-external/package/hardkernel-boot/Config.in b/buildroot-external/package/hardkernel-boot/Config.in index fe652e3dc..0940e116c 100644 --- a/buildroot-external/package/hardkernel-boot/Config.in +++ b/buildroot-external/package/hardkernel-boot/Config.in @@ -19,6 +19,11 @@ config BR2_PACKAGE_HARDKERNEL_BOOT_ODROID_XU4 help For the Odroid-XU4 +config BR2_PACKAGE_HARDKERNEL_BOOT_ODROID_N2 + bool "Odroid-N2" + help + For the Odroid-N2 + endchoice endif diff --git a/buildroot-external/package/hardkernel-boot/hardkernel-boot.mk b/buildroot-external/package/hardkernel-boot/hardkernel-boot.mk index edd0f443d..2ff218e7a 100644 --- a/buildroot-external/package/hardkernel-boot/hardkernel-boot.mk +++ b/buildroot-external/package/hardkernel-boot/hardkernel-boot.mk @@ -4,7 +4,6 @@ # ################################################################################ - HARDKERNEL_BOOT_SOURCE = $(HARDKERNEL_BOOT_VERSION).tar.gz HARDKERNEL_BOOT_SITE = https://github.com/hardkernel/u-boot/archive HARDKERNEL_BOOT_LICENSE = GPL-2.0+ @@ -20,14 +19,16 @@ HARDKERNEL_BOOT_BINS += sd_fuse/bl1.bin.hardkernel \ u-boot.gxbb define HARDKERNEL_BOOT_BUILD_CMDS $(@D)/fip/fip_create --bl30 $(@D)/fip/gxb/bl30.bin \ - --bl301 $(@D)/fip/gxb/bl301.bin \ - --bl31 $(@D)/fip/gxb/bl31.bin \ - --bl33 $(BINARIES_DIR)/u-boot.bin \ - $(@D)/fip.bin + --bl301 $(@D)/fip/gxb/bl301.bin \ + --bl31 $(@D)/fip/gxb/bl31.bin \ + --bl33 $(BINARIES_DIR)/u-boot.bin \ + $(@D)/fip.bin + cat $(@D)/fip/gxb/bl2.package $(@D)/fip.bin > $(@D)/boot_new.bin $(@D)/fip/gxb/aml_encrypt_gxb --bootsig \ - --input $(@D)/boot_new.bin \ - --output $(@D)/u-boot.img + --input $(@D)/boot_new.bin \ + --output $(@D)/u-boot.img + dd if=$(@D)/u-boot.img of=$(@D)/u-boot.gxbb bs=512 skip=96 endef @@ -39,6 +40,54 @@ HARDKERNEL_BOOT_BINS += sd_fuse/bl1.bin.hardkernel \ sd_fuse/tzsw.bin.hardkernel define HARDKERNEL_BOOT_BUILD_CMDS endef + +else ifeq ($(BR2_PACKAGE_HARDKERNEL_BOOT_ODROID_N2),y) +HARDKERNEL_BOOT_VERSION = c989da31a5c1da3ab57d7c6dc5a3fdbcc1c3eed7 + +HARDKERNEL_BOOT_BINS += u-boot.g12b +define HARDKERNEL_BOOT_BUILD_CMDS + curl -L -o $(@D)/fip/blx_fix.sh https://raw.githubusercontent.com/home-assistant/hassos-blobs/d271a9c4aedf740e4fa716c3cb7faee93257e968/odroid-n2/blx_fix_g12a.sh + curl -L -o $(@D)/fip/acs.bin https://raw.githubusercontent.com/home-assistant/hassos-blobs/d271a9c4aedf740e4fa716c3cb7faee93257e968/odroid-n2/acs.bin + curl -L -o $(@D)/fip/bl301.bin https://raw.githubusercontent.com/home-assistant/hassos-blobs/d271a9c4aedf740e4fa716c3cb7faee93257e968/odroid-n2/bl301.bin + + bash $(@D)/fip/blx_fix.sh \ + $(@D)/fip/g12b/bl30.bin $(@D)/fip/zero_tmp $(@D)/fip/bl30_zero.bin \ + $(@D)/fip/bl301.bin $(@D)/fip/bl301_zero.bin $(@D)/fip/bl30_new.bin \ + bl30 + + bash $(@D)/fip/blx_fix.sh \ + $(@D)/fip/g12b/bl2.bin $(@D)/fip/zero_tmp $(@D)/fip/bl2_zero.bin \ + $(@D)/fip/acs.bin $(@D)/fip/bl21_zero.bin $(@D)/fip/bl2_new.bin \ + bl2 + + $(@D)/fip/g12b/aml_encrypt_g12b --bl30sig --input $(@D)/fip/bl30_new.bin \ + --output $(@D)/fip/bl30_new.bin.g12.enc \ + --level v3 + $(@D)/fip/g12b/aml_encrypt_g12b --bl3sig --input $(@D)/fip/bl30_new.bin.g12.enc \ + --output $(@D)/fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $(@D)/fip/g12b/aml_encrypt_g12b --bl3sig --input $(@D)/fip/g12b/bl31.img \ + --output $(@D)/fip/bl31.img.enc \ + --level v3 --type bl31 + $(@D)/fip/g12b/aml_encrypt_g12b --bl3sig --input $(BINARIES_DIR)/u-boot.bin \ + --output $(@D)/fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $(@D)/fip/g12b/aml_encrypt_g12b --bl2sig --input $(@D)/fip/bl2_new.bin \ + --output $(@D)/fip/bl2.n.bin.sig + $(@D)/fip/g12b/aml_encrypt_g12b --bootmk \ + --output $(@D)/fip/u-boot.bin \ + --bl2 $(@D)/fip/bl2.n.bin.sig \ + --bl30 $(@D)/fip/bl30_new.bin.enc \ + --bl31 $(@D)/fip/bl31.img.enc \ + --bl33 $(@D)/fip/bl33.bin.enc \ + --ddrfw1 $(@D)/fip/g12b/ddr4_1d.fw \ + --ddrfw2 $(@D)/fip/g12b/ddr4_2d.fw \ + --ddrfw4 $(@D)/fip/g12b/piei.fw \ + --ddrfw8 $(@D)/fip/g12b/aml_ddr.fw \ + --level v3 + + cp $(@D)/fip/u-boot.bin $(@D)/u-boot.g12b +endef endif define HARDKERNEL_BOOT_INSTALL_IMAGES_CMDS diff --git a/buildroot-external/package/qemu-guest-agent/Config.in b/buildroot-external/package/qemu-guest-agent/Config.in new file mode 100644 index 000000000..8ec346511 --- /dev/null +++ b/buildroot-external/package/qemu-guest-agent/Config.in @@ -0,0 +1,9 @@ +config BR2_PACKAGE_QEMU_GUEST_AGENT + depends on BR2_USE_MMU # libglib2 + depends on BR2_USE_WCHAR # libglib2 + depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2 + select BR2_PACKAGE_LIBGLIB2 + select BR2_PACKAGE_ZLIB + bool "QEMU Guest Agent" + help + QEMU guest agent for qemu based virtualisations \ No newline at end of file diff --git a/buildroot-external/package/qemu-guest-agent/qemu-guest-agent.mk b/buildroot-external/package/qemu-guest-agent/qemu-guest-agent.mk new file mode 100644 index 000000000..713ce9605 --- /dev/null +++ b/buildroot-external/package/qemu-guest-agent/qemu-guest-agent.mk @@ -0,0 +1,110 @@ +################################################################################ +# +# qemu-guest-agent +# +################################################################################ + +QEMU_GUEST_AGENT_VERSION = 3.1.1.1 +QEMU_GUEST_AGENT_SOURCE = qemu-$(QEMU_GUEST_AGENT_VERSION).tar.xz +QEMU_GUEST_AGENT_SITE = http://download.qemu.org +QEMU_GUEST_AGENT_LICENSE = GPL-2.0, LGPL-2.1, MIT, BSD-3-Clause, BSD-2-Clause, Others/BSD-1c +QEMU_GUEST_AGENT_LICENSE_FILES = COPYING COPYING.LIB +# NOTE: there is no top-level license file for non-(L)GPL licenses; +# the non-(L)GPL license texts are specified in the affected +# individual source files. + +QEMU_GUEST_AGENT_DEPENDENCIES = host-pkgconf libglib2 zlib + +# Need the LIBS variable because librt and libm are +# not automatically pulled. :-( +QEMU_GUEST_AGENT_LIBS = -lrt -lm + +QEMU_GUEST_AGENT_VARS = LIBTOOL=$(HOST_DIR)/bin/libtool + +QEMU_GUEST_AGENT_OPTS = --enable-guest-agent + +# Override CPP, as it expects to be able to call it like it'd +# call the compiler. +define QEMU_GUEST_AGENT_CONFIGURE_CMDS + ( cd $(@D); \ + LIBS='$(QEMU_GUEST_AGENT_LIBS)' \ + $(TARGET_CONFIGURE_OPTS) \ + $(TARGET_CONFIGURE_ARGS) \ + CPP="$(TARGET_CC) -E" \ + $(QEMU_GUEST_AGENT_VARS) \ + ./configure \ + --prefix=/usr \ + --localstatedir=/var \ + --cross-prefix=$(TARGET_CROSS) \ + --audio-drv-list= \ + --disable-kvm \ + --disable-linux-user \ + --disable-linux-aio \ + --disable-xen \ + --disable-docs \ + --disable-curl \ + --disable-gnutls \ + --disable-gtk \ + --disable-vte \ + --disable-vnc-jpeg \ + --disable-opengl \ + --disable-usb-redir \ + --disable-sdl \ + --disable-system \ + --disable-user \ + --disable-guest-agent \ + --disable-nettle \ + --disable-gcrypt \ + --disable-curses \ + --disable-vnc \ + --disable-virtfs \ + --disable-brlapi \ + --disable-fdt \ + --disable-bluez \ + --disable-kvm \ + --disable-rdma \ + --disable-vde \ + --disable-netmap \ + --disable-cap-ng \ + --disable-attr \ + --disable-vhost-net \ + --disable-spice \ + --disable-rbd \ + --disable-libiscsi \ + --disable-libnfs \ + --disable-smartcard \ + --disable-libusb \ + --disable-usb-redir \ + --disable-lzo \ + --disable-snappy \ + --disable-bzip2 \ + --disable-seccomp \ + --disable-coroutine-pool \ + --disable-glusterfs \ + --disable-tpm \ + --disable-numa \ + --disable-blobs \ + --disable-capstone \ + --disable-tools \ + --disable-tcg-interpreter \ + $(QEMU_GUEST_AGENT_OPTS) \ + ) +endef + +define QEMU_GUEST_AGENT_BUILD_CMDS + $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) +endef + +define QEMU_GUEST_AGENT_INSTALL_TARGET_CMDS + $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(QEMU_GUEST_AGENT_MAKE_ENV) DESTDIR=$(TARGET_DIR) install +endef + +define QEMU_GUEST_AGENT_INSTALL_INIT_SYSTEMD + $(INSTALL) -D -m 644 $(QEMU_GUEST_AGENT_PKGDIR)/qemu-guest.service \ + $(TARGET_DIR)/usr/lib/systemd/system/qemu-guest.service + $(INSTALL) -d $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants + ln -fs ../../../../usr/lib/systemd/system/qemu-guest.service \ + $(TARGET_DIR)/etc/systemd/system/multi-user.target.wants/qemu-guest.service +endef + +$(eval $(generic-package)) diff --git a/buildroot-external/package/qemu-guest-agent/qemu-guest.service b/buildroot-external/package/qemu-guest-agent/qemu-guest.service new file mode 100644 index 000000000..7888dcb4f --- /dev/null +++ b/buildroot-external/package/qemu-guest-agent/qemu-guest.service @@ -0,0 +1,11 @@ +[Unit] +Description=QEMU Guest Agent +After=syslog.target network.target +ConditionVirtualization=kvm + +[Service] +ExecStart=/usr/bin/qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 +Restart=on-failure + +[Install] +WantedBy=multi-user.target diff --git a/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/failure.conf b/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/failure.conf new file mode 100644 index 000000000..128fbd509 --- /dev/null +++ b/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/failure.conf @@ -0,0 +1,2 @@ +[Unit] +FailureAction=reboot diff --git a/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/resource.conf b/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/resource.conf new file mode 100644 index 000000000..0d7b1e5f9 --- /dev/null +++ b/buildroot-external/rootfs-overlay/etc/systemd/system/docker.service.d/resource.conf @@ -0,0 +1,2 @@ +[Service] +TasksMax=infinity \ No newline at end of file diff --git a/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-mark.timer b/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-mark.timer deleted file mode 120000 index bbdfaf738..000000000 --- a/buildroot-external/rootfs-overlay/etc/systemd/system/timers.target.wants/rauc-mark.timer +++ /dev/null @@ -1 +0,0 @@ -/usr/lib/systemd/system/rauc-mark.timer \ No newline at end of file diff --git a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.service b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.service deleted file mode 100644 index 1c22ee576..000000000 --- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.service +++ /dev/null @@ -1,9 +0,0 @@ -[Unit] -Description=HassOS rauc good -RefuseManualStart=true -RefuseManualStop=true - -[Service] -Type=oneshot -ExecStart=/usr/libexec/hassos-rate -RemainAfterExit=true diff --git a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.timer b/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.timer deleted file mode 100644 index fa79b78fd..000000000 --- a/buildroot-external/rootfs-overlay/usr/lib/systemd/system/rauc-mark.timer +++ /dev/null @@ -1,8 +0,0 @@ -[Unit] -Description=HassOS mark boot partition as good - -[Timer] -OnBootSec=1min - -[Install] -WantedBy=timers.target diff --git a/buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/hmip-rfusb.rules b/buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/99-hmip-rfusb.rules similarity index 100% rename from buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/hmip-rfusb.rules rename to buildroot-external/rootfs-overlay/usr/lib/udev/rules.d/99-hmip-rfusb.rules diff --git a/buildroot-external/rootfs-overlay/usr/libexec/hassos-expand b/buildroot-external/rootfs-overlay/usr/libexec/hassos-expand index 341308bbd..64554e18b 100755 --- a/buildroot-external/rootfs-overlay/usr/libexec/hassos-expand +++ b/buildroot-external/rootfs-overlay/usr/libexec/hassos-expand @@ -6,28 +6,20 @@ DEVICE_CHILD="$(findfs LABEL="hassos-data")" DEVICE_ROOT="/dev/$(lsblk -no pkname "${DEVICE_CHILD}")" PART_NUM="${DEVICE_CHILD: -1}" +# Need resize +UNUSED=$(sfdisk -Fq "${DEVICE_ROOT}" | cut -d " " -f 3 | tail -1) +if [ -z "${UNUSED}" ] || [ "${UNUSED}" -le "2048" ]; then + echo "[INFO] No resize of data partition needed" + exit 0 +fi + if sfdisk -dq "${DEVICE_ROOT}" | grep -q 'label: gpt'; then - - # Need resize - if [ "$(sgdisk -E "${DEVICE_ROOT}")" -le "2048" ]; then - echo "[INFO] No resize of data partition needed" - exit 0 - fi - # Resize & Reload partition echo "[INFO] Update hassos-data partition ${PART_NUM}" sgdisk -e "${DEVICE_ROOT}" sgdisk -d "${PART_NUM}" -n "${PART_NUM}:0:0" -c "${PART_NUM}:hassos-data" -t "${PART_NUM}:0FC63DAF-8483-4772-8E79-3D69D8477DE4" -u "${PART_NUM}:a52a4597-fa3a-4851-aefd-2fbe9f849079" "${DEVICE_ROOT}" sgdisk -v "${DEVICE_ROOT}" else - - # Need resize - UNUSED=$(sfdisk -Fq "${DEVICE_ROOT}" | cut -d " " -f 3 | tail -1) - if [ -z "${UNUSED}" ] || [ "${UNUSED}" -le "2048" ]; then - echo "[INFO] No resize of data partition needed" - exit 0 - fi - echo ", +" | sfdisk -N "${PART_NUM}" "${DEVICE_ROOT}" --force sfdisk -V "${DEVICE_ROOT}" fi diff --git a/buildroot-external/rootfs-overlay/usr/libexec/hassos-rate b/buildroot-external/rootfs-overlay/usr/libexec/hassos-rate deleted file mode 100755 index 942e6d58d..000000000 --- a/buildroot-external/rootfs-overlay/usr/libexec/hassos-rate +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh -# shellcheck disable=SC2112 -set -e - - -function mark_good() { - rauc status mark-good - exit 0 -} - -function mark_bad() { - rauc status mark-bad - systemctl reboot -} - -#### Check system #### - -# Docker state -if systemctl -q is-failed docker; then - mark_bad -fi - -# Docker state -if systemctl -q is-failed hassos-supervisor; then - mark_bad -fi - -mark_good diff --git a/buildroot-patches/0001-Docker-AppArmor-support.patch b/buildroot-patches/0001-Docker-AppArmor-support.patch new file mode 100644 index 000000000..6bb90865a --- /dev/null +++ b/buildroot-patches/0001-Docker-AppArmor-support.patch @@ -0,0 +1,53 @@ +From a874e0babaeefacd8e3d04a9c056dd6f1121307d Mon Sep 17 00:00:00 2001 +From: Pascal Vizeli +Date: Mon, 13 Jan 2020 12:27:06 +0000 +Subject: [PATCH 1/1] Docker: AppArmor support + +Signed-off-by: Pascal Vizeli +--- + package/docker-containerd/docker-containerd.mk | 1 + + package/docker-engine/docker-engine.mk | 2 +- + package/runc/runc.mk | 2 +- + 3 files changed, 3 insertions(+), 2 deletions(-) + +diff --git a/package/docker-containerd/docker-containerd.mk b/package/docker-containerd/docker-containerd.mk +index 69068e44f8..4dc0ef4672 100644 +--- a/package/docker-containerd/docker-containerd.mk ++++ b/package/docker-containerd/docker-containerd.mk +@@ -17,6 +17,7 @@ DOCKER_CONTAINERD_LDFLAGS = \ + DOCKER_CONTAINERD_BUILD_TARGETS = cmd/ctr cmd/containerd cmd/containerd-shim + + DOCKER_CONTAINERD_INSTALL_BINS = containerd containerd-shim ++DOCKER_CONTAINERD_TAGS = apparmor + + ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) + DOCKER_CONTAINERD_DEPENDENCIES += libseccomp host-pkgconf +diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk +index 24022f7107..14673f3183 100644 +--- a/package/docker-engine/docker-engine.mk ++++ b/package/docker-engine/docker-engine.mk +@@ -17,7 +17,7 @@ DOCKER_ENGINE_LDFLAGS = \ + -X main.GitCommit=$(DOCKER_ENGINE_VERSION) \ + -X main.Version=$(DOCKER_ENGINE_VERSION) + +-DOCKER_ENGINE_TAGS = cgo exclude_graphdriver_zfs autogen ++DOCKER_ENGINE_TAGS = cgo exclude_graphdriver_zfs autogen apparmor + DOCKER_ENGINE_BUILD_TARGETS = cmd/dockerd + + ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) +diff --git a/package/runc/runc.mk b/package/runc/runc.mk +index acf61ab160..3432dd5fe0 100644 +--- a/package/runc/runc.mk ++++ b/package/runc/runc.mk +@@ -13,7 +13,7 @@ RUNC_WORKSPACE = Godeps/_workspace + + RUNC_LDFLAGS = -X main.gitCommit=$(RUNC_VERSION) + +-RUNC_TAGS = cgo static_build ++RUNC_TAGS = cgo static_build apparmor + + ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) + RUNC_TAGS += seccomp +-- +2.17.1 + diff --git a/buildroot-patches/0001-docker-containerd-bump-to-v1.2.7.patch b/buildroot-patches/0001-docker-containerd-bump-to-v1.2.7.patch deleted file mode 100644 index afd6d33bd..000000000 --- a/buildroot-patches/0001-docker-containerd-bump-to-v1.2.7.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 9759621540997500a9dc0163506a8eac1e4769cc Mon Sep 17 00:00:00 2001 -From: Pascal Vizeli -Date: Wed, 26 Jun 2019 09:57:05 +0000 -Subject: [PATCH 1/1] docker-containerd: bump to v1.2.7 - -Signed-off-by: Pascal Vizeli ---- - package/docker-containerd/docker-containerd.hash | 2 +- - package/docker-containerd/docker-containerd.mk | 3 ++- - 2 files changed, 3 insertions(+), 2 deletions(-) - -diff --git a/package/docker-containerd/docker-containerd.hash b/package/docker-containerd/docker-containerd.hash -index 525191c651..163a519d36 100644 ---- a/package/docker-containerd/docker-containerd.hash -+++ b/package/docker-containerd/docker-containerd.hash -@@ -1,3 +1,3 @@ - # Computed locally --sha256 f2d578b743fb9faa5b3477b7cf4b33d00501087043a53b27754f14bbe741f891 docker-containerd-v1.2.6.tar.gz -+sha256 7179c709a0d187708a1eeddcbdecd7206b2c642dc4413bcdb049cd6b38d06801 docker-containerd-v1.2.7.tar.gz - sha256 4bbe3b885e8cd1907ab4cf9a41e862e74e24b5422297a4f2fe524e6a30ada2b4 LICENSE -diff --git a/package/docker-containerd/docker-containerd.mk b/package/docker-containerd/docker-containerd.mk -index c67b36e7dc..4c0877ecd1 100644 ---- a/package/docker-containerd/docker-containerd.mk -+++ b/package/docker-containerd/docker-containerd.mk -@@ -4,7 +4,7 @@ - # - ################################################################################ - --DOCKER_CONTAINERD_VERSION = v1.2.6 -+DOCKER_CONTAINERD_VERSION = v1.2.7 - DOCKER_CONTAINERD_SITE = $(call github,containerd,containerd,$(DOCKER_CONTAINERD_VERSION)) - DOCKER_CONTAINERD_LICENSE = Apache-2.0 - DOCKER_CONTAINERD_LICENSE_FILES = LICENSE -@@ -17,6 +17,7 @@ DOCKER_CONTAINERD_LDFLAGS = \ - DOCKER_CONTAINERD_BUILD_TARGETS = cmd/ctr cmd/containerd cmd/containerd-shim - - DOCKER_CONTAINERD_INSTALL_BINS = containerd containerd-shim -+DOCKER_CONTAINERD_TAGS = apparmor - - ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) - DOCKER_CONTAINERD_DEPENDENCIES += libseccomp host-pkgconf --- -2.17.1 - diff --git a/buildroot-patches/0002-Docker-tini-static.patch b/buildroot-patches/0002-Docker-tini-static.patch new file mode 100644 index 000000000..32815ddfb --- /dev/null +++ b/buildroot-patches/0002-Docker-tini-static.patch @@ -0,0 +1,41 @@ +From 81bf3979ac5aec0dd8d4bccc690fe1bcef5de139 Mon Sep 17 00:00:00 2001 +From: Pascal Vizeli +Date: Mon, 13 Jan 2020 12:30:48 +0000 +Subject: [PATCH 1/1] Docker: tini & static + +Signed-off-by: Pascal Vizeli +--- + package/docker-engine/docker-engine.mk | 6 ++++++ + package/tini/tini.mk | 1 + + 2 files changed, 7 insertions(+) + +diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk +index 14673f3183..b0eaae9580 100644 +--- a/package/docker-engine/docker-engine.mk ++++ b/package/docker-engine/docker-engine.mk +@@ -82,4 +82,10 @@ define DOCKER_ENGINE_USERS + - - docker -1 * - - - Docker Application Container Framework + endef + ++define DOCKER_ENGINE_INSTALL_SYMLINKS ++ ln -fs tini $(TARGET_DIR)/usr/bin/docker-init ++endef ++ ++DOCKER_ENGINE_POST_INSTALL_TARGET_HOOKS += DOCKER_ENGINE_INSTALL_SYMLINKS ++ + $(eval $(golang-package)) +diff --git a/package/tini/tini.mk b/package/tini/tini.mk +index 132bfc99dd..b6d7d80b22 100644 +--- a/package/tini/tini.mk ++++ b/package/tini/tini.mk +@@ -12,6 +12,7 @@ TINI_LICENSE_FILES = LICENSE + TINI_CFLAGS = $(TARGET_CFLAGS) \ + -DTINI_VERSION=\"$(TINI_VERSION)\" \ + -DTINI_GIT=\"\" ++TINI_CFLAGS += -static + + ifeq ($(BR2_PACKAGE_TINI_MINIMAL),y) + TINI_CFLAGS += -DTINI_MINIMAL +-- +2.17.1 + diff --git a/buildroot-patches/0002-runc-add-AppArmor.patch b/buildroot-patches/0002-runc-add-AppArmor.patch deleted file mode 100644 index 56af8933c..000000000 --- a/buildroot-patches/0002-runc-add-AppArmor.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 021395083b5829c4fd00bebcdc7d38c2acd7232d Mon Sep 17 00:00:00 2001 -From: Pascal Vizeli -Date: Wed, 26 Jun 2019 10:00:31 +0000 -Subject: [PATCH 1/1] runc: add AppArmor - -Signed-off-by: Pascal Vizeli ---- - package/runc/runc.mk | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/package/runc/runc.mk b/package/runc/runc.mk -index 55097e5a17..31da4fae58 100644 ---- a/package/runc/runc.mk -+++ b/package/runc/runc.mk -@@ -13,7 +13,7 @@ RUNC_WORKSPACE = Godeps/_workspace - - RUNC_LDFLAGS = -X main.gitCommit=$(RUNC_VERSION) - --RUNC_TAGS = cgo static_build -+RUNC_TAGS = cgo static_build apparmor - - ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) - RUNC_TAGS += seccomp --- -2.17.1 - diff --git a/buildroot-patches/0003-docker-engine-add-AppArmor-support.patch b/buildroot-patches/0003-docker-engine-add-AppArmor-support.patch deleted file mode 100644 index 98334cdce..000000000 --- a/buildroot-patches/0003-docker-engine-add-AppArmor-support.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 93c43e8572d374edbea8521f63c071a0a5cb1098 Mon Sep 17 00:00:00 2001 -From: Pascal Vizeli -Date: Thu, 3 Jan 2019 19:54:57 +0000 -Subject: [PATCH 1/1] docker-engine: add AppArmor support - -Signed-off-by: Pascal Vizeli ---- - package/docker-engine/docker-engine.mk | 8 +++++++- - 1 file changed, 7 insertions(+), 1 deletion(-) - -diff --git a/package/docker-engine/docker-engine.mk b/package/docker-engine/docker-engine.mk -index f19c1d9..9ecfd10 100644 ---- a/package/docker-engine/docker-engine.mk -+++ b/package/docker-engine/docker-engine.mk -@@ -17,7 +17,7 @@ DOCKER_ENGINE_LDFLAGS = \ - -X main.GitCommit=$(DOCKER_ENGINE_VERSION) \ - -X main.Version=$(DOCKER_ENGINE_VERSION) - --DOCKER_ENGINE_TAGS = cgo exclude_graphdriver_zfs autogen -+DOCKER_ENGINE_TAGS = cgo exclude_graphdriver_zfs autogen apparmor - DOCKER_ENGINE_BUILD_TARGETS = cmd/dockerd - - ifeq ($(BR2_PACKAGE_LIBSECCOMP),y) -@@ -77,4 +77,10 @@ define DOCKER_ENGINE_USERS - - - docker -1 * - - - Docker Application Container Framework - endef - -+define DOCKER_ENGINE_INSTALL_SYMLINKS -+ ln -fs tini $(TARGET_DIR)/usr/bin/docker-init -+endef -+ -+DOCKER_ENGINE_POST_INSTALL_TARGET_HOOKS += DOCKER_ENGINE_INSTALL_SYMLINKS -+ - $(eval $(golang-package)) --- -2.17.1 - diff --git a/buildroot-patches/0004-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch b/buildroot-patches/0003-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch similarity index 94% rename from buildroot-patches/0004-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch rename to buildroot-patches/0003-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch index cdcadaccc..4ee785dbd 100644 --- a/buildroot-patches/0004-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch +++ b/buildroot-patches/0003-rpi-firmware-Bump-firmware-for-kernel-4.19-RPi4.patch @@ -38,7 +38,7 @@ index 9988dda717..3eae7e270b 100644 @@ -1,2 +1,2 @@ # Locally computed -sha256 f1d631920ed4ae15f368ba7b8b3caa4ed604f5223372cc6debbd39a101eb8d74 rpi-firmware-81cca1a9380c828299e884dba5efd0d4acb39e8d.tar.gz -+sha256 25d5cdeb0cf37499f8b6ca85c43a5ccaa0be55c9c33a97ceac7ba93954f890c2 rpi-firmware-0b0ec99a776f30c5b9f80e5447e9e8fecb80f71a.tar.gz ++sha256 088d094618924a90f65bb511808bbeb921e0769c878fa7baa9626954206f61a2 rpi-firmware-62a0d75b67484cb306a2a6f8fa954d9644868169.tar.gz diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index 630bc670ca..fd2970333e 100644 --- a/package/rpi-firmware/rpi-firmware.mk @@ -48,7 +48,7 @@ index 630bc670ca..fd2970333e 100644 ################################################################################ -RPI_FIRMWARE_VERSION = 81cca1a9380c828299e884dba5efd0d4acb39e8d -+RPI_FIRMWARE_VERSION = 0b0ec99a776f30c5b9f80e5447e9e8fecb80f71a ++RPI_FIRMWARE_VERSION = 62a0d75b67484cb306a2a6f8fa954d9644868169 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION)) RPI_FIRMWARE_LICENSE = BSD-3-Clause RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom diff --git a/buildroot-patches/0005-network-manager-Bump-version-1.16.2.patch b/buildroot-patches/0004-network-manager-Bump-version-1.16.2.patch similarity index 100% rename from buildroot-patches/0005-network-manager-Bump-version-1.16.2.patch rename to buildroot-patches/0004-network-manager-Bump-version-1.16.2.patch diff --git a/buildroot-patches/0006-Fix-dhcp-client.patch b/buildroot-patches/0005-Fix-dhcp-client.patch similarity index 100% rename from buildroot-patches/0006-Fix-dhcp-client.patch rename to buildroot-patches/0005-Fix-dhcp-client.patch diff --git a/buildroot-patches/0007-rpi-use-latest-wifi-driver.patch b/buildroot-patches/0006-rpi-use-latest-wifi-driver.patch similarity index 90% rename from buildroot-patches/0007-rpi-use-latest-wifi-driver.patch rename to buildroot-patches/0006-rpi-use-latest-wifi-driver.patch index a178305f1..0e57429b8 100644 --- a/buildroot-patches/0007-rpi-use-latest-wifi-driver.patch +++ b/buildroot-patches/0006-rpi-use-latest-wifi-driver.patch @@ -16,7 +16,7 @@ index c61a47e..84e02f3 100644 @@ -1,3 +1,3 @@ # Locally calculated -sha256 155ebd5f08b819e0ce4e1950fcc972b2086cee3c16d36aba348beba1910c1fd2 rpi-wifi-firmware-8c1e2bff1da9850f68efcfff3da5d939ec27a2ee.tar.gz -+sha256 0b2bbf0bcdb7eabc488cc96e418ee17efcd9803590abc64d055ea3b762e2411b rpi-wifi-firmware-130cb86fa30cafbd575d38865fa546350d4c5f9c.tar.gz ++sha256 26e6e4aace9c9d1e9b9b1447f57ebd743dc15f3a337deac9e77d964885fcb3b3 rpi-wifi-firmware-00daf85ffa373ecce7836df7543c6ebe4cf43639.tar.gz sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d LICENCE.broadcom_bcm43xx diff --git a/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/package/rpi-wifi-firmware/rpi-wifi-firmware.mk index 2eb8cee..da915bd 100644 @@ -28,7 +28,7 @@ index 2eb8cee..da915bd 100644 -RPI_WIFI_FIRMWARE_VERSION = 8c1e2bff1da9850f68efcfff3da5d939ec27a2ee -RPI_WIFI_FIRMWARE_SITE = $(call github,LibreELEC,brcmfmac_sdio-firmware-rpi,$(RPI_WIFI_FIRMWARE_VERSION)) -+RPI_WIFI_FIRMWARE_VERSION = 130cb86fa30cafbd575d38865fa546350d4c5f9c ++RPI_WIFI_FIRMWARE_VERSION = 00daf85ffa373ecce7836df7543c6ebe4cf43639 +RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION)) RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx diff --git a/buildroot-patches/0010-odroid-ux4-firmware.patch b/buildroot-patches/0007-odroid-ux4-firmware.patch similarity index 65% rename from buildroot-patches/0010-odroid-ux4-firmware.patch rename to buildroot-patches/0007-odroid-ux4-firmware.patch index ecbfab213..b1705efaa 100644 --- a/buildroot-patches/0010-odroid-ux4-firmware.patch +++ b/buildroot-patches/0007-odroid-ux4-firmware.patch @@ -1,7 +1,7 @@ -diff --git a/buildroot/package/linux-firmware/Config.in b/buildroot/package/linux-firmware/Config.in +diff --git a/package/linux-firmware/Config.in b/package/linux-firmware/Config.in index 6b182dc6..8e3be238 100644 ---- a/buildroot/package/linux-firmware/Config.in -+++ b/buildroot/package/linux-firmware/Config.in +--- a/package/linux-firmware/Config.in ++++ b/package/linux-firmware/Config.in @@ -44,6 +44,12 @@ config BR2_PACKAGE_LINUX_FIRMWARE_QCOM_ADRENO help Firmware files for Qualcomm Adreno GPU firmware @@ -15,10 +15,10 @@ index 6b182dc6..8e3be238 100644 endmenu # Video menu "Bluetooth firmware" -diff --git a/buildroot/package/linux-firmware/linux-firmware.mk b/buildroot/package/linux-firmware/linux-firmware.mk +diff --git a/package/linux-firmware/linux-firmware.mk b/package/linux-firmware/linux-firmware.mk index 86e1d1e7..6453c402 100644 ---- a/buildroot/package/linux-firmware/linux-firmware.mk -+++ b/buildroot/package/linux-firmware/linux-firmware.mk +--- a/package/linux-firmware/linux-firmware.mk ++++ b/package/linux-firmware/linux-firmware.mk @@ -39,6 +39,12 @@ LINUX_FIRMWARE_FILES += qcom/a* LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.qcom qcom/NOTICE.txt endif diff --git a/buildroot-patches/0008-Add-kernel-5.4.patch b/buildroot-patches/0008-Add-kernel-5.4.patch new file mode 100644 index 000000000..9d80de044 --- /dev/null +++ b/buildroot-patches/0008-Add-kernel-5.4.patch @@ -0,0 +1,65 @@ +From beadf75fe1bb7257d8d3be95c6d415a39f48f89e Mon Sep 17 00:00:00 2001 +From: Pascal Vizeli +Date: Mon, 30 Dec 2019 11:21:02 +0000 +Subject: [PATCH 1/1] Add kernel 5.4 + +Signed-off-by: Pascal Vizeli +--- + package/linux-headers/Config.in.host | 4 ++++ + toolchain/Config.in | 5 +++++ + .../toolchain-external-custom/Config.in.options | 4 ++++ + 3 files changed, 13 insertions(+) + +diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host +index ff5959ac47..074aee0cb4 100644 +--- a/package/linux-headers/Config.in.host ++++ b/package/linux-headers/Config.in.host +@@ -116,6 +116,10 @@ choice + This is used to hide/show some packages that have strict + requirements on the version of kernel headers. + ++config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4 ++ bool "5.4.x" ++ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 ++ + config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_20 + bool "4.20.x" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20 +diff --git a/toolchain/Config.in b/toolchain/Config.in +index 87d7bc30bb..9d566cbf72 100644 +--- a/toolchain/Config.in ++++ b/toolchain/Config.in +@@ -398,10 +398,15 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20 + bool + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_19 + ++config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 ++ bool ++ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20 ++ + # This order guarantees that the highest version is set, as kconfig + # stops affecting a value on the first matching default. + config BR2_TOOLCHAIN_HEADERS_AT_LEAST + string ++ default "5.4" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 + default "4.20" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20 + default "4.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_19 + default "4.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_18 +diff --git a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +index 08a79ee4d9..81c48a11b4 100644 +--- a/toolchain/toolchain-external/toolchain-external-custom/Config.in.options ++++ b/toolchain/toolchain-external/toolchain-external-custom/Config.in.options +@@ -123,6 +123,10 @@ choice + m = ( LINUX_VERSION_CODE >> 8 ) & 0xFF + p = ( LINUX_VERSION_CODE >> 0 ) & 0xFF + ++config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_4 ++ bool "5.4.x" ++ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4 ++ + config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_20 + bool "4.20.x" + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20 +-- +2.17.1 + diff --git a/buildroot-patches/0008-tini-make-static-for-docker.patch b/buildroot-patches/0008-tini-make-static-for-docker.patch deleted file mode 100644 index dc5873b98..000000000 --- a/buildroot-patches/0008-tini-make-static-for-docker.patch +++ /dev/null @@ -1,25 +0,0 @@ -From e757b263a4f3ff67e69ae6cc6abdaa83039bf6b6 Mon Sep 17 00:00:00 2001 -From: Pascal Vizeli -Date: Tue, 27 Nov 2018 20:31:33 +0000 -Subject: [PATCH 1/1] tini: make static for docker - -Signed-off-by: Pascal Vizeli ---- - package/tini/tini.mk | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/package/tini/tini.mk b/package/tini/tini.mk -index 132bfc9..b6d7d80 100644 ---- a/package/tini/tini.mk -+++ b/package/tini/tini.mk -@@ -12,6 +12,7 @@ TINI_LICENSE_FILES = LICENSE - TINI_CFLAGS = $(TARGET_CFLAGS) \ - -DTINI_VERSION=\"$(TINI_VERSION)\" \ - -DTINI_GIT=\"\" -+TINI_CFLAGS += -static - - ifeq ($(BR2_PACKAGE_TINI_MINIMAL),y) - TINI_CFLAGS += -DTINI_MINIMAL --- -2.17.1 - diff --git a/buildroot-patches/0009-Bump-bluez-5.52.patch b/buildroot-patches/0009-Bump-bluez-5.52.patch new file mode 100644 index 000000000..81ef9ef31 --- /dev/null +++ b/buildroot-patches/0009-Bump-bluez-5.52.patch @@ -0,0 +1,51 @@ +From 4e3d6b2b4d600babb79492fbcd04d7bbd16a2a58 Mon Sep 17 00:00:00 2001 +From: Pascal Vizeli +Date: Mon, 30 Dec 2019 13:18:34 +0000 +Subject: [PATCH 1/1] Bump bluez 5.52 + +Signed-off-by: Pascal Vizeli +--- + package/bluez5_utils-headers/bluez5_utils-headers.mk | 2 +- + package/bluez5_utils/bluez5_utils.hash | 2 +- + package/bluez5_utils/bluez5_utils.mk | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/package/bluez5_utils-headers/bluez5_utils-headers.mk b/package/bluez5_utils-headers/bluez5_utils-headers.mk +index 020e8b4d4e..c61f93a23c 100644 +--- a/package/bluez5_utils-headers/bluez5_utils-headers.mk ++++ b/package/bluez5_utils-headers/bluez5_utils-headers.mk +@@ -5,7 +5,7 @@ + ################################################################################ + + # Keep the version and patches in sync with bluez5_utils +-BLUEZ5_UTILS_HEADERS_VERSION = 5.50 ++BLUEZ5_UTILS_HEADERS_VERSION = 5.52 + BLUEZ5_UTILS_HEADERS_SOURCE = bluez-$(BLUEZ5_UTILS_VERSION).tar.xz + BLUEZ5_UTILS_HEADERS_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth + BLUEZ5_UTILS_HEADERS_DL_SUBDIR = bluez5_utils +diff --git a/package/bluez5_utils/bluez5_utils.hash b/package/bluez5_utils/bluez5_utils.hash +index b965708559..00112bc0b6 100644 +--- a/package/bluez5_utils/bluez5_utils.hash ++++ b/package/bluez5_utils/bluez5_utils.hash +@@ -1,4 +1,4 @@ + # From https://www.kernel.org/pub/linux/bluetooth/sha256sums.asc: +-sha256 5ffcaae18bbb6155f1591be8c24898dc12f062075a40b538b745bfd477481911 bluez-5.50.tar.xz ++sha256 f7144ce2039202cfac18ccb52426efea11c98e4f6e1bb8041bcb994b8378560a bluez-5.52.tar.xz + sha256 b499eddebda05a8859e32b820a64577d91f1de2b52efa2a1575a2cb4000bc259 COPYING + sha256 ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5 COPYING.LIB +diff --git a/package/bluez5_utils/bluez5_utils.mk b/package/bluez5_utils/bluez5_utils.mk +index 15c9b670a7..7c5202b717 100644 +--- a/package/bluez5_utils/bluez5_utils.mk ++++ b/package/bluez5_utils/bluez5_utils.mk +@@ -5,7 +5,7 @@ + ################################################################################ + + # Keep the version and patches in sync with bluez5_utils-headers +-BLUEZ5_UTILS_VERSION = 5.50 ++BLUEZ5_UTILS_VERSION = 5.52 + BLUEZ5_UTILS_SOURCE = bluez-$(BLUEZ5_UTILS_VERSION).tar.xz + BLUEZ5_UTILS_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth + BLUEZ5_UTILS_INSTALL_STAGING = YES +-- +2.17.1 + diff --git a/buildroot-patches/0009-openvmtools-start-only-inside-a-vmware-env.patch b/buildroot-patches/0009-openvmtools-start-only-inside-a-vmware-env.patch deleted file mode 100644 index 83877f449..000000000 --- a/buildroot-patches/0009-openvmtools-start-only-inside-a-vmware-env.patch +++ /dev/null @@ -1,32 +0,0 @@ -From f80ba7397087960c033bc8ba43959e399aefb250 Mon Sep 17 00:00:00 2001 -From: Pascal Vizeli -Date: Wed, 26 Jun 2019 13:38:47 +0000 -Subject: [PATCH 1/1] openvmtools: start only inside a vmware env - -Signed-off-by: Pascal Vizeli ---- - package/openvmtools/vmtoolsd.service | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - -diff --git a/package/openvmtools/vmtoolsd.service b/package/openvmtools/vmtoolsd.service -index 17a4df44c2..1d2a3566cf 100644 ---- a/package/openvmtools/vmtoolsd.service -+++ b/package/openvmtools/vmtoolsd.service -@@ -1,11 +1,12 @@ - [Unit] - Description=vmtoolsd for openvmtools - After=syslog.target network.target -+ConditionVirtualization=vmware - - [Service] - Type=forking --PIDFile=/var/run/vmtoolsd.pid --ExecStart=/usr/bin/vmtoolsd -b /var/run/vmtoolsd.pid -+PIDFile=/run/vmtoolsd.pid -+ExecStart=/usr/bin/vmtoolsd -b /run/vmtoolsd.pid - Restart=on-failure - KillMode=process - KillSignal=SIGKILL --- -2.17.1 - diff --git a/buildroot-patches/0010-Bump-WireGuard-20191219.patch b/buildroot-patches/0010-Bump-WireGuard-20191219.patch new file mode 100644 index 000000000..4faf30c60 --- /dev/null +++ b/buildroot-patches/0010-Bump-WireGuard-20191219.patch @@ -0,0 +1,37 @@ +From 7da4f3e43f393ce09156cdb902bd879e2b6d7431 Mon Sep 17 00:00:00 2001 +From: Pascal Vizeli +Date: Mon, 30 Dec 2019 13:44:59 +0000 +Subject: [PATCH 1/1] Bump WireGuard 20191219 + +Signed-off-by: Pascal Vizeli +--- + package/wireguard/wireguard.hash | 2 +- + package/wireguard/wireguard.mk | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/package/wireguard/wireguard.hash b/package/wireguard/wireguard.hash +index 70558de720..8097aeb95b 100644 +--- a/package/wireguard/wireguard.hash ++++ b/package/wireguard/wireguard.hash +@@ -1,4 +1,4 @@ + # https://lists.zx2c4.com/pipermail/wireguard/2019-January/003805.html +-sha256 edd13c7631af169e3838621b1a1bff3ef73cf7bc778eec2bd55f7c1089ffdf9b WireGuard-0.0.20190123.tar.xz ++sha256 5aba6f0c38e97faa0b155623ba594bb0e4bd5e29deacd8d5ed8bda8d8283b0e7 WireGuard-0.0.20191219.tar.xz + # Locally calculated + sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING +diff --git a/package/wireguard/wireguard.mk b/package/wireguard/wireguard.mk +index 8d6cdb8e56..500c7dbd21 100644 +--- a/package/wireguard/wireguard.mk ++++ b/package/wireguard/wireguard.mk +@@ -4,7 +4,7 @@ + # + ################################################################################ + +-WIREGUARD_VERSION = 0.0.20190123 ++WIREGUARD_VERSION = 0.0.20191219 + WIREGUARD_SITE = https://git.zx2c4.com/WireGuard/snapshot + WIREGUARD_SOURCE = WireGuard-$(WIREGUARD_VERSION).tar.xz + WIREGUARD_LICENSE = GPL-2.0 +-- +2.17.1 + diff --git a/buildroot/CHANGES b/buildroot/CHANGES index e3d7ad3bf..a4d732bd2 100644 --- a/buildroot/CHANGES +++ b/buildroot/CHANGES @@ -1,3 +1,205 @@ +2019.02.9, released January 12th, 2020 + + Important / security related fixes. + + pkg-python infrastructure: Ensure correct compiler and linker + flags are used for compiled code + + utils/scanpypi: Remind users to update DEVELOPERS + + Updated/fixed packages: busybox, cc-tool, cpio, cups, dante, + dillo, docker-cli, docker-containerd, docker-engine, easy-rsa, + ecryptfs-utils, efl, git, glibc, gnupg2, gst1-plugins-bad, + kf5-kcoreaddons, libarchive, libgit2, libkrb5, librsvg, + libssh, libtomcrypt, libuio, lirc-tools, lvm2, + matchbox-desktop, nodejs, ntp, opencv3, openpowerlink, + python-django, python-ecdsa, python-pyasn-modules, + python-pyqt5, python-subprocess32, python3, qpdf, runc, rygel, + samba4, sdl2, wavpack, xserver_xorg-server, zip + + Issues resolved (http://bugs.uclibc.org): + + #12121: PyQt5.QtSerialPort and other modules not being built + +2019.02.8, released December 7th, 2019 + + Important / security related fixes. + + Infrastructure: Make HOST__DL_OPTS inherit from + _DL_OPTS by default, just like it is done for a number of + other package variables + + Add _KEEP_PY_FILES to exclude specific python .py files + from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for + the (rare) case where the .py files are needed at runtime + rather than .pyc. + + Fix -reconfigure handling for packages using the kconfig + infrastructure. + + Toolchain: ensure external toolchain kernel headers version + check correctly stop the build on mismatch + + Deconfigs: beaglebone: fix boot issue + + Updated/fixed packages: am33x-cm3, asterisk, bind, chrony, + clamav, collectd, connman, faifa, gob2, haproxy, + intel-microcode, ipsec-tools, jasper, jpeg-turbo, kodi, + kvm-unit-tests, libftdi, libftdi1, libnss, libstrophe, + libsvgtiny, lvm2, lzma, mariadb, minicom, neardal, nodejs, + opencv3, openvmtools, oracle-mysql, perl-gdgraph, + perl-gdtextutil, php, postgresql, prosody, python-django, + rabbitmq-c, rauc, redis, rpcbind, socat, spice, + spice-protocol, tftpd, tiff, webkitgtk + + New packages: libmspack + + Issues resolved (http://bugs.uclibc.org): + + #12166: Compiling nodejs for SAMA5D3 always crash with illegal inst.. + #12171: Python-opencv needs config.py and config-3.7.py to run.. + #12211: host-nodejs 10.15.3 package fail to build + #12316: tzdata fails to install with empty "default local time" + +2019.02.7, Released November 10th, 2019 + + Important / security related fixes. + + support/testing: use a kernel with HW_RANDOM_VIRTIO to work + around issues with lack of entrophy + + Toolchain: Also copy libssp.so for external toolchains if SSP + is enabled to handle toolchains providing SSP support in + libssp rather than in the C library + + Download: Also use the package download method for extra + downloads from the same site, so it does not get confused by + URLs containing '+' + + Fakeroot now works correctly under Microsoft Windows 10 + Services for Linux, which does not provide SYSV IPC support + + utils/test-pkg: ensure to exit with an error upon failure + + Updated/fixed packages: asterisk, azmq, cups-filters, + domoticz, duma, elf2flt, eudev, exfat, exfat-utils, fakeroot, + file, freerdp, gd, ghostscript, go, gvfs, intel-microcode, + kvm-unit-tests, libarchive, libnspr, libnss, libopenssl, + libpcap, libpciaccess, librsvg, libseccomp, libsigrok, + libtorrent, libunwind, linux-tools, lua-sdl2, lxc, minizip, + mjpegtools, mongoose, php, python, python-pysnmp-apps, + python3, qemu, qt5base, ruby, safeclib, samba4, sdl_mixer, + sox, sudo, systemd, tcpdump, unscd, util-lkinux, vtun, xvisor, + yaffs2utils + + Issues resolved (http://bugs.uclibc.org): + + #11366: [2018.08] SysV IPC not available for fakeroot on WSL + #12261: sudo versions prior to 1.8.28 are affected + +2019.02.6, Released October 3rd, 2019 + + Important / security related fixes. + + Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone: + Use default console settings + + Dependencies: Ensure host has JSON::PP perl module installed + if webkitgtk/wpewebkit packages are enabled as it is needed + during their build process. + + Toolchain: Generate check-headers program under BUILD_DIR + rather than /tmp to fix issues with distributions mounting + /tmp noexec. + + Updated/fixed packages: asterisk, augeas, bind, bwm-ng, cups, + cups-filters, docker-cli, docker-engine, docker-proxy, + dropbear, e2fsprogs, eudev, exim, expat, gcc, go, ifplugd, + haveged, iptables, joe, kf5-extra-cmake-modules, + kf5-modemmanager-qt, kf5-networkmanager-qt, libcurl, + libgcrypt, libgpg-error, libnftl, libnspr, libnss, libopenssl, + luksmeta, mariadb, mbedtls, mongodb, mosquitto, ncurses, + nfs-utils, nghttp2, nodejs, openvmtools, php, protobuf, putty, + qemu, qt5base, samba4, swupdate, systemd-bootchart, thttpd, + uclibc, unzip, util-linux, wireshark + + Issues resolved (http://bugs.uclibc.org): + + #10806: Allow nfs-utils to use ipv6 + #11781: mariadb build error + #12031: Build of cups-filters fails while linking, apparently due.. + #12141: eudev package is missing "render" and "kvm" groups + #12181: dropbear: norootlogin (-w) no longer works when PAM is enabled + #12241: Permission denied while running "make" + +2019.02.5, Released September 2nd, 2019 + + Important / security related fixes. + + Filesystems: Pass extra pax options to tar for binary + reproducibility. + + Updated/fixed packages: apache, arm-trusted-firmware, + asterisk, atk, autofs, batctl, batman-adv, berkeleydb, brotli, + busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk, + cryptopp, dahdi-linux, dahdi-tools, daq, dehydrated, dovecot, + dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib, + git, glib-networking, glibc, gnupg2, gnutls, go, + gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick, + imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl, + libgit2, libgtk3, libmodplug, libnss, libpri, libshout, + libss7, libssh2, libvips, libxcb, linux-headers, mdadm, + mesa3d, metacity, mpg123, mosquitto, musl, nginx, openblas, + opencv3, openldap, openvmtools, pcmanfm, php, pigpio, + postgresql, prboom, proftpd, proj, python, python-django, + python-idna, python-numpy, python-urllib3, python3, qemu, qt5, + qt5base, qt5enginio, quagga, rygel, squid, subversion, + tcpreplay, unzip, vlc, vte, webkitgtk, weston, wireless-regdb, + xen, xfont_font-util, xlib_libICE, xlib_libXfont, + xlib_libXfont2, yad, zeromq + + Issues resolved (http://bugs.uclibc.org): + + #11741: pigpio does not build host-pigpio + #11876: automount using host mount/umount + #11881: Build breaks with lftp package enabled and libexpat1-dev inst.. + #11921: dahdi fails to build + #11961: libpri build failure + #12096: tcpreplay: build fails if libdumbnet-dev is installed in the.. + #12106: daq: build fails if libdumbnet-dev is installed in the host + #12126: vc4 has neon as hard dependency + +2019.02.4, Released July 10th, 2019 + + Important / security related fixes. + + arch: x86: Fix typo breaking 'core-avx2' variant, add Westmere + variant. + + linux: Workaround -Werror related build failure on powerpc, + by forcing CONFIG_PPC_DISABLE_WERROR on. + + support/testing: Emulate a machine with 256MB RAM to fix + issues with certain tests running out of memory. + + test-pkg: Correct long option handling and clean output dir + after a successful build to save disk space. + + Ensure custom _OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS are + passed before the standard exclusions so they are not ignored + by rsync when using override-srcdir. + + Defconfigs: QEMU: use 'rootwait' kernel option to ensure root + partition is available before mounting. + + Updated/fixed packages: barebox, bzip2, davfs2, dbus, dialog, + docker-cli, docker-engine, expat, faad2, ffmpeg, freeswitch, + gerbera, haveged, irssi, libcdadio, libgit2, libglib2, + libsecret, libvncserver, lmbench, logrotate, mariadb, meson, + mongoose, monit, mpd, openblas, php, postgresql, psplash, + python, python-django, python3, qt5base, samba4, taglib, + tvheadend, vlc, webkitgtk, xserver_xorg-server, znc + 2019.02.3, Released June 7th, 2019 Important / security related fixes. @@ -26,6 +228,8 @@ sqlite, subversion, supertux, systemd, tslib, uclibc, v4l2loopback, webkitgtk, woff2 + Issues resolved (http://bugs.uclibc.org): + #11816: Only selected coreutils binaries are installed #11841: grub-efi.cfg not used when building EFI disk image #11911: systemd v240 memory leak in systemd-journald diff --git a/buildroot/DEVELOPERS b/buildroot/DEVELOPERS index 0d185ee97..58adad5c1 100644 --- a/buildroot/DEVELOPERS +++ b/buildroot/DEVELOPERS @@ -26,9 +26,6 @@ # infrastructure, and will be CC'ed on all patches that add or # modify packages that use this infrastructure. -N: Abhilash Tuse -F: package/gstreamer1/gst1-rtsp-server/ - N: Adam Duskett F: package/audit/ F: package/busybox/ @@ -127,7 +124,6 @@ N: Anders Darander F: package/ktap/ N: André Hentschel -F: package/azure-iot-sdk-c/ F: package/libkrb5/ F: package/openal/ F: package/p7zip/ @@ -148,9 +144,6 @@ F: package/zstd/ N: Andrey Yurovsky F: package/rauc/ -N: Andy Kennedy -F: package/libunwind/ - N: Angelo Compagnucci F: package/corkscrew/ F: package/fail2ban/ @@ -209,11 +202,12 @@ F: package/sqlcipher/ F: package/stress/ N: Asaf Kahlon +F: package/collectd/ F: package/libuv/ F: package/python* F: package/zeromq/ -N: Ash Charles +N: Ash Charles F: package/pru-software-support/ F: package/ti-cgt-pru/ @@ -267,7 +261,6 @@ F: package/alsa-utils/ F: package/apache/ F: package/apr/ F: package/apr-util/ -F: package/asterisk/ F: package/bcg729/ F: package/bluez-tools/ F: package/boinc/ @@ -316,6 +309,7 @@ F: package/libilbc/ F: package/libldns/ F: package/libmicrohttpd/ F: package/libminiupnpc/ +F: package/libmspack/ F: package/libnatpmp/ F: package/libnpth/ F: package/libogg/ @@ -563,9 +557,6 @@ F: package/log4cpp/ N: Daniel Nicoletti F: package/cutelyst/ -N: Daniel Nyström -F: package/e2tools/ - N: Daniel Price F: package/nodejs/ F: package/redis/ @@ -633,9 +624,6 @@ F: package/unscd/ N: Dushara Jayasinghe F: package/prosody/ -N: Ed Swierk -F: package/xxhash/ - N: Eric Le Bihan F: docs/manual/adding-packages-meson.txt F: package/adwaita-icon-theme/ @@ -819,7 +807,9 @@ F: package/ser2net/ N: Francois Perrad F: board/olimex/a20_olinuxino +F: board/olimex/imx233_olinuxino/ F: configs/olimex_a20_olinuxino_* +F: configs/olimex_imx233_olinuxino_defconfig F: package/4th/ F: package/chipmunk/ F: package/dado/ @@ -892,7 +882,7 @@ F: package/tesseract-ocr/ F: package/webp/ F: package/xapian/ -N: Giulio Benetti +N: Giulio Benetti F: package/minicom/ F: package/sunxi-mali-mainline/ F: package/sunxi-mali-mainline-driver/ @@ -1131,10 +1121,6 @@ F: package/phidgetwebservice/ F: package/rapidxml/ F: package/sphinxbase/ -N: Jonathan Liu -F: package/python-meld3/ -F: package/supervisor/ - N: Jörg Krause F: board/lemaker/bananapro/ F: configs/bananapro_defconfig @@ -1201,9 +1187,6 @@ F: package/python-pygame/ N: Julien Corjon F: package/qt5/ -N: Julien Floret -F: package/lldpd/ - N: Julien Grossholtz F: package/paho-mqtt-c @@ -1223,9 +1206,6 @@ F: package/cpuload/ F: package/bwm-ng/ F: package/ramsmp/ -N: Kevin Joly -F: package/libgphoto2/ - N: Koen Martens F: package/capnproto/ F: package/linuxconsoletools/ @@ -1329,9 +1309,6 @@ F: package/luaossl/ F: package/rs485conf/ F: package/turbolua/ -N: Marcin Nowakowski -F: package/libkcapi/ - N: Marcus Folkesson F: package/libostree/ F: package/libselinux/ @@ -1354,7 +1331,7 @@ F: package/lynx/ N: Mario Rugiero F: package/ratpoison/ -N: Mark Corbin +N: Mark Corbin F: arch/arch.mk.riscv F: arch/Config.in.riscv F: board/qemu/riscv32-virt/ @@ -1363,10 +1340,6 @@ F: boot/riscv-pk/ F: configs/qemu_riscv32_virt_defconfig F: configs/qemu_riscv64_virt_defconfig -N: Markos Chandras -F: package/harfbuzz/ -F: package/libsecret/ - N: Martin Bark F: board/raspberrypi/ F: configs/raspberrypi3_defconfig @@ -1387,7 +1360,7 @@ F: package/tslib/ F: package/x11r7/xdriver_xf86-input-tslib/ F: package/x11vnc/ -N: Mathieu Audat +N: Mathieu Audat F: board/technologic/ts4900/ F: configs/ts4900_defconfig F: package/ts4900-fpga/ @@ -1547,6 +1520,9 @@ F: package/python-pyzmq/ N: Michael Trimarchi F: package/python-spidev/ +N: Michael Vetter +F: package/jasper/ + N: Michał Łyszczek F: board/altera/socrates_cyclone5/ F: board/pine64/rock64 @@ -1566,9 +1542,6 @@ F: package/shadowsocks-libev/ N: Mirza Krak F: package/mender/ -N: Morgan Delestre -F: package/monkey/ - N: Murat Demirten F: package/jpeg-turbo/ F: package/libgeotiff/ @@ -1698,6 +1671,8 @@ F: package/python-webob/ F: package/python-websocket-client/ F: package/sedutil/ F: package/triggerhappy/ +F: package/wireguard/ +F: support/testing/tests/package/test_docker_compose.py N: Peter Seiderer F: board/raspberrypi/ @@ -1781,9 +1756,6 @@ F: package/libdvbpsi/ F: package/mraa/ F: package/synergy/ -N: Pranit Sirsat -F: package/paho-mqtt-c/ - N: Qais Yousef F: package/bellagio/ @@ -1814,7 +1786,13 @@ N: Ricardo Martincoski F: package/atop/ N: Ricardo Martincoski -F: support/testing/ +F: support/testing/infra/ +F: support/testing/run-tests +F: support/testing/tests/core/test_file_capabilities.py +F: support/testing/tests/download/ +F: support/testing/tests/package/*_python*.py +F: support/testing/tests/package/test_atop.py +F: support/testing/tests/package/test_syslog_ng.py F: utils/check-package F: utils/checkpackagelib/ @@ -1840,6 +1818,8 @@ F: package/vnstat/ N: Romain Naour F: package/aubio/ F: package/bullet/ +F: package/clang/ +F: package/clinfo/ F: package/efl/ F: package/enlightenment/ F: package/flare-engine/ @@ -1847,9 +1827,11 @@ F: package/flare-game/ F: package/irrlicht/ F: package/liblinear/ F: package/lensfun/ +F: package/libclc/ F: package/libgta/ F: package/libspatialindex/ F: package/linux-syscall-support/ +F: package/llvm/ F: package/lugaru/ F: package/mcelog/ F: package/mesa3d/ @@ -2036,9 +2018,6 @@ F: package/tovid/ F: package/udftools/ F: package/xorriso/ -N: Steve Thomas -F: package/isl/ - N: Steven Noonan F: package/hwloc/ F: package/powertop/ @@ -2176,7 +2155,7 @@ F: package/pixz/ N: Vinicius Tinti F: package/python-thrift/ -N: Vivien Didelot +N: Vivien Didelot F: board/technologic/ts5500/ F: configs/ts5500_defconfig @@ -2258,6 +2237,8 @@ F: package/zisofs-tools/ F: support/download/ N: Yegor Yefremov +F: configs/beaglebone_defconfig +F: configs/beaglebone_qt5_defconfig F: package/acl/ F: package/attr/ F: package/bluez_utils/ @@ -2266,6 +2247,7 @@ F: package/bootstrap/ F: package/cannelloni/ F: package/can-utils/ F: package/circus/ +F: package/dhcpcd/ F: package/feh/ F: package/giblib/ F: package/imlib2/ @@ -2282,6 +2264,7 @@ F: package/libubox/ F: package/libuci/ F: package/linux-firmware/ F: package/modem-manager/ +F: package/nftables/ F: package/nuttcp/ F: package/parted/ F: package/phytool/ diff --git a/buildroot/Makefile b/buildroot/Makefile index 2c8146e87..93d30ff14 100644 --- a/buildroot/Makefile +++ b/buildroot/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2019.02.3 +export BR2_VERSION := 2019.02.9 # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1559893000 +BR2_VERSION_EPOCH = 1578842000 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) @@ -248,7 +248,6 @@ ifeq ($(BR2_REPRODUCIBLE),y) export TZ = UTC export LANG = C export LC_ALL = C -export GZIP = -n endif # To put more focus on warnings, be less verbose as default @@ -811,6 +810,7 @@ endif # merged /usr .PHONY: target-post-image target-post-image: $(TARGETS_ROOTFS) target-finalize staging-finalize @rm -f $(ROOTFS_COMMON_TAR) + $(Q)mkdir -p $(BINARIES_DIR) @$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \ $(call MESSAGE,"Executing post-image script $(s)"); \ $(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep)) diff --git a/buildroot/arch/Config.in.x86 b/buildroot/arch/Config.in.x86 index f7c53a0fa..331ee06bf 100644 --- a/buildroot/arch/Config.in.x86 +++ b/buildroot/arch/Config.in.x86 @@ -101,6 +101,15 @@ config BR2_x86_corei7 select BR2_X86_CPU_HAS_SSSE3 select BR2_X86_CPU_HAS_SSE4 select BR2_X86_CPU_HAS_SSE42 +config BR2_x86_westmere + bool "westmere" + select BR2_X86_CPU_HAS_MMX + select BR2_X86_CPU_HAS_SSE + select BR2_X86_CPU_HAS_SSE2 + select BR2_X86_CPU_HAS_SSE3 + select BR2_X86_CPU_HAS_SSSE3 + select BR2_X86_CPU_HAS_SSE4 + select BR2_X86_CPU_HAS_SSE42 config BR2_x86_corei7_avx bool "corei7-avx" select BR2_X86_CPU_HAS_MMX @@ -235,8 +244,9 @@ config BR2_ARCH default "i686" if BR2_x86_nocona && BR2_i386 default "i686" if BR2_x86_core2 && BR2_i386 default "i686" if BR2_x86_corei7 && BR2_i386 + default "i686" if BR2_x86_westmere && BR2_i386 default "i686" if BR2_x86_corei7_avx && BR2_i386 - default "i686" if BR2_x86_corei7_avx2 && BR2_i386 + default "i686" if BR2_x86_core_avx2 && BR2_i386 default "i686" if BR2_x86_atom && BR2_i386 default "i686" if BR2_x86_silvermont && BR2_i386 default "i686" if BR2_x86_opteron && BR2_i386 @@ -271,6 +281,7 @@ config BR2_GCC_TARGET_ARCH default "corei7-avx" if BR2_x86_corei7_avx default "core-avx2" if BR2_x86_core_avx2 default "atom" if BR2_x86_atom + default "westmere" if BR2_x86_westmere default "silvermont" if BR2_x86_silvermont default "k8" if BR2_x86_opteron default "k8-sse3" if BR2_x86_opteron_sse3 diff --git a/buildroot/board/beaglebone/uEnv.txt b/buildroot/board/beaglebone/uEnv.txt index a665f2088..8fce54d87 100644 --- a/buildroot/board/beaglebone/uEnv.txt +++ b/buildroot/board/beaglebone/uEnv.txt @@ -3,6 +3,9 @@ devtype=mmc bootdir= bootfile=zImage bootpartition=mmcblk0p2 +console=ttyS0,115200n8 +loadaddr=0x82000000 +fdtaddr=0x88000000 set_mmc1=if test $board_name = A33515BB; then setenv bootpartition mmcblk1p2; fi -set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait +set_bootargs=setenv bootargs console=${console} root=/dev/${bootpartition} rw rootfstype=ext4 rootwait uenvcmd=run set_mmc1; run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr} diff --git a/buildroot/board/qemu/aarch64-virt/readme.txt b/buildroot/board/qemu/aarch64-virt/readme.txt index 1ff2fba47..f868905d9 100644 --- a/buildroot/board/qemu/aarch64-virt/readme.txt +++ b/buildroot/board/qemu/aarch64-virt/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 + qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/arm-versatile/readme.txt b/buildroot/board/qemu/arm-versatile/readme.txt index 33cdb7b81..f3a9e1ab4 100644 --- a/buildroot/board/qemu/arm-versatile/readme.txt +++ b/buildroot/board/qemu/arm-versatile/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user + qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user Or for the noMMU emulation: diff --git a/buildroot/board/qemu/arm-vexpress/readme.txt b/buildroot/board/qemu/arm-vexpress/readme.txt index 35137e050..7f7b43a3b 100644 --- a/buildroot/board/qemu/arm-vexpress/readme.txt +++ b/buildroot/board/qemu/arm-vexpress/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user + qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/buildroot/board/qemu/m68k-q800/readme.txt b/buildroot/board/qemu/m68k-q800/readme.txt index bead8cdde..b516bacdf 100644 --- a/buildroot/board/qemu/m68k-q800/readme.txt +++ b/buildroot/board/qemu/m68k-q800/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/sda console=ttyS0" + qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0" The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/mips32r2-malta/readme.txt b/buildroot/board/qemu/mips32r2-malta/readme.txt index d1bbcc474..9ff3c4b81 100644 --- a/buildroot/board/qemu/mips32r2-malta/readme.txt +++ b/buildroot/board/qemu/mips32r2-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -net nic,model=pcnet -net user + qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been diff --git a/buildroot/board/qemu/mips32r2el-malta/readme.txt b/buildroot/board/qemu/mips32r2el-malta/readme.txt index 4f59d3430..745bfea60 100644 --- a/buildroot/board/qemu/mips32r2el-malta/readme.txt +++ b/buildroot/board/qemu/mips32r2el-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -net nic,model=pcnet -net user + qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been diff --git a/buildroot/board/qemu/mips32r6-malta/readme.txt b/buildroot/board/qemu/mips32r6-malta/readme.txt index 04de7e5c3..6a026b216 100644 --- a/buildroot/board/qemu/mips32r6-malta/readme.txt +++ b/buildroot/board/qemu/mips32r6-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: -qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic +qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/mips32r6el-malta/readme.txt b/buildroot/board/qemu/mips32r6el-malta/readme.txt index 88602de0b..f69fd21af 100644 --- a/buildroot/board/qemu/mips32r6el-malta/readme.txt +++ b/buildroot/board/qemu/mips32r6el-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: -qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -net nic,model=pcnet -net user -nographic +qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/mips64-malta/readme.txt b/buildroot/board/qemu/mips64-malta/readme.txt index f0e7fef79..ea3a92541 100644 --- a/buildroot/board/qemu/mips64-malta/readme.txt +++ b/buildroot/board/qemu/mips64-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" + qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/buildroot/board/qemu/mips64el-malta/readme.txt b/buildroot/board/qemu/mips64el-malta/readme.txt index 03b149bc8..144da9383 100644 --- a/buildroot/board/qemu/mips64el-malta/readme.txt +++ b/buildroot/board/qemu/mips64el-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" + qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/buildroot/board/qemu/mips64r6-malta/readme.txt b/buildroot/board/qemu/mips64r6-malta/readme.txt index bf5b517a3..cfa16fd86 100644 --- a/buildroot/board/qemu/mips64r6-malta/readme.txt +++ b/buildroot/board/qemu/mips64r6-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic + qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/mips64r6el-malta/readme.txt b/buildroot/board/qemu/mips64r6el-malta/readme.txt index d51bffd08..61a6ceb5f 100644 --- a/buildroot/board/qemu/mips64r6el-malta/readme.txt +++ b/buildroot/board/qemu/mips64r6el-malta/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic + qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/ppc-g3beige/readme.txt b/buildroot/board/qemu/ppc-g3beige/readme.txt index 1c3b51539..608814ee3 100644 --- a/buildroot/board/qemu/ppc-g3beige/readme.txt +++ b/buildroot/board/qemu/ppc-g3beige/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user + qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 rootwait root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/buildroot/board/qemu/ppc64-e5500/readme.txt b/buildroot/board/qemu/ppc64-e5500/readme.txt index cfc563974..808076698 100644 --- a/buildroot/board/qemu/ppc64-e5500/readme.txt +++ b/buildroot/board/qemu/ppc64-e5500/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 root=/dev/vda" -serial mon:stdio -nographic + qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 rootwait root=/dev/vda" -serial mon:stdio -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/ppc64-pseries/readme.txt b/buildroot/board/qemu/ppc64-pseries/readme.txt index 5069df9e5..6a3e96a2e 100644 --- a/buildroot/board/qemu/ppc64-pseries/readme.txt +++ b/buildroot/board/qemu/ppc64-pseries/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses + qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/ppc64le-pseries/readme.txt b/buildroot/board/qemu/ppc64le-pseries/readme.txt index c23da70df..2728675df 100644 --- a/buildroot/board/qemu/ppc64le-pseries/readme.txt +++ b/buildroot/board/qemu/ppc64le-pseries/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: -qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses +qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses The login prompt will appear in the terminal window. diff --git a/buildroot/board/qemu/riscv32-virt/readme.txt b/buildroot/board/qemu/riscv32-virt/readme.txt index 2da99580e..24d44f0a9 100644 --- a/buildroot/board/qemu/riscv32-virt/readme.txt +++ b/buildroot/board/qemu/riscv32-virt/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-riscv32 -M virt -kernel output/images/bbl -append "root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic + qemu-system-riscv32 -M virt -kernel output/images/bbl -append "rootwait root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/riscv64-virt/readme.txt b/buildroot/board/qemu/riscv64-virt/readme.txt index 9f6e35c86..e878330de 100644 --- a/buildroot/board/qemu/riscv64-virt/readme.txt +++ b/buildroot/board/qemu/riscv64-virt/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-riscv64 -M virt -kernel output/images/bbl -append "root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic + qemu-system-riscv64 -M virt -kernel output/images/bbl -append "rootwait root=/dev/vda ro console=ttyS0" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/sh4-r2d/readme.txt b/buildroot/board/qemu/sh4-r2d/readme.txt index d22af73ae..dd80953b9 100644 --- a/buildroot/board/qemu/sh4-r2d/readme.txt +++ b/buildroot/board/qemu/sh4-r2d/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user + qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/buildroot/board/qemu/sh4eb-r2d/readme.txt b/buildroot/board/qemu/sh4eb-r2d/readme.txt index daf515ab2..e71a9bce9 100644 --- a/buildroot/board/qemu/sh4eb-r2d/readme.txt +++ b/buildroot/board/qemu/sh4eb-r2d/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-sh4eb -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user + qemu-system-sh4eb -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/buildroot/board/qemu/sparc-ss10/readme.txt b/buildroot/board/qemu/sparc-ss10/readme.txt index df6a75a3f..33833c2d3 100644 --- a/buildroot/board/qemu/sparc-ss10/readme.txt +++ b/buildroot/board/qemu/sparc-ss10/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user + qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/sparc64-sun4u/readme.txt b/buildroot/board/qemu/sparc64-sun4u/readme.txt index 24d5bbaff..f2e6e81a8 100644 --- a/buildroot/board/qemu/sparc64-sun4u/readme.txt +++ b/buildroot/board/qemu/sparc64-sun4u/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user + qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user The login prompt will appear in the terminal that started Qemu. diff --git a/buildroot/board/qemu/x86/readme.txt b/buildroot/board/qemu/x86/readme.txt index c5e687734..42fc2439d 100644 --- a/buildroot/board/qemu/x86/readme.txt +++ b/buildroot/board/qemu/x86/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "root=/dev/vda" -net nic,model=virtio -net user + qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda" -net nic,model=virtio -net user Optionally add -smp N to emulate a SMP system with N CPUs. diff --git a/buildroot/board/qemu/x86_64/readme.txt b/buildroot/board/qemu/x86_64/readme.txt index 425e34b12..4a1c0c0ff 100644 --- a/buildroot/board/qemu/x86_64/readme.txt +++ b/buildroot/board/qemu/x86_64/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "root=/dev/vda" -net nic,model=virtio -net user + qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda" -net nic,model=virtio -net user Optionally add -smp N to emulate a SMP system with N CPUs. diff --git a/buildroot/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/buildroot/boot/arm-trusted-firmware/arm-trusted-firmware.mk index 8ca3864dd..464e4d95e 100644 --- a/buildroot/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/buildroot/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -5,8 +5,6 @@ ################################################################################ ARM_TRUSTED_FIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_VERSION)) -ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause -ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.rst ifeq ($(ARM_TRUSTED_FIRMWARE_VERSION),custom) # Handle custom ATF tarballs as specified by the configuration @@ -19,6 +17,10 @@ ARM_TRUSTED_FIRMWARE_SITE_METHOD = git else # Handle stable official ATF versions ARM_TRUSTED_FIRMWARE_SITE = $(call github,ARM-software,arm-trusted-firmware,$(ARM_TRUSTED_FIRMWARE_VERSION)) +# The licensing of custom or from-git versions is unknown. +# This is valid only for the official v1.4. +ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause +ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.rst endif ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION),y) diff --git a/buildroot/boot/barebox/barebox.mk b/buildroot/boot/barebox/barebox.mk index 9e8a9f67b..52178d89c 100644 --- a/buildroot/boot/barebox/barebox.mk +++ b/buildroot/boot/barebox/barebox.mk @@ -76,6 +76,10 @@ $(1)_KCONFIG_FRAGMENT_FILES = $$(call qstrip,$$(BR2_TARGET_$(1)_CONFIG_FRAGMENT_ $(1)_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig $(1)_KCONFIG_OPTS = $$($(1)_MAKE_FLAGS) +$(1)_KCONFIG_DEPENDENCIES = \ + $(BR2_BISON_HOST_DEPENDENCY) \ + $(BR2_FLEX_HOST_DEPENDENCY) + ifeq ($$(BR2_TARGET_$(1)_BAREBOXENV),y) define $(1)_BUILD_BAREBOXENV_CMDS $$(TARGET_CC) $$(TARGET_CFLAGS) $$(TARGET_LDFLAGS) -o $$(@D)/bareboxenv \ diff --git a/buildroot/configs/aarch64_efi_defconfig b/buildroot/configs/aarch64_efi_defconfig index e87193218..2aab6e969 100644 --- a/buildroot/configs/aarch64_efi_defconfig +++ b/buildroot/configs/aarch64_efi_defconfig @@ -13,7 +13,7 @@ BR2_PACKAGE_HOST_GENIMAGE=y # Bootloader BR2_TARGET_GRUB2=y -BR2_TARGET_GRUB2_AARCH64_EFI=y +BR2_TARGET_GRUB2_ARM64_EFI=y # Filesystem / image BR2_TARGET_ROOTFS_EXT2=y diff --git a/buildroot/configs/beaglebone_defconfig b/buildroot/configs/beaglebone_defconfig index b4f152fd6..fbb259f57 100644 --- a/buildroot/configs/beaglebone_defconfig +++ b/buildroot/configs/beaglebone_defconfig @@ -2,7 +2,6 @@ BR2_arm=y BR2_cortex_a8=y BR2_GLOBAL_PATCH_DIR="board/beaglebone/patches" BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y -BR2_TARGET_GENERIC_GETTY_PORT="ttyO0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/beaglebone/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_GIT=y diff --git a/buildroot/docs/manual/adding-packages-cargo.txt b/buildroot/docs/manual/adding-packages-cargo.txt index b7fc09acf..b6029e1ee 100644 --- a/buildroot/docs/manual/adding-packages-cargo.txt +++ b/buildroot/docs/manual/adding-packages-cargo.txt @@ -17,7 +17,7 @@ The +Config.in+ file of Cargo-based package 'foo' should contain: --------------------------- 01: config BR2_PACKAGE_FOO 02: bool "foo" -03: depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS +03: depends on BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS 04: select BR2_PACKAGE_HOST_CARGO 05: help 06: This is a comment that explains what foo is. diff --git a/buildroot/docs/manual/adding-packages-generic.txt b/buildroot/docs/manual/adding-packages-generic.txt index 7be1754f5..1e2f08cec 100644 --- a/buildroot/docs/manual/adding-packages-generic.txt +++ b/buildroot/docs/manual/adding-packages-generic.txt @@ -358,9 +358,11 @@ not and can not work as people would expect it should: * +LIBFOO_DEPENDENCIES+ lists the dependencies (in terms of package name) that are required for the current target package to compile. These dependencies are guaranteed to be compiled and - installed before the configuration of the current package starts. In - a similar way, +HOST_LIBFOO_DEPENDENCIES+ lists the dependencies for - the current host package. + installed before the configuration of the current package starts. + However, modifications to configuration of these dependencies will + not force a rebuild of the current package. In a similar way, + +HOST_LIBFOO_DEPENDENCIES+ lists the dependencies for the current + host package. * +LIBFOO_EXTRACT_DEPENDENCIES+ lists the dependencies (in terms of package name) that are required for the current target package to be diff --git a/buildroot/docs/manual/adding-packages-python.txt b/buildroot/docs/manual/adding-packages-python.txt index 15137cfd6..74e2e78b2 100644 --- a/buildroot/docs/manual/adding-packages-python.txt +++ b/buildroot/docs/manual/adding-packages-python.txt @@ -67,9 +67,13 @@ Python build system, but are not Python modules, can freely choose their name (existing examples in Buildroot are +scons+ and +supervisor+). -In their +Config.in+ file, they should depend on +BR2_PACKAGE_PYTHON+ -so that when Buildroot will enable Python 3 usage for modules, we will -be able to enable Python modules progressively on Python 3. +Packages that are only compatible with one version of Python (as in: +Python 2 or Python 3) should depend on that version explicitely in +their +Config.in+ file (+BR2_PACKAGE_PYTHON+ for Python 2, ++BR2_PACKAGE_PYTHON3+ for Python 3). Packages that are compatible +with both versions should not explicitely depend on them in their ++Config.in+ file, since that condition is already expressed for the +whole "External python modules" menu. The main macro of the Python package infrastructure is +python-package+. It is similar to the +generic-package+ macro. It is diff --git a/buildroot/docs/manual/common-usage.txt b/buildroot/docs/manual/common-usage.txt index e3d7578c8..a36301afd 100644 --- a/buildroot/docs/manual/common-usage.txt +++ b/buildroot/docs/manual/common-usage.txt @@ -310,8 +310,8 @@ installed (+python-matplotlib+ on most distributions), and also the +argparse+ module if you're using a Python version older than 2.7 (+python-argparse+ on most distributions). -Just like for the duration graph, a +BR2_GRAPH_OUT+ environment is -supported to adjust the output file format. See xref:graph-depends[] +Just like for the duration graph, a +BR2_GRAPH_OUT+ environment variable +is supported to adjust the output file format. See xref:graph-depends[] for details about this environment variable. .Note diff --git a/buildroot/docs/manual/configure.txt b/buildroot/docs/manual/configure.txt index 008813c9b..c9eef567f 100644 --- a/buildroot/docs/manual/configure.txt +++ b/buildroot/docs/manual/configure.txt @@ -206,9 +206,9 @@ Buildroot or crosstool-NG. If you want to generate a custom toolchain for your project, that can be used as an external toolchain in Buildroot, our recommendation is -definitely to build it with http://crosstool-ng.org[crosstool-NG]. We -recommend to build the toolchain separately from Buildroot, and then -_import_ it in Buildroot using the external toolchain backend. +to build it either with Buildroot itself (see +xref:build-toolchain-with-buildroot[]) or with +http://crosstool-ng.org[crosstool-NG]. Advantages of this backend: @@ -223,7 +223,53 @@ Drawbacks of this backend: * If your pre-built external toolchain has a bug, may be hard to get a fix from the toolchain vendor, unless you build your external - toolchain by yourself using Crosstool-NG. + toolchain by yourself using Buildroot or Crosstool-NG. + +[[build-toolchain-with-buildroot]] +==== Build an external toolchain with Buildroot + +The Buildroot internal toolchain option can be used to create an +external toolchain. Here are a series of steps to build an internal +toolchain and package it up for reuse by Buildroot itself (or other +projects). + +Create a new Buildroot configuration, with the following details: + +* Select the appropriate *Target options* for your target CPU + architecture + +* In the *Toolchain* menu, keep the default of *Buildroot toolchain* + for *Toolchain type*, and configure your toolchain as desired + +* In the *System configuration* menu, select *None* as the *Init + system* and *none* as */bin/sh* + +* In the *Target packages* menu, disable *BusyBox* + +* In the *Filesystem images* menu, disable *tar the root filesystem* + +Then, we can trigger the build, and also ask Buildroot to generate a +SDK. This will conveniently generate for us a tarball which contains +our toolchain: + +----- +make sdk +----- + +This produces the SDK tarball in +$(O)/images+, with a name similar to ++arm-buildroot-linux-uclibcgnueabi_sdk-buildroot.tar.gz+. Save this +tarball, as it is now the toolchain that you can re-use as an external +toolchain in other Buildroot projects. + +In those other Buildroot projects, in the *Toolchain* menu: + +* Set *Toolchain type* to *External toolchain* + +* Set *Toolchain* to *Custom toolchain* + +* Set *Toolchain origin* to *Toolchain to be downloaded and installed* + +* Set *Toolchain URL* to +file:///path/to/your/sdk/tarball.tar.gz+ ===== External toolchain wrapper diff --git a/buildroot/docs/manual/contribute.txt b/buildroot/docs/manual/contribute.txt index 5530ce154..f339ca50b 100644 --- a/buildroot/docs/manual/contribute.txt +++ b/buildroot/docs/manual/contribute.txt @@ -73,7 +73,7 @@ basically two things that can be done: In the commit message of a patch fixing an autobuild failure, add a reference to the build result directory, as follows: --------------------- -Fixes http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069 +Fixes: http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069 --------------------- === Reviewing and testing patches @@ -402,7 +402,7 @@ the problem is complex, it is OK to add more paragraphs. All paragraphs should be wrapped at 72 characters. A paragraph that explains the root cause of the problem. Again, more -than on paragraph is OK. +than one paragraph is OK. Finally, one or more paragraphs that explain how the problem is solved. Don't hesitate to explain complex solutions in detail. diff --git a/buildroot/docs/manual/manual.html b/buildroot/docs/manual/manual.html index bc5aa774d..48f7cb006 100644 --- a/buildroot/docs/manual/manual.html +++ b/buildroot/docs/manual/manual.html @@ -1,8 +1,8 @@ -The Buildroot user manual

The Buildroot user manual

Table of Contents

I. Getting started
1. About Buildroot
2. System requirements
2.1. Mandatory packages
2.2. Optional packages
3. Getting Buildroot
4. Buildroot quick start
5. Community resources
II. User guide
6. Buildroot configuration
6.1. Cross-compilation toolchain
6.2. /dev management
6.3. init system
7. Configuration of other components
8. General Buildroot usage
8.1. make tips
8.2. Understanding when a full rebuild is necessary
8.3. Understanding how to rebuild packages
8.4. Offline builds
8.5. Building out-of-tree
8.6. Environment variables
8.7. Dealing efficiently with filesystem images
8.8. Graphing the dependencies between packages
8.9. Graphing the build duration
8.10. Graphing the filesystem size contribution of packages
8.11. Integration with Eclipse
8.12. Advanced usage
9. Project-specific customization
9.1. Recommended directory structure
9.2. Keeping customizations outside of Buildroot
9.3. Storing the Buildroot configuration
9.4. Storing the configuration of other components
9.5. Customizing the generated target filesystem
9.6. Adding custom user accounts
9.7. Customization after the images have been created
9.8. Adding project-specific patches
9.9. Adding project-specific packages
9.10. Quick guide to storing your project-specific customizations
10. Frequently Asked Questions & Troubleshooting
10.1. The boot hangs after Starting network…
10.2. Why is there no compiler on the target?
10.3. Why are there no development files on the target?
10.4. Why is there no documentation on the target?
10.5. Why are some packages not visible in the Buildroot config menu?
10.6. Why not use the target directory as a chroot directory?
10.7. Why doesn’t Buildroot generate binary packages (.deb, .ipkg…)?
10.8. How to speed-up the build process?
11. Known issues
12. Legal notice and licensing
12.1. Complying with open source licenses
12.2. Complying with the Buildroot license
13. Beyond Buildroot
13.1. Boot the generated images
13.2. Chroot
III. Developer guide
14. How Buildroot works
15. Coding style
15.1. Config.in file
15.2. The .mk file
15.3. The documentation
15.4. Support scripts
16. Adding support for a particular board
17. Adding new packages to Buildroot
17.1. Package directory
17.2. Config files
17.3. The .mk file
17.4. The .hash file
17.5. Infrastructure for packages with specific build systems
17.6. Infrastructure for autotools-based packages
17.7. Infrastructure for CMake-based packages
17.8. Infrastructure for Python packages
17.9. Infrastructure for LuaRocks-based packages
17.10. Infrastructure for Perl/CPAN packages
17.11. Infrastructure for virtual packages
17.12. Infrastructure for packages using kconfig for configuration files
17.13. Infrastructure for rebar-based packages
17.14. Infrastructure for Waf-based packages
17.15. Infrastructure for Meson-based packages
17.16. Integration of Cargo-based packages
17.17. Infrastructure for Go packages
17.18. Infrastructure for packages building kernel modules
17.19. Infrastructure for asciidoc documents
17.20. Infrastructure specific to the Linux kernel package
17.21. Hooks available in the various build steps
17.22. Gettext integration and interaction with packages
17.23. Tips and tricks
17.24. Conclusion
18. Patching a package
18.1. Providing patches
18.2. How patches are applied
18.3. Format and licensing of the package patches
18.4. Integrating patches found on the Web
19. Download infrastructure
20. Debugging Buildroot
21. Contributing to Buildroot
21.1. Reproducing, analyzing and fixing bugs
21.2. Analyzing and fixing autobuild failures
21.3. Reviewing and testing patches
21.4. Work on items from the TODO list
21.5. Submitting patches
21.6. Reporting issues/bugs or getting help
22. DEVELOPERS file and get-developers
IV. Appendix
23. Makedev syntax documentation
24. Makeusers syntax documentation
25. Migrating from older Buildroot versions
25.1. Migrating to 2016.11
25.2. Migrating to 2017.08

List of Examples

17.1. Config script: divine package
17.2. Config script: imagemagick package:

Buildroot 2019.02.3 manual generated on 2019-06-07 -07:39:11 UTC from git revision 3e8b918b87

The Buildroot manual is written by the Buildroot developers. +The Buildroot user manual

The Buildroot user manual

Table of Contents

I. Getting started
1. About Buildroot
2. System requirements
2.1. Mandatory packages
2.2. Optional packages
3. Getting Buildroot
4. Buildroot quick start
5. Community resources
II. User guide
6. Buildroot configuration
6.1. Cross-compilation toolchain
6.2. /dev management
6.3. init system
7. Configuration of other components
8. General Buildroot usage
8.1. make tips
8.2. Understanding when a full rebuild is necessary
8.3. Understanding how to rebuild packages
8.4. Offline builds
8.5. Building out-of-tree
8.6. Environment variables
8.7. Dealing efficiently with filesystem images
8.8. Graphing the dependencies between packages
8.9. Graphing the build duration
8.10. Graphing the filesystem size contribution of packages
8.11. Integration with Eclipse
8.12. Advanced usage
9. Project-specific customization
9.1. Recommended directory structure
9.2. Keeping customizations outside of Buildroot
9.3. Storing the Buildroot configuration
9.4. Storing the configuration of other components
9.5. Customizing the generated target filesystem
9.6. Adding custom user accounts
9.7. Customization after the images have been created
9.8. Adding project-specific patches
9.9. Adding project-specific packages
9.10. Quick guide to storing your project-specific customizations
10. Frequently Asked Questions & Troubleshooting
10.1. The boot hangs after Starting network…
10.2. Why is there no compiler on the target?
10.3. Why are there no development files on the target?
10.4. Why is there no documentation on the target?
10.5. Why are some packages not visible in the Buildroot config menu?
10.6. Why not use the target directory as a chroot directory?
10.7. Why doesn’t Buildroot generate binary packages (.deb, .ipkg…)?
10.8. How to speed-up the build process?
11. Known issues
12. Legal notice and licensing
12.1. Complying with open source licenses
12.2. Complying with the Buildroot license
13. Beyond Buildroot
13.1. Boot the generated images
13.2. Chroot
III. Developer guide
14. How Buildroot works
15. Coding style
15.1. Config.in file
15.2. The .mk file
15.3. The documentation
15.4. Support scripts
16. Adding support for a particular board
17. Adding new packages to Buildroot
17.1. Package directory
17.2. Config files
17.3. The .mk file
17.4. The .hash file
17.5. Infrastructure for packages with specific build systems
17.6. Infrastructure for autotools-based packages
17.7. Infrastructure for CMake-based packages
17.8. Infrastructure for Python packages
17.9. Infrastructure for LuaRocks-based packages
17.10. Infrastructure for Perl/CPAN packages
17.11. Infrastructure for virtual packages
17.12. Infrastructure for packages using kconfig for configuration files
17.13. Infrastructure for rebar-based packages
17.14. Infrastructure for Waf-based packages
17.15. Infrastructure for Meson-based packages
17.16. Integration of Cargo-based packages
17.17. Infrastructure for Go packages
17.18. Infrastructure for packages building kernel modules
17.19. Infrastructure for asciidoc documents
17.20. Infrastructure specific to the Linux kernel package
17.21. Hooks available in the various build steps
17.22. Gettext integration and interaction with packages
17.23. Tips and tricks
17.24. Conclusion
18. Patching a package
18.1. Providing patches
18.2. How patches are applied
18.3. Format and licensing of the package patches
18.4. Integrating patches found on the Web
19. Download infrastructure
20. Debugging Buildroot
21. Contributing to Buildroot
21.1. Reproducing, analyzing and fixing bugs
21.2. Analyzing and fixing autobuild failures
21.3. Reviewing and testing patches
21.4. Work on items from the TODO list
21.5. Submitting patches
21.6. Reporting issues/bugs or getting help
22. DEVELOPERS file and get-developers
IV. Appendix
23. Makedev syntax documentation
24. Makeusers syntax documentation
25. Migrating from older Buildroot versions
25.1. Migrating to 2016.11
25.2. Migrating to 2017.08

List of Examples

17.1. Config script: divine package
17.2. Config script: imagemagick package:

Buildroot 2019.02.9 manual generated on 2020-01-12 +15:28:43 UTC from git revision 24f25c8d23

The Buildroot manual is written by the Buildroot developers. It is licensed under the GNU General Public License, version 2. Refer to the -COPYING +COPYING file in the Buildroot sources for the full text of this license.

Copyright © 2004-2019 The Buildroot developers

logo.png

Part I. Getting started

Chapter 1. About Buildroot

Buildroot is a tool that simplifies and automates the process of building a complete Linux system for an embedded system, using cross-compilation.

In order to achieve this, Buildroot is able to generate a @@ -16,8 +16,8 @@ processors everyone is used to having in his PC. They can be PowerPC processors, MIPS processors, ARM processors, etc.

Buildroot supports numerous processors and their variants; it also comes with default configurations for several boards available off-the-shelf. Besides this, a number of third-party projects are based on, -or develop their BSP [1] or -SDK [2] on top of Buildroot.


[1] BSP: Board Support Package

[2] SDK: Software Development Kit

Chapter 2. System requirements

Buildroot is designed to run on Linux systems.

While Buildroot itself will build most host packages it needs for the +or develop their BSP [1] or +SDK [2] on top of Buildroot.


[1] BSP: Board Support Package

[2] SDK: Software Development Kit

Chapter 2. System requirements

Buildroot is designed to run on Linux systems.

While Buildroot itself will build most host packages it needs for the compilation, certain standard Linux utilities are expected to be already installed on the host system. Below you will find an overview of the mandatory and optional packages (note that package names may vary @@ -142,7 +142,6 @@ utility (including the interface), so you may need to install "development" packages for relevant libraries used by the configuration utilities. Refer to Chapter 2, System requirements for more details, specifically the optional requirements -Section 2.2, “Optional packages” to get the dependencies of your favorite interface.

For each menu entry in the configuration tool, you can find associated help that describes the purpose of the entry. Refer to Chapter 6, Buildroot configuration for details on some specific configuration aspects.

Once everything is configured, the configuration tool generates a @@ -174,15 +173,21 @@ This directory contains several subdirectories:

  • -staging/ which contains a hierarchy similar to a root filesystem - hierarchy. This directory contains the headers and libraries of the - cross-compilation toolchain and all the userspace packages selected - for the target. However, this directory is not intended to be - the root filesystem for the target: it contains a lot of development - files, unstripped binaries and libraries that make it far too big - for an embedded system. These development files are used to compile - libraries and applications for the target that depend on other - libraries. +host/ contains both the tools built for the host, and the sysroot + of the target toolchain. The former is an installation of tools + compiled for the host that are needed for the proper execution of + Buildroot, including the cross-compilation toolchain. The latter + is a hierarchy similar to a root filesystem hierarchy. It contains + the headers and libraries of all user-space packages that provide + and install libraries used by other packages. However, this + directory is not intended to be the root filesystem for the target: + it contains a lot of development files, unstripped binaries and + libraries that make it far too big for an embedded system. These + development files are used to compile libraries and applications for + the target that depend on other libraries. +
  • +staging/ is a symlink to the target toolchain sysroot inside + host/, which exists for backwards compatibility.
  • target/ which contains almost the complete root filesystem for the target: everything needed is present except the device files in @@ -197,10 +202,6 @@ This directory contains several subdirectories:

    • -host/ contains the installation of tools compiled for the host - that are needed for the proper execution of Buildroot, including the - cross-compilation toolchain.

    These commands, make menuconfig|nconfig|gconfig|xconfig and make, are the basic ones that allow to easily and quickly generate images fitting your needs, with all the features and applications you enabled.

    More details about the "make" command usage are given in @@ -272,7 +273,7 @@ processor. Under most Linux systems, the compilation toolchain uses the GNU libc (glibc) as the C standard library. This compilation toolchain is called the "host compilation toolchain". The machine on which it is running, and on which you’re working, is called the "host -system" [3].

    The compilation toolchain is provided by your distribution, and +system" [3].

    The compilation toolchain is provided by your distribution, and Buildroot has nothing to do with it (other than using it to build a cross-compilation toolchain and other tools that are run on the development host).

    As said above, the compilation toolchain that comes with your system @@ -398,9 +399,9 @@ build environment. So even if you are building a system for a x86 or x86_64 target, you have to generate a cross-compilation toolchain with Buildroot or crosstool-NG.

    If you want to generate a custom toolchain for your project, that can be used as an external toolchain in Buildroot, our recommendation is -definitely to build it with crosstool-NG. We -recommend to build the toolchain separately from Buildroot, and then -import it in Buildroot using the external toolchain backend.

    Advantages of this backend:

    • +to build it either with Buildroot itself (see +Section 6.1.3, “Build an external toolchain with Buildroot”) or with +crosstool-NG.

      Advantages of this backend:

      • Allows to use well-known and well-tested cross-compilation toolchains.
      • @@ -410,7 +411,36 @@ Avoids the build time of the cross-compilation toolchain, which is

      Drawbacks of this backend:

      • If your pre-built external toolchain has a bug, may be hard to get a fix from the toolchain vendor, unless you build your external - toolchain by yourself using Crosstool-NG. + toolchain by yourself using Buildroot or Crosstool-NG. +

    6.1.3. Build an external toolchain with Buildroot

    The Buildroot internal toolchain option can be used to create an +external toolchain. Here are a series of steps to build an internal +toolchain and package it up for reuse by Buildroot itself (or other +projects).

    Create a new Buildroot configuration, with the following details:

    • +Select the appropriate Target options for your target CPU + architecture +
    • +In the Toolchain menu, keep the default of Buildroot toolchain + for Toolchain type, and configure your toolchain as desired +
    • +In the System configuration menu, select None as the Init + system and none as /bin/sh +
    • +In the Target packages menu, disable BusyBox +
    • +In the Filesystem images menu, disable tar the root filesystem +

    Then, we can trigger the build, and also ask Buildroot to generate a +SDK. This will conveniently generate for us a tarball which contains +our toolchain:

    make sdk

    This produces the SDK tarball in $(O)/images, with a name similar to +arm-buildroot-linux-uclibcgnueabi_sdk-buildroot.tar.gz. Save this +tarball, as it is now the toolchain that you can re-use as an external +toolchain in other Buildroot projects.

    In those other Buildroot projects, in the Toolchain menu:

    • +Set Toolchain type to External toolchain +
    • +Set Toolchain to Custom toolchain +
    • +Set Toolchain origin to Toolchain to be downloaded and installed +
    • +Set Toolchain URL to file:///path/to/your/sdk/tarball.tar.gz

    External toolchain wrapper

    When using an external toolchain, Buildroot generates a wrapper program, that transparently passes the appropriate options (according to the configuration) to the external toolchain programs. In case you need to @@ -547,7 +577,7 @@ The third solution is systemd. http://www.freedesktop.org/wiki/Software/systemd.

The solution recommended by Buildroot developers is to use the BusyBox init as it is sufficient for most embedded -systems. systemd can be used for more complex situations.


[3] This terminology differs from what is used by GNU +systems. systemd can be used for more complex situations.


[3] This terminology differs from what is used by GNU configure, where the host is the machine on which the application will run (which is usually the same as target)

Chapter 7. Configuration of other components

Before attempting to modify any of the components below, make sure you have already configured Buildroot itself, and have enabled the @@ -698,6 +728,16 @@ When a change to the root filesystem skeleton is made, a full overlay, a post-build script or a post-image script are made, there is no need for a full rebuild: a simple make invocation will take the changes into account. +

  • +When a package listed in FOO_DEPENDENCIES is rebuilt or removed, + the package foo is not automatically rebuilt. For example, if a + package bar is listed in FOO_DEPENDENCIES with FOO_DEPENDENCIES + = bar and the configuration of the bar package is changed, the + configuration change would not result in a rebuild of package foo + automatically. In this scenario, you may need to either rebuild any + packages in your build which reference bar in their DEPENDENCIES, + or perform a full rebuild to ensure any bar dependent packages are + up to date.

    • Generally speaking, when you’re facing a build error and you’re unsure of the potential consequences of the configuration changes you’ve made, do a full rebuild. If you get the same build error, then you are @@ -715,14 +755,16 @@ depending on the availability of another package.

    The easiest way to rebui its build directory in output/build. Buildroot will then re-extract, re-configure, re-compile and re-install this package from scratch. You can ask buildroot to do this with the make <package>-dirclean command.

    On the other hand, if you only want to restart the build process of a -package from its compilation step, you can run make -<package>-rebuild, followed by make or make <package>. It will -restart the compilation and installation of the package, but not from -scratch: it basically re-executes make and make install -inside the package, so it will only rebuild files that changed.

    If you want to restart the build process of a package from its -configuration step, you can run make <package>-reconfigure, followed -by make or make <package>. It will restart the configuration, -compilation and installation of the package.

    Internally, Buildroot creates so-called stamp files to keep track of +package from its compilation step, you can run make <package>-rebuild. It +will restart the compilation and installation of the package, but not from +scratch: it basically re-executes make and make install inside the package, +so it will only rebuild files that changed.

    If you want to restart the build process of a package from its configuration +step, you can run make <package>-reconfigure. It will restart the +configuration, compilation and installation of the package.

    While <package>-rebuild implies <package>-reinstall and +<package>-reconfigure implies <package>-rebuild, these targets as well +as <package> only act on the said package, and do not trigger re-creating +the root filesystem image. If re-creating the root filesystem in necessary, +one should in addition run make or make all.

    Internally, Buildroot creates so-called stamp files to keep track of which build steps have been completed for each package. They are stored in the package build directory, output/build/<package>-<version>/ and are named @@ -900,8 +942,8 @@ the different packages.

    To generate these data after a build, run:

    This graph-size target requires the Python Matplotlib library to be
 installed (python-matplotlib on most distributions), and also the
 argparse module if you’re using a Python version older than 2.7
-(python-argparse on most distributions).
    Just like for the duration graph, a BR2_GRAPH_OUT environment is
-supported to adjust the output file format. See Section 8.8, “Graphing the dependencies between packages”
+(python-argparse on most distributions).
    Just like for the duration graph, a BR2_GRAPH_OUT environment variable
+is supported to adjust the output file format. See Section 8.8, “Graphing the dependencies between packages”
 for details about this environment variable.
    Note. The collected filesystem size data is only meaningful after a complete
 clean rebuild. Be sure to run make clean all before using make
 graph-size.
    To compare the root filesystem size of two different Buildroot compilations,
@@ -1025,8 +1067,7 @@ package
    graph-depends
    Generate a dependency graph of the package, in the
 context of the current Buildroot configuration. See
-this section
-Section 8.8, “Graphing the dependencies between packages” for more details about dependency
+this section for more details about dependency
 graphs.
    graph-rdepends
    Generate a graph of this package reverse
   dependencies (i.e the packages that depend on it, directly or
   indirectly)
    dirclean
    Remove the whole package build directory
    reinstall
    Re-run the install commands
    rebuild
    Re-run the compilation commands - this only makes
@@ -1093,7 +1134,11 @@ a local WebKit source tree:
    WEBKITGTK_OVERRIDE_SRCDIR = /
 WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
         --exclude JSTests --exclude ManualTests --exclude PerformanceTests \
         --exclude WebDriverTests --exclude WebKitBuild --exclude WebKitLibraries \
-        --exclude WebKit.xcworkspace --exclude Websites --exclude Examples
    Chapter 9. Project-specific customization
    Typical actions you may need to perform for a given project are:
    • 
+        --exclude WebKit.xcworkspace --exclude Websites --exclude Examples
      By default, Buildroot skips syncing of VCS artifacts (e.g., the .git and
+.svn directories). Some packages prefer to have these VCS directories
+available during build, for example for automatically determining a precise
+commit reference for version information. To undo this built-in filtering at a
+cost of a slower speed, add these directories back:
      LINUX_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = --include .git
    Chapter 9. Project-specific customization
    Typical actions you may need to perform for a given project are:
    • 
 configuring Buildroot (including build options and toolchain,
   bootloader, kernel, package and filesystem image type selection)
 
    • 
@@ -1548,8 +1593,7 @@ such changes from there unless you use an explicit fakeroot from the
 post-build script.
      Instead, Buildroot provides support for so-called permission tables.
 To use this feature, set config option BR2_ROOTFS_DEVICE_TABLE to a
 space-separated list of permission tables, regular text files following
-the makedev syntax
-Chapter 23, Makedev syntax documentation.
      If you are using a static device table (i.e. not using devtmpfs,
+the makedev syntax.
      If you are using a static device table (i.e. not using devtmpfs,
 mdev, or (e)udev) then you can add device nodes using the same
 syntax, in so-called device tables. To use this feature, set config
 option BR2_ROOTFS_STATIC_DEVICE_TABLE to a space-separated list of
@@ -1561,8 +1605,7 @@ related to a specific application, you should set variables
 To cover this requirement, Buildroot provides support for so-called
 users tables. To use this feature, set config option
 BR2_ROOTFS_USERS_TABLES to a space-separated list of users tables,
-regular text files following the makeusers syntax
-Chapter 24, Makeusers syntax documentation.
      As shown in Section 9.1, “Recommended directory structure”, the recommended location for
+regular text files following the makeusers syntax.
      As shown in Section 9.1, “Recommended directory structure”, the recommended location for
 such files is board/<company>/<boardname>/.
      It should be noted that if the custom users are related to a specific
 application, you should set variable FOO_USERS in the package’s .mk
 file instead (see Section 17.5.2, “generic-package reference”).
    9.7. Customization after the images have been created
    While post-build scripts (Section 9.5, “Customizing the generated target filesystem”) are run before
@@ -2332,8 +2375,7 @@ preferred.
    Note that such dependencies will ensure that the dependency opt
 is also enabled, but not necessarily built before your package. To do
 so, the dependency also needs to be expressed in the .mk file of the
 package.
    Further formatting details: see the
-coding style
-Section 15.1, “Config.in file”.
    17.2.4. Dependencies on target and toolchain options
    Many packages depend on certain options of the toolchain: the choice of
+coding style.
    17.2.4. Dependencies on target and toolchain options
    Many packages depend on certain options of the toolchain: the choice of
 C library, C++ support, thread support, RPC support, wchar support,
 or dynamic library support. Some packages can only be built on certain
 target architectures, or if an MMU is available in the processor.
    These dependencies have to be expressed with the appropriate depends
@@ -2483,46 +2525,35 @@ different way, using different infrastructures:
    Further formatting details: see the writing
-rules
-Section 15.2, “The .mk file”.
    17.4. The .hash file
    When possible, you must add a third file, named libfoo.hash, that
+rules.
    17.4. The .hash file
    When possible, you must add a third file, named libfoo.hash, that
 contains the hashes of the downloaded files for the libfoo
 package. The only reason for not adding a .hash file is when hash
 checking is not possible due to how the package is downloaded.
    When a package has a version selection choice, then the hash file may be
@@ -2679,7 +2710,7 @@ flags.
 The argument to be given to LIBFOO_CONFIG_SCRIPTS is the file name(s)
 of the shell script(s) needing fixing. All these names are relative to
 $(STAGING_DIR)/usr/bin and if needed multiple names can be given.
    In addition, the scripts listed in LIBFOO_CONFIG_SCRIPTS are removed
-from $(TARGET_DIR)/usr/bin, since they are not needed on the target.
    Example 17.1. Config script: divine package
    Package divine installs shell script $(STAGING_DIR)/usr/bin/divine-config.
    So its fixup would be:
    DIVINE_CONFIG_SCRIPTS = divine-config

    Example 17.2. Config script: imagemagick package:
    Package imagemagick installs the following scripts:
+from $(TARGET_DIR)/usr/bin, since they are not needed on the target.
    Example 17.1. Config script: divine package
    Package divine installs shell script $(STAGING_DIR)/usr/bin/divine-config.
    So its fixup would be:
    DIVINE_CONFIG_SCRIPTS = divine-config

    Example 17.2. Config script: imagemagick package:
    Package imagemagick installs the following scripts:
 $(STAGING_DIR)/usr/bin/{Magick,Magick++,MagickCore,MagickWand,Wand}-config
    So it’s fixup would be:
    IMAGEMAGICK_CONFIG_SCRIPTS = \
    Magick-config Magick++-config \
    MagickCore-config MagickWand-config Wand-config

    On line 14, we specify the list of dependencies this package relies
@@ -2766,8 +2797,7 @@ because two builds can never be perfectly simultaneous, and because
   itself use a different mechanism: all files of the form
   *.patch present in the package directory inside
   Buildroot will be applied to the package after extraction (see
-  patching a package
-Chapter 18, Patching a package). Finally, patches listed in
+  patching a package). Finally, patches listed in
   the LIBFOO_PATCH variable are applied before the patches stored
   in the Buildroot package directory.
 
  • 
@@ -2898,9 +2928,11 @@ because two builds can never be perfectly simultaneous, and because
 LIBFOO_DEPENDENCIES lists the dependencies (in terms of package
   name) that are required for the current target package to
   compile. These dependencies are guaranteed to be compiled and
-  installed before the configuration of the current package starts. In
-  a similar way, HOST_LIBFOO_DEPENDENCIES lists the dependencies for
-  the current host package.
+  installed before the configuration of the current package starts.
+  However, modifications to configuration of these dependencies will
+  not force a rebuild of the current package. In a similar way,
+  HOST_LIBFOO_DEPENDENCIES lists the dependencies for the current
+  host package.
 
  • 
 LIBFOO_EXTRACT_DEPENDENCIES lists the dependencies (in terms of
   package name) that are required for the current target package to be
@@ -3385,16 +3417,19 @@ built.
    • python-<something> in Buildroot. Other packages that use the
 Python build system, but are not Python modules, can freely choose
 their name (existing examples in Buildroot are scons and
-supervisor).
    In their Config.in file, they should depend on BR2_PACKAGE_PYTHON
-so that when Buildroot will enable Python 3 usage for modules, we will
-be able to enable Python modules progressively on Python 3.
    The main macro of the Python package infrastructure is
+supervisor).
    Packages that are only compatible with one version of Python (as in:
+Python 2 or Python 3) should depend on that version explicitely in
+their Config.in file (BR2_PACKAGE_PYTHON for Python 2,
+BR2_PACKAGE_PYTHON3 for Python 3).  Packages that are compatible
+with both versions should not explicitely depend on them in their
+Config.in file, since that condition is already expressed for the
+whole "External python modules" menu.
    The main macro of the Python package infrastructure is
 python-package. It is similar to the generic-package macro. It is
 also possible to create Python host packages with the
 host-python-package macro.
    Just like the generic infrastructure, the Python infrastructure works
 by defining a number of variables before calling the python-package
 or host-python-package macros.
    All the package metadata information variables that exist in the
-generic package infrastructure
-Section 17.5.2, “generic-package reference” also
+generic package infrastructure also
 exist in the Python infrastructure: PYTHON_FOO_VERSION,
 PYTHON_FOO_SOURCE, PYTHON_FOO_PATCH, PYTHON_FOO_SITE,
 PYTHON_FOO_SUBDIR, PYTHON_FOO_DEPENDENCIES, PYTHON_FOO_LICENSE,
@@ -3974,7 +4009,7 @@ user to build programs or libraries written in Rust, but it also downloads and
 manages their dependencies, to ensure repeatable builds. Cargo packages are
 called "crates".
    17.16.1. Cargo-based package’s Config.in file
    The Config.in file of Cargo-based package foo should contain:
    01: config BR2_PACKAGE_FOO
 02:     bool "foo"
-03:     depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS
+03:     depends on BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS
 04:     select BR2_PACKAGE_HOST_CARGO
 05:     help
 06:       This is a comment that explains what foo is.
@@ -4017,8 +4052,7 @@ package. Let’s start with an example:
    01: #############
 34:
 35: $(eval $(generic-package))
    The Makefile starts with the definition of the standard variables for package
 declaration (lines 7 to 11).
    As seen in line 35, it is based on the
-generic-package infrastructure
-Section 17.5.1, “generic-package tutorial”. So, it defines
+generic-package infrastructure. So, it defines
 the variables required by this particular infrastructure, where Cargo is
 invoked:
    • 
 FOO_BUILD_CMDS: Cargo is invoked to perform the build. The options required
@@ -4064,8 +4098,7 @@ automatically add a dependency on host-go to such p
 golang-package. It is similar to the generic-package macro. Only
 target packages are supported with golang-package.
      Just like the generic infrastructure, the Go infrastructure works
 by defining a number of variables before calling the golang-package.
      All the package metadata information variables that exist in the
-generic package infrastructure
-Section 17.5.2, “generic-package reference” also
+generic package infrastructure also
 exist in the Go infrastructure: FOO_VERSION, FOO_SOURCE,
 FOO_PATCH, FOO_SITE, FOO_SUBDIR, FOO_DEPENDENCIES,
 FOO_LICENSE, FOO_LICENSE_FILES, FOO_INSTALL_STAGING, etc.
      Note that it is not necessary to add host-go in the
@@ -4139,8 +4172,7 @@ builds a kernel module, and no other component:
      01: #####
 remote URI where to find the package source, licensing information.
      On line 13, we invoke the kernel-module helper infrastructure, that
 generates all the appropriate Makefile rules and variables to build
 that kernel module.
      Finally, on line 14, we invoke the
-generic-package infrastructure
-Section 17.5.1, “generic-package tutorial”.
      The dependency on linux is automatically added, so it is not needed to
+generic-package infrastructure.
      The dependency on linux is automatically added, so it is not needed to
 specify it in FOO_DEPENDENCIES.
      What you may have noticed is that, unlike other package infrastructures,
 we explicitly invoke a second infrastructure. This allows a package to
 build a kernel module, but also, if needed, use any one of other package
@@ -4225,8 +4257,7 @@ text
 
    Although Buildroot only contains one document written in AsciiDoc, there
 is, as for packages, an infrastructure for rendering documents using the
 AsciiDoc syntax.
    Also as for packages, the AsciiDoc infrastructure is available from a
-br2-external tree
-Section 9.2, “Keeping customizations outside of Buildroot”. This allows documentation for
+br2-external tree. This allows documentation for
 a br2-external tree to match the Buildroot documentation, as it will be
 rendered to the same formats and use the same layout and theme.
    17.19.1. asciidoc-document tutorial
    Whereas package infrastructures are suffixed with -package, the document
 infrastructures are suffixed with -document. So, the AsciiDoc infrastructure
@@ -4349,8 +4380,7 @@ Linux tools.
    On line 9, we specify the list of dependencies this tool reli
 dependencies are added to the Linux package dependencies list only when the
 foo tool is selected.
    The rest of the Makefile, lines 11-25 defines what should be done at the
 different steps of the Linux tool build process like for a
-generic package
-Section 17.5.1, “generic-package tutorial”. They will actually be
+generic package. They will actually be
 used only when the foo tool is selected. The only supported commands are
 _BUILD_CMDS, _INSTALL_STAGING_CMDS and _INSTALL_TARGET_CMDS.
    Note. One must not call $(eval $(generic-package)) or any other
 package infrastructure! Linux tools are not packages by themselves,
@@ -4391,8 +4421,7 @@ the Linux kernel tree; this is specific to the linux extension and can
 use the variables defined by the foo package, like: $(FOO_DIR) or
 $(FOO_VERSION)… as well as all the Linux variables, like:
 $(LINUX_VERSION) or $(LINUX_VERSION_PROBED), $(KERNEL_ARCH)…
-See the definition of those kernel variables
-Section 17.18.2, “kernel-module reference”.
    17.21. Hooks available in the various build steps
    The generic infrastructure (and as a result also the derived autotools
+See the definition of those kernel variables.
    17.21. Hooks available in the various build steps
    The generic infrastructure (and as a result also the derived autotools
 and cmake infrastructures) allow packages to specify hooks.
 These define further actions to perform after existing steps.
 Most hooks aren’t really useful for generic packages, since the .mk
@@ -4816,7 +4845,7 @@ Send the fix to the Buildroot mailing list (see
     can be removed.
     In the commit message of a patch fixing an autobuild failure, add a
     reference to the build result directory, as follows:
-
    Fixes http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
    21.3. Reviewing and testing patches
    With the amount of patches sent to the mailing list each day, the
+
    Fixes: http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
    21.3. Reviewing and testing patches
    With the amount of patches sent to the mailing list each day, the
 maintainer has a very hard job to judge which patches are ready to apply
 and which ones aren’t. Contributors can greatly help here by reviewing
 and testing these patches.
    In the review process, do not hesitate to respond to patch submissions
@@ -4961,7 +4990,6 @@ options that no longer exist or are no longer needed.
    If you are intereste
 further changes in the packages you added or modified, please add
 yourself to the DEVELOPERS file. This should be done in the same patch
 creating or modifying the package. See the DEVELOPERS file
-Chapter 22, DEVELOPERS file and get-developers
 for more information.
    Buildroot provides a handy tool to check for common coding style
 mistakes on files you created or modified, called check-package (see
 Section 17.23.2, “How to check the coding style” for more information).
    21.5.2. Preparing a patch series
    Starting from the changes committed in your local git view, rebase
@@ -4988,7 +5016,7 @@ large number of commits in the series;
 
  • 
 deep impact of the changes in the rest of the project;
 
  • 
-RFC [4];
+RFC [4];
 
  • 
 whenever you feel it will help presenting your work, your choices,
   the review process, etc.
@@ -5012,7 +5040,7 @@ the problem is complex, it is OK to add more paragraphs. All paragraphs
 should be wrapped at 72 characters.
 
 A paragraph that explains the root cause of the problem. Again, more
-than on paragraph is OK.
+than one paragraph is OK.
 
 Finally, one or more paragraphs that explain how the problem is solved.
 Don't hesitate to explain complex solutions in detail.
@@ -5043,13 +5071,10 @@ can be found under the "Message Id" tag on
 patchwork.  The advantage of
 in-reply-to is that patchwork will automatically mark the previous
 version of the patch as superseded.
    • 21.6. Reporting issues/bugs or getting help
    Before reporting any issue, please check in
-the mailing list archive
-Chapter 5, Community resources whether someone has
+the mailing list archive whether someone has
 already reported and/or fixed a similar problem.
    However you choose to report bugs or get help, either by
-opening a bug in the bug tracker
-Chapter 5, Community resources or by
-sending a mail to the mailing list
-Chapter 5, Community resources, there are
+opening a bug in the bug tracker or by
+sending a mail to the mailing list, there are
 a number of details to provide in order to help people reproduce and
 find a solution to the issue.
    Try to think as if you were trying to help someone else; in
 that case, what would you need?
    Here is a short list of details to provide in such case:
    • 
@@ -5070,7 +5095,7 @@ pastebin service. Note that not all available pastebin services will
 preserve Unix-style line terminators when downloading raw pastes.
 Following pastebin services are known to work correctly:
 - https://gist.github.com/
-- http://code.bulix.org/

    [4] RFC: (Request for comments) change proposal
    Chapter 22. DEVELOPERS file and get-developers
    The main Buildroot directory contains a file named DEVELOPERS that
+- http://code.bulix.org/

    [4] RFC: (Request for comments) change proposal
    Chapter 22. DEVELOPERS file and get-developers
    The main Buildroot directory contains a file named DEVELOPERS that
 lists the developers involved with various areas of Buildroot. Thanks
 to this file, the get-developers tool allows to:
    • 
 Calculate the list of developers to whom patches should be sent, by
diff --git a/buildroot/docs/manual/manual.pdf b/buildroot/docs/manual/manual.pdf
index 76215b7e6..f1729b909 100644
Binary files a/buildroot/docs/manual/manual.pdf and b/buildroot/docs/manual/manual.pdf differ
diff --git a/buildroot/docs/manual/manual.text b/buildroot/docs/manual/manual.text
index 545202cd9..0ec6817fc 100644
--- a/buildroot/docs/manual/manual.text
+++ b/buildroot/docs/manual/manual.text
@@ -161,13 +161,13 @@ List of Examples
 
 ---------------------------------------------------------------------
 
-Buildroot 2019.02.3 manual generated on 2019-06-07 07:39:18 UTC from
-git revision 3e8b918b87
+Buildroot 2019.02.9 manual generated on 2020-01-12 15:28:51 UTC from
+git revision 24f25c8d23
 
 The Buildroot manual is written by the Buildroot developers. It is
 licensed under the GNU General Public License, version 2. Refer to
 the COPYING [http://git.buildroot.org/buildroot/tree/COPYING?id=
-3e8b918b871f484b3ef57832aa41982e368d74c2] file in the Buildroot
+24f25c8d23bd85d57b6e9c776f2c7716f2ddd4af] file in the Buildroot
 sources for the full text of this license.
 
 Copyright © 2004-2019 The Buildroot developers
@@ -362,9 +362,8 @@ All of these "make" commands will need to build a configuration
 utility (including the interface), so you may need to install
 "development" packages for relevant libraries used by the
 configuration utilities. Refer to Chapter 2, System requirements for
-more details, specifically the optional requirements Section 2.2,
-“Optional packages” to get the dependencies of your favorite
-interface.
+more details, specifically the optional requirements to get the
+dependencies of your favorite interface.
 
 For each menu entry in the configuration tool, you can find
 associated help that describes the purpose of the entry. Refer to
@@ -404,15 +403,21 @@ directory contains several subdirectories:
     needed by Buildroot on the host and packages compiled for the
     target). This directory contains one subdirectory for each of
     these components.
-  * staging/ which contains a hierarchy similar to a root filesystem
-    hierarchy. This directory contains the headers and libraries of
-    the cross-compilation toolchain and all the userspace packages
-    selected for the target. However, this directory is not intended
-    to be the root filesystem for the target: it contains a lot of
-    development files, unstripped binaries and libraries that make it
-    far too big for an embedded system. These development files are
-    used to compile libraries and applications for the target that
-    depend on other libraries.
+  * host/ contains both the tools built for the host, and the sysroot
+    of the target toolchain. The former is an installation of tools
+    compiled for the host that are needed for the proper execution of
+    Buildroot, including the cross-compilation toolchain. The latter
+    is a hierarchy similar to a root filesystem hierarchy. It
+    contains the headers and libraries of all user-space packages
+    that provide and install libraries used by other packages.
+    However, this directory is not intended to be the root filesystem
+    for the target: it contains a lot of development files,
+    unstripped binaries and libraries that make it far too big for an
+    embedded system. These development files are used to compile
+    libraries and applications for the target that depend on other
+    libraries.
+  * staging/ is a symlink to the target toolchain sysroot inside host
+    /, which exists for backwards compatibility.
   * target/ which contains almost the complete root filesystem for
     the target: everything needed is present except the device files
     in /dev/ (Buildroot can’t create them because Buildroot doesn’t
@@ -426,9 +431,6 @@ directory contains several subdirectories:
     /, target/ contains only the files and libraries needed to run
     the selected target applications: the development files (headers,
     etc.) are not present, the binaries are stripped.
-  * host/ contains the installation of tools compiled for the host
-    that are needed for the proper execution of Buildroot, including
-    the cross-compilation toolchain.
 
 These commands, make menuconfig|nconfig|gconfig|xconfig and make, are
 the basic ones that allow to easily and quickly generate images
@@ -765,9 +767,9 @@ Buildroot or crosstool-NG.
 
 If you want to generate a custom toolchain for your project, that can
 be used as an external toolchain in Buildroot, our recommendation is
-definitely to build it with crosstool-NG [http://crosstool-ng.org].
-We recommend to build the toolchain separately from Buildroot, and
-then import it in Buildroot using the external toolchain backend.
+to build it either with Buildroot itself (see Section 6.1.3, “Build
+an external toolchain with Buildroot”) or with crosstool-NG [http://
+crosstool-ng.org].
 
 Advantages of this backend:
 
@@ -781,9 +783,45 @@ Drawbacks of this backend:
 
   * If your pre-built external toolchain has a bug, may be hard to
     get a fix from the toolchain vendor, unless you build your
-    external toolchain by yourself using Crosstool-NG.
+    external toolchain by yourself using Buildroot or Crosstool-NG.
 
-6.1.2.1. External toolchain wrapper
+6.1.3. Build an external toolchain with Buildroot
+
+The Buildroot internal toolchain option can be used to create an
+external toolchain. Here are a series of steps to build an internal
+toolchain and package it up for reuse by Buildroot itself (or other
+projects).
+
+Create a new Buildroot configuration, with the following details:
+
+  * Select the appropriate Target options for your target CPU
+    architecture
+  * In the Toolchain menu, keep the default of Buildroot toolchain
+    for Toolchain type, and configure your toolchain as desired
+  * In the System configuration menu, select None as the Init system
+    and none as /bin/sh
+  * In the Target packages menu, disable BusyBox
+  * In the Filesystem images menu, disable tar the root filesystem
+
+Then, we can trigger the build, and also ask Buildroot to generate a
+SDK. This will conveniently generate for us a tarball which contains
+our toolchain:
+
+make sdk
+
+This produces the SDK tarball in $(O)/images, with a name similar to
+arm-buildroot-linux-uclibcgnueabi_sdk-buildroot.tar.gz. Save this
+tarball, as it is now the toolchain that you can re-use as an
+external toolchain in other Buildroot projects.
+
+In those other Buildroot projects, in the Toolchain menu:
+
+  * Set Toolchain type to External toolchain
+  * Set Toolchain to Custom toolchain
+  * Set Toolchain origin to Toolchain to be downloaded and installed
+  * Set Toolchain URL to file:///path/to/your/sdk/tarball.tar.gz
+
+6.1.3.1. External toolchain wrapper
 
 When using an external toolchain, Buildroot generates a wrapper
 program, that transparently passes the appropriate options (according
@@ -1159,6 +1197,15 @@ can help you understand how to work with Buildroot:
     overlay, a post-build script or a post-image script are made,
     there is no need for a full rebuild: a simple make invocation
     will take the changes into account.
+  * When a package listed in FOO_DEPENDENCIES is rebuilt or removed,
+    the package foo is not automatically rebuilt. For example, if a
+    package bar is listed in FOO_DEPENDENCIES with FOO_DEPENDENCIES =
+    bar and the configuration of the bar package is changed, the
+    configuration change would not result in a rebuild of package foo
+    automatically. In this scenario, you may need to either rebuild
+    any packages in your build which reference bar in their
+    DEPENDENCIES, or perform a full rebuild to ensure any bar
+    dependent packages are up to date.
 
 Generally speaking, when you’re facing a build error and you’re
 unsure of the potential consequences of the configuration changes
@@ -1193,15 +1240,21 @@ command.
 
 On the other hand, if you only want to restart the build process of a
 package from its compilation step, you can run make 
--rebuild, followed by make or make . It will restart the
-compilation and installation of the package, but not from scratch: it
-basically re-executes make and make install inside the package, so it
-will only rebuild files that changed.
+-rebuild. It will restart the compilation and installation of the
+package, but not from scratch: it basically re-executes make and make
+install inside the package, so it will only rebuild files that
+changed.
 
 If you want to restart the build process of a package from its
-configuration step, you can run make -reconfigure, followed
-by make or make . It will restart the configuration,
-compilation and installation of the package.
+configuration step, you can run make -reconfigure. It will
+restart the configuration, compilation and installation of the
+package.
+
+While -rebuild implies -reinstall and 
+-reconfigure implies -rebuild, these targets as well as
+ only act on the said package, and do not trigger
+re-creating the root filesystem image. If re-creating the root
+filesystem in necessary, one should in addition run make or make all.
 
 Internally, Buildroot creates so-called stamp files to keep track of
 which build steps have been completed for each package. They are
@@ -1469,10 +1522,10 @@ installed (python-matplotlib on most distributions), and also the
 argparse module if you’re using a Python version older than 2.7
 (python-argparse on most distributions).
 
-Just like for the duration graph, a BR2_GRAPH_OUT environment is
-supported to adjust the output file format. See Section 8.8,
-“Graphing the dependencies between packages” for details about this
-environment variable.
+Just like for the duration graph, a BR2_GRAPH_OUT environment
+variable is supported to adjust the output file format. See
+Section 8.8, “Graphing the dependencies between packages” for details
+about this environment variable.
 
 Note. The collected filesystem size data is only meaningful after a
 complete clean rebuild. Be sure to run make clean all before using
@@ -1738,10 +1791,8 @@ Additionally, there are some other useful make targets:
 |     graph-depends     |Generate a dependency graph of the  |
 |                       |package, in the context of the      |
 |                       |current Buildroot configuration. See|
-|                       |this section Section 8.8, “Graphing |
-|                       |the dependencies between packages”  |
-|                       |for more details about dependency   |
-|                       |graphs.                             |
+|                       |this section for more details about |
+|                       |dependency graphs.                  |
 |-----------------------+------------------------------------|
 |    graph-rdepends     |Generate a graph of this package    |
 |                       |reverse dependencies (i.e the       |
@@ -1864,6 +1915,15 @@ WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
         --exclude WebDriverTests --exclude WebKitBuild --exclude WebKitLibraries \
         --exclude WebKit.xcworkspace --exclude Websites --exclude Examples
 
+By default, Buildroot skips syncing of VCS artifacts (e.g., the .git
+and .svn directories). Some packages prefer to have these VCS
+directories available during build, for example for automatically
+determining a precise commit reference for version information. To
+undo this built-in filtering at a cost of a slower speed, add these
+directories back:
+
+LINUX_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = --include .git
+
 Chapter 9. Project-specific customization
 
 Typical actions you may need to perform for a given project are:
@@ -2531,8 +2591,7 @@ from the post-build script.
 Instead, Buildroot provides support for so-called permission tables.
 To use this feature, set config option BR2_ROOTFS_DEVICE_TABLE to a
 space-separated list of permission tables, regular text files
-following the makedev syntax Chapter 23, Makedev syntax documentation
-.
+following the makedev syntax.
 
 If you are using a static device table (i.e. not using devtmpfs,
 mdev, or (e)udev) then you can add device nodes using the same
@@ -2554,8 +2613,7 @@ Sometimes it is needed to add specific users in the target system. To
 cover this requirement, Buildroot provides support for so-called 
 users tables. To use this feature, set config option
 BR2_ROOTFS_USERS_TABLES to a space-separated list of users tables,
-regular text files following the makeusers syntax Chapter 24, 
-Makeusers syntax documentation.
+regular text files following the makeusers syntax.
 
 As shown in Section 9.1, “Recommended directory structure”, the
 recommended location for such files is board///.
@@ -3664,8 +3722,7 @@ also enabled, but not necessarily built before your package. To do
 so, the dependency also needs to be expressed in the .mk file of the
 package.
 
-Further formatting details: see the coding style Section 15.1,
-“Config.in file”.
+Further formatting details: see the coding style.
 
 17.2.4. Dependencies on target and toolchain options
 
@@ -3849,36 +3906,27 @@ different way, using different infrastructures:
     infrastructure must be used for all packages that do not use the
     autotools as their build system. In the future, other specialized
     infrastructures might be written for other build systems. We
-    cover them through in a tutorial Section 17.5.1, “generic-package
-    tutorial” and a reference Section 17.5.2, “generic-package
-    reference”.
+    cover them through in a tutorial and a reference.
   * Makefiles for autotools-based software (autoconf, automake,
     etc.): We provide a dedicated infrastructure for such packages,
     since autotools is a very common build system. This
     infrastructure must be used for new packages that rely on the
     autotools as their build system. We cover them through a tutorial
-    Section 17.6.1, “autotools-package tutorial” and reference
-    Section 17.6.2, “autotools-package reference”.
+    and reference.
   * Makefiles for cmake-based software: We provide a dedicated
     infrastructure for such packages, as CMake is a more and more
     commonly used build system and has a standardized behaviour. This
     infrastructure must be used for new packages that rely on CMake.
-    We cover them through a tutorial Section 17.7.1, “cmake-package
-    tutorial” and reference Section 17.7.2, “cmake-package reference”
-    .
+    We cover them through a tutorial and reference.
   * Makefiles for Python modules: We have a dedicated infrastructure
     for Python modules that use either the distutils or the
-    setuptools mechanism. We cover them through a tutorial
-    Section 17.8.1, “python-package tutorial” and a reference
-    Section 17.8.2, “python-package reference”.
+    setuptools mechanism. We cover them through a tutorial and a
+    reference.
   * Makefiles for Lua modules: We have a dedicated infrastructure for
     Lua modules available through the LuaRocks web site. We cover
-    them through a tutorial Section 17.9.1, “luarocks-package
-    tutorial” and a reference Section 17.9.2, “luarocks-package
-    reference”.
+    them through a tutorial and a reference.
 
-Further formatting details: see the writing rules Section 15.2, “The
-.mk file”.
+Further formatting details: see the writing rules.
 
 17.4. The .hash file
 
@@ -4220,9 +4268,9 @@ information is (assuming the package name is libfoo) :
     are included in Buildroot itself use a different mechanism: all
     files of the form *.patch present in the package directory inside
     Buildroot will be applied to the package after extraction (see
-    patching a package Chapter 18, Patching a package). Finally,
-    patches listed in the LIBFOO_PATCH variable are applied before
-    the patches stored in the Buildroot package directory.
+    patching a package). Finally, patches listed in the LIBFOO_PATCH
+    variable are applied before the patches stored in the Buildroot
+    package directory.
   * LIBFOO_SITE provides the location of the package, which can be a
     URL or a local filesystem path. HTTP, FTP and SCP are supported
     URL types for retrieving package tarballs. In these cases don’t
@@ -4330,8 +4378,10 @@ information is (assuming the package name is libfoo) :
     name) that are required for the current target package to
     compile. These dependencies are guaranteed to be compiled and
     installed before the configuration of the current package starts.
-    In a similar way, HOST_LIBFOO_DEPENDENCIES lists the dependencies
-    for the current host package.
+    However, modifications to configuration of these dependencies
+    will not force a rebuild of the current package. In a similar
+    way, HOST_LIBFOO_DEPENDENCIES lists the dependencies for the
+    current host package.
   * LIBFOO_EXTRACT_DEPENDENCIES lists the dependencies (in terms of
     package name) that are required for the current target package to
     be extracted. These dependencies are guaranteed to be compiled
@@ -4881,9 +4931,13 @@ be named python- in Buildroot. Other packages that use the
 Python build system, but are not Python modules, can freely choose
 their name (existing examples in Buildroot are scons and supervisor).
 
-In their Config.in file, they should depend on BR2_PACKAGE_PYTHON so
-that when Buildroot will enable Python 3 usage for modules, we will
-be able to enable Python modules progressively on Python 3.
+Packages that are only compatible with one version of Python (as in:
+Python 2 or Python 3) should depend on that version explicitely in
+their Config.in file (BR2_PACKAGE_PYTHON for Python 2,
+BR2_PACKAGE_PYTHON3 for Python 3). Packages that are compatible with
+both versions should not explicitely depend on them in their
+Config.in file, since that condition is already expressed for the
+whole "External python modules" menu.
 
 The main macro of the Python package infrastructure is
 python-package. It is similar to the generic-package macro. It is
@@ -4895,12 +4949,11 @@ by defining a number of variables before calling the python-package
 or host-python-package macros.
 
 All the package metadata information variables that exist in the
-generic package infrastructure Section 17.5.2, “generic-package
-reference” also exist in the Python infrastructure:
-PYTHON_FOO_VERSION, PYTHON_FOO_SOURCE, PYTHON_FOO_PATCH,
-PYTHON_FOO_SITE, PYTHON_FOO_SUBDIR, PYTHON_FOO_DEPENDENCIES,
-PYTHON_FOO_LICENSE, PYTHON_FOO_LICENSE_FILES,
-PYTHON_FOO_INSTALL_STAGING, etc.
+generic package infrastructure also exist in the Python
+infrastructure: PYTHON_FOO_VERSION, PYTHON_FOO_SOURCE,
+PYTHON_FOO_PATCH, PYTHON_FOO_SITE, PYTHON_FOO_SUBDIR,
+PYTHON_FOO_DEPENDENCIES, PYTHON_FOO_LICENSE,
+PYTHON_FOO_LICENSE_FILES, PYTHON_FOO_INSTALL_STAGING, etc.
 
 Note that:
 
@@ -5765,7 +5818,7 @@ The Config.in file of Cargo-based package foo should contain:
 
 01: config BR2_PACKAGE_FOO
 02:     bool "foo"
-03:     depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS
+03:     depends on BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS
 04:     select BR2_PACKAGE_HOST_CARGO
 05:     help
 06:       This is a comment that explains what foo is.
@@ -5818,9 +5871,8 @@ The Makefile starts with the definition of the standard variables for
 package declaration (lines 7 to 11).
 
 As seen in line 35, it is based on the generic-package infrastructure
-Section 17.5.1, “generic-package tutorial”. So, it defines the
-variables required by this particular infrastructure, where Cargo is
-invoked:
+. So, it defines the variables required by this particular
+infrastructure, where Cargo is invoked:
 
   * FOO_BUILD_CMDS: Cargo is invoked to perform the build. The
     options required to configure the cross-compilation of the
@@ -5903,10 +5955,10 @@ Just like the generic infrastructure, the Go infrastructure works by
 defining a number of variables before calling the golang-package.
 
 All the package metadata information variables that exist in the
-generic package infrastructure Section 17.5.2, “generic-package
-reference” also exist in the Go infrastructure: FOO_VERSION,
-FOO_SOURCE, FOO_PATCH, FOO_SITE, FOO_SUBDIR, FOO_DEPENDENCIES,
-FOO_LICENSE, FOO_LICENSE_FILES, FOO_INSTALL_STAGING, etc.
+generic package infrastructure also exist in the Go infrastructure:
+FOO_VERSION, FOO_SOURCE, FOO_PATCH, FOO_SITE, FOO_SUBDIR,
+FOO_DEPENDENCIES, FOO_LICENSE, FOO_LICENSE_FILES,
+FOO_INSTALL_STAGING, etc.
 
 Note that it is not necessary to add host-go in the FOO_DEPENDENCIES
 variable of a package, since this basic dependency is automatically
@@ -5995,8 +6047,7 @@ On line 13, we invoke the kernel-module helper infrastructure, that
 generates all the appropriate Makefile rules and variables to build
 that kernel module.
 
-Finally, on line 14, we invoke the generic-package infrastructure
-Section 17.5.1, “generic-package tutorial”.
+Finally, on line 14, we invoke the generic-package infrastructure.
 
 The dependency on linux is automatically added, so it is not needed
 to specify it in FOO_DEPENDENCIES.
@@ -6108,10 +6159,9 @@ there is, as for packages, an infrastructure for rendering documents
 using the AsciiDoc syntax.
 
 Also as for packages, the AsciiDoc infrastructure is available from a
-br2-external tree Section 9.2, “Keeping customizations outside of
-Buildroot”. This allows documentation for a br2-external tree to
-match the Buildroot documentation, as it will be rendered to the same
-formats and use the same layout and theme.
+br2-external tree. This allows documentation for a br2-external tree
+to match the Buildroot documentation, as it will be rendered to the
+same formats and use the same layout and theme.
 
 17.19.1. asciidoc-document tutorial
 
@@ -6282,10 +6332,9 @@ only when the foo tool is selected.
 
 The rest of the Makefile, lines 11-25 defines what should be done at
 the different steps of the Linux tool build process like for a
-generic package Section 17.5.1, “generic-package tutorial”. They will
-actually be used only when the foo tool is selected. The only
-supported commands are _BUILD_CMDS, _INSTALL_STAGING_CMDS and
-_INSTALL_TARGET_CMDS.
+generic package. They will actually be used only when the foo tool is
+selected. The only supported commands are _BUILD_CMDS,
+_INSTALL_STAGING_CMDS and _INSTALL_TARGET_CMDS.
 
 Note. One must not call $(eval $(generic-package)) or any other
 package infrastructure! Linux tools are not packages by themselves,
@@ -6346,8 +6395,7 @@ modify the Linux kernel tree; this is specific to the linux extension
 and can use the variables defined by the foo package, like: $
 (FOO_DIR) or $(FOO_VERSION)… as well as all the Linux variables,
 like: $(LINUX_VERSION) or $(LINUX_VERSION_PROBED), $(KERNEL_ARCH)…
-See the definition of those kernel variables Section 17.18.2,
-“kernel-module reference”.
+See the definition of those kernel variables.
 
 17.21. Hooks available in the various build steps
 
@@ -6937,7 +6985,7 @@ basically two things that can be done:
         patch fixing an autobuild failure, add a reference to the
         build result directory, as follows:
 
-Fixes http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
+Fixes: http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069
 
 21.3. Reviewing and testing patches
 
@@ -7135,8 +7183,8 @@ options that no longer exist or are no longer needed.
 If you are interested in getting notified of build failures and of
 further changes in the packages you added or modified, please add
 yourself to the DEVELOPERS file. This should be done in the same
-patch creating or modifying the package. See the DEVELOPERS file
-Chapter 22, DEVELOPERS file and get-developers for more information.
+patch creating or modifying the package. See the DEVELOPERS file for
+more information.
 
 Buildroot provides a handy tool to check for common coding style
 mistakes on files you created or modified, called check-package (see
@@ -7244,7 +7292,7 @@ the problem is complex, it is OK to add more paragraphs. All paragraphs
 should be wrapped at 72 characters.
 
 A paragraph that explains the root cause of the problem. Again, more
-than on paragraph is OK.
+than one paragraph is OK.
 
 Finally, one or more paragraphs that explain how the problem is solved.
 Don't hesitate to explain complex solutions in detail.
@@ -7294,14 +7342,12 @@ as superseded.
 21.6. Reporting issues/bugs or getting help
 
 Before reporting any issue, please check in the mailing list archive
-Chapter 5, Community resources whether someone has already reported
-and/or fixed a similar problem.
+whether someone has already reported and/or fixed a similar problem.
 
 However you choose to report bugs or get help, either by opening a
-bug in the bug tracker Chapter 5, Community resources or by sending a
-mail to the mailing list Chapter 5, Community resources, there are a
-number of details to provide in order to help people reproduce and
-find a solution to the issue.
+bug in the bug tracker or by sending a mail to the mailing list,
+there are a number of details to provide in order to help people
+reproduce and find a solution to the issue.
 
 Try to think as if you were trying to help someone else; in that
 case, what would you need?
diff --git a/buildroot/docs/manual/quickstart.txt b/buildroot/docs/manual/quickstart.txt
index 74158ae24..542b27860 100644
--- a/buildroot/docs/manual/quickstart.txt
+++ b/buildroot/docs/manual/quickstart.txt
@@ -87,15 +87,21 @@ This directory contains several subdirectories:
   target). This directory contains one subdirectory for each of these
   components.
 
-* +staging/+ which contains a hierarchy similar to a root filesystem
-  hierarchy. This directory contains the headers and libraries of the
-  cross-compilation toolchain and all the userspace packages selected
-  for the target. However, this directory is 'not' intended to be
-  the root filesystem for the target: it contains a lot of development
-  files, unstripped binaries and libraries that make it far too big
-  for an embedded system. These development files are used to compile
-  libraries and applications for the target that depend on other
-  libraries.
+* +host/+ contains both the tools built for the host, and the sysroot
+  of the target toolchain. The former is an installation of tools
+  compiled for the host that are needed for the proper execution of
+  Buildroot, including the cross-compilation toolchain. The latter
+  is a hierarchy similar to a root filesystem hierarchy. It contains
+  the headers and libraries of all user-space packages that provide
+  and install libraries used by other packages. However, this
+  directory is 'not' intended to be the root filesystem for the target:
+  it contains a lot of development files, unstripped binaries and
+  libraries that make it far too big for an embedded system. These
+  development files are used to compile libraries and applications for
+  the target that depend on other libraries.
+
+* +staging/+ is a symlink to the target toolchain sysroot inside
+  +host/+, which exists for backwards compatibility.
 
 * +target/+ which contains 'almost' the complete root filesystem for
   the target: everything needed is present except the device files in
@@ -111,10 +117,6 @@ This directory contains several subdirectories:
   development files (headers, etc.) are not present, the binaries are
   stripped.
 
-* +host/+ contains the installation of tools compiled for the host
-  that are needed for the proper execution of Buildroot, including the
-  cross-compilation toolchain.
-
 These commands, +make menuconfig|nconfig|gconfig|xconfig+ and +make+, are the
 basic ones that allow to easily and quickly generate images fitting
 your needs, with all the features and applications you enabled.
diff --git a/buildroot/docs/manual/rebuilding-packages.txt b/buildroot/docs/manual/rebuilding-packages.txt
index 6faa67adc..06d385514 100644
--- a/buildroot/docs/manual/rebuilding-packages.txt
+++ b/buildroot/docs/manual/rebuilding-packages.txt
@@ -65,6 +65,16 @@ can help you understand how to work with Buildroot:
    there is no need for a full rebuild: a simple +make+ invocation
    will take the changes into account.
 
+ * When a package listed in +FOO_DEPENDENCIES+ is rebuilt or removed,
+   the package +foo+ is not automatically rebuilt. For example, if a
+   package +bar+ is listed in +FOO_DEPENDENCIES+ with +FOO_DEPENDENCIES
+   = bar+ and the configuration of the +bar+ package is changed, the
+   configuration change would not result in a rebuild of package +foo+
+   automatically. In this scenario, you may need to either rebuild any
+   packages in your build which reference +bar+ in their +DEPENDENCIES+,
+   or perform a full rebuild to ensure any +bar+ dependent packages are
+   up to date.
+
 Generally speaking, when you're facing a build error and you're unsure
 of the potential consequences of the configuration changes you've
 made, do a full rebuild. If you get the same build error, then you are
@@ -99,16 +109,20 @@ re-configure, re-compile and re-install this package from scratch. You
 can ask buildroot to do this with the +make -dirclean+ command.
 
 On the other hand, if you only want to restart the build process of a
-package from its compilation step, you can run +make
--rebuild+, followed by +make+ or +make +. It will
-restart the compilation and installation of the package, but not from
-scratch: it basically re-executes +make+ and +make install+
-inside the package, so it will only rebuild files that changed.
+package from its compilation step, you can run +make -rebuild+. It
+will restart the compilation and installation of the package, but not from
+scratch: it basically re-executes +make+ and +make install+ inside the package,
+so it will only rebuild files that changed.
 
-If you want to restart the build process of a package from its
-configuration step, you can run +make -reconfigure+, followed
-by +make+ or +make +. It will restart the configuration,
-compilation and installation of the package.
+If you want to restart the build process of a package from its configuration
+step, you can run +make -reconfigure+. It will restart the
+configuration, compilation and installation of the package.
+
+While +-rebuild+ implies +-reinstall+ and
++-reconfigure+ implies +-rebuild+, these targets as well
+as ++ only act on the said package, and do not trigger re-creating
+the root filesystem image. If re-creating the root filesystem in necessary,
+one should in addition run +make+ or +make all+.
 
 Internally, Buildroot creates so-called _stamp files_ to keep track of
 which build steps have been completed for each package. They are
diff --git a/buildroot/docs/manual/using-buildroot-development.txt b/buildroot/docs/manual/using-buildroot-development.txt
index 65a9f1a3f..da6dd822f 100644
--- a/buildroot/docs/manual/using-buildroot-development.txt
+++ b/buildroot/docs/manual/using-buildroot-development.txt
@@ -109,3 +109,13 @@ WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
 	--exclude WebDriverTests --exclude WebKitBuild --exclude WebKitLibraries \
 	--exclude WebKit.xcworkspace --exclude Websites --exclude Examples
 ------------------
+
+By default, Buildroot skips syncing of VCS artifacts (e.g., the *.git* and
+*.svn* directories). Some packages prefer to have these VCS directories
+available during build, for example for automatically determining a precise
+commit reference for version information. To undo this built-in filtering at a
+cost of a slower speed, add these directories back:
+
+------------------
+LINUX_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = --include .git
+------------------
diff --git a/buildroot/fs/common.mk b/buildroot/fs/common.mk
index b361ecce2..34849e698 100644
--- a/buildroot/fs/common.mk
+++ b/buildroot/fs/common.mk
@@ -82,7 +82,7 @@ ROOTFS_$(2)_DEPENDENCIES += rootfs-common
 
 ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
 ROOTFS_$(2)_COMPRESS_EXT = .gz
-ROOTFS_$(2)_COMPRESS_CMD = gzip -9 -c
+ROOTFS_$(2)_COMPRESS_CMD = gzip -9 -c -n
 endif
 ifeq ($$(BR2_TARGET_ROOTFS_$(2)_BZIP2),y)
 ROOTFS_$(2)_COMPRESS_EXT = .bz2
diff --git a/buildroot/fs/tar/tar.mk b/buildroot/fs/tar/tar.mk
index 4c6327ace..393d01bfe 100644
--- a/buildroot/fs/tar/tar.mk
+++ b/buildroot/fs/tar/tar.mk
@@ -8,6 +8,9 @@ TAR_OPTS := $(call qstrip,$(BR2_TARGET_ROOTFS_TAR_OPTIONS))
 
 ROOTFS_TAR_DEPENDENCIES = $(BR2_TAR_HOST_DEPENDENCY)
 
+# do not store atime/ctime in PaxHeaders to ensure reproducbility
+TAR_OPTS += --pax-option=exthdr.name=%d/PaxHeaders/%f,atime:=0,ctime:=0
+
 define ROOTFS_TAR_CMD
 	(cd $(TARGET_DIR); find -print0 | LC_ALL=C sort -z | \
 		tar $(TAR_OPTS) -cf $@ --null --xattrs-include='*' --no-recursion -T - --numeric-owner)
diff --git a/buildroot/linux/Config.in b/buildroot/linux/Config.in
index 6f93c2122..6c1d172be 100644
--- a/buildroot/linux/Config.in
+++ b/buildroot/linux/Config.in
@@ -122,7 +122,7 @@ endif
 
 config BR2_LINUX_KERNEL_VERSION
 	string
-	default "4.19.47" if BR2_LINUX_KERNEL_LATEST_VERSION
+	default "4.19.94" if BR2_LINUX_KERNEL_LATEST_VERSION
 	default "v4.4.176-cip31" if BR2_LINUX_KERNEL_LATEST_CIP_VERSION
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
 		if BR2_LINUX_KERNEL_CUSTOM_VERSION
diff --git a/buildroot/linux/linux.hash b/buildroot/linux/linux.hash
index 1f580c86c..7d72e4357 100644
--- a/buildroot/linux/linux.hash
+++ b/buildroot/linux/linux.hash
@@ -1,6 +1,6 @@
 # From https://www.kernel.org/pub/linux/kernel/v4.x/sha256sums.asc
 sha256 d011245629b980d4c15febf080b54804aaf215167b514a3577feddb2495f8a3e  linux-4.20.17.tar.xz
-sha256 5d08f3890e7ca2b94529675120f170c5b764f795e6dd184a1190c23a40ef5365  linux-4.19.47.tar.xz
-sha256 25f58cb56bde388ac9bcee984f5f2d0ca094b0a8af6b92ad1f5b2fd0e6725b85  linux-4.14.123.tar.xz
-sha256 d25a490d62a3e96a587333e163862585eac4086fc8d4893b4ec1711e7d387c5f  linux-4.9.180.tar.xz
-sha256 1a450217d381bb7fd259d026d3b7a57c717e8d1f66754cd6fcc9df3c4a8a6a7a  linux-4.4.180.tar.xz
+sha256 5899ff2a85e2b84607148349fd8e646f94399655caf0e4e55d1eb0567e48520e  linux-4.4.208.tar.xz
+sha256 b7ad1c9841d671d026c55a4c91c77205f8b488ca5f980f838591c68662e0525a  linux-4.9.208.tar.xz
+sha256 eb29cc9cfd54158789064b3d6e5b3eab108facec048b8d405a63e9863329b049  linux-4.14.163.tar.xz
+sha256 c62a10a75a7c4213e41287040e7c7509b7d42117d6830feb7dfe505949fa7467  linux-4.19.94.tar.xz
diff --git a/buildroot/linux/linux.mk b/buildroot/linux/linux.mk
index dd182d06b..a1378345c 100644
--- a/buildroot/linux/linux.mk
+++ b/buildroot/linux/linux.mk
@@ -316,6 +316,8 @@ define LINUX_KCONFIG_FIXUP_CMDS
 	$(LINUX_FIXUP_CONFIG_ENDIANNESS)
 	$(if $(BR2_arm)$(BR2_armeb),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_AEABI,$(@D)/.config))
+	$(if $(BR2_powerpc)$(BR2_powerpc64)$(BR2_powerpc64le),
+		$(call KCONFIG_ENABLE_OPT,CONFIG_PPC_DISABLE_WERROR,$(@D)/.config))
 	$(if $(BR2_TARGET_ROOTFS_CPIO),
 		$(call KCONFIG_ENABLE_OPT,CONFIG_BLK_DEV_INITRD,$(@D)/.config))
 	# As the kernel gets compiled before root filesystems are
diff --git a/buildroot/package/Config.in b/buildroot/package/Config.in
index cc232b9fb..ce6745348 100644
--- a/buildroot/package/Config.in
+++ b/buildroot/package/Config.in
@@ -1042,7 +1042,7 @@ menu "External python modules"
 	source "package/python-slob/Config.in"
 	source "package/python-smbus-cffi/Config.in"
 	source "package/python-socketio/Config.in"
-	source "package/python-sortedcontainers//Config.in"
+	source "package/python-sortedcontainers/Config.in"
 	source "package/python-spidev/Config.in"
 	source "package/python-sqlalchemy/Config.in"
 	source "package/python-subprocess32/Config.in"
@@ -1161,6 +1161,7 @@ endmenu
 
 menu "Compression and decompression"
 	source "package/libarchive/Config.in"
+	source "package/libmspack/Config.in"
 	source "package/libsquish/Config.in"
 	source "package/libzip/Config.in"
 	source "package/lzo/Config.in"
diff --git a/buildroot/package/Config.in.host b/buildroot/package/Config.in.host
index b4c501a33..2c68fb7e3 100644
--- a/buildroot/package/Config.in.host
+++ b/buildroot/package/Config.in.host
@@ -16,6 +16,7 @@ menu "Host utilities"
 	source "package/dtc/Config.in.host"
 	source "package/e2fsprogs/Config.in.host"
 	source "package/e2tools/Config.in.host"
+	source "package/eudev/Config.in.host"
 	source "package/f2fs-tools/Config.in.host"
 	source "package/faketime/Config.in.host"
 	source "package/fwup/Config.in.host"
diff --git a/buildroot/package/am33x-cm3/0002-Makefile-unconditionally-disable-SSP.patch b/buildroot/package/am33x-cm3/0002-Makefile-unconditionally-disable-SSP.patch
new file mode 100644
index 000000000..ed333bfe0
--- /dev/null
+++ b/buildroot/package/am33x-cm3/0002-Makefile-unconditionally-disable-SSP.patch
@@ -0,0 +1,35 @@
+From 6c3b05b74ccd49d8ba246bfef0c2e549b9f2bf7b Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Tue, 29 Oct 2019 16:14:18 +0100
+Subject: [PATCH] Makefile: unconditionally disable SSP
+
+Though -nostdlib is passed in $(CFLAGS), -fno-stack-protector must also be
+passed to avoid linking errors related to undefined references to
+'__stack_chk_guard' and '__stack_chk_fail' if toolchain enforces
+-fstack-protector.
+
+Fixes:
+ - http://autobuild.buildroot.net/results/3a3a21f3c35ea025e9b93e09c2454aed0ad31034
+
+Signed-off-by: Fabrice Fontaine 
+---
+ Makefile | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index c3ec071..5226006 100644
+--- a/Makefile
++++ b/Makefile
+@@ -16,7 +16,8 @@ INCLUDES = $(SRCDIR)/include
+ CFLAGS =-march=armv7-m -mcpu=cortex-m3 -mthumb -nostdlib -Wall -Wundef \
+ 	-Werror-implicit-function-declaration -Wstrict-prototypes \
+ 	-Wdeclaration-after-statement -fno-delete-null-pointer-checks \
+-	-Wempty-body -fno-strict-overflow  -g -I$(INCLUDES) -O2
++	-Wempty-body -fno-strict-overflow -fno-stack-protector \
++	-g -I$(INCLUDES) -O2
+ LDFLAGS =-nostartfiles -fno-exceptions -Tfirmware.ld
+ 
+ EXECUTABLE=am335x-pm-firmware.elf
+-- 
+2.23.0
+
diff --git a/buildroot/package/am33x-cm3/0003-Makefile-unconditionally-disable-PIE.patch b/buildroot/package/am33x-cm3/0003-Makefile-unconditionally-disable-PIE.patch
new file mode 100644
index 000000000..6be157932
--- /dev/null
+++ b/buildroot/package/am33x-cm3/0003-Makefile-unconditionally-disable-PIE.patch
@@ -0,0 +1,33 @@
+From 0e8c3c4851ce64268a8ae1810ef72594251d917d Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Sun, 10 Nov 2019 21:57:12 +0100
+Subject: [PATCH] Makefile: unconditionally disable PIE
+
+Though -nostdlib is passed in $(CFLAGS), -fno-pie must also be passed to
+avoid linking errors related to overlapping sections if toolchain
+enforces PIE.
+
+Fixes:
+ - http://autobuild.buildroot.org/results/418a40b995e91bc66e692dfbc4b0521db3fa5fbb
+
+Signed-off-by: Fabrice Fontaine 
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 5226006..fe3d844 100644
+--- a/Makefile
++++ b/Makefile
+@@ -17,7 +17,7 @@ CFLAGS =-march=armv7-m -mcpu=cortex-m3 -mthumb -nostdlib -Wall -Wundef \
+ 	-Werror-implicit-function-declaration -Wstrict-prototypes \
+ 	-Wdeclaration-after-statement -fno-delete-null-pointer-checks \
+ 	-Wempty-body -fno-strict-overflow -fno-stack-protector \
+-	-g -I$(INCLUDES) -O2
++	-fno-pie -g -I$(INCLUDES) -O2
+ LDFLAGS =-nostartfiles -fno-exceptions -Tfirmware.ld
+ 
+ EXECUTABLE=am335x-pm-firmware.elf
+-- 
+2.23.0
+
diff --git a/buildroot/package/apache/apache.hash b/buildroot/package/apache/apache.hash
index 0c3a1d530..24c00eb94 100644
--- a/buildroot/package/apache/apache.hash
+++ b/buildroot/package/apache/apache.hash
@@ -1,4 +1,4 @@
-# From http://archive.apache.org/dist/httpd/httpd-2.4.39.tar.bz2.sha256
-sha256 b4ca9d05773aa59b54d66cd8f4744b945289f084d3be17d7981d1783a5decfa2 httpd-2.4.39.tar.bz2
+# From http://archive.apache.org/dist/httpd/httpd-2.4.41.tar.bz2.sha256
+sha256 133d48298fe5315ae9366a0ec66282fa4040efa5d566174481077ade7d18ea40 httpd-2.4.41.tar.bz2
 # Locally computed
 sha256 c49c0819a726b70142621715dae3159c47b0349c2bc9db079070f28dadac0229 LICENSE
diff --git a/buildroot/package/apache/apache.mk b/buildroot/package/apache/apache.mk
index ebb28b653..1d62538b1 100644
--- a/buildroot/package/apache/apache.mk
+++ b/buildroot/package/apache/apache.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-APACHE_VERSION = 2.4.39
+APACHE_VERSION = 2.4.41
 APACHE_SOURCE = httpd-$(APACHE_VERSION).tar.bz2
 APACHE_SITE = http://archive.apache.org/dist/httpd
 APACHE_LICENSE = Apache-2.0
diff --git a/buildroot/package/asterisk/asterisk.hash b/buildroot/package/asterisk/asterisk.hash
index d8cc56695..26aa4b89b 100644
--- a/buildroot/package/asterisk/asterisk.hash
+++ b/buildroot/package/asterisk/asterisk.hash
@@ -1,5 +1,5 @@
 # Locally computed
-sha256  c022e9d5410ed94ab1aa51ba1e2a8b196f0dfa15bcd0bd545d06efee4c786578  asterisk-16.2.1.tar.gz
+sha256  474cbc6f9dddee94616f8af8e097bc4d340dc9698c4165dc45be6e0be80ff725  asterisk-16.6.2.tar.gz
 
 # sha1 from: http://downloads.asterisk.org/pub/telephony/sounds/releases
 # sha256 locally computed
@@ -11,5 +11,5 @@ sha256  449fb810d16502c3052fedf02f7e77b36206ac5a145f3dacf4177843a2fcb538  asteri
 # License files, locally computed
 sha256  82af40ed7f49c08685360811993d9396320842f021df828801d733e8fdc0312f  COPYING
 sha256  ac5571f00e558e3b7c9b3f13f421b874cc12cf4250c4f70094c71544cf486312  main/sha1.c
-sha256  309462c10e84f46bda22032ebe6359f3e9e3e23afcf1fc2aaed5b59daf800d84  codecs/speex/speex_resampler.h
+sha256  6215e3ed73c3982a5c6701127d681ec0b9f1121ac78a28805bd93f93c3eb84c0  codecs/speex/speex_resampler.h
 sha256  1ca2c7a7a1ae7ccd75212a8c1e85dd9ec92bdbc9170aafd97ea60459387755fd  utils/db1-ast/include/db.h
diff --git a/buildroot/package/asterisk/asterisk.mk b/buildroot/package/asterisk/asterisk.mk
index 65f8d3fdf..00070aadb 100644
--- a/buildroot/package/asterisk/asterisk.mk
+++ b/buildroot/package/asterisk/asterisk.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-ASTERISK_VERSION = 16.2.1
+ASTERISK_VERSION = 16.6.2
 # Use the github mirror: it's an official mirror maintained by Digium, and
 # provides tarballs, which the main Asterisk git tree (behind Gerrit) does not.
 ASTERISK_SITE = $(call github,asterisk,asterisk,$(ASTERISK_VERSION))
diff --git a/buildroot/package/atk/Config.in b/buildroot/package/atk/Config.in
index c98061499..d9371b879 100644
--- a/buildroot/package/atk/Config.in
+++ b/buildroot/package/atk/Config.in
@@ -7,6 +7,8 @@ config BR2_PACKAGE_ATK
 	help
 	  The ATK accessibility toolkit, needed to build GTK+-2.x.
 
+	  https://gitlab.gnome.org/GNOME/atk
+
 comment "atk needs a toolchain w/ wchar, threads"
 	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/atk/atk.mk b/buildroot/package/atk/atk.mk
index 228b24a7d..6a0cb370d 100644
--- a/buildroot/package/atk/atk.mk
+++ b/buildroot/package/atk/atk.mk
@@ -11,6 +11,8 @@ ATK_SITE = http://ftp.gnome.org/pub/gnome/sources/atk/$(ATK_VERSION_MAJOR)
 ATK_LICENSE = LGPL-2.0+
 ATK_LICENSE_FILES = COPYING
 ATK_INSTALL_STAGING = YES
-ATK_DEPENDENCIES = libglib2
+ATK_DEPENDENCIES = libglib2 $(TARGET_NLS_DEPENDENCIES)
+
+ATK_LDFLAGS = $(TARGET_LDFLAGS) $(TARGET_NLS_LIBS)
 
 $(eval $(meson-package))
diff --git a/buildroot/package/augeas/augeas.mk b/buildroot/package/augeas/augeas.mk
index 8cb4f74e4..7897d8f49 100644
--- a/buildroot/package/augeas/augeas.mk
+++ b/buildroot/package/augeas/augeas.mk
@@ -11,9 +11,6 @@ AUGEAS_LICENSE = LGPL-2.1+
 AUGEAS_LICENSE_FILES = COPYING
 AUGEAS_DEPENDENCIES = host-pkgconf readline libxml2
 
-# patching examples/Makefile.am, can be removed when updating from version 1.9.0
-AUGEAS_AUTORECONF = YES
-
 AUGEAS_CONF_OPTS = --disable-gnulib-tests
 
 # Remove the test lenses which occupy about 1.4 MB on the target
diff --git a/buildroot/package/autofs/autofs.mk b/buildroot/package/autofs/autofs.mk
index e7c65ef4b..0af00fa93 100644
--- a/buildroot/package/autofs/autofs.mk
+++ b/buildroot/package/autofs/autofs.mk
@@ -11,11 +11,18 @@ AUTOFS_LICENSE = GPL-2.0+
 AUTOFS_LICENSE_FILES = COPYING COPYRIGHT
 AUTOFS_DEPENDENCIES = host-flex host-bison host-pkgconf host-nfs-utils
 
-# autofs looks on the build machine for the path of modprobe, so tell
-# it explicitly where it will be located on the target.
+# autofs looks on the build machine for the path of modprobe, mount,
+# umount and fsck programs so tell it explicitly where they will be
+# located on the target.
 AUTOFS_CONF_ENV = \
+	ac_cv_path_E2FSCK=/usr/sbin/fsck.ext2 \
+	ac_cv_path_E3FSCK=/usr/sbin/fsck.ext3 \
+	ac_cv_path_E4FSCK=/usr/sbin/fsck.ext4 \
 	ac_cv_path_KRB5_CONFIG=no \
 	ac_cv_path_MODPROBE=/sbin/modprobe \
+	ac_cv_path_MOUNT=/bin/mount \
+	ac_cv_path_MOUNT_NFS=/usr/sbin/mount.nfs \
+	ac_cv_path_UMOUNT=/bin/umount \
 	ac_cv_linux_procfs=yes
 
 # instead of looking in the PATH like any reasonable package, autofs
diff --git a/buildroot/package/azmq/Config.in b/buildroot/package/azmq/Config.in
index eeafa2ad6..2904890d5 100644
--- a/buildroot/package/azmq/Config.in
+++ b/buildroot/package/azmq/Config.in
@@ -20,7 +20,7 @@ config BR2_PACKAGE_AZMQ
 
 	  https://github.com/zeromq/azmq
 
-comment "azmq needs a toolchain w/ C++11, wchar and NTPL"
+comment "azmq needs a toolchain w/ C++11, wchar and NPTL"
 	depends on !(BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 \
 		&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS_NPTL)
 
diff --git a/buildroot/package/batctl/batctl.mk b/buildroot/package/batctl/batctl.mk
index 122263e46..824d2e15f 100644
--- a/buildroot/package/batctl/batctl.mk
+++ b/buildroot/package/batctl/batctl.mk
@@ -6,7 +6,7 @@
 
 BATCTL_VERSION = 2017.0
 BATCTL_SITE = http://downloads.open-mesh.org/batman/releases/batman-adv-$(BATCTL_VERSION)
-BATCTL_LICENSE = GPL-2.0
+BATCTL_LICENSE = GPL-2.0, MIT (batman_adv.h, list.h)
 BATCTL_DEPENDENCIES = libnl host-pkgconf
 
 define BATCTL_BUILD_CMDS
diff --git a/buildroot/package/batman-adv/batman-adv.mk b/buildroot/package/batman-adv/batman-adv.mk
index 51799186d..2cebe1356 100644
--- a/buildroot/package/batman-adv/batman-adv.mk
+++ b/buildroot/package/batman-adv/batman-adv.mk
@@ -6,7 +6,7 @@
 
 BATMAN_ADV_VERSION = 2017.0.1
 BATMAN_ADV_SITE = https://downloads.open-mesh.org/batman/stable/sources/batman-adv
-BATMAN_ADV_LICENSE = GPL-2.0
+BATMAN_ADV_LICENSE = GPL-2.0, MIT (batman_adv.h)
 
 # Bridge Loop Avoidance, Distributed Arp Table are always enabled
 BATMAN_ADV_CFLAGS = \
diff --git a/buildroot/package/bcg729/Config.in b/buildroot/package/bcg729/Config.in
index 8e9bcfe66..cb936ae15 100644
--- a/buildroot/package/bcg729/Config.in
+++ b/buildroot/package/bcg729/Config.in
@@ -4,4 +4,4 @@ config BR2_PACKAGE_BCG729
 	  Bcg729 is an opensource implementation of both encoder and
 	  decoder of the ITU G729 Annex A/B speech codec.
 
-	  http://www.linphone.org/technical-corner/bcg729/overview
+	  https://www.linphone.org/technical-corner/bcg729
diff --git a/buildroot/package/berkeleydb/berkeleydb.mk b/buildroot/package/berkeleydb/berkeleydb.mk
index e5c11bddc..e077eb464 100644
--- a/buildroot/package/berkeleydb/berkeleydb.mk
+++ b/buildroot/package/berkeleydb/berkeleydb.mk
@@ -44,6 +44,22 @@ define BERKELEYDB_CONFIGURE_CMDS
 	)
 endef
 
+define HOST_BERKELEYDB_CONFIGURE_CMDS
+	(cd $(@D)/build_unix; rm -rf config.cache; \
+		$(HOST_CONFIGURE_OPTS) \
+		../dist/configure $(QUIET) \
+		--prefix=$(HOST_DIR) \
+		--with-gnu-ld \
+		--disable-cxx \
+		--disable-java \
+		--disable-tcl \
+		--disable-compat185 \
+		--with-pic \
+		--enable-o_direct \
+		--disable-mutexsupport \
+	)
+endef
+
 ifneq ($(BR2_PACKAGE_BERKELEYDB_TOOLS),y)
 
 define BERKELEYDB_REMOVE_TOOLS
@@ -61,3 +77,4 @@ endef
 BERKELEYDB_POST_INSTALL_TARGET_HOOKS += BERKELEYDB_REMOVE_DOCS
 
 $(eval $(autotools-package))
+$(eval $(host-autotools-package))
diff --git a/buildroot/package/bind/0001-cross.patch b/buildroot/package/bind/0001-cross.patch
index 5b4b1cd83..d3e7cc68a 100644
--- a/buildroot/package/bind/0001-cross.patch
+++ b/buildroot/package/bind/0001-cross.patch
@@ -1,18 +1,23 @@
 Use host compiler to build 'gen' since it's run when building.
 
 Signed-off-by: Gustavo Zacarias 
+[Fabrice: updated for 9.11.10]
+Signed-off-by: Fabrice Fontaine 
 
 diff -Nura bind-9.5.1-P1/lib/dns/Makefile.in bind-9.5.1-P1.gencross/lib/dns/Makefile.in
 --- bind-9.5.1-P1/lib/dns/Makefile.in	2007-09-11 22:09:08.000000000 -0300
 +++ bind-9.5.1-P1.gencross/lib/dns/Makefile.in	2009-03-04 16:35:23.000000000 -0200
-@@ -160,8 +160,8 @@
- 	./gen -s ${srcdir} > code.h
+@@ -160,10 +160,8 @@
+ 	./gen -s ${srcdir} > code.h || { rm -f $@ ; exit 1; }
 
  gen: gen.c
 -	${BUILD_CC} ${BUILD_CFLAGS} -I${top_srcdir}/lib/isc/include \
--	${BUILD_CPPFLAGS} ${BUILD_LDFLAGS} -o $@ ${srcdir}/gen.c ${BUILD_LIBS}
+-	${LFS_CFLAGS} ${LFS_LDFLAGS} \
+-	${BUILD_CPPFLAGS} ${BUILD_LDFLAGS} -o $@ ${srcdir}/gen.c \
+-	${BUILD_LIBS} ${LFS_LIBS}
 +	${HOSTCC} ${HOST_CFLAGS} -I${top_srcdir}/lib/isc/include \
 +	${HOST_LDFLAGS} -o $@ ${srcdir}/gen.c
 
- rbtdb64.@O@: rbtdb.c
+ timestamp: include libdns.@A@
+ 	touch timestamp
 
diff --git a/buildroot/package/bind/0002-Replace-atomic-operations-in-bin-named-client.c-with.patch b/buildroot/package/bind/0002-Replace-atomic-operations-in-bin-named-client.c-with.patch
deleted file mode 100644
index 2701de766..000000000
--- a/buildroot/package/bind/0002-Replace-atomic-operations-in-bin-named-client.c-with.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From ef49780d30d3ddc5735cfc32561b678a634fa72f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ond=C5=99ej=20Sur=C3=BD?= 
-Date: Wed, 17 Apr 2019 15:22:27 +0200
-Subject: [PATCH] Replace atomic operations in bin/named/client.c with
- isc_refcount reference counting
-
-Signed-off-by: Peter Korsgaard 
----
- bin/named/client.c                     | 18 +++++++-----------
- bin/named/include/named/interfacemgr.h |  5 +++--
- bin/named/interfacemgr.c               |  7 +++++--
- 3 files changed, 15 insertions(+), 15 deletions(-)
-
-diff --git a/bin/named/client.c b/bin/named/client.c
-index 845326abc0..29fecadca8 100644
---- a/bin/named/client.c
-+++ b/bin/named/client.c
-@@ -402,12 +402,10 @@ tcpconn_detach(ns_client_t *client) {
- static void
- mark_tcp_active(ns_client_t *client, bool active) {
- 	if (active && !client->tcpactive) {
--		isc_atomic_xadd(&client->interface->ntcpactive, 1);
-+		isc_refcount_increment0(&client->interface->ntcpactive, NULL);
- 		client->tcpactive = active;
- 	} else if (!active && client->tcpactive) {
--		uint32_t old =
--			isc_atomic_xadd(&client->interface->ntcpactive, -1);
--		INSIST(old > 0);
-+		isc_refcount_decrement(&client->interface->ntcpactive, NULL);
- 		client->tcpactive = active;
- 	}
- }
-@@ -554,7 +552,7 @@ exit_check(ns_client_t *client) {
- 		if (client->mortal && TCP_CLIENT(client) &&
- 		    client->newstate != NS_CLIENTSTATE_FREED &&
- 		    !ns_g_clienttest &&
--		    isc_atomic_xadd(&client->interface->ntcpaccepting, 0) == 0)
-+		    isc_refcount_current(&client->interface->ntcpaccepting) == 0)
- 		{
- 			/* Nobody else is accepting */
- 			client->mortal = false;
-@@ -3328,7 +3326,6 @@ client_newconn(isc_task_t *task, isc_event_t *event) {
- 	isc_result_t result;
- 	ns_client_t *client = event->ev_arg;
- 	isc_socket_newconnev_t *nevent = (isc_socket_newconnev_t *)event;
--	uint32_t old;
- 
- 	REQUIRE(event->ev_type == ISC_SOCKEVENT_NEWCONN);
- 	REQUIRE(NS_CLIENT_VALID(client));
-@@ -3348,8 +3345,7 @@ client_newconn(isc_task_t *task, isc_event_t *event) {
- 	INSIST(client->naccepts == 1);
- 	client->naccepts--;
- 
--	old = isc_atomic_xadd(&client->interface->ntcpaccepting, -1);
--	INSIST(old > 0);
-+	isc_refcount_decrement(&client->interface->ntcpaccepting, NULL);
- 
- 	/*
- 	 * We must take ownership of the new socket before the exit
-@@ -3480,8 +3476,8 @@ client_accept(ns_client_t *client) {
- 		 * quota is tcp-clients plus the number of listening
- 		 * interfaces plus 1.)
- 		 */
--		exit = (isc_atomic_xadd(&client->interface->ntcpactive, 0) >
--			(client->tcpactive ? 1 : 0));
-+		exit = (isc_refcount_current(&client->interface->ntcpactive) >
-+			(client->tcpactive ? 1U : 0U));
- 		if (exit) {
- 			client->newstate = NS_CLIENTSTATE_INACTIVE;
- 			(void)exit_check(client);
-@@ -3539,7 +3535,7 @@ client_accept(ns_client_t *client) {
- 	 * listening for connections itself to prevent the interface
- 	 * going dead.
- 	 */
--	isc_atomic_xadd(&client->interface->ntcpaccepting, 1);
-+	isc_refcount_increment0(&client->interface->ntcpaccepting, NULL);
- }
- 
- static void
-diff --git a/bin/named/include/named/interfacemgr.h b/bin/named/include/named/interfacemgr.h
-index 3535ef22a8..6e10f210fd 100644
---- a/bin/named/include/named/interfacemgr.h
-+++ b/bin/named/include/named/interfacemgr.h
-@@ -45,6 +45,7 @@
- #include 
- #include 
- #include 
-+#include 
- 
- #include 
- 
-@@ -75,11 +76,11 @@ struct ns_interface {
- 						/*%< UDP dispatchers. */
- 	isc_socket_t *		tcpsocket;	/*%< TCP socket. */
- 	isc_dscp_t		dscp;		/*%< "listen-on" DSCP value */
--	int32_t			ntcpaccepting;	/*%< Number of clients
-+	isc_refcount_t		ntcpaccepting;	/*%< Number of clients
- 						     ready to accept new
- 						     TCP connections on this
- 						     interface */
--	int32_t			ntcpactive;	/*%< Number of clients
-+	isc_refcount_t		ntcpactive;	/*%< Number of clients
- 						     servicing TCP queries
- 						     (whether accepting or
- 						     connected) */
-diff --git a/bin/named/interfacemgr.c b/bin/named/interfacemgr.c
-index d9f6df5802..135533be6b 100644
---- a/bin/named/interfacemgr.c
-+++ b/bin/named/interfacemgr.c
-@@ -386,8 +386,8 @@ ns_interface_create(ns_interfacemgr_t *mgr, isc_sockaddr_t *addr,
- 	 * connections will be handled in parallel even though there is
- 	 * only one client initially.
- 	 */
--	ifp->ntcpaccepting = 0;
--	ifp->ntcpactive = 0;
-+	isc_refcount_init(&ifp->ntcpaccepting, 0);
-+	isc_refcount_init(&ifp->ntcpactive, 0);
- 
- 	ifp->nudpdispatch = 0;
- 
-@@ -618,6 +618,9 @@ ns_interface_destroy(ns_interface_t *ifp) {
- 
- 	ns_interfacemgr_detach(&ifp->mgr);
- 
-+	isc_refcount_destroy(&ifp->ntcpactive);
-+	isc_refcount_destroy(&ifp->ntcpaccepting);
-+
- 	ifp->magic = 0;
- 	isc_mem_put(mctx, ifp, sizeof(*ifp));
- }
--- 
-2.11.0
-
diff --git a/buildroot/package/bind/Config.in b/buildroot/package/bind/Config.in
index 049a90cba..951dd2356 100644
--- a/buildroot/package/bind/Config.in
+++ b/buildroot/package/bind/Config.in
@@ -24,7 +24,7 @@ config BR2_PACKAGE_BIND
 	  intended to be linked with applications requiring name
 	  service.
 
-	  http://www.isc.org/sw/bind/
+	  https://www.isc.org/bind/
 
 if BR2_PACKAGE_BIND
 
diff --git a/buildroot/package/bind/bind.hash b/buildroot/package/bind/bind.hash
index cdd4bdd31..53b5ce3a4 100644
--- a/buildroot/package/bind/bind.hash
+++ b/buildroot/package/bind/bind.hash
@@ -1,4 +1,4 @@
-# Verified from https://ftp.isc.org/isc/bind9/9.11.6-P1/bind-9.11.6-P1.tar.gz.asc
-# with key 156890685EA0DF6A1371EF2017CC5DB1F0088407
-sha256 58ace2abb4d048b67abcdef0649ecd6cbd3b0652734a41a1d34f942d5500f8ef bind-9.11.6-P1.tar.gz
+# Verified from https://ftp.isc.org/isc/bind9/9.11.13/bind-9.11.13.tar.gz.asc
+# with key AE3FAC796711EC59FC007AA474BB6B9A4CBB3D38
+sha256 fd3f3cc9fcfcdaa752db35eb24598afa1fdcc2509d3227fc90a8631b7b400f7d bind-9.11.13.tar.gz
 sha256 cd02c93b8dcda794f55dfd1231828d69633072a98eee4874f9cf732d22d9dcde COPYRIGHT
diff --git a/buildroot/package/bind/bind.mk b/buildroot/package/bind/bind.mk
index 42c240a74..efe4abde9 100644
--- a/buildroot/package/bind/bind.mk
+++ b/buildroot/package/bind/bind.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-BIND_VERSION = 9.11.6-P1
+BIND_VERSION = 9.11.13
 BIND_SITE = https://ftp.isc.org/isc/bind9/$(BIND_VERSION)
 # bind does not support parallel builds.
 BIND_MAKE = $(MAKE1)
diff --git a/buildroot/package/bluez5_utils-headers/bluez5_utils-headers.mk b/buildroot/package/bluez5_utils-headers/bluez5_utils-headers.mk
index 020e8b4d4..c61f93a23 100644
--- a/buildroot/package/bluez5_utils-headers/bluez5_utils-headers.mk
+++ b/buildroot/package/bluez5_utils-headers/bluez5_utils-headers.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 # Keep the version and patches in sync with bluez5_utils
-BLUEZ5_UTILS_HEADERS_VERSION = 5.50
+BLUEZ5_UTILS_HEADERS_VERSION = 5.52
 BLUEZ5_UTILS_HEADERS_SOURCE = bluez-$(BLUEZ5_UTILS_VERSION).tar.xz
 BLUEZ5_UTILS_HEADERS_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth
 BLUEZ5_UTILS_HEADERS_DL_SUBDIR = bluez5_utils
diff --git a/buildroot/package/bluez5_utils/bluez5_utils.hash b/buildroot/package/bluez5_utils/bluez5_utils.hash
index b96570855..00112bc0b 100644
--- a/buildroot/package/bluez5_utils/bluez5_utils.hash
+++ b/buildroot/package/bluez5_utils/bluez5_utils.hash
@@ -1,4 +1,4 @@
 # From https://www.kernel.org/pub/linux/bluetooth/sha256sums.asc:
-sha256  5ffcaae18bbb6155f1591be8c24898dc12f062075a40b538b745bfd477481911  bluez-5.50.tar.xz
+sha256  f7144ce2039202cfac18ccb52426efea11c98e4f6e1bb8041bcb994b8378560a  bluez-5.52.tar.xz
 sha256  b499eddebda05a8859e32b820a64577d91f1de2b52efa2a1575a2cb4000bc259  COPYING
 sha256  ec60b993835e2c6b79e6d9226345f4e614e686eb57dc13b6420c15a33a8996e5  COPYING.LIB
diff --git a/buildroot/package/bluez5_utils/bluez5_utils.mk b/buildroot/package/bluez5_utils/bluez5_utils.mk
index 15c9b670a..7c5202b71 100644
--- a/buildroot/package/bluez5_utils/bluez5_utils.mk
+++ b/buildroot/package/bluez5_utils/bluez5_utils.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 # Keep the version and patches in sync with bluez5_utils-headers
-BLUEZ5_UTILS_VERSION = 5.50
+BLUEZ5_UTILS_VERSION = 5.52
 BLUEZ5_UTILS_SOURCE = bluez-$(BLUEZ5_UTILS_VERSION).tar.xz
 BLUEZ5_UTILS_SITE = $(BR2_KERNEL_MIRROR)/linux/bluetooth
 BLUEZ5_UTILS_INSTALL_STAGING = YES
diff --git a/buildroot/package/brotli/brotli.mk b/buildroot/package/brotli/brotli.mk
index 2c1ad4875..134f48089 100644
--- a/buildroot/package/brotli/brotli.mk
+++ b/buildroot/package/brotli/brotli.mk
@@ -14,4 +14,12 @@ BROTLI_CONF_OPTS = \
 	-DBROTLI_DISABLE_TESTS=ON \
 	-DBROTLI_BUNDLED_MODE=OFF
 
+BROTLI_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y)
+BROTLI_CFLAGS += -O0
+endif
+
+BROTLI_CONF_OPTS += -DCMAKE_C_FLAGS="$(BROTLI_CFLAGS)"
+
 $(eval $(cmake-package))
diff --git a/buildroot/package/busybox/busybox.config b/buildroot/package/busybox/busybox.config
index 1d9560d65..ab04854c8 100644
--- a/buildroot/package/busybox/busybox.config
+++ b/buildroot/package/busybox/busybox.config
@@ -967,9 +967,9 @@ CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=0
 CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
-# CONFIG_FEATURE_UDHCP_RFC3397 is not set
+CONFIG_FEATURE_UDHCP_RFC3397=y
 CONFIG_FEATURE_UDHCP_8021Q=y
-CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"
+CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n -O search"
 
 #
 # Print Utilities
diff --git a/buildroot/package/busybox/busybox.mk b/buildroot/package/busybox/busybox.mk
index 179af6aea..565488ce1 100644
--- a/buildroot/package/busybox/busybox.mk
+++ b/buildroot/package/busybox/busybox.mk
@@ -262,7 +262,9 @@ endif
 
 ifeq ($(BR2_INIT_BUSYBOX),y)
 define BUSYBOX_INSTALL_INITTAB
-	$(INSTALL) -D -m 0644 package/busybox/inittab $(TARGET_DIR)/etc/inittab
+	if test ! -e $(TARGET_DIR)/etc/inittab; then \
+		$(INSTALL) -D -m 0644 package/busybox/inittab $(TARGET_DIR)/etc/inittab; \
+	fi
 endef
 endif
 
diff --git a/buildroot/package/busybox/udhcpc.script b/buildroot/package/busybox/udhcpc.script
index ad110d3a7..131c138b1 100755
--- a/buildroot/package/busybox/udhcpc.script
+++ b/buildroot/package/busybox/udhcpc.script
@@ -56,7 +56,7 @@ case "$1" in
 		cat $TMPFILE > $RESOLV_CONF
 		rm -f $TMPFILE
 
-		# prefer rfc3359 domain search list (option 119) if available
+		# prefer rfc3397 domain search list (option 119) if available
 		if [ -n "$search" ]; then
 			search_list=$search
 		elif [ -n "$domain" ]; then
diff --git a/buildroot/package/bwm-ng/bwm-ng.mk b/buildroot/package/bwm-ng/bwm-ng.mk
index 587ffbea5..32e097e23 100644
--- a/buildroot/package/bwm-ng/bwm-ng.mk
+++ b/buildroot/package/bwm-ng/bwm-ng.mk
@@ -7,7 +7,7 @@
 BWM_NG_VERSION = f54b3fad2c80bfe63f920c9b5e7c1d80389c57ef
 BWM_NG_SITE = $(call github,vgropp,bwm-ng,$(BWM_NG_VERSION))
 BWM_NG_CONF_OPTS = --with-procnetdev --with-diskstats
-BWM_NG_LICENSE = GPL-2.0
+BWM_NG_LICENSE = GPL-2.0+
 BWM_NG_LICENSE_FILES = COPYING
 BWM_NG_AUTORECONF = YES
 
diff --git a/buildroot/package/bzip2/0002-improve-build-system.patch b/buildroot/package/bzip2/0002-improve-build-system.patch
index 90099aa28..2d6e2cf90 100644
--- a/buildroot/package/bzip2/0002-improve-build-system.patch
+++ b/buildroot/package/bzip2/0002-improve-build-system.patch
@@ -70,15 +70,15 @@ Index: b/Makefile-libbz2_so
        huffman.o    \
 @@ -37,8 +36,11 @@
  all: $(OBJS)
- 	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.6 $(OBJS)
- 	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.6
+ 	$(CC) -shared -Wl,-soname -Wl,libbz2.so.1.0 -o libbz2.so.1.0.8 $(OBJS)
+ 	$(CC) $(CFLAGS) -o bzip2-shared bzip2.c libbz2.so.1.0.8
 -	rm -f libbz2.so.1.0
--	ln -s libbz2.so.1.0.6 libbz2.so.1.0
+-	ln -s libbz2.so.1.0.8 libbz2.so.1.0
 +
 +install:
-+	install -m 0755 -D libbz2.so.1.0.6 $(PREFIX)/lib/libbz2.so.1.0.6
-+	ln -sf libbz2.so.1.0.6 $(PREFIX)/lib/libbz2.so
-+	ln -sf libbz2.so.1.0.6 $(PREFIX)/lib/libbz2.so.1.0
++	install -m 0755 -D libbz2.so.1.0.8 $(PREFIX)/lib/libbz2.so.1.0.8
++	ln -sf libbz2.so.1.0.8 $(PREFIX)/lib/libbz2.so
++	ln -sf libbz2.so.1.0.8 $(PREFIX)/lib/libbz2.so.1.0
  
  clean: 
- 	rm -f $(OBJS) bzip2.o libbz2.so.1.0.6 libbz2.so.1.0 bzip2-shared
+ 	rm -f $(OBJS) bzip2.o libbz2.so.1.0.8 libbz2.so.1.0 bzip2-shared
diff --git a/buildroot/package/bzip2/Config.in b/buildroot/package/bzip2/Config.in
index ca447bbb2..7db1902b6 100644
--- a/buildroot/package/bzip2/Config.in
+++ b/buildroot/package/bzip2/Config.in
@@ -5,3 +5,5 @@ config BR2_PACKAGE_BZIP2
 	  It typically compresses files to within 10% to 15% of the best
 	  available techniques, while being around twice as fast at
 	  compression and six times faster at decompression.
+
+	  https://sourceware.org/bzip2/
diff --git a/buildroot/package/bzip2/bzip2.hash b/buildroot/package/bzip2/bzip2.hash
index 60b0a191e..cf66c402f 100644
--- a/buildroot/package/bzip2/bzip2.hash
+++ b/buildroot/package/bzip2/bzip2.hash
@@ -1,2 +1,4 @@
-# From http://www.bzip.org/downloads.html
-md5	00b516f4704d4a7cb50a1d97e6e8e15b	bzip2-1.0.6.tar.gz
+# From https://sourceware.org/pub/bzip2/sha512.sum
+sha512 083f5e675d73f3233c7930ebe20425a533feedeaaa9d8cc86831312a6581cefbe6ed0d08d2fa89be81082f2a5abdabca8b3c080bf97218a1bd59dc118a30b9f3  bzip2-1.0.8.tar.gz
+# Locally calculated
+sha256 c6dbbf828498be844a89eaa3b84adbab3199e342eb5cb2ed2f0d4ba7ec0f38a3  LICENSE
diff --git a/buildroot/package/bzip2/bzip2.mk b/buildroot/package/bzip2/bzip2.mk
index a3af32299..b4d8eea25 100644
--- a/buildroot/package/bzip2/bzip2.mk
+++ b/buildroot/package/bzip2/bzip2.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-BZIP2_VERSION = 1.0.6
-BZIP2_SITE = http://sources.buildroot.net
+BZIP2_VERSION = 1.0.8
+BZIP2_SITE = https://sourceware.org/pub/bzip2
 BZIP2_INSTALL_STAGING = YES
 BZIP2_LICENSE = bzip2 license
 BZIP2_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/ca-certificates/Config.in b/buildroot/package/ca-certificates/Config.in
index 6bb71820d..cd9825a81 100644
--- a/buildroot/package/ca-certificates/Config.in
+++ b/buildroot/package/ca-certificates/Config.in
@@ -9,4 +9,4 @@ config BR2_PACKAGE_CA_CERTIFICATES
 	  Debian infrastructure and those shipped with Mozilla's
 	  browsers.
 
-	  http://anonscm.debian.org/gitweb/?p=collab-maint/ca-certificates.git
+	  https://salsa.debian.org/debian/ca-certificates
diff --git a/buildroot/package/cc-tool/cc-tool.hash b/buildroot/package/cc-tool/cc-tool.hash
index 81844eec8..d778b4439 100644
--- a/buildroot/package/cc-tool/cc-tool.hash
+++ b/buildroot/package/cc-tool/cc-tool.hash
@@ -1,3 +1,6 @@
 # From http://sourceforge.net/projects/cctool/files/
 sha1 f313e55f019ea5338438633f5b5e689b699343e1  cc-tool-0.26-src.tgz
 md5 26960676f3e6264e612c299fbf8ec5ea  cc-tool-0.26-src.tgz
+
+# Hash for license file
+sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c  COPYING
diff --git a/buildroot/package/chrony/chrony.mk b/buildroot/package/chrony/chrony.mk
index b5821b238..00709e6f8 100644
--- a/buildroot/package/chrony/chrony.mk
+++ b/buildroot/package/chrony/chrony.mk
@@ -13,6 +13,7 @@ CHRONY_CONF_OPTS = \
 	--host-system=Linux \
 	--host-machine=$(BR2_ARCH) \
 	--prefix=/usr \
+	--without-readline \
 	--without-tomcrypt
 
 ifeq ($(BR2_PACKAGE_LIBCAP),y)
@@ -34,10 +35,10 @@ else
 CHRONY_CONF_OPTS += --without-seccomp
 endif
 
-ifeq ($(BR2_PACKAGE_READLINE),y)
-CHRONY_DEPENDENCIES += readline
+ifeq ($(BR2_PACKAGE_LIBEDIT),y)
+CHRONY_DEPENDENCIES += libedit
 else
-CHRONY_CONF_OPTS += --disable-readline
+CHRONY_CONF_OPTS += --without-editline --disable-readline
 endif
 
 # If pps-tools is available, build it before so the package can use it
diff --git a/buildroot/package/clamav/Config.in b/buildroot/package/clamav/Config.in
index 2017011b6..57338e910 100644
--- a/buildroot/package/clamav/Config.in
+++ b/buildroot/package/clamav/Config.in
@@ -4,6 +4,7 @@ config BR2_PACKAGE_CLAMAV
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU # fork()
 	depends on BR2_USE_WCHAR
+	select BR2_PACKAGE_LIBMSPACK
 	select BR2_PACKAGE_LIBTOOL
 	select BR2_PACKAGE_OPENSSL
 	select BR2_PACKAGE_ZLIB
diff --git a/buildroot/package/clamav/clamav.hash b/buildroot/package/clamav/clamav.hash
index 4b61cd965..84758c5cc 100644
--- a/buildroot/package/clamav/clamav.hash
+++ b/buildroot/package/clamav/clamav.hash
@@ -1,5 +1,5 @@
 # Locally calculated
-sha256 0a12ebdf6ff7a74c0bde2bdc2b55cae33449e6dd953ec90824a9e01291277634  clamav-0.101.2.tar.gz
+sha256 04bc4af7aa61cd4ce419a1cfbf77605ee40128455c7627fe2725dd157392d58c  clamav-0.101.5.tar.gz
 sha256 0c4fd2fa9733fc9122503797648710851e4ee6d9e4969dd33fcbd8c63cd2f584  COPYING
 sha256 d72a145c90918184a05ef65a04c9e6f7466faa59bc1b82c8f6a8ddc7ddcb9bed  COPYING.bzip2
 sha256 dfb818a0d41411c6fb1c193c68b73018ceadd1994bda41ad541cbff292894bc6  COPYING.file
diff --git a/buildroot/package/clamav/clamav.mk b/buildroot/package/clamav/clamav.mk
index 5bb0aa09d..5285c7afd 100644
--- a/buildroot/package/clamav/clamav.mk
+++ b/buildroot/package/clamav/clamav.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CLAMAV_VERSION = 0.101.2
+CLAMAV_VERSION = 0.101.5
 CLAMAV_SITE = https://www.clamav.net/downloads/production
 CLAMAV_LICENSE = GPL-2.0
 CLAMAV_LICENSE_FILES = COPYING COPYING.bzip2 COPYING.file COPYING.getopt \
@@ -12,6 +12,7 @@ CLAMAV_LICENSE_FILES = COPYING COPYING.bzip2 COPYING.file COPYING.getopt \
 	COPYING.unrar COPYING.zlib
 CLAMAV_DEPENDENCIES = \
 	host-pkgconf \
+	libmspack \
 	libtool \
 	openssl \
 	zlib \
@@ -32,6 +33,7 @@ CLAMAV_CONF_OPTS = \
 	--with-ltdl-include=$(STAGING_DIR)/usr/include \
 	--with-ltdl-lib=$(STAGING_DIR)/usr/lib \
 	--with-openssl=$(STAGING_DIR)/usr \
+	--with-system-libmspack=$(STAGING_DIR)/usr \
 	--with-zlib=$(STAGING_DIR)/usr \
 	--disable-zlib-vcheck \
 	--disable-rpath \
diff --git a/buildroot/package/cloop/cloop.mk b/buildroot/package/cloop/cloop.mk
index ad50d0a94..585f422ce 100644
--- a/buildroot/package/cloop/cloop.mk
+++ b/buildroot/package/cloop/cloop.mk
@@ -13,7 +13,8 @@ CLOOP_LICENSE_FILES = README advancecomp-1.15/COPYING
 HOST_CLOOP_DEPENDENCIES = host-zlib
 
 define HOST_CLOOP_BUILD_CMDS
-	$(HOST_CONFIGURE_OPTS) $(MAKE1) -C $(@D) APPSONLY=yes
+	$(HOST_CONFIGURE_OPTS) $(MAKE1) -C $(@D) APPSONLY=yes \
+		CFLAGS="$(HOST_CFLAGS) -D_GNU_SOURCE"
 endef
 
 define HOST_CLOOP_INSTALL_CMDS
diff --git a/buildroot/package/collectd/collectd.hash b/buildroot/package/collectd/collectd.hash
index cf7e0b83f..08682b6bc 100644
--- a/buildroot/package/collectd/collectd.hash
+++ b/buildroot/package/collectd/collectd.hash
@@ -1,5 +1,5 @@
 # From https://collectd.org/files/SHA256SUM
-sha256	7edd3643c0842215553b2421d5456f4e9a8a58b07e216b40a7e8e91026d8e501	collectd-5.7.1.tar.bz2
+sha256	9d20a0221569a8d6b80bbc52b86e5e84965f5bafdbf5dfc3790e0fed0763e592	collectd-5.7.2.tar.bz2
 
 # Hash for license files
 sha256	ed0409b2b1c30566dab5fcdaf46ee70e140c99788e22f0267645a9357b476ae4	COPYING
diff --git a/buildroot/package/collectd/collectd.mk b/buildroot/package/collectd/collectd.mk
index 589324e61..6cb040ab1 100644
--- a/buildroot/package/collectd/collectd.mk
+++ b/buildroot/package/collectd/collectd.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-COLLECTD_VERSION = 5.7.1
+COLLECTD_VERSION = 5.7.2
 COLLECTD_SITE = http://collectd.org/files
 COLLECTD_SOURCE = collectd-$(COLLECTD_VERSION).tar.bz2
 COLLECTD_CONF_ENV = ac_cv_lib_yajl_yajl_alloc=yes
@@ -15,7 +15,7 @@ COLLECTD_LICENSE_FILES = COPYING libltdl/COPYING.LIB
 # These require unmet dependencies, are fringe, pointless or deprecated
 COLLECTD_PLUGINS_DISABLE = \
 	amqp apple_sensors aquaero ascent barometer dbi dpdkstat email \
-	gmond grpc hddtemp intel_rdt ipmi java libvirt lpar lvm \
+	gmond grpc hddtemp intel_rdt ipmi java lpar lua lvm \
 	madwifi mbmon mic multimeter netapp notify_desktop numa \
 	nut onewire oracle perl pf pinba powerdns python redis routeros \
 	rrdcached sigrok tape target_v5upgrade teamspeak2 ted \
@@ -184,7 +184,7 @@ COLLECTD_CONF_OPTS += --with-libpq=$(STAGING_DIR)/usr/bin/pg_config
 COLLECTD_CONF_ENV += LIBS="-lpthread -lm"
 endif
 ifeq ($(BR2_PACKAGE_YAJL),y)
-COLLECTD_CONF_OPTS += --with-yajl=$(STAGING_DIR)/usr
+COLLECTD_CONF_OPTS += --with-libyajl=$(STAGING_DIR)/usr
 endif
 
 # network can use libgcrypt
diff --git a/buildroot/package/connman-gtk/connman-gtk.hash b/buildroot/package/connman-gtk/connman-gtk.hash
index d71e77d2c..fbc4acb14 100644
--- a/buildroot/package/connman-gtk/connman-gtk.hash
+++ b/buildroot/package/connman-gtk/connman-gtk.hash
@@ -1,2 +1,3 @@
 # Locally calculated
 sha256	49bdc4769a7c508b0130e4705eef21aec9df1ea4f5c29fee48a0cae8db828fca	connman-gtk-1.1.1.tar.bz2
+sha256	8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643	COPYING
diff --git a/buildroot/package/connman-gtk/connman-gtk.mk b/buildroot/package/connman-gtk/connman-gtk.mk
index 9888fcd4a..0ea49198e 100644
--- a/buildroot/package/connman-gtk/connman-gtk.mk
+++ b/buildroot/package/connman-gtk/connman-gtk.mk
@@ -8,8 +8,10 @@ CONNMAN_GTK_VERSION = 1.1.1
 CONNMAN_GTK_SITE = https://github.com/jgke/connman-gtk/releases/download/v$(CONNMAN_GTK_VERSION)
 CONNMAN_GTK_SOURCE = connman-gtk-$(CONNMAN_GTK_VERSION).tar.bz2
 CONNMAN_GTK_INSTALL_STAGING = YES
-CONNMAN_GTK_DEPENDENCIES = host-intltool connman libglib2 libgtk3
+CONNMAN_GTK_DEPENDENCIES = host-intltool connman libglib2 libgtk3 \
+	$(TARGET_NLS_DEPENDENCIES)
 CONNMAN_GTK_LICENSE = GPL-2.0+
 CONNMAN_GTK_LICENSE_FILES = COPYING
+CONNMAN_GTK_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 $(eval $(autotools-package))
diff --git a/buildroot/package/connman/connman.mk b/buildroot/package/connman/connman.mk
index b67d1c4b8..043175944 100644
--- a/buildroot/package/connman/connman.mk
+++ b/buildroot/package/connman/connman.mk
@@ -39,6 +39,7 @@ define CONNMAN_INSTALL_INIT_SYSTEMD
 endef
 
 ifeq ($(BR2_PACKAGE_CONNMAN_CLIENT),y)
+CONNMAN_LICENSE += , GPL-2.0+ (client)
 CONNMAN_CONF_OPTS += --enable-client
 CONNMAN_DEPENDENCIES += readline
 
diff --git a/buildroot/package/copas/Config.in b/buildroot/package/copas/Config.in
index 2de196710..347d86ddf 100644
--- a/buildroot/package/copas/Config.in
+++ b/buildroot/package/copas/Config.in
@@ -8,4 +8,4 @@ config BR2_PACKAGE_COPAS
 	  servers. But it also features timers and client support for
 	  http(s), ftp and smtp requests.
 
-	  http://www.keplerproject.org/copas/
+	  http://keplerproject.github.io/copas/
diff --git a/buildroot/package/cpio/0001-fix-CVE-2016-2037.patch b/buildroot/package/cpio/0001-fix-CVE-2016-2037.patch
deleted file mode 100644
index aec2ccb8e..000000000
--- a/buildroot/package/cpio/0001-fix-CVE-2016-2037.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Pavel Raiskup
-Subject: [Bug-cpio] [PATCH] fix 1-byte out-of-bounds write
-Date: Tue, 26 Jan 2016 23:17:54 +0100
-
-Other calls to cpio_safer_name_suffix seem to be safe.
-
-* src/copyin.c (process_copy_in):  Make sure that file_hdr.c_name
-has at least two bytes allocated.
-* src/util.c (cpio_safer_name_suffix): Document that use of this
-function requires to be careful.
-
-Signed-off-by: Gustavo Zacarias 
----
-Patch status: fetched/submitted
-URL: https://lists.gnu.org/archive/html/bug-cpio/2016-01/msg00005.html
-
- src/copyin.c | 2 ++
- src/util.c   | 5 ++++-
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/src/copyin.c b/src/copyin.c
-index cde911e..032d35f 100644
---- a/src/copyin.c
-+++ b/src/copyin.c
-@@ -1385,6 +1385,8 @@ process_copy_in ()
-          break;
-        }
-
-+      if (file_hdr.c_namesize <= 1)
-+        file_hdr.c_name = xrealloc(file_hdr.c_name, 2);
-       cpio_safer_name_suffix (file_hdr.c_name, false, !no_abs_paths_flag,
-                              false);
-
-diff --git a/src/util.c b/src/util.c
-index 6ff6032..2763ac1 100644
---- a/src/util.c
-+++ b/src/util.c
-@@ -1411,7 +1411,10 @@ set_file_times (int fd,
- }
- 
- /* Do we have to ignore absolute paths, and if so, does the filename
--   have an absolute path?  */
-+   have an absolute path?
-+   Before calling this function make sure that the allocated NAME buffer has
-+   capacity at least 2 bytes to allow us to store the "." string inside.  */
-+
- void
- cpio_safer_name_suffix (char *name, bool link_target, bool absolute_names,
-                        bool strip_leading_dots)
---
-2.5.0
diff --git a/buildroot/package/cpio/cpio.hash b/buildroot/package/cpio/cpio.hash
index 962a100cc..a3a0d4b3f 100644
--- a/buildroot/package/cpio/cpio.hash
+++ b/buildroot/package/cpio/cpio.hash
@@ -1,2 +1,7 @@
+# From https://lists.gnu.org/archive/html/info-gnu/2019-11/msg00002.html
+md5 f3438e672e3fa273a7dc26339dd1eed6  cpio-2.13.tar.bz2
+sha1 4dcefc0e1bc36b11506a354768d82b15e3fe6bb8  cpio-2.13.tar.bz2
 # Locally calculated after checking pgp signature
-sha256	08a35e92deb3c85d269a0059a27d4140a9667a6369459299d08c17f713a92e73	cpio-2.12.tar.gz
+sha256 eab5bdc5ae1df285c59f2a4f140a98fc33678a0bf61bdba67d9436ae26b46f6d  cpio-2.13.tar.bz2
+# Locally calculated
+sha256 fc82ca8b6fdb18d4e3e85cfd8ab58d1bcd3f1b29abe782895abd91d64763f8e7  COPYING
diff --git a/buildroot/package/cpio/cpio.mk b/buildroot/package/cpio/cpio.mk
index 9a0927957..76cd8659a 100644
--- a/buildroot/package/cpio/cpio.mk
+++ b/buildroot/package/cpio/cpio.mk
@@ -4,7 +4,8 @@
 #
 ################################################################################
 
-CPIO_VERSION = 2.12
+CPIO_VERSION = 2.13
+CPIO_SOURCE = cpio-$(CPIO_VERSION).tar.bz2
 CPIO_SITE = $(BR2_GNU_MIRROR)/cpio
 CPIO_CONF_OPTS = --bindir=/bin
 CPIO_LICENSE = GPL-3.0+
diff --git a/buildroot/package/cryptopp/cryptopp.mk b/buildroot/package/cryptopp/cryptopp.mk
index 8e3277a94..4565785cf 100644
--- a/buildroot/package/cryptopp/cryptopp.mk
+++ b/buildroot/package/cryptopp/cryptopp.mk
@@ -15,16 +15,23 @@ define HOST_CRYPTOPP_EXTRACT_CMDS
 	$(UNZIP) $(HOST_CRYPTOPP_DL_DIR)/$(CRYPTOPP_SOURCE) -d $(@D)
 endef
 
+HOST_CRYPTOPP_CXXFLAGS = $(HOST_CFLAGS) -fPIC
+
+# _mm256_broadcastsi128_si256 has been added only in gcc 4.9
+ifneq ($(BR2_HOST_GCC_AT_LEAST_4_9),y)
+HOST_CRYPTOPP_CXXFLAGS += -DCRYPTOPP_DISABLE_AVX2
+endif
+
 HOST_CRYPTOPP_MAKE_OPTS = \
 	$(HOST_CONFIGURE_OPTS) \
-	CXXFLAGS="$(HOST_CXXFLAGS) -fPIC"
+	CXXFLAGS="$(HOST_CRYPTOPP_CXXFLAGS)"
 
 define HOST_CRYPTOPP_BUILD_CMDS
 	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) $(HOST_CRYPTOPP_MAKE_OPTS) shared
 endef
 
 define HOST_CRYPTOPP_INSTALL_CMDS
-	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR) install
+	$(HOST_MAKE_ENV) $(MAKE) -C $(@D) PREFIX=$(HOST_DIR) install-lib
 endef
 
 $(eval $(host-generic-package))
diff --git a/buildroot/package/cups-filters/0001-Replace-relative-linking-with-absolute-linking.patch b/buildroot/package/cups-filters/0001-Replace-relative-linking-with-absolute-linking.patch
deleted file mode 100644
index e4b35cda3..000000000
--- a/buildroot/package/cups-filters/0001-Replace-relative-linking-with-absolute-linking.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From c26b4c3550557442890f2f790d4f8b61a3734c1f Mon Sep 17 00:00:00 2001
-From: Olivier Schonken 
-Date: Thu, 8 Mar 2018 12:32:23 +0200
-Subject: [PATCH] install: don't use ln -r
-
-Oldish enterprise-class distributions have too old versions of
-coreutils, with ln not supporting -r.
-
-So we fake it.
-
-ln -r would create minimalist relative paths, but they are not
-trivial to generate. Instead, we always create paths relative to the
-root, i.e.:
-
-    ln -s -r /usr/bin/foo /usr/sbin/foo
-
-would create:  /usr/sbin/foo -> ../bin/foo
-while we do :  /usr/sbin/foo -> ../../usr/bin/foo
-
-Signed-off-by: Olivier Schonken 
----
- Makefile.am | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/Makefile.am b/Makefile.am
-index d959227..b49914a 100644
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -998,11 +998,11 @@ install-exec-hook:
- 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgfilterdir)
- 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgbackenddir)
- if ENABLE_FOOMATIC
--	$(LN_S) -r -f $(DESTDIR)$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
-+	$(LN_S) -f ../..$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
- endif
- if ENABLE_DRIVERLESS
--	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
--	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
-+	$(LN_S) -f ../..$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
-+	$(LN_S) -f ../..$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
- endif
- if ENABLE_BRAILLE
- 	$(LN_S) -f imagetobrf $(DESTDIR)$(pkgfilterdir)/imagetoubrl
--- 
-2.14.1
-
diff --git a/buildroot/package/cups-filters/0001-install-support-old-ln-versions-without-the-r-option.patch b/buildroot/package/cups-filters/0001-install-support-old-ln-versions-without-the-r-option.patch
new file mode 100644
index 000000000..1f155fcef
--- /dev/null
+++ b/buildroot/package/cups-filters/0001-install-support-old-ln-versions-without-the-r-option.patch
@@ -0,0 +1,214 @@
+From edd44df686b4ec983a327cabc5035106addb274f Mon Sep 17 00:00:00 2001
+From: Carlos Santos 
+Date: Mon, 16 Sep 2019 22:22:37 -0300
+Subject: [PATCH] install: support old ln versions without the -r option
+
+Oldish enterprise-class Linux distributions have outdated versions of
+coreutils whose ln command do not support the -r option. Also non-Linux
+systems like FreeBSD don't support that option. Use a shell script that
+mimics the missing functionality.
+
+The script creates minimalist relative paths, like ln -r does, but in
+order to simplify the logic, it requires that the arguments be absolute
+paths and do not end with '/'. This is enough for our purposes.
+
+Add configuration logic to detect if ln supports the -r option, based on
+the logic used by Autoconf to check if ln supports the -s option.
+
+Signed-off-by: Carlos Santos 
+---
+ Makefile.am     |  6 ++--
+ configure.ac    |  2 ++
+ ln-srf          | 49 ++++++++++++++++++++++++++
+ m4/ac_ln_srf.m4 | 91 +++++++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 145 insertions(+), 3 deletions(-)
+ create mode 100755 ln-srf
+ create mode 100644 m4/ac_ln_srf.m4
+
+diff --git a/Makefile.am b/Makefile.am
+index 76b81de5..beb2882e 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -988,11 +988,11 @@ install-exec-hook:
+ 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgfilterdir)
+ 	$(INSTALL) -d -m 755 $(DESTDIR)$(pkgbackenddir)
+ if ENABLE_FOOMATIC
+-	$(LN_S) -r -f $(DESTDIR)$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
++	$(LN_SRF) $(DESTDIR)$(pkgfilterdir)/foomatic-rip $(DESTDIR)$(bindir)
+ endif
+ if ENABLE_DRIVERLESS
+-	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
+-	$(LN_S) -r -f $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
++	$(LN_SRF) $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(bindir)
++	$(LN_SRF) $(DESTDIR)$(pkgppdgendir)/driverless $(DESTDIR)$(pkgbackenddir)
+ endif
+ if ENABLE_BRAILLE
+ 	$(LN_S) -f imagetobrf $(DESTDIR)$(pkgfilterdir)/imagetoubrl
+diff --git a/configure.ac b/configure.ac
+index d5a539b6..fbcf829a 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -58,6 +58,8 @@ AM_ICONV
+ AC_PROG_CPP
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
++AS_LN_SRF_PREPARE
++AC_PROG_LN_SRF
+ AC_PROG_MAKE_SET
+ AC_PROG_LIBTOOL
+ PKG_PROG_PKG_CONFIG([0.20])
+diff --git a/ln-srf b/ln-srf
+new file mode 100755
+index 00000000..f395a760
+--- /dev/null
++++ b/ln-srf
+@@ -0,0 +1,49 @@
++#!/bin/sh
++#
++# Author: Carlos Santos 
++# This file is in public domain.
++#
++
++error() {
++	echo "$@" 1>&2
++	exit 1
++}
++
++src="$1"
++dst="$2"
++
++check_path() {
++	case "$2" in
++		*/../*|*/./*|*/.|*/..) error "$1 path '$2' must be absolute";;
++		*/) error "$1 path '$2' must not end with '/'";;
++		/?*) ;;
++		*) error "$1 path '$2' must start with '/'";;
++	esac
++}
++
++check_path "source" "$src"
++check_path "destination" "$dst"
++
++# strip leading '/'
++src=${src#/*}
++tmp=${dst#/*}
++
++s_prefix=${src%%/*}
++d_prefix=${tmp%%/*}
++
++# strip leading common
++while [ "$s_prefix" = "$d_prefix" ]; do
++	src="${src#$s_prefix/}"
++	tmp="${tmp#$d_prefix/}"
++	s_prefix=${src%%/*}
++	d_prefix=${tmp%%/*}
++done
++
++s_prefix="../"
++while [ -n "$d_prefix" ] && [ "$tmp" != "$d_prefix" ]; do
++	s_prefix="../$s_prefix"
++	tmp="${tmp#$d_prefix/}"
++	d_prefix=${tmp%%/*}
++done
++
++ln -s -f "$s_prefix$src" "$dst"
+diff --git a/m4/ac_ln_srf.m4 b/m4/ac_ln_srf.m4
+new file mode 100644
+index 00000000..204b3439
+--- /dev/null
++++ b/m4/ac_ln_srf.m4
+@@ -0,0 +1,91 @@
++# Adapted from Autoconf Version 2.63 (GPLv2).
++#
++# Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
++# Free Software Foundation, Inc.
++#
++# This program is free software: you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
++# As a special exception, the Free Software Foundation gives unlimited
++# permission to copy, distribute and modify the configure scripts that
++# are the output of Autoconf.  You need not follow the terms of the GNU
++# General Public License when using or distributing such scripts, even
++# though portions of the text of Autoconf appear in them.  The GNU
++# General Public License (GPL) does govern all other use of the material
++# that constitutes the Autoconf program.
++#
++# Certain portions of the Autoconf source text are designed to be copied
++# (in certain cases, depending on the input) into the output of
++# Autoconf.  We call these the "data" portions.  The rest of the Autoconf
++# source text consists of comments plus executable code that decides which
++# of the data portions to output in any given case.  We call these
++# comments and executable code the "non-data" portions.  Autoconf never
++# copies any of the non-data portions into its output.
++#
++# This special exception to the GPL applies to versions of Autoconf
++# released by the Free Software Foundation.  When you make and
++# distribute a modified version of Autoconf, you may extend this special
++# exception to the GPL to apply to your modified version as well, *unless*
++# your modified version has the potential to copy into its output some
++# of the text that was the non-data portion of the version that you started
++# with.  (In other words, unless your change moves or copies text from
++# the non-data portions to the data portions.)  If your modification has
++# such potential, you must delete any notice of this special exception
++# to the GPL from your modified version.
++
++# AS_LN_SRF_PREPARE
++# ------------------------------------
++m4_defun([AS_LN_SRF_PREPARE],
++[rm -f conf$$ conf$$.exe conf$$.file
++if test -d conf$$.dir; then
++  rm -f conf$$.dir/conf$$.file
++else
++  rm -f conf$$.dir
++  mkdir conf$$.dir 2>/dev/null
++fi
++if (echo >conf$$.file) 2>/dev/null; then
++  if ln -s -r conf$$.file conf$$ 2>/dev/null; then
++    as_ln_srf='ln -s -r -f'
++  elif ln -s conf$$.file conf$$ 2>/dev/null; then
++    as_ln_srf='./ln-srf'
++    # ... but there are two gotchas:
++    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
++    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
++    # In both cases, we have to default to `cp -pRf'.
++    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
++      as_ln_srf='cp -pRf'
++  elif ln conf$$.file conf$$ 2>/dev/null; then
++    as_ln_srf=ln
++  else
++    as_ln_srf='cp -pRf'
++  fi
++else
++  as_ln_srf='cp -pRf'
++fi
++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
++rmdir conf$$.dir 2>/dev/null
++])# AS_LN_SRF_PREPARE
++
++# AC_PROG_LN_SRF
++# --------------------------------
++AC_DEFUN([AC_PROG_LN_SRF],
++[AC_MSG_CHECKING([whether ln -s -r -f works])
++AC_SUBST([LN_SRF], [$as_ln_srf])dnl
++if test "$LN_SRF" = "ln -s -r -f"; then
++  AC_MSG_RESULT([yes])
++else
++  AC_MSG_RESULT([no, using $LN_SRF])
++fi
++])# AC_PROG_LN_SRF
+-- 
+2.18.1
+
diff --git a/buildroot/package/cups-filters/0002-filter-texttotext.c-link-with-libiconv-if-needed.patch b/buildroot/package/cups-filters/0002-filter-texttotext.c-link-with-libiconv-if-needed.patch
new file mode 100644
index 000000000..cace0773a
--- /dev/null
+++ b/buildroot/package/cups-filters/0002-filter-texttotext.c-link-with-libiconv-if-needed.patch
@@ -0,0 +1,122 @@
+From 734ef160b428c545d8c6ae16c4bfe3c036173aa4 Mon Sep 17 00:00:00 2001
+From: Carlos Santos 
+Date: Sun, 21 Jul 2019 23:54:29 -0300
+Subject: [PATCH] filter/texttotext.c: link with libiconv if needed
+
+texttotext.c uses iconv so it should link with libiconv on platforms
+where it is a separate library (e.g. uClibc-ng without built-in NLS)
+otherwise texttotext fails to link:
+
+  CCLD     texttotext
+[...]/ld: texttotext-texttotext.o: in function `main':
+texttotext.c:(.text.startup+0xde0): undefined reference to `libiconv_open'
+[...]/ld: texttotext.c:(.text.startup+0xf9d): undefined reference to `libiconv'
+[...]/ld: texttotext.c:(.text.startup+0xfd6): undefined reference to `libiconv'
+[...]/ld: texttotext.c:(.text.startup+0x16c3): undefined reference to `libiconv_close'
+
+Modify autogen.sh to call autopoint, which adds the libiconv discovery.
+It also creates a "po" skeleton but we can discard it, since it is not
+really necessary.
+
+Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
+
+Signed-off-by: Carlos Santos 
+---
+ Makefile.am  |  4 +++-
+ autogen.sh   | 17 +++++++++++++++++
+ configure.ac |  6 +++++-
+ 3 files changed, 25 insertions(+), 2 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index 72e023ed..76b81de5 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -778,7 +778,7 @@ texttotext_SOURCES = \
+ 	filter/texttotext.c
+ EXTRA_texttotext_SOURCES = filter/strcasestr.c
+ texttotext_CFLAGS = $(CUPS_CFLAGS)
+-texttotext_LDADD = $(STRCASESTR) $(CUPS_LIBS)
++texttotext_LDADD = $(STRCASESTR) $(CUPS_LIBS) $(LIBICONV)
+ texttotext_DEPENDENCIES = $(STRCASESTR)
+ 
+ pdftops_SOURCES = \
+@@ -1049,3 +1049,5 @@ if ENABLE_BRAILLE
+ 	$(RM) $(DESTDIR)$(pkgfilterdir)/vectortoubrl
+ 	$(RM) $(DESTDIR)$(pkgfilterdir)/textbrftoindexv4
+ endif
++
++SUBDIRS =
+diff --git a/autogen.sh b/autogen.sh
+index 5462a323..cd7397a9 100755
+--- a/autogen.sh
++++ b/autogen.sh
+@@ -13,11 +13,22 @@ aclocal --version > /dev/null 2> /dev/null || {
+     echo "error: aclocal not found"
+     exit 1
+ }
++
+ automake --version > /dev/null 2> /dev/null || {
+     echo "error: automake not found"
+     exit 1
+ }
+ 
++autopoint --version > /dev/null 2> /dev/null || {
++    echo "error: autopoint not found"
++    exit 1
++}
++
++gettext --version > /dev/null 2> /dev/null || {
++    echo "error: gettext not found"
++    exit 1
++}
++
+ for i in $TESTLIBTOOLIZE; do
+ 	if which $i > /dev/null 2>&1; then
+ 		LIBTOOLIZE=$i
+@@ -39,6 +50,12 @@ fi
+ 
+ rm -rf autom4te*.cache
+ 
++autopoint --force || {
++    echo "error: autopoint failed"
++    exit 1
++}
++# autopoint is for libiconv discovery; we don't want the po directory
++rm -rf po
+ $LIBTOOLIZE --force --copy || {
+     echo "error: libtoolize failed"
+     exit 1
+diff --git a/configure.ac b/configure.ac
+index 607dc17a..d5a539b6 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -18,7 +18,7 @@ AC_CONFIG_MACRO_DIR([m4])
+ m4_include([m4/ac_define_dir.m4])
+ m4_include([m4/ax_compare_version.m4])
+ m4_include([m4/basic-directories.m4])
+-AM_INIT_AUTOMAKE([1.11 gnu dist-xz dist-bzip2])
++AM_INIT_AUTOMAKE([1.11 gnu dist-xz dist-bzip2 subdir-objects])
+ AM_SILENT_RULES([yes])
+ AC_LANG([C++])
+ AC_CONFIG_HEADERS([config.h])
+@@ -54,6 +54,7 @@ AC_PROG_CC
+ AC_PROG_CXX
+ AX_CXX_COMPILE_STDCXX([11],[noext],[mandatory])
+ AM_PROG_CC_C_O
++AM_ICONV
+ AC_PROG_CPP
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
+@@ -61,6 +62,9 @@ AC_PROG_MAKE_SET
+ AC_PROG_LIBTOOL
+ PKG_PROG_PKG_CONFIG([0.20])
+ 
++AM_GNU_GETTEXT_VERSION([0.18.3])
++AM_GNU_GETTEXT([external])
++
+ # ========================================
+ # Specify the fontdir patch if not default
+ # ========================================
+-- 
+2.18.1
+
diff --git a/buildroot/package/cups-filters/cups-filters.mk b/buildroot/package/cups-filters/cups-filters.mk
index 81d919565..e5d731896 100644
--- a/buildroot/package/cups-filters/cups-filters.mk
+++ b/buildroot/package/cups-filters/cups-filters.mk
@@ -8,7 +8,7 @@ CUPS_FILTERS_VERSION = 1.21.3
 CUPS_FILTERS_SITE = http://openprinting.org/download/cups-filters
 CUPS_FILTERS_LICENSE = GPL-2.0, GPL-2.0+, GPL-3.0, GPL-3.0+, LGPL-2, LGPL-2.1+, MIT, BSD-4-Clause
 CUPS_FILTERS_LICENSE_FILES = COPYING
-# 0001-Replace-relative-linking-with-absolute-linking.patch
+# 0001-install-support-old-ln-versions-without-the-r-option.patch
 CUPS_FILTERS_AUTORECONF = YES
 
 CUPS_FILTERS_DEPENDENCIES = cups libglib2 lcms2 qpdf fontconfig freetype jpeg
@@ -16,11 +16,30 @@ CUPS_FILTERS_DEPENDENCIES = cups libglib2 lcms2 qpdf fontconfig freetype jpeg
 CUPS_FILTERS_CONF_OPTS = --disable-imagefilters \
 	--disable-mutool \
 	--disable-foomatic \
+	--disable-braille \
 	--with-cups-config=$(STAGING_DIR)/usr/bin/cups-config \
 	--with-sysroot=$(STAGING_DIR) \
 	--with-pdftops=pdftops \
 	--with-jpeg
 
+# 0001-install-support-old-ln-versions-without-the-r-option.patch adds
+# a ln-srf script for older distributions, but GNU patch < 2.7 does
+# not handle the git patch permission extensions - So ensure it is
+# executable
+define CUPS_FILTERS_MAKE_LN_SRF_EXECUTABLE
+	chmod +x $(@D)/ln-srf
+endef
+
+CUPS_FILTERS_POST_PATCH_HOOKS += CUPS_FILTERS_MAKE_LN_SRF_EXECUTABLE
+
+# After 0002-filter-texttotext.c-link-with-libiconv-if-needed.patch autoreconf
+# needs config.rpath and ABOUT-NLS, which are not in v1.25.4 yet. Fake them.
+define CUPS_FILTERS_ADD_MISSING_FILE
+	touch $(@D)/config.rpath $(@D)/ABOUT-NLS
+endef
+
+CUPS_FILTERS_PRE_CONFIGURE_HOOKS = CUPS_FILTERS_ADD_MISSING_FILE
+
 ifeq ($(BR2_PACKAGE_LIBPNG),y)
 CUPS_FILTERS_CONF_OPTS += --with-png
 CUPS_FILTERS_DEPENDENCIES += libpng
diff --git a/buildroot/package/cups/cups.hash b/buildroot/package/cups/cups.hash
index 3d238d61e..676f664b7 100644
--- a/buildroot/package/cups/cups.hash
+++ b/buildroot/package/cups/cups.hash
@@ -1,3 +1,3 @@
 # Locally calculated:
-sha256 77c8b2b3bb7fe8b5fbfffc307f2c817b2d7ec67b657f261a1dd1c61ab81205bb  cups-2.2.10-source.tar.gz
+sha256 da375796e5e7ab6d31a853d0e5326486d41d10d42bbff9ec768b0cea85031b48  cups-2.2.13-source.tar.gz
 sha256 6e0e0ffbde118aae709f7ef65590de9071e8b2cd322f84fd645c6b64f3cc452c  LICENSE.txt
diff --git a/buildroot/package/cups/cups.mk b/buildroot/package/cups/cups.mk
index b91fe7ac4..904a55f1e 100644
--- a/buildroot/package/cups/cups.mk
+++ b/buildroot/package/cups/cups.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CUPS_VERSION = 2.2.10
+CUPS_VERSION = 2.2.13
 CUPS_SOURCE = cups-$(CUPS_VERSION)-source.tar.gz
 CUPS_SITE = https://github.com/apple/cups/releases/download/v$(CUPS_VERSION)
 CUPS_LICENSE = GPL-2.0, LGPL-2.0
diff --git a/buildroot/package/dahdi-linux/dahdi-linux.hash b/buildroot/package/dahdi-linux/dahdi-linux.hash
index c362f8ea3..1847a4da4 100644
--- a/buildroot/package/dahdi-linux/dahdi-linux.hash
+++ b/buildroot/package/dahdi-linux/dahdi-linux.hash
@@ -1,7 +1,7 @@
 # sha1 from: http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases
 # sha256 locally computed
-sha1    8cbd55b8611c6ed80bcdf84d537566b4934f3def  dahdi-linux-2.11.1.tar.gz
-sha256  f59f382365118205e77d2874f1c0e1546e936247bcc45f07a43bc21778bee9df  dahdi-linux-2.11.1.tar.gz
+sha1    9827f0afc625e293021b81daf94ec054145c975b  dahdi-linux-3.0.0.tar.gz
+sha256  02a8a680d20a3e243f37259edc3554ab9a488595a28562c45c33da3792d12caa  dahdi-linux-3.0.0.tar.gz
 
 # Firmware files have no upstream hash, so sha56 locally computed
 sha256  3ff26cf80555fd7470b43a87c51d03c1db2a75abcd4561d79f69b6c48298e4a1  dahdi-fwload-vpmadt032-1.25.0.tar.gz
diff --git a/buildroot/package/dahdi-linux/dahdi-linux.mk b/buildroot/package/dahdi-linux/dahdi-linux.mk
index 6ac1e8894..4d2c7e717 100644
--- a/buildroot/package/dahdi-linux/dahdi-linux.mk
+++ b/buildroot/package/dahdi-linux/dahdi-linux.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DAHDI_LINUX_VERSION = 2.11.1
+DAHDI_LINUX_VERSION = 3.0.0
 DAHDI_LINUX_SITE = http://downloads.asterisk.org/pub/telephony/dahdi-linux/releases
 
 # We need to download all thoe firmware blobs ourselves, otherwise
diff --git a/buildroot/package/dahdi-tools/dahdi-tools.hash b/buildroot/package/dahdi-tools/dahdi-tools.hash
index 7b668c604..5538ed6b8 100644
--- a/buildroot/package/dahdi-tools/dahdi-tools.hash
+++ b/buildroot/package/dahdi-tools/dahdi-tools.hash
@@ -1,7 +1,7 @@
 # sha1 from http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases
 # sha256 locally computed
-sha1    5da944e6d59a977f814230253f3ddf2847e7f31b                          dahdi-tools-2.11.1.tar.gz
-sha256  53ffeb333f3e44b0c88e5b17475cdbf87d3f652eb81a6422de76250c061e2909  dahdi-tools-2.11.1.tar.gz
+sha1    3e988256aae4b6a6ed8efb3ecc07753779f54823                          dahdi-tools-3.0.0.tar.gz
+sha256  5bebb20d5ae13fa13f0e2075603013954b962be477db02271eef44b3e41557c5  dahdi-tools-3.0.0.tar.gz
 
 # License files, locally computed
 sha256  fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7  LICENSE
diff --git a/buildroot/package/dahdi-tools/dahdi-tools.mk b/buildroot/package/dahdi-tools/dahdi-tools.mk
index e97d944c5..392dc0914 100644
--- a/buildroot/package/dahdi-tools/dahdi-tools.mk
+++ b/buildroot/package/dahdi-tools/dahdi-tools.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DAHDI_TOOLS_VERSION = 2.11.1
+DAHDI_TOOLS_VERSION = 3.0.0
 DAHDI_TOOLS_SITE = http://downloads.asterisk.org/pub/telephony/dahdi-tools/releases
 
 DAHDI_TOOLS_LICENSE = GPLv2, LGPLv2.1
diff --git a/buildroot/package/dante/dante.mk b/buildroot/package/dante/dante.mk
index 0bd036d37..0668042bd 100644
--- a/buildroot/package/dante/dante.mk
+++ b/buildroot/package/dante/dante.mk
@@ -12,7 +12,7 @@ DANTE_LICENSE_FILES = LICENSE
 # 0002-compiler.m4-do-not-remove-g-flag.patch touches a m4 file
 DANTE_AUTORECONF = YES
 
-DANTE_CONF_OPTS += --disable-client --disable-preload --without-pam
+DANTE_CONF_OPTS += --disable-client --disable-preload
 
 ifeq ($(BR2_PACKAGE_LINUX_PAM),y)
 DANTE_DEPENDENCIES += linux-pam
diff --git a/buildroot/package/daq/daq.mk b/buildroot/package/daq/daq.mk
index a23a9dc5e..f0f996ba2 100644
--- a/buildroot/package/daq/daq.mk
+++ b/buildroot/package/daq/daq.mk
@@ -18,6 +18,13 @@ DAQ_MAKE = $(MAKE1)
 # disable ipq module as libipq is deprecated
 DAQ_CONF_OPTS += --disable-ipq-module
 
+# Set --with-dnet-{includes,libraries} even if ipq and nfq modules are disabled
+# otherwise daq will call 'dnet-config --cflags' and 'dnet-config --libs' which
+# will result in a build failure if libdnet is installed on host
+DAQ_CONF_OPTS += \
+	--with-dnet-includes=$(STAGING_DIR)/usr/include \
+	--with-dnet-libraries=$(STAGING_DIR)/usr/lib
+
 ifeq ($(BR2_PACKAGE_LIBDNET)$(BR2_PACKAGE_LIBNETFILTER_QUEUE),yy)
 DAQ_DEPENDENCIES += libdnet libnetfilter_queue
 DAQ_CONF_OPTS += --enable-nfq-module
diff --git a/buildroot/package/davfs2/davfs2.hash b/buildroot/package/davfs2/davfs2.hash
index 102659a38..7e2078bec 100644
--- a/buildroot/package/davfs2/davfs2.hash
+++ b/buildroot/package/davfs2/davfs2.hash
@@ -1,4 +1,4 @@
 # Locally calculated
-sha256 c9c4e0f0912a782386216b2147eb9c36c47f193b8fcf3d637719e0b9fe7c96e0  davfs2-1.5.4.tar.gz
+sha256 587c6a25ad78109995a7ccb8e60aa1c491b149f2c99d47033f3d5e648430ad2f  davfs2-1.5.5.tar.gz
 # License file, locally calculated
 sha256 0ae0485a5bd37a63e63603596417e4eb0e653334fa6c7f932ca3a0e85d4af227  COPYING
diff --git a/buildroot/package/davfs2/davfs2.mk b/buildroot/package/davfs2/davfs2.mk
index f2b2fdbe4..90f73f4df 100644
--- a/buildroot/package/davfs2/davfs2.mk
+++ b/buildroot/package/davfs2/davfs2.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DAVFS2_VERSION = 1.5.4
+DAVFS2_VERSION = 1.5.5
 DAVFS2_SITE = http://download.savannah.nongnu.org/releases/davfs2
 DAVFS2_LICENSE = GPL-3.0+
 DAVFS2_LICENSE_FILES = COPYING
diff --git a/buildroot/package/dbus/dbus.hash b/buildroot/package/dbus/dbus.hash
index 92c0c9421..9529d2e04 100644
--- a/buildroot/package/dbus/dbus.hash
+++ b/buildroot/package/dbus/dbus.hash
@@ -1,6 +1,6 @@
 # Locally calculated after checking pgp signature
-# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.10.tar.gz.asc
+# https://dbus.freedesktop.org/releases/dbus/dbus-1.12.16.tar.gz.asc
 # using key 36EC5A6448A4F5EF79BEFE98E05AE1478F814C4F
-sha256	4b693d24976258c3f2fa9cc33ad9288c5fbfa7a16481dbd9a8a429f7aa8cdcf7  dbus-1.12.10.tar.gz
+sha256	54a22d2fa42f2eb2a871f32811c6005b531b9613b1b93a0d269b05e7549fec80  dbus-1.12.16.tar.gz
 # Locally calculated
 sha256	0e46f54efb12d04ab5c33713bacd0e140c9a35b57ae29e03c853203266e8f3a1  COPYING
diff --git a/buildroot/package/dbus/dbus.mk b/buildroot/package/dbus/dbus.mk
index 0a56de5a4..a4043864d 100644
--- a/buildroot/package/dbus/dbus.mk
+++ b/buildroot/package/dbus/dbus.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DBUS_VERSION = 1.12.10
+DBUS_VERSION = 1.12.16
 DBUS_SITE = https://dbus.freedesktop.org/releases/dbus
 DBUS_LICENSE = AFL-2.1 or GPL-2.0+ (library, tools), GPL-2.0+ (tools)
 DBUS_LICENSE_FILES = COPYING
diff --git a/buildroot/package/dehydrated/dehydrated.hash b/buildroot/package/dehydrated/dehydrated.hash
index 1d194e5a7..388dd2474 100644
--- a/buildroot/package/dehydrated/dehydrated.hash
+++ b/buildroot/package/dehydrated/dehydrated.hash
@@ -1,6 +1,6 @@
 # Locally computed after verifying
-# https://github.com/lukas2511/dehydrated/releases/download/v0.6.2/dehydrated-0.6.2.tar.gz.asc
+# https://github.com/lukas2511/dehydrated/releases/download/v0.6.5/dehydrated-0.6.5.tar.gz.asc
 # with key 3C2F2605E078A1E18F4793909C4DBE6CF438F333 from https://keybase.io/lukas2511
-sha256  163384479199f06f59382ceb6291a299567a2f4f0b963b9b61f2db65a407e80e  dehydrated-0.6.2.tar.gz
+sha256  10aabd0027450bc70a18e49acaca7a9697e0cfb92368d3e508b7a4d6d69bfa35 dehydrated-0.6.5.tar.gz
 # License, locally computed
 sha256  b4583b7dd07e3e2a08906de38e7e329d41f921ed9dcb6310b3886e013a6b8723  LICENSE
diff --git a/buildroot/package/dehydrated/dehydrated.mk b/buildroot/package/dehydrated/dehydrated.mk
index b7de27a40..17c67b847 100644
--- a/buildroot/package/dehydrated/dehydrated.mk
+++ b/buildroot/package/dehydrated/dehydrated.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DEHYDRATED_VERSION = 0.6.2
+DEHYDRATED_VERSION = 0.6.5
 DEHYDRATED_SITE = https://github.com/lukas2511/dehydrated/releases/download/v$(DEHYDRATED_VERSION)
 
 DEHYDRATED_LICENSE = MIT
diff --git a/buildroot/package/dialog/dialog.mk b/buildroot/package/dialog/dialog.mk
index 73fabe07c..b1933b883 100644
--- a/buildroot/package/dialog/dialog.mk
+++ b/buildroot/package/dialog/dialog.mk
@@ -9,7 +9,7 @@ DIALOG_SOURCE = dialog-$(DIALOG_VERSION).tgz
 DIALOG_SITE = ftp://ftp.invisible-island.net/dialog
 DIALOG_CONF_OPTS = --with-ncurses --with-curses-dir=$(STAGING_DIR)/usr \
 	--disable-rpath-hack
-DIALOG_DEPENDENCIES = host-pkgconf ncurses
+DIALOG_DEPENDENCIES = host-pkgconf ncurses $(TARGET_NLS_DEPENDENCIES)
 DIALOG_LICENSE = LGPL-2.1
 DIALOG_LICENSE_FILES = COPYING
 
diff --git a/buildroot/package/dillo/0003-Fix-openssl-detection.patch b/buildroot/package/dillo/0003-Fix-openssl-detection.patch
new file mode 100644
index 000000000..6e5f1d021
--- /dev/null
+++ b/buildroot/package/dillo/0003-Fix-openssl-detection.patch
@@ -0,0 +1,29 @@
+From 96dde9dedf806256cdc6cbf5cacbd5c8d74e6288 Mon Sep 17 00:00:00 2001
+From: Jonathan Kimmitt 
+Date: Thu, 9 Jan 2020 22:01:42 +0100
+Subject: [PATCH] Fix openssl detection
+
+SSL_library_init is now a define, use OPENSSL_init_ssl instead.
+
+Signed-off-by: Jonathan Kimmitt 
+Signed-off-by: Peter Seiderer 
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index 66b5e9f..206fd53 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -276,7 +276,7 @@ if test "x$enable_ssl" = "xyes"; then
+ 
+   if test "x$ssl_ok" = "xyes"; then
+     old_libs="$LIBS"
+-    AC_CHECK_LIB(ssl, SSL_library_init, ssl_ok=yes, ssl_ok=no, -lcrypto)
++    AC_CHECK_LIB(ssl, OPENSSL_init_ssl, ssl_ok=yes, ssl_ok=no, -lcrypto)
+     LIBS="$old_libs"
+   fi
+ 
+-- 
+2.24.1
+
diff --git a/buildroot/package/dillo/0004-Support-OpenSSL-1.1.0.patch b/buildroot/package/dillo/0004-Support-OpenSSL-1.1.0.patch
new file mode 100644
index 000000000..87b9d0dce
--- /dev/null
+++ b/buildroot/package/dillo/0004-Support-OpenSSL-1.1.0.patch
@@ -0,0 +1,33 @@
+From ff44d8b2d5211a502afdb3e612dae0e8133b5124 Mon Sep 17 00:00:00 2001
+From: Johannes Hofmann 
+Date: Thu, 9 Jan 2020 22:07:15 +0100
+Subject: [PATCH] Support OpenSSL 1.1.0
+
+taken-from: pkgsrc (Ryo ONODERA)
+submitted-by: Jun Ebihara 
+
+Upstream: https://hg.dillo.org/dillo/rev/b171b8610400
+Signed-off-by: Peter Seiderer 
+---
+ dpi/https.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/dpi/https.c b/dpi/https.c
+index 766b3af..025cfc4 100644
+--- a/dpi/https.c
++++ b/dpi/https.c
+@@ -476,7 +476,11 @@ static int handle_certificate_problem(SSL * ssl_connection)
+       case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT:
+          /*Either self signed and untrusted*/
+          /*Extract CN from certificate name information*/
++#if OPENSSL_VERSION_NUMBER < 0x10100000L
+          if ((cn = strstr(remote_cert->name, "/CN=")) == NULL) {
++#else
++         if ((cn = strstr(X509_get_subject_name(remote_cert), "/CN=")) == NULL) {
++#endif
+             strcpy(buf, "(no CN given)");
+          } else {
+             char *cn_end;
+-- 
+2.24.1
+
diff --git a/buildroot/package/dmraid/Config.in b/buildroot/package/dmraid/Config.in
index aa98c853a..3c375f4c6 100644
--- a/buildroot/package/dmraid/Config.in
+++ b/buildroot/package/dmraid/Config.in
@@ -12,6 +12,8 @@ config BR2_PACKAGE_DMRAID
 	  dmraid uses the Linux device-mapper to create devices with
 	  respective mappings for the ATARAID sets discovered.
 
+	  http://people.redhat.com/~heinzm/sw/dmraid/
+
 comment "dmraid needs a toolchain w/ threads, dynamic library"
 	depends on BR2_USE_MMU
 	depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/docker-cli/docker-cli.hash b/buildroot/package/docker-cli/docker-cli.hash
index e8af45cce..44f13c8bf 100644
--- a/buildroot/package/docker-cli/docker-cli.hash
+++ b/buildroot/package/docker-cli/docker-cli.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256	02bcb73dde1c9542fa65c8b87078aaa1b01b0dbdd62346637bcf0999a2a0909f  docker-cli-v18.09.6.tar.gz
+sha256	00d06baf4793794c0fd9ecad5b7e95aed6eb942f24c8b6e2d7c7f7564b9743ad  docker-cli-19.03.5.tar.gz
 sha256	2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0  LICENSE
diff --git a/buildroot/package/docker-cli/docker-cli.mk b/buildroot/package/docker-cli/docker-cli.mk
index b71bd7097..4ad30e027 100644
--- a/buildroot/package/docker-cli/docker-cli.mk
+++ b/buildroot/package/docker-cli/docker-cli.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-DOCKER_CLI_VERSION = v18.09.6
-DOCKER_CLI_SITE = $(call github,docker,cli,$(DOCKER_CLI_VERSION))
+DOCKER_CLI_VERSION = 19.03.5
+DOCKER_CLI_SITE = $(call github,docker,cli,v$(DOCKER_CLI_VERSION))
 DOCKER_CLI_WORKSPACE = gopath
 
 DOCKER_CLI_LICENSE = Apache-2.0
diff --git a/buildroot/package/docker-containerd/docker-containerd.hash b/buildroot/package/docker-containerd/docker-containerd.hash
index 163a519d3..aad74089e 100644
--- a/buildroot/package/docker-containerd/docker-containerd.hash
+++ b/buildroot/package/docker-containerd/docker-containerd.hash
@@ -1,3 +1,3 @@
 # Computed locally
-sha256	7179c709a0d187708a1eeddcbdecd7206b2c642dc4413bcdb049cd6b38d06801  docker-containerd-v1.2.7.tar.gz
-sha256  4bbe3b885e8cd1907ab4cf9a41e862e74e24b5422297a4f2fe524e6a30ada2b4	LICENSE
+sha256	6a4192fced10c390373adfa9fa9a4f12fe9f38bde580d90468a79ed6c8af75ee  docker-containerd-1.2.11.tar.gz
+sha256  4bbe3b885e8cd1907ab4cf9a41e862e74e24b5422297a4f2fe524e6a30ada2b4  LICENSE
diff --git a/buildroot/package/docker-containerd/docker-containerd.mk b/buildroot/package/docker-containerd/docker-containerd.mk
index 4c0877ecd..4dc0ef467 100644
--- a/buildroot/package/docker-containerd/docker-containerd.mk
+++ b/buildroot/package/docker-containerd/docker-containerd.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-DOCKER_CONTAINERD_VERSION = v1.2.7
-DOCKER_CONTAINERD_SITE = $(call github,containerd,containerd,$(DOCKER_CONTAINERD_VERSION))
+DOCKER_CONTAINERD_VERSION = 1.2.11
+DOCKER_CONTAINERD_SITE = $(call github,containerd,containerd,v$(DOCKER_CONTAINERD_VERSION))
 DOCKER_CONTAINERD_LICENSE = Apache-2.0
 DOCKER_CONTAINERD_LICENSE_FILES = LICENSE
 
diff --git a/buildroot/package/docker-engine/0001-Fix-faulty-runc-version-commit-scrape.patch b/buildroot/package/docker-engine/0001-Fix-faulty-runc-version-commit-scrape.patch
deleted file mode 100644
index dc47a8f9e..000000000
--- a/buildroot/package/docker-engine/0001-Fix-faulty-runc-version-commit-scrape.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 324e7be4b252c13002bca6a9d82e7b2e43664634 Mon Sep 17 00:00:00 2001
-From: Christian Stewart 
-Date: Mon, 26 Nov 2018 22:59:32 -0800
-Subject: [PATCH] Fix faulty runc version commit scrape
-
-This commit replaces faulty logic to determine the runc version commit hash.
-
-The original logic takes the second line of the output of "runc --version" and
-does not work if there are a different number of lines printed from the command
-than expected. The buildroot version of runc outputs two lines instead of the
-expected three, causing the error:
-
-unknown output format: runc version commit: ...
-
-This patch replaces this logic with a simple scan of the "runc --version"
-output, searching for the "runc version commit" prefixed line.
-
-Signed-off-by: Christian Stewart 
----
- daemon/info_unix.go | 9 +++++----
- 1 file changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/daemon/info_unix.go b/daemon/info_unix.go
-index 60b2f99870..688a510796 100644
---- a/daemon/info_unix.go
-+++ b/daemon/info_unix.go
-@@ -32,10 +32,11 @@ func (daemon *Daemon) fillPlatformInfo(v *types.Info, sysInfo *sysinfo.SysInfo)
- 	defaultRuntimeBinary := daemon.configStore.GetRuntime(v.DefaultRuntime).Path
- 	if rv, err := exec.Command(defaultRuntimeBinary, "--version").Output(); err == nil {
- 		parts := strings.Split(strings.TrimSpace(string(rv)), "\n")
--		if len(parts) == 3 {
--			parts = strings.Split(parts[1], ": ")
--			if len(parts) == 2 {
--				v.RuncCommit.ID = strings.TrimSpace(parts[1])
-+		for _, pt := range parts {
-+			ptKv := strings.Split(pt, ":")
-+			if strings.HasSuffix(strings.TrimSpace(ptKv[0]), "commit") {
-+				v.RuncCommit.ID = strings.TrimSpace(ptKv[1])
-+				break
- 			}
- 		}
- 
--- 
-2.18.1
-
diff --git a/buildroot/package/docker-engine/docker-engine.hash b/buildroot/package/docker-engine/docker-engine.hash
index 4e673f285..1f1643d37 100644
--- a/buildroot/package/docker-engine/docker-engine.hash
+++ b/buildroot/package/docker-engine/docker-engine.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256	7cb45266fff79245c81ec86c455d4b0513ca5d4ec1b9be8c8330df30a9467481  docker-engine-v18.09.6.tar.gz
-sha256	2d81ea060825006fc8f3fe28aa5dc0ffeb80faf325b612c955229157b8c10dc0  LICENSE
+sha256	bc5d1ac503e44593be8003ed0ad9c75bf0da535db19837a9338429c438bd4637  docker-engine-19.03.5.tar.gz
+sha256	7c87873291f289713ac5df48b1f2010eb6963752bbd6b530416ab99fc37914a8  LICENSE
diff --git a/buildroot/package/docker-engine/docker-engine.mk b/buildroot/package/docker-engine/docker-engine.mk
index 4a14baaf9..b0eaae958 100644
--- a/buildroot/package/docker-engine/docker-engine.mk
+++ b/buildroot/package/docker-engine/docker-engine.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-DOCKER_ENGINE_VERSION = v18.09.6
-DOCKER_ENGINE_SITE = $(call github,docker,engine,$(DOCKER_ENGINE_VERSION))
+DOCKER_ENGINE_VERSION = 19.03.5
+DOCKER_ENGINE_SITE = $(call github,docker,engine,v$(DOCKER_ENGINE_VERSION))
 
 DOCKER_ENGINE_LICENSE = Apache-2.0
 DOCKER_ENGINE_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/docker-proxy/docker-proxy.hash b/buildroot/package/docker-proxy/docker-proxy.hash
index 3ec184f54..58de69792 100644
--- a/buildroot/package/docker-proxy/docker-proxy.hash
+++ b/buildroot/package/docker-proxy/docker-proxy.hash
@@ -1,2 +1,3 @@
 # Locally calculated
-sha256	2eee331b6ded567a36e7db708405b34032b93938682cf049025f48b96d755bf6	docker-proxy-7b2b1feb1de4817d522cc372af149ff48d25028e.tar.gz
+sha256	866c8d196b9396a383b437b0d775476459ed7c11f527c4f6bbf1fd08524b461d	docker-proxy-55685ba49593e67f5e1c8180539379b16736c25e.tar.gz
+sha256  cb5e8e7e5f4a3988e1063c142c60dc2df75605f4c46515e776e3aca6df976e14	LICENSE
diff --git a/buildroot/package/docker-proxy/docker-proxy.mk b/buildroot/package/docker-proxy/docker-proxy.mk
index dfa9d4347..8843266c3 100644
--- a/buildroot/package/docker-proxy/docker-proxy.mk
+++ b/buildroot/package/docker-proxy/docker-proxy.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DOCKER_PROXY_VERSION = 7b2b1feb1de4817d522cc372af149ff48d25028e
+DOCKER_PROXY_VERSION = 55685ba49593e67f5e1c8180539379b16736c25e
 DOCKER_PROXY_SITE = $(call github,docker,libnetwork,$(DOCKER_PROXY_VERSION))
 
 DOCKER_PROXY_LICENSE = Apache-2.0
diff --git a/buildroot/package/domoticz/0003-CMakeLists.txt-add-c-argument-to-build-precompiled-h.patch b/buildroot/package/domoticz/0003-CMakeLists.txt-add-c-argument-to-build-precompiled-h.patch
new file mode 100644
index 000000000..b14f4c56c
--- /dev/null
+++ b/buildroot/package/domoticz/0003-CMakeLists.txt-add-c-argument-to-build-precompiled-h.patch
@@ -0,0 +1,34 @@
+From 17107b876fb308e3ef3e759ab90f3d8e4755cdc4 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Fri, 8 Nov 2019 14:17:58 +0100
+Subject: [PATCH] CMakeLists.txt: add -c argument to build precompiled headers
+
+Add "-c" argument when building precompiler headers as suggested
+by Arnout in https://patchwork.ozlabs.org/patch/1187328.
+
+This will fix the build with RELRO
+
+Signed-off-by: Fabrice Fontaine 
+[Retrieved from:
+https://github.com/domoticz/domoticz/commit/17107b876fb308e3ef3e759ab90f3d8e4755cdc4]
+---
+ CMakeLists.txt | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 32a0dd2a8c..010cdf2db8 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -277,10 +277,10 @@ MACRO(ADD_PRECOMPILED_HEADER _targetName _input)
+     ENDFOREACH(item)
+ 
+     SEPARATE_ARGUMENTS(_compiler_FLAGS)
+-    MESSAGE("${CMAKE_CXX_COMPILER} ${CMAKE_CXX_COMPILER_ARG1} ${_compiler_FLAGS} -x c++-header -o ${_output} ${_source}")
++    MESSAGE("${CMAKE_CXX_COMPILER} ${CMAKE_CXX_COMPILER_ARG1} ${_compiler_FLAGS} -x c++-header -c -o ${_output} ${_source}")
+     ADD_CUSTOM_COMMAND(
+       OUTPUT ${_output}
+-      COMMAND ${CMAKE_CXX_COMPILER} ${CMAKE_CXX_COMPILER_ARG1} ${_compiler_FLAGS} -x c++-header -o ${_output} ${_source}
++      COMMAND ${CMAKE_CXX_COMPILER} ${CMAKE_CXX_COMPILER_ARG1} ${_compiler_FLAGS} -x c++-header -c -o ${_output} ${_source}
+       DEPENDS ${_source} )
+     ADD_CUSTOM_TARGET(${_targetName}_gch DEPENDS ${_output})
+     ADD_DEPENDENCIES(${_targetName} ${_targetName}_gch)
diff --git a/buildroot/package/doom-wad/Config.in b/buildroot/package/doom-wad/Config.in
index 6f51cfb93..9ef4e3e5a 100644
--- a/buildroot/package/doom-wad/Config.in
+++ b/buildroot/package/doom-wad/Config.in
@@ -7,3 +7,5 @@ config BR2_PACKAGE_DOOM_WAD
 
 	  The wad file will be placed in the /usr/share/games/doom
 	  directory.
+
+	  https://doomwiki.org/wiki/DOOM1.WAD
diff --git a/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.hash b/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.hash
index f2b8720c6..eac675505 100644
--- a/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.hash
+++ b/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.hash
@@ -1,3 +1,3 @@
 # Locally computed after checking signature
-sha256 7c2fe7e23e732a8451172c00da5f19532448c95e03e44d47c61b123e8210f5b8  dovecot-2.3-pigeonhole-0.5.6.tar.gz
+sha256 d59d0c5c5225a126e5b98bf95d75e8dd368bdeeb3da2e9766dbe4fddaa9411b0  dovecot-2.3-pigeonhole-0.5.7.2.tar.gz
 sha256 fc9e9522216f2a9a28b31300e3c73c1df56acc27dfae951bf516e7995366b51a  COPYING
diff --git a/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.mk b/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
index 1568cbc14..43519499c 100644
--- a/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
+++ b/buildroot/package/dovecot-pigeonhole/dovecot-pigeonhole.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-DOVECOT_PIGEONHOLE_VERSION = 0.5.6
+DOVECOT_PIGEONHOLE_VERSION = 0.5.7.2
 DOVECOT_PIGEONHOLE_SOURCE = dovecot-2.3-pigeonhole-$(DOVECOT_PIGEONHOLE_VERSION).tar.gz
 DOVECOT_PIGEONHOLE_SITE = https://pigeonhole.dovecot.org/releases/2.3
 DOVECOT_PIGEONHOLE_LICENSE = LGPL-2.1
diff --git a/buildroot/package/dovecot/dovecot.hash b/buildroot/package/dovecot/dovecot.hash
index a57e51405..3d78af009 100644
--- a/buildroot/package/dovecot/dovecot.hash
+++ b/buildroot/package/dovecot/dovecot.hash
@@ -1,5 +1,5 @@
 # Locally computed after checking signature
-sha256 ed1d8dc1beeae9c6c73deac73a62ef19fe9262fbffd86604a3f690452f5536c7  dovecot-2.3.6.tar.gz
+sha256 666ce084760a47e601d49a9be3c7993c48789d332631e8dfb45f443b367b1260  dovecot-2.3.7.2.tar.gz
 sha256 a363b132e494f662d98c820d1481297e6ae72f194c2c91b6c39e1518b86240a8  COPYING
 sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551  COPYING.LGPL
 sha256 52b8c95fabb19575281874b661ef7968ea47e8f5d74ba0dd40ce512e52b3fc97  COPYING.MIT
diff --git a/buildroot/package/dovecot/dovecot.mk b/buildroot/package/dovecot/dovecot.mk
index 78bc41bff..65c2bcef6 100644
--- a/buildroot/package/dovecot/dovecot.mk
+++ b/buildroot/package/dovecot/dovecot.mk
@@ -5,8 +5,8 @@
 ################################################################################
 
 DOVECOT_VERSION_MAJOR = 2.3
-DOVECOT_VERSION = $(DOVECOT_VERSION_MAJOR).6
-DOVECOT_SITE = https://www.dovecot.org/releases/$(DOVECOT_VERSION_MAJOR)
+DOVECOT_VERSION = $(DOVECOT_VERSION_MAJOR).7.2
+DOVECOT_SITE = https://dovecot.org/releases/$(DOVECOT_VERSION_MAJOR)
 DOVECOT_INSTALL_STAGING = YES
 DOVECOT_LICENSE = LGPL-2.1, MIT, Public Domain, BSD-3-Clause, Unicode-DFS-2015
 DOVECOT_LICENSE_FILES = COPYING COPYING.LGPL COPYING.MIT
@@ -64,6 +64,13 @@ else
 DOVECOT_CONF_OPTS += --without-sodium
 endif
 
+ifeq ($(BR2_PACKAGE_LINUX_PAM),y)
+DOVECOT_CONF_OPTS += --with-pam
+DOVECOT_DEPENDENCIES += linux-pam
+else
+DOVECOT_CONF_OPTS += --without-pam
+endif
+
 ifeq ($(BR2_PACKAGE_DOVECOT_MYSQL),y)
 DOVECOT_CONF_ENV += MYSQL_CONFIG="$(STAGING_DIR)/usr/bin/mysql_config"
 DOVECOT_CONF_OPTS += --with-mysql
diff --git a/buildroot/package/dropbear/0003-Fix-for-issue-successfull-login-of-disabled-user-78.patch b/buildroot/package/dropbear/0003-Fix-for-issue-successfull-login-of-disabled-user-78.patch
new file mode 100644
index 000000000..b3cec4c08
--- /dev/null
+++ b/buildroot/package/dropbear/0003-Fix-for-issue-successfull-login-of-disabled-user-78.patch
@@ -0,0 +1,35 @@
+From a0aa2749813331134452f80bb8a808bdc871ba41 Mon Sep 17 00:00:00 2001
+From: vincentto13 <33652988+vincentto13@users.noreply.github.com>
+Date: Wed, 20 Mar 2019 15:03:40 +0100
+Subject: [PATCH] Fix for issue successfull login of disabled user (#78)
+
+This commit introduces fix for scenario:
+1. Root login disabled on dropbear
+2. PAM authentication model enabled
+
+While login as root user, after prompt for password
+user is being notified about login failrue, but
+after second attempt of prompt for password within
+same session, login becames succesfull.
+
+Signed-off-by: Pawel Rapkiewicz 
+Signed-off-by: Peter Korsgaard 
+---
+ svr-authpam.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/svr-authpam.c b/svr-authpam.c
+index d201bc9..e236db4 100644
+--- a/svr-authpam.c
++++ b/svr-authpam.c
+@@ -275,6 +275,7 @@ void svr_auth_pam(int valid_user) {
+ 		/* PAM auth succeeded but the username isn't allowed in for another reason
+ 		(checkusername() failed) */
+ 		send_msg_userauth_failure(0, 1);
++		goto cleanup;
+ 	}
+ 
+ 	/* successful authentication */
+-- 
+2.11.0
+
diff --git a/buildroot/package/duma/0004-Fix-build-with-latest-glibc.patch b/buildroot/package/duma/0004-Fix-build-with-latest-glibc.patch
new file mode 100644
index 000000000..2d73d7ae5
--- /dev/null
+++ b/buildroot/package/duma/0004-Fix-build-with-latest-glibc.patch
@@ -0,0 +1,22 @@
+Fix build with latest glibc
+
+Fixes:
+ - http://autobuild.buildroot.net/results/c7de1a1d01edced2098a804ad87dcb67b5dc6832
+
+Signed-off-by: Fabrice Fontaine 
+
+diff -durN duma_2_5_15.orig/print.c duma_2_5_15/print.c
+--- duma_2_5_15.orig/print.c	2019-10-28 10:21:14.080149620 +0100
++++ duma_2_5_15/print.c	2019-10-28 10:22:01.256151561 +0100
+@@ -326,9 +326,9 @@
+   if(DUMA_OUTPUT_FILE != NULL)
+   {
+ #if defined(WIN32) && !defined(__CYGWIN__)
+-    fd = _open(DUMA_OUTPUT_FILE, _O_APPEND|_O_CREAT|_O_WRONLY);
++    fd = _open(DUMA_OUTPUT_FILE, _O_APPEND|_O_CREAT|_O_WRONLY, 0600);
+ #else
+-    fd = open(DUMA_OUTPUT_FILE, O_APPEND|O_CREAT|O_WRONLY);
++    fd = open(DUMA_OUTPUT_FILE, O_APPEND|O_CREAT|O_WRONLY, 0600);
+ #endif
+     if ( fd >= 0 )
+     {
diff --git a/buildroot/package/e2fsprogs/e2fsprogs.hash b/buildroot/package/e2fsprogs/e2fsprogs.hash
index 7619e2627..c9018715c 100644
--- a/buildroot/package/e2fsprogs/e2fsprogs.hash
+++ b/buildroot/package/e2fsprogs/e2fsprogs.hash
@@ -1,5 +1,5 @@
-# From https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.44.5/sha256sums.asc
-sha256 ba5eb3069d69160d96818bb9700de9ab5a8458d9add1fd85d427c0000d34c5b9  e2fsprogs-1.44.5.tar.xz
+# https://mirrors.edge.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.45.4/sha256sums.asc
+sha256 65faf6b590ca1da97440d6446bd11de9e0914b42553740ba5d9d2a796fa0dc02  e2fsprogs-1.45.4.tar.xz
 # Locally calculated
 sha256 5da5ef153e559c1d990d4c3eedbedd4442db892d37eae1f35fff069de8ec9020  NOTICE
 sha256 032989b508f1a72ebee5b3417e55d06d473f9ee203e45ab11864a7e49cdec63d  lib/ss/mit-sipb-copyright.h
diff --git a/buildroot/package/e2fsprogs/e2fsprogs.mk b/buildroot/package/e2fsprogs/e2fsprogs.mk
index f5785ab4f..28fd78047 100644
--- a/buildroot/package/e2fsprogs/e2fsprogs.mk
+++ b/buildroot/package/e2fsprogs/e2fsprogs.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-E2FSPROGS_VERSION = 1.44.5
+E2FSPROGS_VERSION = 1.45.4
 E2FSPROGS_SOURCE = e2fsprogs-$(E2FSPROGS_VERSION).tar.xz
 E2FSPROGS_SITE = $(BR2_KERNEL_MIRROR)/linux/kernel/people/tytso/e2fsprogs/v$(E2FSPROGS_VERSION)
 E2FSPROGS_LICENSE = GPL-2.0, MIT-like with advertising clause (libss and libet)
@@ -28,7 +28,8 @@ HOST_E2FSPROGS_CONF_OPTS = \
 	--disable-libuuid \
 	--disable-testio-debug \
 	--enable-symlink-install \
-	--enable-elf-shlibs
+	--enable-elf-shlibs \
+	--with-crond-dir=no
 
 # Set the binary directories to "/bin" and "/sbin", as busybox does,
 # so that we do not end up with two versions of e2fs tools.
diff --git a/buildroot/package/easy-rsa/Config.in b/buildroot/package/easy-rsa/Config.in
index 883d679e9..56db64a59 100644
--- a/buildroot/package/easy-rsa/Config.in
+++ b/buildroot/package/easy-rsa/Config.in
@@ -1,7 +1,8 @@
 config BR2_PACKAGE_EASY_RSA
 	bool "easy-rsa"
 	select BR2_PACKAGE_OPENSSL # runtime
-	select BR2_PACKAGE_OPENSSL_BIN
+	select BR2_PACKAGE_LIBOPENSSL_BIN if BR2_PACKAGE_LIBOPENSSL
+	select BR2_PACKAGE_LIBRESSL_BIN if BR2_PACKAGE_LIBRESSL
 	help
 	  Simple shell based CA utility
 
diff --git a/buildroot/package/ebtables/ebtables.mk b/buildroot/package/ebtables/ebtables.mk
index aae0c91a1..7b2264703 100644
--- a/buildroot/package/ebtables/ebtables.mk
+++ b/buildroot/package/ebtables/ebtables.mk
@@ -19,19 +19,15 @@ endef
 
 ifeq ($(BR2_STATIC_LIBS),y)
 define EBTABLES_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 0755 -D $(@D)/$(EBTABLES_SUBDIR)/static \
-		$(TARGET_DIR)/sbin/ebtables
+	$(INSTALL) -m 0755 -D $(@D)/static $(TARGET_DIR)/sbin/ebtables
 endef
 else
 define EBTABLES_INSTALL_TARGET_CMDS
-	for so in $(@D)/$(EBTABLES_SUBDIR)/*.so \
-		$(@D)/$(EBTABLES_SUBDIR)/extensions/*.so; \
-		do \
+	for so in $(@D)/*.so $(@D)/extensions/*.so; do \
 		$(INSTALL) -m 0755 -D $${so} \
 			$(TARGET_DIR)/lib/ebtables/`basename $${so}` || exit 1; \
 	done
-	$(INSTALL) -m 0755 -D $(@D)/$(EBTABLES_SUBDIR)/ebtables \
-		$(TARGET_DIR)/sbin/ebtables
+	$(INSTALL) -m 0755 -D $(@D)/ebtables $(TARGET_DIR)/sbin/ebtables
 	$(INSTALL) -m 0644 -D $(@D)/ethertypes $(TARGET_DIR)/etc/ethertypes
 endef
 endif
diff --git a/buildroot/package/ecryptfs-utils/0003-fix-parallel-build-issue.patch b/buildroot/package/ecryptfs-utils/0003-fix-parallel-build-issue.patch
new file mode 100644
index 000000000..e2aa740d5
--- /dev/null
+++ b/buildroot/package/ecryptfs-utils/0003-fix-parallel-build-issue.patch
@@ -0,0 +1,61 @@
+fix parallel build issue
+
+Build randomly fails since December 2017 on buildroot
+(http://autobuild.buildroot.org/?reason=ecryptfs-utils-111):
+
+make[5]: Entering directory '/home/buildroot/autobuild/instance-2/output-1/build/ecryptfs-utils-111/src/utils'
+  /bin/mkdir -p '/home/buildroot/autobuild/instance-2/output-1/target/sbin'
+  /bin/bash ../../libtool   --mode=install /usr/bin/install -c mount.ecryptfs umount.ecryptfs mount.ecryptfs_private '/home/buildroot/autobuild/instance-2/output-1/target/sbin'
+libtool: install: /usr/bin/install -c mount.ecryptfs /home/buildroot/autobuild/instance-2/output-1/target/sbin/mount.ecryptfs
+/usr/bin/install: cannot create regular file '/home/buildroot/autobuild/instance-2/output-1/target/sbin/mount.ecryptfs': File exists
+Makefile:832: recipe for target 'install-rootsbinPROGRAMS' failed
+make[5]: *** [install-rootsbinPROGRAMS] Error 1
+
+As spotted by Thomas Petazzoni, build failure happens because of the
+following line in src/utils/Makefile.am:
+
+install-exec-hook:      install-rootsbinPROGRAMS
+        -rm -f "$(DESTDIR)/$(rootsbindir)/umount.ecryptfs_private"
+        $(LN_S) "mount.ecryptfs_private" "$(DESTDIR)/$(rootsbindir)/umount.ecryptfs_private"
+
+The install-exec-hook target should not have a dependency on
+install-rootsbinPROGRAMS.
+
+From https://www.gnu.org/software/automake/manual/html_node/Extending.html#Extending:
+
+"""
+In contrast, some rules also have a way to run another rule, called a
+hook; hooks are always executed after the main rule’s work is done. The
+hook is named after the principal target, with ‘-hook’ appended. The
+targets allowing hooks are install-data, install-exec, uninstall, dist,
+and distcheck.
+
+For instance, here is how to create a hard link to an installed program:
+
+install-exec-hook:
+        ln $(DESTDIR)$(bindir)/program$(EXEEXT) \
+           $(DESTDIR)$(bindir)/proglink$(EXEEXT)
+
+"""
+
+So, they explicitly say that these hooks are run after the main rule
+work is done, which means the dependency on install-rootsbinPROGRAMS is
+not needed. And the example they use to illustrate is *exactly* the
+situation of ecryptfs-utils: creating a link to a program that was
+installed.
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status: https://bugs.launchpad.net/ecryptfs/+bug/1857622]
+
+diff -Nuar ecryptfs-utils-111-orig/src/utils/Makefile.in ecryptfs-utils-111/src/utils/Makefile.in
+--- ecryptfs-utils-111-orig/src/utils/Makefile.in	2019-12-26 15:14:16.656146065 +0100
++++ ecryptfs-utils-111/src/utils/Makefile.in	2019-12-26 17:36:07.108496164 +0100
+@@ -1522,7 +1522,7 @@
+ .PRECIOUS: Makefile
+ 
+ 
+-install-exec-hook:	install-rootsbinPROGRAMS
++install-exec-hook:
+ 	-rm -f "$(DESTDIR)/$(rootsbindir)/umount.ecryptfs_private"
+ 	$(LN_S) "mount.ecryptfs_private" "$(DESTDIR)/$(rootsbindir)/umount.ecryptfs_private"
+ 
diff --git a/buildroot/package/ecryptfs-utils/Config.in b/buildroot/package/ecryptfs-utils/Config.in
index 6652d33e0..eda884bd1 100644
--- a/buildroot/package/ecryptfs-utils/Config.in
+++ b/buildroot/package/ecryptfs-utils/Config.in
@@ -30,7 +30,7 @@ config BR2_PACKAGE_ECRYPTFS_UTILS
 
 	  http://ecryptfs.org
 
-comment "ecryptfs-utils needs a toolchain w/ threads, wchar, dynami library"
+comment "ecryptfs-utils needs a toolchain w/ threads, wchar, dynamic library"
 	depends on !BR2_microblaze
 	depends on BR2_PACKAGE_LIBNSPR_ARCH_SUPPORT
 	depends on BR2_USE_MMU
diff --git a/buildroot/package/efl/Config.in b/buildroot/package/efl/Config.in
index 05be5aae5..2eb3a1073 100644
--- a/buildroot/package/efl/Config.in
+++ b/buildroot/package/efl/Config.in
@@ -168,7 +168,6 @@ config BR2_PACKAGE_EFL_X_XLIB
 	select BR2_PACKAGE_XLIB_LIBXCURSOR
 	select BR2_PACKAGE_XLIB_LIBXDAMAGE
 	select BR2_PACKAGE_XLIB_LIBXINERAMA
-	select BR2_PACKAGE_XLIB_LIBXP
 	select BR2_PACKAGE_XLIB_LIBXRANDR
 	select BR2_PACKAGE_XLIB_LIBXRENDER
 	select BR2_PACKAGE_XLIB_LIBXSCRNSAVER
diff --git a/buildroot/package/elf2flt/0002-elf2flt-fix-relocations-for-read-only-data.patch b/buildroot/package/elf2flt/0002-elf2flt-fix-relocations-for-read-only-data.patch
new file mode 100644
index 000000000..6cb3a5543
--- /dev/null
+++ b/buildroot/package/elf2flt/0002-elf2flt-fix-relocations-for-read-only-data.patch
@@ -0,0 +1,58 @@
+From 6006e8d789f7a1129414fb3a8c930b094af0cafa Mon Sep 17 00:00:00 2001
+From: Greg Ungerer 
+Date: Wed, 6 Nov 2019 21:19:24 +0100
+Subject: [PATCH] elf2flt: fix relocations for read-only data
+
+Readonly data sections are mapped into the "text" section in the
+elf2flt.ld linker script. The relocation generation code is not handling
+that case properly though, and is actually mapping any data section type
+into the "data" section of the target binary.
+
+This problem case has been detected with elf2flt core dumping when used
+with binutils-2.33.1 (on ARM architecture targets). See thread at:
+
+   https://sourceware.org/ml/binutils/2019-10/msg00132.html
+
+Tested by Christophe Priouzeau [1]
+
+* binutils 2.33.1
+* buildroot 2019.11-rc1
+* patch on top of elf2flt (patch available on this thread)
+* configuration: stm32f469-disco with initramfs configuration on buildroot
+
+Result:
+Build: OK, all the binaries are generated
+Runtime test on stm32f469-disco: OK
+
+[1] https://github.com/uclinux-dev/elf2flt/issues/12
+
+Signed-off-by: Greg Ungerer 
+Signed-off-by: Romain Naour 
+Cc: Christophe Priouzeau 
+---
+ elf2flt.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/elf2flt.c b/elf2flt.c
+index 67f720a..8973cef 100644
+--- a/elf2flt.c
++++ b/elf2flt.c
+@@ -418,10 +418,12 @@ output_relocs (
+ //		continue;
+ 
+ 	/*
+-	 *	Only relocate things in the data sections if we are PIC/GOT.
+-	 *	otherwise do text as well
++	 * Only relocate things in the writable data sections if we are PIC/GOT.
++	 * Otherwise do text (and read only data) as well.
+ 	 */
+-	if ((!pic_with_got || ALWAYS_RELOC_TEXT) && (a->flags & SEC_CODE))
++	if ((!pic_with_got || ALWAYS_RELOC_TEXT) &&
++	    ((a->flags & SEC_CODE) ||
++	    ((a->flags & (SEC_DATA | SEC_READONLY)) == (SEC_DATA | SEC_READONLY))))
+ 		sectionp = text + (a->vma - text_vma);
+ 	else if (a->flags & SEC_DATA)
+ 		sectionp = data + (a->vma - data_vma);
+-- 
+2.21.0
+
diff --git a/buildroot/package/elf2flt/Config.in.host b/buildroot/package/elf2flt/Config.in.host
index b93795baa..d6685a7ff 100644
--- a/buildroot/package/elf2flt/Config.in.host
+++ b/buildroot/package/elf2flt/Config.in.host
@@ -9,3 +9,5 @@ config BR2_PACKAGE_HOST_ELF2FLT
 
 	  This option compiles the required tools and makes the required
 	  modifications on your toolchain (linker).
+
+	  https://github.com/uclinux-dev/elf2flt
diff --git a/buildroot/package/elfutils/0004-libelf-Fix-possible-resource-leak-in-elf-32-64-_updatefile.patch b/buildroot/package/elfutils/0004-libelf-Fix-possible-resource-leak-in-elf-32-64-_updatefile.patch
new file mode 100644
index 000000000..ab76bd7a4
--- /dev/null
+++ b/buildroot/package/elfutils/0004-libelf-Fix-possible-resource-leak-in-elf-32-64-_updatefile.patch
@@ -0,0 +1,32 @@
+From 75e147d0ab85262d9bb2fff093db7ce67dbd4b62 Mon Sep 17 00:00:00 2001
+From: Mark Wielaard 
+Date: Wed, 6 Mar 2019 19:56:54 +0100
+Subject: [PATCH] libelf: Fix possible resource leak in elf[32|64]_updatefile.
+
+When we cannot allocate enough memory to convert the data in
+updatemmap we should free the scns before returning an error.
+
+Signed-off-by: Mark Wielaard 
+[Retrieved (and slightly updated to remove ChangeLog update) from:
+https://sourceware.org/git/?p=elfutils.git;a=patch;h=75e147d0ab85262d9bb2fff093db7ce67dbd4b62]
+Signed-off-by: Fabrice Fontaine 
+---
+ libelf/elf32_updatefile.c | 1 +
+ 2 files changed, 6 insertions(+)
+
+ 	* gelf_xlate.c (__elf_xfctstof): Remove alias.
+diff --git a/libelf/elf32_updatefile.c b/libelf/elf32_updatefile.c
+index 2899c6f..457d18e 100644
+--- a/libelf/elf32_updatefile.c
++++ b/libelf/elf32_updatefile.c
+@@ -365,6 +365,7 @@ __elfw2(LIBELFBITS,updatemmap) (Elf *elf, int change_bo, size_t shnum)
+ 			    char *converted = aligned_alloc (align, size);
+ 			    if (converted == NULL)
+ 			      {
++				free (scns);
+ 				__libelf_seterrno (ELF_E_NOMEM);
+ 				return 1;
+ 			      }
+-- 
+2.9.3
+
diff --git a/buildroot/package/elfutils/0005-libelf-Use-posix_memalign-instead-of-aligned_alloc.patch b/buildroot/package/elfutils/0005-libelf-Use-posix_memalign-instead-of-aligned_alloc.patch
new file mode 100644
index 000000000..70f1f9af2
--- /dev/null
+++ b/buildroot/package/elfutils/0005-libelf-Use-posix_memalign-instead-of-aligned_alloc.patch
@@ -0,0 +1,58 @@
+From 6bd060a23f43a842fbc37dd1bb8d6d7964eda36e Mon Sep 17 00:00:00 2001
+From: Mark Wielaard 
+Date: Thu, 7 Mar 2019 17:31:53 +0100
+Subject: [PATCH] libelf: Use posix_memalign instead of aligned_alloc.
+
+Older glibc might not have aligned_alloc (it is C11).
+Use posix_memalign instead. posix_memalign requires the alignment to
+be a multiple of sizeof (void *). So use malloc for smaller alignments.
+
+Signed-off-by: Mark Wielaard 
+[Retrieved (and slighlty updated to remove ChangeLog update) from:
+https://sourceware.org/git/?p=elfutils.git;a=patch;h=6bd060a23f43a842fbc37dd1bb8d6d7964eda36e]
+Signed-off-by: Fabrice Fontaine 
+---
+ libelf/elf32_updatefile.c | 20 +++++++++++++++++---
+ 2 files changed, 22 insertions(+), 3 deletions(-)
+
+diff --git a/libelf/elf32_updatefile.c b/libelf/elf32_updatefile.c
+index 457d18e..eea51a7 100644
+--- a/libelf/elf32_updatefile.c
++++ b/libelf/elf32_updatefile.c
+@@ -360,16 +360,30 @@ __elfw2(LIBELFBITS,updatemmap) (Elf *elf, int change_bo, size_t shnum)
+ 			else
+ 			  {
+ 			    /* We have to do the conversion on properly
+-			       aligned memory first.  */
++			       aligned memory first.  align is a power of 2,
++			       but posix_memalign only works for alignments
++			       which are a multiple of sizeof (void *).
++			       So use normal malloc for smaller alignments.  */
+ 			    size_t size = dl->data.d.d_size;
+-			    char *converted = aligned_alloc (align, size);
++			    void *converted;
++			    if (align < sizeof (void *))
++			      converted = malloc (size);
++			    else
++			      {
++				int res;
++				res = posix_memalign (&converted, align, size);
++				if (res != 0)
++				  converted = NULL;
++			      }
++
+ 			    if (converted == NULL)
+ 			      {
+ 				free (scns);
+ 				__libelf_seterrno (ELF_E_NOMEM);
+ 				return 1;
+ 			      }
+-                            (*fctp) (converted, dl->data.d.d_buf, size, 1);
++
++			    (*fctp) (converted, dl->data.d.d_buf, size, 1);
+ 
+ 			    /* And then write it to the mmapped file.  */
+ 			    memcpy (last_position, converted, size);
+-- 
+2.9.3
+
diff --git a/buildroot/package/elfutils/elfutils.hash b/buildroot/package/elfutils/elfutils.hash
index 5a76cd586..15dddc2fd 100644
--- a/buildroot/package/elfutils/elfutils.hash
+++ b/buildroot/package/elfutils/elfutils.hash
@@ -1,5 +1,5 @@
-# From https://sourceware.org/elfutils/ftp/0.174/sha512.sum
-sha512 696708309c2a9a076099748809ecdc0490f4a8a842b2efc1aae0d746e7c5a8b203743f5626739eff837216b0c052696516b2821f5d3cc3f2eef86597c96d42df  elfutils-0.174.tar.bz2
+# From https://sourceware.org/elfutils/ftp/0.176/sha512.sum
+sha512 7f032913be363a43229ded85d495dcf7542b3c85974aaaba0d984228dc9ac1721da3dc388d3fa02325a80940161db7e9ad2c9e4521a424ad8a7d050c0902915b  elfutils-0.176.tar.bz2
 # Locally calculated
 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903  COPYING
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING-GPLV2
diff --git a/buildroot/package/elfutils/elfutils.mk b/buildroot/package/elfutils/elfutils.mk
index 2d62017bb..ea5486287 100644
--- a/buildroot/package/elfutils/elfutils.mk
+++ b/buildroot/package/elfutils/elfutils.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-ELFUTILS_VERSION = 0.174
+ELFUTILS_VERSION = 0.176
 ELFUTILS_SOURCE = elfutils-$(ELFUTILS_VERSION).tar.bz2
 ELFUTILS_SITE = https://sourceware.org/elfutils/ftp/$(ELFUTILS_VERSION)
 ELFUTILS_INSTALL_STAGING = YES
diff --git a/buildroot/package/eudev/Config.in b/buildroot/package/eudev/Config.in
index 2220265a5..b1d2f37a7 100644
--- a/buildroot/package/eudev/Config.in
+++ b/buildroot/package/eudev/Config.in
@@ -29,8 +29,9 @@ config BR2_PACKAGE_EUDEV_RULES_GEN
 config BR2_PACKAGE_EUDEV_ENABLE_HWDB
 	bool "enable hwdb installation"
 	default y
+	select BR2_PACKAGE_HOST_EUDEV # for udevadm, during target-finalize
 	help
-	  Enables hardware database installation to /etc/udev/hwdb.d
+	  Enables hardware database installation to /etc/udev/hwdb.bin
 
 endif
 
diff --git a/buildroot/package/eudev/Config.in.host b/buildroot/package/eudev/Config.in.host
new file mode 100644
index 000000000..87dfc4391
--- /dev/null
+++ b/buildroot/package/eudev/Config.in.host
@@ -0,0 +1,3 @@
+# Select this if you need host eudev tools (e.g. udevadm)
+config BR2_PACKAGE_HOST_EUDEV
+	bool
diff --git a/buildroot/package/eudev/eudev.mk b/buildroot/package/eudev/eudev.mk
index d88e010c2..e41675d3e 100644
--- a/buildroot/package/eudev/eudev.mk
+++ b/buildroot/package/eudev/eudev.mk
@@ -51,6 +51,44 @@ endef
 # Required by default rules for input devices
 define EUDEV_USERS
 	- - input -1 * - - - Input device group
+	- - render -1 * - - - DRI rendering nodes
+	- - kvm -1 * - - - kvm nodes
 endef
 
+HOST_EUDEV_DEPENDENCIES = host-gperf host-pkgconf
+
+HOST_EUDEV_SYSCONFDIR = $(if $(BR2_PACKAGE_SYSTEMD),/usr/lib,/etc)
+HOST_EUDEV_CONF_OPTS = \
+	--prefix=/usr \
+	--sbindir=/sbin \
+	--libexecdir=/lib \
+	--with-rootlibdir=/lib \
+	--sysconfdir=$(HOST_EUDEV_SYSCONFDIR) \
+	--disable-blkid \
+	--disable-introspection \
+	--disable-kmod \
+	--disable-manpages \
+	--disable-rule-generator \
+	--disable-selinux \
+	--enable-hwdb
+
+define HOST_EUDEV_INSTALL_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/src/udev/udevadm \
+		$(HOST_DIR)/bin/udevadm
+endef
+
+define HOST_EUDEV_BUILD_HWDB
+	$(HOST_DIR)/bin/udevadm hwdb --update --root $(TARGET_DIR)
+endef
+HOST_EUDEV_TARGET_FINALIZE_HOOKS += HOST_EUDEV_BUILD_HWDB
+
+# Note: this will run in the filesystem context, so will use a copy
+# of tharget/, not the real one, so the files are still available on
+# re-builds (foo-rebuild, etc...)
+define HOST_EUDEV_RM_HWDB_SRC
+	rm -rf $(TARGET_DIR)/$(HOST_EUDEV_SYSCONFDIR)/udev/hwdb.d/
+endef
+HOST_EUDEV_ROOTFS_PRE_CMD_HOOKS += HOST_EUDEV_RM_HWDB_SRC
+
 $(eval $(autotools-package))
+$(eval $(host-autotools-package))
diff --git a/buildroot/package/evtest/0001-Add-missing-limits.h-include.patch b/buildroot/package/evtest/0001-Add-missing-limits.h-include.patch
new file mode 100644
index 000000000..6c7fc9048
--- /dev/null
+++ b/buildroot/package/evtest/0001-Add-missing-limits.h-include.patch
@@ -0,0 +1,38 @@
+From 7d7c5a81b0e2f3321d269b7acc450d1eec7a910b Mon Sep 17 00:00:00 2001
+From: Baruch Siach 
+Date: Sun, 18 Aug 2019 09:57:23 +0300
+Subject: [PATCH] Add missing limits.h include
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Fixes build with musl libc that does not include limits.h indirectly via
+other headers.
+
+evtest.c: In function ‘scan_devices’:
+evtest.c:886:14: error: ‘PATH_MAX’ undeclared (first use in this function); did you mean  INT8_MAX’?
+   char fname[PATH_MAX];
+              ^~~~~~~~
+
+Signed-off-by: Baruch Siach 
+---
+Upstream status: sent to input-tools@lists.freedesktop.org (moderated)
+
+ evtest.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/evtest.c b/evtest.c
+index 37d4f8540333..548c203564d3 100644
+--- a/evtest.c
++++ b/evtest.c
+@@ -56,6 +56,7 @@
+ #include 
+ #include 
+ #include 
++#include 
+ #include 
+ #include 
+ #include 
+-- 
+2.23.0.rc1
+
diff --git a/buildroot/package/exfat-utils/exfat-utils.mk b/buildroot/package/exfat-utils/exfat-utils.mk
index 62cd47186..16d5aa03d 100644
--- a/buildroot/package/exfat-utils/exfat-utils.mk
+++ b/buildroot/package/exfat-utils/exfat-utils.mk
@@ -9,4 +9,6 @@ EXFAT_UTILS_SITE = https://github.com/relan/exfat/releases/download/v$(EXFAT_UTI
 EXFAT_UTILS_LICENSE = GPL-3.0+
 EXFAT_UTILS_LICENSE_FILES = COPYING
 
+EXFAT_UTILS_CONF_OPTS += --exec-prefix=/
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/exfat/exfat.mk b/buildroot/package/exfat/exfat.mk
index b52b19706..d8744feb9 100644
--- a/buildroot/package/exfat/exfat.mk
+++ b/buildroot/package/exfat/exfat.mk
@@ -12,4 +12,6 @@ EXFAT_LICENSE = GPL-3.0+
 EXFAT_LICENSE_FILES = COPYING
 EXFAT_CFLAGS = $(TARGET_CFLAGS) -std=c99
 
+EXFAT_CONF_OPTS += --exec-prefix=/
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/exim/0004-glibc.patch b/buildroot/package/exim/0004-glibc.patch
deleted file mode 100644
index 7ae2ef8c7..000000000
--- a/buildroot/package/exim/0004-glibc.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-uClibc does not contain gnu/libc-version.h
-
-Patch sent upstream: https://bugs.exim.org/show_bug.cgi?id=2070
-
-Signed-off-by: Bernd Kuhls 
-
-diff -uNr exim-4.88.org/src/exim.c exim-4.88/src/exim.c
---- exim-4.88.org/src/exim.c	2016-12-18 15:02:28.000000000 +0100
-+++ exim-4.88/src/exim.c	2016-12-26 12:12:57.000000000 +0100
-@@ -12,7 +12,7 @@
- 
- #include "exim.h"
- 
--#ifdef __GLIBC__
-+#if defined(__GLIBC__) && !defined(__UCLIBC__)
- # include 
- #endif
- 
-@@ -1044,7 +1044,7 @@
-   fprintf(f, "Compiler: \n");
- #endif
- 
--#ifdef __GLIBC__
-+#if defined(__GLIBC__) && !defined(__UCLIBC__)
-   fprintf(f, "Library version: Glibc: Compile: %d.%d\n",
- 	       	__GLIBC__, __GLIBC_MINOR__);
-   if (__GLIBC_PREREQ(2, 1))
diff --git a/buildroot/package/exim/0006-remove-libnsl.patch b/buildroot/package/exim/0004-remove-libnsl.patch
similarity index 100%
rename from buildroot/package/exim/0006-remove-libnsl.patch
rename to buildroot/package/exim/0004-remove-libnsl.patch
diff --git a/buildroot/package/exim/0005-Fix-base64d-buffer-size-CVE-2018-6789.patch b/buildroot/package/exim/0005-Fix-base64d-buffer-size-CVE-2018-6789.patch
deleted file mode 100644
index 1811a7ff9..000000000
--- a/buildroot/package/exim/0005-Fix-base64d-buffer-size-CVE-2018-6789.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 062990cc1b2f9e5d82a413b53c8f0569075de700 Mon Sep 17 00:00:00 2001
-From: "Heiko Schlittermann (HS12-RIPE)" 
-Date: Mon, 5 Feb 2018 22:23:32 +0100
-Subject: [PATCH] Fix base64d() buffer size (CVE-2018-6789)
-
-Credits for discovering this bug: Meh Chang 
-
-[Peter: Drop ChangeLog change, fix path]
-Signed-off-by: Peter Korsgaard 
----
- src/base64.c      | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
-diff --git a/src/base64.c b/src/base64.c
-index f6f187f0..e58ca6c7 100644
---- a/src/base64.c
-+++ b/src/base64.c
-@@ -152,10 +152,14 @@ static uschar dec64table[] = {
- int
- b64decode(const uschar *code, uschar **ptr)
- {
-+
- int x, y;
--uschar *result = store_get(3*(Ustrlen(code)/4) + 1);
-+uschar *result;
- 
--*ptr = result;
-+{
-+  int l = Ustrlen(code);
-+  *ptr = result = store_get(1 + l/4 * 3 + l%4);
-+}
- 
- /* Each cycle of the loop handles a quantum of 4 input bytes. For the last
- quantum this may decode to 1, 2, or 3 output bytes. */
--- 
-2.11.0
-
diff --git a/buildroot/package/exim/0005-Fix-uClibc-build.patch b/buildroot/package/exim/0005-Fix-uClibc-build.patch
new file mode 100644
index 000000000..9d5452bb5
--- /dev/null
+++ b/buildroot/package/exim/0005-Fix-uClibc-build.patch
@@ -0,0 +1,35 @@
+From 68ea4fc7ca53bf010e5ec738ad078452f0eaa639 Mon Sep 17 00:00:00 2001
+From: Bernd Kuhls 
+Date: Tue, 23 Jul 2019 18:48:06 +0200
+Subject: [PATCH] Fix uClibc build
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+structs.h:757:18: error: ‘NS_MAXMSG’ undeclared here (not in a function); did you mean ‘N_MASC’?
+   uschar  answer[NS_MAXMSG];      /* the answer itself */
+
+Patch sent upstream: https://github.com/Exim/exim/pull/70
+
+Signed-off-by: Bernd Kuhls 
+---
+ OS/os.h-Linux | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/OS/os.h-Linux b/OS/os.h-Linux
+index 63cf9babd..1d82e9bad 100644
+--- a/OS/os.h-Linux
++++ b/OS/os.h-Linux
+@@ -87,5 +87,9 @@ then change the 0 to 1 in the next block. */
+ # define TCPI_OPT_SYN_DATA 32
+ #endif
+ 
++/* Needed for uClibc */
++#ifndef NS_MAXMSG
++# define NS_MAXMSG 65535
++#endif
+ 
+ /* End */
+-- 
+2.20.1
+
diff --git a/buildroot/package/exim/0006-Fix-buffer-overflow-in-string_vformat.patch b/buildroot/package/exim/0006-Fix-buffer-overflow-in-string_vformat.patch
new file mode 100644
index 000000000..5b022e2fc
--- /dev/null
+++ b/buildroot/package/exim/0006-Fix-buffer-overflow-in-string_vformat.patch
@@ -0,0 +1,44 @@
+From 478effbfd9c3cc5a627fc671d4bf94d13670d65f Mon Sep 17 00:00:00 2001
+From: Jeremy Harris 
+Date: Fri, 27 Sep 2019 12:21:49 +0100
+Subject: [PATCH] Fix buffer overflow in string_vformat.  Bug 2449
+
+Fixes CVE-2019-16928:
+https://lists.exim.org/lurker/message/20190928.003428.2b4c81a7.en.html
+
+Downloaded from upstream commit
+https://git.exim.org/exim.git/patch/478effbfd9c3cc5a627fc671d4bf94d13670d65f
+
+[adjusted patch of string.c and removed patches for test/]
+Signed-off-by: Bernd Kuhls 
+---
+ src/string.c             |  4 ++--
+ scripts/0000-Basic/0214 | 11 +++++++++++
+ stdout/0214             |  7 +++++++
+ 3 files changed, 20 insertions(+), 2 deletions(-)
+
+diff --git a/src/src/string.c b/src/src/string.c
+index c6549bf..3445f8a 100644
+--- a/src/string.c
++++ b/src/string.c
+@@ -1132,7 +1132,7 @@ store_reset(g->s + (g->size = g->ptr + 1));
+ Arguments:
+   g		the growable-string
+   p		current end of data
+-  count		amount to grow by
++  count		amount to grow by, offset from p
+ */
+ 
+ static void
+@@ -1590,7 +1590,7 @@ while (*fp)
+ 	}
+       else if (g->ptr >= lim - width)
+ 	{
+-	gstring_grow(g, g->ptr, width - (lim - g->ptr));
++	gstring_grow(g, g->ptr, width);
+ 	lim = g->size - 1;
+ 	gp = CS g->s + g->ptr;
+ 	}
+-- 
+1.9.1
+
diff --git a/buildroot/package/exim/0007-Fix-CVE-2019-10149.patch b/buildroot/package/exim/0007-Fix-CVE-2019-10149.patch
deleted file mode 100644
index f8b5338b5..000000000
--- a/buildroot/package/exim/0007-Fix-CVE-2019-10149.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From d740d2111f189760593a303124ff6b9b1f83453d Mon Sep 17 00:00:00 2001
-From: Jeremy Harris 
-Date: Mon, 27 May 2019 21:57:31 +0100
-Subject: [PATCH] Fix CVE-2019-10149
-
-[Peter: drop documentation update, fix path]
-Signed-off-by: Peter Korsgaard 
----
- src/deliver.c          | 22 ++++++++++++++--------
- 1 files changed, 52 insertions(+), 8 deletions(-)
- create mode 100644 doc/doc-txt/cve-2019-10149
-
-diff --git a/src/deliver.c b/src/deliver.c
-index 59256ac2..45cc0723 100644
---- a/src/deliver.c
-+++ b/src/deliver.c
-@@ -6227,17 +6227,23 @@ if (process_recipients != RECIP_IGNORE)
- 	{
- 	uschar * save_local =  deliver_localpart;
- 	const uschar * save_domain = deliver_domain;
-+	uschar * addr = new->address, * errmsg = NULL;
-+	int start, end, dom;
- 
--	deliver_localpart = expand_string(
--		      string_sprintf("${local_part:%s}", new->address));
--	deliver_domain =    expand_string(
--		      string_sprintf("${domain:%s}", new->address));
-+	if (!parse_extract_address(addr, &errmsg, &start, &end, &dom, TRUE))
-+	  log_write(0, LOG_MAIN|LOG_PANIC,
-+                "failed to parse address '%.100s': %s\n", addr, errmsg);
-+	else
-+	  {
-+	  deliver_localpart =
-+	    string_copyn(addr+start, dom ? (dom-1) - start : end - start);
-+	  deliver_domain = dom ? CUS string_copyn(addr+dom, end - dom) : CUS"";
- 
--	(void) event_raise(event_action,
--		      US"msg:fail:internal", new->message);
-+	  event_raise(event_action, US"msg:fail:internal", new->message);
- 
--	deliver_localpart = save_local;
--	deliver_domain =    save_domain;
-+	  deliver_localpart = save_local;
-+	  deliver_domain = save_domain;
-+	  }
- 	}
- #endif
-       }
--- 
-2.11.0
-
diff --git a/buildroot/package/exim/exim.hash b/buildroot/package/exim/exim.hash
index 41f51b15e..0d11683c0 100644
--- a/buildroot/package/exim/exim.hash
+++ b/buildroot/package/exim/exim.hash
@@ -1,2 +1,3 @@
 # Locally calculated after checking pgp signature
-sha256 1a21322a10e2da9c0bd6a2a483b6e7ef8fa7f16efcab4c450fd73e7188f5fa94  exim-4.89.1.tar.xz
+sha256 01d7ae481d03ff408f8e54fd9b250324ea5ddabc83b1db32917c7f27a096a654  exim-4.92.2.tar.xz
+sha256 49240db527b7e55b312a46fc59794fde5dd006422e422257f4f057bfd27b3c8f  LICENCE
diff --git a/buildroot/package/exim/exim.mk b/buildroot/package/exim/exim.mk
index bde2df115..b6a8566ce 100644
--- a/buildroot/package/exim/exim.mk
+++ b/buildroot/package/exim/exim.mk
@@ -4,12 +4,12 @@
 #
 ################################################################################
 
-EXIM_VERSION = 4.89.1
+EXIM_VERSION = 4.92.2
 EXIM_SOURCE = exim-$(EXIM_VERSION).tar.xz
-EXIM_SITE = ftp://ftp.exim.org/pub/exim/exim4
+EXIM_SITE = https://ftp.exim.org/pub/exim/exim4
 EXIM_LICENSE = GPL-2.0+
 EXIM_LICENSE_FILES = LICENCE
-EXIM_DEPENDENCIES = pcre berkeleydb host-pkgconf
+EXIM_DEPENDENCIES = host-berkeleydb host-pcre pcre berkeleydb host-pkgconf
 
 # Modify a variable value. It must already exist in the file, either
 # commented or not.
@@ -65,7 +65,7 @@ endef
 endif
 
 ifeq ($(BR2_PACKAGE_OPENSSL),y)
-EXIM_DEPENDENCIES += openssl
+EXIM_DEPENDENCIES += host-openssl openssl
 define EXIM_USE_DEFAULT_CONFIG_FILE_OPENSSL
 	$(call exim-config-change,SUPPORT_TLS,yes)
 	$(call exim-config-change,USE_OPENSSL_PC,openssl)
@@ -111,9 +111,17 @@ ifeq ($(BR2_STATIC_LIBS),y)
 EXIM_STATIC_FLAGS = LFLAGS="-pthread --static"
 endif
 
+# We need the host version of macro_predef during the build, before
+# building it we need to prepare the makefile.
 # "The -j (parallel) flag must not be used with make"
 # (http://www.exim.org/exim-html-current/doc/html/spec_html/ch04.html)
 define EXIM_BUILD_CMDS
+	$(TARGET_MAKE_ENV) build=br $(MAKE1) -C $(@D) makefile
+	$(HOST_MAKE_ENV) $(MAKE1) -C $(@D)/build-br macro_predef \
+		CC=$(HOSTCC) \
+		LNCC=$(HOSTCC) \
+		CFLAGS="$(HOST_CFLAGS)" \
+		LFLAGS="-fPIC $(HOST_LDFLAGS)"
 	$(TARGET_MAKE_ENV) build=br $(MAKE1) -C $(@D) $(EXIM_STATIC_FLAGS)
 endef
 
diff --git a/buildroot/package/expat/expat.hash b/buildroot/package/expat/expat.hash
index 6c55972f6..07faca5e6 100644
--- a/buildroot/package/expat/expat.hash
+++ b/buildroot/package/expat/expat.hash
@@ -1,7 +1,7 @@
-# From https://sourceforge.net/projects/expat/files/expat/2.2.6/
-md5	ca047ae951b40020ac831c28859161b2		expat-2.2.6.tar.bz2
-sha1	c8947fc3119a797b55485f2f7bdaaeb49cc9df01	expat-2.2.6.tar.bz2
+# From https://sourceforge.net/projects/expat/files/expat/2.2.8/
+md5	cdf54239f892fc7914957f10de1e1c70		expat-2.2.8.tar.xz
+sha1	500a848d7085df06020a86bf64c5f71c0052a080	expat-2.2.8.tar.xz
 
 # Locally calculated
-sha256	17b43c2716d521369f82fc2dc70f359860e90fa440bea65b3b85f0b246ea81f2	expat-2.2.6.tar.bz2
+sha256	61caa81a49d858afb2031c7b1a25c97174e7f2009aa1ec4e1ffad2316b91779b	expat-2.2.8.tar.xz
 sha256	46336ab2fec900803e2f1a4253e325ac01d998efb09bc6906651f7259e636f76	COPYING
diff --git a/buildroot/package/expat/expat.mk b/buildroot/package/expat/expat.mk
index 548ec826a..20d0add83 100644
--- a/buildroot/package/expat/expat.mk
+++ b/buildroot/package/expat/expat.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-EXPAT_VERSION = 2.2.6
+EXPAT_VERSION = 2.2.8
 EXPAT_SITE = http://downloads.sourceforge.net/project/expat/expat/$(EXPAT_VERSION)
-EXPAT_SOURCE = expat-$(EXPAT_VERSION).tar.bz2
+EXPAT_SOURCE = expat-$(EXPAT_VERSION).tar.xz
 EXPAT_INSTALL_STAGING = YES
 EXPAT_DEPENDENCIES = host-pkgconf
 HOST_EXPAT_DEPENDENCIES = host-pkgconf
diff --git a/buildroot/package/expect/expect.hash b/buildroot/package/expect/expect.hash
index c89f32390..c4815abb0 100644
--- a/buildroot/package/expect/expect.hash
+++ b/buildroot/package/expect/expect.hash
@@ -1,4 +1,4 @@
-# From https://sourceforge.net/projects/expect/files/Expect/5.45.3/expect5.45.3.tar.gz.SHA256
-sha256  c520717b7195944a69ce1492ec82ca0ac3f3baf060804e6c5ee6d505ea512be9  expect5.45.3.tar.gz
+# From https://sourceforge.net/projects/expect/files/Expect/5.45.4/expect5.45.4.tar.gz.SHA256
+sha256  49a7da83b0bdd9f46d04a04deec19c7767bb9a323e40c4781f89caf760b92c34  expect5.45.4.tar.gz
 # Locally calculated
 sha256  b2415b17dc8d9a287f4509047ef5ac3436baef7ba7c50faef5222dcdf61a2bab  README
diff --git a/buildroot/package/expect/expect.mk b/buildroot/package/expect/expect.mk
index ccde33a71..37b4ce706 100644
--- a/buildroot/package/expect/expect.mk
+++ b/buildroot/package/expect/expect.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-EXPECT_VERSION = 5.45.3
+EXPECT_VERSION = 5.45.4
 EXPECT_SITE = https://sourceforge.net/projects/expect/files/Expect/$(EXPECT_VERSION)
 EXPECT_SOURCE = expect$(EXPECT_VERSION).tar.gz
 EXPECT_LICENSE = Public domain
diff --git a/buildroot/package/faad2/0001-syntax.c-check-for-syntax-element-inconsistencies.patch b/buildroot/package/faad2/0001-syntax.c-check-for-syntax-element-inconsistencies.patch
new file mode 100644
index 000000000..de97dbbaf
--- /dev/null
+++ b/buildroot/package/faad2/0001-syntax.c-check-for-syntax-element-inconsistencies.patch
@@ -0,0 +1,64 @@
+From 466b01d504d7e45f1e9169ac90b3e34ab94aed14 Mon Sep 17 00:00:00 2001
+From: Hugo Lefeuvre 
+Date: Mon, 25 Feb 2019 10:49:03 +0100
+Subject: [PATCH] syntax.c: check for syntax element inconsistencies
+
+Implicit channel mapping reconfiguration is explicitely forbidden by
+ISO/IEC 13818-7:2006 (8.5.3.3). Decoders should be able to detect such
+files and reject them. FAAD2 does not perform any kind of checks
+regarding this.
+
+This leads to security vulnerabilities when processing crafted AAC
+files performing such reconfigurations.
+
+Add checks to decode_sce_lfe and decode_cpe to make sure such
+inconsistencies are detected as early as possible.
+
+These checks first read hDecoder->frame: if this is not the first
+frame then we make sure that the syntax element at the same position
+in the previous frame also had element_id id_syn_ele. If not, return
+21 as this is a fatal file structure issue.
+
+This patch addresses CVE-2018-20362 (fixes #26) and possibly other
+related issues.
+
+Signed-off-by: Baruch Siach 
+---
+Upstream status: commit 466b01d504d7
+
+ libfaad/syntax.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/libfaad/syntax.c b/libfaad/syntax.c
+index f8e808c269c0..e7fb11381e46 100644
+--- a/libfaad/syntax.c
++++ b/libfaad/syntax.c
+@@ -344,6 +344,12 @@ static void decode_sce_lfe(NeAACDecStruct *hDecoder,
+        can become 2 when some form of Parametric Stereo coding is used
+     */
+ 
++    if (hDecoder->frame && hDecoder->element_id[hDecoder->fr_ch_ele] != id_syn_ele) {
++        /* element inconsistency */
++        hInfo->error = 21;
++        return;
++    }
++
+     /* save the syntax element id */
+     hDecoder->element_id[hDecoder->fr_ch_ele] = id_syn_ele;
+ 
+@@ -395,6 +401,12 @@ static void decode_cpe(NeAACDecStruct *hDecoder, NeAACDecFrameInfo *hInfo, bitfi
+         return;
+     }
+ 
++    if (hDecoder->frame && hDecoder->element_id[hDecoder->fr_ch_ele] != id_syn_ele) {
++        /* element inconsistency */
++        hInfo->error = 21;
++        return;
++    }
++
+     /* save the syntax element id */
+     hDecoder->element_id[hDecoder->fr_ch_ele] = id_syn_ele;
+ 
+-- 
+2.20.1
+
diff --git a/buildroot/package/faad2/0002-sbr_hfadj-sanitize-frequency-band-borders.patch b/buildroot/package/faad2/0002-sbr_hfadj-sanitize-frequency-band-borders.patch
new file mode 100644
index 000000000..9c580f933
--- /dev/null
+++ b/buildroot/package/faad2/0002-sbr_hfadj-sanitize-frequency-band-borders.patch
@@ -0,0 +1,71 @@
+From 6b4a7cde30f2e2cb03e78ef476cc73179cfffda3 Mon Sep 17 00:00:00 2001
+From: Hugo Lefeuvre 
+Date: Thu, 11 Apr 2019 09:34:07 +0200
+Subject: [PATCH] sbr_hfadj: sanitize frequency band borders
+
+user passed f_table_lim contains frequency band borders. Frequency
+bands are groups of consecutive QMF channels. This means that their
+bounds, as provided by f_table_lim, should never exceed MAX_M (maximum
+number of QMF channels). c.f. ISO/IEC 14496-3:2001
+
+FAAD2 does not verify this, leading to security issues when
+processing files defining f_table_lim with values > MAX_M.
+
+This patch sanitizes the values of f_table_lim so that they can be safely
+used as index for Q_M_lim and G_lim arrays.
+
+Fixes #21 (CVE-2018-20194).
+
+Signed-off-by: Baruch Siach 
+---
+Upstream status: commit 6b4a7cde30f2e
+
+ libfaad/sbr_hfadj.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/libfaad/sbr_hfadj.c b/libfaad/sbr_hfadj.c
+index 3f310b8190d7..dda1ce8e249b 100644
+--- a/libfaad/sbr_hfadj.c
++++ b/libfaad/sbr_hfadj.c
+@@ -485,6 +485,12 @@ static void calculate_gain(sbr_info *sbr, sbr_hfadj_info *adj, uint8_t ch)
+             ml1 = sbr->f_table_lim[sbr->bs_limiter_bands][k];
+             ml2 = sbr->f_table_lim[sbr->bs_limiter_bands][k+1];
+ 
++            if (ml1 > MAX_M)
++                ml1 = MAX_M;
++
++            if (ml2 > MAX_M)
++                ml2 = MAX_M;
++
+ 
+             /* calculate the accumulated E_orig and E_curr over the limiter band */
+             for (m = ml1; m < ml2; m++)
+@@ -949,6 +955,12 @@ static void calculate_gain(sbr_info *sbr, sbr_hfadj_info *adj, uint8_t ch)
+             ml1 = sbr->f_table_lim[sbr->bs_limiter_bands][k];
+             ml2 = sbr->f_table_lim[sbr->bs_limiter_bands][k+1];
+ 
++            if (ml1 > MAX_M)
++                ml1 = MAX_M;
++
++            if (ml2 > MAX_M)
++                ml2 = MAX_M;
++
+ 
+             /* calculate the accumulated E_orig and E_curr over the limiter band */
+             for (m = ml1; m < ml2; m++)
+@@ -1193,6 +1205,12 @@ static void calculate_gain(sbr_info *sbr, sbr_hfadj_info *adj, uint8_t ch)
+             ml1 = sbr->f_table_lim[sbr->bs_limiter_bands][k];
+             ml2 = sbr->f_table_lim[sbr->bs_limiter_bands][k+1];
+ 
++            if (ml1 > MAX_M)
++                ml1 = MAX_M;
++
++            if (ml2 > MAX_M)
++                ml2 = MAX_M;
++
+ 
+             /* calculate the accumulated E_orig and E_curr over the limiter band */
+             for (m = ml1; m < ml2; m++)
+-- 
+2.20.1
+
diff --git a/buildroot/package/faad2/0003-Fix-a-couple-buffer-overflows.patch b/buildroot/package/faad2/0003-Fix-a-couple-buffer-overflows.patch
new file mode 100644
index 000000000..6ae760877
--- /dev/null
+++ b/buildroot/package/faad2/0003-Fix-a-couple-buffer-overflows.patch
@@ -0,0 +1,50 @@
+From 942c3e0aee748ea6fe97cb2c1aa5893225316174 Mon Sep 17 00:00:00 2001
+From: Fabian Greffrath 
+Date: Mon, 10 Jun 2019 13:58:40 +0200
+Subject: [PATCH] Fix a couple buffer overflows
+
+https://hackerone.com/reports/502816
+https://hackerone.com/reports/507858
+
+https://github.com/videolan/vlc/blob/master/contrib/src/faad2/faad2-fix-overflows.patch
+
+Signed-off-by: Baruch Siach 
+---
+Upstream status: commit 942c3e0aee748ea6
+
+ libfaad/bits.c   | 5 ++++-
+ libfaad/syntax.c | 2 ++
+ 2 files changed, 6 insertions(+), 1 deletion(-)
+
+diff --git a/libfaad/bits.c b/libfaad/bits.c
+index dc14d7a03952..4c0de24a5d9c 100644
+--- a/libfaad/bits.c
++++ b/libfaad/bits.c
+@@ -167,7 +167,10 @@ void faad_resetbits(bitfile *ld, int bits)
+     int words = bits >> 5;
+     int remainder = bits & 0x1F;
+ 
+-    ld->bytes_left = ld->buffer_size - words*4;
++    if (ld->buffer_size < words * 4)
++        ld->bytes_left = 0;
++    else
++        ld->bytes_left = ld->buffer_size - words*4;
+ 
+     if (ld->bytes_left >= 4)
+     {
+diff --git a/libfaad/syntax.c b/libfaad/syntax.c
+index e7fb11381e46..c9925435dbd0 100644
+--- a/libfaad/syntax.c
++++ b/libfaad/syntax.c
+@@ -2304,6 +2304,8 @@ static uint8_t excluded_channels(bitfile *ld, drc_info *drc)
+     while ((drc->additional_excluded_chns[n-1] = faad_get1bit(ld
+         DEBUGVAR(1,104,"excluded_channels(): additional_excluded_chns"))) == 1)
+     {
++        if (i >= MAX_CHANNELS - num_excl_chan - 7)
++            return n;
+         for (i = num_excl_chan; i < num_excl_chan+7; i++)
+         {
+             drc->exclude_mask[i] = faad_get1bit(ld
+-- 
+2.20.1
+
diff --git a/buildroot/package/faad2/0004-add-patch-to-prevent-crash-on-SCE-followed-by-CPE.patch b/buildroot/package/faad2/0004-add-patch-to-prevent-crash-on-SCE-followed-by-CPE.patch
new file mode 100644
index 000000000..b759b037e
--- /dev/null
+++ b/buildroot/package/faad2/0004-add-patch-to-prevent-crash-on-SCE-followed-by-CPE.patch
@@ -0,0 +1,54 @@
+From f1f8e002622196de3aa650163e5dc2888ebc7a63 Mon Sep 17 00:00:00 2001
+From: Fabian Greffrath 
+Date: Mon, 10 Jun 2019 13:59:49 +0200
+Subject: [PATCH] add patch to prevent crash on SCE followed by CPE
+
+hDecoder->element_alloced denotes whether or not we have allocated memory for
+usage in terms of the specified channel element. Given that it previously only
+had two states (1 meaning allocated, and 0 meaning not allocated), it would not
+allocate enough memory for parsing a CPE it if is preceeded by a SCE (and
+therefor crash).
+
+These changes fixes the issue by making sure that we allocate additional memory
+if so is necessary, and the set of values for hDecoder->element_alloced[n] is
+now:
+
+ 0 = nothing allocated
+ 1 = allocated enough for SCE
+ 2 = allocated enough for CPE
+
+All branches that depend on hDecoder->element_alloced[n] prior to this patch
+only checks if the value is, or is not, zero. The added state, 2, is therefor
+correctly handled automatically.
+
+https://github.com/videolan/vlc/blob/master/contrib/src/faad2/faad2-fix-cpe-reconstruction.patch
+
+Signed-off-by: Baruch Siach 
+---
+Upstream status: commit f1f8e002622196d
+ libfaad/specrec.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/libfaad/specrec.c b/libfaad/specrec.c
+index 9797d6e79468..0e72207fc9c0 100644
+--- a/libfaad/specrec.c
++++ b/libfaad/specrec.c
+@@ -1109,13 +1109,13 @@ uint8_t reconstruct_channel_pair(NeAACDecStruct *hDecoder, ic_stream *ics1, ic_s
+ #ifdef PROFILE
+     int64_t count = faad_get_ts();
+ #endif
+-    if (hDecoder->element_alloced[hDecoder->fr_ch_ele] == 0)
++    if (hDecoder->element_alloced[hDecoder->fr_ch_ele] != 2)
+     {
+         retval = allocate_channel_pair(hDecoder, cpe->channel, (uint8_t)cpe->paired_channel);
+         if (retval > 0)
+             return retval;
+ 
+-        hDecoder->element_alloced[hDecoder->fr_ch_ele] = 1;
++        hDecoder->element_alloced[hDecoder->fr_ch_ele] = 2;
+     }
+ 
+     /* dequantisation and scaling */
+-- 
+2.20.1
+
diff --git a/buildroot/package/faifa/0003-Makefile.in-fix-asbolute-symlink-of-libfaifa.so.patch b/buildroot/package/faifa/0003-Makefile.in-fix-asbolute-symlink-of-libfaifa.so.patch
new file mode 100644
index 000000000..876d2a60f
--- /dev/null
+++ b/buildroot/package/faifa/0003-Makefile.in-fix-asbolute-symlink-of-libfaifa.so.patch
@@ -0,0 +1,32 @@
+From d16abf61049947c451a6411a13fc15dda32feb47 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli 
+Date: Sat, 6 Sep 2014 11:23:02 -0700
+Subject: [PATCH] Makefile.in: fix asbolute symlink of libfaifa.so
+
+Fixes #7
+
+Signed-off-by: Florian Fainelli 
+[Upstream: da2e279fd736d05bcd0ee6e4609c44fece017ba8]
+Signed-off-by: Thomas Petazzoni 
+---
+ Makefile.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile.in b/Makefile.in
+index ba65bee..9dec7ee 100644
+--- a/Makefile.in
++++ b/Makefile.in
+@@ -98,9 +98,9 @@ install: installman strip
+ 	$(INSTALL) -m0755 hpav_cfg $(DESTDIR)$(sbindir)
+ 	$(INSTALL) -d $(DESTDIR)$(libdir)
+ 	$(INSTALL) -m0644 $(LIB_SONAME) $(DESTDIR)$(libdir)
+-	ln -sf $(DESTDIR)$(libdir)/$(LIB_SONAME) $(DESTDIR)$(libdir)/$(LIB_SHARED_SO)
+ 	$(INSTALL) -d $(DESTDIR)$(includedir)/faifa
+ 	cp $(HEADERS) $(DESTDIR)$(includedir)/faifa
++	cd $(DESTDIR)$(libdir) && ln -sf $(LIB_SONAME) $(LIB_SHARED_SO)
+ 
+ strip:
+ 	$(STRIP) $(APP)
+-- 
+2.23.0
+
diff --git a/buildroot/package/faifa/Config.in b/buildroot/package/faifa/Config.in
index 753abc67e..486f35d50 100644
--- a/buildroot/package/faifa/Config.in
+++ b/buildroot/package/faifa/Config.in
@@ -10,7 +10,7 @@ config BR2_PACKAGE_FAIFA
 	  Intellon-specific management and control frames as well as
 	  standard management frames.
 
-	  https://dev.open-plc.org
+	  https://github.com/ffainelli/faifa
 
 comment "faifa needs a toolchain w/ dynamic library, threads"
 	depends on BR2_STATIC_LIBS || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/fakeroot/0002-communicate-check-return-status-of-msgrcv.patch b/buildroot/package/fakeroot/0002-communicate-check-return-status-of-msgrcv.patch
index 3bb4f9701..4e81b4912 100644
--- a/buildroot/package/fakeroot/0002-communicate-check-return-status-of-msgrcv.patch
+++ b/buildroot/package/fakeroot/0002-communicate-check-return-status-of-msgrcv.patch
@@ -1,7 +1,7 @@
 From a853f21633693f9eefc4949660253a5328d2d2f3 Mon Sep 17 00:00:00 2001
 From: "Yann E. MORIN" 
 Date: Sun, 13 Aug 2017 23:21:54 +0200
-Subject: [PATCH 1/1] communicate: check return status of msgrcv()
+Subject: [PATCH] communicate: check return status of msgrcv()
 
 msgrcv can return with -1 to indicate an error condition.
 One such error is to have been interrupted by a signal.
diff --git a/buildroot/package/fakeroot/0003-Select-TCP-when-lack-of-SYSV-IPC.patch b/buildroot/package/fakeroot/0003-Select-TCP-when-lack-of-SYSV-IPC.patch
new file mode 100644
index 000000000..07b206b68
--- /dev/null
+++ b/buildroot/package/fakeroot/0003-Select-TCP-when-lack-of-SYSV-IPC.patch
@@ -0,0 +1,77 @@
+From 8e9a7a8c72a9fe407d296ec0ffeb56b2cd271959 Mon Sep 17 00:00:00 2001
+From: Matt Weber 
+Date: Mon, 16 Sep 2019 22:00:29 -0500
+Subject: [PATCH] Select TCP when lack of SYSV IPC
+
+Update to add a configure test to build and install the TCP IPC version
+when detecting SYSV IPC MsgQ support isn't available.
+
+The issue was initially discovered on Windows Services for Linux
+(WSL1.0). WSL does have some SysV IPC, but no message Q's, which is
+required by fakeroot/faked by default.
+
+Fixes:
+https://github.com/Microsoft/WSL/issues/2465
+
+Additional bug reports:
+https://bugs.busybox.net/show_bug.cgi?id=11366
+
+Upstream:
+https://salsa.debian.org/clint/fakeroot/merge_requests/2
+
+Signed-off-by: Jean-Francois Doyon 
+Signed-off-by: Matthew Weber 
+---
+ configure.ac | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+diff --git a/configure.ac b/configure.ac
+index a9189e6..1650f77 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -25,6 +25,42 @@ AC_CACHE_CHECK([which IPC method to use],
+ 	       [ac_cv_use_ipc],
+ 	       [ac_cv_use_ipc=sysv])
+ 
++if test $ac_cv_use_ipc = "sysv"; then
++  AC_MSG_CHECKING([whether SysV IPC message queues are actually working on the host])
++
++  AC_LANG_PUSH(C)
++  AC_TRY_RUN([
++#include 
++#include 
++#include 
++#include 
++#include 
++#include 
++
++int main() {
++
++  srandom(time(NULL)+getpid()*33151);
++  key_t msg_key = random();
++  int msg_get = msgget(msg_key, IPC_CREAT|0600);
++
++  if (msg_get==-1) {
++    return 1;
++  } else {
++    msgctl(msg_get, IPC_RMID, NULL);
++    return 0;
++  }
++
++}], [ac_cv_use_ipc=sysv], [ac_cv_use_ipc=tcp])
++
++  if test $ac_cv_use_ipc = "tcp"; then
++    AC_MSG_RESULT([No, using TCP])
++  else
++    AC_MSG_RESULT([Yes])
++  fi
++
++  AC_LANG_POP(C)
++fi
++
+ AC_ARG_WITH([dbformat],
+ 	    AS_HELP_STRING([--with-dbformat@<:@=DBFORMAT@:>@],
+ 			   [database format to use: either inode (default) or path]),
+-- 
+2.17.1
+
diff --git a/buildroot/package/fakeroot/fakeroot.mk b/buildroot/package/fakeroot/fakeroot.mk
index 4aa27a1b0..1be99071b 100644
--- a/buildroot/package/fakeroot/fakeroot.mk
+++ b/buildroot/package/fakeroot/fakeroot.mk
@@ -15,8 +15,14 @@ HOST_FAKEROOT_DEPENDENCIES = host-acl
 HOST_FAKEROOT_CONF_ENV = \
 	ac_cv_header_sys_capability_h=no \
 	ac_cv_func_capset=no
-
+# 0003-Select-TCP-when-lack-of-SYSV-IPC.patch touches configure.ac
+HOST_FAKEROOT_AUTORECONF = YES
 FAKEROOT_LICENSE = GPL-3.0+
 FAKEROOT_LICENSE_FILES = COPYING
 
+define HOST_FAKEROOT_BUILD_AUX
+	mkdir -p $(@D)/build-aux
+endef
+HOST_FAKEROOT_POST_PATCH_HOOKS += HOST_FAKEROOT_BUILD_AUX
+
 $(eval $(host-autotools-package))
diff --git a/buildroot/package/fastd/Config.in b/buildroot/package/fastd/Config.in
index 47c76b5ad..5ef6de8d7 100644
--- a/buildroot/package/fastd/Config.in
+++ b/buildroot/package/fastd/Config.in
@@ -9,7 +9,7 @@ config BR2_PACKAGE_FASTD
 	help
 	  Fast and Secure Tunneling Daemon
 
-	  https://projects.universe-factory.net/projects/fastd/wiki
+	  https://github.com/NeoRaider/fastd/wiki
 
 if BR2_PACKAGE_FASTD
 
diff --git a/buildroot/package/ffmpeg/ffmpeg.hash b/buildroot/package/ffmpeg/ffmpeg.hash
index e00c4ec56..e945130d8 100644
--- a/buildroot/package/ffmpeg/ffmpeg.hash
+++ b/buildroot/package/ffmpeg/ffmpeg.hash
@@ -1,5 +1,5 @@
 # Locally calculated
-sha256 741cbd6394eaed370774ca4cc089eaafbc54d0824b9aa360d4b3b0cbcbc4a92c  ffmpeg-3.4.5.tar.xz
+sha256 3572279cb139d9e39dcfbc23edf438ff5311ec3fc5d0dcb3558e49591e5cb83e  ffmpeg-3.4.6.tar.xz
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING.GPLv2
 sha256 b634ab5640e258563c536e658cad87080553df6f34f62269a21d554844e58bfe  COPYING.LGPLv2.1
 sha256 73d99bc83313fff665b426d6672b4e0479102bc402fe22314ac9ce94a38aa5ff  LICENSE.md
diff --git a/buildroot/package/ffmpeg/ffmpeg.mk b/buildroot/package/ffmpeg/ffmpeg.mk
index 1e1004c37..d26555a50 100644
--- a/buildroot/package/ffmpeg/ffmpeg.mk
+++ b/buildroot/package/ffmpeg/ffmpeg.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FFMPEG_VERSION = 3.4.5
+FFMPEG_VERSION = 3.4.6
 FFMPEG_SOURCE = ffmpeg-$(FFMPEG_VERSION).tar.xz
 FFMPEG_SITE = http://ffmpeg.org/releases
 FFMPEG_INSTALL_STAGING = YES
diff --git a/buildroot/package/file/0001-Detect-multiplication-overflow-when-computing-sector.patch b/buildroot/package/file/0001-Detect-multiplication-overflow-when-computing-sector.patch
new file mode 100644
index 000000000..c7ef4f2e0
--- /dev/null
+++ b/buildroot/package/file/0001-Detect-multiplication-overflow-when-computing-sector.patch
@@ -0,0 +1,68 @@
+From 06de62c022138f63de9bcd04074491945eaa8662 Mon Sep 17 00:00:00 2001
+From: Christos Zoulas 
+Date: Fri, 23 Aug 2019 14:29:14 +0000
+Subject: [PATCH] Detect multiplication overflow when computing sector position
+ (found by oss-fuzz)
+
+Fixes CVE-2019-18218
+
+Signed-off-by: Peter Korsgaard 
+---
+ src/cdf.c | 20 +++++++++++++++++---
+ 1 file changed, 17 insertions(+), 3 deletions(-)
+
+diff --git a/src/cdf.c b/src/cdf.c
+index 556a3ff8..9d639674 100644
+--- a/src/cdf.c
++++ b/src/cdf.c
+@@ -35,7 +35,7 @@
+ #include "file.h"
+ 
+ #ifndef lint
+-FILE_RCSID("@(#)$File: cdf.c,v 1.114 2019/02/20 02:35:27 christos Exp $")
++FILE_RCSID("@(#)$File: cdf.c,v 1.115 2019/08/23 14:29:14 christos Exp $")
+ #endif
+ 
+ #include 
+@@ -53,6 +53,10 @@ FILE_RCSID("@(#)$File: cdf.c,v 1.114 2019/02/20 02:35:27 christos Exp $")
+ #define EFTYPE EINVAL
+ #endif
+ 
++#ifndef SIZE_T_MAX
++#define SIZE_T_MAX CAST(size_t, ~0ULL)
++#endif
++
+ #include "cdf.h"
+ 
+ #ifdef CDF_DEBUG
+@@ -405,7 +409,12 @@ cdf_read_sector(const cdf_info_t *info, void *buf, size_t offs, size_t len,
+     const cdf_header_t *h, cdf_secid_t id)
+ {
+ 	size_t ss = CDF_SEC_SIZE(h);
+-	size_t pos = CDF_SEC_POS(h, id);
++	size_t pos;
++
++	if (SIZE_T_MAX / ss < CAST(size_t, id))
++		return -1;
++
++	pos = CDF_SEC_POS(h, id);
+ 	assert(ss == len);
+ 	return cdf_read(info, CAST(off_t, pos), RCAST(char *, buf) + offs, len);
+ }
+@@ -415,7 +424,12 @@ cdf_read_short_sector(const cdf_stream_t *sst, void *buf, size_t offs,
+     size_t len, const cdf_header_t *h, cdf_secid_t id)
+ {
+ 	size_t ss = CDF_SHORT_SEC_SIZE(h);
+-	size_t pos = CDF_SHORT_SEC_POS(h, id);
++	size_t pos;
++
++	if (SIZE_T_MAX / ss < CAST(size_t, id))
++		return -1;
++
++	pos = CDF_SHORT_SEC_POS(h, id);
+ 	assert(ss == len);
+ 	if (pos + len > CDF_SEC_SIZE(h) * sst->sst_len) {
+ 		DPRINTF(("Out of bounds read %" SIZE_T_FORMAT "u > %"
+-- 
+2.20.1
+
diff --git a/buildroot/package/file/0002-Limit-the-number-of-elements-in-a-vector-found-by-os.patch b/buildroot/package/file/0002-Limit-the-number-of-elements-in-a-vector-found-by-os.patch
new file mode 100644
index 000000000..6f16894f9
--- /dev/null
+++ b/buildroot/package/file/0002-Limit-the-number-of-elements-in-a-vector-found-by-os.patch
@@ -0,0 +1,62 @@
+From 46a8443f76cec4b41ec736eca396984c74664f84 Mon Sep 17 00:00:00 2001
+From: Christos Zoulas 
+Date: Mon, 26 Aug 2019 14:31:39 +0000
+Subject: [PATCH] Limit the number of elements in a vector (found by oss-fuzz)
+
+Fixes CVE-2019-18218
+
+Signed-off-by: Peter Korsgaard 
+---
+ src/cdf.c | 9 ++++-----
+ src/cdf.h | 1 +
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/src/cdf.c b/src/cdf.c
+index 9d639674..bb81d637 100644
+--- a/src/cdf.c
++++ b/src/cdf.c
+@@ -35,7 +35,7 @@
+ #include "file.h"
+ 
+ #ifndef lint
+-FILE_RCSID("@(#)$File: cdf.c,v 1.115 2019/08/23 14:29:14 christos Exp $")
++FILE_RCSID("@(#)$File: cdf.c,v 1.116 2019/08/26 14:31:39 christos Exp $")
+ #endif
+ 
+ #include 
+@@ -1027,8 +1027,9 @@ cdf_read_property_info(const cdf_stream_t *sst, const cdf_header_t *h,
+ 				goto out;
+ 			}
+ 			nelements = CDF_GETUINT32(q, 1);
+-			if (nelements == 0) {
+-				DPRINTF(("CDF_VECTOR with nelements == 0\n"));
++			if (nelements > CDF_ELEMENT_LIMIT || nelements == 0) {
++				DPRINTF(("CDF_VECTOR with nelements == %"
++				    SIZE_T_FORMAT "u\n", nelements));
+ 				goto out;
+ 			}
+ 			slen = 2;
+@@ -1070,8 +1071,6 @@ cdf_read_property_info(const cdf_stream_t *sst, const cdf_header_t *h,
+ 					goto out;
+ 				inp += nelem;
+ 			}
+-			DPRINTF(("nelements = %" SIZE_T_FORMAT "u\n",
+-			    nelements));
+ 			for (j = 0; j < nelements && i < sh.sh_properties;
+ 			    j++, i++)
+ 			{
+diff --git a/src/cdf.h b/src/cdf.h
+index 2f7e554b..05056668 100644
+--- a/src/cdf.h
++++ b/src/cdf.h
+@@ -48,6 +48,7 @@
+ typedef int32_t cdf_secid_t;
+ 
+ #define CDF_LOOP_LIMIT					10000
++#define CDF_ELEMENT_LIMIT				100000
+ 
+ #define CDF_SECID_NULL					0
+ #define CDF_SECID_FREE					-1
+-- 
+2.20.1
+
diff --git a/buildroot/package/file/file.hash b/buildroot/package/file/file.hash
index 7948e856e..241820d0f 100644
--- a/buildroot/package/file/file.hash
+++ b/buildroot/package/file/file.hash
@@ -1,7 +1,7 @@
 # Locally calculated after verifying signature
-# ftp://ftp.astron.com/pub/file/file-5.36.tar.gz.asc
+# ftp://ftp.astron.com/pub/file/file-5.37.tar.gz.asc
 # using key BE04995BA8F90ED0C0C176C471112AB16CB33B3A
-sha256 fb608290c0fd2405a8f63e5717abf6d03e22e183fb21884413d1edd918184379  file-5.36.tar.gz
+sha256 e9c13967f7dd339a3c241b7710ba093560b9a33013491318e88e6b8b57bae07f  file-5.37.tar.gz
 sha256 0bfa856a9930bddadbef95d1be1cf4e163c0be618e76ea3275caaf255283e274  COPYING
 sha256 4ccb60d623884ef637af4a5bc16b2cb350163e2135e967655837336019a64462  src/mygetopt.h
 sha256 7ac061e1a1c840c4dfa0573aec6f3497676c9295b5ec4190d3576646eb1646bf  src/vasprintf.c
diff --git a/buildroot/package/file/file.mk b/buildroot/package/file/file.mk
index 1a835015a..a13acbc47 100644
--- a/buildroot/package/file/file.mk
+++ b/buildroot/package/file/file.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FILE_VERSION = 5.36
+FILE_VERSION = 5.37
 FILE_SITE = ftp://ftp.astron.com/pub/file
 FILE_DEPENDENCIES = host-file zlib
 HOST_FILE_DEPENDENCIES = host-zlib
diff --git a/buildroot/package/flashbench/Config.in b/buildroot/package/flashbench/Config.in
index 7be1ea9bc..a50f482ac 100644
--- a/buildroot/package/flashbench/Config.in
+++ b/buildroot/package/flashbench/Config.in
@@ -7,4 +7,4 @@ config BR2_PACKAGE_FLASHBENCH
 	  SD cards and other media for the Linaro flash memory
 	  survey.
 
-	  https://wiki.linaro.org/WorkingGroups/KernelConsolidation/Projects/FlashCardSurvey
+	  https://git.linaro.org/people/arnd.bergmann/flashbench.git
diff --git a/buildroot/package/fmt/Config.in b/buildroot/package/fmt/Config.in
index 69a6fb80a..8643c9b5a 100644
--- a/buildroot/package/fmt/Config.in
+++ b/buildroot/package/fmt/Config.in
@@ -7,5 +7,7 @@ config BR2_PACKAGE_FMT
 	  used as a safe alternative to printf or as a fast alternative
 	  to IOStreams.
 
+	  https://fmt.dev
+
 comment "fmt needs a toolchain w/ C++, wchar"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR
diff --git a/buildroot/package/freerdp/freerdp.mk b/buildroot/package/freerdp/freerdp.mk
index 0f32ff471..293b6b5c0 100644
--- a/buildroot/package/freerdp/freerdp.mk
+++ b/buildroot/package/freerdp/freerdp.mk
@@ -50,10 +50,10 @@ FREERDP_CONF_OPTS += -DWITH_ALSA=OFF
 endif
 
 ifeq ($(BR2_PACKAGE_PULSEAUDIO),y)
-FREERDP_CONF_OPTS += -DWITH_PULSEAUDIO=ON
+FREERDP_CONF_OPTS += -DWITH_PULSE=ON
 FREERDP_DEPENDENCIES += pulseaudio
 else
-FREERDP_CONF_OPTS += -DWITH_PULSEAUDIO=OFF
+FREERDP_CONF_OPTS += -DWITH_PULSE=OFF
 endif
 
 # For the systemd journal
diff --git a/buildroot/package/freescale-imx/freescale-imx.mk b/buildroot/package/freescale-imx/freescale-imx.mk
index e8ca77f17..84a1725cc 100644
--- a/buildroot/package/freescale-imx/freescale-imx.mk
+++ b/buildroot/package/freescale-imx/freescale-imx.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FREESCALE_IMX_SITE = http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
+FREESCALE_IMX_SITE = http://www.nxp.com/lgfiles/NMG/MAD/YOCTO
 
 # Helper for self-extracting binaries distributed by Freescale.
 #
diff --git a/buildroot/package/freescale-imx/imx-uuc/imx-uuc.mk b/buildroot/package/freescale-imx/imx-uuc/imx-uuc.mk
index 52d2b7c7a..e94648b83 100644
--- a/buildroot/package/freescale-imx/imx-uuc/imx-uuc.mk
+++ b/buildroot/package/freescale-imx/imx-uuc/imx-uuc.mk
@@ -14,7 +14,7 @@ IMX_UUC_LICENSE_FILES = COPYING
 IMX_UUC_DEPENDENCIES = host-dosfstools
 
 define IMX_UUC_BUILD_CMDS
-	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) CC=$(TARGET_CC)
+	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(TARGET_CONFIGURE_OPTS)
 endef
 
 define IMX_UUC_INSTALL_TARGET_CMDS
diff --git a/buildroot/package/freeswitch/freeswitch.hash b/buildroot/package/freeswitch/freeswitch.hash
index 6f90c2156..1c5de7bcc 100644
--- a/buildroot/package/freeswitch/freeswitch.hash
+++ b/buildroot/package/freeswitch/freeswitch.hash
@@ -1,11 +1,11 @@
-# From http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.5.tar.xz.md5
-md5 e3d750ed0bbf13ce6fe228af9af07bcd freeswitch-1.8.5.tar.xz
-# From http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.5.tar.xz.sha1
-sha1 e9f95b42ed9dd41437a65bddbb5c1f647436e426 freeswitch-1.8.5.tar.xz
-# From http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.5.tar.xz.sha256
-sha256 503a551be5d6df06162ea9d98a952b6fb524852ce2352fe3ca3a36a76995b046 freeswitch-1.8.5.tar.xz
+# From http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.6.tar.xz.md5
+md5 cadec07057786cfb0bb805edc279d752 freeswitch-1.8.6.tar.xz
+# From http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.6.tar.xz.sha1
+sha1 c6eb7de942a61604774ca08ac8070244b7c3167a freeswitch-1.8.6.tar.xz
+# From http://files.freeswitch.org/freeswitch-releases/freeswitch-1.8.6.tar.xz.sha256
+sha256 b87f47e57d13de2b901bd1e4eb85491178e59a159a2831d7430abe7947f0d3a4 freeswitch-1.8.6.tar.xz
 # Locally computed
-sha256 10299420c1e8602c0daf5a59d022621cd72a9148d1f0f33501edb3db3445c7fe  COPYING
+sha256 75c933202f40939cdc3827fce20a1efdaa38291e2b5a65d234eb16e2cffda66a  COPYING
 sha256 e8e26b16da14aa3e6ed5c22c705fdc1f45d6225fca461ea9f7314bcdfdc414c4  libs/apr/LICENSE
 sha256 1eefb2ea1db0af7729a9d8a27d7c65d8a37ab185393f935b029aac6828ce315a  libs/apr-util/LICENSE
 sha256 8267348d5af1262c11d1a08de2f5afc77457755f1ac658627dd9acf71011d615  libs/libvpx/LICENSE
diff --git a/buildroot/package/freeswitch/freeswitch.mk b/buildroot/package/freeswitch/freeswitch.mk
index 0b7544d09..8c0c7fb11 100644
--- a/buildroot/package/freeswitch/freeswitch.mk
+++ b/buildroot/package/freeswitch/freeswitch.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-FREESWITCH_VERSION = 1.8.5
+FREESWITCH_VERSION = 1.8.6
 FREESWITCH_SOURCE = freeswitch-$(FREESWITCH_VERSION).tar.xz
 FREESWITCH_SITE = http://files.freeswitch.org/freeswitch-releases
 # External modules need headers/libs from staging
diff --git a/buildroot/package/fswebcam/Config.in b/buildroot/package/fswebcam/Config.in
index d268454aa..fbd077bc3 100644
--- a/buildroot/package/fswebcam/Config.in
+++ b/buildroot/package/fswebcam/Config.in
@@ -15,7 +15,7 @@ config BR2_PACKAGE_FSWEBCAM
 	  stdio where it can be piped to something like ncftpput or
 	  scp.
 
-	  http://www.firestorm.cx/fswebcam/
+	  https://www.sanslogic.co.uk/fswebcam/
 
 comment "fswebcam needs a toolchain w/ dynamic library"
 	depends on BR2_USE_MMU
diff --git a/buildroot/package/fwts/Config.in b/buildroot/package/fwts/Config.in
index 94ac60636..269f065fd 100644
--- a/buildroot/package/fwts/Config.in
+++ b/buildroot/package/fwts/Config.in
@@ -3,7 +3,7 @@ config BR2_PACKAGE_FWTS
 	depends on BR2_i386 || BR2_x86_64 || BR2_aarch64
 	depends on BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS # libbsd
 	depends on BR2_TOOLCHAIN_HAS_SYNC_4 # json-c
-	depends on BR2_USE_MMU # libglib2, libbsd
+	depends on BR2_USE_MMU # libglib2
 	depends on BR2_USE_WCHAR # libglib2, libbsd
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2, libbsd
 	depends on BR2_TOOLCHAIN_USES_GLIBC # execinfo.h
diff --git a/buildroot/package/gcc/7.4.0/1002-xtensa-backport-fix-for-PR-target-90922.patch b/buildroot/package/gcc/7.4.0/1002-xtensa-backport-fix-for-PR-target-90922.patch
new file mode 100644
index 000000000..38e0309e5
--- /dev/null
+++ b/buildroot/package/gcc/7.4.0/1002-xtensa-backport-fix-for-PR-target-90922.patch
@@ -0,0 +1,43 @@
+From a592242578e573778241cae6d3928c064dcdfda4 Mon Sep 17 00:00:00 2001
+From: jcmvbkbc 
+Date: Tue, 18 Jun 2019 22:19:12 +0000
+Subject: [PATCH] xtensa: fix for PR target/90922
+
+Stack pointer adjustment code in prologue missed a case of no
+callee-saved registers and a stack frame size bigger than 128 bytes.
+Handle that case.
+
+This fixes the following gcc tests with call0 ABI:
+  gcc.c-torture/execute/stdarg-2.c
+  gcc.dg/torture/pr55882.c
+  gcc.dg/torture/pr57569.c
+
+gcc/
+2019-06-18  Max Filippov  
+
+	* config/xtensa/xtensa.c (xtensa_expand_prologue): Add stack
+	pointer adjustment for the case of no callee-saved registers and
+	stack frame bigger than 128 bytes.
+
+Signed-off-by: Max Filippov 
+---
+ gcc/config/xtensa/xtensa.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/gcc/config/xtensa/xtensa.c b/gcc/config/xtensa/xtensa.c
+index 19bd616d67f6..ee5612441e25 100644
+--- a/gcc/config/xtensa/xtensa.c
++++ b/gcc/config/xtensa/xtensa.c
+@@ -2802,7 +2802,8 @@ xtensa_expand_prologue (void)
+ 			    gen_rtx_SET (mem, reg));
+ 	    }
+ 	}
+-      if (total_size > 1024)
++      if (total_size > 1024
++	  || (!callee_save_size && total_size > 128))
+ 	{
+ 	  rtx tmp_reg = gen_rtx_REG (Pmode, A9_REG);
+ 	  emit_move_insn (tmp_reg, GEN_INT (total_size -
+-- 
+2.11.0
+
diff --git a/buildroot/package/gcc/7.4.0/1003-xtensa-fix-PR-target-91880.patch b/buildroot/package/gcc/7.4.0/1003-xtensa-fix-PR-target-91880.patch
new file mode 100644
index 000000000..e75588bf4
--- /dev/null
+++ b/buildroot/package/gcc/7.4.0/1003-xtensa-fix-PR-target-91880.patch
@@ -0,0 +1,49 @@
+From 7c11710230921246156aecc20eb4b6ccaeaaa473 Mon Sep 17 00:00:00 2001
+From: Max Filippov 
+Date: Tue, 24 Sep 2019 04:15:17 -0700
+Subject: [PATCH] xtensa: fix PR target/91880
+
+Xtensa hwloop_optimize segfaults when zero overhead loop is about to be
+inserted as the first instruction of the function.
+Insert zero overhead loop instruction into new basic block before the
+loop when basic block that precedes the loop is empty.
+
+2019-09-26  Max Filippov  
+gcc/
+	* config/xtensa/xtensa.c (hwloop_optimize): Insert zero overhead
+	loop instruction into new basic block before the loop when basic
+	block that precedes the loop is empty.
+
+Signed-off-by: Max Filippov 
+---
+Backported from: r276166
+
+ gcc/config/xtensa/xtensa.c                 |  5 ++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/gcc/config/xtensa/xtensa.c b/gcc/config/xtensa/xtensa.c
+index ee5612441e25..2527468d57db 100644
+--- a/gcc/config/xtensa/xtensa.c
++++ b/gcc/config/xtensa/xtensa.c
+@@ -4174,7 +4174,9 @@ hwloop_optimize (hwloop_info loop)
+ 
+   seq = get_insns ();
+ 
+-  if (!single_succ_p (entry_bb) || vec_safe_length (loop->incoming) > 1)
++  entry_after = BB_END (entry_bb);
++  if (!single_succ_p (entry_bb) || vec_safe_length (loop->incoming) > 1
++      || !entry_after)
+     {
+       basic_block new_bb;
+       edge e;
+@@ -4195,7 +4197,6 @@ hwloop_optimize (hwloop_info loop)
+     }
+   else
+     {
+-      entry_after = BB_END (entry_bb);
+       while (DEBUG_INSN_P (entry_after)
+              || (NOTE_P (entry_after)
+                  && NOTE_KIND (entry_after) != NOTE_INSN_BASIC_BLOCK
+-- 
+2.11.0
+
diff --git a/buildroot/package/gcc/8.3.0/0001-xtensa-backport-fix-for-PR-target-90922.patch b/buildroot/package/gcc/8.3.0/0001-xtensa-backport-fix-for-PR-target-90922.patch
new file mode 100644
index 000000000..c961ce5d2
--- /dev/null
+++ b/buildroot/package/gcc/8.3.0/0001-xtensa-backport-fix-for-PR-target-90922.patch
@@ -0,0 +1,43 @@
+From a592242578e573778241cae6d3928c064dcdfda4 Mon Sep 17 00:00:00 2001
+From: jcmvbkbc 
+Date: Tue, 18 Jun 2019 22:19:12 +0000
+Subject: [PATCH] xtensa: fix for PR target/90922
+
+Stack pointer adjustment code in prologue missed a case of no
+callee-saved registers and a stack frame size bigger than 128 bytes.
+Handle that case.
+
+This fixes the following gcc tests with call0 ABI:
+  gcc.c-torture/execute/stdarg-2.c
+  gcc.dg/torture/pr55882.c
+  gcc.dg/torture/pr57569.c
+
+gcc/
+2019-06-18  Max Filippov  
+
+	* config/xtensa/xtensa.c (xtensa_expand_prologue): Add stack
+	pointer adjustment for the case of no callee-saved registers and
+	stack frame bigger than 128 bytes.
+
+Signed-off-by: Max Filippov 
+---
+ gcc/config/xtensa/xtensa.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/gcc/config/xtensa/xtensa.c b/gcc/config/xtensa/xtensa.c
+index 19bd616d67f6..ee5612441e25 100644
+--- a/gcc/config/xtensa/xtensa.c
++++ b/gcc/config/xtensa/xtensa.c
+@@ -2862,7 +2862,8 @@ xtensa_expand_prologue (void)
+ 			    gen_rtx_SET (mem, reg));
+ 	    }
+ 	}
+-      if (total_size > 1024)
++      if (total_size > 1024
++	  || (!callee_save_size && total_size > 128))
+ 	{
+ 	  rtx tmp_reg = gen_rtx_REG (Pmode, A9_REG);
+ 	  emit_move_insn (tmp_reg, GEN_INT (total_size -
+-- 
+2.11.0
+
diff --git a/buildroot/package/gcc/8.3.0/0002-xtensa-fix-PR-target-91880.patch b/buildroot/package/gcc/8.3.0/0002-xtensa-fix-PR-target-91880.patch
new file mode 100644
index 000000000..e65352501
--- /dev/null
+++ b/buildroot/package/gcc/8.3.0/0002-xtensa-fix-PR-target-91880.patch
@@ -0,0 +1,49 @@
+From 7c11710230921246156aecc20eb4b6ccaeaaa473 Mon Sep 17 00:00:00 2001
+From: Max Filippov 
+Date: Tue, 24 Sep 2019 04:15:17 -0700
+Subject: [PATCH] xtensa: fix PR target/91880
+
+Xtensa hwloop_optimize segfaults when zero overhead loop is about to be
+inserted as the first instruction of the function.
+Insert zero overhead loop instruction into new basic block before the
+loop when basic block that precedes the loop is empty.
+
+2019-09-26  Max Filippov  
+gcc/
+	* config/xtensa/xtensa.c (hwloop_optimize): Insert zero overhead
+	loop instruction into new basic block before the loop when basic
+	block that precedes the loop is empty.
+
+Signed-off-by: Max Filippov 
+---
+Backported from: r276166
+
+ gcc/config/xtensa/xtensa.c                 |  5 ++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/gcc/config/xtensa/xtensa.c b/gcc/config/xtensa/xtensa.c
+index ee5612441e25..2527468d57db 100644
+--- a/gcc/config/xtensa/xtensa.c
++++ b/gcc/config/xtensa/xtensa.c
+@@ -4232,7 +4232,9 @@ hwloop_optimize (hwloop_info loop)
+ 
+   seq = get_insns ();
+ 
+-  if (!single_succ_p (entry_bb) || vec_safe_length (loop->incoming) > 1)
++  entry_after = BB_END (entry_bb);
++  if (!single_succ_p (entry_bb) || vec_safe_length (loop->incoming) > 1
++      || !entry_after)
+     {
+       basic_block new_bb;
+       edge e;
+@@ -4253,7 +4255,6 @@ hwloop_optimize (hwloop_info loop)
+     }
+   else
+     {
+-      entry_after = BB_END (entry_bb);
+       while (DEBUG_INSN_P (entry_after)
+              || (NOTE_P (entry_after)
+ 		 && NOTE_KIND (entry_after) != NOTE_INSN_BASIC_BLOCK))
+-- 
+2.11.0
+
diff --git a/buildroot/package/gd/0001-bmp-check-return-value-in-gdImageBmpPtr.patch b/buildroot/package/gd/0001-bmp-check-return-value-in-gdImageBmpPtr.patch
new file mode 100644
index 000000000..f3c9ea481
--- /dev/null
+++ b/buildroot/package/gd/0001-bmp-check-return-value-in-gdImageBmpPtr.patch
@@ -0,0 +1,80 @@
+From ac16bdf2d41724b5a65255d4c28fb0ec46bc42f5 Mon Sep 17 00:00:00 2001
+From: Mike Frysinger 
+Date: Sat, 14 Jul 2018 13:54:08 -0400
+Subject: [PATCH] bmp: check return value in gdImageBmpPtr
+
+Closes #447.
+
+CVE-2018-1000222
+
+Signed-off-by: Peter Korsgaard 
+---
+ src/gd_bmp.c | 17 ++++++++++++++---
+ 1 file changed, 14 insertions(+), 3 deletions(-)
+
+diff --git a/src/gd_bmp.c b/src/gd_bmp.c
+index bde0b9d..78f40d9 100644
+--- a/src/gd_bmp.c
++++ b/src/gd_bmp.c
+@@ -47,6 +47,8 @@ static int bmp_read_4bit(gdImagePtr im, gdIOCtxPtr infile, bmp_info_t *info, bmp
+ static int bmp_read_8bit(gdImagePtr im, gdIOCtxPtr infile, bmp_info_t *info, bmp_hdr_t *header);
+ static int bmp_read_rle(gdImagePtr im, gdIOCtxPtr infile, bmp_info_t *info);
+ 
++static int _gdImageBmpCtx(gdImagePtr im, gdIOCtxPtr out, int compression);
++
+ #define BMP_DEBUG(s)
+ 
+ static int gdBMPPutWord(gdIOCtx *out, int w)
+@@ -87,8 +89,10 @@ BGD_DECLARE(void *) gdImageBmpPtr(gdImagePtr im, int *size, int compression)
+ 	void *rv;
+ 	gdIOCtx *out = gdNewDynamicCtx(2048, NULL);
+ 	if (out == NULL) return NULL;
+-	gdImageBmpCtx(im, out, compression);
+-	rv = gdDPExtractData(out, size);
++	if (!_gdImageBmpCtx(im, out, compression))
++		rv = gdDPExtractData(out, size);
++	else
++		rv = NULL;
+ 	out->gd_free(out);
+ 	return rv;
+ }
+@@ -141,6 +145,11 @@ BGD_DECLARE(void) gdImageBmp(gdImagePtr im, FILE *outFile, int compression)
+ 		compression - whether to apply RLE or not.
+ */
+ BGD_DECLARE(void) gdImageBmpCtx(gdImagePtr im, gdIOCtxPtr out, int compression)
++{
++	_gdImageBmpCtx(im, out, compression);
++}
++
++static int _gdImageBmpCtx(gdImagePtr im, gdIOCtxPtr out, int compression)
+ {
+ 	int bitmap_size = 0, info_size, total_size, padding;
+ 	int i, row, xpos, pixel;
+@@ -148,6 +157,7 @@ BGD_DECLARE(void) gdImageBmpCtx(gdImagePtr im, gdIOCtxPtr out, int compression)
+ 	unsigned char *uncompressed_row = NULL, *uncompressed_row_start = NULL;
+ 	FILE *tmpfile_for_compression = NULL;
+ 	gdIOCtxPtr out_original = NULL;
++	int ret = 1;
+ 
+ 	/* No compression if its true colour or we don't support seek */
+ 	if (im->trueColor) {
+@@ -325,6 +335,7 @@ BGD_DECLARE(void) gdImageBmpCtx(gdImagePtr im, gdIOCtxPtr out, int compression)
+ 		out_original = NULL;
+ 	}
+ 
++	ret = 0;
+ cleanup:
+ 	if (tmpfile_for_compression) {
+ #ifdef _WIN32
+@@ -338,7 +349,7 @@ cleanup:
+ 	if (out_original) {
+ 		out_original->gd_free(out_original);
+ 	}
+-	return;
++	return ret;
+ }
+ 
+ static int compress_row(unsigned char *row, int length)
+-- 
+2.20.1
+
diff --git a/buildroot/package/gd/0002-Fix-420-Potential-infinite-loop-in-gdImageCreateFrom.patch b/buildroot/package/gd/0002-Fix-420-Potential-infinite-loop-in-gdImageCreateFrom.patch
new file mode 100644
index 000000000..8d77f0ee1
--- /dev/null
+++ b/buildroot/package/gd/0002-Fix-420-Potential-infinite-loop-in-gdImageCreateFrom.patch
@@ -0,0 +1,61 @@
+From a11f47475e6443b7f32d21f2271f28f417e2ac04 Mon Sep 17 00:00:00 2001
+From: "Christoph M. Becker" 
+Date: Wed, 29 Nov 2017 19:37:38 +0100
+Subject: [PATCH] Fix #420: Potential infinite loop in gdImageCreateFromGifCtx
+
+Due to a signedness confusion in `GetCode_` a corrupt GIF file can
+trigger an infinite loop.  Furthermore we make sure that a GIF without
+any palette entries is treated as invalid *after* open palette entries
+have been removed.
+
+CVE-2018-5711
+
+See also https://bugs.php.net/bug.php?id=75571.
+
+[Peter: drop tests]
+Signed-off-by: Peter Korsgaard 
+---
+ src/gd_gif_in.c             |  12 ++++++------
+ 1 files changed, 38 insertions(+), 6 deletions(-)
+
+diff --git a/src/gd_gif_in.c b/src/gd_gif_in.c
+index daf26e7..0a8bd71 100644
+--- a/src/gd_gif_in.c
++++ b/src/gd_gif_in.c
+@@ -335,11 +335,6 @@ terminated:
+ 		return 0;
+ 	}
+ 
+-	if(!im->colorsTotal) {
+-		gdImageDestroy(im);
+-		return 0;
+-	}
+-
+ 	/* Check for open colors at the end, so
+ 	 * we can reduce colorsTotal and ultimately
+ 	 * BitsPerPixel */
+@@ -351,6 +346,11 @@ terminated:
+ 		}
+ 	}
+ 
++	if(!im->colorsTotal) {
++		gdImageDestroy(im);
++		return 0;
++	}
++
+ 	return im;
+ }
+ 
+@@ -447,7 +447,7 @@ static int
+ GetCode_(gdIOCtx *fd, CODE_STATIC_DATA *scd, int code_size, int flag, int *ZeroDataBlockP)
+ {
+ 	int i, j, ret;
+-	unsigned char count;
++	int count;
+ 
+ 	if(flag) {
+ 		scd->curbit = 0;
+
+-- 
+2.20.1
+
diff --git a/buildroot/package/gd/0003-Fix-501-Uninitialized-read-in-gdImageCreateFromXbm-C.patch b/buildroot/package/gd/0003-Fix-501-Uninitialized-read-in-gdImageCreateFromXbm-C.patch
new file mode 100644
index 000000000..57df1a2fb
--- /dev/null
+++ b/buildroot/package/gd/0003-Fix-501-Uninitialized-read-in-gdImageCreateFromXbm-C.patch
@@ -0,0 +1,41 @@
+From e13a342c079aeb73e31dfa19eaca119761bac3f3 Mon Sep 17 00:00:00 2001
+From: Jonas Meurer 
+Date: Tue, 11 Jun 2019 12:16:46 +0200
+Subject: [PATCH] Fix #501: Uninitialized read in gdImageCreateFromXbm
+ (CVE-2019-11038)
+
+Bug-Debian-Security: https://security-tracker.debian.org/tracker/CVE-2019-11038
+Bug-Debian: https://bugs.debian.org/929821
+Bug: https://github.com/libgd/libgd/issues/501
+
+We have to ensure that `sscanf()` does indeed read a hex value here,
+and bail out otherwise.
+
+Original patch by Christoph M. Becker  for PHP libgd ext.
+https://git.php.net/?p=php-src.git;a=commit;h=ed6dee9a198c904ad5e03113e58a2d2c200f5184
+
+Signed-off-by: Peter Korsgaard 
+---
+ src/gd_xbm.c | 6 +++++-
+ 1 file changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/src/gd_xbm.c b/src/gd_xbm.c
+index 4ca41ac..cf0545e 100644
+--- a/src/gd_xbm.c
++++ b/src/gd_xbm.c
+@@ -169,7 +169,11 @@ BGD_DECLARE(gdImagePtr) gdImageCreateFromXbm(FILE * fd)
+ 			}
+ 			h[3] = ch;
+ 		}
+-		sscanf(h, "%x", &b);
++		if (sscanf(h, "%x", &b) != 1) {
++			gd_error("invalid XBM");
++			gdImageDestroy(im);
++			return 0;
++		}
+ 		for (bit = 1; bit <= max_bit; bit = bit << 1) {
+ 			gdImageSetPixel(im, x++, y, (b & bit) ? 1 : 0);
+ 			if (x == im->sx) {
+-- 
+2.20.1
+
diff --git a/buildroot/package/gd/0004-Fix-492-Potential-double-free-in-gdImage-Ptr.patch b/buildroot/package/gd/0004-Fix-492-Potential-double-free-in-gdImage-Ptr.patch
new file mode 100644
index 000000000..e51428a64
--- /dev/null
+++ b/buildroot/package/gd/0004-Fix-492-Potential-double-free-in-gdImage-Ptr.patch
@@ -0,0 +1,219 @@
+From 553702980ae89c83f2d6e254d62cf82e204956d0 Mon Sep 17 00:00:00 2001
+From: "Christoph M. Becker" 
+Date: Thu, 17 Jan 2019 11:54:55 +0100
+Subject: [PATCH] Fix #492: Potential double-free in gdImage*Ptr()
+
+Whenever `gdImage*Ptr()` calls `gdImage*Ctx()` and the latter fails, we
+must not call `gdDPExtractData()`; otherwise a double-free would
+happen.  Since `gdImage*Ctx()` are void functions, and we can't change
+that for BC reasons, we're introducing static helpers which are used
+internally.
+
+We're adding a regression test for `gdImageJpegPtr()`, but not for
+`gdImageGifPtr()` and `gdImageWbmpPtr()` since we don't know how to
+trigger failure of the respective `gdImage*Ctx()` calls.
+
+This potential security issue has been reported by Solmaz Salimi (aka.
+Rooney).
+
+CVE-2019-6978
+
+[Peter: drop tests]
+Signed-off-by: Peter Korsgaard 
+---
+ src/gd_gif_out.c                  | 18 +++++++++++++++---
+ src/gd_jpeg.c                     | 20 ++++++++++++++++----
+ src/gd_wbmp.c                     | 21 ++++++++++++++++++---
+ 3 files changed, 84 insertions(+), 11 deletions(-)
+
+diff --git a/src/gd_gif_out.c b/src/gd_gif_out.c
+index 298a581..d5a9534 100644
+--- a/src/gd_gif_out.c
++++ b/src/gd_gif_out.c
+@@ -99,6 +99,7 @@ static void char_init(GifCtx *ctx);
+ static void char_out(int c, GifCtx *ctx);
+ static void flush_char(GifCtx *ctx);
+ 
++static int _gdImageGifCtx(gdImagePtr im, gdIOCtxPtr out);
+ 
+ 
+ 
+@@ -131,8 +132,11 @@ BGD_DECLARE(void *) gdImageGifPtr(gdImagePtr im, int *size)
+ 	void *rv;
+ 	gdIOCtx *out = gdNewDynamicCtx(2048, NULL);
+ 	if (out == NULL) return NULL;
+-	gdImageGifCtx(im, out);
+-	rv = gdDPExtractData(out, size);
++	if (!_gdImageGifCtx(im, out)) {
++		rv = gdDPExtractData(out, size);
++	} else {
++		rv = NULL;
++	}
+ 	out->gd_free(out);
+ 	return rv;
+ }
+@@ -220,6 +224,12 @@ BGD_DECLARE(void) gdImageGif(gdImagePtr im, FILE *outFile)
+ 
+ */
+ BGD_DECLARE(void) gdImageGifCtx(gdImagePtr im, gdIOCtxPtr out)
++{
++	_gdImageGifCtx(im, out);
++}
++
++/* returns 0 on success, 1 on failure */
++static int _gdImageGifCtx(gdImagePtr im, gdIOCtxPtr out)
+ {
+ 	gdImagePtr pim = 0, tim = im;
+ 	int interlace, BitsPerPixel;
+@@ -231,7 +241,7 @@ BGD_DECLARE(void) gdImageGifCtx(gdImagePtr im, gdIOCtxPtr out)
+ 		based temporary image. */
+ 		pim = gdImageCreatePaletteFromTrueColor(im, 1, 256);
+ 		if(!pim) {
+-			return;
++			return 1;
+ 		}
+ 		tim = pim;
+ 	}
+@@ -247,6 +257,8 @@ BGD_DECLARE(void) gdImageGifCtx(gdImagePtr im, gdIOCtxPtr out)
+ 		/* Destroy palette based temporary image. */
+ 		gdImageDestroy(	pim);
+ 	}
++
++	return 0;
+ }
+ 
+ 
+diff --git a/src/gd_jpeg.c b/src/gd_jpeg.c
+index fc05842..96ef430 100644
+--- a/src/gd_jpeg.c
++++ b/src/gd_jpeg.c
+@@ -117,6 +117,8 @@ static void fatal_jpeg_error(j_common_ptr cinfo)
+ 	exit(99);
+ }
+ 
++static int _gdImageJpegCtx(gdImagePtr im, gdIOCtx *outfile, int quality);
++
+ /*
+  * Write IM to OUTFILE as a JFIF-formatted JPEG image, using quality
+  * QUALITY.  If QUALITY is in the range 0-100, increasing values
+@@ -231,8 +233,11 @@ BGD_DECLARE(void *) gdImageJpegPtr(gdImagePtr im, int *size, int quality)
+ 	void *rv;
+ 	gdIOCtx *out = gdNewDynamicCtx(2048, NULL);
+ 	if (out == NULL) return NULL;
+-	gdImageJpegCtx(im, out, quality);
+-	rv = gdDPExtractData(out, size);
++	if (!_gdImageJpegCtx(im, out, quality)) {
++		rv = gdDPExtractData(out, size);
++	} else {
++		rv = NULL;
++	}
+ 	out->gd_free(out);
+ 	return rv;
+ }
+@@ -253,6 +258,12 @@ void jpeg_gdIOCtx_dest(j_compress_ptr cinfo, gdIOCtx *outfile);
+ 
+ */
+ BGD_DECLARE(void) gdImageJpegCtx(gdImagePtr im, gdIOCtx *outfile, int quality)
++{
++	_gdImageJpegCtx(im, outfile, quality);
++}
++
++/* returns 0 on success, 1 on failure */
++static int _gdImageJpegCtx(gdImagePtr im, gdIOCtx *outfile, int quality)
+ {
+ 	struct jpeg_compress_struct cinfo;
+ 	struct jpeg_error_mgr jerr;
+@@ -287,7 +298,7 @@ BGD_DECLARE(void) gdImageJpegCtx(gdImagePtr im, gdIOCtx *outfile, int quality)
+ 		if(row) {
+ 			gdFree(row);
+ 		}
+-		return;
++		return 1;
+ 	}
+ 
+ 	cinfo.err->emit_message = jpeg_emit_message;
+@@ -328,7 +339,7 @@ BGD_DECLARE(void) gdImageJpegCtx(gdImagePtr im, gdIOCtx *outfile, int quality)
+ 	if(row == 0) {
+ 		gd_error("gd-jpeg: error: unable to allocate JPEG row structure: gdCalloc returns NULL\n");
+ 		jpeg_destroy_compress(&cinfo);
+-		return;
++		return 1;
+ 	}
+ 
+ 	rowptr[0] = row;
+@@ -405,6 +416,7 @@ BGD_DECLARE(void) gdImageJpegCtx(gdImagePtr im, gdIOCtx *outfile, int quality)
+ 	jpeg_finish_compress(&cinfo);
+ 	jpeg_destroy_compress(&cinfo);
+ 	gdFree(row);
++	return 0;
+ }
+ 
+ 
+diff --git a/src/gd_wbmp.c b/src/gd_wbmp.c
+index f19a1c9..a49bdbe 100644
+--- a/src/gd_wbmp.c
++++ b/src/gd_wbmp.c
+@@ -88,6 +88,8 @@ int gd_getin(void *in)
+ 	return (gdGetC((gdIOCtx *)in));
+ }
+ 
++static int _gdImageWBMPCtx(gdImagePtr image, int fg, gdIOCtx *out);
++
+ /*
+ 	Function: gdImageWBMPCtx
+ 
+@@ -100,6 +102,12 @@ int gd_getin(void *in)
+ 		out   - the stream where to write
+ */
+ BGD_DECLARE(void) gdImageWBMPCtx(gdImagePtr image, int fg, gdIOCtx *out)
++{
++	_gdImageWBMPCtx(image, fg, out);
++}
++
++/* returns 0 on success, 1 on failure */
++static int _gdImageWBMPCtx(gdImagePtr image, int fg, gdIOCtx *out)
+ {
+ 	int x, y, pos;
+ 	Wbmp *wbmp;
+@@ -107,7 +115,7 @@ BGD_DECLARE(void) gdImageWBMPCtx(gdImagePtr image, int fg, gdIOCtx *out)
+ 	/* create the WBMP */
+ 	if((wbmp = createwbmp(gdImageSX(image), gdImageSY(image), WBMP_WHITE)) == NULL) {
+ 		gd_error("Could not create WBMP\n");
+-		return;
++		return 1;
+ 	}
+ 
+ 	/* fill up the WBMP structure */
+@@ -123,11 +131,15 @@ BGD_DECLARE(void) gdImageWBMPCtx(gdImagePtr image, int fg, gdIOCtx *out)
+ 
+ 	/* write the WBMP to a gd file descriptor */
+ 	if(writewbmp(wbmp, &gd_putout, out)) {
++		freewbmp(wbmp);
+ 		gd_error("Could not save WBMP\n");
++		return 1;
+ 	}
+ 
+ 	/* des submitted this bugfix: gdFree the memory. */
+ 	freewbmp(wbmp);
++
++	return 0;
+ }
+ 
+ /*
+@@ -271,8 +283,11 @@ BGD_DECLARE(void *) gdImageWBMPPtr(gdImagePtr im, int *size, int fg)
+ 	void *rv;
+ 	gdIOCtx *out = gdNewDynamicCtx(2048, NULL);
+ 	if (out == NULL) return NULL;
+-	gdImageWBMPCtx(im, fg, out);
+-	rv = gdDPExtractData(out, size);
++	if (!_gdImageWBMPCtx(im, fg, out)) {
++		rv = gdDPExtractData(out, size);
++	} else {
++		rv = NULL;
++	}
+ 	out->gd_free(out);
+ 	return rv;
+ }
+-- 
+2.20.1
+
diff --git a/buildroot/package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch b/buildroot/package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch
new file mode 100644
index 000000000..d5cc908e2
--- /dev/null
+++ b/buildroot/package/gerbera/0002-Fix-find_program-taglib-config-when-cross-compiling.patch
@@ -0,0 +1,46 @@
+From 0f78b883f02651bd15a96a7294e01f94b28c20f8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?J=C3=B6rg=20Krause?= 
+Date: Mon, 13 May 2019 13:42:14 +0200
+Subject: [PATCH] Fix find_program taglib-config when cross-compiling
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When cross-compiling Gerbera CMakes `find_program()` will search for
+binaries on the host. This is typically correct, e.g. when search for
+compilers or shells.
+
+When cross-compiling searching for `taglib-config` should not find the
+binary on the host, instead it should find the binary in the sysroot
+directory, as the host `taglib-config` will output the wrong host paths
+and libs, whereas the sysroot `taglib-config` will output the correct sysroot
+paths and libs.
+
+Therefore, use the `CMAKE_FIND_ROOT_PATH_MODE_PROGRAM` variable when
+cross-compiling. This variable controls whether the `CMAKE_FIND_ROOT_PATH`
+and `CMAKE_SYSROOT` are used by find_program().
+
+Backported from: 0f78b883f02651bd15a96a7294e01f94b28c20f8
+
+Signed-off-by: Jörg Krause 
+---
+ cmake/FindTaglib.cmake | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/cmake/FindTaglib.cmake b/cmake/FindTaglib.cmake
+index 46a20ff2..7135d766 100644
+--- a/cmake/FindTaglib.cmake
++++ b/cmake/FindTaglib.cmake
+@@ -19,6 +19,9 @@ ELSE()
+ 	endif(NOT TAGLIB_MIN_VERSION)
+ 
+ 	if(NOT WIN32)
++            if (CMAKE_CROSSCOMPILING)
++              set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM ONLY)
++            endif(CMAKE_CROSSCOMPILING)
+             find_program(TAGLIBCONFIG_EXECUTABLE NAMES taglib-config PATHS
+ 		   ${BIN_INSTALL_DIR}
+             )
+-- 
+2.22.0
+
diff --git a/buildroot/package/ghostscript/0002-Bug-700986-Remove-the-crazy-md5-file-copying-nonsense.patch b/buildroot/package/ghostscript/0002-Bug-700986-Remove-the-crazy-md5-file-copying-nonsense.patch
deleted file mode 100644
index 49bcfcdd3..000000000
--- a/buildroot/package/ghostscript/0002-Bug-700986-Remove-the-crazy-md5-file-copying-nonsense.patch
+++ /dev/null
@@ -1,252 +0,0 @@
-From d86210973df93ccca0befd56afba2132da925ebc Mon Sep 17 00:00:00 2001
-From: Chris Liddell 
-Date: Thu, 18 Apr 2019 16:58:41 +0100
-Subject: [PATCH] Bug 700986: Remove the crazy md5 file copying nonsense
-
-To preserve building as a standalone test exe, we avoided using Ghostscript
-includes in the md5 source and header files, but dynamically add them to
-copies of the files during the build. Since we no longer need/care for the
-stand alone exe, remove the build complication, and just include the header
-file normally.
-
-Signed-off-by: Fabrice Fontaine 
-[Retrieved from:
-http://git.ghostscript.com/?p=user/chrisl/ghostpdl.git;a=commitdiff;h=d86210973df9]
----
- base/gsmd5.h                   |   2 +
- base/lib.mak                   |  10 +--
- base/md5main.c                 | 141 -----------------------------------------
- doc/Develop.htm                |   1 -
- windows/ghostscript.vcproj     |   4 --
- windows/ghostscript_rt.vcxproj |   1 -
- 6 files changed, 5 insertions(+), 154 deletions(-)
- delete mode 100644 base/md5main.c
-
-diff --git a/base/gsmd5.h b/base/gsmd5.h
-index 206ea6b..b159afb 100644
---- a/base/gsmd5.h
-+++ b/base/gsmd5.h
-@@ -50,6 +50,8 @@
- #ifndef md5_INCLUDED
- #  define md5_INCLUDED
- 
-+#include "memory_.h"
-+
- /*
-  * This package supports both compile-time and run-time determination of CPU
-  * byte order.  If ARCH_IS_BIG_ENDIAN is defined as 0, the code will be
-diff --git a/base/lib.mak b/base/lib.mak
-index 3ed088a..21e2cb7 100644
---- a/base/lib.mak
-+++ b/base/lib.mak
-@@ -387,13 +387,8 @@ gsmd5_h=$(GLSRC)gsmd5.h
- # We have to use a slightly different compilation approach in order to
- # get std.h included when compiling md5.c.
- md5_=$(GLOBJ)gsmd5.$(OBJ)
--$(GLOBJ)gsmd5.$(OBJ) : $(GLSRC)gsmd5.c $(AK) $(gsmd5_h)\
-- $(EXP)$(ECHOGS_XE) $(LIB_MAK) $(MAKEDIRS)
--	$(EXP)$(ECHOGS_XE) -w $(GLGEN)gsmd5.h -x 23 include -x 2022 memory_.h -x 22
--	$(EXP)$(ECHOGS_XE) -a $(GLGEN)gsmd5.h -+R $(GLSRC)gsmd5.h
--	$(CP_) $(GLSRC)gsmd5.c $(GLGEN)gsmd5.c
--	$(GLCC) $(GLO_)gsmd5.$(OBJ) $(C_) $(GLGEN)gsmd5.c
--	$(RM_) $(GLGEN)gsmd5.c $(GLGEN)gsmd5.h
-+$(GLOBJ)gsmd5.$(OBJ) : $(GLSRC)gsmd5.c $(AK) $(gsmd5_h) $(LIB_MAK) $(MAKEDIRS)
-+	$(GLCC) $(GLO_)gsmd5.$(OBJ) $(C_) $(GLSRC)gsmd5.c
- 
- # SHA-256 digest
- sha2_h=$(GLSRC)sha2.h
-@@ -12346,3 +12341,4 @@ $(GLSRC)gxshade4.h:$(GLSRC)gstypes.h
- $(GLSRC)gxshade4.h:$(GLSRC)stdpre.h
- $(GLSRC)gxshade4.h:$(GLGEN)arch.h
- $(GLSRC)gxshade4.h:$(GLSRC)gs_dll_call.h
-+$(GLSRC)gsmd5.h:$(GLSRC)memory_.h
-diff --git a/base/md5main.c b/base/md5main.c
-deleted file mode 100644
-index 75c523b..0000000
---- a/base/md5main.c
-+++ /dev/null
-@@ -1,141 +0,0 @@
--/*
--  Copyright (C) 2002-2018 Artifex Software, Inc.
--  All rights reserved.
--
--  This software is provided 'as-is', without any express or implied
--  warranty.  In no event will the authors be held liable for any damages
--  arising from the use of this software.
--
--  Permission is granted to anyone to use this software for any purpose,
--  including commercial applications, and to alter it and redistribute it
--  freely, subject to the following restrictions:
--
--  1. The origin of this software must not be misrepresented; you must not
--     claim that you wrote the original software. If you use this software
--     in a product, an acknowledgment in the product documentation would be
--     appreciated but is not required.
--  2. Altered source versions must be plainly marked as such, and must not be
--     misrepresented as being the original software.
--  3. This notice may not be removed or altered from any source distribution.
--
--  L. Peter Deutsch
--  ghost@aladdin.com
--
-- */
--/*
--  Independent implementation of MD5 (RFC 1321).
--
--  This code implements the MD5 Algorithm defined in RFC 1321, whose
--  text is available at
--        http://www.ietf.org/rfc/rfc1321.txt
--  The code is derived from the text of the RFC, including the test suite
--  (section A.5) but excluding the rest of Appendix A.  It does not include
--  any code or documentation that is identified in the RFC as being
--  copyrighted.
--
--  The original and principal author of md5.c is L. Peter Deutsch
--  .  Other authors are noted in the change history
--  that follows (in reverse chronological order):
--
--  2007-06-08 RG  Namespaced the api calls to avoid conflict with other
--        implementations when linking gs as a library.
--  2002-04-13 lpd Splits off main program into a separate file, md5main.c.
-- */
--
--#include "gsmd5.h"
--#include 
--#include 
--#include 
--
--/*
-- * This file builds an executable that performs various functions related
-- * to the MD5 library.  Typical compilation:
-- *	gcc -o md5main -lm md5main.c md5.c
-- */
--static const char *const usage = "\
--Usage:\n\
--    md5main --test		# run the self-test (A.5 of RFC 1321)\n\
--    md5main --t-values		# print the T values for the library\n\
--    md5main --version		# print the version of the package\n\
--";
--static const char *const version = "2002-04-13";
--
--/* Run the self-test. */
--static int
--do_test(void)
--{
--    static const char *const test[7*2] = {
--        "", "d41d8cd98f00b204e9800998ecf8427e",
--        "a", "0cc175b9c0f1b6a831c399e269772661",
--        "abc", "900150983cd24fb0d6963f7d28e17f72",
--        "message digest", "f96b697d7cb7938d525a2f31aaf161d0",
--        "abcdefghijklmnopqrstuvwxyz", "c3fcd3d76192e4007dfb496cca67e13b",
--        "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
--                                "d174ab98d277d9f5a5611c2c9f419d9f",
--        "12345678901234567890123456789012345678901234567890123456789012345678901234567890", "57edf4a22be3c955ac49da2e2107b67a"
--    };
--    int i;
--    int status = 0;
--
--    for (i = 0; i < 7*2; i += 2) {
--        gs_md5_state_t state;
--        gs_md5_byte_t digest[16];
--        char hex_output[16*2 + 1];
--        int di;
--
--        gs_md5_init(&state);
--        gs_md5_append(&state, (const gs_md5_byte_t *)test[i], strlen(test[i]));
--        gs_md5_finish(&state, digest);
--        for (di = 0; di < 16; ++di)
--            gs_sprintf(hex_output + di * 2, "%02x", digest[di]);
--        if (strcmp(hex_output, test[i + 1])) {
--            printf("MD5 (\"%s\") = ", test[i]);
--            puts(hex_output);
--            printf("**** ERROR, should be: %s\n", test[i + 1]);
--            status = 1;
--        }
--    }
--    if (status == 0)
--        puts("md5 self-test completed successfully.");
--    return status;
--}
--
--/* Print the T values. */
--static int
--do_t_values(void)
--{
--    int i;
--    for (i = 1; i <= 64; ++i) {
--        unsigned long v = (unsigned long)(4294967296.0 * fabs(sin((double)i)));
--
--        /*
--         * The following nonsense is only to avoid compiler warnings about
--         * "integer constant is unsigned in ANSI C, signed with -traditional".
--         */
--        if (v >> 31) {
--            printf("#define T%d /* 0x%08lx */ (T_MASK ^ 0x%08lx)\n", i,
--                   v, (unsigned long)(unsigned int)(~v));
--        } else {
--            printf("#define T%d    0x%08lx\n", i, v);
--        }
--    }
--    return 0;
--}
--
--/* Main program */
--int
--main(int argc, char *argv[])
--{
--    if (argc == 2) {
--        if (!strcmp(argv[1], "--test"))
--            return do_test();
--        if (!strcmp(argv[1], "--t-values"))
--            return do_t_values();
--        if (!strcmp(argv[1], "--version")) {
--            puts(version);
--            return 0;
--        }
--    }
--    puts(usage);
--    return 0;
--}
-diff --git a/doc/Develop.htm b/doc/Develop.htm
-index c1ffceb..1ed3030 100644
---- a/doc/Develop.htm
-+++ b/doc/Develop.htm
-@@ -684,7 +684,6 @@ Other:
- base/gx.h,
- base/gsmd5.c,
- base/gsmd5.h,
--base/md5main.c,
- base/aes.c,
- base/aes.h.
- 
-diff --git a/windows/ghostscript.vcproj b/windows/ghostscript.vcproj
-index d607949..fdbeaa1 100644
---- a/windows/ghostscript.vcproj
-+++ b/windows/ghostscript.vcproj
-@@ -2510,10 +2510,6 @@
- 				>
- 			
- 			
--			
--			
- 			
-diff --git a/windows/ghostscript_rt.vcxproj b/windows/ghostscript_rt.vcxproj
-index 589b2d1..fca736b 100644
---- a/windows/ghostscript_rt.vcxproj
-+++ b/windows/ghostscript_rt.vcxproj
-@@ -597,7 +597,6 @@
-     
-     
-     
--    
-     
-     
-     
--- 
-2.9.1
-
-
diff --git a/buildroot/package/ghostscript/ghostscript.hash b/buildroot/package/ghostscript/ghostscript.hash
index 383a414da..51b3a2a09 100644
--- a/buildroot/package/ghostscript/ghostscript.hash
+++ b/buildroot/package/ghostscript/ghostscript.hash
@@ -1,5 +1,5 @@
-# From https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs927/SHA512SUMS
-sha512 5e67ad45a80f01c6ef0eabb1c76dfa8fb6e7f0fde8d82fd5daaf12f370c288a672f8fa69c74d9e30255582267e9a906e4e8b13655f8d993fefdfc8dbdb5d5401  ghostscript-9.27.tar.xz
+# From https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs950/SHA512SUMS
+sha512 3c1e5db519a427f4b6bfb8d93f3c3dfb67d5ec9ccd19c7afa7670deb768515f3fc617c5588e54934bbfbedfdf8609ce2ffa36dd7da3cb618937fe034f64f43ee  ghostscript-9.50.tar.xz
 
 # Hash for license file:
 sha256 6f852249f975287b3efd43a5883875e47fa9f3125e2f1b18b5c09517ac30ecf2  LICENSE
diff --git a/buildroot/package/ghostscript/ghostscript.mk b/buildroot/package/ghostscript/ghostscript.mk
index fefac2aee..a6e85d989 100644
--- a/buildroot/package/ghostscript/ghostscript.mk
+++ b/buildroot/package/ghostscript/ghostscript.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GHOSTSCRIPT_VERSION = 9.27
+GHOSTSCRIPT_VERSION = 9.50
 GHOSTSCRIPT_SITE = https://github.com/ArtifexSoftware/ghostpdl-downloads/releases/download/gs$(subst .,,$(GHOSTSCRIPT_VERSION))
 GHOSTSCRIPT_SOURCE = ghostscript-$(GHOSTSCRIPT_VERSION).tar.xz
 GHOSTSCRIPT_LICENSE = AGPL-3.0
diff --git a/buildroot/package/giflib/0001-Address-SF-bug-113-Heap-Buffer-Overflow-2-in-functio.patch b/buildroot/package/giflib/0001-Address-SF-bug-113-Heap-Buffer-Overflow-2-in-functio.patch
new file mode 100644
index 000000000..9c6f344be
--- /dev/null
+++ b/buildroot/package/giflib/0001-Address-SF-bug-113-Heap-Buffer-Overflow-2-in-functio.patch
@@ -0,0 +1,31 @@
+From 08438a5098f3bb1de23a29334af55eba663f75bd Mon Sep 17 00:00:00 2001
+From: "Eric S. Raymond" 
+Date: Sat, 9 Feb 2019 10:52:21 -0500
+Subject: [PATCH] Address SF bug #113: Heap Buffer Overflow-2 in function
+ DGifDecompressLine()...
+
+This was CVE-2018-11490
+
+[Retrieved from:
+https://sourceforge.net/p/giflib/code/ci/08438a5098f3bb1de23a29334af55eba663f75bd]
+Signed-off-by: Fabrice Fontaine 
+---
+ lib/dgif_lib.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/lib/dgif_lib.c b/lib/dgif_lib.c
+index 15c1460..c4aee5f 100644
+--- a/lib/dgif_lib.c
++++ b/lib/dgif_lib.c
+@@ -930,7 +930,7 @@ DGifDecompressLine(GifFileType *GifFile, GifPixelType *Line, int LineLen)
+                 while (StackPtr != 0 && i < LineLen)
+                     Line[i++] = Stack[--StackPtr];
+             }
+-            if (LastCode != NO_SUCH_CODE && Prefix[Private->RunningCode - 2] == NO_SUCH_CODE) {
++            if (LastCode != NO_SUCH_CODE && Private->RunningCode - 2 < LZ_MAX_CODE && Prefix[Private->RunningCode - 2] == NO_SUCH_CODE) {
+                 Prefix[Private->RunningCode - 2] = LastCode;
+ 
+                 if (CrntCode == Private->RunningCode - 2) {
+-- 
+2.20.1
+
diff --git a/buildroot/package/giflib/0002-Address-SF-bug-119-MemorySanitizer-FPE-on-unknown-ad.patch b/buildroot/package/giflib/0002-Address-SF-bug-119-MemorySanitizer-FPE-on-unknown-ad.patch
new file mode 100644
index 000000000..60e9a324a
--- /dev/null
+++ b/buildroot/package/giflib/0002-Address-SF-bug-119-MemorySanitizer-FPE-on-unknown-ad.patch
@@ -0,0 +1,28 @@
+From 799eb6a3af8a3dd81e2429bf11a72a57e541f908 Mon Sep 17 00:00:00 2001
+From: "Eric S. Raymond" 
+Date: Sun, 17 Mar 2019 12:37:21 -0400
+Subject: [PATCH] Address SF bug #119: MemorySanitizer: FPE on unknown address
+
+[Retrieved (and backported) from:
+https://sourceforge.net/p/giflib/code/ci/08438a5098f3bb1de23a29334af55eba663f75bd]
+Signed-off-by: Fabrice Fontaine 
+---
+ dgif_lib.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/lib/dgif_lib.c b/lib/dgif_lib.c
+index 3a52467..179bd84 100644
+--- a/lib/dgif_lib.c
++++ b/lib/dgif_lib.c
+@@ -1143,7 +1143,7 @@ DGifSlurp(GifFileType *GifFile)
+ 
+               sp = &GifFile->SavedImages[GifFile->ImageCount - 1];
+               /* Allocate memory for the image */
+-              if (sp->ImageDesc.Width < 0 && sp->ImageDesc.Height < 0 &&
++              if (sp->ImageDesc.Width <= 0 || sp->ImageDesc.Height <= 0 ||
+                       sp->ImageDesc.Width > (INT_MAX / sp->ImageDesc.Height)) {
+                   return GIF_ERROR;
+               }
+-- 
+2.20.1
+
diff --git a/buildroot/package/giflib/giflib.hash b/buildroot/package/giflib/giflib.hash
index cdd7bbdec..189dca9f1 100644
--- a/buildroot/package/giflib/giflib.hash
+++ b/buildroot/package/giflib/giflib.hash
@@ -1,3 +1,5 @@
 # From http://sourceforge.net/projects/giflib/files
 md5	2c171ced93c0e83bb09e6ccad8e3ba2b	giflib-5.1.4.tar.bz2
 sha1	5f1157cfc377916280849e247b8e34fa0446513f	giflib-5.1.4.tar.bz2
+# Locally computed
+sha256	0c9b7990ecdca88b676db232c226548ac408b279f550d424d996f0d83591dd8e	COPYING
diff --git a/buildroot/package/git/git.hash b/buildroot/package/git/git.hash
index 35c8774d7..c258abf3c 100644
--- a/buildroot/package/git/git.hash
+++ b/buildroot/package/git/git.hash
@@ -1,4 +1,4 @@
 # From: https://www.kernel.org/pub/software/scm/git/sha256sums.asc
-sha256 dfb71b053cbc38a9c5b08c2fe8b5eae210b4e3b63892426923e10cfd6ba63862  git-2.16.5.tar.xz
+sha256 cd45502a4146d8e77f40cc64b3b484247e6165633bb024d7a9385a85f68e1d52  git-2.16.6.tar.xz
 sha256 5b2198d1645f767585e8a88ac0499b04472164c0d2da22e75ecf97ef443ab32e  COPYING
 sha256 1922f45d2c49e390032c9c0ba6d7cac904087f7cec51af30c2b2ad022ce0e76a  LGPL-2.1
diff --git a/buildroot/package/git/git.mk b/buildroot/package/git/git.mk
index 804a6e232..8866909cc 100644
--- a/buildroot/package/git/git.mk
+++ b/buildroot/package/git/git.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GIT_VERSION = 2.16.5
+GIT_VERSION = 2.16.6
 GIT_SOURCE = git-$(GIT_VERSION).tar.xz
 GIT_SITE = $(BR2_KERNEL_MIRROR)/software/scm/git
 GIT_LICENSE = GPL-2.0, LGPL-2.1+
@@ -66,6 +66,14 @@ ifeq ($(BR2_SYSTEM_ENABLE_NLS),)
 GIT_MAKE_OPTS += NO_GETTEXT=1
 endif
 
+GIT_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+GIT_CFLAGS += -O0
+endif
+
+GIT_CONF_OPTS += CFLAGS="$(GIT_CFLAGS)"
+
 GIT_INSTALL_TARGET_OPTS = $(GIT_MAKE_OPTS) DESTDIR=$(TARGET_DIR) install
 
 # assume yes for these tests, configure will bail out otherwise
diff --git a/buildroot/package/glib-networking/Config.in b/buildroot/package/glib-networking/Config.in
index b84a73946..1a8ebe6c0 100644
--- a/buildroot/package/glib-networking/Config.in
+++ b/buildroot/package/glib-networking/Config.in
@@ -9,6 +9,8 @@ config BR2_PACKAGE_GLIB_NETWORKING
 	help
 	  Network-related GIO modules for glib.
 
+	  https://gitlab.gnome.org/GNOME/glib-networking
+
 comment "glib-networking needs a toolchain w/ wchar, threads, dynamic library"
 	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_STATIC_LIBS
diff --git a/buildroot/package/glib-networking/glib-networking.mk b/buildroot/package/glib-networking/glib-networking.mk
index 325cbcf8a..163f1b0dd 100644
--- a/buildroot/package/glib-networking/glib-networking.mk
+++ b/buildroot/package/glib-networking/glib-networking.mk
@@ -12,7 +12,6 @@ GLIB_NETWORKING_INSTALL_STAGING = YES
 GLIB_NETWORKING_DEPENDENCIES = \
 	$(TARGET_NLS_DEPENDENCIES) \
 	host-pkgconf \
-	host-intltool \
 	libglib2 \
 	gnutls
 
diff --git a/buildroot/package/glibc/glibc-2.28-94-g4aeff335ca19286ee2382d8eba794ae5fd49281a/glibc.hash b/buildroot/package/glibc/glibc-2.28-133-g6578d89c170cc7b524b9bccafffd5b4207bf646f/glibc.hash
similarity index 69%
rename from buildroot/package/glibc/glibc-2.28-94-g4aeff335ca19286ee2382d8eba794ae5fd49281a/glibc.hash
rename to buildroot/package/glibc/glibc-2.28-133-g6578d89c170cc7b524b9bccafffd5b4207bf646f/glibc.hash
index 442ef0d7a..0e2d05be3 100644
--- a/buildroot/package/glibc/glibc-2.28-94-g4aeff335ca19286ee2382d8eba794ae5fd49281a/glibc.hash
+++ b/buildroot/package/glibc/glibc-2.28-133-g6578d89c170cc7b524b9bccafffd5b4207bf646f/glibc.hash
@@ -1,5 +1,5 @@
 # Locally calculated (fetched from Github)
-sha256  295d436aac4dc45afc3b440f85fc4556c03b1140ca0f625ee015c8156d2f52ae  glibc-glibc-2.28-94-g4aeff335ca19286ee2382d8eba794ae5fd49281a.tar.gz
+sha256  8cb918cef45112554dd5efdbe4e3d4bb2909708a2b115a3b612b22bd7c670859  glibc-glibc-2.28-133-g6578d89c170cc7b524b9bccafffd5b4207bf646f.tar.gz
 
 # Hashes for license files
 sha256  8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
diff --git a/buildroot/package/glibc/glibc.mk b/buildroot/package/glibc/glibc.mk
index cb6f8097d..dcf012656 100644
--- a/buildroot/package/glibc/glibc.mk
+++ b/buildroot/package/glibc/glibc.mk
@@ -13,7 +13,7 @@ GLIBC_SITE = $(call github,riscv,riscv-glibc,$(GLIBC_VERSION))
 else
 # Generate version string using:
 #   git describe --match 'glibc-*' --abbrev=40 origin/release/MAJOR.MINOR/master
-GLIBC_VERSION = glibc-2.28-94-g4aeff335ca19286ee2382d8eba794ae5fd49281a
+GLIBC_VERSION = glibc-2.28-133-g6578d89c170cc7b524b9bccafffd5b4207bf646f
 # Upstream doesn't officially provide an https download link.
 # There is one (https://sourceware.org/git/glibc.git) but it's not reliable,
 # sometimes the connection times out. So use an unofficial github mirror.
diff --git a/buildroot/package/gnupg2/gnupg2.hash b/buildroot/package/gnupg2/gnupg2.hash
index f985e11ad..2dee44283 100644
--- a/buildroot/package/gnupg2/gnupg2.hash
+++ b/buildroot/package/gnupg2/gnupg2.hash
@@ -1,7 +1,7 @@
-# From https://lists.gnupg.org/pipermail/gnupg-announce/2018q4/000433.html
-sha1 2aeccc35ea8034306ff7a1072b84abbaa79619c3  gnupg-2.2.12.tar.bz2
+# From https://lists.gnupg.org/pipermail/gnupg-announce/2019q4/000443.html
+sha1 e24a1208ffe69d7436b2f27e99542a85f34d0ac0  gnupg-2.2.19.tar.bz2
 # Calculated based on the hash above and signature
-# https://gnupg.org/ftp/gcrypt/gnupg/gnupg-2.2.12.tar.bz2.sig
+# https://gnupg.org/ftp/gcrypt/gnupg/gnupg-2.2.19.tar.bz2.sig
 # using key D8692123C4065DEA5E0F3AB5249B39D24F25E3B6
-sha256 db030f8b4c98640e91300d36d516f1f4f8fe09514a94ea9fc7411ee1a34082cb  gnupg-2.2.12.tar.bz2
+sha256 242554c0e06f3a83c420b052f750b65ead711cc3fddddb5e7274fcdbb4e9dec0  gnupg-2.2.19.tar.bz2
 sha256 bc2d6664f6276fa0a72d57633b3ae68dc7dcb677b71018bf08c8e93e509f1357  COPYING
diff --git a/buildroot/package/gnupg2/gnupg2.mk b/buildroot/package/gnupg2/gnupg2.mk
index 9365e960f..28e946b40 100644
--- a/buildroot/package/gnupg2/gnupg2.mk
+++ b/buildroot/package/gnupg2/gnupg2.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GNUPG2_VERSION = 2.2.12
+GNUPG2_VERSION = 2.2.19
 GNUPG2_SOURCE = gnupg-$(GNUPG2_VERSION).tar.bz2
 GNUPG2_SITE = https://gnupg.org/ftp/gcrypt/gnupg
 GNUPG2_LICENSE = GPL-3.0+
diff --git a/buildroot/package/gnuradio/Config.in b/buildroot/package/gnuradio/Config.in
index 6d0669779..80f6a1c53 100644
--- a/buildroot/package/gnuradio/Config.in
+++ b/buildroot/package/gnuradio/Config.in
@@ -66,11 +66,15 @@ config BR2_PACKAGE_GNURADIO_PYTHON
 	bool "python support"
 	depends on BR2_PACKAGE_PYTHON
 	depends on BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS
+	depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL # python-numpy
 	select BR2_PACKAGE_BOOST_PYTHON
 	select BR2_PACKAGE_PYTHON_NUMPY # runtime
 	help
 	  Enable python component
 
+comment "python support needs glibc or musl"
+	depends on !(BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL)
+
 config BR2_PACKAGE_GNURADIO_UTILS
 	bool "gr-utils support"
 	depends on BR2_PACKAGE_GNURADIO_PYTHON
diff --git a/buildroot/package/gnutls/gnutls.mk b/buildroot/package/gnutls/gnutls.mk
index e7c596820..f2e654fc1 100644
--- a/buildroot/package/gnutls/gnutls.mk
+++ b/buildroot/package/gnutls/gnutls.mk
@@ -46,7 +46,7 @@ endif
 
 # Prerequisite for crywrap
 ifeq ($(BR2_PACKAGE_ARGP_STANDALONE),y)
-GNUTLS_CONF_ENV += LIBS="-largp"
+GNUTLS_LIBS += -largp
 GNUTLS_DEPENDENCIES += argp-standalone
 endif
 
@@ -86,4 +86,10 @@ else ifeq ($(BR2_PACKAGE_CA_CERTIFICATES),y)
 GNUTLS_CONF_OPTS += --with-default-trust-store-file=/etc/ssl/certs/ca-certificates.crt
 endif
 
+ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
+GNUTLS_LIBS += -latomic
+endif
+
+GNUTLS_CONF_ENV += LIBS="$(GNUTLS_LIBS)"
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/go/0002-Fix-CVE-2019-16276.patch b/buildroot/package/go/0002-Fix-CVE-2019-16276.patch
new file mode 100644
index 000000000..c3fe163c3
--- /dev/null
+++ b/buildroot/package/go/0002-Fix-CVE-2019-16276.patch
@@ -0,0 +1,123 @@
+From: "Dr. Tobias Quathamer" 
+Date: Thu, 26 Sep 2019 11:46:46 +0200
+Subject: Fix CVE-2019-16276
+
+Cherry-picked from upstream:
+https://github.com/golang/go/commit/6e6f4aaf70c8b1cc81e65a26332aa9409de03ad8
+
+[Upstream: https://sources.debian.org/src/golang-1.11/1.11.6-1+deb10u2/debian/patches/0007-Fix-CVE-2019-16276.patch]
+Signed-off-by: Peter Korsgaard 
+---
+ src/net/http/serve_test.go       |  4 ++++
+ src/net/http/transport_test.go   | 27 +++++++++++++++++++++++++++
+ src/net/textproto/reader.go      | 10 ++--------
+ src/net/textproto/reader_test.go | 13 ++++++-------
+ 4 files changed, 39 insertions(+), 15 deletions(-)
+
+diff --git a/src/net/http/serve_test.go b/src/net/http/serve_test.go
+index a438541..18edf98 100644
+--- a/src/net/http/serve_test.go
++++ b/src/net/http/serve_test.go
+@@ -4725,6 +4725,10 @@ func TestServerValidatesHeaders(t *testing.T) {
+ 		{"foo\xffbar: foo\r\n", 400},                         // binary in header
+ 		{"foo\x00bar: foo\r\n", 400},                         // binary in header
+ 		{"Foo: " + strings.Repeat("x", 1<<21) + "\r\n", 431}, // header too large
++		// Spaces between the header key and colon are not allowed.
++		// See RFC 7230, Section 3.2.4.
++		{"Foo : bar\r\n", 400},
++		{"Foo\t: bar\r\n", 400},
+ 
+ 		{"foo: foo foo\r\n", 200},    // LWS space is okay
+ 		{"foo: foo\tfoo\r\n", 200},   // LWS tab is okay
+diff --git a/src/net/http/transport_test.go b/src/net/http/transport_test.go
+index b2036df..dff940e 100644
+--- a/src/net/http/transport_test.go
++++ b/src/net/http/transport_test.go
+@@ -4838,3 +4838,30 @@ func TestClientTimeoutKillsConn_AfterHeaders(t *testing.T) {
+ 		t.Fatal("timeout")
+ 	}
+ }
++
++func TestInvalidHeaderResponse(t *testing.T) {
++	setParallel(t)
++	defer afterTest(t)
++	cst := newClientServerTest(t, h1Mode, HandlerFunc(func(w ResponseWriter, r *Request) {
++		conn, buf, _ := w.(Hijacker).Hijack()
++		buf.Write([]byte("HTTP/1.1 200 OK\r\n" +
++			"Date: Wed, 30 Aug 2017 19:09:27 GMT\r\n" +
++			"Content-Type: text/html; charset=utf-8\r\n" +
++			"Content-Length: 0\r\n" +
++			"Foo : bar\r\n\r\n"))
++		buf.Flush()
++		conn.Close()
++	}))
++	defer cst.close()
++	res, err := cst.c.Get(cst.ts.URL)
++	if err != nil {
++		t.Fatal(err)
++	}
++	defer res.Body.Close()
++	if v := res.Header.Get("Foo"); v != "" {
++		t.Errorf(`unexpected "Foo" header: %q`, v)
++	}
++	if v := res.Header.Get("Foo "); v != "bar" {
++		t.Errorf(`bad "Foo " header value: %q, want %q`, v, "bar")
++	}
++}
+diff --git a/src/net/textproto/reader.go b/src/net/textproto/reader.go
+index feb464b..6a37b2d 100644
+--- a/src/net/textproto/reader.go
++++ b/src/net/textproto/reader.go
+@@ -492,18 +492,12 @@ func (r *Reader) ReadMIMEHeader() (MIMEHeader, error) {
+ 			return m, err
+ 		}
+ 
+-		// Key ends at first colon; should not have trailing spaces
+-		// but they appear in the wild, violating specs, so we remove
+-		// them if present.
++		// Key ends at first colon.
+ 		i := bytes.IndexByte(kv, ':')
+ 		if i < 0 {
+ 			return m, ProtocolError("malformed MIME header line: " + string(kv))
+ 		}
+-		endKey := i
+-		for endKey > 0 && kv[endKey-1] == ' ' {
+-			endKey--
+-		}
+-		key := canonicalMIMEHeaderKey(kv[:endKey])
++		key := canonicalMIMEHeaderKey(kv[:i])
+ 
+ 		// As per RFC 7230 field-name is a token, tokens consist of one or more chars.
+ 		// We could return a ProtocolError here, but better to be liberal in what we
+diff --git a/src/net/textproto/reader_test.go b/src/net/textproto/reader_test.go
+index 7cff7b4..3af77d2 100644
+--- a/src/net/textproto/reader_test.go
++++ b/src/net/textproto/reader_test.go
+@@ -188,11 +188,10 @@ func TestLargeReadMIMEHeader(t *testing.T) {
+ 	}
+ }
+ 
+-// Test that we read slightly-bogus MIME headers seen in the wild,
+-// with spaces before colons, and spaces in keys.
++// TestReadMIMEHeaderNonCompliant checks that we don't normalize headers
++// with spaces before colons, and accept spaces in keys.
+ func TestReadMIMEHeaderNonCompliant(t *testing.T) {
+-	// Invalid HTTP response header as sent by an Axis security
+-	// camera: (this is handled by IE, Firefox, Chrome, curl, etc.)
++	// These invalid headers will be rejected by net/http according to RFC 7230.
+ 	r := reader("Foo: bar\r\n" +
+ 		"Content-Language: en\r\n" +
+ 		"SID : 0\r\n" +
+@@ -202,9 +201,9 @@ func TestReadMIMEHeaderNonCompliant(t *testing.T) {
+ 	want := MIMEHeader{
+ 		"Foo":              {"bar"},
+ 		"Content-Language": {"en"},
+-		"Sid":              {"0"},
+-		"Audio Mode":       {"None"},
+-		"Privilege":        {"127"},
++		"SID ":             {"0"},
++		"Audio Mode ":      {"None"},
++		"Privilege ":       {"127"},
+ 	}
+ 	if !reflect.DeepEqual(m, want) || err != nil {
+ 		t.Fatalf("ReadMIMEHeader =\n%v, %v; want:\n%v", m, err, want)
diff --git a/buildroot/package/go/0003-Fix-CVE-2019-17596.patch b/buildroot/package/go/0003-Fix-CVE-2019-17596.patch
new file mode 100644
index 000000000..33a5baad5
--- /dev/null
+++ b/buildroot/package/go/0003-Fix-CVE-2019-17596.patch
@@ -0,0 +1,27 @@
+From: "Dr. Tobias Quathamer" 
+Date: Sat, 19 Oct 2019 14:03:22 +0200
+Subject: Fix CVE-2019-17596
+
+Cherry-picked from upstream:
+https://github.com/golang/go/commit/2017d88dbc096381d4f348d2fb08bfb3c2b7ed73
+
+[Upstream: https://sources.debian.org/src/golang-1.11/1.11.6-1+deb10u3/debian/patches/0008-Fix-CVE-2019-17596.patch]
+Signed-off-by: Peter Korsgaard 
+---
+ src/crypto/dsa/dsa.go | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/src/crypto/dsa/dsa.go b/src/crypto/dsa/dsa.go
+index 575314b..2fc4f1f 100644
+--- a/src/crypto/dsa/dsa.go
++++ b/src/crypto/dsa/dsa.go
+@@ -279,6 +279,9 @@ func Verify(pub *PublicKey, hash []byte, r, s *big.Int) bool {
+ 	}
+ 
+ 	w := new(big.Int).ModInverse(s, pub.Q)
++	if w == nil {
++		return false
++	}
+ 
+ 	n := pub.Q.BitLen()
+ 	if n&7 != 0 {
diff --git a/buildroot/package/go/go.hash b/buildroot/package/go/go.hash
index 77aa273aa..2b6248e92 100644
--- a/buildroot/package/go/go.hash
+++ b/buildroot/package/go/go.hash
@@ -1,3 +1,3 @@
 # From https://golang.org/dl/
-sha256	ee80684b352f8d6b49d804d4e615f015ae92da41c4096cfee89ed4783b2498e3  go1.11.9.src.tar.gz
+sha256	5032095fd3f641cafcce164f551e5ae873785ce7b07ca7c143aecd18f7ba4076  go1.11.13.src.tar.gz
 sha256	2d36597f7117c38b006835ae7f537487207d8ec407aa9d9980794b2030cbc067  LICENSE
diff --git a/buildroot/package/go/go.mk b/buildroot/package/go/go.mk
index 6b8b0de6b..f510440a8 100644
--- a/buildroot/package/go/go.mk
+++ b/buildroot/package/go/go.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GO_VERSION = 1.11.9
+GO_VERSION = 1.11.13
 GO_SITE = https://storage.googleapis.com/golang
 GO_SOURCE = go$(GO_VERSION).src.tar.gz
 
diff --git a/buildroot/package/gob2/gob2.hash b/buildroot/package/gob2/gob2.hash
index 3678bdd5c..7edf518f3 100644
--- a/buildroot/package/gob2/gob2.hash
+++ b/buildroot/package/gob2/gob2.hash
@@ -1,2 +1,4 @@
 # Locally calculated
 sha256 f7ee84c07ca88ae96e5a60461957cc4dd0aa69d61804433d1c85de3d50be8026  gob2-2.0.20.tar.xz
+sha256 b8a2f73f743dc1a51aff23f1aacbca4b868564db52496fa3c0caba755bfd1eaf  COPYING
+sha256 7222386392eecf784e2f0c406f412f238cb6d25865a8447ae0947b32bb569889  COPYING.generated-code
diff --git a/buildroot/package/gob2/gob2.mk b/buildroot/package/gob2/gob2.mk
index fe6067382..d0cce8fb7 100644
--- a/buildroot/package/gob2/gob2.mk
+++ b/buildroot/package/gob2/gob2.mk
@@ -7,6 +7,8 @@
 GOB2_VERSION = 2.0.20
 GOB2_SOURCE = gob2-$(GOB2_VERSION).tar.xz
 GOB2_SITE = http://ftp.5z.com/pub/gob
+GOB2_LICENSE = GPL-2.0+
+GOB2_LICENSE_FILES = COPYING COPYING.generated-code
 HOST_GOB2_DEPENDENCIES = host-bison host-flex host-libglib2
 
 $(eval $(host-autotools-package))
diff --git a/buildroot/package/gqview/Config.in b/buildroot/package/gqview/Config.in
index c1df40cc1..a654dc41f 100644
--- a/buildroot/package/gqview/Config.in
+++ b/buildroot/package/gqview/Config.in
@@ -4,4 +4,4 @@ config BR2_PACKAGE_GQVIEW
 	help
 	  GQview is an image viewer for Unix operating systems
 
-	  http://prdownloads.sourceforge.net/gqview
+	  http://gqview.sourceforge.net/
diff --git a/buildroot/package/gr-osmosdr/Config.in b/buildroot/package/gr-osmosdr/Config.in
index aa6ef0d4c..f26380371 100644
--- a/buildroot/package/gr-osmosdr/Config.in
+++ b/buildroot/package/gr-osmosdr/Config.in
@@ -5,6 +5,8 @@ config BR2_PACKAGE_GR_OSMOSDR
 	help
 	  GNU Radio block for interfacing with various radio hardware
 
+	  http://osmocom.org/projects/osmosdr
+
 if BR2_PACKAGE_GR_OSMOSDR
 
 config BR2_PACKAGE_GR_OSMOSDR_PYTHON
diff --git a/buildroot/package/gstreamer1/gst1-plugins-bad/Config.in b/buildroot/package/gstreamer1/gst1-plugins-bad/Config.in
index f0a846116..d36316bf3 100644
--- a/buildroot/package/gstreamer1/gst1-plugins-bad/Config.in
+++ b/buildroot/package/gstreamer1/gst1-plugins-bad/Config.in
@@ -567,7 +567,6 @@ config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_WEBRTCDSP
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
 	depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL
 	select BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING
-	select BR2_PACKAGE_WEBRTC
 	help
 	  WebRTC echo-cancellation, gain control and noise suppression
 
diff --git a/buildroot/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk b/buildroot/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk
index a86b137ce..a5df7c66b 100644
--- a/buildroot/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk
+++ b/buildroot/package/gstreamer1/gst1-rtsp-server/gst1-rtsp-server.mk
@@ -15,6 +15,9 @@ GST1_RTSP_SERVER_DEPENDENCIES = \
 	gstreamer1 \
 	gst1-plugins-base \
 	gst1-plugins-good
+GST1_RTSP_SERVER_CONF_OPTS = \
+	--disable-examples \
+	--disable-tests
 
 ifeq ($(BR2_PACKAGE_LIBCGROUP),y)
 GST1_RTSP_SERVER_DEPENDENCIES += libcgroup
diff --git a/buildroot/package/gtkperf/Config.in b/buildroot/package/gtkperf/Config.in
index 78c35e72e..a763e305c 100644
--- a/buildroot/package/gtkperf/Config.in
+++ b/buildroot/package/gtkperf/Config.in
@@ -7,3 +7,5 @@ config BR2_PACKAGE_GTKPERF
 	  predefined GTK+ widgets
 	  e.g. (opening comboboxes, toggling buttons, scrolling text
 	  yms.) and this way define the speed of device/platform.
+
+	  http://gtkperf.sourceforge.net/
diff --git a/buildroot/package/gtkperf/gtkperf.hash b/buildroot/package/gtkperf/gtkperf.hash
index 819851dd0..72f35a26f 100644
--- a/buildroot/package/gtkperf/gtkperf.hash
+++ b/buildroot/package/gtkperf/gtkperf.hash
@@ -1,2 +1,3 @@
 # Locally computed:
 sha256  9704344e732038eecbd007dd996a56293a6b027b5b76f3f036273a3fae1ab27b  gtkperf_0.40.tar.gz
+sha256  32b1062f7da84967e7019d01ab805935caa7ab7321a7ced0e30ebe75e5df1670  COPYING
diff --git a/buildroot/package/gtkperf/gtkperf.mk b/buildroot/package/gtkperf/gtkperf.mk
index 1d1230f1e..cc0433984 100644
--- a/buildroot/package/gtkperf/gtkperf.mk
+++ b/buildroot/package/gtkperf/gtkperf.mk
@@ -7,8 +7,9 @@
 GTKPERF_VERSION = 0.40
 GTKPERF_SOURCE = gtkperf_$(GTKPERF_VERSION).tar.gz
 GTKPERF_SITE = http://downloads.sourceforge.net/project/gtkperf/gtkperf/$(GTKPERF_VERSION)
-GTKPERF_DEPENDENCIES = libgtk2
+GTKPERF_DEPENDENCIES = libgtk2 $(TARGET_NLS_DEPENDENCIES)
 GTKPERF_LICENSE = GPL-2.0
 GTKPERF_LICENSE_FILES = COPYING
+GTKPERF_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 $(eval $(autotools-package))
diff --git a/buildroot/package/gupnp-tools/gupnp-tools.mk b/buildroot/package/gupnp-tools/gupnp-tools.mk
index 8f95e04f9..06c7b1fd3 100644
--- a/buildroot/package/gupnp-tools/gupnp-tools.mk
+++ b/buildroot/package/gupnp-tools/gupnp-tools.mk
@@ -19,7 +19,10 @@ GUPNP_TOOLS_DEPENDENCIES = \
 	gssdp \
 	gupnp \
 	libsoup \
-	libgtk3
+	libgtk3 \
+	$(TARGET_NLS_DEPENDENCIES)
+
+GUPNP_TOOLS_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 ifeq ($(BR2_PACKAGE_GUPNP_AV),y)
 GUPNP_TOOLS_CONF_OPTS += --with-av
diff --git a/buildroot/package/gvfs/gvfs.mk b/buildroot/package/gvfs/gvfs.mk
index 47fbe0e85..c380a710f 100644
--- a/buildroot/package/gvfs/gvfs.mk
+++ b/buildroot/package/gvfs/gvfs.mk
@@ -9,13 +9,17 @@ GVFS_VERSION = $(GVFS_VERSION_MAJOR).4
 GVFS_SOURCE = gvfs-$(GVFS_VERSION).tar.xz
 GVFS_SITE = http://ftp.gnome.org/pub/GNOME/sources/gvfs/$(GVFS_VERSION_MAJOR)
 GVFS_INSTALL_STAGING = YES
-GVFS_DEPENDENCIES = host-pkgconf host-libglib2 libglib2 dbus shared-mime-info
+GVFS_DEPENDENCIES = host-pkgconf host-libglib2 libglib2 dbus shared-mime-info \
+	$(TARGET_NLS_DEPENDENCIES)
 GVFS_LICENSE = LGPL-2.0+
 GVFS_LICENSE_FILES = COPYING
+GVFS_LIBS = $(TARGET_NLS_LIBS)
 
 # Export ac_cv_path_LIBGCRYPT_CONFIG unconditionally to prevent
 # build system from searching the host paths.
-GVFS_CONF_ENV = ac_cv_path_LIBGCRYPT_CONFIG=$(STAGING_DIR)/usr/bin/libgcrypt-config
+GVFS_CONF_ENV = \
+	ac_cv_path_LIBGCRYPT_CONFIG=$(STAGING_DIR)/usr/bin/libgcrypt-config \
+	LIBS="$(GVFS_LIBS)"
 
 # Most of these are missing library support
 GVFS_CONF_OPTS = \
@@ -57,6 +61,7 @@ GVFS_CONF_OPTS += \
 	--enable-archive \
 	--with-archive-includes=$(STAGING_DIR)/usr \
 	--with-archive-libs=$(STAGING_DIR)/usr
+GVFS_LIBS += `$(PKG_CONFIG_HOST_BINARY) --libs libarchive`
 else
 GVFS_CONF_OPTS += --disable-archive
 endif
diff --git a/buildroot/package/haproxy/haproxy.hash b/buildroot/package/haproxy/haproxy.hash
index be3451d83..6060400de 100644
--- a/buildroot/package/haproxy/haproxy.hash
+++ b/buildroot/package/haproxy/haproxy.hash
@@ -1,5 +1,5 @@
 # Locally computed:
-sha256	ad46312fa1e38763863807d2c9304551c28ad91cff83f0c21a36756913c1c8e1	haproxy-1.9.1.tar.gz
+sha256	adae40f963b03df0917edc44681064627f77683dcf7db66ef030672ad6d00547	haproxy-1.9.13.tar.gz
 sha256	0717ca51fceaa25ac9e5ccc62e0c727dcf27796057201fb5fded56a25ff6ca28	LICENSE
 sha256	5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a	doc/lgpl.txt
 sha256	ddb9db7630752f8fdc6898f7c99a99eaeeac5213627ecb093df9c82f56175dc7	doc/gpl.txt
diff --git a/buildroot/package/haproxy/haproxy.mk b/buildroot/package/haproxy/haproxy.mk
index e382f61f8..aa440d7d6 100644
--- a/buildroot/package/haproxy/haproxy.mk
+++ b/buildroot/package/haproxy/haproxy.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 HAPROXY_VERSION_MAJOR = 1.9
-HAPROXY_VERSION = $(HAPROXY_VERSION_MAJOR).1
+HAPROXY_VERSION = $(HAPROXY_VERSION_MAJOR).13
 HAPROXY_SITE = http://www.haproxy.org/download/$(HAPROXY_VERSION_MAJOR)/src
 HAPROXY_LICENSE = GPL-2.0+ and LGPL-2.1+ with exceptions
 HAPROXY_LICENSE_FILES = LICENSE doc/lgpl.txt doc/gpl.txt
diff --git a/buildroot/package/haveged/haveged.hash b/buildroot/package/haveged/haveged.hash
index d1133b693..fc7858787 100644
--- a/buildroot/package/haveged/haveged.hash
+++ b/buildroot/package/haveged/haveged.hash
@@ -1,2 +1,3 @@
-# From http://www.issihosts.com/haveged/verify/haveged-1.9.1.sha1
-sha1	ab7234b7f57dbb7d500a5ab3cbf0494715ce6499	haveged-1.9.1.tar.gz
+# Locally calculated
+sha256  4d4c046755476d3734ffb78772c242c25913ff0eb7509c143671dae6ec9d1189	haveged-1.9.6.tar.gz
+sha256  8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903	COPYING
diff --git a/buildroot/package/haveged/haveged.mk b/buildroot/package/haveged/haveged.mk
index a645557bc..afb54df1a 100644
--- a/buildroot/package/haveged/haveged.mk
+++ b/buildroot/package/haveged/haveged.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-HAVEGED_VERSION = 1.9.1
-HAVEGED_SITE = http://www.issihosts.com/haveged
+HAVEGED_VERSION = 1.9.6
+HAVEGED_SITE = $(call github,jirka-h,haveged,v$(HAVEGED_VERSION))
 HAVEGED_LICENSE = GPL-3.0+
 HAVEGED_LICENSE_FILES = COPYING
 
diff --git a/buildroot/package/hicolor-icon-theme/Config.in b/buildroot/package/hicolor-icon-theme/Config.in
index 10edbf886..5ef2cd226 100644
--- a/buildroot/package/hicolor-icon-theme/Config.in
+++ b/buildroot/package/hicolor-icon-theme/Config.in
@@ -7,3 +7,5 @@ config BR2_PACKAGE_HICOLOR_ICON_THEME
 	  standard directory structure for storing icons of third-party
 	  applications (i.e. the ones not available in usual icon
 	  themes).
+
+	  https://www.freedesktop.org/wiki/Software/icon-theme/
diff --git a/buildroot/package/ifenslave/Config.in b/buildroot/package/ifenslave/Config.in
index 2203284db..d28e0f7c2 100644
--- a/buildroot/package/ifenslave/Config.in
+++ b/buildroot/package/ifenslave/Config.in
@@ -4,4 +4,4 @@ config BR2_PACKAGE_IFENSLAVE
 	help
 	  Configure network interfaces for parallel routing (bonding)
 
-	  http://anonscm.debian.org/cgit/collab-maint/ifenslave.git
+	  https://salsa.debian.org/debian/ifenslave
diff --git a/buildroot/package/ifplugd/ifplugd.mk b/buildroot/package/ifplugd/ifplugd.mk
index c7874b49e..06b060741 100644
--- a/buildroot/package/ifplugd/ifplugd.mk
+++ b/buildroot/package/ifplugd/ifplugd.mk
@@ -6,7 +6,7 @@
 
 IFPLUGD_VERSION = 0.28
 IFPLUGD_SITE = http://0pointer.de/lennart/projects/ifplugd
-IFPLUGD_LICENSE = GPL-2.0
+IFPLUGD_LICENSE = GPL-2.0+
 IFPLUGD_LICENSE_FILES = LICENSE
 IFPLUGD_AUTORECONF = YES
 
diff --git a/buildroot/package/imagemagick/imagemagick.hash b/buildroot/package/imagemagick/imagemagick.hash
index e89aa557c..f95fa275d 100644
--- a/buildroot/package/imagemagick/imagemagick.hash
+++ b/buildroot/package/imagemagick/imagemagick.hash
@@ -1,3 +1,3 @@
 # Locally computed
-sha256 2a1ca5f9c38e6596a5ee9fdbbaebba1d21b57618e892c72c8e4e63ced571af40  7.0.8-42.tar.gz
+sha256 238ee17196fcb80bb58485910aaefc12d48f99e4043c2a28f06ff9588161c4e3  7.0.8-59.tar.gz
 sha256 5b47db932754743460eba7a226aea85b63e3408d3c7affb4d0117f70c9594ded  LICENSE
diff --git a/buildroot/package/imagemagick/imagemagick.mk b/buildroot/package/imagemagick/imagemagick.mk
index 5ea79bed4..a0c91f918 100644
--- a/buildroot/package/imagemagick/imagemagick.mk
+++ b/buildroot/package/imagemagick/imagemagick.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IMAGEMAGICK_VERSION = 7.0.8-42
+IMAGEMAGICK_VERSION = 7.0.8-59
 IMAGEMAGICK_SOURCE = $(IMAGEMAGICK_VERSION).tar.gz
 IMAGEMAGICK_SITE = https://github.com/ImageMagick/ImageMagick/archive
 IMAGEMAGICK_LICENSE = Apache-2.0
@@ -181,6 +181,9 @@ HOST_IMAGEMAGICK_CONF_OPTS = \
 	--with-png \
 	--with-zlib
 
+# uses clock_gettime, which was provided by librt in glibc < 2.17
+HOST_IMAGEMAGICK_CONF_ENV = LIBS="-lrt"
+
 HOST_IMAGEMAGICK_DEPENDENCIES = \
 	host-libjpeg \
 	host-libpng \
diff --git a/buildroot/package/intel-microcode/intel-microcode.hash b/buildroot/package/intel-microcode/intel-microcode.hash
index 257cc85c4..f9fce28b2 100644
--- a/buildroot/package/intel-microcode/intel-microcode.hash
+++ b/buildroot/package/intel-microcode/intel-microcode.hash
@@ -1,3 +1,3 @@
 # Locally computed
-sha256 9e67903a5b62b51f5e031b59a8046d3dff226834d79899799943803481a55d20  intel-microcode-microcode-20190514a.tar.gz
+sha256 0000f7cf96f2b07a1ba9d1fc0bcfcb49d0edb91f7d487a57a88c147e57c5873b  intel-microcode-20191112.tar.gz
 sha256 1f8bf63fc2b1b486c507b98ff7d283c7eb58c7945746b94188a310d6787cbee5  license
diff --git a/buildroot/package/intel-microcode/intel-microcode.mk b/buildroot/package/intel-microcode/intel-microcode.mk
index dacb619a1..0492ace69 100644
--- a/buildroot/package/intel-microcode/intel-microcode.mk
+++ b/buildroot/package/intel-microcode/intel-microcode.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-INTEL_MICROCODE_VERSION = microcode-20190514a
-INTEL_MICROCODE_SITE = $(call github,intel,Intel-Linux-Processor-Microcode-Data-Files,$(INTEL_MICROCODE_VERSION))
+INTEL_MICROCODE_VERSION = 20191112
+INTEL_MICROCODE_SITE = $(call github,intel,Intel-Linux-Processor-Microcode-Data-Files,microcode-$(INTEL_MICROCODE_VERSION))
 INTEL_MICROCODE_LICENSE = PROPRIETARY
 INTEL_MICROCODE_LICENSE_FILES = license
 INTEL_MICROCODE_REDISTRIBUTE = NO
diff --git a/buildroot/package/ipsec-tools/ipsec-tools.hash b/buildroot/package/ipsec-tools/ipsec-tools.hash
index b12bea947..7a944eb8e 100644
--- a/buildroot/package/ipsec-tools/ipsec-tools.hash
+++ b/buildroot/package/ipsec-tools/ipsec-tools.hash
@@ -1,3 +1,6 @@
 # From http://sourceforge.net/projects/ipsec-tools/files/ipsec-tools/0.8.2/
 md5	d53ec14a0a3ece64e09e5e34b3350b41	ipsec-tools-0.8.2.tar.bz2
 sha1	7d92cae9fde59fb4f125636698c43b0a3df3d0f0	ipsec-tools-0.8.2.tar.bz2
+
+# Locally calculated
+sha256	3f4af4aef0b2599928bee9875935b8fad8449ddbb98ea7da74c20c3dff5cdef7  src/setkey/setkey.c
diff --git a/buildroot/package/ipsec-tools/ipsec-tools.mk b/buildroot/package/ipsec-tools/ipsec-tools.mk
index 7ac6b5cb2..634d75266 100644
--- a/buildroot/package/ipsec-tools/ipsec-tools.mk
+++ b/buildroot/package/ipsec-tools/ipsec-tools.mk
@@ -7,6 +7,8 @@
 IPSEC_TOOLS_VERSION = 0.8.2
 IPSEC_TOOLS_SOURCE = ipsec-tools-$(IPSEC_TOOLS_VERSION).tar.bz2
 IPSEC_TOOLS_SITE = http://sourceforge.net/projects/ipsec-tools/files/ipsec-tools/$(IPSEC_TOOLS_VERSION)
+IPSEC_TOOLS_LICENSE = BSD-3-Clause
+IPSEC_TOOLS_LICENSE_FILES = src/setkey/setkey.c
 IPSEC_TOOLS_INSTALL_STAGING = YES
 IPSEC_TOOLS_MAKE = $(MAKE1)
 IPSEC_TOOLS_DEPENDENCIES = openssl flex host-pkgconf host-flex host-bison
diff --git a/buildroot/package/iptables/0001-ebtables-vlan-fix-userspace-kernel-headers-collision.patch b/buildroot/package/iptables/0001-ebtables-vlan-fix-userspace-kernel-headers-collision.patch
deleted file mode 100644
index 37c6f96af..000000000
--- a/buildroot/package/iptables/0001-ebtables-vlan-fix-userspace-kernel-headers-collision.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 51d374ba41ae4f1bb851228c06b030b83dd2092f Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Tue, 13 Nov 2018 19:22:08 +0200
-Subject: [PATCH] ebtables: vlan: fix userspace/kernel headers collision
-
-Build with musl libc fails because of conflicting struct ethhdr
-definitions:
-
-In file included from .../sysroot/usr/include/net/ethernet.h:10:0,
-                 from ../iptables/nft-bridge.h:8,
-                 from libebt_vlan.c:18:
-.../sysroot/usr/include/netinet/if_ether.h:107:8: error: redefinition of ‘struct ethhdr’
- struct ethhdr {
-        ^~~~~~
-In file included from libebt_vlan.c:16:0:
-.../sysroot/usr/include/linux/if_ether.h:160:8: note: originally defined here
- struct ethhdr {
-        ^~~~~~
-
-Include the userspace header first for the definition suppression logic
-to do the right thing.
-
-Signed-off-by: Baruch Siach 
-Signed-off-by: Pablo Neira Ayuso 
----
-Upstream status: commit 51d374ba41ae
-
- extensions/libebt_vlan.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/extensions/libebt_vlan.c b/extensions/libebt_vlan.c
-index 4a2eb7126895..be269c6cdb4c 100644
---- a/extensions/libebt_vlan.c
-+++ b/extensions/libebt_vlan.c
-@@ -12,6 +12,7 @@
- #include 
- #include 
- #include 
-+#include 
- #include 
- #include 
- #include "iptables/nft.h"
--- 
-2.19.1
-
diff --git a/buildroot/package/iptables/0002-xtables-monitor-fix-build-with-older-glibc.patch b/buildroot/package/iptables/0002-xtables-monitor-fix-build-with-older-glibc.patch
deleted file mode 100644
index 18dbc28f9..000000000
--- a/buildroot/package/iptables/0002-xtables-monitor-fix-build-with-older-glibc.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 7c8791edac3e74f6ce0bf21f98bc820db8e55e62 Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Fri, 16 Nov 2018 07:23:32 +0200
-Subject: [PATCH] xtables-monitor: fix build with older glibc
-
-glibc older than 2.19 only expose BSD style fields of struct tcphdr when
-_BSD_SOURCE is define. Current glibc however, warn that _BSD_SOURCE is
-deprecated. Migrate to the GNU style of tcphdr fields to make the code
-compatible with any glibc version.
-
-Fix the following build failure:
-
-xtables-monitor.c: In function 'trace_print_packet':
-xtables-monitor.c:406:43: error: 'const struct tcphdr' has no member named 'th_sport'
-    printf("SPORT=%d DPORT=%d ", ntohs(tcph->th_sport), ntohs(tcph->th_dport));
-                                           ^
-xtables-monitor.c:406:66: error: 'const struct tcphdr' has no member named 'th_dport'
-    printf("SPORT=%d DPORT=%d ", ntohs(tcph->th_sport), ntohs(tcph->th_dport));
-                                                                  ^
-...
-
-Signed-off-by: Baruch Siach 
-Signed-off-by: Florian Westphal 
----
-Upstream status: commit 7c8791edac3e74
-
- iptables/xtables-monitor.c | 30 ++++++++++++++----------------
- 1 file changed, 14 insertions(+), 16 deletions(-)
-
-diff --git a/iptables/xtables-monitor.c b/iptables/xtables-monitor.c
-index 3b1ca777a28a..5d1611122df5 100644
---- a/iptables/xtables-monitor.c
-+++ b/iptables/xtables-monitor.c
-@@ -403,26 +403,24 @@ static void trace_print_packet(const struct nftnl_trace *nlt, struct cb_arg *arg
- 		case IPPROTO_UDP:
- 			if (len < 4)
- 				break;
--			printf("SPORT=%d DPORT=%d ", ntohs(tcph->th_sport), ntohs(tcph->th_dport));
-+			printf("SPORT=%d DPORT=%d ", ntohs(tcph->source), ntohs(tcph->dest));
- 			break;
- 		case IPPROTO_TCP:
- 			if (len < sizeof(*tcph))
- 				break;
--			printf("SPORT=%d DPORT=%d ", ntohs(tcph->th_sport), ntohs(tcph->th_dport));
--			if (tcph->th_flags & (TH_FIN|TH_SYN|TH_RST|TH_PUSH|TH_ACK|TH_URG)) {
--				if (tcph->th_flags & TH_SYN)
--					printf("SYN ");
--				if (tcph->th_flags & TH_ACK)
--					printf("ACK ");
--				if (tcph->th_flags & TH_FIN)
--					printf("FIN ");
--				if (tcph->th_flags & TH_RST)
--					printf("RST ");
--				if (tcph->th_flags & TH_PUSH)
--					printf("PSH ");
--				if (tcph->th_flags & TH_URG)
--					printf("URG ");
--			}
-+			printf("SPORT=%d DPORT=%d ", ntohs(tcph->source), ntohs(tcph->dest));
-+			if (tcph->syn)
-+				printf("SYN ");
-+			if (tcph->ack)
-+				printf("ACK ");
-+			if (tcph->fin)
-+				printf("FIN ");
-+			if (tcph->rst)
-+				printf("RST ");
-+			if (tcph->psh)
-+				printf("PSH ");
-+			if (tcph->urg)
-+				printf("URG ");
- 			break;
- 		default:
- 			break;
--- 
-2.19.1
-
diff --git a/buildroot/package/iptables/0003-include-fix-build-with-kernel-headers-before-4.2.patch b/buildroot/package/iptables/0003-include-fix-build-with-kernel-headers-before-4.2.patch
deleted file mode 100644
index c5cd6437f..000000000
--- a/buildroot/package/iptables/0003-include-fix-build-with-kernel-headers-before-4.2.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 8d9d7e4b9ef4c6e6abab2cf35c747d7ca36824bd Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Fri, 16 Nov 2018 09:30:33 +0200
-Subject: [PATCH] include: fix build with kernel headers before 4.2
-
-Commit 672accf1530 (include: update kernel netfilter header files)
-updated linux/netfilter.h and brought with it the update from kernel
-commit a263653ed798 (netfilter: don't pull include/linux/netfilter.h
-from netns headers). This triggers conflict of headers that is fixed in
-kernel commit 279c6c7fa64f (api: fix compatibility of linux/in.h with
-netinet/in.h) included in kernel version 4.2. For earlier kernel headers
-we need a workaround that prevents the headers conflict.
-
-Fixes the following build failure:
-
-In file included from .../sysroot/usr/include/netinet/ip.h:25:0,
-                 from ../include/libiptc/ipt_kernel_headers.h:8,
-                 from ../include/libiptc/libiptc.h:6,
-                 from libip4tc.c:29:
-.../sysroot/usr/include/linux/in.h:26:3: error: redeclaration of enumerator ‘IPPROTO_IP’
-   IPPROTO_IP = 0,  /* Dummy protocol for TCP  */
-   ^
-.../sysroot/usr/include/netinet/in.h:33:5: note: previous definition of ‘IPPROTO_IP’ was here
-     IPPROTO_IP = 0,    /* Dummy protocol for TCP.  */
-     ^~~~~~~~~~
-
-Signed-off-by: Baruch Siach 
-Signed-off-by: Florian Westphal 
----
-Upstream status: commit 8d9d7e4b9ef4c6
-
- include/linux/netfilter.h | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
-index c3f087ac680c..bacf8cd92116 100644
---- a/include/linux/netfilter.h
-+++ b/include/linux/netfilter.h
-@@ -3,7 +3,9 @@
- 
- #include 
- 
-+#ifndef _NETINET_IN_H
- #include 
-+#endif
- #include 
- #include 
- 
--- 
-2.19.1
-
diff --git a/buildroot/package/iptables/0004-xtables-monitor-fix-build-with-musl-libc.patch b/buildroot/package/iptables/0004-xtables-monitor-fix-build-with-musl-libc.patch
deleted file mode 100644
index 0b6358b25..000000000
--- a/buildroot/package/iptables/0004-xtables-monitor-fix-build-with-musl-libc.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 90b0d3abfc0b4150b198eb17080d75acc5838a59 Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Sat, 17 Nov 2018 22:20:08 +0200
-Subject: [PATCH] xtables-monitor: fix build with musl libc
-
-Commit 7c8791edac3 ("xtables-monitor: fix build with older glibc")
-changed the code to use GNU style tcphdr fields. Unfortunately, musl
-libc requires _GNU_SOURCE definition to expose these fields.
-
-Fix the following build failure:
-
-xtables-monitor.c: In function ‘trace_print_packet’:
-xtables-monitor.c:406:43: error: ‘const struct tcphdr’ has no member named ‘source’
-    printf("SPORT=%d DPORT=%d ", ntohs(tcph->source), ntohs(tcph->dest));
-                                           ^~
-xtables-monitor.c:406:64: error: ‘const struct tcphdr’ has no member named ‘dest’
-    printf("SPORT=%d DPORT=%d ", ntohs(tcph->source), ntohs(tcph->dest));
-                                                                ^~
-...
-
-Cc: Florian Westphal 
-Signed-off-by: Baruch Siach 
-Signed-off-by: Florian Westphal 
----
-Upstream status: commit 90b0d3abfc0b
-
- iptables/xtables-monitor.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/iptables/xtables-monitor.c b/iptables/xtables-monitor.c
-index 5d1611122df5..f835c5e503e0 100644
---- a/iptables/xtables-monitor.c
-+++ b/iptables/xtables-monitor.c
-@@ -9,6 +9,7 @@
-  * This software has been sponsored by Sophos Astaro 
-  */
- 
-+#define _GNU_SOURCE
- #include 
- #include 
- #include 
--- 
-2.19.1
-
diff --git a/buildroot/package/iptables/0005-include-extend-the-headers-conflict-workaround-to-in.patch b/buildroot/package/iptables/0005-include-extend-the-headers-conflict-workaround-to-in.patch
deleted file mode 100644
index 6b1ffbd63..000000000
--- a/buildroot/package/iptables/0005-include-extend-the-headers-conflict-workaround-to-in.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 23dee088cd54aae94f1b71046f2ab2b206eedd42 Mon Sep 17 00:00:00 2001
-Message-Id: <23dee088cd54aae94f1b71046f2ab2b206eedd42.1543092537.git.baruch@tkos.co.il>
-From: Baruch Siach 
-Date: Sat, 24 Nov 2018 22:33:37 +0200
-Subject: [PATCH] include: extend the headers conflict workaround to in6.h
-
-Commit 8d9d7e4b9ef ("include: fix build with kernel headers before 4.2")
-introduced a kernel/user headers conflict workaround that allows build
-of iptables with kernel headers older than 4.2. This minor extension
-allows build with kernel headers older than 3.12, which is the version
-that introduced explicit IP headers synchronization.
-
-Cc: Florian Westphal 
-Signed-off-by: Baruch Siach 
----
-Upstream status: https://www.spinics.net/lists/netfilter-devel/msg57029.html
-
- include/linux/netfilter.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
-index bacf8cd92116..042d8b1478e0 100644
---- a/include/linux/netfilter.h
-+++ b/include/linux/netfilter.h
-@@ -5,8 +5,8 @@
- 
- #ifndef _NETINET_IN_H
- #include 
--#endif
- #include 
-+#endif
- #include 
- 
- /* Responses from hook functions. */
--- 
-2.19.1
-
diff --git a/buildroot/package/iptables/iptables.hash b/buildroot/package/iptables/iptables.hash
index d84bd3af9..2e149aa11 100644
--- a/buildroot/package/iptables/iptables.hash
+++ b/buildroot/package/iptables/iptables.hash
@@ -1,4 +1,4 @@
 # From https://netfilter.org/projects/iptables/downloads.html
-sha256 a3778b50ed1a3256f9ca975de82c2204e508001fc2471238c8c97f3d1c4c12af  iptables-1.8.2.tar.bz2
+sha256 a23cac034181206b4545f4e7e730e76e08b5f3dd78771ba9645a6756de9cdd80  iptables-1.8.3.tar.bz2
 # Locally calculated
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
diff --git a/buildroot/package/iptables/iptables.mk b/buildroot/package/iptables/iptables.mk
index 54494937a..ae5cf4ddd 100644
--- a/buildroot/package/iptables/iptables.mk
+++ b/buildroot/package/iptables/iptables.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IPTABLES_VERSION = 1.8.2
+IPTABLES_VERSION = 1.8.3
 IPTABLES_SOURCE = iptables-$(IPTABLES_VERSION).tar.bz2
 IPTABLES_SITE = https://netfilter.org/projects/iptables/files
 IPTABLES_INSTALL_STAGING = YES
diff --git a/buildroot/package/irssi/irssi.hash b/buildroot/package/irssi/irssi.hash
index 0f298137b..6a91e1648 100644
--- a/buildroot/package/irssi/irssi.hash
+++ b/buildroot/package/irssi/irssi.hash
@@ -1,4 +1,4 @@
 # Locally calculated after checking pgp signature
-sha256	1b386ca026aa1875c380fd00ef1d24b71fb87cdae39ef5349ecca16c4567feac  irssi-1.0.7.tar.xz
+sha256	414fdee2ffaeb90a55f141b7fb3899608631dc891e2bc1f5e91ca31f1a621101  irssi-1.0.8.tar.xz
 # Locally calculated
 sha256	a1a27cb2ecee8d5378fbb3562f577104a445d6d66fee89286e16758305e63e2b  COPYING
diff --git a/buildroot/package/irssi/irssi.mk b/buildroot/package/irssi/irssi.mk
index 611365f88..4d7268d29 100644
--- a/buildroot/package/irssi/irssi.mk
+++ b/buildroot/package/irssi/irssi.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-IRSSI_VERSION = 1.0.7
+IRSSI_VERSION = 1.0.8
 IRSSI_SOURCE = irssi-$(IRSSI_VERSION).tar.xz
 # Do not use the github helper here. The generated tarball is *NOT* the
 # same as the one uploaded by upstream for the release.
diff --git a/buildroot/package/iw/Config.in b/buildroot/package/iw/Config.in
index fd73b2099..8a74e3b2a 100644
--- a/buildroot/package/iw/Config.in
+++ b/buildroot/package/iw/Config.in
@@ -5,7 +5,7 @@ config BR2_PACKAGE_IW
 	help
 	  Utility for wireless devices using the mac80211 kernel stack
 
-	  http://wireless.kernel.org/en/users/Documentation/iw
+	  https://wireless.wiki.kernel.org/en/users/documentation/iw
 
 comment "iw needs a toolchain w/ threads"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/jasper/0001-verify-data-range-CVE-2018-19541.patch b/buildroot/package/jasper/0001-verify-data-range-CVE-2018-19541.patch
new file mode 100644
index 000000000..35b4299dc
--- /dev/null
+++ b/buildroot/package/jasper/0001-verify-data-range-CVE-2018-19541.patch
@@ -0,0 +1,35 @@
+From 24fc4d6f01d2d4c8297d1bebec02360f796e01c2 Mon Sep 17 00:00:00 2001
+From: Michael Vetter 
+Date: Mon, 4 Nov 2019 18:17:44 +0100
+Subject: [PATCH] Verify range data in jp2_pclr_getdata
+
+This fixes CVE-2018-19541.
+We need to verify the data is in the expected range. Otherwise we get
+problems later.
+
+This is a better fix for https://github.com/mdadams/jasper/pull/199
+which caused segfaults under certain circumstances.
+
+Patch by Adam Majer 
+Signed-off-by: Michael Vetter 
+---
+ src/libjasper/jp2/jp2_cod.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/src/libjasper/jp2/jp2_cod.c b/src/libjasper/jp2/jp2_cod.c
+index 890e6ad..0f8d804 100644
+--- a/src/libjasper/jp2/jp2_cod.c
++++ b/src/libjasper/jp2/jp2_cod.c
+@@ -855,6 +855,12 @@ static int jp2_pclr_getdata(jp2_box_t *box, jas_stream_t *in)
+ 	  jp2_getuint8(in, &pclr->numchans)) {
+ 		return -1;
+ 	}
++
++    // verify in range data as per I.5.3.4 - Palette box
++    if (pclr->numchans < 1 || pclr->numlutents < 1 || pclr->numlutents > 1024) {
++        return -1;
++    }
++
+ 	lutsize = pclr->numlutents * pclr->numchans;
+ 	if (!(pclr->lutdata = jas_alloc2(lutsize, sizeof(int_fast32_t)))) {
+ 		return -1;
diff --git a/buildroot/package/jasper/0002-check-null-in-jp2_decode-CVE-2018-19542.patch b/buildroot/package/jasper/0002-check-null-in-jp2_decode-CVE-2018-19542.patch
new file mode 100644
index 000000000..515a6162c
--- /dev/null
+++ b/buildroot/package/jasper/0002-check-null-in-jp2_decode-CVE-2018-19542.patch
@@ -0,0 +1,24 @@
+From fc62d1b7164ded2405fd6a0604548b34a5a77462 Mon Sep 17 00:00:00 2001
+From: Timothy Lyanguzov 
+Date: Mon, 18 Mar 2019 16:46:24 +1300
+Subject: [PATCH] Fix CVE-2018-19542: Check for NULL pointer in jp2_decode
+
+Signed-off-by: Michael Vetter 
+---
+ src/libjasper/jp2/jp2_dec.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/src/libjasper/jp2/jp2_dec.c b/src/libjasper/jp2/jp2_dec.c
+index 03b0eaf..a535c19 100644
+--- a/src/libjasper/jp2/jp2_dec.c
++++ b/src/libjasper/jp2/jp2_dec.c
+@@ -388,6 +388,9 @@ jas_image_t *jp2_decode(jas_stream_t *in, const char *optstr)
+ 				jas_image_setcmpttype(dec->image, newcmptno, jp2_getct(jas_image_clrspc(dec->image), 0, channo + 1));
+ 				}
+ #endif
++			} else {
++				jas_eprintf("error: invalid MTYP in CMAP box\n");
++				goto error;
+ 			}
+ 		}
+ 	}
diff --git a/buildroot/package/jasper/0003-test-asclen-CVE-2018-19540.patch b/buildroot/package/jasper/0003-test-asclen-CVE-2018-19540.patch
new file mode 100644
index 000000000..9401da511
--- /dev/null
+++ b/buildroot/package/jasper/0003-test-asclen-CVE-2018-19540.patch
@@ -0,0 +1,29 @@
+From e38454aa1a15b78c028a778fc8bfba3587e25c25 Mon Sep 17 00:00:00 2001
+From: Michael Vetter 
+Date: Fri, 15 Mar 2019 11:01:02 +0100
+Subject: [PATCH] Make sure asclen is at least 1
+
+If txtdesc->asclen is < 1, the array index of txtdesc->ascdata will be negative which causes the heap based overflow.
+
+Regards CVE-2018-19540.
+Regards https://github.com/mdadams/jasper/issues/182 bug#3
+Fix by Markus Koschany .
+From https://gist.github.com/apoleon/13598a45bf6522f6a79b77a629205823
+Signed-off-by: Michael Vetter 
+---
+ src/libjasper/base/jas_icc.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/libjasper/base/jas_icc.c b/src/libjasper/base/jas_icc.c
+index 4607930..762c0e8 100644
+--- a/src/libjasper/base/jas_icc.c
++++ b/src/libjasper/base/jas_icc.c
+@@ -1104,6 +1104,8 @@ static int jas_icctxtdesc_input(jas_iccattrval_t *attrval, jas_stream_t *in,
+ 	if (jas_stream_read(in, txtdesc->ascdata, txtdesc->asclen) !=
+ 	  JAS_CAST(int, txtdesc->asclen))
+ 		goto error;
++	if (txtdesc->asclen < 1)
++		goto error;
+ 	txtdesc->ascdata[txtdesc->asclen - 1] = '\0';
+ 	if (jas_iccgetuint32(in, &txtdesc->uclangcode) ||
+ 	  jas_iccgetuint32(in, &txtdesc->uclen))
diff --git a/buildroot/package/jasper/jasper.hash b/buildroot/package/jasper/jasper.hash
index 4fea367eb..7e9ce0ea9 100644
--- a/buildroot/package/jasper/jasper.hash
+++ b/buildroot/package/jasper/jasper.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 85266eea728f8b14365db9eaf1edc7be4c348704e562bb05095b9a077cf1a97b  jasper-version-2.0.14.tar.gz
+sha256 f1d8b90f231184d99968f361884e2054a1714fdbbd9944ba1ae4ebdcc9bbfdb1  jasper-2.0.16.tar.gz
 sha256 4ad1bb42aff888c4403d792e6e2c5f1716d6c279fea70b296333c9d577d30b81  LICENSE
diff --git a/buildroot/package/jasper/jasper.mk b/buildroot/package/jasper/jasper.mk
index 31fded779..287c35888 100644
--- a/buildroot/package/jasper/jasper.mk
+++ b/buildroot/package/jasper/jasper.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-JASPER_VERSION = version-2.0.14
-JASPER_SITE = $(call github,mdadams,jasper,$(JASPER_VERSION))
+JASPER_VERSION = 2.0.16
+JASPER_SITE = $(call github,mdadams,jasper,version-$(JASPER_VERSION))
 JASPER_INSTALL_STAGING = YES
 JASPER_LICENSE = JasPer-2.0
 JASPER_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/joe/joe.mk b/buildroot/package/joe/joe.mk
index 3d0e9f776..3aef8e4c8 100644
--- a/buildroot/package/joe/joe.mk
+++ b/buildroot/package/joe/joe.mk
@@ -6,7 +6,7 @@
 
 JOE_VERSION = 4.4
 JOE_SITE = http://downloads.sourceforge.net/project/joe-editor/JOE%20sources/joe-$(JOE_VERSION)
-JOE_LICENSE = GPL-1.0+
+JOE_LICENSE = GPL-2.0+
 JOE_LICENSE_FILES = COPYING
 
 ifeq ($(BR2_PACKAGE_NCURSES),y)
diff --git a/buildroot/package/jpeg-turbo/0001-tjLoadImage-Fix-int-overflow-segfault-w-big-BMP.patch b/buildroot/package/jpeg-turbo/0001-tjLoadImage-Fix-int-overflow-segfault-w-big-BMP.patch
deleted file mode 100644
index a10fcf62a..000000000
--- a/buildroot/package/jpeg-turbo/0001-tjLoadImage-Fix-int-overflow-segfault-w-big-BMP.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3d9c64e9f8aa1ee954d1d0bb3390fc894bb84da3 Mon Sep 17 00:00:00 2001
-From: DRC 
-Date: Tue, 1 Jan 2019 18:57:36 -0600
-Subject: [PATCH] tjLoadImage(): Fix int overflow/segfault w/big BMP
-
-Fixes #304
-
-[baruch: drop the ChangeLog.md hunk]
-Signed-off-by: Baruch Siach 
----
-Upstream status: commit 3d9c64e9f8aa
-
- ChangeLog.md | 4 ++++
- turbojpeg.c  | 9 ++++++---
- 2 files changed, 10 insertions(+), 3 deletions(-)
-
-diff --git a/turbojpeg.c b/turbojpeg.c
-index 90a9ce6a0be8..3f7cd640677f 100644
---- a/turbojpeg.c
-+++ b/turbojpeg.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C)2009-2018 D. R. Commander.  All Rights Reserved.
-+ * Copyright (C)2009-2019 D. R. Commander.  All Rights Reserved.
-  *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted provided that the following conditions are met:
-@@ -1960,7 +1960,8 @@ DLLEXPORT unsigned char *tjLoadImage(const char *filename, int *width,
-                                      int align, int *height, int *pixelFormat,
-                                      int flags)
- {
--  int retval = 0, tempc, pitch;
-+  int retval = 0, tempc;
-+  size_t pitch;
-   tjhandle handle = NULL;
-   tjinstance *this;
-   j_compress_ptr cinfo = NULL;
-@@ -2013,7 +2014,9 @@ DLLEXPORT unsigned char *tjLoadImage(const char *filename, int *width,
-   *pixelFormat = cs2pf[cinfo->in_color_space];
- 
-   pitch = PAD((*width) * tjPixelSize[*pixelFormat], align);
--  if ((dstBuf = (unsigned char *)malloc(pitch * (*height))) == NULL)
-+  if ((unsigned long long)pitch * (unsigned long long)(*height) >
-+      (unsigned long long)((size_t)-1) ||
-+      (dstBuf = (unsigned char *)malloc(pitch * (*height))) == NULL)
-     _throwg("tjLoadImage(): Memory allocation failure");
- 
-   if (setjmp(this->jerr.setjmp_buffer)) {
--- 
-2.20.1
-
diff --git a/buildroot/package/jpeg-turbo/0002-wrbmp.c-Don-t-allow-quantization-w-non-RGB-CS.patch b/buildroot/package/jpeg-turbo/0002-wrbmp.c-Don-t-allow-quantization-w-non-RGB-CS.patch
deleted file mode 100644
index 3e4e5bd08..000000000
--- a/buildroot/package/jpeg-turbo/0002-wrbmp.c-Don-t-allow-quantization-w-non-RGB-CS.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From f8cca819a4fb42aafa5f70df43c45e8c416d716f Mon Sep 17 00:00:00 2001
-From: DRC 
-Date: Tue, 1 Jan 2019 20:32:40 -0600
-Subject: [PATCH] wrbmp.c: Don't allow quantization w/ non-RGB CS
-
-If cinfo->quantize_colors == 1, then jpeg_calc_output_dimensions() will
-set cinfo->output_components to 1, and if cinfo->out_color_space is not
-RGB (or extended RGB), hilarity will ensue.
-
-Fixes #305
-
-[baruch: drop the ChangeLog.md hunk]
-Signed-off-by: Baruch Siach 
----
-Upstream status: commit f8cca819a4
-
- ChangeLog.md | 4 ++++
- wrbmp.c      | 5 +++--
- 2 files changed, 7 insertions(+), 2 deletions(-)
-
-diff --git a/wrbmp.c b/wrbmp.c
-index 4bf81426b0ef..239f64eb3c3f 100644
---- a/wrbmp.c
-+++ b/wrbmp.c
-@@ -502,8 +502,9 @@ jinit_write_bmp(j_decompress_ptr cinfo, boolean is_os2,
-       dest->pub.put_pixel_rows = put_gray_rows;
-     else
-       dest->pub.put_pixel_rows = put_pixel_rows;
--  } else if (cinfo->out_color_space == JCS_RGB565 ||
--             cinfo->out_color_space == JCS_CMYK) {
-+  } else if (!cinfo->quantize_colors &&
-+             (cinfo->out_color_space == JCS_RGB565 ||
-+              cinfo->out_color_space == JCS_CMYK)) {
-     dest->pub.put_pixel_rows = put_pixel_rows;
-   } else {
-     ERREXIT(cinfo, JERR_BMP_COLORSPACE);
--- 
-2.20.1
-
diff --git a/buildroot/package/jpeg-turbo/jpeg-turbo.hash b/buildroot/package/jpeg-turbo/jpeg-turbo.hash
index 1779324c5..ea6060f2b 100644
--- a/buildroot/package/jpeg-turbo/jpeg-turbo.hash
+++ b/buildroot/package/jpeg-turbo/jpeg-turbo.hash
@@ -1,7 +1,7 @@
-# From https://sourceforge.net/projects/libjpeg-turbo/files/2.0.1/
-sha1 7ea4a288bccbb5a2d5bfad5fb328d4a839853f4e  libjpeg-turbo-2.0.1.tar.gz
-md5 1b05a66aa9b006fd04ed29f408e68f46  libjpeg-turbo-2.0.1.tar.gz
+# From https://sourceforge.net/projects/libjpeg-turbo/files/2.0.3/
+sha1 539363a444f92421c098a1a3e7cebfda48d4cfb3  libjpeg-turbo-2.0.3.tar.gz
+md5  bd07fddf26f9def7bab02739eb655116 libjpeg-turbo-2.0.3.tar.gz
 # Locally computed
-sha256 e5f86cec31df1d39596e0cca619ab1b01f99025a27dafdfc97a30f3a12f866ff  libjpeg-turbo-2.0.1.tar.gz
-sha256 8412238c5ad95965cf3c3197791e9dea8b5fae505d133449e33ee2fa754fe61e  LICENSE.md
+sha256 4246de500544d4ee408ee57048aa4aadc6f165fc17f141da87669f20ed3241b7  libjpeg-turbo-2.0.3.tar.gz
+sha256 69e570a251515ced17d4492256d57c89db77ed949652f88a44c80c1ca9607920  LICENSE.md
 sha256 82fece2bff2669c476495f0fe70096b154e8bc5b40916a64e99836d9a01c3110  README.ijg
diff --git a/buildroot/package/jpeg-turbo/jpeg-turbo.mk b/buildroot/package/jpeg-turbo/jpeg-turbo.mk
index b848b6689..0c75cf1db 100644
--- a/buildroot/package/jpeg-turbo/jpeg-turbo.mk
+++ b/buildroot/package/jpeg-turbo/jpeg-turbo.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-JPEG_TURBO_VERSION = 2.0.1
+JPEG_TURBO_VERSION = 2.0.3
 JPEG_TURBO_SOURCE = libjpeg-turbo-$(JPEG_TURBO_VERSION).tar.gz
 JPEG_TURBO_SITE = https://downloads.sourceforge.net/project/libjpeg-turbo/$(JPEG_TURBO_VERSION)
 JPEG_TURBO_LICENSE = IJG (libjpeg), BSD-3-Clause (TurboJPEG), Zlib (SIMD)
diff --git a/buildroot/package/json-glib/json-glib.mk b/buildroot/package/json-glib/json-glib.mk
index 77c0c4532..5c1fca3fd 100644
--- a/buildroot/package/json-glib/json-glib.mk
+++ b/buildroot/package/json-glib/json-glib.mk
@@ -17,4 +17,8 @@ JSON_GLIB_DEPENDENCIES = \
 	host-pkgconf \
 	libglib2
 
+JSON_GLIB_CONF_OPTS = -Dintrospection=false
+
+JSON_GLIB_LDFLAGS = $(TARGET_LDFLAGS) $(TARGET_NLS_LIBS)
+
 $(eval $(meson-package))
diff --git a/buildroot/package/kexec-lite/Config.in b/buildroot/package/kexec-lite/Config.in
index cd0e30f2d..3e84f90d5 100644
--- a/buildroot/package/kexec-lite/Config.in
+++ b/buildroot/package/kexec-lite/Config.in
@@ -15,6 +15,8 @@ config BR2_PACKAGE_KEXEC_LITE
 	  This package is a tiny implementation of the kexec userspace
 	  components, for devicetree-based platforms.
 
+	  https://github.com/antonblanchard/kexec-lite
+
 comment "kexec-lite needs a uClibc or glibc toolchain w/ wchar, dynamic library"
 	depends on BR2_powerpc || BR2_powerpc64
 	depends on BR2_STATIC_LIBS || !BR2_USE_WCHAR \
diff --git a/buildroot/package/kf5/Config.in b/buildroot/package/kf5/Config.in
index 2e50bce49..aecbb932f 100644
--- a/buildroot/package/kf5/Config.in
+++ b/buildroot/package/kf5/Config.in
@@ -6,6 +6,8 @@ menuconfig BR2_PACKAGE_KF5
 	  This option enables the KF5 KDE Frameworks. Sub-options
 	  allow to select which modules should be built.
 
+	  https://techbase.kde.org/KDE_Frameworks
+
 if BR2_PACKAGE_KF5
 source "package/kf5/kf5-extra-cmake-modules/Config.in"
 source "package/kf5/kf5-kcoreaddons/Config.in"
diff --git a/buildroot/package/kf5/kf5-extra-cmake-modules/kf5-extra-cmake-modules.mk b/buildroot/package/kf5/kf5-extra-cmake-modules/kf5-extra-cmake-modules.mk
index 7b96e1f1b..3c4281b96 100644
--- a/buildroot/package/kf5/kf5-extra-cmake-modules/kf5-extra-cmake-modules.mk
+++ b/buildroot/package/kf5/kf5-extra-cmake-modules/kf5-extra-cmake-modules.mk
@@ -8,7 +8,7 @@ KF5_EXTRA_CMAKE_MODULES_VERSION = $(KF5_VERSION)
 KF5_EXTRA_CMAKE_MODULES_SITE = $(KF5_SITE)
 KF5_EXTRA_CMAKE_MODULES_SOURCE = extra-cmake-modules-$(KF5_EXTRA_CMAKE_MODULES_VERSION).tar.xz
 KF5_EXTRA_CMAKE_MODULES_LICENSE = BSD-3-Clause
-KF5_EXTRA_CMAKE_MODULES_LICENSE_FILE = COPYING-CMAKE-SCRIPTS
+KF5_EXTRA_CMAKE_MODULES_LICENSE_FILES = COPYING-CMAKE-SCRIPTS
 
 KF5_EXTRA_CMAKE_MODULES_DEPENDENCIES = host-pkgconf
 KF5_EXTRA_CMAKE_MODULES_INSTALL_STAGING = YES
diff --git a/buildroot/package/kf5/kf5-kcoreaddons/kf5-kcoreaddons.mk b/buildroot/package/kf5/kf5-kcoreaddons/kf5-kcoreaddons.mk
index ea6aac4ec..76be8876c 100644
--- a/buildroot/package/kf5/kf5-kcoreaddons/kf5-kcoreaddons.mk
+++ b/buildroot/package/kf5/kf5-kcoreaddons/kf5-kcoreaddons.mk
@@ -14,10 +14,16 @@ KF5_KCOREADDONS_DEPENDENCIES = kf5-extra-cmake-modules qt5tools
 KF5_KCOREADDONS_INSTALL_STAGING = YES
 
 KF5_KCOREADDONS_CXXFLAGS = $(TARGET_CXXFLAGS)
-KF5_KCOREADDONS_CONF_OPTS = -DCMAKE_CXX_FLAGS="$(KF5_KCOREADDONS_CXXFLAGS)"
 
 ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
 KF5_KCOREADDONS_CXXFLAGS += -latomic
 endif
 
+KF5_KCOREADDONS_CONF_OPTS = -DCMAKE_CXX_FLAGS="$(KF5_KCOREADDONS_CXXFLAGS)"
+
+ifeq ($(BR2_microblaze),y)
+# Microblaze ld emits warnings, make warnings not to be treated as errors
+KF5_KCOREADDONS_CONF_OPTS += -DCMAKE_SHARED_LINKER_FLAGS="-Wl,--no-fatal-warnings"
+endif
+
 $(eval $(cmake-package))
diff --git a/buildroot/package/kf5/kf5-modemmanager-qt/kf5-modemmanager-qt.mk b/buildroot/package/kf5/kf5-modemmanager-qt/kf5-modemmanager-qt.mk
index 20fbc102c..2a782b35e 100644
--- a/buildroot/package/kf5/kf5-modemmanager-qt/kf5-modemmanager-qt.mk
+++ b/buildroot/package/kf5/kf5-modemmanager-qt/kf5-modemmanager-qt.mk
@@ -8,7 +8,7 @@ KF5_MODEMMANAGER_QT_VERSION = $(KF5_VERSION)
 KF5_MODEMMANAGER_QT_SITE = $(KF5_SITE)
 KF5_MODEMMANAGER_QT_SOURCE = modemmanager-qt-$(KF5_MODEMMANAGER_QT_VERSION).tar.xz
 KF5_MODEMMANAGER_QT_LICENSE = LGPL-2.1+
-KF5_MODEMMANAGER_QT_LICENSE_FILE = COPYING.LIB
+KF5_MODEMMANAGER_QT_LICENSE_FILES = COPYING.LIB
 
 KF5_MODEMMANAGER_QT_DEPENDENCIES = kf5-extra-cmake-modules modem-manager qt5base
 KF5_MODEMMANAGER_QT_INSTALL_STAGING = YES
diff --git a/buildroot/package/kf5/kf5-networkmanager-qt/kf5-networkmanager-qt.mk b/buildroot/package/kf5/kf5-networkmanager-qt/kf5-networkmanager-qt.mk
index 52e70e3c4..c383f98e9 100644
--- a/buildroot/package/kf5/kf5-networkmanager-qt/kf5-networkmanager-qt.mk
+++ b/buildroot/package/kf5/kf5-networkmanager-qt/kf5-networkmanager-qt.mk
@@ -8,7 +8,7 @@ KF5_NETWORKMANAGER_QT_VERSION = $(KF5_VERSION)
 KF5_NETWORKMANAGER_QT_SITE = $(KF5_SITE)
 KF5_NETWORKMANAGER_QT_SOURCE = networkmanager-qt-$(KF5_NETWORKMANAGER_QT_VERSION).tar.xz
 KF5_NETWORKMANAGER_QT_LICENSE = LGPL-2.1+
-KF5_NETWORKMANAGER_QT_LICENSE_FILE = COPYING.LIB
+KF5_NETWORKMANAGER_QT_LICENSE_FILES = COPYING.LIB
 
 KF5_NETWORKMANAGER_QT_DEPENDENCIES = kf5-extra-cmake-modules network-manager qt5base
 KF5_NETWORKMANAGER_QT_INSTALL_STAGING = YES
diff --git a/buildroot/package/kodi-jsonschemabuilder/kodi-jsonschemabuilder.mk b/buildroot/package/kodi-jsonschemabuilder/kodi-jsonschemabuilder.mk
index fcf4888a9..713d415fe 100644
--- a/buildroot/package/kodi-jsonschemabuilder/kodi-jsonschemabuilder.mk
+++ b/buildroot/package/kodi-jsonschemabuilder/kodi-jsonschemabuilder.mk
@@ -9,6 +9,7 @@
 KODI_JSONSCHEMABUILDER_VERSION = 17.6-Krypton
 KODI_JSONSCHEMABUILDER_SITE = $(call github,xbmc,xbmc,$(KODI_JSONSCHEMABUILDER_VERSION))
 KODI_JSONSCHEMABUILDER_SOURCE = kodi-$(KODI_JSONSCHEMABUILDER_VERSION).tar.gz
+KODI_JSONSCHEMABUILDER_DL_SUBDIR = kodi
 KODI_JSONSCHEMABUILDER_LICENSE = GPL-2.0
 KODI_JSONSCHEMABUILDER_LICENSE_FILES = LICENSE.GPL
 HOST_KODI_JSONSCHEMABUILDER_SUBDIR = tools/depends/native/JsonSchemaBuilder
diff --git a/buildroot/package/kodi-texturepacker/kodi-texturepacker.mk b/buildroot/package/kodi-texturepacker/kodi-texturepacker.mk
index 31e3580ae..bb35252b9 100644
--- a/buildroot/package/kodi-texturepacker/kodi-texturepacker.mk
+++ b/buildroot/package/kodi-texturepacker/kodi-texturepacker.mk
@@ -9,6 +9,7 @@
 KODI_TEXTUREPACKER_VERSION = 17.6-Krypton
 KODI_TEXTUREPACKER_SITE = $(call github,xbmc,xbmc,$(KODI_TEXTUREPACKER_VERSION))
 KODI_TEXTUREPACKER_SOURCE = kodi-$(KODI_TEXTUREPACKER_VERSION).tar.gz
+KODI_TEXTUREPACKER_DL_SUBDIR = kodi
 KODI_TEXTUREPACKER_LICENSE = GPL-2.0
 KODI_TEXTUREPACKER_LICENSE_FILES = LICENSE.GPL
 HOST_KODI_TEXTUREPACKER_SUBDIR = tools/depends/native/TexturePacker
diff --git a/buildroot/package/kodi/Config.in b/buildroot/package/kodi/Config.in
index 279b4ead0..28c56ac1b 100644
--- a/buildroot/package/kodi/Config.in
+++ b/buildroot/package/kodi/Config.in
@@ -81,12 +81,10 @@ menuconfig BR2_PACKAGE_KODI
 	select BR2_PACKAGE_PYTHON_BZIP2
 	select BR2_PACKAGE_PYTHON_CURSES
 	select BR2_PACKAGE_PYTHON_PYEXPAT
-	select BR2_PACKAGE_PYTHON_READLINE
 	select BR2_PACKAGE_PYTHON_SQLITE
 	select BR2_PACKAGE_PYTHON_SSL
 	select BR2_PACKAGE_PYTHON_UNICODEDATA
 	select BR2_PACKAGE_PYTHON_ZLIB
-	select BR2_PACKAGE_READLINE
 	select BR2_PACKAGE_SQLITE
 	select BR2_PACKAGE_TAGLIB
 	select BR2_PACKAGE_TINYXML
diff --git a/buildroot/package/kodi/kodi.hash b/buildroot/package/kodi/kodi.hash
index 8018c67a3..2b2e5e64f 100644
--- a/buildroot/package/kodi/kodi.hash
+++ b/buildroot/package/kodi/kodi.hash
@@ -8,3 +8,5 @@ sha256 b6eb2d929ff56cb051152c32010afc5e7cf5fe8c5ae32dca412a2b46b6b57e34  2f12236
 sha256 312b3d15bc448d24e92f4b2e7248409525eccc4e75776026d805478e51c5ef3d  981488f.tar.gz
 # Locally computed - libdvdread
 sha256 e7179b2054163652596a56301c9f025515cb08c6d6310b42b897c3ad11c0199b  17d99db.tar.gz
+# Locally computed
+sha256 89931c1fb1f3716694175763cf3221cfcd63d6935031cf6b4512d17ffe5d9860  LICENSE.GPL
diff --git a/buildroot/package/kodi/kodi.mk b/buildroot/package/kodi/kodi.mk
index 590af15b7..3ba89abcc 100644
--- a/buildroot/package/kodi/kodi.mk
+++ b/buildroot/package/kodi/kodi.mk
@@ -19,6 +19,7 @@ KODI_DEPENDENCIES = \
 	freetype \
 	gnutls \
 	host-gawk \
+	host-gettext \
 	host-gperf \
 	host-kodi-jsonschemabuilder \
 	host-kodi-texturepacker \
@@ -38,7 +39,6 @@ KODI_DEPENDENCIES = \
 	openssl \
 	pcre \
 	python \
-	readline \
 	sqlite \
 	taglib \
 	tinyxml \
diff --git a/buildroot/package/kvm-unit-tests/kvm-unit-tests.mk b/buildroot/package/kvm-unit-tests/kvm-unit-tests.mk
index 92d67fb34..263706670 100644
--- a/buildroot/package/kvm-unit-tests/kvm-unit-tests.mk
+++ b/buildroot/package/kvm-unit-tests/kvm-unit-tests.mk
@@ -35,7 +35,13 @@ KVM_UNIT_TESTS_CONF_OPTS =\
 # compiler. However, for x86-64, we use the host compiler, as
 # kvm-unit-tests builds 32 bit code, which Buildroot toolchains for
 # x86-64 cannot do.
-ifneq ($(BR2_x86_64),y)
+ifeq ($(BR2_x86_64),y)
+# Arch Linux adds -fstack-protector even when building with -ffreestanding, but
+# it doesn't link with the stack-protector library when -nostdlib is passed,
+# which leads to a link error. Therefore, disable it explicitly to work around
+# this bug in Arch Linux. https://bugs.archlinux.org/task/64270
+KVM_UNIT_TESTS_MAKE_OPTS += EXTRA_CFLAGS=-fno-stack-protector
+else
 KVM_UNIT_TESTS_CONF_OPTS += --cross-prefix="$(TARGET_CROSS)"
 endif
 
@@ -44,11 +50,12 @@ define KVM_UNIT_TESTS_CONFIGURE_CMDS
 endef
 
 define KVM_UNIT_TESTS_BUILD_CMDS
-	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) standalone
+	$(TARGET_MAKE_ENV) $(MAKE) $(KVM_UNIT_TESTS_MAKE_OPTS) -C $(@D) \
+		standalone
 endef
 
 define KVM_UNIT_TESTS_INSTALL_TARGET_CMDS
-	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \
+	$(TARGET_MAKE_ENV) $(MAKE) $(KVM_UNIT_TESTS_MAKE_OPTS) -C $(@D) \
 		DESTDIR=$(TARGET_DIR)/usr/share/kvm-unit-tests/ \
 		install
 endef
diff --git a/buildroot/package/leafnode2/Config.in b/buildroot/package/leafnode2/Config.in
index 93d3090a0..e244bdc45 100644
--- a/buildroot/package/leafnode2/Config.in
+++ b/buildroot/package/leafnode2/Config.in
@@ -9,9 +9,9 @@ config BR2_PACKAGE_LEAFNODE2
 
 	  Leafnode-2 needs inetd, check chapter 14 of the documentation
 	  at:
-	  http://www.dt.e-technik.uni-dortmund.de/~ma/leafnode/beta/leafnode-readme.txt
+	  http://krusty.dt.e-technik.tu-dortmund.de/~ma/leafnode/beta/leafnode-readme.txt
 
 	  For example, you can add this line to inetd.conf:
 	  nntp    stream  tcp     nowait  news    /usr/sbin/leafnode
 
-	  http://www.dt.e-technik.tu-dortmund.de/~ma/leafnode/beta
+	  http://krusty.dt.e-technik.tu-dortmund.de/~ma/leafnode/beta
diff --git a/buildroot/package/lftp/lftp.mk b/buildroot/package/lftp/lftp.mk
index 93a0bf5c3..b8a2b2430 100644
--- a/buildroot/package/lftp/lftp.mk
+++ b/buildroot/package/lftp/lftp.mk
@@ -25,6 +25,9 @@ endif
 
 ifeq ($(BR2_PACKAGE_EXPAT)$(BR2_PACKAGE_LFTP_PROTO_HTTP),yy)
 LFTP_DEPENDENCIES += expat
+LFTP_CONF_OPTS += --with-expat=$(STAGING_DIR)/usr
+else
+LFTP_CONF_OPTS += --without-expat
 endif
 
 ifeq ($(BR2_PACKAGE_GNUTLS),y)
diff --git a/buildroot/package/libarchive/0007-RAR-reader-fix-use-after-free.patch b/buildroot/package/libarchive/0007-RAR-reader-fix-use-after-free.patch
new file mode 100644
index 000000000..5acbb77e9
--- /dev/null
+++ b/buildroot/package/libarchive/0007-RAR-reader-fix-use-after-free.patch
@@ -0,0 +1,36 @@
+From b8592ecba2f9e451e1f5cb7ab6dcee8b8e7b3f60 Mon Sep 17 00:00:00 2001
+From: Martin Matuska 
+Date: Sat, 11 May 2019 02:36:53 +0200
+Subject: [PATCH] RAR reader: fix use after free
+
+If read_data_compressed() returns ARCHIVE_FAILED, the caller is allowed
+to continue with next archive headers. We need to set rar->start_new_table
+after the ppmd7_context got freed, otherwise it won't be allocated again.
+
+Reported by: OSS-Fuzz issue 2582
+
+[Peter: fixes CVE-2019-18408]
+Signed-off-by: Peter Korsgaard 
+---
+ libarchive/archive_read_support_format_rar.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/libarchive/archive_read_support_format_rar.c b/libarchive/archive_read_support_format_rar.c
+index a8cc5c94..49360876 100644
+--- a/libarchive/archive_read_support_format_rar.c
++++ b/libarchive/archive_read_support_format_rar.c
+@@ -1024,8 +1024,10 @@ archive_read_format_rar_read_data(struct archive_read *a, const void **buff,
+   case COMPRESS_METHOD_GOOD:
+   case COMPRESS_METHOD_BEST:
+     ret = read_data_compressed(a, buff, size, offset);
+-    if (ret != ARCHIVE_OK && ret != ARCHIVE_WARN)
++    if (ret != ARCHIVE_OK && ret != ARCHIVE_WARN) {
+       __archive_ppmd7_functions.Ppmd7_Free(&rar->ppmd7_context);
++      rar->start_new_table = 1;
++    }
+     break;
+ 
+   default:
+-- 
+2.20.1
+
diff --git a/buildroot/package/libarchive/0008-Bugfix-and-optimize-archive_wstring_append_from_mbs.patch b/buildroot/package/libarchive/0008-Bugfix-and-optimize-archive_wstring_append_from_mbs.patch
new file mode 100644
index 000000000..a047e26c0
--- /dev/null
+++ b/buildroot/package/libarchive/0008-Bugfix-and-optimize-archive_wstring_append_from_mbs.patch
@@ -0,0 +1,103 @@
+From 22b1db9d46654afc6f0c28f90af8cdc84a199f41 Mon Sep 17 00:00:00 2001
+From: Martin Matuska 
+Date: Thu, 21 Nov 2019 03:08:40 +0100
+Subject: [PATCH] Bugfix and optimize archive_wstring_append_from_mbs()
+
+The cal to mbrtowc() or mbtowc() should read up to mbs_length
+bytes and not wcs_length. This avoids out-of-bounds reads.
+
+mbrtowc() and mbtowc() return (size_t)-1 wit errno EILSEQ when
+they encounter an invalid multibyte character and (size_t)-2 when
+they they encounter an incomplete multibyte character. As we return
+failure and all our callers error out it makes no sense to continue
+parsing mbs.
+
+As we allocate `len` wchars at the beginning and each wchar has
+at least one byte, there will never be need to grow the buffer,
+so the code can be left out. On the other hand, we are always
+allocatng more memory than we need.
+
+As long as wcs_length == mbs_length == len we can omit wcs_length.
+We keep the old code commented if we decide to save memory and
+use autoexpanding wcs_length in the future.
+
+Fixes #1276
+
+Signed-off-by: Peter Korsgaard 
+[Peter: fixes CVE-2019-19221]
+---
+ libarchive/archive_string.c | 28 +++++++++++++++++-----------
+ 1 file changed, 17 insertions(+), 11 deletions(-)
+
+diff --git a/libarchive/archive_string.c b/libarchive/archive_string.c
+index 979a418b..bd39c96f 100644
+--- a/libarchive/archive_string.c
++++ b/libarchive/archive_string.c
+@@ -591,7 +591,7 @@ archive_wstring_append_from_mbs(struct archive_wstring *dest,
+ 	 * No single byte will be more than one wide character,
+ 	 * so this length estimate will always be big enough.
+ 	 */
+-	size_t wcs_length = len;
++	// size_t wcs_length = len;
+ 	size_t mbs_length = len;
+ 	const char *mbs = p;
+ 	wchar_t *wcs;
+@@ -600,7 +600,11 @@ archive_wstring_append_from_mbs(struct archive_wstring *dest,
+ 
+ 	memset(&shift_state, 0, sizeof(shift_state));
+ #endif
+-	if (NULL == archive_wstring_ensure(dest, dest->length + wcs_length + 1))
++	/*
++	 * As we decided to have wcs_length == mbs_length == len
++	 * we can use len here instead of wcs_length
++	 */
++	if (NULL == archive_wstring_ensure(dest, dest->length + len + 1))
+ 		return (-1);
+ 	wcs = dest->s + dest->length;
+ 	/*
+@@ -609,6 +613,12 @@ archive_wstring_append_from_mbs(struct archive_wstring *dest,
+ 	 * multi bytes.
+ 	 */
+ 	while (*mbs && mbs_length > 0) {
++		/*
++		 * The buffer we allocated is always big enough.
++		 * Keep this code path in a comment if we decide to choose
++		 * smaller wcs_length in the future
++		 */
++/*
+ 		if (wcs_length == 0) {
+ 			dest->length = wcs - dest->s;
+ 			dest->s[dest->length] = L'\0';
+@@ -618,24 +628,20 @@ archive_wstring_append_from_mbs(struct archive_wstring *dest,
+ 				return (-1);
+ 			wcs = dest->s + dest->length;
+ 		}
++*/
+ #if HAVE_MBRTOWC
+-		r = mbrtowc(wcs, mbs, wcs_length, &shift_state);
++		r = mbrtowc(wcs, mbs, mbs_length, &shift_state);
+ #else
+-		r = mbtowc(wcs, mbs, wcs_length);
++		r = mbtowc(wcs, mbs, mbs_length);
+ #endif
+ 		if (r == (size_t)-1 || r == (size_t)-2) {
+ 			ret_val = -1;
+-			if (errno == EILSEQ) {
+-				++mbs;
+-				--mbs_length;
+-				continue;
+-			} else
+-				break;
++			break;
+ 		}
+ 		if (r == 0 || r > mbs_length)
+ 			break;
+ 		wcs++;
+-		wcs_length--;
++		// wcs_length--;
+ 		mbs += r;
+ 		mbs_length -= r;
+ 	}
+-- 
+2.20.1
+
diff --git a/buildroot/package/libass/Config.in b/buildroot/package/libass/Config.in
index 769068518..c654d8212 100644
--- a/buildroot/package/libass/Config.in
+++ b/buildroot/package/libass/Config.in
@@ -6,4 +6,4 @@ config BR2_PACKAGE_LIBASS
 	  libass is a portable subtitle renderer for the ASS/SSA
 	  (Advanced Substation Alpha/Substation Alpha) subtitle format
 
-	  http://code.google.com/p/libass/
+	  https://github.com/libass/libass
diff --git a/buildroot/package/libbsd/0001-flopen-fix-build-with-musl-libc.patch b/buildroot/package/libbsd/0001-flopen-fix-build-with-musl-libc.patch
deleted file mode 100644
index 6f0aeffed..000000000
--- a/buildroot/package/libbsd/0001-flopen-fix-build-with-musl-libc.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 8575450b9c1226fc38196b29e33c67f2b58cacf5 Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Tue, 5 Jun 2018 19:18:47 +0300
-Subject: [PATCH] flopen: fix build with musl libc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 993828d84ee (Add flopenat() function from FreeBSD) dropped the
-fcntl.h header. This breaks the build with musl libc:
-
-flopen.c: In function ‘vflopenat’:
-flopen.c:60:14: error: ‘O_CREAT’ undeclared (first use in this function)
-  if (flags & O_CREAT) {
-              ^~~~~~~
-
-Restore the fcntl.h header include to fix the build.
-
-Signed-off-by: Baruch Siach 
----
-Upstream status: sent to libbsd@lists.freedesktop.org
-
- src/flopen.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/src/flopen.c b/src/flopen.c
-index b9972c94ec90..ff20d074445b 100644
---- a/src/flopen.c
-+++ b/src/flopen.c
-@@ -32,6 +32,7 @@
- #include 
- 
- #include 
-+#include 
- #include 
- #include 
- 
--- 
-2.17.1
-
diff --git a/buildroot/package/libbsd/Config.in b/buildroot/package/libbsd/Config.in
index 0f320302b..a163ce9b6 100644
--- a/buildroot/package/libbsd/Config.in
+++ b/buildroot/package/libbsd/Config.in
@@ -5,8 +5,6 @@ config BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS
 	depends on !BR2_microblaze
 	depends on !BR2_arc
 	depends on !BR2_xtensa
-	# uClibc on noMMU doesn't provide __register_atfork()
-	depends on !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)
 
 config BR2_PACKAGE_LIBBSD
 	bool "libbsd"
diff --git a/buildroot/package/libbsd/libbsd.hash b/buildroot/package/libbsd/libbsd.hash
index 93af3944a..95887bd60 100644
--- a/buildroot/package/libbsd/libbsd.hash
+++ b/buildroot/package/libbsd/libbsd.hash
@@ -1,3 +1,3 @@
-# From https://lists.freedesktop.org/archives/libbsd/2018-May/000190.html
-sha256	56d835742327d69faccd16955a60b6dcf30684a8da518c4eca0ac713b9e0a7a4	libbsd-0.9.1.tar.xz
-sha256	df6d8e1b5b3a5b06376c658c8ad3afc82687f1c0e0404cec4738ad14b2675708	COPYING
+# From https://lists.freedesktop.org/archives/libbsd/2019-August/000229.html
+sha256	34b8adc726883d0e85b3118fa13605e179a62b31ba51f676136ecb2d0bc1a887	libbsd-0.10.0.tar.xz
+sha256	933d14a6bc89ee1fd7adbf5b6ec97f6ff0e002549d0b0c164f8a8895371d78f8	COPYING
diff --git a/buildroot/package/libbsd/libbsd.mk b/buildroot/package/libbsd/libbsd.mk
index 2d78b8c5f..27bac6838 100644
--- a/buildroot/package/libbsd/libbsd.mk
+++ b/buildroot/package/libbsd/libbsd.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-LIBBSD_VERSION = 0.9.1
+LIBBSD_VERSION = 0.10.0
 LIBBSD_SOURCE = libbsd-$(LIBBSD_VERSION).tar.xz
-LIBBSD_SITE = https://archive.hadrons.org/software/libbsd
+LIBBSD_SITE = https://libbsd.freedesktop.org/releases
 LIBBSD_LICENSE = BSD-2-Clause, BSD-3-Clause, BSD-4-Clause, BSD-5-Clause, \
 		MIT, ISC, Beerware
 LIBBSD_LICENSE_FILES = COPYING
diff --git a/buildroot/package/libbson/Config.in b/buildroot/package/libbson/Config.in
index 4305ca903..95f224e29 100644
--- a/buildroot/package/libbson/Config.in
+++ b/buildroot/package/libbson/Config.in
@@ -5,5 +5,7 @@ config BR2_PACKAGE_LIBBSON
 	  libbson is a library providing useful routines related to
 	  building, parsing, and iterating BSON documents.
 
+	  http://mongoc.org/libbson/
+
 comment "libbson needs a toolchain w/ threads"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch b/buildroot/package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch
new file mode 100644
index 000000000..ab2296c04
--- /dev/null
+++ b/buildroot/package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch
@@ -0,0 +1,43 @@
+From 9c2873b1d9292bcf43c862b6777d41c40521424c Mon Sep 17 00:00:00 2001
+From: Peter Seiderer 
+Date: Sun, 13 Jan 2019 22:27:42 +0100
+Subject: [PATCH] libcdaudio: enable autoreconf
+
+Fixes the following two autoreconf errors (by simple removing of the
+two offending lines):
+
+  configure.ac:20: error: automatic de-ANSI-fication support has been removed
+
+  Makefile.am:2: error: automatic de-ANSI-fication support has been removed
+
+Signed-off-by: Peter Seiderer 
+---
+ Makefile.am  | 1 -
+ configure.ac | 1 -
+ 2 files changed, 2 deletions(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index f639dd8..a32cfe6 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -1,5 +1,4 @@
+ ## Process this file with automake to produce Makefile.in
+-AUTOMAKE_OPTIONS = ansi2knr
+ SUBDIRS = src
+ 
+ bin_SCRIPTS = libcdaudio-config
+diff --git a/configure.ac b/configure.ac
+index bbdd42d..6699ceb 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -17,7 +17,6 @@ AM_CONFIG_HEADER(config.h)
+ AC_PROG_AWK
+ AC_PROG_CC
+ AC_PROG_CPP
+-AM_C_PROTOTYPES
+ AM_PROG_CC_STDC
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
+-- 
+2.20.1
+
diff --git a/buildroot/package/libcdaudio/libcdaudio.mk b/buildroot/package/libcdaudio/libcdaudio.mk
index 5d421eba7..651289d7e 100644
--- a/buildroot/package/libcdaudio/libcdaudio.mk
+++ b/buildroot/package/libcdaudio/libcdaudio.mk
@@ -11,4 +11,7 @@ LIBCDAUDIO_CONFIG_SCRIPTS = libcdaudio-config
 LIBCDAUDIO_LICENSE = GPL-2.0+
 LIBCDAUDIO_LICENSE_FILES = COPYING
 
+# fix configure failure when the toolchain doesn't have C++ support
+LIBCDAUDIO_AUTORECONF = YES
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/libcurl/libcurl.hash b/buildroot/package/libcurl/libcurl.hash
index f5e90e0aa..8f2d0c058 100644
--- a/buildroot/package/libcurl/libcurl.hash
+++ b/buildroot/package/libcurl/libcurl.hash
@@ -1,5 +1,5 @@
 # Locally calculated after checking pgp signature
-# https://curl.haxx.se/download/curl-7.65.1.tar.xz.asc
+# https://curl.haxx.se/download/curl-7.66.0.tar.xz.asc
 # with key 27EDEAF22F3ABCEB50DB9A125CC908FDB71E12C2
-sha256 f6c22074877f235aebc7c53057dbc7ee82358f8ae58bfb767e955c18c859a77a  curl-7.65.1.tar.xz
+sha256 dbb48088193016d079b97c5c3efde8efa56ada2ebf336e8a97d04eb8e2ed98c1  curl-7.66.0.tar.xz
 sha256 8c8824f50e73a021f5dde1fccbf69685939247399a33a32abab1fa448c9ddabb  COPYING
diff --git a/buildroot/package/libcurl/libcurl.mk b/buildroot/package/libcurl/libcurl.mk
index abf7c0bf5..e78049cdc 100644
--- a/buildroot/package/libcurl/libcurl.mk
+++ b/buildroot/package/libcurl/libcurl.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBCURL_VERSION = 7.65.1
+LIBCURL_VERSION = 7.66.0
 LIBCURL_SOURCE = curl-$(LIBCURL_VERSION).tar.xz
 LIBCURL_SITE = https://curl.haxx.se/download
 LIBCURL_DEPENDENCIES = host-pkgconf \
diff --git a/buildroot/package/libdnet/libdnet.mk b/buildroot/package/libdnet/libdnet.mk
index 00d9c4fd4..d1cc0bf15 100644
--- a/buildroot/package/libdnet/libdnet.mk
+++ b/buildroot/package/libdnet/libdnet.mk
@@ -13,6 +13,7 @@ LIBDNET_AUTORECONF = YES
 LIBDNET_CONF_OPTS = \
 	--with-gnu-ld \
 	--with-check=no
+LIBDNET_CONFIG_SCRIPTS = dnet-config
 
 ifneq ($(BR2_PACKAGE_LIBDNET_PYTHON),)
 LIBDNET_DEPENDENCIES = python
diff --git a/buildroot/package/libdvdnav/Config.in b/buildroot/package/libdvdnav/Config.in
index 8cfcb4a6d..77cba5f13 100644
--- a/buildroot/package/libdvdnav/Config.in
+++ b/buildroot/package/libdvdnav/Config.in
@@ -7,7 +7,7 @@ config BR2_PACKAGE_LIBDVDNAV
 	  DVD navigation features such as DVD menus, multiangle
 	  playback and even interactive DVD games.
 
-	  http://www.mplayerhq.hu
+	  https://www.videolan.org/developers/libdvdnav.html
 
 comment "libdvdnav needs a toolchain w/ threads"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/libdvdread/Config.in b/buildroot/package/libdvdread/Config.in
index 91bec83a4..357905415 100644
--- a/buildroot/package/libdvdread/Config.in
+++ b/buildroot/package/libdvdread/Config.in
@@ -5,4 +5,4 @@ config BR2_PACKAGE_LIBDVDREAD
 	  libdvdread provides a simple foundation for reading
 	  DVD-Video images.
 
-	  http://www.mplayerhq.hu/MPlayer/releases/dvdnav/
+	  https://www.videolan.org/developers/libdvdnav.html
diff --git a/buildroot/package/liberation/Config.in b/buildroot/package/liberation/Config.in
index b68166f63..8d6b3e78d 100644
--- a/buildroot/package/liberation/Config.in
+++ b/buildroot/package/liberation/Config.in
@@ -5,6 +5,8 @@ config BR2_PACKAGE_LIBERATION
 	  three most commonly used fonts on Microsoft systems:
 	  Times New Roman, Arial, and Courier New.
 
+	  https://github.com/liberationfonts/liberation-fonts
+
 if BR2_PACKAGE_LIBERATION
 
 config BR2_PACKAGE_LIBERATION_MONO
diff --git a/buildroot/package/libftdi/libftdi.hash b/buildroot/package/libftdi/libftdi.hash
index 5d9f8765d..8271ab277 100644
--- a/buildroot/package/libftdi/libftdi.hash
+++ b/buildroot/package/libftdi/libftdi.hash
@@ -1,2 +1,7 @@
 # Locally computed (after checking the signature from http://www.intra2net.com/en/developer/libftdi/download.php)
 sha256  3176d5b5986438f33f5208e690a8bfe90941be501cc0a72118ce3d338d4b838e  libftdi-0.20.tar.gz
+
+# Hash for license files:
+sha256  6bd354f4b9beca001b1b5395be48cef1d749a3ed27dddb8114bf09eb0ab2d88c  LICENSE
+sha256  ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6  COPYING.GPL
+sha256  c340cbee4974bb96019e782f2279df016c92fb1e7f5299347e779d9acedbb991  COPYING.LIB
diff --git a/buildroot/package/libftdi/libftdi.mk b/buildroot/package/libftdi/libftdi.mk
index cdd77c2e6..257342622 100644
--- a/buildroot/package/libftdi/libftdi.mk
+++ b/buildroot/package/libftdi/libftdi.mk
@@ -6,6 +6,8 @@
 
 LIBFTDI_VERSION = 0.20
 LIBFTDI_SITE = http://www.intra2net.com/en/developer/libftdi/download
+LIBFTDI_LICENSE = LGPL-2.1 (libftdi)
+LIBFTDI_LICENSE_FILES = LICENSE COPYING.LIB
 LIBFTDI_DEPENDENCIES = libusb-compat libusb
 HOST_LIBFTDI_DEPENDENCIES = host-libusb-compat host-libusb
 LIBFTDI_INSTALL_STAGING = YES
@@ -16,6 +18,8 @@ LIBFTDI_CONF_OPTS = --without-examples
 
 # configure detect it automaticaly so we need to force it
 ifeq ($(BR2_PACKAGE_LIBFTDI_CPP),y)
+LIBFTDI_LICENSE += , GPL-2.0 with exception (ftdipp)
+LIBFTDI_LICENSE_FILES += COPYING.GPL
 LIBFTDI_DEPENDENCIES += boost
 LIBFTDI_CONF_OPTS += --enable-libftdipp
 else
diff --git a/buildroot/package/libftdi1/libftdi1.mk b/buildroot/package/libftdi1/libftdi1.mk
index 014dd8401..9c3bafdbc 100644
--- a/buildroot/package/libftdi1/libftdi1.mk
+++ b/buildroot/package/libftdi1/libftdi1.mk
@@ -9,12 +9,14 @@ LIBFTDI1_SOURCE = libftdi1-$(LIBFTDI1_VERSION).tar.bz2
 LIBFTDI1_SITE = http://www.intra2net.com/en/developer/libftdi/download
 LIBFTDI1_INSTALL_STAGING = YES
 LIBFTDI1_DEPENDENCIES = libusb
-LIBFTDI1_LICENSE = LGPL-2.0 (libftdi1), GPL-2.0 with exception (ftdipp1)
-LIBFTDI1_LICENSE_FILES = LICENSE COPYING.GPL COPYING.LIB
+LIBFTDI1_LICENSE = LGPL-2.1 (libftdi1), MIT (libftdi1)
+LIBFTDI1_LICENSE_FILES = LICENSE COPYING.LIB
 LIBFTDI1_CONFIG_SCRIPTS = libftdi1-config
 LIBFTDI1_CONF_OPTS = -DDOCUMENTATION=OFF -DEXAMPLES=OFF
 
 ifeq ($(BR2_PACKAGE_LIBFTDI1_LIBFTDIPP1),y)
+LIBFTDI1_LICENSE += , GPL-2.0 with exception (libftdipp1)
+LIBFTDI1_LICENSE_FILES += COPYING.GPL
 LIBFTDI1_DEPENDENCIES += boost
 LIBFTDI1_CONF_OPTS += -DFTDIPP=ON
 else
@@ -30,6 +32,8 @@ endif
 
 ifeq ($(BR2_PACKAGE_LIBFTDI1_FDTI_EEPROM),y)
 # ftdi_eeprom optionally depends on libintl
+LIBFTDI1_LICENSE += , GPL-2.0 (ftdi_eeprom)
+LIBFTDI1_LICENSE_FILES += COPYING.GPL
 LIBFTDI1_DEPENDENCIES += libconfuse $(TARGET_NLS_DEPENDENCIES)
 LIBFTDI1_CONF_OPTS += -DFTDI_EEPROM=ON
 else
diff --git a/buildroot/package/libgcrypt/0001-build-Don-t-default-to-underscore-yes-for-cross-buil.patch b/buildroot/package/libgcrypt/0001-build-Don-t-default-to-underscore-yes-for-cross-buil.patch
new file mode 100644
index 000000000..032cb7c84
--- /dev/null
+++ b/buildroot/package/libgcrypt/0001-build-Don-t-default-to-underscore-yes-for-cross-buil.patch
@@ -0,0 +1,48 @@
+From 7fec3ac22efb86fce90a9edc5696e16ee88a65c7 Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka 
+Date: Wed, 24 Oct 2018 14:29:45 +0900
+Subject: [PATCH] build: Don't default to underscore=yes for cross-build.
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+* acinclude.m4: Don't set ac_cv_sys_symbol_underscore
+for cross build.
+
+--
+
+It made sense in the past when cross compile were basically for a.out
+system, but nowadays, it's better not to assume that.
+
+Fetched from: 0f4545b441b6fbdd6e9c4e95f5f2a367483e78ad
+
+Signed-off-by: NIIBE Yutaka 
+Signed-off-by: Jörg Krause 
+---
+ acinclude.m4 | 8 ++------
+ 1 file changed, 2 insertions(+), 6 deletions(-)
+
+diff --git a/acinclude.m4 b/acinclude.m4
+index fc208c53..6f7789d0 100644
+--- a/acinclude.m4
++++ b/acinclude.m4
+@@ -111,14 +111,10 @@ case "${host}" in
+         ac_cv_sys_symbol_underscore=yes
+         ;;
+     *)
+-      if test "$cross_compiling" = yes; then
+-        if test "x$ac_cv_sys_symbol_underscore" = x ; then
+-           ac_cv_sys_symbol_underscore=yes
+-        fi
+-      else
++      if test "$cross_compiling" != yes; then
+          tmp_do_check="yes"
+       fi
+-       ;;
++      ;;
+ esac
+ if test "$tmp_do_check" = "yes"; then
+   AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])
+-- 
+2.22.0
+
diff --git a/buildroot/package/libgcrypt/0001-reconfigure.patch b/buildroot/package/libgcrypt/0001-reconfigure.patch
deleted file mode 100644
index 87d29a298..000000000
--- a/buildroot/package/libgcrypt/0001-reconfigure.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff --git a/configure b/configure
-index 70a6d50..8f55d95 100755
---- a/configure
-+++ b/configure
-@@ -22306,14 +22306,15 @@ case "${host}" in
-     i386-emx-os2 | i345686-pc-os2*emx | i386-pc-msdosdjgpp)
-         ac_cv_sys_symbol_underscore=yes
-         ;;
--    *)
--      if test "$cross_compiling" = yes; then
--        if test "x$ac_cv_sys_symbol_underscore" = x ; then
--           ac_cv_sys_symbol_underscore=yes
-+    *)if test -z "$ac_cv_sys_symbol_underscore";then
-+        if test "$cross_compiling" = yes; then
-+            if test "x$ac_cv_sys_symbol_underscore" = x ; then
-+                ac_cv_sys_symbol_underscore=yes
-+            fi
-+        else
-+            tmp_do_check="yes"
-+        fi
-         fi
--      else
--         tmp_do_check="yes"
--      fi
-        ;;
- esac
- if test "$tmp_do_check" = "yes"; then
diff --git a/buildroot/package/libgcrypt/0002-configure.ac-add-an-option-to-disable-tests.patch b/buildroot/package/libgcrypt/0002-configure.ac-add-an-option-to-disable-tests.patch
new file mode 100644
index 000000000..21ff20a47
--- /dev/null
+++ b/buildroot/package/libgcrypt/0002-configure.ac-add-an-option-to-disable-tests.patch
@@ -0,0 +1,66 @@
+From 7fe1b8a53cc8c865c2a10dcd8f6cb4e51ccc6300 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Mon, 29 Jul 2019 12:19:10 +0200
+Subject: [PATCH] configure.ac: add an option to disable tests
+
+Add an option to allow the user to disable tests, this can be useful for
+example when the toolchain does not provide thread. Indeed, in this
+case, libgcrypt fails to build t-lock:
+
+t-lock.c: In function 'run_test':
+t-lock.c:359:3: error: unknown type name 'pthread_t'
+   pthread_t rthread;
+
+Fixes:
+ - http://autobuild.buildroot.org/results/50a8ba572e3fafd3c6a39bd54bcfcaf78b5ad325
+
+Signed-off-by: Fabrice Fontaine 
+---
+ Makefile.am  |  7 ++++++-
+ configure.ac | 10 ++++++++++
+ 2 files changed, 16 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile.am b/Makefile.am
+index 7fa4fa4d..f0bd90e4 100644
+--- a/Makefile.am
++++ b/Makefile.am
+@@ -39,9 +39,14 @@ else
+ doc =
+ endif
+ 
++if BUILD_TESTS
++tests = tests
++else
++tests =
++endif
+ 
+ DIST_SUBDIRS = m4 compat mpi cipher random src doc tests
+-SUBDIRS =         compat mpi cipher random src $(doc) tests
++SUBDIRS =         compat mpi cipher random src $(doc) $(tests)
+ 
+ EXTRA_DIST = autogen.sh autogen.rc README.GIT LICENSES      	           \
+              ChangeLog-2011 build-aux/ChangeLog-2011 doc/ChangeLog-2011    \
+diff --git a/configure.ac b/configure.ac
+index e8c8cd39..1a6b61e5 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -2710,6 +2710,16 @@ AC_ARG_ENABLE([doc], AC_HELP_STRING([--disable-doc],
+ AM_CONDITIONAL([BUILD_DOC], [test "x$build_doc" != xno])
+ 
+ 
++#
++# Option to disable building of tests
++#
++build_tests=yes
++AC_ARG_ENABLE([tests], AC_HELP_STRING([--disable-tests],
++                                      [do not build tests]),
++                       build_tests=$enableval, build_tests=yes)
++AM_CONDITIONAL([BUILD_TESTS], [test "x$build_tests" != xno])
++
++
+ #
+ # Provide information about the build.
+ #
+-- 
+2.20.1
+
diff --git a/buildroot/package/libgcrypt/libgcrypt.hash b/buildroot/package/libgcrypt/libgcrypt.hash
index 000f26dd2..580bdf331 100644
--- a/buildroot/package/libgcrypt/libgcrypt.hash
+++ b/buildroot/package/libgcrypt/libgcrypt.hash
@@ -1,7 +1,7 @@
-# From https://lists.gnupg.org/pipermail/gnupg-announce/2018q4/000431.html
-sha1 4a8ef9db6922f3a31992aca5640b4198a69b58fc  libgcrypt-1.8.4.tar.bz2
+# From https://lists.gnupg.org/pipermail/gnupg-announce/2019q3/000440.html
+sha1 2d8781e92f88706707a1e76fb628b499ad538a30  libgcrypt-1.8.5.tar.bz2
 # Locally calculated after checking signature
-# https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.4.tar.bz2.sig
+# https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.5.tar.bz2.sig
 # using key D8692123C4065DEA5E0F3AB5249B39D24F25E3B6
-sha256  f638143a0672628fde0cad745e9b14deb85dffb175709cacc1f4fe24b93f2227  libgcrypt-1.8.4.tar.bz2
+sha256  3b4a2a94cb637eff5bdebbcaf46f4d95c4f25206f459809339cdada0eb577ac3  libgcrypt-1.8.5.tar.bz2
 sha256  ca0061fc1381a3ab242310e4b3f56389f28e3d460eb2fd822ed7a21c6f030532  COPYING.LIB
diff --git a/buildroot/package/libgcrypt/libgcrypt.mk b/buildroot/package/libgcrypt/libgcrypt.mk
index 452cf17ce..d21513bd3 100644
--- a/buildroot/package/libgcrypt/libgcrypt.mk
+++ b/buildroot/package/libgcrypt/libgcrypt.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBGCRYPT_VERSION = 1.8.4
+LIBGCRYPT_VERSION = 1.8.5
 LIBGCRYPT_SOURCE = libgcrypt-$(LIBGCRYPT_VERSION).tar.bz2
 LIBGCRYPT_LICENSE = LGPL-2.1+
 LIBGCRYPT_LICENSE_FILES = COPYING.LIB
@@ -13,9 +13,11 @@ LIBGCRYPT_INSTALL_STAGING = YES
 LIBGCRYPT_DEPENDENCIES = libgpg-error
 LIBGCRYPT_CONFIG_SCRIPTS = libgcrypt-config
 
-LIBGCRYPT_CONF_ENV = \
-	ac_cv_sys_symbol_underscore=no
+# Patching acinclude.m4 in 0001
+# Patching configure.ac and Makefile.am in 0002
+LIBGCRYPT_AUTORECONF = YES
 LIBGCRYPT_CONF_OPTS = \
+	--disable-tests \
 	--with-gpg-error-prefix=$(STAGING_DIR)/usr
 
 # Libgcrypt doesn't support assembly for coldfire
diff --git a/buildroot/package/libgit2/libgit2.hash b/buildroot/package/libgit2/libgit2.hash
index 41ab87bf4..8b3d57ead 100644
--- a/buildroot/package/libgit2/libgit2.hash
+++ b/buildroot/package/libgit2/libgit2.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256	0b7ca31cb959ff1b22afa0da8621782afe61f99242bf716c403802ffbdb21d51  libgit2-v0.27.4.tar.gz
+sha256	f6fd26378ff71bd7a4b17b576c82c774a2e9c2d6b74b24718a8fb29551e1c4a5  libgit2-0.27.10.tar.gz
 sha256	d9a8038088df84fde493fa33a0f1e537252eeb9642122aa4b862690197152813  COPYING
diff --git a/buildroot/package/libgit2/libgit2.mk b/buildroot/package/libgit2/libgit2.mk
index 551e3dea6..e797ca518 100644
--- a/buildroot/package/libgit2/libgit2.mk
+++ b/buildroot/package/libgit2/libgit2.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-LIBGIT2_VERSION = v0.27.4
-LIBGIT2_SITE = $(call github,libgit2,libgit2,$(LIBGIT2_VERSION))
+LIBGIT2_VERSION = 0.27.10
+LIBGIT2_SITE = $(call github,libgit2,libgit2,v$(LIBGIT2_VERSION))
 LIBGIT2_LICENSE = GPL-2.0 with linking exception
 LIBGIT2_LICENSE_FILES = COPYING
 LIBGIT2_INSTALL_STAGING = YES
diff --git a/buildroot/package/libglib2/0005-gfile-Limit-access-to-files-when-copying.patch b/buildroot/package/libglib2/0005-gfile-Limit-access-to-files-when-copying.patch
new file mode 100644
index 000000000..750767dfb
--- /dev/null
+++ b/buildroot/package/libglib2/0005-gfile-Limit-access-to-files-when-copying.patch
@@ -0,0 +1,56 @@
+From cf09035d361287dfadc93f09272ce68b4a9457ad Mon Sep 17 00:00:00 2001
+From: Ondrej Holy 
+Date: Thu, 23 May 2019 10:41:53 +0200
+Subject: [PATCH] gfile: Limit access to files when copying
+
+file_copy_fallback creates new files with default permissions and
+set the correct permissions after the operation is finished. This
+might cause that the files can be accessible by more users during
+the operation than expected. Use G_FILE_CREATE_PRIVATE for the new
+files to limit access to those files.
+
+(cherry picked from commit d8f8f4d637ce43f8699ba94c9b7648beda0ca174)
+Signed-off-by: Peter Korsgaard 
+---
+ gio/gfile.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/gio/gfile.c b/gio/gfile.c
+index a67aad383..ff313ebf8 100644
+--- a/gio/gfile.c
++++ b/gio/gfile.c
+@@ -3279,12 +3279,12 @@ file_copy_fallback (GFile                  *source,
+         out = (GOutputStream*)_g_local_file_output_stream_replace (_g_local_file_get_filename (G_LOCAL_FILE (destination)),
+                                                                    FALSE, NULL,
+                                                                    flags & G_FILE_COPY_BACKUP,
+-                                                                   G_FILE_CREATE_REPLACE_DESTINATION,
+-                                                                   info,
++                                                                   G_FILE_CREATE_REPLACE_DESTINATION |
++                                                                   G_FILE_CREATE_PRIVATE, info,
+                                                                    cancellable, error);
+       else
+         out = (GOutputStream*)_g_local_file_output_stream_create (_g_local_file_get_filename (G_LOCAL_FILE (destination)),
+-                                                                  FALSE, 0, info,
++                                                                  FALSE, G_FILE_CREATE_PRIVATE, info,
+                                                                   cancellable, error);
+     }
+   else if (flags & G_FILE_COPY_OVERWRITE)
+@@ -3292,12 +3292,13 @@ file_copy_fallback (GFile                  *source,
+       out = (GOutputStream *)g_file_replace (destination,
+                                              NULL,
+                                              flags & G_FILE_COPY_BACKUP,
+-                                             G_FILE_CREATE_REPLACE_DESTINATION,
++                                             G_FILE_CREATE_REPLACE_DESTINATION |
++                                             G_FILE_CREATE_PRIVATE,
+                                              cancellable, error);
+     }
+   else
+     {
+-      out = (GOutputStream *)g_file_create (destination, 0, cancellable, error);
++      out = (GOutputStream *)g_file_create (destination, G_FILE_CREATE_PRIVATE, cancellable, error);
+     }
+ 
+   if (!out)
+-- 
+2.11.0
+
diff --git a/buildroot/package/libglob/Config.in b/buildroot/package/libglob/Config.in
index 029ed6a1d..7ae2bfd25 100644
--- a/buildroot/package/libglob/Config.in
+++ b/buildroot/package/libglob/Config.in
@@ -2,3 +2,5 @@ config BR2_PACKAGE_LIBGLOB
 	bool "libglob"
 	help
 	  OpenBSD implementation of glob(3).
+
+	  https://github.com/void-linux/libglob
diff --git a/buildroot/package/libgpg-error/0001-gawk5-support.patch b/buildroot/package/libgpg-error/0001-gawk5-support.patch
new file mode 100644
index 000000000..09d114c45
--- /dev/null
+++ b/buildroot/package/libgpg-error/0001-gawk5-support.patch
@@ -0,0 +1,162 @@
+From 7865041c77f4f7005282f10f9b6666b19072fbdf Mon Sep 17 00:00:00 2001
+From: NIIBE Yutaka 
+Date: Mon, 15 Apr 2019 15:10:44 +0900
+Subject: [PATCH] awk: Prepare for Gawk 5.0.
+
+* src/Makefile.am: Use pkg_namespace (instead of namespace).
+* src/mkerrnos.awk: Likewise.
+* lang/cl/mkerrcodes.awk: Don't escape # in regexp.
+* src/mkerrcodes.awk, src/mkerrcodes1.awk, src/mkerrcodes2.awk: Ditto.
+
+Downloaded from
+https://gitweb.gentoo.org/repo/gentoo.git/tree/dev-libs/libgpg-error/files/libgpg-error-1.36-gawk5-support.patch
+
+Signed-off-by: Bernd Kuhls 
+--
+
+In Gawk 5.0, regexp routines are replaced by Gnulib implementation,
+which only allows escaping specific characters.
+
+GnuPG-bug-id: 4459
+Reported-by: Marius Schamschula
+Signed-off-by: NIIBE Yutaka 
+---
+ lang/cl/mkerrcodes.awk |  2 +-
+ src/Makefile.am        |  2 +-
+ src/mkerrcodes.awk     |  2 +-
+ src/mkerrcodes1.awk    |  2 +-
+ src/mkerrcodes2.awk    |  2 +-
+ src/mkerrnos.awk       |  2 +-
+ src/mkstrtable.awk     | 10 +++++-----
+ 7 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/lang/cl/mkerrcodes.awk b/lang/cl/mkerrcodes.awk
+index ae29043..9a1fc18 100644
+--- a/lang/cl/mkerrcodes.awk
++++ b/lang/cl/mkerrcodes.awk
+@@ -122,7 +122,7 @@ header {
+ }
+ 
+ !header {
+-  sub (/\#.+/, "");
++  sub (/#.+/, "");
+   sub (/[ 	]+$/, ""); # Strip trailing space and tab characters.
+ 
+   if (/^$/)
+diff --git a/src/Makefile.am b/src/Makefile.am
+index ce1b882..f2590cb 100644
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -293,7 +293,7 @@ code-from-errno.h: mkerrcodes$(EXEEXT_FOR_BUILD) Makefile
+ 
+ errnos-sym.h: Makefile mkstrtable.awk errnos.in
+ 	$(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+-		-v prefix=GPG_ERR_ -v namespace=errnos_ \
++		-v prefix=GPG_ERR_ -v pkg_namespace=errnos_ \
+ 		$(srcdir)/errnos.in >$@
+ 
+ 
+diff --git a/src/mkerrcodes.awk b/src/mkerrcodes.awk
+index 46d436c..e9c857c 100644
+--- a/src/mkerrcodes.awk
++++ b/src/mkerrcodes.awk
+@@ -85,7 +85,7 @@ header {
+ }
+ 
+ !header {
+-  sub (/\#.+/, "");
++  sub (/#.+/, "");
+   sub (/[ 	]+$/, ""); # Strip trailing space and tab characters.
+ 
+   if (/^$/)
+diff --git a/src/mkerrcodes1.awk b/src/mkerrcodes1.awk
+index a771a73..4578e29 100644
+--- a/src/mkerrcodes1.awk
++++ b/src/mkerrcodes1.awk
+@@ -81,7 +81,7 @@ header {
+ }
+ 
+ !header {
+-  sub (/\#.+/, "");
++  sub (/#.+/, "");
+   sub (/[ 	]+$/, ""); # Strip trailing space and tab characters.
+ 
+   if (/^$/)
+diff --git a/src/mkerrcodes2.awk b/src/mkerrcodes2.awk
+index ea58503..188f7a4 100644
+--- a/src/mkerrcodes2.awk
++++ b/src/mkerrcodes2.awk
+@@ -91,7 +91,7 @@ header {
+ }
+ 
+ !header {
+-  sub (/\#.+/, "");
++  sub (/#.+/, "");
+   sub (/[ 	]+$/, ""); # Strip trailing space and tab characters.
+ 
+   if (/^$/)
+diff --git a/src/mkerrnos.awk b/src/mkerrnos.awk
+index f79df66..15b1aad 100644
+--- a/src/mkerrnos.awk
++++ b/src/mkerrnos.awk
+@@ -83,7 +83,7 @@ header {
+ }
+ 
+ !header {
+-  sub (/\#.+/, "");
++  sub (/#.+/, "");
+   sub (/[ 	]+$/, ""); # Strip trailing space and tab characters.
+ 
+   if (/^$/)
+diff --git a/src/mkstrtable.awk b/src/mkstrtable.awk
+index c9de9c1..285e45f 100644
+--- a/src/mkstrtable.awk
++++ b/src/mkstrtable.awk
+@@ -77,7 +77,7 @@
+ #
+ # The variable prefix can be used to prepend a string to each message.
+ #
+-# The variable namespace can be used to prepend a string to each
++# The variable pkg_namespace can be used to prepend a string to each
+ # variable and macro name.
+ 
+ BEGIN {
+@@ -102,7 +102,7 @@ header {
+       print "/* The purpose of this complex string table is to produce";
+       print "   optimal code with a minimum of relocations.  */";
+       print "";
+-      print "static const char " namespace "msgstr[] = ";
++      print "static const char " pkg_namespace "msgstr[] = ";
+       header = 0;
+     }
+   else
+@@ -110,7 +110,7 @@ header {
+ }
+ 
+ !header {
+-  sub (/\#.+/, "");
++  sub (/#.+/, "");
+   sub (/[ 	]+$/, ""); # Strip trailing space and tab characters.
+ 
+   if (/^$/)
+@@ -150,7 +150,7 @@ END {
+   else
+     print "  gettext_noop (\"" last_msgstr "\");";
+   print "";
+-  print "static const int " namespace "msgidx[] =";
++  print "static const int " pkg_namespace "msgidx[] =";
+   print "  {";
+   for (i = 0; i < coded_msgs; i++)
+     print "    " pos[i] ",";
+@@ -158,7 +158,7 @@ END {
+   print "  };";
+   print "";
+   print "static GPG_ERR_INLINE int";
+-  print namespace "msgidxof (int code)";
++  print pkg_namespace "msgidxof (int code)";
+   print "{";
+   print "  return (0 ? 0";
+ 
+-- 
+2.21.0
+
diff --git a/buildroot/package/libgpg-error/libgpg-error.mk b/buildroot/package/libgpg-error/libgpg-error.mk
index d26d92fb0..a34c85bff 100644
--- a/buildroot/package/libgpg-error/libgpg-error.mk
+++ b/buildroot/package/libgpg-error/libgpg-error.mk
@@ -10,6 +10,8 @@ LIBGPG_ERROR_SOURCE = libgpg-error-$(LIBGPG_ERROR_VERSION).tar.bz2
 LIBGPG_ERROR_LICENSE = GPL-2.0+, LGPL-2.1+
 LIBGPG_ERROR_LICENSE_FILES = COPYING COPYING.LIB
 LIBGPG_ERROR_INSTALL_STAGING = YES
+# 0001-gawk5-support.patch
+LIBGPG_ERROR_AUTORECONF = YES
 LIBGPG_ERROR_CONFIG_SCRIPTS = gpg-error-config
 LIBGPG_ERROR_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES)
 LIBGPG_ERROR_CONF_OPTS = --disable-tests \
diff --git a/buildroot/package/libgtk2/libgtk2.mk b/buildroot/package/libgtk2/libgtk2.mk
index 8f60573a5..710e6e47d 100644
--- a/buildroot/package/libgtk2/libgtk2.mk
+++ b/buildroot/package/libgtk2/libgtk2.mk
@@ -21,7 +21,10 @@ LIBGTK2_CONF_ENV = \
 
 LIBGTK2_CONF_OPTS = --disable-glibtest --enable-explicit-deps=no
 
-LIBGTK2_DEPENDENCIES = host-pkgconf host-libgtk2 libglib2 cairo pango atk gdk-pixbuf
+LIBGTK2_DEPENDENCIES = host-pkgconf host-libgtk2 libglib2 cairo pango atk \
+	gdk-pixbuf $(TARGET_NLS_DEPENDENCIES)
+
+LIBGTK2_MAKE_OPTS = LIBS=$(TARGET_NLS_LIBS)
 
 # Xorg dependencies
 LIBGTK2_CONF_OPTS += \
diff --git a/buildroot/package/libgtk3/libgtk3.mk b/buildroot/package/libgtk3/libgtk3.mk
index bdf820de3..b9adc673f 100644
--- a/buildroot/package/libgtk3/libgtk3.mk
+++ b/buildroot/package/libgtk3/libgtk3.mk
@@ -24,9 +24,11 @@ LIBGTK3_CONF_OPTS = \
 
 # Override pkg-config pkgdatadir variable, it needs the prefix
 LIBGTK3_MAKE_OPTS = \
-	WAYLAND_PROTOCOLS_DATADIR=$(STAGING_DIR)/usr/share/wayland-protocols
+	WAYLAND_PROTOCOLS_DATADIR=$(STAGING_DIR)/usr/share/wayland-protocols \
+	LIBS=$(TARGET_NLS_LIBS)
 
-LIBGTK3_DEPENDENCIES = host-pkgconf host-libgtk3 atk libglib2 cairo pango gdk-pixbuf libepoxy
+LIBGTK3_DEPENDENCIES = host-pkgconf host-libgtk3 atk libglib2 cairo pango \
+	gdk-pixbuf libepoxy $(TARGET_NLS_DEPENDENCIES)
 
 ifeq ($(BR2_PACKAGE_LIBGTK3_X11),y)
 LIBGTK3_DEPENDENCIES += fontconfig xlib_libX11 xlib_libXext xlib_libXrender xlib_libXi
diff --git a/buildroot/package/libhid/Config.in b/buildroot/package/libhid/Config.in
index e6f201286..ec6630806 100644
--- a/buildroot/package/libhid/Config.in
+++ b/buildroot/package/libhid/Config.in
@@ -6,7 +6,7 @@ config BR2_PACKAGE_LIBHID
 	help
 	  Userspace library for accessing USB HID devices
 
-	  http://libhid.alioth.debian.org
+	  https://directory.fsf.org/wiki/Libhid
 
 comment "libhid needs a toolchain w/ threads"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/libiscsi/Config.in b/buildroot/package/libiscsi/Config.in
index 760fecea6..8e588c9ef 100644
--- a/buildroot/package/libiscsi/Config.in
+++ b/buildroot/package/libiscsi/Config.in
@@ -9,4 +9,4 @@ config BR2_PACKAGE_LIBISCSI
 	  scsi tasks, but a sync layer is also provided for ease of use
 	  for simpler applications.
 
-	  https://github.com/sahlberg/libiscsi  (no proper homepage)
+	  https://github.com/sahlberg/libiscsi
diff --git a/buildroot/package/libkrb5/libkrb5.mk b/buildroot/package/libkrb5/libkrb5.mk
index 56345416a..38b39ffd6 100644
--- a/buildroot/package/libkrb5/libkrb5.mk
+++ b/buildroot/package/libkrb5/libkrb5.mk
@@ -41,7 +41,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_LIBEDIT),y)
 LIBKRB5_CONF_OPTS += --with-libedit
-LIBKRB5_DEPENDENCIES += libedit
+LIBKRB5_DEPENDENCIES += host-pkgconf libedit
 else
 LIBKRB5_CONF_OPTS += --without-libedit
 endif
diff --git a/buildroot/package/liblockfile/Config.in b/buildroot/package/liblockfile/Config.in
index 88a9c338b..83ffea86c 100644
--- a/buildroot/package/liblockfile/Config.in
+++ b/buildroot/package/liblockfile/Config.in
@@ -2,3 +2,5 @@ config BR2_PACKAGE_LIBLOCKFILE
 	bool "liblockfile"
 	help
 	  NFS-safe locking library.
+
+	  https://github.com/miquels/liblockfile
diff --git a/buildroot/package/libmodplug/libmodplug.hash b/buildroot/package/libmodplug/libmodplug.hash
index d50a56eed..e75152e27 100644
--- a/buildroot/package/libmodplug/libmodplug.hash
+++ b/buildroot/package/libmodplug/libmodplug.hash
@@ -1,3 +1,3 @@
 # Locally computed:
-sha256  77462d12ee99476c8645cb5511363e3906b88b33a6b54362b4dbc0f39aa2daad  libmodplug-0.8.8.5.tar.gz
+sha256  457ca5a6c179656d66c01505c0d95fafaead4329b9dbaa0f997d00a3508ad9de  libmodplug-0.8.9.0.tar.gz
 sha256  49942e7b3b175f549e751feb08b5270ca6f6c5fb7a1be9f9517db275ec32c92e  COPYING
diff --git a/buildroot/package/libmodplug/libmodplug.mk b/buildroot/package/libmodplug/libmodplug.mk
index d9d74df50..05786ce81 100644
--- a/buildroot/package/libmodplug/libmodplug.mk
+++ b/buildroot/package/libmodplug/libmodplug.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBMODPLUG_VERSION = 0.8.8.5
+LIBMODPLUG_VERSION = 0.8.9.0
 LIBMODPLUG_SITE = http://downloads.sourceforge.net/project/modplug-xmms/libmodplug/$(LIBMODPLUG_VERSION)
 LIBMODPLUG_INSTALL_STAGING = YES
 LIBMODPLUG_LICENSE = Public Domain
diff --git a/buildroot/package/libmspack/Config.in b/buildroot/package/libmspack/Config.in
new file mode 100644
index 000000000..e2b1a9059
--- /dev/null
+++ b/buildroot/package/libmspack/Config.in
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_LIBMSPACK
+	bool "libmspack"
+	help
+	  libmspack is a portable library for some loosely related
+	  Microsoft compression formats
+
+	  https://www.cabextract.org.uk/libmspack
diff --git a/buildroot/package/libmspack/libmspack.hash b/buildroot/package/libmspack/libmspack.hash
new file mode 100644
index 000000000..b12e9b628
--- /dev/null
+++ b/buildroot/package/libmspack/libmspack.hash
@@ -0,0 +1,3 @@
+# Locally computed
+sha256 bac862dee6e0fc10d92c70212441d9f8ad9b0222edc9a708c3ead4adb1b24a8e  libmspack-0.10.1alpha.tar.gz
+sha256 a190dc9c8043755d90f8b0a75fa66b9e42d4af4c980bf5ddc633f0124db3cee7  COPYING.LIB
diff --git a/buildroot/package/libmspack/libmspack.mk b/buildroot/package/libmspack/libmspack.mk
new file mode 100644
index 000000000..e9fdc3ca8
--- /dev/null
+++ b/buildroot/package/libmspack/libmspack.mk
@@ -0,0 +1,13 @@
+################################################################################
+#
+# libmspack
+#
+################################################################################
+
+LIBMSPACK_VERSION = 0.10.1alpha
+LIBMSPACK_SITE = https://www.cabextract.org.uk/libmspack
+LIBMSPACK_LICENSE = LGPL-2.1
+LIBMSPACK_LICENSE_FILES = COPYING.LIB
+LIBMSPACK_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
diff --git a/buildroot/package/libnftnl/0002-Add-Libs.private-field-to-libnftnl.pc.patch b/buildroot/package/libnftnl/0001-Add-Libs.private-field-to-libnftnl.pc.patch
similarity index 100%
rename from buildroot/package/libnftnl/0002-Add-Libs.private-field-to-libnftnl.pc.patch
rename to buildroot/package/libnftnl/0001-Add-Libs.private-field-to-libnftnl.pc.patch
diff --git a/buildroot/package/libnftnl/0001-Rename-xfree-to-libnftnl_xfree-to-avoid-symbol-namin.patch b/buildroot/package/libnftnl/0001-Rename-xfree-to-libnftnl_xfree-to-avoid-symbol-namin.patch
deleted file mode 100644
index 213aab79e..000000000
--- a/buildroot/package/libnftnl/0001-Rename-xfree-to-libnftnl_xfree-to-avoid-symbol-namin.patch
+++ /dev/null
@@ -1,1032 +0,0 @@
-From 90a0152c224fa90f648b27187859bd84f6426e1b Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni 
-Date: Thu, 2 Jun 2016 23:03:27 -0300
-Subject: [PATCH] Rename xfree() to libnftnl_xfree() to avoid symbol naming
- conflict
-
-When ELF binaries and shared libraries are used, the internal
-functions of libnftnl such as xfree() are not visible to the outside
-world (their visibility is 'hidden'). Therefore, the fact that other
-programs (especially nftables) may have symbols with the same name
-does not cause any problem.
-
-However, when doing static linking on a non-ELF platform (such as
-Blackfin, which uses the FLAT binary format), there is no way of
-encoding this visibility. Therefore, the xfree() symbols of libnftnl
-becomes visible to the outside world, causing a conflict with the
-xfree() symbol defined by nftables.
-
-To solve this, this patch renames the libnftnl xfree() function to
-libnftnl_xfree().
-
-Signed-off-by: Thomas Petazzoni 
-[Gustavo: update for version 1.0.7]
-Signed-off-by: Gustavo Zacarias 
-[baruch: update for versions 1.0.9, 1.1.2]
-Signed-off-by: Baruch Siach 
----
- include/utils.h         |  2 +-
- src/chain.c             | 36 ++++++++++++++++++------------------
- src/common.c            |  2 +-
- src/expr.c              |  4 ++--
- src/expr/data_reg.c     |  2 +-
- src/expr/dynset.c       |  2 +-
- src/expr/flow_offload.c |  2 +-
- src/expr/immediate.c    |  2 +-
- src/expr/log.c          |  6 +++---
- src/expr/lookup.c       |  2 +-
- src/expr/match.c        |  6 +++---
- src/expr/target.c       |  6 +++---
- src/flowtable.c         | 32 ++++++++++++++++----------------
- src/gen.c               |  2 +-
- src/object.c            | 14 +++++++-------
- src/rule.c              | 32 ++++++++++++++++----------------
- src/ruleset.c           |  2 +-
- src/set.c               | 28 ++++++++++++++--------------
- src/set_elem.c          | 28 ++++++++++++++--------------
- src/table.c             | 14 +++++++-------
- src/trace.c             | 14 +++++++-------
- src/udata.c             |  2 +-
- src/utils.c             |  2 +-
- 23 files changed, 121 insertions(+), 121 deletions(-)
-
-diff --git a/include/utils.h b/include/utils.h
-index 3cc659652fe2..820556715013 100644
---- a/include/utils.h
-+++ b/include/utils.h
-@@ -17,7 +17,7 @@
- 
- #define __noreturn	__attribute__((__noreturn__))
- 
--#define xfree(ptr)	free((void *)ptr);
-+#define nftnl_xfree(ptr)	free((void *)ptr);
- 
- #define div_round_up(n, d)	(((n) + (d) - 1) / (d))
- 
-diff --git a/src/chain.c b/src/chain.c
-index 01d62c84f140..93e193955934 100644
---- a/src/chain.c
-+++ b/src/chain.c
-@@ -97,14 +97,14 @@ EXPORT_SYMBOL(nftnl_chain_free);
- void nftnl_chain_free(const struct nftnl_chain *c)
- {
- 	if (c->flags & (1 << NFTNL_CHAIN_NAME))
--		xfree(c->name);
-+		nftnl_xfree(c->name);
- 	if (c->flags & (1 << NFTNL_CHAIN_TABLE))
--		xfree(c->table);
-+		nftnl_xfree(c->table);
- 	if (c->flags & (1 << NFTNL_CHAIN_TYPE))
--		xfree(c->type);
-+		nftnl_xfree(c->type);
- 	if (c->flags & (1 << NFTNL_CHAIN_DEV))
--		xfree(c->dev);
--	xfree(c);
-+		nftnl_xfree(c->dev);
-+	nftnl_xfree(c);
- }
- 
- EXPORT_SYMBOL(nftnl_chain_is_set);
-@@ -121,15 +121,15 @@ void nftnl_chain_unset(struct nftnl_chain *c, uint16_t attr)
- 
- 	switch (attr) {
- 	case NFTNL_CHAIN_NAME:
--		xfree(c->name);
-+		nftnl_xfree(c->name);
- 		break;
- 	case NFTNL_CHAIN_TABLE:
--		xfree(c->table);
-+		nftnl_xfree(c->table);
- 		break;
- 	case NFTNL_CHAIN_USE:
- 		break;
- 	case NFTNL_CHAIN_TYPE:
--		xfree(c->type);
-+		nftnl_xfree(c->type);
- 		break;
- 	case NFTNL_CHAIN_HOOKNUM:
- 	case NFTNL_CHAIN_PRIO:
-@@ -140,7 +140,7 @@ void nftnl_chain_unset(struct nftnl_chain *c, uint16_t attr)
- 	case NFTNL_CHAIN_FAMILY:
- 		break;
- 	case NFTNL_CHAIN_DEV:
--		xfree(c->dev);
-+		nftnl_xfree(c->dev);
- 		break;
- 	default:
- 		return;
-@@ -169,7 +169,7 @@ int nftnl_chain_set_data(struct nftnl_chain *c, uint16_t attr,
- 	switch(attr) {
- 	case NFTNL_CHAIN_NAME:
- 		if (c->flags & (1 << NFTNL_CHAIN_NAME))
--			xfree(c->name);
-+			nftnl_xfree(c->name);
- 
- 		c->name = strdup(data);
- 		if (!c->name)
-@@ -177,7 +177,7 @@ int nftnl_chain_set_data(struct nftnl_chain *c, uint16_t attr,
- 		break;
- 	case NFTNL_CHAIN_TABLE:
- 		if (c->flags & (1 << NFTNL_CHAIN_TABLE))
--			xfree(c->table);
-+			nftnl_xfree(c->table);
- 
- 		c->table = strdup(data);
- 		if (!c->table)
-@@ -209,7 +209,7 @@ int nftnl_chain_set_data(struct nftnl_chain *c, uint16_t attr,
- 		break;
- 	case NFTNL_CHAIN_TYPE:
- 		if (c->flags & (1 << NFTNL_CHAIN_TYPE))
--			xfree(c->type);
-+			nftnl_xfree(c->type);
- 
- 		c->type = strdup(data);
- 		if (!c->type)
-@@ -217,7 +217,7 @@ int nftnl_chain_set_data(struct nftnl_chain *c, uint16_t attr,
- 		break;
- 	case NFTNL_CHAIN_DEV:
- 		if (c->flags & (1 << NFTNL_CHAIN_DEV))
--			xfree(c->dev);
-+			nftnl_xfree(c->dev);
- 
- 		c->dev = strdup(data);
- 		if (!c->dev)
-@@ -541,7 +541,7 @@ int nftnl_chain_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_chain *c)
- 
- 	if (tb[NFTA_CHAIN_NAME]) {
- 		if (c->flags & (1 << NFTNL_CHAIN_NAME))
--			xfree(c->name);
-+			nftnl_xfree(c->name);
- 		c->name = strdup(mnl_attr_get_str(tb[NFTA_CHAIN_NAME]));
- 		if (!c->name)
- 			return -1;
-@@ -549,7 +549,7 @@ int nftnl_chain_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_chain *c)
- 	}
- 	if (tb[NFTA_CHAIN_TABLE]) {
- 		if (c->flags & (1 << NFTNL_CHAIN_TABLE))
--			xfree(c->table);
-+			nftnl_xfree(c->table);
- 		c->table = strdup(mnl_attr_get_str(tb[NFTA_CHAIN_TABLE]));
- 		if (!c->table)
- 			return -1;
-@@ -579,7 +579,7 @@ int nftnl_chain_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_chain *c)
- 	}
- 	if (tb[NFTA_CHAIN_TYPE]) {
- 		if (c->flags & (1 << NFTNL_CHAIN_TYPE))
--			xfree(c->type);
-+			nftnl_xfree(c->type);
- 		c->type = strdup(mnl_attr_get_str(tb[NFTA_CHAIN_TYPE]));
- 		if (!c->type)
- 			return -1;
-@@ -711,7 +711,7 @@ void nftnl_chain_list_free(struct nftnl_chain_list *list)
- 		list_del(&r->head);
- 		nftnl_chain_free(r);
- 	}
--	xfree(list);
-+	nftnl_xfree(list);
- }
- 
- EXPORT_SYMBOL(nftnl_chain_list_is_empty);
-@@ -797,5 +797,5 @@ struct nftnl_chain *nftnl_chain_list_iter_next(struct nftnl_chain_list_iter *ite
- EXPORT_SYMBOL(nftnl_chain_list_iter_destroy);
- void nftnl_chain_list_iter_destroy(struct nftnl_chain_list_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
-diff --git a/src/common.c b/src/common.c
-index feb13b2aa836..de7e9d08b9e2 100644
---- a/src/common.c
-+++ b/src/common.c
-@@ -68,7 +68,7 @@ struct nftnl_parse_err *nftnl_parse_err_alloc(void)
- EXPORT_SYMBOL(nftnl_parse_err_free);
- void nftnl_parse_err_free(struct nftnl_parse_err *err)
- {
--	xfree(err);
-+	nftnl_xfree(err);
- }
- 
- EXPORT_SYMBOL(nftnl_parse_perror);
-diff --git a/src/expr.c b/src/expr.c
-index 80c4c36a9bd7..f5e44cd16349 100644
---- a/src/expr.c
-+++ b/src/expr.c
-@@ -51,7 +51,7 @@ void nftnl_expr_free(const struct nftnl_expr *expr)
- 	if (expr->ops->free)
- 		expr->ops->free(expr);
- 
--	xfree(expr);
-+	nftnl_xfree(expr);
- }
- 
- EXPORT_SYMBOL(nftnl_expr_is_set);
-@@ -260,7 +260,7 @@ struct nftnl_expr *nftnl_expr_parse(struct nlattr *attr)
- 	return expr;
- 
- err2:
--	xfree(expr);
-+	nftnl_xfree(expr);
- err1:
- 	return NULL;
- }
-diff --git a/src/expr/data_reg.c b/src/expr/data_reg.c
-index 67165feb931f..c6f3cec48caf 100644
---- a/src/expr/data_reg.c
-+++ b/src/expr/data_reg.c
-@@ -225,7 +225,7 @@ void nftnl_free_verdict(const union nftnl_data_reg *data)
- 	switch(data->verdict) {
- 	case NFT_JUMP:
- 	case NFT_GOTO:
--		xfree(data->chain);
-+		nftnl_xfree(data->chain);
- 		break;
- 	default:
- 		break;
-diff --git a/src/expr/dynset.c b/src/expr/dynset.c
-index 68115ba50c94..4e8093b7e9db 100644
---- a/src/expr/dynset.c
-+++ b/src/expr/dynset.c
-@@ -276,7 +276,7 @@ static void nftnl_expr_dynset_free(const struct nftnl_expr *e)
- {
- 	struct nftnl_expr_dynset *dynset = nftnl_expr_data(e);
- 
--	xfree(dynset->set_name);
-+	nftnl_xfree(dynset->set_name);
- }
- 
- struct expr_ops expr_ops_dynset = {
-diff --git a/src/expr/flow_offload.c b/src/expr/flow_offload.c
-index 6ccec9a13396..877ad072ba53 100644
---- a/src/expr/flow_offload.c
-+++ b/src/expr/flow_offload.c
-@@ -122,7 +122,7 @@ static void nftnl_expr_flow_free(const struct nftnl_expr *e)
- {
- 	struct nftnl_expr_flow *flow = nftnl_expr_data(e);
- 
--	xfree(flow->table_name);
-+	nftnl_xfree(flow->table_name);
- }
- 
- struct expr_ops expr_ops_flow = {
-diff --git a/src/expr/immediate.c b/src/expr/immediate.c
-index 47106ae86675..b0289f9397fb 100644
---- a/src/expr/immediate.c
-+++ b/src/expr/immediate.c
-@@ -44,7 +44,7 @@ nftnl_expr_immediate_set(struct nftnl_expr *e, uint16_t type,
- 		break;
- 	case NFTNL_EXPR_IMM_CHAIN:
- 		if (e->flags & (1 << NFTNL_EXPR_IMM_CHAIN))
--			xfree(imm->data.chain);
-+			nftnl_xfree(imm->data.chain);
- 
- 		imm->data.chain = strdup(data);
- 		if (!imm->data.chain)
-diff --git a/src/expr/log.c b/src/expr/log.c
-index bbe43d2dc6bc..a5952ce10ccc 100644
---- a/src/expr/log.c
-+++ b/src/expr/log.c
-@@ -39,7 +39,7 @@ static int nftnl_expr_log_set(struct nftnl_expr *e, uint16_t type,
- 	switch(type) {
- 	case NFTNL_EXPR_LOG_PREFIX:
- 		if (log->flags & (1 << NFTNL_EXPR_LOG_PREFIX))
--			xfree(log->prefix);
-+			nftnl_xfree(log->prefix);
- 
- 		log->prefix = strdup(data);
- 		if (!log->prefix)
-@@ -155,7 +155,7 @@ nftnl_expr_log_parse(struct nftnl_expr *e, struct nlattr *attr)
- 
- 	if (tb[NFTA_LOG_PREFIX]) {
- 		if (log->prefix)
--			xfree(log->prefix);
-+			nftnl_xfree(log->prefix);
- 
- 		log->prefix = strdup(mnl_attr_get_str(tb[NFTA_LOG_PREFIX]));
- 		if (!log->prefix)
-@@ -255,7 +255,7 @@ static void nftnl_expr_log_free(const struct nftnl_expr *e)
- {
- 	struct nftnl_expr_log *log = nftnl_expr_data(e);
- 
--	xfree(log->prefix);
-+	nftnl_xfree(log->prefix);
- }
- 
- struct expr_ops expr_ops_log = {
-diff --git a/src/expr/lookup.c b/src/expr/lookup.c
-index a495ac0fdcfc..4fce24288c57 100644
---- a/src/expr/lookup.c
-+++ b/src/expr/lookup.c
-@@ -209,7 +209,7 @@ static void nftnl_expr_lookup_free(const struct nftnl_expr *e)
- {
- 	struct nftnl_expr_lookup *lookup = nftnl_expr_data(e);
- 
--	xfree(lookup->set_name);
-+	nftnl_xfree(lookup->set_name);
- }
- 
- struct expr_ops expr_ops_lookup = {
-diff --git a/src/expr/match.c b/src/expr/match.c
-index 4fa74b2da893..7ee706753b68 100644
---- a/src/expr/match.c
-+++ b/src/expr/match.c
-@@ -50,7 +50,7 @@ nftnl_expr_match_set(struct nftnl_expr *e, uint16_t type,
- 		break;
- 	case NFTNL_EXPR_MT_INFO:
- 		if (e->flags & (1 << NFTNL_EXPR_MT_INFO))
--			xfree(mt->data);
-+			nftnl_xfree(mt->data);
- 
- 		mt->data = data;
- 		mt->data_len = data_len;
-@@ -147,7 +147,7 @@ static int nftnl_expr_match_parse(struct nftnl_expr *e, struct nlattr *attr)
- 		void *match_data;
- 
- 		if (e->flags & (1 << NFTNL_EXPR_MT_INFO))
--			xfree(match->data);
-+			nftnl_xfree(match->data);
- 
- 		match_data = calloc(1, len);
- 		if (match_data == NULL)
-@@ -186,7 +186,7 @@ static void nftnl_expr_match_free(const struct nftnl_expr *e)
- {
- 	struct nftnl_expr_match *match = nftnl_expr_data(e);
- 
--	xfree(match->data);
-+	nftnl_xfree(match->data);
- }
- 
- struct expr_ops expr_ops_match = {
-diff --git a/src/expr/target.c b/src/expr/target.c
-index 91000386704a..5d0763edf63f 100644
---- a/src/expr/target.c
-+++ b/src/expr/target.c
-@@ -50,7 +50,7 @@ nftnl_expr_target_set(struct nftnl_expr *e, uint16_t type,
- 		break;
- 	case NFTNL_EXPR_TG_INFO:
- 		if (e->flags & (1 << NFTNL_EXPR_TG_INFO))
--			xfree(tg->data);
-+			nftnl_xfree(tg->data);
- 
- 		tg->data = data;
- 		tg->data_len = data_len;
-@@ -147,7 +147,7 @@ static int nftnl_expr_target_parse(struct nftnl_expr *e, struct nlattr *attr)
- 		void *target_data;
- 
- 		if (target->data)
--			xfree(target->data);
-+			nftnl_xfree(target->data);
- 
- 		target_data = calloc(1, len);
- 		if (target_data == NULL)
-@@ -186,7 +186,7 @@ static void nftnl_expr_target_free(const struct nftnl_expr *e)
- {
- 	struct nftnl_expr_target *target = nftnl_expr_data(e);
- 
--	xfree(target->data);
-+	nftnl_xfree(target->data);
- }
- 
- struct expr_ops expr_ops_target = {
-diff --git a/src/flowtable.c b/src/flowtable.c
-index c939306b56c4..f1b3eef48b73 100644
---- a/src/flowtable.c
-+++ b/src/flowtable.c
-@@ -45,16 +45,16 @@ void nftnl_flowtable_free(const struct nftnl_flowtable *c)
- 	int i;
- 
- 	if (c->flags & (1 << NFTNL_FLOWTABLE_NAME))
--		xfree(c->name);
-+		nftnl_xfree(c->name);
- 	if (c->flags & (1 << NFTNL_FLOWTABLE_TABLE))
--		xfree(c->table);
-+		nftnl_xfree(c->table);
- 	if (c->flags & (1 << NFTNL_FLOWTABLE_DEVICES)) {
- 		for (i = 0; i < c->dev_array_len; i++)
--			xfree(c->dev_array[i]);
-+			nftnl_xfree(c->dev_array[i]);
- 
--		xfree(c->dev_array);
-+		nftnl_xfree(c->dev_array);
- 	}
--	xfree(c);
-+	nftnl_xfree(c);
- }
- EXPORT_SYMBOL(nftnl_flowtable_free);
- 
-@@ -73,10 +73,10 @@ void nftnl_flowtable_unset(struct nftnl_flowtable *c, uint16_t attr)
- 
- 	switch (attr) {
- 	case NFTNL_FLOWTABLE_NAME:
--		xfree(c->name);
-+		nftnl_xfree(c->name);
- 		break;
- 	case NFTNL_FLOWTABLE_TABLE:
--		xfree(c->table);
-+		nftnl_xfree(c->table);
- 		break;
- 	case NFTNL_FLOWTABLE_HOOKNUM:
- 	case NFTNL_FLOWTABLE_PRIO:
-@@ -86,8 +86,8 @@ void nftnl_flowtable_unset(struct nftnl_flowtable *c, uint16_t attr)
- 		break;
- 	case NFTNL_FLOWTABLE_DEVICES:
- 		for (i = 0; i < c->dev_array_len; i++) {
--			xfree(c->dev_array[i]);
--			xfree(c->dev_array);
-+			nftnl_xfree(c->dev_array[i]);
-+			nftnl_xfree(c->dev_array);
- 		}
- 		break;
- 	default:
-@@ -117,7 +117,7 @@ int nftnl_flowtable_set_data(struct nftnl_flowtable *c, uint16_t attr,
- 	switch(attr) {
- 	case NFTNL_FLOWTABLE_NAME:
- 		if (c->flags & (1 << NFTNL_FLOWTABLE_NAME))
--			xfree(c->name);
-+			nftnl_xfree(c->name);
- 
- 		c->name = strdup(data);
- 		if (!c->name)
-@@ -125,7 +125,7 @@ int nftnl_flowtable_set_data(struct nftnl_flowtable *c, uint16_t attr,
- 		break;
- 	case NFTNL_FLOWTABLE_TABLE:
- 		if (c->flags & (1 << NFTNL_FLOWTABLE_TABLE))
--			xfree(c->table);
-+			nftnl_xfree(c->table);
- 
- 		c->table = strdup(data);
- 		if (!c->table)
-@@ -147,8 +147,8 @@ int nftnl_flowtable_set_data(struct nftnl_flowtable *c, uint16_t attr,
- 
- 		if (c->flags & (1 << NFTNL_FLOWTABLE_DEVICES)) {
- 			for (i = 0; i < c->dev_array_len; i++) {
--				xfree(c->dev_array[i]);
--				xfree(c->dev_array);
-+				nftnl_xfree(c->dev_array[i]);
-+				nftnl_xfree(c->dev_array);
- 			}
- 		}
- 
-@@ -423,7 +423,7 @@ int nftnl_flowtable_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_flowtab
- 
- 	if (tb[NFTA_FLOWTABLE_NAME]) {
- 		if (c->flags & (1 << NFTNL_FLOWTABLE_NAME))
--			xfree(c->name);
-+			nftnl_xfree(c->name);
- 		c->name = strdup(mnl_attr_get_str(tb[NFTA_FLOWTABLE_NAME]));
- 		if (!c->name)
- 			return -1;
-@@ -431,7 +431,7 @@ int nftnl_flowtable_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_flowtab
- 	}
- 	if (tb[NFTA_FLOWTABLE_TABLE]) {
- 		if (c->flags & (1 << NFTNL_FLOWTABLE_TABLE))
--			xfree(c->table);
-+			nftnl_xfree(c->table);
- 		c->table = strdup(mnl_attr_get_str(tb[NFTA_FLOWTABLE_TABLE]));
- 		if (!c->table)
- 			return -1;
-@@ -635,7 +635,7 @@ void nftnl_flowtable_list_free(struct nftnl_flowtable_list *list)
- 		list_del(&s->head);
- 		nftnl_flowtable_free(s);
- 	}
--	xfree(list);
-+	nftnl_xfree(list);
- }
- EXPORT_SYMBOL(nftnl_flowtable_list_free);
- 
-diff --git a/src/gen.c b/src/gen.c
-index 1fc909930d86..c69f6f87deae 100644
---- a/src/gen.c
-+++ b/src/gen.c
-@@ -38,7 +38,7 @@ struct nftnl_gen *nftnl_gen_alloc(void)
- EXPORT_SYMBOL(nftnl_gen_free);
- void nftnl_gen_free(const struct nftnl_gen *gen)
- {
--	xfree(gen);
-+	nftnl_xfree(gen);
- }
- 
- EXPORT_SYMBOL(nftnl_gen_is_set);
-diff --git a/src/object.c b/src/object.c
-index e88203a82441..28e04486c76c 100644
---- a/src/object.c
-+++ b/src/object.c
-@@ -53,11 +53,11 @@ EXPORT_SYMBOL(nftnl_obj_free);
- void nftnl_obj_free(const struct nftnl_obj *obj)
- {
- 	if (obj->flags & (1 << NFTNL_OBJ_TABLE))
--		xfree(obj->table);
-+		nftnl_xfree(obj->table);
- 	if (obj->flags & (1 << NFTNL_OBJ_NAME))
--		xfree(obj->name);
-+		nftnl_xfree(obj->name);
- 
--	xfree(obj);
-+	nftnl_xfree(obj);
- }
- 
- EXPORT_SYMBOL(nftnl_obj_is_set);
-@@ -81,11 +81,11 @@ void nftnl_obj_set_data(struct nftnl_obj *obj, uint16_t attr,
- 
- 	switch (attr) {
- 	case NFTNL_OBJ_TABLE:
--		xfree(obj->table);
-+		nftnl_xfree(obj->table);
- 		obj->table = strdup(data);
- 		break;
- 	case NFTNL_OBJ_NAME:
--		xfree(obj->name);
-+		nftnl_xfree(obj->name);
- 		obj->name = strdup(data);
- 		break;
- 	case NFTNL_OBJ_TYPE:
-@@ -452,7 +452,7 @@ void nftnl_obj_list_free(struct nftnl_obj_list *list)
- 		list_del(&r->head);
- 		nftnl_obj_free(r);
- 	}
--	xfree(list);
-+	nftnl_xfree(list);
- }
- 
- EXPORT_SYMBOL(nftnl_obj_list_is_empty);
-@@ -539,5 +539,5 @@ struct nftnl_obj *nftnl_obj_list_iter_next(struct nftnl_obj_list_iter *iter)
- EXPORT_SYMBOL(nftnl_obj_list_iter_destroy);
- void nftnl_obj_list_iter_destroy(struct nftnl_obj_list_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
-diff --git a/src/rule.c b/src/rule.c
-index 9af8fae2a803..0fce46e5c944 100644
---- a/src/rule.c
-+++ b/src/rule.c
-@@ -75,13 +75,13 @@ void nftnl_rule_free(const struct nftnl_rule *r)
- 		nftnl_expr_free(e);
- 
- 	if (r->flags & (1 << (NFTNL_RULE_TABLE)))
--		xfree(r->table);
-+		nftnl_xfree(r->table);
- 	if (r->flags & (1 << (NFTNL_RULE_CHAIN)))
--		xfree(r->chain);
-+		nftnl_xfree(r->chain);
- 	if (r->flags & (1 << (NFTNL_RULE_USERDATA)))
--		xfree(r->user.data);
-+		nftnl_xfree(r->user.data);
- 
--	xfree(r);
-+	nftnl_xfree(r);
- }
- 
- EXPORT_SYMBOL(nftnl_rule_is_set);
-@@ -98,10 +98,10 @@ void nftnl_rule_unset(struct nftnl_rule *r, uint16_t attr)
- 
- 	switch (attr) {
- 	case NFTNL_RULE_TABLE:
--		xfree(r->table);
-+		nftnl_xfree(r->table);
- 		break;
- 	case NFTNL_RULE_CHAIN:
--		xfree(r->chain);
-+		nftnl_xfree(r->chain);
- 		break;
- 	case NFTNL_RULE_HANDLE:
- 	case NFTNL_RULE_COMPAT_PROTO:
-@@ -111,7 +111,7 @@ void nftnl_rule_unset(struct nftnl_rule *r, uint16_t attr)
- 	case NFTNL_RULE_ID:
- 		break;
- 	case NFTNL_RULE_USERDATA:
--		xfree(r->user.data);
-+		nftnl_xfree(r->user.data);
- 		break;
- 	}
- 
-@@ -137,7 +137,7 @@ int nftnl_rule_set_data(struct nftnl_rule *r, uint16_t attr,
- 	switch(attr) {
- 	case NFTNL_RULE_TABLE:
- 		if (r->flags & (1 << NFTNL_RULE_TABLE))
--			xfree(r->table);
-+			nftnl_xfree(r->table);
- 
- 		r->table = strdup(data);
- 		if (!r->table)
-@@ -145,7 +145,7 @@ int nftnl_rule_set_data(struct nftnl_rule *r, uint16_t attr,
- 		break;
- 	case NFTNL_RULE_CHAIN:
- 		if (r->flags & (1 << NFTNL_RULE_CHAIN))
--			xfree(r->chain);
-+			nftnl_xfree(r->chain);
- 
- 		r->chain = strdup(data);
- 		if (!r->chain)
-@@ -168,7 +168,7 @@ int nftnl_rule_set_data(struct nftnl_rule *r, uint16_t attr,
- 		break;
- 	case NFTNL_RULE_USERDATA:
- 		if (r->flags & (1 << NFTNL_RULE_USERDATA))
--			xfree(r->user.data);
-+			nftnl_xfree(r->user.data);
- 
- 		r->user.data = malloc(data_len);
- 		if (!r->user.data)
-@@ -453,7 +453,7 @@ int nftnl_rule_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_rule *r)
- 
- 	if (tb[NFTA_RULE_TABLE]) {
- 		if (r->flags & (1 << NFTNL_RULE_TABLE))
--			xfree(r->table);
-+			nftnl_xfree(r->table);
- 		r->table = strdup(mnl_attr_get_str(tb[NFTA_RULE_TABLE]));
- 		if (!r->table)
- 			return -1;
-@@ -461,7 +461,7 @@ int nftnl_rule_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_rule *r)
- 	}
- 	if (tb[NFTA_RULE_CHAIN]) {
- 		if (r->flags & (1 << NFTNL_RULE_CHAIN))
--			xfree(r->chain);
-+			nftnl_xfree(r->chain);
- 		r->chain = strdup(mnl_attr_get_str(tb[NFTA_RULE_CHAIN]));
- 		if (!r->chain)
- 			return -1;
-@@ -490,7 +490,7 @@ int nftnl_rule_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_rule *r)
- 			mnl_attr_get_payload(tb[NFTA_RULE_USERDATA]);
- 
- 		if (r->flags & (1 << NFTNL_RULE_USERDATA))
--			xfree(r->user.data);
-+			nftnl_xfree(r->user.data);
- 
- 		r->user.len = mnl_attr_get_payload_len(tb[NFTA_RULE_USERDATA]);
- 
-@@ -737,7 +737,7 @@ struct nftnl_expr *nftnl_expr_iter_next(struct nftnl_expr_iter *iter)
- EXPORT_SYMBOL(nftnl_expr_iter_destroy);
- void nftnl_expr_iter_destroy(struct nftnl_expr_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
- 
- struct nftnl_rule_list {
-@@ -767,7 +767,7 @@ void nftnl_rule_list_free(struct nftnl_rule_list *list)
- 		list_del(&r->head);
- 		nftnl_rule_free(r);
- 	}
--	xfree(list);
-+	nftnl_xfree(list);
- }
- 
- EXPORT_SYMBOL(nftnl_rule_list_is_empty);
-@@ -865,5 +865,5 @@ struct nftnl_rule *nftnl_rule_list_iter_next(struct nftnl_rule_list_iter *iter)
- EXPORT_SYMBOL(nftnl_rule_list_iter_destroy);
- void nftnl_rule_list_iter_destroy(const struct nftnl_rule_list_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
-diff --git a/src/ruleset.c b/src/ruleset.c
-index 2468bd46cd5d..16059a305309 100644
---- a/src/ruleset.c
-+++ b/src/ruleset.c
-@@ -70,7 +70,7 @@ void nftnl_ruleset_free(const struct nftnl_ruleset *r)
- 		nftnl_set_list_free(r->set_list);
- 	if (r->flags & (1 << NFTNL_RULESET_RULELIST))
- 		nftnl_rule_list_free(r->rule_list);
--	xfree(r);
-+	nftnl_xfree(r);
- }
- 
- EXPORT_SYMBOL(nftnl_ruleset_is_set);
-diff --git a/src/set.c b/src/set.c
-index d1bdb165ab4b..53e54715d4b8 100644
---- a/src/set.c
-+++ b/src/set.c
-@@ -46,17 +46,17 @@ void nftnl_set_free(const struct nftnl_set *s)
- 	struct nftnl_set_elem *elem, *tmp;
- 
- 	if (s->flags & (1 << NFTNL_SET_TABLE))
--		xfree(s->table);
-+		nftnl_xfree(s->table);
- 	if (s->flags & (1 << NFTNL_SET_NAME))
--		xfree(s->name);
-+		nftnl_xfree(s->name);
- 	if (s->flags & (1 << NFTNL_SET_USERDATA))
--		xfree(s->user.data);
-+		nftnl_xfree(s->user.data);
- 
- 	list_for_each_entry_safe(elem, tmp, &s->element_list, head) {
- 		list_del(&elem->head);
- 		nftnl_set_elem_free(elem);
- 	}
--	xfree(s);
-+	nftnl_xfree(s);
- }
- 
- EXPORT_SYMBOL(nftnl_set_is_set);
-@@ -73,10 +73,10 @@ void nftnl_set_unset(struct nftnl_set *s, uint16_t attr)
- 
- 	switch (attr) {
- 	case NFTNL_SET_TABLE:
--		xfree(s->table);
-+		nftnl_xfree(s->table);
- 		break;
- 	case NFTNL_SET_NAME:
--		xfree(s->name);
-+		nftnl_xfree(s->name);
- 		break;
- 	case NFTNL_SET_HANDLE:
- 	case NFTNL_SET_FLAGS:
-@@ -93,7 +93,7 @@ void nftnl_set_unset(struct nftnl_set *s, uint16_t attr)
- 	case NFTNL_SET_GC_INTERVAL:
- 		break;
- 	case NFTNL_SET_USERDATA:
--		xfree(s->user.data);
-+		nftnl_xfree(s->user.data);
- 		break;
- 	default:
- 		return;
-@@ -127,7 +127,7 @@ int nftnl_set_set_data(struct nftnl_set *s, uint16_t attr, const void *data,
- 	switch(attr) {
- 	case NFTNL_SET_TABLE:
- 		if (s->flags & (1 << NFTNL_SET_TABLE))
--			xfree(s->table);
-+			nftnl_xfree(s->table);
- 
- 		s->table = strdup(data);
- 		if (!s->table)
-@@ -135,7 +135,7 @@ int nftnl_set_set_data(struct nftnl_set *s, uint16_t attr, const void *data,
- 		break;
- 	case NFTNL_SET_NAME:
- 		if (s->flags & (1 << NFTNL_SET_NAME))
--			xfree(s->name);
-+			nftnl_xfree(s->name);
- 
- 		s->name = strdup(data);
- 		if (!s->name)
-@@ -182,7 +182,7 @@ int nftnl_set_set_data(struct nftnl_set *s, uint16_t attr, const void *data,
- 		break;
- 	case NFTNL_SET_USERDATA:
- 		if (s->flags & (1 << NFTNL_SET_USERDATA))
--			xfree(s->user.data);
-+			nftnl_xfree(s->user.data);
- 
- 		s->user.data = malloc(data_len);
- 		if (!s->user.data)
-@@ -492,7 +492,7 @@ int nftnl_set_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_set *s)
- 
- 	if (tb[NFTA_SET_TABLE]) {
- 		if (s->flags & (1 << NFTNL_SET_TABLE))
--			xfree(s->table);
-+			nftnl_xfree(s->table);
- 		s->table = strdup(mnl_attr_get_str(tb[NFTA_SET_TABLE]));
- 		if (!s->table)
- 			return -1;
-@@ -500,7 +500,7 @@ int nftnl_set_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_set *s)
- 	}
- 	if (tb[NFTA_SET_NAME]) {
- 		if (s->flags & (1 << NFTNL_SET_NAME))
--			xfree(s->name);
-+			nftnl_xfree(s->name);
- 		s->name = strdup(mnl_attr_get_str(tb[NFTA_SET_NAME]));
- 		if (!s->name)
- 			return -1;
-@@ -742,7 +742,7 @@ void nftnl_set_list_free(struct nftnl_set_list *list)
- 		list_del(&s->head);
- 		nftnl_set_free(s);
- 	}
--	xfree(list);
-+	nftnl_xfree(list);
- }
- 
- EXPORT_SYMBOL(nftnl_set_list_is_empty);
-@@ -834,7 +834,7 @@ struct nftnl_set *nftnl_set_list_iter_next(struct nftnl_set_list_iter *iter)
- EXPORT_SYMBOL(nftnl_set_list_iter_destroy);
- void nftnl_set_list_iter_destroy(const struct nftnl_set_list_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
- 
- static struct nftnl_set *nftnl_set_lookup(const char *this_set_name,
-diff --git a/src/set_elem.c b/src/set_elem.c
-index ff983a67d62a..fac96cd368f1 100644
---- a/src/set_elem.c
-+++ b/src/set_elem.c
-@@ -43,18 +43,18 @@ EXPORT_SYMBOL(nftnl_set_elem_free);
- void nftnl_set_elem_free(struct nftnl_set_elem *s)
- {
- 	if (s->flags & (1 << NFTNL_SET_ELEM_CHAIN))
--		xfree(s->data.chain);
-+		nftnl_xfree(s->data.chain);
- 
- 	if (s->flags & (1 << NFTNL_SET_ELEM_EXPR))
- 		nftnl_expr_free(s->expr);
- 
- 	if (s->flags & (1 << NFTNL_SET_ELEM_USERDATA))
--		xfree(s->user.data);
-+		nftnl_xfree(s->user.data);
- 
- 	if (s->flags & (1 << NFTNL_SET_ELEM_OBJREF))
--		xfree(s->objref);
-+		nftnl_xfree(s->objref);
- 
--	xfree(s);
-+	nftnl_xfree(s);
- }
- 
- EXPORT_SYMBOL(nftnl_set_elem_is_set);
-@@ -71,7 +71,7 @@ void nftnl_set_elem_unset(struct nftnl_set_elem *s, uint16_t attr)
- 
- 	switch (attr) {
- 	case NFTNL_SET_ELEM_CHAIN:
--		xfree(s->data.chain);
-+		nftnl_xfree(s->data.chain);
- 		break;
- 	case NFTNL_SET_ELEM_FLAGS:
- 	case NFTNL_SET_ELEM_KEY:	/* NFTA_SET_ELEM_KEY */
-@@ -81,13 +81,13 @@ void nftnl_set_elem_unset(struct nftnl_set_elem *s, uint16_t attr)
- 	case NFTNL_SET_ELEM_EXPIRATION:	/* NFTA_SET_ELEM_EXPIRATION */
- 		break;
- 	case NFTNL_SET_ELEM_USERDATA:	/* NFTA_SET_ELEM_USERDATA */
--		xfree(s->user.data);
-+		nftnl_xfree(s->user.data);
- 		break;
- 	case NFTNL_SET_ELEM_EXPR:
- 		nftnl_expr_free(s->expr);
- 		break;
- 	case NFTNL_SET_ELEM_OBJREF:
--		xfree(s->objref);
-+		nftnl_xfree(s->objref);
- 		break;
- 	default:
- 		return;
-@@ -113,7 +113,7 @@ int nftnl_set_elem_set(struct nftnl_set_elem *s, uint16_t attr,
- 		break;
- 	case NFTNL_SET_ELEM_CHAIN:	/* NFTA_SET_ELEM_DATA */
- 		if (s->flags & (1 << NFTNL_SET_ELEM_CHAIN))
--			xfree(s->data.chain);
-+			nftnl_xfree(s->data.chain);
- 
- 		s->data.chain = strdup(data);
- 		if (!s->data.chain)
-@@ -128,7 +128,7 @@ int nftnl_set_elem_set(struct nftnl_set_elem *s, uint16_t attr,
- 		break;
- 	case NFTNL_SET_ELEM_USERDATA: /* NFTA_SET_ELEM_USERDATA */
- 		if (s->flags & (1 << NFTNL_SET_ELEM_USERDATA))
--			xfree(s->user.data);
-+			nftnl_xfree(s->user.data);
- 
- 		s->user.data = malloc(data_len);
- 		if (!s->user.data)
-@@ -138,7 +138,7 @@ int nftnl_set_elem_set(struct nftnl_set_elem *s, uint16_t attr,
- 		break;
- 	case NFTNL_SET_ELEM_OBJREF:
- 		if (s->flags & (1 << NFTNL_SET_ELEM_OBJREF))
--			xfree(s->objref);
-+			nftnl_xfree(s->objref);
- 
- 		s->objref = strdup(data);
- 		if (!s->objref)
-@@ -436,7 +436,7 @@ static int nftnl_set_elems_parse2(struct nftnl_set *s, const struct nlattr *nest
- 			mnl_attr_get_payload(tb[NFTA_SET_ELEM_USERDATA]);
- 
- 		if (e->flags & (1 << NFTNL_RULE_USERDATA))
--			xfree(e->user.data);
-+			nftnl_xfree(e->user.data);
- 
- 		e->user.len  = mnl_attr_get_payload_len(tb[NFTA_SET_ELEM_USERDATA]);
- 		e->user.data = malloc(e->user.len);
-@@ -521,7 +521,7 @@ int nftnl_set_elems_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_set *s)
- 
- 	if (tb[NFTA_SET_ELEM_LIST_TABLE]) {
- 		if (s->flags & (1 << NFTNL_SET_TABLE))
--			xfree(s->table);
-+			nftnl_xfree(s->table);
- 		s->table =
- 			strdup(mnl_attr_get_str(tb[NFTA_SET_ELEM_LIST_TABLE]));
- 		if (!s->table)
-@@ -530,7 +530,7 @@ int nftnl_set_elems_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_set *s)
- 	}
- 	if (tb[NFTA_SET_ELEM_LIST_SET]) {
- 		if (s->flags & (1 << NFTNL_SET_NAME))
--			xfree(s->name);
-+			nftnl_xfree(s->name);
- 		s->name =
- 			strdup(mnl_attr_get_str(tb[NFTA_SET_ELEM_LIST_SET]));
- 		if (!s->name)
-@@ -729,7 +729,7 @@ struct nftnl_set_elem *nftnl_set_elems_iter_next(struct nftnl_set_elems_iter *it
- EXPORT_SYMBOL(nftnl_set_elems_iter_destroy);
- void nftnl_set_elems_iter_destroy(struct nftnl_set_elems_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
- 
- static bool nftnl_attr_nest_overflow(struct nlmsghdr *nlh,
-diff --git a/src/table.c b/src/table.c
-index 54259eec7d06..888991b1b80d 100644
---- a/src/table.c
-+++ b/src/table.c
-@@ -47,9 +47,9 @@ EXPORT_SYMBOL(nftnl_table_free);
- void nftnl_table_free(const struct nftnl_table *t)
- {
- 	if (t->flags & (1 << NFTNL_TABLE_NAME))
--		xfree(t->name);
-+		nftnl_xfree(t->name);
- 
--	xfree(t);
-+	nftnl_xfree(t);
- }
- 
- EXPORT_SYMBOL(nftnl_table_is_set);
-@@ -66,7 +66,7 @@ void nftnl_table_unset(struct nftnl_table *t, uint16_t attr)
- 
- 	switch (attr) {
- 	case NFTNL_TABLE_NAME:
--		xfree(t->name);
-+		nftnl_xfree(t->name);
- 		break;
- 	case NFTNL_TABLE_FLAGS:
- 	case NFTNL_TABLE_HANDLE:
-@@ -94,7 +94,7 @@ int nftnl_table_set_data(struct nftnl_table *t, uint16_t attr,
- 	switch (attr) {
- 	case NFTNL_TABLE_NAME:
- 		if (t->flags & (1 << NFTNL_TABLE_NAME))
--			xfree(t->name);
-+			nftnl_xfree(t->name);
- 
- 		t->name = strdup(data);
- 		if (!t->name)
-@@ -258,7 +258,7 @@ int nftnl_table_nlmsg_parse(const struct nlmsghdr *nlh, struct nftnl_table *t)
- 
- 	if (tb[NFTA_TABLE_NAME]) {
- 		if (t->flags & (1 << NFTNL_TABLE_NAME))
--			xfree(t->name);
-+			nftnl_xfree(t->name);
- 		t->name = strdup(mnl_attr_get_str(tb[NFTA_TABLE_NAME]));
- 		if (!t->name)
- 			return -1;
-@@ -395,7 +395,7 @@ void nftnl_table_list_free(struct nftnl_table_list *list)
- 		list_del(&r->head);
- 		nftnl_table_free(r);
- 	}
--	xfree(list);
-+	nftnl_xfree(list);
- }
- 
- EXPORT_SYMBOL(nftnl_table_list_is_empty);
-@@ -481,5 +481,5 @@ struct nftnl_table *nftnl_table_list_iter_next(struct nftnl_table_list_iter *ite
- EXPORT_SYMBOL(nftnl_table_list_iter_destroy);
- void nftnl_table_list_iter_destroy(const struct nftnl_table_list_iter *iter)
- {
--	xfree(iter);
-+	nftnl_xfree(iter);
- }
-diff --git a/src/trace.c b/src/trace.c
-index f4264377508e..8a18391d83d1 100644
---- a/src/trace.c
-+++ b/src/trace.c
-@@ -61,13 +61,13 @@ struct nftnl_trace *nftnl_trace_alloc(void)
- EXPORT_SYMBOL(nftnl_trace_free);
- void nftnl_trace_free(const struct nftnl_trace *t)
- {
--	xfree(t->chain);
--	xfree(t->table);
--	xfree(t->jump_target);
--	xfree(t->ll.data);
--	xfree(t->nh.data);
--	xfree(t->th.data);
--	xfree(t);
-+	nftnl_xfree(t->chain);
-+	nftnl_xfree(t->table);
-+	nftnl_xfree(t->jump_target);
-+	nftnl_xfree(t->ll.data);
-+	nftnl_xfree(t->nh.data);
-+	nftnl_xfree(t->th.data);
-+	nftnl_xfree(t);
- }
- 
- EXPORT_SYMBOL(nftnl_trace_is_set);
-diff --git a/src/udata.c b/src/udata.c
-index b5a47295b40d..3b3be548036d 100644
---- a/src/udata.c
-+++ b/src/udata.c
-@@ -33,7 +33,7 @@ struct nftnl_udata_buf *nftnl_udata_buf_alloc(uint32_t data_size)
- EXPORT_SYMBOL(nftnl_udata_buf_free);
- void nftnl_udata_buf_free(const struct nftnl_udata_buf *buf)
- {
--	xfree(buf);
-+	nftnl_xfree(buf);
- }
- 
- EXPORT_SYMBOL(nftnl_udata_buf_len);
-diff --git a/src/utils.c b/src/utils.c
-index f641bf93ec68..02e7476a0ced 100644
---- a/src/utils.c
-+++ b/src/utils.c
-@@ -304,7 +304,7 @@ int nftnl_fprintf(FILE *fp, const void *obj, uint32_t cmd, uint32_t type,
- 
- out:
- 	if (buf != _buf)
--		xfree(buf);
-+		nftnl_xfree(buf);
- 
- 	return ret;
- }
--- 
-2.19.1
-
diff --git a/buildroot/package/libnftnl/libnftnl.hash b/buildroot/package/libnftnl/libnftnl.hash
index 3ecaeb8a1..64bd07a23 100644
--- a/buildroot/package/libnftnl/libnftnl.hash
+++ b/buildroot/package/libnftnl/libnftnl.hash
@@ -1,3 +1,3 @@
 # From http://www.netfilter.org/projects/libnftnl/downloads.html
-sha256	a5c7b7a6c13c9c5898b13fcb1126fefce2015d5a96d7c354b19aaa40b6aece5d 	libnftnl-1.1.2.tar.bz2
+sha256	22dd97d3b06ae8c67499506e2bfd6803ce116479076ec3700e7a4c7cd9fcba0f  	libnftnl-1.1.3.tar.bz2
 sha256	98193898c663001eff2fdcfb676e210c13042bc1a05e8d570c363efa396f8e24	COPYING
diff --git a/buildroot/package/libnftnl/libnftnl.mk b/buildroot/package/libnftnl/libnftnl.mk
index b8e015baf..a3fba488c 100644
--- a/buildroot/package/libnftnl/libnftnl.mk
+++ b/buildroot/package/libnftnl/libnftnl.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBNFTNL_VERSION = 1.1.2
+LIBNFTNL_VERSION = 1.1.3
 LIBNFTNL_SITE = https://netfilter.org/projects/libnftnl/files
 LIBNFTNL_SOURCE = libnftnl-$(LIBNFTNL_VERSION).tar.bz2
 LIBNFTNL_LICENSE = GPL-2.0+
diff --git a/buildroot/package/libnspr/0001-nios2.patch b/buildroot/package/libnspr/0001-nios2.patch
index 2a967c459..52fbbfddd 100644
--- a/buildroot/package/libnspr/0001-nios2.patch
+++ b/buildroot/package/libnspr/0001-nios2.patch
@@ -1,17 +1,18 @@
-Add Nios-II support
+Bug 1578360 - Add Nios-II support
 
 [Gustavo: update for nspr 4.10.9]
 Signed-off-by: Ezequiel Garcia 
 [Fabrice: update for nspr 4.20]
 Signed-off-by: Fabrice Fontaine 
+[Giulio: update for nspr 4.22]
+Signed-off-by: Giulio Benetti 
 
-Index: b/nspr/pr/include/md/_linux.cfg
-===================================================================
---- a/nspr/pr/include/md/_linux.cfg
-+++ b/nspr/pr/include/md/_linux.cfg
-@@ -1112,6 +1112,51 @@
- #define PR_BYTES_PER_WORD_LOG2  3
- #define PR_BYTES_PER_DWORD_LOG2 3
+diff -r 3af4891397ab -r 8487beb203e9 nspr/pr/include/md/_linux.cfg
+--- a/nspr/pr/include/md/_linux.cfg	Mon Aug 19 16:17:52 2019 +0200
++++ b/nspr/pr/include/md/_linux.cfg	Tue Sep 03 11:25:11 2019 +0200
+@@ -1157,6 +1157,51 @@
+ #define PR_BYTES_PER_WORD_LOG2   2
+ #define PR_BYTES_PER_DWORD_LOG2  3
  
 +#elif defined(__nios2__)
 +
@@ -61,14 +62,13 @@ Index: b/nspr/pr/include/md/_linux.cfg
  #else
  
  #error "Unknown CPU architecture"
-Index: b/nspr/pr/include/md/_linux.h
-===================================================================
---- a/nspr/pr/include/md/_linux.h
-+++ b/nspr/pr/include/md/_linux.h
-@@ -57,6 +57,8 @@
- #define _PR_SI_ARCHITECTURE "riscv32"
- #elif defined(__riscv) && (__riscv_xlen == 64)
+diff -r 3af4891397ab -r 8487beb203e9 nspr/pr/include/md/_linux.h
+--- a/nspr/pr/include/md/_linux.h	Mon Aug 19 16:17:52 2019 +0200
++++ b/nspr/pr/include/md/_linux.h	Tue Sep 03 11:25:11 2019 +0200
+@@ -63,6 +63,8 @@
  #define _PR_SI_ARCHITECTURE "riscv64"
+ #elif defined(__arc__)
+ #define _PR_SI_ARCHITECTURE "arc"
 +#elif defined(__nios2__)
 +#define _PR_SI_ARCHITECTURE "nios2"
  #else
diff --git a/buildroot/package/libnspr/0002-microblaze.patch b/buildroot/package/libnspr/0002-microblaze.patch
index 4c23259d5..6558882bd 100644
--- a/buildroot/package/libnspr/0002-microblaze.patch
+++ b/buildroot/package/libnspr/0002-microblaze.patch
@@ -1,15 +1,16 @@
-Add Microblaze support
+Bug 1578363 - Add Microblaze support
 
 [Gustavo: update for nspr 4.10.9]
 Signed-off-by: Spenser Gilliland 
 [Fabrice: update for nspr 4.20]
 Signed-off-by: Fabrice Fontaine 
+[Giulio: update for nspr 4.22]
+Signed-off-by: Giulio Benetti 
 
-Index: b/nspr/pr/include/md/_linux.cfg
-===================================================================
---- a/nspr/pr/include/md/_linux.cfg
-+++ b/nspr/pr/include/md/_linux.cfg
-@@ -1157,6 +1157,56 @@
+diff -r 8487beb203e9 -r ab7d5c504daf nspr/pr/include/md/_linux.cfg
+--- a/nspr/pr/include/md/_linux.cfg	Tue Sep 03 11:25:11 2019 +0200
++++ b/nspr/pr/include/md/_linux.cfg	Tue Sep 03 11:33:15 2019 +0200
+@@ -1202,6 +1202,56 @@
  #define PR_BYTES_PER_WORD_LOG2   2
  #define PR_BYTES_PER_DWORD_LOG2  3
  
@@ -66,16 +67,15 @@ Index: b/nspr/pr/include/md/_linux.cfg
  #else
  
  #error "Unknown CPU architecture"
-Index: b/nspr/pr/include/md/_linux.h
-===================================================================
---- a/nspr/pr/include/md/_linux.h
-+++ b/nspr/pr/include/md/_linux.h
-@@ -57,6 +57,8 @@
- #define _PR_SI_ARCHITECTURE "riscv32"
- #elif defined(__riscv) && (__riscv_xlen == 64)
- #define _PR_SI_ARCHITECTURE "riscv64"
-+#elif defined(__microblaze__)
-+#define _PR_SI_ARCHITECTURE "microblaze"
+diff -r 8487beb203e9 -r ab7d5c504daf nspr/pr/include/md/_linux.h
+--- a/nspr/pr/include/md/_linux.h	Tue Sep 03 11:25:11 2019 +0200
++++ b/nspr/pr/include/md/_linux.h	Tue Sep 03 11:33:15 2019 +0200
+@@ -65,6 +65,8 @@
+ #define _PR_SI_ARCHITECTURE "arc"
  #elif defined(__nios2__)
  #define _PR_SI_ARCHITECTURE "nios2"
++#elif defined(__microblaze__)
++#define _PR_SI_ARCHITECTURE "microblaze"
  #else
+ #error "Unknown CPU architecture"
+ #endif
diff --git a/buildroot/package/libnspr/0003-nds32.patch b/buildroot/package/libnspr/0003-nds32.patch
new file mode 100644
index 000000000..49d0d81ac
--- /dev/null
+++ b/buildroot/package/libnspr/0003-nds32.patch
@@ -0,0 +1,73 @@
+Bug 1578364 - Add Nds32 support
+
+Signed-off-by: Nylon Chen 
+[Giulio: update for nspr 4.22]
+Signed-off-by: Giulio Benetti 
+
+diff -r ab7d5c504daf -r d212d80704a2 nspr/pr/include/md/_linux.cfg
+--- a/nspr/pr/include/md/_linux.cfg	Tue Sep 03 11:33:15 2019 +0200
++++ b/nspr/pr/include/md/_linux.cfg	Tue Sep 03 11:36:05 2019 +0200
+@@ -1252,6 +1252,51 @@
+ #define PR_BYTES_PER_WORD_LOG2   2
+ #define PR_BYTES_PER_DWORD_LOG2  3
+ 
++#elif defined(__nds32__)
++
++#define IS_LITTLE_ENDIAN 1
++#undef  IS_BIG_ENDIAN
++
++#define PR_BYTES_PER_BYTE   1
++#define PR_BYTES_PER_SHORT  2
++#define PR_BYTES_PER_INT    4
++#define PR_BYTES_PER_INT64  8
++#define PR_BYTES_PER_LONG   4
++#define PR_BYTES_PER_FLOAT  4
++#define PR_BYTES_PER_DOUBLE 8
++#define PR_BYTES_PER_WORD   4
++#define PR_BYTES_PER_DWORD  8
++
++#define PR_BITS_PER_BYTE    8
++#define PR_BITS_PER_SHORT   16
++#define PR_BITS_PER_INT     32
++#define PR_BITS_PER_INT64   64
++#define PR_BITS_PER_LONG    32
++#define PR_BITS_PER_FLOAT   32
++#define PR_BITS_PER_DOUBLE  64
++#define PR_BITS_PER_WORD    32
++
++#define PR_BITS_PER_BYTE_LOG2   3
++#define PR_BITS_PER_SHORT_LOG2  4
++#define PR_BITS_PER_INT_LOG2    5
++#define PR_BITS_PER_INT64_LOG2  6
++#define PR_BITS_PER_LONG_LOG2   5
++#define PR_BITS_PER_FLOAT_LOG2  5
++#define PR_BITS_PER_DOUBLE_LOG2 6
++#define PR_BITS_PER_WORD_LOG2   5
++
++#define PR_ALIGN_OF_SHORT   2
++#define PR_ALIGN_OF_INT     4
++#define PR_ALIGN_OF_LONG    4
++#define PR_ALIGN_OF_INT64   4
++#define PR_ALIGN_OF_FLOAT   4
++#define PR_ALIGN_OF_DOUBLE  4
++#define PR_ALIGN_OF_POINTER 4
++#define PR_ALIGN_OF_WORD    4
++
++#define PR_BYTES_PER_WORD_LOG2   2
++#define PR_BYTES_PER_DWORD_LOG2  3
++
+ #else
+ 
+ #error "Unknown CPU architecture"
+diff -r ab7d5c504daf -r d212d80704a2 nspr/pr/include/md/_linux.h
+--- a/nspr/pr/include/md/_linux.h	Tue Sep 03 11:33:15 2019 +0200
++++ b/nspr/pr/include/md/_linux.h	Tue Sep 03 11:36:05 2019 +0200
+@@ -67,6 +67,8 @@
+ #define _PR_SI_ARCHITECTURE "nios2"
+ #elif defined(__microblaze__)
+ #define _PR_SI_ARCHITECTURE "microblaze"
++#elif defined(__nds32__)
++#define _PR_SI_ARCHITECTURE "nds32"
+ #else
+ #error "Unknown CPU architecture"
+ #endif
diff --git a/buildroot/package/libnspr/libnspr.hash b/buildroot/package/libnspr/libnspr.hash
index 33710b65a..0317f20b1 100644
--- a/buildroot/package/libnspr/libnspr.hash
+++ b/buildroot/package/libnspr/libnspr.hash
@@ -1,4 +1,4 @@
 # From https://ftp.mozilla.org/pub/nspr/releases/v4.20/src/SHA256SUMS
-sha256	2c8964913da89ffbaf464d49ce44d79e8804e1794ef9a8c52a7bff7224d1556e  nspr-4.20.tar.gz
+sha256	4b9d821037faf5723da901515ed9cac8b23ef1ea3729022259777393453477a4  nspr-4.23.tar.gz
 # Locally calculated
 sha256	fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85  nspr/LICENSE
diff --git a/buildroot/package/libnspr/libnspr.mk b/buildroot/package/libnspr/libnspr.mk
index 763c5393b..f21f69a74 100644
--- a/buildroot/package/libnspr/libnspr.mk
+++ b/buildroot/package/libnspr/libnspr.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBNSPR_VERSION = 4.20
+LIBNSPR_VERSION = 4.23
 LIBNSPR_SOURCE = nspr-$(LIBNSPR_VERSION).tar.gz
 LIBNSPR_SITE = https://ftp.mozilla.org/pub/mozilla.org/nspr/releases/v$(LIBNSPR_VERSION)/src
 LIBNSPR_SUBDIR = nspr
diff --git a/buildroot/package/libnss/0003-Bug-1590676-Fix-build-if-arm-doesn-t-support-NEON.patch b/buildroot/package/libnss/0003-Bug-1590676-Fix-build-if-arm-doesn-t-support-NEON.patch
new file mode 100644
index 000000000..467a1dc47
--- /dev/null
+++ b/buildroot/package/libnss/0003-Bug-1590676-Fix-build-if-arm-doesn-t-support-NEON.patch
@@ -0,0 +1,50 @@
+From c915be634cbfb90eb7880ec9efbdba9b98c6d4c1 Mon Sep 17 00:00:00 2001
+From: Giulio Benetti 
+Date: Wed, 23 Oct 2019 11:47:03 +0200
+Subject: [PATCH] Bug 1590676 - Fix build if arm doesn't support NEON
+
+At the moment NSS assumes that ARM supports NEON extension but this is
+not true and leads to build failure on ARM without NEON extension.
+Add check to assure USE_HW_AES is not defined if ARM without NEON
+extension is used.
+
+Signed-off-by: Giulio Benetti 
+---
+ nss/lib/freebl/aes-armv8.c | 5 +++--
+ nss/lib/freebl/rijndael.c  | 3 ++-
+ 2 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/nss/lib/freebl/aes-armv8.c b/nss/lib/freebl/aes-armv8.c
+index 40d5e2d34..057d1aed3 100644
+--- a/nss/lib/freebl/aes-armv8.c
++++ b/nss/lib/freebl/aes-armv8.c
+@@ -5,9 +5,10 @@
+ #include "secerr.h"
+ #include "rijndael.h"
+ 
+-#if (defined(__clang__) ||                            \
++#if ((defined(__clang__) ||                            \
+      (defined(__GNUC__) && defined(__GNUC_MINOR__) && \
+-      (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ > 8))))
++      (__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ > 8)))) && \
++      (defined(__ARM_NEON) || defined(__ARM_NEON__)))
+ 
+ #ifndef __ARM_FEATURE_CRYPTO
+ #error "Compiler option is invalid"
+diff --git a/nss/lib/freebl/rijndael.c b/nss/lib/freebl/rijndael.c
+index 26bd58ee0..6d77d942d 100644
+--- a/nss/lib/freebl/rijndael.c
++++ b/nss/lib/freebl/rijndael.c
+@@ -20,7 +20,8 @@
+ #include "gcm.h"
+ #include "mpi.h"
+ 
+-#if !defined(IS_LITTLE_ENDIAN) && !defined(NSS_X86_OR_X64)
++#if (!defined(IS_LITTLE_ENDIAN) && !defined(NSS_X86_OR_X64)) || \
++    (defined(__arm__) && !defined(__ARM_NEON) && !defined(__ARM_NEON__))
+ // not test yet on big endian platform of arm
+ #undef USE_HW_AES
+ #endif
+-- 
+2.20.1
+
diff --git a/buildroot/package/libnss/libnss.hash b/buildroot/package/libnss/libnss.hash
index 1d600f14e..518d95d84 100644
--- a/buildroot/package/libnss/libnss.hash
+++ b/buildroot/package/libnss/libnss.hash
@@ -1,4 +1,4 @@
-# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_42_1_RTM/src/SHA256SUMS
-sha256	087db37d38fd49dfd584dd2a8b5baa7fc88de7c9bd97c0c2d5be4abcafc61fc6  nss-3.42.1.tar.gz
+# From https://ftp.mozilla.org/pub/security/nss/releases/NSS_3_46_1_RTM/src/SHA256SUMS
+sha256	1ae3d1cb1de345b258788f2ef6b10a460068034c3fd64f42427a183d8342a6fb  nss-3.47.1.tar.gz
 # Locally calculated
 sha256	a20c1a32d1f8102432360b42e932869f7c11c7cdbacf9cac554c422132af47f4  nss/COPYING
diff --git a/buildroot/package/libnss/libnss.mk b/buildroot/package/libnss/libnss.mk
index 89d614fe1..cf11deaf9 100644
--- a/buildroot/package/libnss/libnss.mk
+++ b/buildroot/package/libnss/libnss.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBNSS_VERSION = 3.42.1
+LIBNSS_VERSION = 3.47.1
 LIBNSS_SOURCE = nss-$(LIBNSS_VERSION).tar.gz
 LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(subst .,_,$(LIBNSS_VERSION))_RTM/src
 LIBNSS_DISTDIR = dist
@@ -13,6 +13,14 @@ LIBNSS_DEPENDENCIES = libnspr sqlite zlib
 LIBNSS_LICENSE = MPL-2.0
 LIBNSS_LICENSE_FILES = nss/COPYING
 
+# Need to pass down TARGET_CFLAGS and TARGET_LDFLAGS
+define LIBNSS_FIXUP_LINUX_MK
+	echo 'OS_CFLAGS += $(TARGET_CFLAGS)' >> $(@D)/nss/coreconf/Linux.mk
+	echo 'LDFLAGS += $(TARGET_LDFLAGS)' >> $(@D)/nss/coreconf/Linux.mk
+endef
+
+LIBNSS_PRE_CONFIGURE_HOOKS += LIBNSS_FIXUP_LINUX_MK
+
 # --gc-sections triggers binutils ld segfault
 # https://sourceware.org/bugzilla/show_bug.cgi?id=21180
 ifeq ($(BR2_microblaze),y)
@@ -33,15 +41,14 @@ LIBNSS_BUILD_VARS = \
 	MOZILLA_CLIENT=1 \
 	NSPR_INCLUDE_DIR=$(STAGING_DIR)/usr/include/nspr \
 	NSPR_LIB_DIR=$(STAGING_DIR)/usr/lib \
-	BUILD_OPT=1 \
 	NS_USE_GCC=1 \
 	NSS_DISABLE_GTESTS=1 \
 	NSS_USE_SYSTEM_SQLITE=1 \
-	NSS_ENABLE_ECC=1 \
 	NATIVE_CC="$(HOSTCC)" \
 	OS_ARCH="Linux" \
 	OS_RELEASE="2.6" \
-	OS_TEST="$(LIBNSS_ARCH)"
+	OS_TEST="$(LIBNSS_ARCH)" \
+	NSS_ENABLE_WERROR=0
 
 # #pragma usage needs gcc >= 4.8
 # See https://bugzilla.mozilla.org/show_bug.cgi?id=1226179
@@ -102,13 +109,12 @@ HOST_LIBNSS_BUILD_VARS = \
 	MOZILLA_CLIENT=1 \
 	NSPR_INCLUDE_DIR=$(HOST_DIR)/include/nspr \
 	NSPR_LIB_DIR=$(HOST_DIR)/lib \
-	BUILD_OPT=1 \
 	NS_USE_GCC=1 \
 	NSS_DISABLE_GTESTS=1 \
 	NSS_USE_SYSTEM_SQLITE=1 \
 	SQLITE_INCLUDE_DIR=$(HOST_DIR)/include \
 	ZLIB_INCLUDE_DIR=$(HOST_DIR)/include \
-	NSS_ENABLE_ECC=1
+	NSS_ENABLE_WERROR=0
 
 HOST_LIBNSS_DEPENDENCIES = host-libnspr host-sqlite host-zlib
 
diff --git a/buildroot/package/libopenssl/libopenssl.hash b/buildroot/package/libopenssl/libopenssl.hash
index 753f447ab..1b239fbee 100644
--- a/buildroot/package/libopenssl/libopenssl.hash
+++ b/buildroot/package/libopenssl/libopenssl.hash
@@ -1,5 +1,5 @@
-# From https://www.openssl.org/source/openssl-1.1.1b.tar.gz.sha256
-sha256	f6fb3079ad15076154eda9413fed42877d668e7069d9b87396d0804fdb3f4c90	openssl-1.1.1c.tar.gz
+# From https://www.openssl.org/source/openssl-1.1.1d.tar.gz.sha256
+sha256	1e3a91bc1f9dfce01af26026f856e064eab4c8ee0a8f457b5ae30b40b8b711f2	openssl-1.1.1d.tar.gz
 
 # License files
 sha256	c32913b33252e71190af2066f08115c69bc9fddadf3bf29296e20c835389841c	LICENSE
diff --git a/buildroot/package/libopenssl/libopenssl.mk b/buildroot/package/libopenssl/libopenssl.mk
index 2a7514d59..a1bbf9a90 100644
--- a/buildroot/package/libopenssl/libopenssl.mk
+++ b/buildroot/package/libopenssl/libopenssl.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBOPENSSL_VERSION = 1.1.1c
+LIBOPENSSL_VERSION = 1.1.1d
 LIBOPENSSL_SITE = https://www.openssl.org/source
 LIBOPENSSL_SOURCE = openssl-$(LIBOPENSSL_VERSION).tar.gz
 LIBOPENSSL_LICENSE = OpenSSL or SSLeay
@@ -12,7 +12,9 @@ LIBOPENSSL_LICENSE_FILES = LICENSE
 LIBOPENSSL_INSTALL_STAGING = YES
 LIBOPENSSL_DEPENDENCIES = zlib
 HOST_LIBOPENSSL_DEPENDENCIES = host-zlib
-LIBOPENSSL_TARGET_ARCH = linux-generic32
+# no-asm is needed with generic architectures such as linux-generic32, see
+# https://github.com/openssl/openssl/issues/9839
+LIBOPENSSL_TARGET_ARCH = linux-generic32 no-asm
 LIBOPENSSL_CFLAGS = $(TARGET_CFLAGS)
 LIBOPENSSL_PROVIDES = openssl
 
@@ -55,7 +57,9 @@ endif
 
 ifeq ($(BR2_STATIC_LIBS),y)
 # Use "gcc" minimalistic target to disable DSO
-LIBOPENSSL_TARGET_ARCH = gcc
+# no-asm is needed with generic architectures such as gcc, see
+# https://github.com/openssl/openssl/issues/9839
+LIBOPENSSL_TARGET_ARCH = gcc no-asm
 else
 # Some architectures are optimized in OpenSSL
 # Doesn't work for thumb-only (Cortex-M?)
diff --git a/buildroot/package/libpcap/0001-pcap-usb-linux.c-add-missing-limits.h-for-musl-systems.patch b/buildroot/package/libpcap/0001-pcap-usb-linux.c-add-missing-limits.h-for-musl-systems.patch
deleted file mode 100644
index aabaef338..000000000
--- a/buildroot/package/libpcap/0001-pcap-usb-linux.c-add-missing-limits.h-for-musl-systems.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From aafa3512b7b742f5e66a5543e41974cc5e7eebfa Mon Sep 17 00:00:00 2001
-From: maxice8 
-Date: Sun, 22 Jul 2018 18:54:17 -0300
-Subject: [PATCH] pcap-usb-linux.c: add missing limits.h for musl systems.
-
-fix compilation on musl libc systems like Void Linux and Alpine.
-
-Signed-off-by: Fabrice Fontaine 
-[Retrieved from:
-https://github.com/the-tcpdump-group/libpcap/commit/aafa3512b7b742f5e66a5543e41974cc5e7eebfa]
----
- pcap-usb-linux.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/pcap-usb-linux.c b/pcap-usb-linux.c
-index 6f8adf65e..b92c05ea1 100644
---- a/pcap-usb-linux.c
-+++ b/pcap-usb-linux.c
-@@ -50,6 +50,7 @@
- #include 
- #include 
- #include 
-+#include 
- #include 
- #include 
- #include 
diff --git a/buildroot/package/libpcap/libpcap.hash b/buildroot/package/libpcap/libpcap.hash
index 19ce2adbe..a24fba24d 100644
--- a/buildroot/package/libpcap/libpcap.hash
+++ b/buildroot/package/libpcap/libpcap.hash
@@ -1,5 +1,5 @@
 # Locally calculated after checking pgp signature
-sha256	2edb88808e5913fdaa8e9c1fcaf272e19b2485338742b5074b9fe44d68f37019	libpcap-1.9.0.tar.gz
+sha256	635237637c5b619bcceba91900666b64d56ecb7be63f298f601ec786ce087094	libpcap-1.9.1.tar.gz
 
 # Hash for license file:
 sha256	8a54594d257e14a5260ac770f1633516cb51e3fc28c40136ce2697014eda7afd	LICENSE
diff --git a/buildroot/package/libpcap/libpcap.mk b/buildroot/package/libpcap/libpcap.mk
index ebceca527..476183555 100644
--- a/buildroot/package/libpcap/libpcap.mk
+++ b/buildroot/package/libpcap/libpcap.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBPCAP_VERSION = 1.9.0
+LIBPCAP_VERSION = 1.9.1
 LIBPCAP_SITE = http://www.tcpdump.org/release
 LIBPCAP_LICENSE = BSD-3-Clause
 LIBPCAP_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch b/buildroot/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch
new file mode 100644
index 000000000..e520dd03d
--- /dev/null
+++ b/buildroot/package/libpciaccess/0001-pciaccess.pc.in-add-Libs.Private.patch
@@ -0,0 +1,28 @@
+From e1f9fc0a11559c1200005c4bfe34cd217ec117b4 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Fri, 25 Oct 2019 19:03:32 +0200
+Subject: [PATCH] pciaccess.pc.in: add Libs.Private
+
+Add Libs.Private in pciaccess.pc.in so applications that wants to link
+statically with pciaccess will know that they have to link with its
+dependencies such as -lz
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status:
+https://gitlab.freedesktop.org/xorg/lib/libpciaccess/merge_requests/10]
+---
+ pciaccess.pc.in | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/pciaccess.pc.in b/pciaccess.pc.in
+index 706c5f7..c2da3d9 100644
+--- a/pciaccess.pc.in
++++ b/pciaccess.pc.in
+@@ -8,3 +8,4 @@ Description: Library providing generic access to the PCI bus and devices.
+ Version: @PACKAGE_VERSION@
+ Cflags: -I${includedir}
+ Libs: -L${libdir} -lpciaccess
++Libs.Private: @PCIACCESS_LIBS@
+-- 
+2.23.0
+
diff --git a/buildroot/package/libpciaccess/Config.in b/buildroot/package/libpciaccess/Config.in
index 6cc983f57..1f5d5e6be 100644
--- a/buildroot/package/libpciaccess/Config.in
+++ b/buildroot/package/libpciaccess/Config.in
@@ -2,3 +2,7 @@ config BR2_PACKAGE_LIBPCIACCESS
 	bool "libpciaccess"
 	help
 	  X.Org libpciaccess
+
+	  Generic PCI access library
+
+	  https://gitlab.freedesktop.org/xorg/lib/libpciaccess
diff --git a/buildroot/package/libpri/libpri.mk b/buildroot/package/libpri/libpri.mk
index 2e2d0e8a6..e1fa2abcf 100644
--- a/buildroot/package/libpri/libpri.mk
+++ b/buildroot/package/libpri/libpri.mk
@@ -33,7 +33,8 @@ endif
 LIBPRI_UTILS = pridump pritest rosetest testprilib
 
 define LIBPRI_BUILD_CMDS
-	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) \
+	$(TARGET_MAKE_ENV) $(MAKE1) $(TARGET_CONFIGURE_OPTS) \
+		CFLAGS="$(TARGET_CFLAGS) -fPIC" -C $(@D) \
 		$(LIBPRI_LIBS) $(LIBPRI_UTILS)
 endef
 
diff --git a/buildroot/package/librsvg/0001-librsvg.pc.in-add-libcroco-to-Requires.Private.patch b/buildroot/package/librsvg/0001-librsvg.pc.in-add-libcroco-to-Requires.Private.patch
new file mode 100644
index 000000000..0eea5b995
--- /dev/null
+++ b/buildroot/package/librsvg/0001-librsvg.pc.in-add-libcroco-to-Requires.Private.patch
@@ -0,0 +1,35 @@
+From 322b415f92d4dcd36824eef83bd617bac6e5c8c7 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Tue, 24 Dec 2019 16:38:35 +0100
+Subject: [PATCH] librsvg.pc.in: add libcroco to Requires.private
+
+libcroco is a mandatory dependency since version 2.35.0 so add it to
+Requires.Private to fix a static build failure with imagemagick
+
+This patch is not upstreamable as librsvg no longer depends on libcroco
+since version 2.47.1. It now does all CSS processing using Rust crates
+from Mozilla Servo.
+
+Fixes:
+ - http://autobuild.buildroot.org/results/42f4b4881569779162d3efe4628b934f965913b9
+
+Signed-off-by: Fabrice Fontaine 
+---
+ librsvg.pc.in | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/librsvg.pc.in b/librsvg.pc.in
+index a451de05..4b09984a 100644
+--- a/librsvg.pc.in
++++ b/librsvg.pc.in
+@@ -10,6 +10,6 @@ Name: librsvg
+ Description: library that renders svg files
+ Version: @VERSION@
+ Requires: glib-2.0 gio-2.0 gdk-pixbuf-2.0 cairo
+-Requires.private:
++Requires.private: libcroco-0.6
+ Libs: -L${libdir} -lrsvg-@RSVG_API_MAJOR_VERSION@ -lm
+ Cflags: -I${includedir}/librsvg-@RSVG_API_VERSION@
+-- 
+2.24.0
+
diff --git a/buildroot/package/librsvg/librsvg.mk b/buildroot/package/librsvg/librsvg.mk
index 4f563ce6d..470910d94 100644
--- a/buildroot/package/librsvg/librsvg.mk
+++ b/buildroot/package/librsvg/librsvg.mk
@@ -9,10 +9,12 @@ LIBRSVG_VERSION = $(LIBRSVG_VERSION_MAJOR).20
 LIBRSVG_SITE = http://ftp.gnome.org/pub/gnome/sources/librsvg/$(LIBRSVG_VERSION_MAJOR)
 LIBRSVG_SOURCE = librsvg-$(LIBRSVG_VERSION).tar.xz
 LIBRSVG_INSTALL_STAGING = YES
+LIBRSVG_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 LIBRSVG_CONF_OPTS = --disable-pixbuf-loader --disable-tools --enable-introspection=no
 HOST_LIBRSVG_CONF_OPTS = --enable-introspection=no
 LIBRSVG_DEPENDENCIES = cairo host-gdk-pixbuf gdk-pixbuf libcroco libglib2 libxml2 pango \
-	$(if $(BR2_PACKAGE_LIBGTK3),libgtk3)
+	$(if $(BR2_PACKAGE_LIBGTK3),libgtk3) \
+	$(TARGET_NLS_DEPENDENCIES)
 HOST_LIBRSVG_DEPENDENCIES = host-cairo host-gdk-pixbuf host-libcroco host-libglib2 host-libxml2 host-pango
 LIBRSVG_LICENSE = LGPL-2.0+
 LIBRSVG_LICENSE_FILES = COPYING.LIB
diff --git a/buildroot/package/libseccomp/0002-Circumvent-bug-in-uClibc-ng-syscall-on-x86_64-system.patch b/buildroot/package/libseccomp/0002-Circumvent-bug-in-uClibc-ng-syscall-on-x86_64-system.patch
new file mode 100644
index 000000000..6ac9b08a7
--- /dev/null
+++ b/buildroot/package/libseccomp/0002-Circumvent-bug-in-uClibc-ng-syscall-on-x86_64-system.patch
@@ -0,0 +1,80 @@
+From 613e601bb4b50dc359b41f162a5b629449e4bbea Mon Sep 17 00:00:00 2001
+From: Carlos Santos 
+Date: Fri, 18 Oct 2019 22:02:49 -0300
+Subject: [PATCH] Circumvent bug in uClibc-ng syscall() on x86_64 systems
+
+On uClibc at least up to v1.0.32, syscall() for x86_64 is defined in
+libc/sysdeps/linux/x86_64/syscall.S as
+
+syscall:
+        movq %rdi, %rax         /* Syscall number -> rax.  */
+        movq %rsi, %rdi         /* shift arg1 - arg5.  */
+        movq %rdx, %rsi
+        movq %rcx, %rdx
+        movq %r8, %r10
+        movq %r9, %r8
+        movq 8(%rsp),%r9        /* arg6 is on the stack.  */
+        syscall                 /* Do the system call.  */
+        cmpq $-4095, %rax       /* Check %rax for error.  */
+        jae __syscall_error     /* Branch forward if it failed.  */
+        ret                     /* Return to caller.  */
+
+And __syscall_error is defined in
+libc/sysdeps/linux/x86_64/__syscall_error.c as
+
+int __syscall_error(void) attribute_hidden;
+int __syscall_error(void)
+{
+	register int err_no __asm__ ("%rcx");
+	__asm__ ("mov %rax, %rcx\n\t"
+	         "neg %rcx");
+	__set_errno(err_no);
+	return -1;
+}
+
+Notice that __syscall_error returns -1 as a 32-bit int in %rax, a 64-bit
+register i.e. 0x00000000ffffffff (decimal 4294967295). When this value
+is compared to -1 in _sys_chk_seccomp_flag_kernel() the result is false,
+leading the function to always return 0.
+
+Prevent the error by coercing the return value of syscall() to int in a
+temporary variable before comparing it to -1. We could use just an (int)
+cast but the variable makes the code more readable and the machine code
+generated by the compiler is the same in both cases.
+
+All other syscall() invocations were inspected and they either already
+coerce the result to int or do not compare it to -1.
+
+The same problem probably occurs on other 64-bit systems but so far only
+x86_64 was tested.
+
+A bug report is being submitted to uClibc.
+
+Signed-off-by: Carlos Santos 
+---
+ src/system.c | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/src/system.c b/src/system.c
+index 8e5aafc..811b401 100644
+--- a/src/system.c
++++ b/src/system.c
+@@ -215,10 +215,12 @@ static int _sys_chk_seccomp_flag_kernel(int flag)
+ 	/* this is an invalid seccomp(2) call because the last argument
+ 	 * is NULL, but depending on the errno value of EFAULT we can
+ 	 * guess if the filter flag is supported or not */
+-	if (sys_chk_seccomp_syscall() == 1 &&
+-	    syscall(_nr_seccomp, SECCOMP_SET_MODE_FILTER, flag, NULL) == -1 &&
+-	    errno == EFAULT)
++	int rc;
++	if (sys_chk_seccomp_syscall() == 1) {
++	    rc = syscall(_nr_seccomp, SECCOMP_SET_MODE_FILTER, flag, NULL);
++	    if (rc == -1 && errno == EFAULT)
+ 		return 1;
++	}
+ 
+ 	return 0;
+ }
+-- 
+2.18.1
+
diff --git a/buildroot/package/libseccomp/libseccomp.hash b/buildroot/package/libseccomp/libseccomp.hash
index 0823903c3..39c5f8aa3 100644
--- a/buildroot/package/libseccomp/libseccomp.hash
+++ b/buildroot/package/libseccomp/libseccomp.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 b7ee0299157fb7a6a81c99f2e0d7e64429b7d7c0eae43c3a6ef91e87eeed2868 libseccomp-v2.4.0.tar.gz
+sha256 36aa502c0461ae9efc6c93ec2430d6badd9bf91ecbe73806baf7b7c6f687ab4f libseccomp-2.4.1.tar.gz
 sha256 102900208eef27b766380135906d431dba87edaa7ec6aa72e6ebd3dd67f3a97b LICENSE
diff --git a/buildroot/package/libseccomp/libseccomp.mk b/buildroot/package/libseccomp/libseccomp.mk
index 90b981f04..491e51b37 100644
--- a/buildroot/package/libseccomp/libseccomp.mk
+++ b/buildroot/package/libseccomp/libseccomp.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-LIBSECCOMP_VERSION = v2.4.0
-LIBSECCOMP_SITE = $(call github,seccomp,libseccomp,$(LIBSECCOMP_VERSION))
+LIBSECCOMP_VERSION = 2.4.1
+LIBSECCOMP_SITE = $(call github,seccomp,libseccomp,v$(LIBSECCOMP_VERSION))
 LIBSECCOMP_LICENSE = LGPL-2.1
 LIBSECCOMP_LICENSE_FILES = LICENSE
 LIBSECCOMP_INSTALL_STAGING = YES
diff --git a/buildroot/package/libsecret/Config.in b/buildroot/package/libsecret/Config.in
index 0539e5da2..04a3e46fe 100644
--- a/buildroot/package/libsecret/Config.in
+++ b/buildroot/package/libsecret/Config.in
@@ -10,7 +10,7 @@ config BR2_PACKAGE_LIBSECRET
 	  using DBus. gnome-keyring and ksecretservice are both
 	  implementations of a Secret Service.
 
-	  https://wiki.gnome.org/Libsecret
+	  https://wiki.gnome.org/Projects/Libsecret
 
 comment "libsecret needs a toolchain w/ wchar, threads"
 	depends on BR2_USE_MMU
diff --git a/buildroot/package/libsecret/libsecret.mk b/buildroot/package/libsecret/libsecret.mk
index adc7c508d..f5879fbf4 100644
--- a/buildroot/package/libsecret/libsecret.mk
+++ b/buildroot/package/libsecret/libsecret.mk
@@ -9,7 +9,8 @@ LIBSECRET_VERSION = $(LIBSECRET_VERSION_MAJOR).6
 LIBSECRET_SITE = http://ftp.gnome.org/pub/GNOME/sources/libsecret/$(LIBSECRET_VERSION_MAJOR)
 LIBSECRET_SOURCE = libsecret-$(LIBSECRET_VERSION).tar.xz
 LIBSECRET_INSTALL_STAGING = YES
-LIBSECRET_DEPENDENCIES = libglib2 host-intltool
+LIBSECRET_DEPENDENCIES = libglib2 host-intltool $(TARGET_NLS_DEPENDENCIES)
+LIBSECRET_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 LIBSECRET_CONF_OPTS = \
 	--disable-manpages \
 	--disable-strict \
diff --git a/buildroot/package/libsexy/Config.in b/buildroot/package/libsexy/Config.in
index 5d1e710c4..a2a2cc820 100644
--- a/buildroot/package/libsexy/Config.in
+++ b/buildroot/package/libsexy/Config.in
@@ -8,4 +8,4 @@ config BR2_PACKAGE_LIBSEXY
 	  GtkLabel by subclassing them and working around the
 	  limitations of the widgets.
 
-	  http://www.chipx86.com/wiki/Libsexy
+	  https://blog.chipx86.com/tag/libsexy/
diff --git a/buildroot/package/libshout/libshout.mk b/buildroot/package/libshout/libshout.mk
index 4f209081a..375ce05b4 100644
--- a/buildroot/package/libshout/libshout.mk
+++ b/buildroot/package/libshout/libshout.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 LIBSHOUT_VERSION = 2.4.1
-LIBSHOUT_SITE = http://downloads.xiph.org/releases/libshout
+LIBSHOUT_SITE = https://downloads.xiph.org/releases/libshout
 LIBSHOUT_LICENSE = LGPL-2.0+
 LIBSHOUT_LICENSE_FILES = COPYING
 LIBSHOUT_INSTALL_STAGING = YES
diff --git a/buildroot/package/libsigrok/libsigrok.hash b/buildroot/package/libsigrok/libsigrok.hash
index 7a52c6ca1..e5ab5d973 100644
--- a/buildroot/package/libsigrok/libsigrok.hash
+++ b/buildroot/package/libsigrok/libsigrok.hash
@@ -1,2 +1,3 @@
 # Locally computed
 sha256	e40fde7af98d29e922e9d3cbe0a6c0569889153fc31e47b8b1afe4d846292b9c	libsigrok-0.5.1.tar.gz
+sha256	8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903	COPYING
diff --git a/buildroot/package/libsigrok/libsigrok.mk b/buildroot/package/libsigrok/libsigrok.mk
index 5bca9ad51..aa79191e9 100644
--- a/buildroot/package/libsigrok/libsigrok.mk
+++ b/buildroot/package/libsigrok/libsigrok.mk
@@ -10,27 +10,27 @@ LIBSIGROK_LICENSE = GPL-3.0+
 LIBSIGROK_LICENSE_FILES = COPYING
 LIBSIGROK_INSTALL_STAGING = YES
 LIBSIGROK_DEPENDENCIES = libglib2 libzip host-pkgconf
-LIBSIGROK_CONF_OPTS = --disable-glibtest --disable-java --disable-python
+LIBSIGROK_CONF_OPTS = --disable-java --disable-python
 
 ifeq ($(BR2_PACKAGE_LIBSERIALPORT),y)
-LIBSIGROK_CONF_OPTS += --enable-libserialport
+LIBSIGROK_CONF_OPTS += --with-libserialport
 LIBSIGROK_DEPENDENCIES += libserialport
 else
-LIBSIGROK_CONF_OPTS += --disable-libserialport
+LIBSIGROK_CONF_OPTS += --without-libserialport
 endif
 
-ifeq ($(BR2_PACKAGE_LIBFTDI),y)
-LIBSIGROK_CONF_OPTS += --enable-libftdi
-LIBSIGROK_DEPENDENCIES += libftdi
+ifeq ($(BR2_PACKAGE_LIBFTDI1),y)
+LIBSIGROK_CONF_OPTS += --with-libftdi
+LIBSIGROK_DEPENDENCIES += libftdi1
 else
-LIBSIGROK_CONF_OPTS += --disable-libftdi
+LIBSIGROK_CONF_OPTS += --without-libftdi
 endif
 
 ifeq ($(BR2_PACKAGE_LIBUSB),y)
-LIBSIGROK_CONF_OPTS += --enable-libusb
+LIBSIGROK_CONF_OPTS += --with-libusb
 LIBSIGROK_DEPENDENCIES += libusb
 else
-LIBSIGROK_CONF_OPTS += --disable-libusb
+LIBSIGROK_CONF_OPTS += --without-libusb
 endif
 
 ifeq ($(BR2_PACKAGE_GLIBMM),y)
diff --git a/buildroot/package/libss7/libss7.mk b/buildroot/package/libss7/libss7.mk
index 541505b26..151b6a61b 100644
--- a/buildroot/package/libss7/libss7.mk
+++ b/buildroot/package/libss7/libss7.mk
@@ -36,7 +36,8 @@ endif
 LIBSS7_UTILS = parser_debug ss7test ss7linktest
 
 define LIBSS7_BUILD_CMDS
-	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) \
+	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) \
+		CFLAGS="$(TARGET_CFLAGS) -fPIC" -C $(@D) \
 		$(LIBSS7_LIBS) $(LIBSS7_UTILS)
 endef
 
diff --git a/buildroot/package/libssh/0001-buffer-Fix-size-comparison-with-count.patch b/buildroot/package/libssh/0001-buffer-Fix-size-comparison-with-count.patch
deleted file mode 100644
index 88e1bc3b4..000000000
--- a/buildroot/package/libssh/0001-buffer-Fix-size-comparison-with-count.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 2aa8c46a853acd4198af16e417ebffd5b0e2c9f4 Mon Sep 17 00:00:00 2001
-From: Andreas Schneider 
-Date: Mon, 1 Oct 2018 20:58:47 +0200
-Subject: [PATCH] buffer: Fix size comparison with count
-
-Signed-off-by: Andreas Schneider 
-Signed-off-by: Baruch Siach 
----
-Upstream status: commit 9c3ba94960cd5
-
- src/buffer.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/src/buffer.c b/src/buffer.c
-index da6e587fc9e4..b029f202660f 100644
---- a/src/buffer.c
-+++ b/src/buffer.c
-@@ -816,8 +816,8 @@ static int ssh_buffer_pack_allocate_va(struct ssh_buffer_struct *buffer,
-     ssh_string string = NULL;
-     char *cstring = NULL;
-     size_t needed_size = 0;
--    size_t count;
-     size_t len;
-+    int count; /* int for size comparison with argc */
-     int rc = SSH_OK;
- 
-     for (p = format, count = 0; *p != '\0'; p++, count++) {
-@@ -934,7 +934,7 @@ int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-     char *cstring;
-     bignum b;
-     size_t len;
--    int count;
-+    int count; /* int for size comparison with argc */
- 
-     for (p = format, count = 0; *p != '\0'; p++, count++) {
-         /* Invalid number of arguments passed */
-@@ -1098,7 +1098,7 @@ int ssh_buffer_unpack_va(struct ssh_buffer_struct *buffer,
-     } o;
-     size_t len, rlen, max_len;
-     va_list ap_copy;
--    int count;
-+    int count; /* int for size comparison with argc */
- 
-     max_len = ssh_buffer_get_len(buffer);
- 
--- 
-2.20.1
-
diff --git a/buildroot/package/libssh/0002-buffer-Use-size_t-for-argc-argument-in-ssh_buffer_-u.patch b/buildroot/package/libssh/0002-buffer-Use-size_t-for-argc-argument-in-ssh_buffer_-u.patch
deleted file mode 100644
index c86238a7a..000000000
--- a/buildroot/package/libssh/0002-buffer-Use-size_t-for-argc-argument-in-ssh_buffer_-u.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 270d6aa2bb01f3430d07cce5f97b48b741e3df9c Mon Sep 17 00:00:00 2001
-From: Andreas Schneider 
-Date: Fri, 7 Dec 2018 12:06:03 +0100
-Subject: [PATCH] buffer: Use size_t for argc argument in ssh_buffer_(un)pack()
-
-Signed-off-by: Andreas Schneider 
-Signed-off-by: Baruch Siach 
----
-Upstream status: commit c306a693f3fbe
-
- include/libssh/buffer.h |  4 ++--
- src/buffer.c            | 38 +++++++++++++++++++-------------------
- 2 files changed, 21 insertions(+), 21 deletions(-)
-
-diff --git a/include/libssh/buffer.h b/include/libssh/buffer.h
-index 4721cbe06c20..1c375343ee14 100644
---- a/include/libssh/buffer.h
-+++ b/include/libssh/buffer.h
-@@ -40,11 +40,11 @@ void *ssh_buffer_allocate(struct ssh_buffer_struct *buffer, uint32_t len);
- int ssh_buffer_allocate_size(struct ssh_buffer_struct *buffer, uint32_t len);
- int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-                        const char *format,
--                       int argc,
-+                       size_t argc,
-                        va_list ap);
- int _ssh_buffer_pack(struct ssh_buffer_struct *buffer,
-                      const char *format,
--                     int argc,
-+                     size_t argc,
-                      ...);
- #define ssh_buffer_pack(buffer, format, ...) \
-     _ssh_buffer_pack((buffer), (format), __VA_NARG__(__VA_ARGS__), __VA_ARGS__, SSH_BUFFER_PACK_END)
-diff --git a/src/buffer.c b/src/buffer.c
-index b029f202660f..99863747fc3c 100644
---- a/src/buffer.c
-+++ b/src/buffer.c
-@@ -809,7 +809,7 @@ ssh_buffer_get_ssh_string(struct ssh_buffer_struct *buffer)
-  */
- static int ssh_buffer_pack_allocate_va(struct ssh_buffer_struct *buffer,
-                                        const char *format,
--                                       int argc,
-+                                       size_t argc,
-                                        va_list ap)
- {
-     const char *p = NULL;
-@@ -817,12 +817,12 @@ static int ssh_buffer_pack_allocate_va(struct ssh_buffer_struct *buffer,
-     char *cstring = NULL;
-     size_t needed_size = 0;
-     size_t len;
--    int count; /* int for size comparison with argc */
-+    size_t count;
-     int rc = SSH_OK;
- 
-     for (p = format, count = 0; *p != '\0'; p++, count++) {
-         /* Invalid number of arguments passed */
--        if (argc != -1 && count > argc) {
-+        if (count > argc) {
-             return SSH_ERROR;
-         }
- 
-@@ -881,7 +881,7 @@ static int ssh_buffer_pack_allocate_va(struct ssh_buffer_struct *buffer,
-         }
-     }
- 
--    if (argc != -1 && argc != count) {
-+    if (argc != count) {
-         return SSH_ERROR;
-     }
- 
-@@ -891,11 +891,7 @@ static int ssh_buffer_pack_allocate_va(struct ssh_buffer_struct *buffer,
-          */
-         uint32_t canary = va_arg(ap, uint32_t);
-         if (canary != SSH_BUFFER_PACK_END) {
--            if (argc == -1){
--                return SSH_ERROR;
--            } else {
--                abort();
--            }
-+            abort();
-         }
-     }
- 
-@@ -918,7 +914,7 @@ static int ssh_buffer_pack_allocate_va(struct ssh_buffer_struct *buffer,
-  */
- int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-                        const char *format,
--                       int argc,
-+                       size_t argc,
-                        va_list ap)
- {
-     int rc = SSH_ERROR;
-@@ -934,11 +930,15 @@ int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-     char *cstring;
-     bignum b;
-     size_t len;
--    int count; /* int for size comparison with argc */
-+    size_t count;
-+
-+    if (argc > 256) {
-+        return SSH_ERROR;
-+    }
- 
-     for (p = format, count = 0; *p != '\0'; p++, count++) {
-         /* Invalid number of arguments passed */
--        if (argc != -1 && count > argc) {
-+        if (count > argc) {
-             return SSH_ERROR;
-         }
- 
-@@ -1010,7 +1010,7 @@ int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-         }
-     }
- 
--    if (argc != -1 && argc != count) {
-+    if (argc != count) {
-         return SSH_ERROR;
-     }
- 
-@@ -1018,11 +1018,7 @@ int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-         /* Check if our canary is intact, if not somthing really bad happened */
-         uint32_t canary = va_arg(ap, uint32_t);
-         if (canary != SSH_BUFFER_PACK_END) {
--            if (argc == -1){
--                return SSH_ERROR;
--            } else {
--                abort();
--            }
-+            abort();
-         }
-     }
-     return rc;
-@@ -1050,12 +1046,16 @@ int ssh_buffer_pack_va(struct ssh_buffer_struct *buffer,
-  */
- int _ssh_buffer_pack(struct ssh_buffer_struct *buffer,
-                      const char *format,
--                     int argc,
-+                     size_t argc,
-                      ...)
- {
-     va_list ap;
-     int rc;
- 
-+    if (argc > 256) {
-+        return SSH_ERROR;
-+    }
-+
-     va_start(ap, argc);
-     rc = ssh_buffer_pack_allocate_va(buffer, format, argc, ap);
-     va_end(ap);
--- 
-2.20.1
-
diff --git a/buildroot/package/libssh/0003-more-strict-overflow-fixes.patch b/buildroot/package/libssh/0003-more-strict-overflow-fixes.patch
deleted file mode 100644
index 6232ee77e..000000000
--- a/buildroot/package/libssh/0003-more-strict-overflow-fixes.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 7656b1be8dc5425d5af03ffa6af711599fc07e80 Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Tue, 22 Jan 2019 08:16:50 +0200
-Subject: [PATCH] buffer: Convert argc to size_t in ssh_buffer_unpack() as well
-
-Commit c306a693f3fb ("buffer: Use size_t for argc argument in
-ssh_buffer_(un)pack()") mentioned unpack in the commit log, but it only
-touches the pack variants. Extend the conversion to unpack.
-
-Pre-initialize the p pointer to avoid possible use before
-initialization in case of early argc check failure.
-
-This fixes build failure:
-
-.../libssh-0.8.6/src/buffer.c: In function 'ssh_buffer_unpack_va':
-.../libssh-0.8.6/src/buffer.c:1229:16: error: assuming signed overflow does not occur when simplifying conditional to constant [-Werror=strict-overflow]
-             if (argc == -1){
-		^
-
-Signed-off-by: Baruch Siach 
----
-Upstream status: https://www.libssh.org/archive/libssh/2019-01/0000032.html
-
- include/libssh/buffer.h |  4 ++--
- src/buffer.c            | 25 +++++++++++++------------
- 2 files changed, 15 insertions(+), 14 deletions(-)
-
-diff --git a/include/libssh/buffer.h b/include/libssh/buffer.h
-index 1c375343ee14..cd2dea6a7ecc 100644
---- a/include/libssh/buffer.h
-+++ b/include/libssh/buffer.h
-@@ -50,11 +50,11 @@ int _ssh_buffer_pack(struct ssh_buffer_struct *buffer,
-     _ssh_buffer_pack((buffer), (format), __VA_NARG__(__VA_ARGS__), __VA_ARGS__, SSH_BUFFER_PACK_END)
- 
- int ssh_buffer_unpack_va(struct ssh_buffer_struct *buffer,
--                         const char *format, int argc,
-+                         const char *format, size_t argc,
-                          va_list ap);
- int _ssh_buffer_unpack(struct ssh_buffer_struct *buffer,
-                        const char *format,
--                       int argc,
-+                       size_t argc,
-                        ...);
- #define ssh_buffer_unpack(buffer, format, ...) \
-     _ssh_buffer_unpack((buffer), (format), __VA_NARG__(__VA_ARGS__), __VA_ARGS__, SSH_BUFFER_PACK_END)
-diff --git a/src/buffer.c b/src/buffer.c
-index 99863747fc3c..c8ad20f24e43 100644
---- a/src/buffer.c
-+++ b/src/buffer.c
-@@ -1082,11 +1082,11 @@ int _ssh_buffer_pack(struct ssh_buffer_struct *buffer,
-  */
- int ssh_buffer_unpack_va(struct ssh_buffer_struct *buffer,
-                          const char *format,
--                         int argc,
-+                         size_t argc,
-                          va_list ap)
- {
-     int rc = SSH_ERROR;
--    const char *p, *last;
-+    const char *p = format, *last;
-     union {
-         uint8_t *byte;
-         uint16_t *word;
-@@ -1098,16 +1098,21 @@ int ssh_buffer_unpack_va(struct ssh_buffer_struct *buffer,
-     } o;
-     size_t len, rlen, max_len;
-     va_list ap_copy;
--    int count; /* int for size comparison with argc */
-+    size_t count;
- 
-     max_len = ssh_buffer_get_len(buffer);
- 
-     /* copy the argument list in case a rollback is needed */
-     va_copy(ap_copy, ap);
- 
--    for (p = format, count = 0; *p != '\0'; p++, count++) {
-+    if (argc > 256) {
-+        rc = SSH_ERROR;
-+        goto cleanup;
-+    }
-+
-+    for (count = 0; *p != '\0'; p++, count++) {
-         /* Invalid number of arguments passed */
--        if (argc != -1 && count > argc) {
-+        if (count > argc) {
-             rc = SSH_ERROR;
-             goto cleanup;
-         }
-@@ -1217,7 +1222,7 @@ int ssh_buffer_unpack_va(struct ssh_buffer_struct *buffer,
-         }
-     }
- 
--    if (argc != -1 && argc != count) {
-+    if (argc != count) {
-         rc = SSH_ERROR;
-     }
- 
-@@ -1226,11 +1231,7 @@ cleanup:
-         /* Check if our canary is intact, if not something really bad happened */
-         uint32_t canary = va_arg(ap, uint32_t);
-         if (canary != SSH_BUFFER_PACK_END){
--            if (argc == -1){
--                rc = SSH_ERROR;
--            } else {
--                abort();
--            }
-+            abort();
-         }
-     }
- 
-@@ -1320,7 +1321,7 @@ cleanup:
-  */
- int _ssh_buffer_unpack(struct ssh_buffer_struct *buffer,
-                        const char *format,
--                       int argc,
-+                       size_t argc,
-                        ...)
- {
-     va_list ap;
--- 
-2.20.1
-
diff --git a/buildroot/package/libssh/libssh.hash b/buildroot/package/libssh/libssh.hash
index 7164c9106..ca296701b 100644
--- a/buildroot/package/libssh/libssh.hash
+++ b/buildroot/package/libssh/libssh.hash
@@ -1,5 +1,5 @@
 # Locally calculated after checking pgp signature
-# https://www.libssh.org/files/0.8/libssh-0.8.7.tar.xz.asc
+# https://www.libssh.org/files/0.9/libssh-0.9.3.tar.xz.asc
 # with key 8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D
-sha256 43304ca22f0ba0b654e14b574a39816bc70212fdea5858a6637cc26cade3d592  libssh-0.8.7.tar.xz
+sha256 2c8b5f894dced58b3d629f16f3afa6562c20b4bdc894639163cf657833688f0c  libssh-0.9.3.tar.xz
 sha256 1656186e951db1c010a8485481fa94587f7e53a26d24976bef97945ad0c4df5a  COPYING
diff --git a/buildroot/package/libssh/libssh.mk b/buildroot/package/libssh/libssh.mk
index 332f2a570..ce0defa47 100644
--- a/buildroot/package/libssh/libssh.mk
+++ b/buildroot/package/libssh/libssh.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-LIBSSH_VERSION_MAJOR = 0.8
-LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).7
+LIBSSH_VERSION_MAJOR = 0.9
+LIBSSH_VERSION = $(LIBSSH_VERSION_MAJOR).3
 LIBSSH_SOURCE = libssh-$(LIBSSH_VERSION).tar.xz
 LIBSSH_SITE = https://www.libssh.org/files/$(LIBSSH_VERSION_MAJOR)
 LIBSSH_LICENSE = LGPL-2.1
diff --git a/buildroot/package/libssh2/0001-drop-custom-buildconf-script.patch b/buildroot/package/libssh2/0001-drop-custom-buildconf-script.patch
index a9a98e083..bf187b26a 100644
--- a/buildroot/package/libssh2/0001-drop-custom-buildconf-script.patch
+++ b/buildroot/package/libssh2/0001-drop-custom-buildconf-script.patch
@@ -29,6 +29,8 @@ Update gitignore accordingly, too.
 
 Signed-off-by: "Yann E. MORIN" 
 Cc: Sam Voss 
+[Fabrice: Remove .gitignore so patch applies on 1.9.0]
+Signed-off-by: Fabrice Fontaine 
 ---
  .gitignore          |  2 ++
  buildconf           | 24 +++++-------------------
@@ -37,19 +39,6 @@ Cc: Sam Voss 
  example/Makefile.am |  2 +-
  5 files changed, 9 insertions(+), 23 deletions(-)
 
-diff --git a/.gitignore b/.gitignore
-index 997e51e1..b6d6b5cb 100644
---- a/.gitignore
-+++ b/.gitignore
-@@ -13,6 +13,8 @@ Makefile
- Makefile.in
- aclocal.m4
- autom4te.cache
-+compile
-+test-driver
- config.guess
- config.log
- config.status
 diff --git a/buildconf b/buildconf
 index 558dcb66..728b3397 100755
 --- a/buildconf
@@ -95,19 +84,6 @@ index c6ff7535..6939d0d6 100644
  AM_MAINTAINER_MODE
  m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
  
-diff --git a/example/.gitignore b/example/.gitignore
-index 13448191..cac152b8 100644
---- a/example/.gitignore
-+++ b/example/.gitignore
-@@ -20,8 +20,6 @@ sftp_write_nonblock
- config.h.in
- ssh2_exec
- ssh2_agent
--libssh2_config.h
--libssh2_config.h.in
- stamp-h2
- sftp_append
- sftp_write_sliding
 diff --git a/example/Makefile.am b/example/Makefile.am
 index 5cf5f071..41f65b12 100644
 --- a/example/Makefile.am
diff --git a/buildroot/package/libssh2/libssh2.hash b/buildroot/package/libssh2/libssh2.hash
index c4732a2c0..8e048ff50 100644
--- a/buildroot/package/libssh2/libssh2.hash
+++ b/buildroot/package/libssh2/libssh2.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 468e7a81a8121c06cb099eef2e17106b0b8c2e1d890b1c0e34e1951f182babb1  libssh2-1b3cbaff518f32e5b70650d4b7b52361b1410d37.tar.gz
+sha256 d5fb8bd563305fd1074dda90bd053fb2d29fc4bce048d182f96eaa466dfadafd  libssh2-1.9.0.tar.gz
 sha256 e15ed284a15e80115467d6d7f030f0d89d8fabbecd78fb6e0f861f0cfc128fd9  COPYING
diff --git a/buildroot/package/libssh2/libssh2.mk b/buildroot/package/libssh2/libssh2.mk
index abee1f8c7..bd8517dac 100644
--- a/buildroot/package/libssh2/libssh2.mk
+++ b/buildroot/package/libssh2/libssh2.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-LIBSSH2_VERSION = 1b3cbaff518f32e5b70650d4b7b52361b1410d37
-LIBSSH2_SITE = $(call github,libssh2,libssh2,$(LIBSSH2_VERSION))
+LIBSSH2_VERSION = 1.9.0
+LIBSSH2_SITE = https://www.libssh2.org/download
 LIBSSH2_LICENSE = BSD
 LIBSSH2_LICENSE_FILES = COPYING
 LIBSSH2_INSTALL_STAGING = YES
diff --git a/buildroot/package/libstrophe/libstrophe.hash b/buildroot/package/libstrophe/libstrophe.hash
index 72eb38652..1e46a82bc 100644
--- a/buildroot/package/libstrophe/libstrophe.hash
+++ b/buildroot/package/libstrophe/libstrophe.hash
@@ -1,4 +1,4 @@
 # Locally calculated
-sha256 158145bc1565a5fd0bbd7f57e3e15d768e58b8a460897ab5918a5a689d67ae6f  libstrophe-0.9.2.tar.gz
+sha256 8a3b79f62177ed59c01d4d4108357ff20bd933d53b845ee4e350d304c051a4fe  libstrophe-0.9.3.tar.gz
 sha256 82476f36ffd5e895a176013c0812166ba7b7d99f3d536fc7f5ed2e33e9f74a08  MIT-LICENSE.txt
 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903  GPL-LICENSE.txt
diff --git a/buildroot/package/libstrophe/libstrophe.mk b/buildroot/package/libstrophe/libstrophe.mk
index 7445caa67..d5434f503 100644
--- a/buildroot/package/libstrophe/libstrophe.mk
+++ b/buildroot/package/libstrophe/libstrophe.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBSTROPHE_VERSION = 0.9.2
+LIBSTROPHE_VERSION = 0.9.3
 LIBSTROPHE_SITE = $(call github,strophe,libstrophe,$(LIBSTROPHE_VERSION))
 LIBSTROPHE_DEPENDENCIES = openssl host-pkgconf
 # Doesn't ship configure
diff --git a/buildroot/package/libsvgtiny/libsvgtiny.hash b/buildroot/package/libsvgtiny/libsvgtiny.hash
index fce379535..86096cef3 100644
--- a/buildroot/package/libsvgtiny/libsvgtiny.hash
+++ b/buildroot/package/libsvgtiny/libsvgtiny.hash
@@ -1,2 +1,3 @@
 # Locally computed
 sha256 082a2e8849f05e2364a942eec51a798d637c6eca44db8c73350a038ebd1fd268  libsvgtiny-ea9d99fc8b231c22d06168135e181d61f4eb2f06.tar.gz
+sha256 92b965c77be71661cae51425a6b40a5ca274f44cc13c723c90fb471a9a26a828  README
diff --git a/buildroot/package/libsvgtiny/libsvgtiny.mk b/buildroot/package/libsvgtiny/libsvgtiny.mk
index febd3fcec..fe7dc0a6d 100644
--- a/buildroot/package/libsvgtiny/libsvgtiny.mk
+++ b/buildroot/package/libsvgtiny/libsvgtiny.mk
@@ -12,6 +12,8 @@ LIBSVGTINY_DEPENDENCIES = \
 	libxml2 host-gperf host-pkgconf host-netsurf-buildsystem
 LIBSVGTINY_LICENSE = MIT
 LIBSVGTINY_LICENSE_FILES = README
+# Package does not build in parallel due to improper make rules
+LIBSVGTINY_MAKE = $(MAKE1)
 
 # The libsvgtiny build system cannot build both the shared and static
 # libraries. So when the Buildroot configuration requests to build
diff --git a/buildroot/package/libtomcrypt/0001-fix-CVE-2019-17362.patch b/buildroot/package/libtomcrypt/0001-fix-CVE-2019-17362.patch
new file mode 100644
index 000000000..91e214585
--- /dev/null
+++ b/buildroot/package/libtomcrypt/0001-fix-CVE-2019-17362.patch
@@ -0,0 +1,29 @@
+From 25c26a3b7a9ad8192ccc923e15cf62bf0108ef94 Mon Sep 17 00:00:00 2001
+From: werew 
+Date: Thu, 3 Oct 2019 19:57:10 +0200
+Subject: [PATCH] Fixes #507
+
+Fix a vulnerability in der_decode_utf8_string as specified here:
+https://github.com/libtom/libtomcrypt/issues/507
+
+[for import into Buildroot]
+Signed-off-by: Thomas De Schampheleire 
+
+
+---
+ src/pk/asn1/der/utf8/der_decode_utf8_string.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/pk/asn1/der/utf8/der_decode_utf8_string.c b/src/pk/asn1/der/utf8/der_decode_utf8_string.c
+index 94555b99f..d3ed82bea 100644
+--- a/src/pk/asn1/der/utf8/der_decode_utf8_string.c
++++ b/src/pk/asn1/der/utf8/der_decode_utf8_string.c
+@@ -65,7 +65,7 @@ int der_decode_utf8_string(const unsigned char *in,  unsigned long inlen,
+       /* count number of bytes */
+       for (z = 0; (tmp & 0x80) && (z <= 4); z++, tmp = (tmp << 1) & 0xFF);
+ 
+-      if (z > 4 || (x + (z - 1) > inlen)) {
++      if (z == 1 || z > 4 || (x + (z - 1) > inlen)) {
+          return CRYPT_INVALID_PACKET;
+       }
+ 
diff --git a/buildroot/package/libtorrent/0001-libtorrent.pc.in-add-Libs.Private.patch b/buildroot/package/libtorrent/0001-libtorrent.pc.in-add-Libs.Private.patch
new file mode 100644
index 000000000..7d363d293
--- /dev/null
+++ b/buildroot/package/libtorrent/0001-libtorrent.pc.in-add-Libs.Private.patch
@@ -0,0 +1,30 @@
+From a86219e725441eb87321fa3e24531dafa54ee674 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Sun, 20 Oct 2019 20:23:19 +0200
+Subject: [PATCH] libtorrent.pc.in: add Libs.Private
+
+Add Libs.Private: -lz so applications that want to link statically with
+libtorrent (such as rtorrent) will know that they must link with -lz
+
+Fixes:
+ - http://autobuild.buildroot.org/results/075598e1699c2ac20a4dfbcb5695bbb7343f9a86
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status: https://github.com/rakshasa/libtorrent/pull/202]
+---
+ libtorrent.pc.in | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/libtorrent.pc.in b/libtorrent.pc.in
+index cf6612bc..6108f7e9 100644
+--- a/libtorrent.pc.in
++++ b/libtorrent.pc.in
+@@ -7,4 +7,5 @@ Name: libtorrent
+ Description: A BitTorrent library
+ Version: @VERSION@
+ Libs: -L${libdir} -ltorrent
++Libs.Private: -lz
+ Cflags: -I${includedir}
+-- 
+2.23.0
+
diff --git a/buildroot/package/libuio/libuio.mk b/buildroot/package/libuio/libuio.mk
index 13429ec0f..b6e8e7e77 100644
--- a/buildroot/package/libuio/libuio.mk
+++ b/buildroot/package/libuio/libuio.mk
@@ -10,7 +10,7 @@ LIBUIO_SITE = $(call github,Linutronix,libuio,$(LIBUIO_VERSION))
 LIBUIO_LICENSE = LGPL-2.1 (library), GPL-2.0 (programs)
 LIBUIO_LICENSE_FILES = COPYING
 LIBUIO_CONF_OPTS = --with-glib=no --without-werror
-LIBUIO_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES)
+LIBUIO_DEPENDENCIES = $(TARGET_NLS_DEPENDENCIES) host-pkgconf
 LIBUIO_LIBS = $(TARGET_NLS_LIBS)
 LIBUIO_INSTALL_STAGING = YES
 
diff --git a/buildroot/package/libunwind/libunwind.mk b/buildroot/package/libunwind/libunwind.mk
index 7adf31896..7469b789e 100644
--- a/buildroot/package/libunwind/libunwind.mk
+++ b/buildroot/package/libunwind/libunwind.mk
@@ -11,7 +11,9 @@ LIBUNWIND_LICENSE_FILES = COPYING
 LIBUNWIND_LICENSE = MIT
 LIBUNWIND_AUTORECONF = YES
 
-LIBUNWIND_CONF_OPTS = --disable-tests
+LIBUNWIND_CONF_OPTS = \
+	--disable-tests \
+	$(if $(BR2_INSTALL_LIBSTDCPP),--enable-cxx-exceptions,--disable-cxx-exceptions)
 
 ifeq ($(BR2_PACKAGE_LIBATOMIC_OPS),y)
 LIBUNWIND_DEPENDENCIES = libatomic_ops
diff --git a/buildroot/package/libvips/libvips.mk b/buildroot/package/libvips/libvips.mk
index 7622f32fb..72fcf6003 100644
--- a/buildroot/package/libvips/libvips.mk
+++ b/buildroot/package/libvips/libvips.mk
@@ -20,7 +20,8 @@ ifeq ($(BR2_sparc64),y)
 LIBVIPS_CXXFLAGS += -O0
 endif
 
-LIBVIPS_CONF_ENV += CXXFLAGS="$(TARGET_CXXFLAGS) $(LIBVIPS_CXXFLAGS)"
+LIBVIPS_CONF_ENV += CXXFLAGS="$(TARGET_CXXFLAGS) $(LIBVIPS_CXXFLAGS)" \
+	LIBS=$(TARGET_NLS_LIBS)
 
 LIBVIPS_CONF_OPTS = \
 	--disable-introspection \
diff --git a/buildroot/package/libvncserver/Config.in b/buildroot/package/libvncserver/Config.in
index 460aa784e..d5fac82e8 100644
--- a/buildroot/package/libvncserver/Config.in
+++ b/buildroot/package/libvncserver/Config.in
@@ -6,7 +6,7 @@ config BR2_PACKAGE_LIBVNCSERVER
 	help
 	  libvncserver is a VNC server/client library.
 
-	  http://libvncserver.sourceforge.net/
+	  https://libvnc.github.io/
 
 if BR2_PACKAGE_LIBVNCSERVER
 
diff --git a/buildroot/package/libvorbis/Config.in b/buildroot/package/libvorbis/Config.in
index 3d5b5d6d6..1b7cd6c3b 100644
--- a/buildroot/package/libvorbis/Config.in
+++ b/buildroot/package/libvorbis/Config.in
@@ -13,3 +13,5 @@ config BR2_PACKAGE_LIBVORBIS
 	  representations such as MPEG-4 (AAC), and similar to, but
 	  higher performance than MPEG-1/2 audio layer 3, MPEG-4 audio
 	  (TwinVQ), WMA and PAC.
+
+	  https://xiph.org/vorbis/
diff --git a/buildroot/package/linux-fusion/Config.in b/buildroot/package/linux-fusion/Config.in
index ed8bd6ad4..14b4f946a 100644
--- a/buildroot/package/linux-fusion/Config.in
+++ b/buildroot/package/linux-fusion/Config.in
@@ -8,3 +8,5 @@ config BR2_PACKAGE_LINUX_FUSION
 	help
 	  DirectFB Communication Layer allowing multiple DirectFB
 	  applications to run concurrently
+
+	  https://github.com/deniskropp/linux-fusion
diff --git a/buildroot/package/linux-headers/Config.in.host b/buildroot/package/linux-headers/Config.in.host
index d092da2fb..485f67e5a 100644
--- a/buildroot/package/linux-headers/Config.in.host
+++ b/buildroot/package/linux-headers/Config.in.host
@@ -116,6 +116,10 @@ choice
 	  This is used to hide/show some packages that have strict
 	  requirements on the version of kernel headers.
 
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4
+	bool "5.4.x"
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
+
 config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_20
 	bool "4.20.x"
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20
@@ -287,10 +291,10 @@ endchoice
 
 config BR2_DEFAULT_KERNEL_HEADERS
 	string
-	default "4.4.180"	if BR2_KERNEL_HEADERS_4_4
-	default "4.9.180"	if BR2_KERNEL_HEADERS_4_9
-	default "4.14.123"	if BR2_KERNEL_HEADERS_4_14
-	default "4.19.47"	if BR2_KERNEL_HEADERS_4_19
+	default "4.4.208"	if BR2_KERNEL_HEADERS_4_4
+	default "4.9.208"	if BR2_KERNEL_HEADERS_4_9
+	default "4.14.163"	if BR2_KERNEL_HEADERS_4_14
+	default "4.19.94"	if BR2_KERNEL_HEADERS_4_19
 	default "4.20.17"	if BR2_KERNEL_HEADERS_4_20
 	default BR2_DEFAULT_KERNEL_VERSION if BR2_KERNEL_HEADERS_VERSION
 	default "custom"	if BR2_KERNEL_HEADERS_CUSTOM_TARBALL
diff --git a/buildroot/package/linux-headers/linux-headers.mk b/buildroot/package/linux-headers/linux-headers.mk
index 95432ade8..676c8c44e 100644
--- a/buildroot/package/linux-headers/linux-headers.mk
+++ b/buildroot/package/linux-headers/linux-headers.mk
@@ -60,7 +60,8 @@ endif # LINUX_HEADERS_CUSTOM_TARBALL
 # Apply any necessary patches if we are using the headers from a kernel
 # build.
 ifeq ($(BR2_KERNEL_HEADERS_AS_KERNEL),y)
-LINUX_HEADERS_PATCHES = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH))
+LINUX_HEADERS_PATCHES = $(call qstrip,$(BR2_LINUX_KERNEL_PATCH)) \
+	$(wildcard $(addsuffix /linux,$(call qstrip,$(BR2_GLOBAL_PATCH_DIR))))
 
 # We rely on the generic package infrastructure to download and apply
 # remote patches (downloaded from ftp, http or https). For local
@@ -132,6 +133,7 @@ endef
 ifeq ($(BR2_KERNEL_HEADERS_VERSION)$(BR2_KERNEL_HEADERS_AS_KERNEL)$(BR2_KERNEL_HEADERS_CUSTOM_TARBALL)$(BR2_KERNEL_HEADERS_CUSTOM_GIT),y)
 define LINUX_HEADERS_CHECK_VERSION
 	$(call check_kernel_headers_version,\
+		$(BUILD_DIR),\
 		$(STAGING_DIR),\
 		$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST)))
 endef
diff --git a/buildroot/package/linux-tools/Config.in b/buildroot/package/linux-tools/Config.in
index 1c660f76f..ab8cc3891 100644
--- a/buildroot/package/linux-tools/Config.in
+++ b/buildroot/package/linux-tools/Config.in
@@ -82,6 +82,7 @@ config BR2_PACKAGE_LINUX_TOOLS_SELFTESTS
 	bool"selftests"
 	depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS # bash
 	depends on BR2_USE_MMU  # bash
+	depends on !BR2_STATIC_LIBS
 	select BR2_PACKAGE_LINUX_TOOLS
 	select BR2_PACKAGE_BASH # runtime
 	select BR2_PACKAGE_NCURSES
@@ -103,9 +104,9 @@ config BR2_PACKAGE_LINUX_TOOLS_SELFTESTS
 	  This is very much a use at your risk option and may not work
 	  for every setup or every architecture.
 
-comment "selftests needs BR2_PACKAGE_BUSYBOX_SHOW_OTHERS"
+comment "selftests needs BR2_PACKAGE_BUSYBOX_SHOW_OTHERS and a toolchain w/ dynamic library"
 	depends on BR2_USE_MMU
-	depends on !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
+	depends on !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS || BR2_STATIC_LIBS
 
 config BR2_PACKAGE_LINUX_TOOLS_TMON
 	bool "tmon"
diff --git a/buildroot/package/lirc-tools/lirc-tools.mk b/buildroot/package/lirc-tools/lirc-tools.mk
index e468f2a25..d66f4e992 100644
--- a/buildroot/package/lirc-tools/lirc-tools.mk
+++ b/buildroot/package/lirc-tools/lirc-tools.mk
@@ -47,7 +47,7 @@ endif
 
 ifeq ($(BR2_PACKAGE_PYTHON3),y)
 LIRC_TOOLS_DEPENDENCIES += python3 host-python3-setuptools
-LIRC_TOOLS_MAKE_ENV += SETUPTOOLS_ENV="$(PKG_PYTHON_SETUPTOOLS_ENV)"
+LIRC_TOOLS_MAKE_ENV += SETUPTOOLS_ENV='$(PKG_PYTHON_SETUPTOOLS_ENV)'
 endif
 
 define LIRC_TOOLS_INSTALL_INIT_SYSV
diff --git a/buildroot/package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch b/buildroot/package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch
new file mode 100644
index 000000000..b7e1dc64d
--- /dev/null
+++ b/buildroot/package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch
@@ -0,0 +1,28 @@
+From 02a538c2b4b54b41d23dbd7668714ea4d2016131 Mon Sep 17 00:00:00 2001
+From: Markus Mayer 
+Date: Thu, 13 Jun 2019 12:27:04 -0700
+Subject: [PATCH] scripts/build: use /bin/bash as shell
+
+scripts/build makes use of the "+=" operator which is not supported by
+/bin/sh. We switch to /bin/bash in order to avoid errors of the form
+
+    ../scripts/build: 21: ../scripts/build: LDLIBS+= -lm: not found
+
+Signed-off-by: Markus Mayer 
+---
+ scripts/build | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/build b/scripts/build
+index 34a1371d0056..60b755cd2320 100755
+--- a/scripts/build
++++ b/scripts/build
+@@ -1,4 +1,4 @@
+-#!/bin/sh
++#!/bin/bash
+ 
+ CC=${CC-`../scripts/compiler`}
+ MAKE=${MAKE-`../scripts/make`}
+-- 
+2.17.1
+
diff --git a/buildroot/package/lmbench/0002-src-Makefile-add-lmbench-to-list-of-executables.patch b/buildroot/package/lmbench/0002-src-Makefile-add-lmbench-to-list-of-executables.patch
new file mode 100644
index 000000000..f5067a6b0
--- /dev/null
+++ b/buildroot/package/lmbench/0002-src-Makefile-add-lmbench-to-list-of-executables.patch
@@ -0,0 +1,29 @@
+From c158a02561c64d0cd236f86db24cc20d0378eb72 Mon Sep 17 00:00:00 2001
+From: Markus Mayer 
+Date: Thu, 13 Jun 2019 12:28:54 -0700
+Subject: [PATCH] src/Makefile: add lmbench to list of executables
+
+We want to install the lmbench script along with the other executables,
+so we add it to the appropriate list.
+
+Signed-off-by: Markus Mayer 
+---
+ src/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/Makefile b/src/Makefile
+index 4962815b5fe7..70dbc6794898 100644
+--- a/src/Makefile
++++ b/src/Makefile
+@@ -98,7 +98,7 @@ EXES =	$O/bw_file_rd $O/bw_mem $O/bw_mmap_rd $O/bw_pipe $O/bw_tcp 	\
+ 	$O/lat_select $O/lat_pipe $O/lat_rpc $O/lat_syscall $O/lat_tcp	\
+ 	$O/lat_udp $O/lat_mmap $O/mhz $O/lat_proc $O/lat_pagefault	\
+ 	$O/lat_connect $O/lat_fs $O/lat_sig $O/lat_mem_rd $O/lat_ctx	\
+-	$O/lat_sem 							\
++	$O/lat_sem $O/lmbench						\
+ 	$O/memsize $O/lat_unix $O/lmdd $O/timing_o $O/enough		\
+ 	$O/msleep $O/loop_o $O/lat_fifo $O/lmhttp $O/lat_http		\
+ 	$O/lat_fcntl $O/disk $O/lat_unix_connect $O/flushdisk		\
+-- 
+2.17.1
+
diff --git a/buildroot/package/lmbench/lmbench.mk b/buildroot/package/lmbench/lmbench.mk
index c52d6a5a3..2f3b19b5f 100644
--- a/buildroot/package/lmbench/lmbench.mk
+++ b/buildroot/package/lmbench/lmbench.mk
@@ -18,8 +18,9 @@ LMBENCH_CFLAGS += `$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc`
 LMBENCH_LDLIBS = `$(PKG_CONFIG_HOST_BINARY) --libs libtirpc`
 endif
 
+LMBENCH_POST_PATCH_HOOKS += UPDATE_CONFIG_HOOK
+
 define LMBENCH_CONFIGURE_CMDS
-	$(call CONFIG_UPDATE,$(@D))
 	sed -i 's/CFLAGS=/CFLAGS+=/g' $(@D)/src/Makefile
 	sed -i 's/LDLIBS=/LDLIBS+=/g' $(@D)/scripts/build
 	sed -i '/cd .*doc/d' $(@D)/src/Makefile
diff --git a/buildroot/package/logrotate/logrotate.hash b/buildroot/package/logrotate/logrotate.hash
index 70b068c67..bebbd7465 100644
--- a/buildroot/package/logrotate/logrotate.hash
+++ b/buildroot/package/logrotate/logrotate.hash
@@ -1,2 +1,3 @@
 # Locally calculated
 sha256 fb1ff8502e7ae4aedaa3d0da8d3740a6a0f44b72e34666af724e9094b166c942  logrotate-3.13.0.tar.gz
+sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
diff --git a/buildroot/package/lua-sdl2/lua-sdl2.mk b/buildroot/package/lua-sdl2/lua-sdl2.mk
index 31375997b..ef3ede9cc 100644
--- a/buildroot/package/lua-sdl2/lua-sdl2.mk
+++ b/buildroot/package/lua-sdl2/lua-sdl2.mk
@@ -10,7 +10,15 @@ LUA_SDL2_LICENSE = ISC
 LUA_SDL2_LICENSE_FILES = LICENSE
 LUA_SDL2_DEPENDENCIES = luainterpreter sdl2
 
-LUA_SDL2_CONF_OPTS += -DWITH_LUAVER=user -DLUA_INCLUDE_DIR=$(STAGING_DIR)/usr/include
+ifeq ($(BR2_PACKAGE_LUAJIT),y)
+LUA_SDL2_LUAVER = JIT
+else ifeq ($(BR2_PACKAGE_LUA_5_3),y)
+LUA_SDL2_LUAVER = 53
+else
+LUA_SDL2_LUAVER = 51
+endif
+
+LUA_SDL2_CONF_OPTS += -DWITH_LUAVER=$(LUA_SDL2_LUAVER) -DLUA_INCLUDE_DIR=$(STAGING_DIR)/usr/include
 
 ifeq ($(BR2_PACKAGE_SDL2_IMAGE),y)
 LUA_SDL2_DEPENDENCIES += sdl2_image
diff --git a/buildroot/package/luasql-sqlite3/Config.in b/buildroot/package/luasql-sqlite3/Config.in
index cc4d3d545..3a1fc6ba6 100644
--- a/buildroot/package/luasql-sqlite3/Config.in
+++ b/buildroot/package/luasql-sqlite3/Config.in
@@ -4,4 +4,4 @@ config BR2_PACKAGE_LUASQL_SQLITE3
 	help
 	  LuaSQL is a simple interface from Lua to a DBMS.
 
-	  http://www.keplerproject.org/luasql
+	  http://keplerproject.github.io/luasql/
diff --git a/buildroot/package/luksmeta/luksmeta.hash b/buildroot/package/luksmeta/luksmeta.hash
index f5d756405..7e252294b 100644
--- a/buildroot/package/luksmeta/luksmeta.hash
+++ b/buildroot/package/luksmeta/luksmeta.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 0154af98e7302a172060d83d24b6d87557a822c39ba3e911461bb1a6d3a22d51  luksmeta-8.tar.bz2
+sha256 2ca0c35b551b331ba1444fc9d36e8c48ff8cae53dd4e6155b028e8904edc202a  luksmeta-9.tar.bz2
 sha256 4b72eb6b5a336cd3ec837cc2d6347c23bf7574168db6b4802267700b93021abf  COPYING
diff --git a/buildroot/package/luksmeta/luksmeta.mk b/buildroot/package/luksmeta/luksmeta.mk
index 33671e469..129713aec 100644
--- a/buildroot/package/luksmeta/luksmeta.mk
+++ b/buildroot/package/luksmeta/luksmeta.mk
@@ -4,12 +4,13 @@
 #
 ################################################################################
 
-LUKSMETA_VERSION = 8
+LUKSMETA_VERSION = 9
 LUKSMETA_SOURCE = luksmeta-$(LUKSMETA_VERSION).tar.bz2
 LUKSMETA_SITE = https://github.com/latchset/luksmeta/releases/download/v$(LUKSMETA_VERSION)
 LUKSMETA_LICENSE = LGPL-2.1+
 LUKSMETA_LICENSE_FILES = COPYING
 LUKSMETA_DEPENDENCIES = host-pkgconf cryptsetup
+LUKSMETA_CONF_ENV = ac_cv_prog_A2X=""
 LUKSMETA_INSTALL_STAGING = YES
 
 $(eval $(autotools-package))
diff --git a/buildroot/package/lvm2/lvm2.mk b/buildroot/package/lvm2/lvm2.mk
index 7fdb9a7e3..3da713fe8 100644
--- a/buildroot/package/lvm2/lvm2.mk
+++ b/buildroot/package/lvm2/lvm2.mk
@@ -28,12 +28,11 @@ LVM2_DEPENDENCIES += host-pkgconf libaio
 # take into account the toolchain passed at configure time.
 LVM2_MAKE_ENV = $(TARGET_CONFIGURE_OPTS)
 
-ifeq ($(BR2_PACKAGE_READLINE),y)
-LVM2_DEPENDENCIES += readline
-else
-# v2.02.44: disable readline usage, or binaries are linked against provider
-# of "tgetent" (=> ncurses) even if it's not used..
+# package/readline is GPL-3.0+, so not license compatible
 LVM2_CONF_OPTS += --disable-readline
+
+ifeq ($(BR2_PACKAGE_HAS_UDEV),y)
+LVM2_CONF_OPTS += --enable-udev_rules
 endif
 
 ifeq ($(BR2_PACKAGE_LIBSELINUX),y)
diff --git a/buildroot/package/lxc/0001-syscall_wrappers-rename-internal-memfd_create-to-mem.patch b/buildroot/package/lxc/0001-syscall_wrappers-rename-internal-memfd_create-to-mem.patch
new file mode 100644
index 000000000..6210591c0
--- /dev/null
+++ b/buildroot/package/lxc/0001-syscall_wrappers-rename-internal-memfd_create-to-mem.patch
@@ -0,0 +1,43 @@
+From 2b23a1313f501423aecbe4ad4a988a9f6f832f1f Mon Sep 17 00:00:00 2001
+From: Patrick Havelange 
+Date: Tue, 22 Oct 2019 12:29:54 +0200
+Subject: [PATCH 1/1] syscall_wrappers: rename internal memfd_create to
+ memfd_create_lxc
+
+In case the internal memfd_create has to be used, make sure we don't
+clash with the already existing memfd_create function from glibc.
+
+This can happen if this glibc function is a stub. In this case, at
+./configure time, the test for this function will return false, however
+the declaration of that function is still available. This leads to
+compilation errors.
+
+Signed-off-by: Patrick Havelange 
+---
+ src/lxc/syscall_wrappers.h | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/src/lxc/syscall_wrappers.h b/src/lxc/syscall_wrappers.h
+index 42d94db..bddf01b 100644
+--- a/src/lxc/syscall_wrappers.h
++++ b/src/lxc/syscall_wrappers.h
+@@ -59,7 +59,7 @@ static inline long __keyctl(int cmd, unsigned long arg2, unsigned long arg3,
+ #endif
+ 
+ #ifndef HAVE_MEMFD_CREATE
+-static inline int memfd_create(const char *name, unsigned int flags) {
++static inline int memfd_create_lxc(const char *name, unsigned int flags) {
+ 	#ifndef __NR_memfd_create
+ 		#if defined __i386__
+ 			#define __NR_memfd_create 356
+@@ -98,6 +98,7 @@ static inline int memfd_create(const char *name, unsigned int flags) {
+ 	return -1;
+ 	#endif
+ }
++#define memfd_create memfd_create_lxc
+ #else
+ extern int memfd_create(const char *name, unsigned int flags);
+ #endif
+-- 
+2.20.1
+
diff --git a/buildroot/package/lzma/lzma.hash b/buildroot/package/lzma/lzma.hash
index e73517ca5..6055d7d98 100644
--- a/buildroot/package/lzma/lzma.hash
+++ b/buildroot/package/lzma/lzma.hash
@@ -1,2 +1,5 @@
 # Locally calculated
 sha256	02aa57f995d15b7acb7c2496d88a39fb0124ea00bf027cc61dd24eddb5942dff	lzma-4.32.7.tar.xz
+sha256	231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c	COPYING.GPLv2
+sha256	8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903	COPYING.GPLv3
+sha256	6095e9ffa777dd22839f7801aa845b31c9ed07f3d6bf8a26dc5d2dec8ccc0ef3	COPYING.LGPLv2.1
diff --git a/buildroot/package/lzma/lzma.mk b/buildroot/package/lzma/lzma.mk
index 1b4d7febb..095382d17 100644
--- a/buildroot/package/lzma/lzma.mk
+++ b/buildroot/package/lzma/lzma.mk
@@ -7,6 +7,8 @@
 LZMA_VERSION = 4.32.7
 LZMA_SOURCE = lzma-$(LZMA_VERSION).tar.xz
 LZMA_SITE = http://tukaani.org/lzma
+LZMA_LICENSE = LGPL-2.1+ (lzmadec library, lzmainfo, LzmaDecode), GPL-2.0+ (lzma program, lzgrep and lzmore scripts), GPL-3.0+ (tests)
+LZMA_LICENSE_FILES = COPYING.GPLv2 COPYING.GPLv3 COPYING.LGPLv2.1
 
 $(eval $(host-autotools-package))
 
diff --git a/buildroot/package/mali-t76x/Config.in b/buildroot/package/mali-t76x/Config.in
index a85fa5b27..2533f1000 100644
--- a/buildroot/package/mali-t76x/Config.in
+++ b/buildroot/package/mali-t76x/Config.in
@@ -11,7 +11,7 @@ config BR2_PACKAGE_MALI_T76X
 	  Midgard T76X GPU. This package requires a kernel with the
 	  ARM Mali Midgard GPU Kernel Drivers enabled.
 
-	  Source: http://malideveloper.arm.com/resources/drivers/
+	  http://malideveloper.arm.com/resources/drivers/
 
 if BR2_PACKAGE_MALI_T76X
 
diff --git a/buildroot/package/mariadb/0001-add-extra-check-for-librt.patch b/buildroot/package/mariadb/0001-add-extra-check-for-librt.patch
index 26bff7546..90aa626a0 100644
--- a/buildroot/package/mariadb/0001-add-extra-check-for-librt.patch
+++ b/buildroot/package/mariadb/0001-add-extra-check-for-librt.patch
@@ -3,6 +3,8 @@ From: Ryan Coe 
 Date: Thu, 27 Oct 2016 20:33:21 -0700
 Subject: [PATCH] add extra check for librt
 
+https://jira.mariadb.org/browse/MDEV-10841
+
 Signed-off-by: Ryan Coe 
 ---
  configure.cmake | 3 +++
diff --git a/buildroot/package/mariadb/0002-fix-build-error-with-newer-cmake.patch b/buildroot/package/mariadb/0002-fix-build-error-with-newer-cmake.patch
new file mode 100644
index 000000000..5ffac688a
--- /dev/null
+++ b/buildroot/package/mariadb/0002-fix-build-error-with-newer-cmake.patch
@@ -0,0 +1,44 @@
+From c90ae2ca3dff267b9e21595376d22de397f6f78f Mon Sep 17 00:00:00 2001
+From: Ryan Coe 
+Date: Tue, 20 Aug 2019 06:22:43 -0700
+Subject: [PATCH] Fix build error with newer cmake
+
+Fixes the following build error:
+
+CMake Error at cmake/os/Linux.cmake:29 (STRING):
+STRING sub-command REPLACE requires at least four arguments.
+Call Stack (most recent call first):
+CMakeLists.txt:101 (INCLUDE)
+
+CMake Error at cmake/os/Linux.cmake:29 (STRING):
+STRING sub-command REPLACE requires at least four arguments.
+Call Stack (most recent call first):
+CMakeLists.txt:101 (INCLUDE)
+
+https://jira.mariadb.org/browse/MDEV-20596
+
+Signed-off-by: Ryan Coe 
+---
+ cmake/os/Linux.cmake | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/cmake/os/Linux.cmake b/cmake/os/Linux.cmake
+index 50a2b21c838d8d6ca4cacc0704a9be4da3a57a0a..b871586acc9cfaddc3836cc9afafd85969120420 100644
+--- a/cmake/os/Linux.cmake
++++ b/cmake/os/Linux.cmake
+@@ -26,9 +26,9 @@ SET(CMAKE_REQUIRED_DEFINITIONS ${CMAKE_REQUIRED_DEFINITIONS} -D_GNU_SOURCE=1)
+ 
+ # Fix CMake (< 2.8) flags. -rdynamic exports too many symbols.
+ FOREACH(LANG C CXX)
+-  STRING(REPLACE "-rdynamic" "" 
+-  CMAKE_SHARED_LIBRARY_LINK_${LANG}_FLAGS
+-  ${CMAKE_SHARED_LIBRARY_LINK_${LANG}_FLAGS}  
++  STRING(REPLACE "-rdynamic" ""
++  "CMAKE_SHARED_LIBRARY_LINK_${LANG}_FLAGS"
++  "${CMAKE_SHARED_LIBRARY_LINK_${LANG}_FLAGS}"
+   )
+ ENDFOREACH()
+ 
+-- 
+2.17.1
+
diff --git a/buildroot/package/mariadb/mariadb.hash b/buildroot/package/mariadb/mariadb.hash
index db24f7bb9..a6534d8d6 100644
--- a/buildroot/package/mariadb/mariadb.hash
+++ b/buildroot/package/mariadb/mariadb.hash
@@ -1,9 +1,9 @@
-# From https://downloads.mariadb.org/mariadb/10.3.13
-md5 603ce42e35b9a688f2cca05275acb5cb  mariadb-10.3.13.tar.gz
-sha1 08467885412184e99b835732913d445fd2c4b1b3  mariadb-10.3.13.tar.gz
-sha256 b2aa857ef5b84f85a7ea60a1eac7b34c0ca5151c71a0d44ce2d7fb028d71459a  mariadb-10.3.13.tar.gz
-sha512 3cbd93291aa43b235e5b81d953ea69fb32df54fb518f922f69b5485952f01fae693c77b0efac37f414ed7ff132d3b58f899812bdb7be8a5b344c3640e2c3a0dd  mariadb-10.3.13.tar.gz
+# From https://downloads.mariadb.org/mariadb/10.3.17
+md5 6bcee042bcc393cfcffeccbddbf6fe0e  mariadb-10.3.17.tar.gz
+sha1 16edbd4762c8804118dda10de713cbddc675df5a  mariadb-10.3.17.tar.gz
+sha256 20a1ea4fc59aae89dcc82aff0d4907b036daf9bfbd252f08162399f055097097  mariadb-10.3.17.tar.gz
+sha512 6fba995d8c284a12f19ee5635f5d69d8fa89fc314f512cd1764b2c4593933baf71a472ddce630463debd3bfbafa1cf5afee3f40d3c4062242f58cea16259561e  mariadb-10.3.17.tar.gz
 
 # Hash for license files
-sha256 43f4b5b13cecbbdb04a180cbf6c2bd64237819d1a32165b7d475c1b392e6a8d1  README.md
-sha256 ab15fd526bd8dd18a9e77ebc139656bf4d33e97fc7238cd11bf60e2b9b8666c6  COPYING
+sha256 a4665c1189fe31e0bbc27e9b55439df7dad6e99805407fe58d78da7aabe678f8  README.md
+sha256 240a15a1d0f34d3abca462cdb7e5fb89470967563f16b0e71169e51c1e74cf2b  COPYING
diff --git a/buildroot/package/mariadb/mariadb.mk b/buildroot/package/mariadb/mariadb.mk
index 356dd29af..6d8441b25 100644
--- a/buildroot/package/mariadb/mariadb.mk
+++ b/buildroot/package/mariadb/mariadb.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MARIADB_VERSION = 10.3.13
+MARIADB_VERSION = 10.3.17
 MARIADB_SITE = https://downloads.mariadb.org/interstitial/mariadb-$(MARIADB_VERSION)/source
 MARIADB_LICENSE = GPL-2.0 (server), GPL-2.0 with FLOSS exception (GPL client library), LGPL-2.0 (LGPL client library)
 # Tarball no longer contains LGPL license text
@@ -19,8 +19,10 @@ MARIADB_DEPENDENCIES = \
 	openssl \
 	zlib \
 	libaio \
-	libxml2 \
-	readline
+	libxml2
+
+# use bundled GPL-2.0+ licensed readline as package/readline is GPL-3.0+
+MARIADB_CONF_OPTS += -DWITH_READLINE=ON
 
 # We won't need unit tests
 MARIADB_CONF_OPTS += -DWITH_UNIT_TESTS=0
@@ -86,7 +88,8 @@ MARIADB_CONF_OPTS += \
 	-DMYSQL_DATADIR=/var/lib/mysql \
 	-DMYSQL_UNIX_ADDR=$(MYSQL_SOCKET)
 
-HOST_MARIADB_CONF_OPTS += -DWITH_SSL=OFF
+HOST_MARIADB_DEPENDENCIES = host-openssl
+HOST_MARIADB_CONF_OPTS += -DWITH_SSL=system
 
 # Some helpers must be compiled for host in order to crosscompile mariadb for
 # the target. They are then included by import_executables.cmake which is
diff --git a/buildroot/package/matchbox-common/Config.in b/buildroot/package/matchbox-common/Config.in
index 587a0694e..3717a551f 100644
--- a/buildroot/package/matchbox-common/Config.in
+++ b/buildroot/package/matchbox-common/Config.in
@@ -5,6 +5,8 @@ config BR2_PACKAGE_MATCHBOX_COMMON
 	help
 	  Common desktop folders and matchbox-session script.
 
+	  http://git.yoctoproject.org/cgit/cgit.cgi/matchbox-common/
+
 config BR2_PACKAGE_MATCHBOX_COMMON_PDA
 	bool "PDA style app folder"
 	depends on BR2_PACKAGE_MATCHBOX_COMMON
diff --git a/buildroot/package/matchbox-desktop/Config.in b/buildroot/package/matchbox-desktop/Config.in
index 22c568bc1..9d3e522a5 100644
--- a/buildroot/package/matchbox-desktop/Config.in
+++ b/buildroot/package/matchbox-desktop/Config.in
@@ -4,3 +4,5 @@ config BR2_PACKAGE_MATCHBOX_DESKTOP
 	select BR2_PACKAGE_ZLIB
 	help
 	  A PDA style application launcher or 'item browser'.
+
+	  http://git.yoctoproject.org/cgit/cgit.cgi/matchbox-desktop
diff --git a/buildroot/package/matchbox-desktop/matchbox-desktop.mk b/buildroot/package/matchbox-desktop/matchbox-desktop.mk
index 81b13c079..9054dd80c 100644
--- a/buildroot/package/matchbox-desktop/matchbox-desktop.mk
+++ b/buildroot/package/matchbox-desktop/matchbox-desktop.mk
@@ -11,7 +11,6 @@ MATCHBOX_DESKTOP_SITE = http://downloads.yoctoproject.org/releases/matchbox/matc
 MATCHBOX_DESKTOP_LICENSE = GPL-2.0+
 MATCHBOX_DESKTOP_LICENSE_FILES = COPYING
 MATCHBOX_DESKTOP_DEPENDENCIES = matchbox-lib zlib
-MATCHBOX_DESKTOP_CONF_OPTS = --enable-expat
 
 # The bundled configure script does not properly replace LIBADD_DL, so
 # we force an autoreconf even if we don't have any patches touching
diff --git a/buildroot/package/matchbox-fakekey/Config.in b/buildroot/package/matchbox-fakekey/Config.in
index 1a1f1341e..0a8f62818 100644
--- a/buildroot/package/matchbox-fakekey/Config.in
+++ b/buildroot/package/matchbox-fakekey/Config.in
@@ -4,3 +4,5 @@ config BR2_PACKAGE_MATCHBOX_FAKEKEY
 	select BR2_PACKAGE_XLIB_LIBXTST
 	help
 	  Library for simulating key press events under X11.
+
+	  http://git.yoctoproject.org/cgit/cgit.cgi/libfakekey/
diff --git a/buildroot/package/matchbox-keyboard/Config.in b/buildroot/package/matchbox-keyboard/Config.in
index 8bd2a7972..b6753f3be 100644
--- a/buildroot/package/matchbox-keyboard/Config.in
+++ b/buildroot/package/matchbox-keyboard/Config.in
@@ -6,3 +6,5 @@ config BR2_PACKAGE_MATCHBOX_KEYBOARD
 	select BR2_PACKAGE_MATCHBOX_LIB
 	help
 	  Virtual Keyboard
+
+	  http://git.yoctoproject.org/cgit/cgit.cgi/matchbox-keyboard/
diff --git a/buildroot/package/matchbox-lib/Config.in b/buildroot/package/matchbox-lib/Config.in
index d758ab35a..98cdae730 100644
--- a/buildroot/package/matchbox-lib/Config.in
+++ b/buildroot/package/matchbox-lib/Config.in
@@ -3,3 +3,5 @@ config BR2_PACKAGE_MATCHBOX_LIB
 	select BR2_PACKAGE_XLIB_LIBXEXT
 	help
 	  Matchbox common functionality library.
+
+	  http://git.yoctoproject.org/cgit/cgit.cgi/libmatchbox
diff --git a/buildroot/package/matchbox-panel/Config.in b/buildroot/package/matchbox-panel/Config.in
index 47bd10ad7..1fc38336a 100644
--- a/buildroot/package/matchbox-panel/Config.in
+++ b/buildroot/package/matchbox-panel/Config.in
@@ -4,3 +4,5 @@ config BR2_PACKAGE_MATCHBOX_PANEL
 	help
 	  A flexible always present 'window bar' for holding
 	  application launchers.
+
+	  http://git.yoctoproject.org/cgit/cgit.cgi/matchbox-panel/
diff --git a/buildroot/package/matchbox-startup-monitor/Config.in b/buildroot/package/matchbox-startup-monitor/Config.in
index 9dce60ea1..be2fab4c1 100644
--- a/buildroot/package/matchbox-startup-monitor/Config.in
+++ b/buildroot/package/matchbox-startup-monitor/Config.in
@@ -4,3 +4,5 @@ config BR2_PACKAGE_MATCHBOX_STARTUP_MONITOR
 	select BR2_PACKAGE_STARTUP_NOTIFICATION
 	help
 	  Matchbox Panel Startup Monitor Applet.
+
+	  http://git.yoctoproject.org/cgit.cgi/mb-applet-startup-monitor/
diff --git a/buildroot/package/mbedtls/mbedtls.hash b/buildroot/package/mbedtls/mbedtls.hash
index 57a5aeffc..84fe820c5 100644
--- a/buildroot/package/mbedtls/mbedtls.hash
+++ b/buildroot/package/mbedtls/mbedtls.hash
@@ -1,5 +1,5 @@
-# From https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.0-2.7.9-and-2.1.18-released
-sha1	70dc65f3f6f6b2392b821163be7f1f634f0012c8	mbedtls-2.7.9-apache.tgz
-sha256	18e57260b46579245744adb79c2924194dad36aac38c2d0be9e749b9181c706f	mbedtls-2.7.9-apache.tgz
+# From https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.3-and-2.7.12-released
+sha1	ce1af75d497cc03fe5c8e8e15fbf583d9dfbacd1	mbedtls-2.7.12-apache.tgz
+sha256	d3a36dbc9f607747daa6875c1ab2e41f49eff5fc99d3436b4f3ac90c89f3c143	mbedtls-2.7.12-apache.tgz
 # Locally calculated
 sha256	cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30	apache-2.0.txt
diff --git a/buildroot/package/mbedtls/mbedtls.mk b/buildroot/package/mbedtls/mbedtls.mk
index 4a5a731d4..427b2acb5 100644
--- a/buildroot/package/mbedtls/mbedtls.mk
+++ b/buildroot/package/mbedtls/mbedtls.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 MBEDTLS_SITE = https://tls.mbed.org/code/releases
-MBEDTLS_VERSION = 2.7.9
+MBEDTLS_VERSION = 2.7.12
 MBEDTLS_SOURCE = mbedtls-$(MBEDTLS_VERSION)-apache.tgz
 MBEDTLS_CONF_OPTS = \
 	-DENABLE_PROGRAMS=$(if $(BR2_PACKAGE_MBEDTLS_PROGRAMS),ON,OFF) \
diff --git a/buildroot/package/mdadm/Config.in b/buildroot/package/mdadm/Config.in
index 61d631cda..8c6bb08ad 100644
--- a/buildroot/package/mdadm/Config.in
+++ b/buildroot/package/mdadm/Config.in
@@ -5,7 +5,7 @@ config BR2_PACKAGE_MDADM
 	help
 	  Utility for managing Linux Software RAID arrays.
 
-	  http://neil.brown.name/blog/mdadm
+	  https://raid.wiki.kernel.org/index.php/A_guide_to_mdadm
 
 comment "mdadm needs a toolchain w/ dynamic library"
 	depends on BR2_STATIC_LIBS
diff --git a/buildroot/package/mediastreamer/Config.in b/buildroot/package/mediastreamer/Config.in
index afaed4a73..b18c83c5e 100644
--- a/buildroot/package/mediastreamer/Config.in
+++ b/buildroot/package/mediastreamer/Config.in
@@ -11,7 +11,7 @@ config BR2_PACKAGE_MEDIASTREAMER
 	  and sending of multimedia streams in linphone, including
 	  voice/video capture, encoding and decoding, and rendering.
 
-	  http://www.linphone.org/eng/documentation/dev/mediastreamer2.html
+	  http://www.linphone.org/technical-corner/mediastreamer2
 
 comment "mediastreamer needs a toolchain w/ threads, C++"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/mesa3d/Config.in b/buildroot/package/mesa3d/Config.in
index fdd64b033..9fb46a72f 100644
--- a/buildroot/package/mesa3d/Config.in
+++ b/buildroot/package/mesa3d/Config.in
@@ -164,7 +164,7 @@ config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST
 
 config BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4
 	bool "Gallium vc4 driver"
-	depends on BR2_ARM_CPU_HAS_NEON || BR2_aarch64
+	depends on BR2_arm || BR2_aarch64
 	select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
 	select BR2_PACKAGE_LIBDRM_VC4
 	select BR2_PACKAGE_MESA3D_NEEDS_XA
diff --git a/buildroot/package/meson/meson.mk b/buildroot/package/meson/meson.mk
index d76541cc9..71bdadf82 100644
--- a/buildroot/package/meson/meson.mk
+++ b/buildroot/package/meson/meson.mk
@@ -45,9 +45,9 @@ else
 HOST_MESON_TARGET_CPU_FAMILY = $(ARCH)
 endif
 
-HOST_MESON_SED_CFLAGS = $(if $(TARGET_CFLAGS),`printf '"%s"$(comma) ' $(TARGET_CFLAGS)`)
-HOST_MESON_SED_LDFLAGS = $(if $(TARGET_LDFLAGS),`printf '"%s"$(comma) ' $(TARGET_LDFLAGS)`)
-HOST_MESON_SED_CXXFLAGS = $(if $(TARGET_CXXFLAGS),`printf '"%s"$(comma) ' $(TARGET_CXXFLAGS)`)
+HOST_MESON_SED_CFLAGS = $(if $(strip $(TARGET_CFLAGS)),`printf '"%s"$(comma) ' $(TARGET_CFLAGS)`)
+HOST_MESON_SED_LDFLAGS = $(if $(strip $(TARGET_LDFLAGS)),`printf '"%s"$(comma) ' $(TARGET_LDFLAGS)`)
+HOST_MESON_SED_CXXFLAGS = $(if $(strip $(TARGET_CXXFLAGS)),`printf '"%s"$(comma) ' $(TARGET_CXXFLAGS)`)
 
 # Generate a Meson cross-compilation.conf suitable for use with the
 # SDK
diff --git a/buildroot/package/metacity/Config.in b/buildroot/package/metacity/Config.in
index 833a091e7..fc106a26b 100644
--- a/buildroot/package/metacity/Config.in
+++ b/buildroot/package/metacity/Config.in
@@ -14,3 +14,5 @@ config BR2_PACKAGE_METACITY
 	select BR2_PACKAGE_XLIB_LIBXFT
 	help
 	  Metacity is a window manager for the X Window System.
+
+	  https://wiki.gnome.org/Projects/Metacity
diff --git a/buildroot/package/metacity/metacity.mk b/buildroot/package/metacity/metacity.mk
index b93200ca5..f5a6d4afd 100644
--- a/buildroot/package/metacity/metacity.mk
+++ b/buildroot/package/metacity/metacity.mk
@@ -26,7 +26,10 @@ METACITY_DEPENDENCIES = libgtk2 \
 	xlib_libXcomposite \
 	xlib_libXfixes \
 	xlib_libXrender \
-	xlib_libXdamage
+	xlib_libXdamage \
+	$(TARGET_NLS_DEPENDENCIES)
+
+METACITY_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 ifeq ($(BR2_PACKAGE_XLIB_LIBXCURSOR),y)
 METACITY_DEPENDENCIES += xlib_libXcursor
diff --git a/buildroot/package/mii-diag/Config.in b/buildroot/package/mii-diag/Config.in
index ca48ba216..37f3647bb 100644
--- a/buildroot/package/mii-diag/Config.in
+++ b/buildroot/package/mii-diag/Config.in
@@ -3,3 +3,5 @@ config BR2_PACKAGE_MII_DIAG
 	help
 	  mii-diag allows you to manipulate the MII registers of
 	  network cards.
+
+	  https://launchpad.net/ubuntu/+source/mii-diag
diff --git a/buildroot/package/minicom/minicom.mk b/buildroot/package/minicom/minicom.mk
index 000597f8a..4635d39ee 100644
--- a/buildroot/package/minicom/minicom.mk
+++ b/buildroot/package/minicom/minicom.mk
@@ -28,4 +28,8 @@ define MINICOM_MKDIR_M4
 endef
 MINICOM_POST_PATCH_HOOKS += MINICOM_MKDIR_M4
 
+MINICOM_CONF_OPTS = \
+	--enable-dfl-port=/dev/ttyS1 \
+	--enable-lock-dir=/var/lock
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/minizip/Config.in b/buildroot/package/minizip/Config.in
index 5a0c52b3b..e4d185d9d 100644
--- a/buildroot/package/minizip/Config.in
+++ b/buildroot/package/minizip/Config.in
@@ -1,6 +1,7 @@
 config BR2_PACKAGE_MINIZIP
 	bool "minizip"
 	depends on BR2_USE_WCHAR
+	select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
 	help
 	  Enables to extract files from a .zip archive file.
 	  It is compatible with PKZip 2.04g, WinZip, InfoZip,
diff --git a/buildroot/package/mjpegtools/0001-PROGRAM_NOPIC-apparently-causes-problems-on-some-x86_64-systems.patch b/buildroot/package/mjpegtools/0001-PROGRAM_NOPIC-apparently-causes-problems-on-some-x86_64-systems.patch
new file mode 100644
index 000000000..f5de8ee96
--- /dev/null
+++ b/buildroot/package/mjpegtools/0001-PROGRAM_NOPIC-apparently-causes-problems-on-some-x86_64-systems.patch
@@ -0,0 +1,73 @@
+From e69557bea18eb7c3069c9527cc30f7cd91be27b7 Mon Sep 17 00:00:00 2001
+From: sms00 
+Date: Thu, 28 Nov 2013 22:39:41 +0000
+Subject: [PATCH] PROGRAM_NOPIC apparently causes problems on some x86_64
+ systems, has little to no performance effect on x86_64 systems and even on
+ x86 systems most programs are I/O bound anyhow.  So remove the 4 uses of the
+ flag
+
+git-svn-id: https://svn.code.sf.net/p/mjpeg/Code/trunk/mjpeg_play@3359 3be20b7b-d6de-45d7-9b51-1db703c412de
+
+[Retrieved (and backported by removing INSTALL updates) from:
+https://github.com/jaystevens/mjpegtools/commit/e69557bea18eb7c3069c9527cc30f7cd91be27b7]
+Signed-off-by: Fabrice Fontaine 
+---
+ y4mdenoise/Makefile.am |   4 +-
+ y4munsharp/Makefile.am |   2 +-
+ y4mutils/Makefile.am   |   2 +-
+ yuvscaler/Makefile.am  |   2 +-
+ 5 files changed, 26 insertions(+), 94 deletions(-)
+
+diff --git a/y4mdenoise/Makefile.am b/y4mdenoise/Makefile.am
+index dee9064f..d7fa76e2 100644
+--- a/y4mdenoise/Makefile.am
++++ b/y4mdenoise/Makefile.am
+@@ -4,8 +4,8 @@ MAINTAINERCLEANFILES = Makefile.in
+ 
+ EXTRA_DIST = implementation.html
+ 
+-AM_CFLAGS = -DNDEBUG -finline-functions @PROGRAM_NOPIC@
+-AM_CXXFLAGS = -DNDEBUG -finline-functions @PROGRAM_NOPIC@
++AM_CFLAGS = -DNDEBUG -finline-functions
++AM_CXXFLAGS = -DNDEBUG -finline-functions
+ 
+ INCLUDES =  -I$(top_srcdir) -I$(top_srcdir)/utils
+ 
+diff --git a/y4munsharp/Makefile.am b/y4munsharp/Makefile.am
+index a7f98acc..f99ff5cf 100644
+--- a/y4munsharp/Makefile.am
++++ b/y4munsharp/Makefile.am
+@@ -4,7 +4,7 @@ MAINTAINERCLEANFILES = Makefile.in
+ 
+ INCLUDES = -I $(top_srcdir)/utils -I $(top_srcdir)
+ 
+-y4munharp_CFLAGS=@PROGRAM_NOPIC@
++y4munharp_CFLAGS=
+ 
+ bin_PROGRAMS = y4munsharp
+ 
+diff --git a/y4mutils/Makefile.am b/y4mutils/Makefile.am
+index f3b0a671..7b8b1881 100644
+--- a/y4mutils/Makefile.am
++++ b/y4mutils/Makefile.am
+@@ -2,7 +2,7 @@
+ 
+ MAINTAINERCLEANFILES = Makefile.in
+ 
+-AM_CFLAGS   = @PROGRAM_NOPIC@
++AM_CFLAGS   =
+ AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/utils
+ 
+ LIBMJPEGUTILS = $(top_builddir)/utils/libmjpegutils.la
+diff --git a/yuvscaler/Makefile.am b/yuvscaler/Makefile.am
+index 1fe4d757..6d2adaca 100644
+--- a/yuvscaler/Makefile.am
++++ b/yuvscaler/Makefile.am
+@@ -18,6 +18,6 @@ noinst_HEADERS = \
+ 
+ EXTRA_DIST = yuvscaler_implementation.txt
+ 
+-yuvscaler_CFLAGS=@PROGRAM_NOPIC@
++yuvscaler_CFLAGS=
+ yuvscaler_SOURCES = yuvscaler.c yuvscaler_resample.c yuvscaler_bicubic.c
+ yuvscaler_LDADD = $(LIBMJPEGUTILS) $(LIBM_LIBS)
diff --git a/buildroot/package/mjpegtools/mjpegtools.mk b/buildroot/package/mjpegtools/mjpegtools.mk
index 14713c868..f028afc82 100644
--- a/buildroot/package/mjpegtools/mjpegtools.mk
+++ b/buildroot/package/mjpegtools/mjpegtools.mk
@@ -9,6 +9,8 @@ MJPEGTOOLS_SITE = http://sourceforge.net/projects/mjpeg/files/mjpegtools/$(MJPEG
 MJPEGTOOLS_DEPENDENCIES = host-pkgconf jpeg
 MJPEGTOOLS_LICENSE = GPL-2.0+
 MJPEGTOOLS_LICENSE_FILES = COPYING
+# We're patching Makefile.am
+MJPEGTOOLS_AUTORECONF = YES
 
 ifeq ($(BR2_PACKAGE_MJPEGTOOLS_SIMD_SUPPORT),y)
 MJPEGTOOLS_CONF_OPTS += --enable-simd-accel
diff --git a/buildroot/package/mongodb/mongodb.hash b/buildroot/package/mongodb/mongodb.hash
index 916323d7c..f08ffffe3 100644
--- a/buildroot/package/mongodb/mongodb.hash
+++ b/buildroot/package/mongodb/mongodb.hash
@@ -1,4 +1,4 @@
 # Locally computed:
-sha256 5db85f06b2a0b2ae393339a4aed1366928aaef2b46c7c32826fa87c3217dc6f7  mongodb-r4.0.6.tar.gz
+sha256 b39c5b7bb77a547804ab6f43f9b5f09add47574356b31512fd1cc641a08b4ea5  mongodb-r4.0.12.tar.gz
 sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30  APACHE-2.0.txt
 sha256 09d99ca61eb07873d5334077acba22c33e7f7d0a9fa08c92734e0ac8430d6e27  LICENSE-Community.txt
diff --git a/buildroot/package/mongodb/mongodb.mk b/buildroot/package/mongodb/mongodb.mk
index e420ecb41..d33670c14 100644
--- a/buildroot/package/mongodb/mongodb.mk
+++ b/buildroot/package/mongodb/mongodb.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MONGODB_VERSION_BASE = 4.0.6
+MONGODB_VERSION_BASE = 4.0.12
 MONGODB_VERSION = r$(MONGODB_VERSION_BASE)
 MONGODB_SITE = $(call github,mongodb,mongo,$(MONGODB_VERSION))
 
diff --git a/buildroot/package/mongoose/mongoose.hash b/buildroot/package/mongoose/mongoose.hash
index 86ebe8efb..d38013163 100644
--- a/buildroot/package/mongoose/mongoose.hash
+++ b/buildroot/package/mongoose/mongoose.hash
@@ -1,3 +1,3 @@
 # Locally computed:
-sha256	ec7956b8f2845f6c22e19ab38a0c32c9b379087f0038c7db661b34812f225911  mongoose-6.13.tar.gz
+sha256	1f20f2781862560ddf3203dfb0e6fcf248a68bf92aefbeafb9d2a629c4767c02  mongoose-6.16.tar.gz
 sha256	fdc34eeea97327d75c83492abd34f1a3200c53dec04422ecda8071dc60a36d10  LICENSE
diff --git a/buildroot/package/mongoose/mongoose.mk b/buildroot/package/mongoose/mongoose.mk
index 653c83c7d..bb40de261 100644
--- a/buildroot/package/mongoose/mongoose.mk
+++ b/buildroot/package/mongoose/mongoose.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MONGOOSE_VERSION = 6.13
+MONGOOSE_VERSION = 6.16
 MONGOOSE_SITE = $(call github,cesanta,mongoose,$(MONGOOSE_VERSION))
 MONGOOSE_LICENSE = GPL-2.0
 MONGOOSE_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/monit/monit.hash b/buildroot/package/monit/monit.hash
index d1c09f137..3f528590d 100644
--- a/buildroot/package/monit/monit.hash
+++ b/buildroot/package/monit/monit.hash
@@ -1,4 +1,4 @@
-# From https://mmonit.com/monit/dist/monit-5.25.2.tar.gz.sha256:
-sha256  aa0ce6361d1155e43e30a86dcff00b2003d434f221c360981ced830275abc64a  monit-5.25.2.tar.gz
+# From https://mmonit.com/monit/dist/monit-5.25.3.tar.gz.sha256:
+sha256  c10258c8839d20864d30390e7cbf2ff5e0480a67a6fb80c02aa457d6e3390569  monit-5.25.3.tar.gz
 # Locally computed
 sha256  d5a4f52b1a5e1e7fe14e01a76aac8b08dc6bbea15466058f271456c97aac1ada  COPYING
diff --git a/buildroot/package/monit/monit.mk b/buildroot/package/monit/monit.mk
index 906ed842d..980da13cb 100644
--- a/buildroot/package/monit/monit.mk
+++ b/buildroot/package/monit/monit.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MONIT_VERSION = 5.25.2
+MONIT_VERSION = 5.25.3
 MONIT_SITE = http://mmonit.com/monit/dist
 MONIT_LICENSE = AGPL-3.0 with OpenSSL exception
 MONIT_LICENSE_FILES = COPYING
diff --git a/buildroot/package/mosquitto/Config.in b/buildroot/package/mosquitto/Config.in
index 11b6d7891..c7373d9a8 100644
--- a/buildroot/package/mosquitto/Config.in
+++ b/buildroot/package/mosquitto/Config.in
@@ -21,7 +21,7 @@ config BR2_PACKAGE_MOSQUITTO_BROKER
 	  Build and install the mosquitto broker onto target.
 
 comment "mosquitto broker needs a system with MMU"
-	depends on BR2_PACKAGE_MOSQUTTO && !BR2_USE_MMU
+	depends on BR2_PACKAGE_MOSQUITTO && !BR2_USE_MMU
 
 comment "mosquitto needs a toolchain w/ dynamic library"
 	depends on BR2_STATIC_LIBS
diff --git a/buildroot/package/mosquitto/mosquitto.hash b/buildroot/package/mosquitto/mosquitto.hash
index 25b991013..83b521aa8 100644
--- a/buildroot/package/mosquitto/mosquitto.hash
+++ b/buildroot/package/mosquitto/mosquitto.hash
@@ -1,5 +1,5 @@
 # Locally calculated after checking gpg signature
-sha256 78d7e70c3794dc3a1d484b4f2f8d3addebe9c2da3f5a1cebe557f7d13beb0da4  mosquitto-1.5.8.tar.gz
+sha256 d7b62aa0ca680b0d869d6883373903362f98326a6465fc6cd01a0b9e0e8f0333  mosquitto-1.5.9.tar.gz
 
 # License files
 sha256 cc77e25bafd40637b7084f04086d606f0a200051b61806f97c93405926670bc1  LICENSE.txt
diff --git a/buildroot/package/mosquitto/mosquitto.mk b/buildroot/package/mosquitto/mosquitto.mk
index 51c0abd0b..b6ee048cc 100644
--- a/buildroot/package/mosquitto/mosquitto.mk
+++ b/buildroot/package/mosquitto/mosquitto.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MOSQUITTO_VERSION = 1.5.8
+MOSQUITTO_VERSION = 1.5.9
 MOSQUITTO_SITE = https://mosquitto.org/files/source
 MOSQUITTO_LICENSE = EPL-1.0 or EDLv1.0
 MOSQUITTO_LICENSE_FILES = LICENSE.txt epl-v10 edl-v10
diff --git a/buildroot/package/mp4v2/Config.in b/buildroot/package/mp4v2/Config.in
index 42315a227..490ebac9f 100644
--- a/buildroot/package/mp4v2/Config.in
+++ b/buildroot/package/mp4v2/Config.in
@@ -5,7 +5,7 @@ config BR2_PACKAGE_MP4V2
 	  The MP4v2 library provides functions to read, create, and
 	  modify mp4 files.
 
-	  https://code.google.com/p/mp4v2/
+	  https://code.google.com/archive/p/mp4v2/
 
 if BR2_PACKAGE_MP4V2
 
diff --git a/buildroot/package/mpd/Config.in b/buildroot/package/mpd/Config.in
index d3844391a..923f0c220 100644
--- a/buildroot/package/mpd/Config.in
+++ b/buildroot/package/mpd/Config.in
@@ -9,7 +9,6 @@ menuconfig BR2_PACKAGE_MPD
 	depends on !BR2_TOOLCHAIN_HAS_GCC_BUG_64735 # exception_ptr
 	select BR2_PACKAGE_BOOST
 	select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
-	select BR2_PACKAGE_MPD_TREMOR if !(BR2_PACKAGE_MPD_MAD || BR2_PACKAGE_MPD_MPG123 || BR2_PACKAGE_MPD_VORBIS || BR2_PACKAGE_MPD_WAVPACK || BR2_PACKAGE_MPD_FLAC || BR2_PACKAGE_MPD_MUSEPACK || BR2_PACKAGE_MPD_FFMPEG)
 	help
 	  MPD is a flexible, powerful, server-side application
 	  for playing music. Through plugins and libraries
@@ -133,6 +132,7 @@ config BR2_PACKAGE_MPD_OPUS
 
 config BR2_PACKAGE_MPD_TREMOR
 	bool "tremor"
+	depends on !BR2_PACKAGE_MPD_VORBIS
 	select BR2_PACKAGE_LIBOGG
 	select BR2_PACKAGE_TREMOR
 	help
diff --git a/buildroot/package/mpg123/mpg123.hash b/buildroot/package/mpg123/mpg123.hash
index 22db5bca3..e5a549b57 100644
--- a/buildroot/package/mpg123/mpg123.hash
+++ b/buildroot/package/mpg123/mpg123.hash
@@ -1,7 +1,7 @@
-# From https://sourceforge.net/projects/mpg123/files/mpg123/1.25.10/
-sha1 604784ddbcfe282bffdc595d1d45c677c7cf381f  mpg123-1.25.10.tar.bz2
-md5 ea32caa61d41d8be797f0b04a1b43ad9  mpg123-1.25.10.tar.bz2
+# From https://sourceforge.net/projects/mpg123/files/mpg123/1.25.12/
+sha1 4ece1ec124a6ca085e1d68f7ede6d5619fc587ff  mpg123-1.25.12.tar.bz2
+md5 ddb38254966eb38c77f220d456a1839d  mpg123-1.25.12.tar.bz2
 # Locally calculated
-sha256 6c1337aee2e4bf993299851c70b7db11faec785303cfca3a5c3eb5f329ba7023  mpg123-1.25.10.tar.bz2
+sha256 1ffec7c9683dfb86ea9040d6a53d6ea819ecdda215df347f79def08f1fe731d1  mpg123-1.25.12.tar.bz2
 # License file
 sha256  f40e0dd86b27b52e429b693a87b3ca63ae0a98a4d142e77207aa6bdf1db7a295  COPYING
diff --git a/buildroot/package/mpg123/mpg123.mk b/buildroot/package/mpg123/mpg123.mk
index dd2d39d97..6247e54a0 100644
--- a/buildroot/package/mpg123/mpg123.mk
+++ b/buildroot/package/mpg123/mpg123.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-MPG123_VERSION = 1.25.10
+MPG123_VERSION = 1.25.12
 MPG123_SOURCE = mpg123-$(MPG123_VERSION).tar.bz2
 MPG123_SITE = http://downloads.sourceforge.net/project/mpg123/mpg123/$(MPG123_VERSION)
 MPG123_CONF_OPTS = --disable-lfs-alias
diff --git a/buildroot/package/musl/0004-fix-x87-stack-imbalance-in-corner-cases-of-i386-math.patch b/buildroot/package/musl/0004-fix-x87-stack-imbalance-in-corner-cases-of-i386-math.patch
new file mode 100644
index 000000000..8940c2865
--- /dev/null
+++ b/buildroot/package/musl/0004-fix-x87-stack-imbalance-in-corner-cases-of-i386-math.patch
@@ -0,0 +1,200 @@
+From f3ed8bfe8a82af1870ddc8696ed4cc1d5aa6b441 Mon Sep 17 00:00:00 2001
+From: Rich Felker 
+Date: Mon, 5 Aug 2019 18:41:47 -0400
+Subject: [PATCH] fix x87 stack imbalance in corner cases of i386 math asm
+
+commit 31c5fb80b9eae86f801be4f46025bc6532a554c5 introduced underflow
+code paths for the i386 math asm, along with checks on the fpu status
+word to skip the underflow-generation instructions if the underflow
+flag was already raised. unfortunately, at least one such path, in
+log1p, returned with 2 items on the x87 stack rather than just 1 item
+for the return value. this is a violation of the ABI's calling
+convention, and could cause subsequent floating point code to produce
+NANs due to x87 stack overflow. if floating point results are used in
+flow control, this can lead to runaway wrong code execution.
+
+rather than reviewing each "underflow already raised" code path for
+correctness, remove them all. they're likely slower than just
+performing the underflow code unconditionally, and significantly more
+complex.
+
+all of this code should be ripped out and replaced by C source files
+with inline asm. doing so would preclude this kind of error by having
+the compiler perform all x87 stack register allocation and stack
+manipulation, and would produce comparable or better code. however
+such a change is a much larger project.
+
+Signed-off-by: Peter Korsgaard 
+---
+ src/math/i386/asin.s   | 10 ++--------
+ src/math/i386/atan.s   |  7 ++-----
+ src/math/i386/atan2.s  |  5 +----
+ src/math/i386/atan2f.s |  5 +----
+ src/math/i386/atanf.s  |  7 ++-----
+ src/math/i386/exp.s    | 10 ++--------
+ src/math/i386/log1p.s  |  7 ++-----
+ src/math/i386/log1pf.s |  7 ++-----
+ 8 files changed, 14 insertions(+), 44 deletions(-)
+
+diff --git a/src/math/i386/asin.s b/src/math/i386/asin.s
+index a9f691bf..920d967a 100644
+--- a/src/math/i386/asin.s
++++ b/src/math/i386/asin.s
+@@ -7,13 +7,10 @@ asinf:
+ 	cmp $0x01000000,%eax
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+-	fnstsw %ax
+-	and $16,%ax
+-	jnz 2f
+ 	fld %st(0)
+ 	fmul %st(1)
+ 	fstps 4(%esp)
+-2:	ret
++	ret
+ 
+ .global asinl
+ .type asinl,@function
+@@ -30,11 +27,8 @@ asin:
+ 	cmp $0x00200000,%eax
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+-	fnstsw %ax
+-	and $16,%ax
+-	jnz 2f
+ 	fsts 4(%esp)
+-2:	ret
++	ret
+ 1:	fld %st(0)
+ 	fld1
+ 	fsub %st(0),%st(1)
+diff --git a/src/math/i386/atan.s b/src/math/i386/atan.s
+index d73137b2..a26feae1 100644
+--- a/src/math/i386/atan.s
++++ b/src/math/i386/atan.s
+@@ -10,8 +10,5 @@ atan:
+ 	fpatan
+ 	ret
+ 		# subnormal x, return x with underflow
+-1:	fnstsw %ax
+-	and $16,%ax
+-	jnz 2f
+-	fsts 4(%esp)
+-2:	ret
++1:	fsts 4(%esp)
++	ret
+diff --git a/src/math/i386/atan2.s b/src/math/i386/atan2.s
+index a7d2979b..1fa0524d 100644
+--- a/src/math/i386/atan2.s
++++ b/src/math/i386/atan2.s
+@@ -10,8 +10,5 @@ atan2:
+ 	cmp $0x00200000,%eax
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+-	fnstsw %ax
+-	and $16,%ax
+-	jnz 1f
+ 	fsts 4(%esp)
+-1:	ret
++	ret
+diff --git a/src/math/i386/atan2f.s b/src/math/i386/atan2f.s
+index 14b88ce5..0b264726 100644
+--- a/src/math/i386/atan2f.s
++++ b/src/math/i386/atan2f.s
+@@ -10,10 +10,7 @@ atan2f:
+ 	cmp $0x01000000,%eax
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+-	fnstsw %ax
+-	and $16,%ax
+-	jnz 1f
+ 	fld %st(0)
+ 	fmul %st(1)
+ 	fstps 4(%esp)
+-1:	ret
++	ret
+diff --git a/src/math/i386/atanf.s b/src/math/i386/atanf.s
+index 8caddefa..893beac5 100644
+--- a/src/math/i386/atanf.s
++++ b/src/math/i386/atanf.s
+@@ -10,10 +10,7 @@ atanf:
+ 	fpatan
+ 	ret
+ 		# subnormal x, return x with underflow
+-1:	fnstsw %ax
+-	and $16,%ax
+-	jnz 2f
+-	fld %st(0)
++1:	fld %st(0)
+ 	fmul %st(1)
+ 	fstps 4(%esp)
+-2:	ret
++	ret
+diff --git a/src/math/i386/exp.s b/src/math/i386/exp.s
+index c7aa5b6e..df87c497 100644
+--- a/src/math/i386/exp.s
++++ b/src/math/i386/exp.s
+@@ -7,13 +7,10 @@ expm1f:
+ 	cmp $0x01000000,%eax
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+-	fnstsw %ax
+-	and $16,%ax
+-	jnz 2f
+ 	fld %st(0)
+ 	fmul %st(1)
+ 	fstps 4(%esp)
+-2:	ret
++	ret
+ 
+ .global expm1l
+ .type expm1l,@function
+@@ -30,11 +27,8 @@ expm1:
+ 	cmp $0x00200000,%eax
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+-	fnstsw %ax
+-	and $16,%ax
+-	jnz 2f
+ 	fsts 4(%esp)
+-2:	ret
++	ret
+ 1:	fldl2e
+ 	fmulp
+ 	mov $0xc2820000,%eax
+diff --git a/src/math/i386/log1p.s b/src/math/i386/log1p.s
+index 6b6929c7..354f391a 100644
+--- a/src/math/i386/log1p.s
++++ b/src/math/i386/log1p.s
+@@ -16,9 +16,6 @@ log1p:
+ 	fyl2x
+ 	ret
+ 		# subnormal x, return x with underflow
+-2:	fnstsw %ax
+-	and $16,%ax
+-	jnz 1f
+-	fsts 4(%esp)
++2:	fsts 4(%esp)
+ 	fstp %st(1)
+-1:	ret
++	ret
+diff --git a/src/math/i386/log1pf.s b/src/math/i386/log1pf.s
+index c0bcd30f..4d3484cd 100644
+--- a/src/math/i386/log1pf.s
++++ b/src/math/i386/log1pf.s
+@@ -16,10 +16,7 @@ log1pf:
+ 	fyl2x
+ 	ret
+ 		# subnormal x, return x with underflow
+-2:	fnstsw %ax
+-	and $16,%ax
+-	jnz 1f
+-	fxch
++2:	fxch
+ 	fmul %st(1)
+ 	fstps 4(%esp)
+-1:	ret
++	ret
+-- 
+2.11.0
+
diff --git a/buildroot/package/musl/0005-fix-build-regression-in-i386-asm-for-atan2-atan2f.patch b/buildroot/package/musl/0005-fix-build-regression-in-i386-asm-for-atan2-atan2f.patch
new file mode 100644
index 000000000..824933c6d
--- /dev/null
+++ b/buildroot/package/musl/0005-fix-build-regression-in-i386-asm-for-atan2-atan2f.patch
@@ -0,0 +1,37 @@
+From 6818c31c9bc4bbad5357f1de14bedf781e5b349e Mon Sep 17 00:00:00 2001
+From: Rich Felker 
+Date: Mon, 5 Aug 2019 19:57:07 -0400
+Subject: [PATCH] fix build regression in i386 asm for atan2, atan2f
+
+commit f3ed8bfe8a82af1870ddc8696ed4cc1d5aa6b441 inadvertently removed
+labels that were still needed.
+
+Signed-off-by: Peter Korsgaard 
+---
+ src/math/i386/atan2.s  | 2 +-
+ src/math/i386/atan2f.s | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/src/math/i386/atan2.s b/src/math/i386/atan2.s
+index 1fa0524d..76b95f31 100644
+--- a/src/math/i386/atan2.s
++++ b/src/math/i386/atan2.s
+@@ -11,4 +11,4 @@ atan2:
+ 	jae 1f
+ 		# subnormal x, return x with underflow
+ 	fsts 4(%esp)
+-	ret
++1:	ret
+diff --git a/src/math/i386/atan2f.s b/src/math/i386/atan2f.s
+index 0b264726..c9408a90 100644
+--- a/src/math/i386/atan2f.s
++++ b/src/math/i386/atan2f.s
+@@ -13,4 +13,4 @@ atan2f:
+ 	fld %st(0)
+ 	fmul %st(1)
+ 	fstps 4(%esp)
+-	ret
++1:	ret
+-- 
+2.11.0
+
diff --git a/buildroot/package/musl/Config.in b/buildroot/package/musl/Config.in
index 67e9e78a1..69da615b6 100644
--- a/buildroot/package/musl/Config.in
+++ b/buildroot/package/musl/Config.in
@@ -8,3 +8,5 @@ config BR2_PACKAGE_MUSL
 		&& !(BR2_i386 || BR2_powerpc)
 	# Compatibility headers: cdefs.h, queue.h
 	select BR2_PACKAGE_MUSL_COMPAT_HEADERS
+	help
+	  https://www.musl-libc.org/
diff --git a/buildroot/package/mxsldr/Config.in.host b/buildroot/package/mxsldr/Config.in.host
index a427e71cf..0a02877c8 100644
--- a/buildroot/package/mxsldr/Config.in.host
+++ b/buildroot/package/mxsldr/Config.in.host
@@ -6,4 +6,4 @@ config BR2_PACKAGE_HOST_MXSLDR
 	  Freescale i.MX23 and i.MX28 SoC's through the Serial
 	  Download Protocol.
 
-	  git://git.denx.de/mxsldr.git
+	  https://gitlab.denx.de/denx/mxsldr
diff --git a/buildroot/package/mysql/Config.in b/buildroot/package/mysql/Config.in
index 30a82cc91..ef4a9531a 100644
--- a/buildroot/package/mysql/Config.in
+++ b/buildroot/package/mysql/Config.in
@@ -22,7 +22,6 @@ config BR2_PACKAGE_MARIADB
 	select BR2_PACKAGE_LIBXML2
 	select BR2_PACKAGE_NCURSES
 	select BR2_PACKAGE_OPENSSL
-	select BR2_PACKAGE_READLINE
 	select BR2_PACKAGE_HAS_MYSQL
 	help
 	  MariaDB is one of the most popular database servers in the
@@ -38,7 +37,6 @@ comment "mariadb needs a toolchain w/ dynamic library"
 config BR2_PACKAGE_ORACLE_MYSQL
 	bool "oracle mysql"
 	select BR2_PACKAGE_NCURSES
-	select BR2_PACKAGE_READLINE
 	select BR2_PACKAGE_HAS_MYSQL
 	help
 	  The MySQL Open Source Database System
diff --git a/buildroot/package/ncurses/ncurses.hash b/buildroot/package/ncurses/ncurses.hash
index 045625ae3..123256bf9 100644
--- a/buildroot/package/ncurses/ncurses.hash
+++ b/buildroot/package/ncurses/ncurses.hash
@@ -1,2 +1,4 @@
 # Locally calculated after checking pgp signature
 sha256	aa057eeeb4a14d470101eff4597d5833dcef5965331be3528c08d99cebaa0d17	ncurses-6.1.tar.gz
+# Locally computed
+sha256	86106f0da1cf5ccfa0f0651665dd1b4515e8edad1c7972780155770548b317d9	COPYING
diff --git a/buildroot/package/ncurses/ncurses.mk b/buildroot/package/ncurses/ncurses.mk
index e27598bd4..12fb9812e 100644
--- a/buildroot/package/ncurses/ncurses.mk
+++ b/buildroot/package/ncurses/ncurses.mk
@@ -9,7 +9,7 @@ NCURSES_SITE = $(BR2_GNU_MIRROR)/ncurses
 NCURSES_INSTALL_STAGING = YES
 NCURSES_DEPENDENCIES = host-ncurses
 NCURSES_LICENSE = MIT with advertising clause
-NCURSES_LICENSE_FILES = README
+NCURSES_LICENSE_FILES = COPYING
 NCURSES_CONFIG_SCRIPTS = ncurses$(NCURSES_LIB_SUFFIX)6-config
 
 NCURSES_CONF_OPTS = \
diff --git a/buildroot/package/neardal/Config.in b/buildroot/package/neardal/Config.in
index c72928338..5f33ae495 100644
--- a/buildroot/package/neardal/Config.in
+++ b/buildroot/package/neardal/Config.in
@@ -5,7 +5,7 @@ config BR2_PACKAGE_NEARDAL
 	depends on BR2_USE_MMU # dbus
 	select BR2_PACKAGE_DBUS
 	select BR2_PACKAGE_DBUS_GLIB
-	select BR2_PACKAGE_READLINE if !BR2_PACKAGE_LIBEDIT
+	select BR2_PACKAGE_LIBEDIT
 	help
 	  Provides a simple C API to exchange data with the neard NFC
 	  manager daemon.
diff --git a/buildroot/package/neardal/neardal.mk b/buildroot/package/neardal/neardal.mk
index 388301193..f511201b9 100644
--- a/buildroot/package/neardal/neardal.mk
+++ b/buildroot/package/neardal/neardal.mk
@@ -7,20 +7,12 @@
 NEARDAL_VERSION = 33b54a55032b047fd885a5eb3592c169c0056c49
 NEARDAL_SITE = $(call github,connectivity,neardal,$(NEARDAL_VERSION))
 NEARDAL_INSTALL_STAGING = YES
-NEARDAL_LICENSE = GPL-2.0
+NEARDAL_LICENSE = LGPL-2.0
 NEARDAL_LICENSE_FILES = COPYING
 
-NEARDAL_DEPENDENCIES = host-pkgconf dbus dbus-glib
+NEARDAL_DEPENDENCIES = host-pkgconf dbus dbus-glib libedit
 NEARDAL_AUTORECONF = YES
 
-# Either readline or libedit are needed, and the Config.in file
-# guarantees at least one of them is enabled
-ifeq ($(BR2_PACKAGE_READLINE),y)
-NEARDAL_DEPENDENCIES += readline
-else ifeq ($(BR2_PACKAGE_LIBEDIT),y)
-NEARDAL_DEPENDENCIES += libedit
-endif
-
 define NEARDAL_INSTALL_NCL
 	$(INSTALL) -m 0755 -D $(@D)/ncl/ncl $(TARGET_DIR)/usr/bin/ncl
 endef
diff --git a/buildroot/package/netperf/Config.in b/buildroot/package/netperf/Config.in
index 2f36b1b0d..a935fde50 100644
--- a/buildroot/package/netperf/Config.in
+++ b/buildroot/package/netperf/Config.in
@@ -3,4 +3,4 @@ config BR2_PACKAGE_NETPERF
 	help
 	  Network performance benchmark tool
 
-	  http://www.netperf.org/
+	  https://hewlettpackard.github.io/netperf/
diff --git a/buildroot/package/nfs-utils/Config.in b/buildroot/package/nfs-utils/Config.in
index 055b711f0..4b0eb1510 100644
--- a/buildroot/package/nfs-utils/Config.in
+++ b/buildroot/package/nfs-utils/Config.in
@@ -6,7 +6,7 @@ config BR2_PACKAGE_NFS_UTILS
 	bool "nfs-utils"
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libtirpc, rpcbind
 	depends on BR2_USE_MMU # fork()
-	select BR2_PACKAGE_LIBTIRPC if !BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_PACKAGE_LIBTIRPC # IPv6 requires libtirpc
 	select BR2_PACKAGE_RPCBIND # runtime
 	help
 	  The NFS Linux kernel server.
diff --git a/buildroot/package/nfs-utils/nfs-utils.mk b/buildroot/package/nfs-utils/nfs-utils.mk
index 4bb62de1c..9ae02c003 100644
--- a/buildroot/package/nfs-utils/nfs-utils.mk
+++ b/buildroot/package/nfs-utils/nfs-utils.mk
@@ -10,7 +10,7 @@ NFS_UTILS_SITE = https://www.kernel.org/pub/linux/utils/nfs-utils/$(NFS_UTILS_VE
 NFS_UTILS_LICENSE = GPL-2.0+
 NFS_UTILS_LICENSE_FILES = COPYING
 NFS_UTILS_AUTORECONF = YES
-NFS_UTILS_DEPENDENCIES = host-pkgconf
+NFS_UTILS_DEPENDENCIES = host-pkgconf libtirpc
 
 NFS_UTILS_CONF_ENV = knfsd_cv_bsd_signals=no
 
@@ -19,7 +19,8 @@ NFS_UTILS_CONF_OPTS = \
 	--disable-nfsv41 \
 	--disable-gss \
 	--disable-uuid \
-	--disable-ipv6 \
+	--enable-tirpc \
+	--enable-ipv6 \
 	--without-tcp-wrappers \
 	--with-statedir=/run/nfs \
 	--with-rpcgen=internal
@@ -49,13 +50,6 @@ else
 NFS_UTILS_CONF_OPTS += --disable-caps
 endif
 
-ifeq ($(BR2_PACKAGE_LIBTIRPC),y)
-NFS_UTILS_CONF_OPTS += --enable-tirpc
-NFS_UTILS_DEPENDENCIES += libtirpc
-else
-NFS_UTILS_CONF_OPTS += --disable-tirpc
-endif
-
 define NFS_UTILS_INSTALL_FIXUP
 	cd $(TARGET_DIR) && rm -f $(NFS_UTILS_TARGETS_)
 	touch $(TARGET_DIR)/etc/exports
diff --git a/buildroot/package/nghttp2/nghttp2.hash b/buildroot/package/nghttp2/nghttp2.hash
index d000fd56c..e0512e891 100644
--- a/buildroot/package/nghttp2/nghttp2.hash
+++ b/buildroot/package/nghttp2/nghttp2.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 f75e8f228217f23aa5eabfbab140e061cda00b7c21e34c891ecfb248d663303f  nghttp2-1.32.0.tar.gz
+sha256 fc820a305e2f410fade1a3260f09229f15c0494fc089b0100312cd64a33a38c0  nghttp2-1.39.2.tar.gz
 sha256 6b94f3abc1aabd0c72a7c7d92a77f79dda7c8a0cb3df839a97890b4116a2de2a  COPYING
diff --git a/buildroot/package/nghttp2/nghttp2.mk b/buildroot/package/nghttp2/nghttp2.mk
index 20bfee75a..6a5ec7284 100644
--- a/buildroot/package/nghttp2/nghttp2.mk
+++ b/buildroot/package/nghttp2/nghttp2.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-NGHTTP2_VERSION = 1.32.0
+NGHTTP2_VERSION = 1.39.2
 NGHTTP2_SITE = https://github.com/nghttp2/nghttp2/releases/download/v$(NGHTTP2_VERSION)
 NGHTTP2_LICENSE = MIT
 NGHTTP2_LICENSE_FILES = COPYING
diff --git a/buildroot/package/nginx/0005-auto-unix-make-sys_nerr-guessing-cross-friendly.patch b/buildroot/package/nginx/0005-auto-unix-make-sys_nerr-guessing-cross-friendly.patch
index b4d8215b3..747a034ae 100644
--- a/buildroot/package/nginx/0005-auto-unix-make-sys_nerr-guessing-cross-friendly.patch
+++ b/buildroot/package/nginx/0005-auto-unix-make-sys_nerr-guessing-cross-friendly.patch
@@ -109,7 +109,7 @@ diff --git a/auto/unix b/auto/unix
 index 7dbf9d1..00a7370 100755
 --- a/auto/unix
 +++ b/auto/unix
-@@ -708,6 +708,10 @@ ngx_feature_incs='#include 
+@@ -736,6 +736,10 @@ ngx_feature_incs='#include 
                    #include '
  ngx_feature_path=
  ngx_feature_libs=
@@ -120,7 +120,7 @@ index 7dbf9d1..00a7370 100755
  ngx_feature_test='printf("%d", sys_nerr);'
  . auto/feature
  
-@@ -756,6 +760,12 @@ if [ $ngx_found = no ]; then
+@@ -784,6 +788,12 @@ if [ $ngx_found = no ]; then
      . auto/feature
  fi
  
diff --git a/buildroot/package/nginx/nginx.hash b/buildroot/package/nginx/nginx.hash
index 40dba402e..4df7906ee 100644
--- a/buildroot/package/nginx/nginx.hash
+++ b/buildroot/package/nginx/nginx.hash
@@ -1,4 +1,4 @@
 # Locally calculated after checking pgp signature
-sha256	8f22ea2f6c0e0a221b6ddc02b6428a3ff708e2ad55f9361102b1c9f4142bdf93	nginx-1.15.7.tar.gz
+sha256	f11c2a6dd1d3515736f0324857957db2de98be862461b5a542a3ac6188dbe32b	nginx-1.16.1.tar.gz
 # License files, locally calculated
-sha256	e18f05bcaad47528f8b21861d4a0fb9815ca1bbb4be946c51a51d36623758bcc	LICENSE
+sha256	28ad30e2f64bd89ac1287b4606906bb99ed04d9f4e13fb6564a0be9c8a23f509	LICENSE
diff --git a/buildroot/package/nginx/nginx.mk b/buildroot/package/nginx/nginx.mk
index 3bdd92b3f..08adcaec5 100644
--- a/buildroot/package/nginx/nginx.mk
+++ b/buildroot/package/nginx/nginx.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-NGINX_VERSION = 1.15.7
+NGINX_VERSION = 1.16.1
 NGINX_SITE = http://nginx.org/download
 NGINX_LICENSE = BSD-2-Clause
 NGINX_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/nodejs/Config.in b/buildroot/package/nodejs/Config.in
index d2846f8d5..e99544130 100644
--- a/buildroot/package/nodejs/Config.in
+++ b/buildroot/package/nodejs/Config.in
@@ -30,6 +30,7 @@ config BR2_PACKAGE_NODEJS
 	select BR2_PACKAGE_LIBHTTPPARSER
 	select BR2_PACKAGE_LIBUV
 	select BR2_PACKAGE_ZLIB
+	select BR2_PACKAGE_NGHTTP2
 	help
 	  Event-driven I/O server-side JavaScript environment based on
 	  V8.
diff --git a/buildroot/package/nodejs/nodejs.hash b/buildroot/package/nodejs/nodejs.hash
index ad8ad4ad9..ce987e683 100644
--- a/buildroot/package/nodejs/nodejs.hash
+++ b/buildroot/package/nodejs/nodejs.hash
@@ -1,5 +1,5 @@
-# From https://nodejs.org/dist/v8.15.1/SHASUMS256.txt
-sha256 6b6486a3f452624941f6e11dd5f878c298d43e9c21b5f43ca1721dc7ce25add1  node-v8.15.1.tar.xz
+# From https://nodejs.org/dist/v8.17.0/SHASUMS256.txt
+sha256 5b0d96db482b273f0324c299ead86ecfbc5d033516e5fc37c92cfccb933ef6ff  node-v8.17.0.tar.xz
 
 # Hash for license file
 sha256 b87be6c1479ed977481115869c2dd8b6d59e5ea55aa09939d6c898242121b2f5  LICENSE
diff --git a/buildroot/package/nodejs/nodejs.mk b/buildroot/package/nodejs/nodejs.mk
index 06d2eaad9..72346a516 100644
--- a/buildroot/package/nodejs/nodejs.mk
+++ b/buildroot/package/nodejs/nodejs.mk
@@ -4,11 +4,11 @@
 #
 ################################################################################
 
-NODEJS_VERSION = 8.15.1
+NODEJS_VERSION = 8.17.0
 NODEJS_SOURCE = node-v$(NODEJS_VERSION).tar.xz
 NODEJS_SITE = http://nodejs.org/dist/v$(NODEJS_VERSION)
 NODEJS_DEPENDENCIES = host-python host-nodejs c-ares \
-	libhttpparser libuv zlib \
+	libhttpparser libuv zlib nghttp2 \
 	$(call qstrip,$(BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL_DEPS))
 HOST_NODEJS_DEPENDENCIES = host-libopenssl host-python host-zlib
 NODEJS_LICENSE = MIT (core code); MIT, Apache and BSD family licenses (Bundled components)
@@ -20,6 +20,7 @@ NODEJS_CONF_OPTS = \
 	--shared-cares \
 	--shared-http-parser \
 	--shared-libuv \
+	--shared-nghttp2 \
 	--without-dtrace \
 	--without-etw \
 	--dest-os=linux
@@ -71,6 +72,7 @@ define HOST_NODEJS_BUILD_CMDS
 	$(HOST_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python2 \
 		$(MAKE) -C $(@D) \
 		$(HOST_CONFIGURE_OPTS) \
+		LDFLAGS.host="$(HOST_LDFLAGS)" \
 		NO_LOAD=cctest.target.mk \
 		PATH=$(@D)/bin:$(BR_PATH)
 endef
@@ -79,6 +81,7 @@ define HOST_NODEJS_INSTALL_CMDS
 	$(HOST_MAKE_ENV) PYTHON=$(HOST_DIR)/bin/python2 \
 		$(MAKE) -C $(@D) install \
 		$(HOST_CONFIGURE_OPTS) \
+		LDFLAGS.host="$(HOST_LDFLAGS)" \
 		NO_LOAD=cctest.target.mk \
 		PATH=$(@D)/bin:$(BR_PATH)
 endef
@@ -93,10 +96,23 @@ else ifeq ($(BR2_mipsel),y)
 NODEJS_CPU = mipsel
 else ifeq ($(BR2_arm),y)
 NODEJS_CPU = arm
-else ifeq ($(BR2_aarch64),y)
-NODEJS_CPU = arm64
 # V8 needs to know what floating point ABI the target is using.
 NODEJS_ARM_FP = $(GCC_TARGET_FLOAT_ABI)
+# it also wants to know which FPU to use, but only has support for
+# vfp, vfpv3, vfpv3-d16 and neon.
+ifeq ($(BR2_ARM_FPU_VFPV2),y)
+NODEJS_ARM_FPU = vfp
+# vfpv4 is a superset of vfpv3
+else ifeq ($(BR2_ARM_FPU_VFPV3)$(BR2_ARM_FPU_VFPV4),y)
+NODEJS_ARM_FPU = vfpv3
+# vfpv4-d16 is a superset of vfpv3-d16
+else ifeq ($(BR2_ARM_FPU_VFPV3D16)$(BR2_ARM_FPU_VFPV4D16),y)
+NODEJS_ARM_FPU = vfpv3-d16
+else ifeq ($(BR2_ARM_FPU_NEON),y)
+NODEJS_ARM_FPU = neon
+endif
+else ifeq ($(BR2_aarch64),y)
+NODEJS_CPU = arm64
 endif
 
 # MIPS architecture specific options
@@ -124,6 +140,7 @@ define NODEJS_CONFIGURE_CMDS
 		--prefix=/usr \
 		--dest-cpu=$(NODEJS_CPU) \
 		$(if $(NODEJS_ARM_FP),--with-arm-float-abi=$(NODEJS_ARM_FP)) \
+		$(if $(NODEJS_ARM_FPU),--with-arm-fpu=$(NODEJS_ARM_FPU)) \
 		$(if $(NODEJS_MIPS_ARCH_VARIANT),--with-mips-arch-variant=$(NODEJS_MIPS_ARCH_VARIANT)) \
 		$(if $(NODEJS_MIPS_FPU_MODE),--with-mips-fpu-mode=$(NODEJS_MIPS_FPU_MODE)) \
 		$(NODEJS_CONF_OPTS) \
diff --git a/buildroot/package/ntp/0003-override-shell.patch b/buildroot/package/ntp/0003-override-shell.patch
new file mode 100644
index 000000000..0161e6520
--- /dev/null
+++ b/buildroot/package/ntp/0003-override-shell.patch
@@ -0,0 +1,20 @@
+sntp/libopts/m4/libopts.m4: allow override shell with POSIX_SHELL
+
+Pull in fix from upstream AutoGen [1] to accept POSIX_SHELL from the
+environment during the configure step.
+
+[1] http://git.savannah.gnu.org/cgit/autogen.git/commit/?id=db064b9a252f3ef3d8db25411ea0edb0ff8ea758
+
+Signed-off-by: James Byrne 
+
+diff --git a/sntp/libopts/m4/libopts.m4 b/sntp/libopts/m4/libopts.m4
+--- a/sntp/libopts/m4/libopts.m4
++++ b/sntp/libopts/m4/libopts.m4
+@@ -114,6 +114,7 @@
+   AC_PROG_SED
+   [while :
+   do
++      test -x "$POSIX_SHELL" && break
+       POSIX_SHELL=`which bash`
+       test -x "$POSIX_SHELL" && break
+       POSIX_SHELL=`which dash`
diff --git a/buildroot/package/ntp/ntp.mk b/buildroot/package/ntp/ntp.mk
index d53fcc5d0..56050f4fe 100644
--- a/buildroot/package/ntp/ntp.mk
+++ b/buildroot/package/ntp/ntp.mk
@@ -10,7 +10,7 @@ NTP_SITE = https://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-$(NTP_VERSION_MAJO
 NTP_DEPENDENCIES = host-pkgconf libevent
 NTP_LICENSE = NTP
 NTP_LICENSE_FILES = COPYRIGHT
-NTP_CONF_ENV = ac_cv_lib_md5_MD5Init=no
+NTP_CONF_ENV = ac_cv_lib_md5_MD5Init=no POSIX_SHELL=/bin/sh
 NTP_CONF_OPTS = \
 	--with-shared \
 	--program-transform-name=s,,, \
diff --git a/buildroot/package/numactl/Config.in b/buildroot/package/numactl/Config.in
index 95057d3c3..8ea07bb85 100644
--- a/buildroot/package/numactl/Config.in
+++ b/buildroot/package/numactl/Config.in
@@ -9,4 +9,4 @@ config BR2_PACKAGE_NUMACTL
 	  and memory nodes. It does this by supplying a NUMA memory
 	  policy to the operating system before running your program.
 
-	  http://oss.sgi.com/projects/libnuma/
+	  https://github.com/numactl/numactl
diff --git a/buildroot/package/openblas/Config.in b/buildroot/package/openblas/Config.in
index 8e71a43f9..3f658c862 100644
--- a/buildroot/package/openblas/Config.in
+++ b/buildroot/package/openblas/Config.in
@@ -6,7 +6,7 @@ config BR2_PACKAGE_OPENBLAS_DEFAULT_TARGET
 	default "PRESCOTT"     if BR2_x86_prescott || BR2_x86_nocona
 	default "BANIAS"       if BR2_x86_pentium_m
 	default "CORE2"        if BR2_x86_core2
-	default "NEHALEM"      if BR2_x86_corei7 || BR2_x86_silvermont
+	default "NEHALEM"      if BR2_x86_corei7 || BR2_x86_silvermont || BR2_x86_westmere
 	default "SANDYBRIDGE"  if BR2_x86_corei7_avx
 	default "HASWELL"      if BR2_x86_core_avx2
 	default "ATOM"         if BR2_x86_atom
@@ -14,7 +14,7 @@ config BR2_PACKAGE_OPENBLAS_DEFAULT_TARGET
 	default "OPTERON"      if BR2_x86_opteron
 	default "OPTERON_SSE3" if BR2_x86_opteron_sse3
 	default "BARCELONA"    if BR2_x86_barcelona
-	default "JAGUAR"       if BR2_x86_jaguar
+	default "BOBCAT"       if BR2_x86_jaguar
 	default "STEAMROLLER"  if BR2_x86_steamroller
 	default "VIAC3"        if BR2_x86_c3 || BR2_x86_c32
 	default "POWER4"       if BR2_powerpc_power4
diff --git a/buildroot/package/opencv3/0001-3rdparty-protobuf-fix-compilation-issue-on-s390.patch b/buildroot/package/opencv3/0001-3rdparty-protobuf-fix-compilation-issue-on-s390.patch
deleted file mode 100644
index 7743eae53..000000000
--- a/buildroot/package/opencv3/0001-3rdparty-protobuf-fix-compilation-issue-on-s390.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From ac9ec55b37b2dd3b224144b4f20857a80719b750 Mon Sep 17 00:00:00 2001
-From: Loic Devulder 
-Date: Fri, 28 Sep 2018 15:33:18 +0200
-Subject: [PATCH] 3rdparty/protobuf: fix compilation issue on s390
-
-This commit fixes an issue while trying to compile
-on s390x architecture.
-
-This is simply a backport of a fixe already applied
-in official protobuf code:
-- https://github.com/protocolbuffers/protobuf/pull/3955
-
-Signed-off-by: Fabrice Fontaine 
-[Retrieved from:
-https://github.com/opencv/opencv/commit/ac9ec55b37b2dd3b224144b4f20857a80719b750]
----
- .../protobuf/stubs/atomicops_internals_generic_gcc.h      | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
-diff --git a/3rdparty/protobuf/src/google/protobuf/stubs/atomicops_internals_generic_gcc.h b/3rdparty/protobuf/src/google/protobuf/stubs/atomicops_internals_generic_gcc.h
-index 0b0b06ce6cf..075c406abab 100644
---- a/3rdparty/protobuf/src/google/protobuf/stubs/atomicops_internals_generic_gcc.h
-+++ b/3rdparty/protobuf/src/google/protobuf/stubs/atomicops_internals_generic_gcc.h
-@@ -146,6 +146,14 @@ inline Atomic64 NoBarrier_Load(volatile const Atomic64* ptr) {
-   return __atomic_load_n(ptr, __ATOMIC_RELAXED);
- }
- 
-+inline Atomic64 Release_CompareAndSwap(volatile Atomic64* ptr,
-+                                       Atomic64 old_value,
-+                                       Atomic64 new_value) {
-+  __atomic_compare_exchange_n(ptr, &old_value, new_value, false,
-+                              __ATOMIC_RELEASE, __ATOMIC_ACQUIRE);
-+  return old_value;
-+}
-+
- #endif // defined(__LP64__)
- 
- }  // namespace internal
diff --git a/buildroot/package/opencv3/Config.in b/buildroot/package/opencv3/Config.in
index 61405a7c6..cf7763d4a 100644
--- a/buildroot/package/opencv3/Config.in
+++ b/buildroot/package/opencv3/Config.in
@@ -140,6 +140,7 @@ config BR2_PACKAGE_OPENCV3_LIB_ML
 config BR2_PACKAGE_OPENCV3_LIB_OBJDETECT
 	bool "objdetect"
 	# opencv_core dependency is already enabled
+	select BR2_PACKAGE_OPENCV3_LIB_CALIB3D
 	select BR2_PACKAGE_OPENCV3_LIB_IMGPROC
 	select BR2_PACKAGE_OPENCV3_LIB_ML
 	help
@@ -157,11 +158,15 @@ config BR2_PACKAGE_OPENCV3_LIB_PYTHON
 	bool "python"
 	depends on BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3
 	depends on BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS
+	depends on BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL # python-numpy
 	select BR2_PACKAGE_PYTHON_NUMPY
 	help
 	  Include opencv_python module into the OpenCV build.  No
 	  python example is installed.
 
+comment "python support needs glibc or musl"
+	depends on !(BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_MUSL)
+
 config BR2_PACKAGE_OPENCV3_LIB_SHAPE
 	bool "shape"
 	# opencv_core dependency is already enabled
diff --git a/buildroot/package/opencv3/opencv3.hash b/buildroot/package/opencv3/opencv3.hash
index 34baf260d..4953d01a1 100644
--- a/buildroot/package/opencv3/opencv3.hash
+++ b/buildroot/package/opencv3/opencv3.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 4eef85759d5450b183459ff216b4c0fa43e87a4f6aa92c8af649f89336f002ec  opencv3-3.4.3.tar.gz
-sha256 fea311907cb6271b05ff5843b238e0f2edb6f204a3432975211030d20704b321  LICENSE
+sha256 b7ea364de7273cfb3b771a0d9c111b8b8dfb42ff2bcd2d84681902fb8f49892a  opencv3-3.4.9.tar.gz
+sha256 c3596f2f886631ac49af2c9a201ca559f850bb5726bdc25eacbe2369a70caad9  LICENSE
diff --git a/buildroot/package/opencv3/opencv3.mk b/buildroot/package/opencv3/opencv3.mk
index 3a2594b58..a6d795bd8 100644
--- a/buildroot/package/opencv3/opencv3.mk
+++ b/buildroot/package/opencv3/opencv3.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-OPENCV3_VERSION = 3.4.3
+OPENCV3_VERSION = 3.4.9
 OPENCV3_SITE = $(call github,opencv,opencv,$(OPENCV3_VERSION))
 OPENCV3_INSTALL_STAGING = YES
 OPENCV3_LICENSE = BSD-3-Clause
@@ -13,16 +13,15 @@ OPENCV3_SUPPORTS_IN_SOURCE_BUILD = NO
 
 OPENCV3_CXXFLAGS = $(TARGET_CXXFLAGS)
 
-# Uses __atomic_fetch_add_4
-ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
-OPENCV3_CXXFLAGS += -latomic
-endif
-
 # Fix c++11 build with missing std::exception_ptr
 ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_64735),y)
 OPENCV3_CXXFLAGS += -DCV__EXCEPTION_PTR=0
 endif
 
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y)
+OPENCV3_CXXFLAGS += -O0
+endif
+
 # OpenCV component options
 OPENCV3_CONF_OPTS += \
 	-DCMAKE_CXX_FLAGS="$(OPENCV3_CXXFLAGS)" \
@@ -30,7 +29,8 @@ OPENCV3_CONF_OPTS += \
 	-DBUILD_PERF_TESTS=$(if $(BR2_PACKAGE_OPENCV3_BUILD_PERF_TESTS),ON,OFF) \
 	-DBUILD_TESTS=$(if $(BR2_PACKAGE_OPENCV3_BUILD_TESTS),ON,OFF) \
 	-DBUILD_WITH_DEBUG_INFO=OFF \
-	-DDOWNLOAD_EXTERNAL_TEST_DATA=OFF
+	-DDOWNLOAD_EXTERNAL_TEST_DATA=OFF \
+	-DOPENCV_ENABLE_PKG_CONFIG=ON
 
 ifeq ($(BR2_PACKAGE_OPENCV3_BUILD_TESTS)$(BR2_PACKAGE_OPENCV3_BUILD_PERF_TESTS),)
 OPENCV3_CONF_OPTS += -DINSTALL_TEST=OFF
@@ -221,7 +221,7 @@ OPENCV3_CONF_OPTS += \
 	-DWITH_WEBP=OFF \
 	-DWITH_XINE=OFF
 
-OPENCV3_DEPENDENCIES += zlib
+OPENCV3_DEPENDENCIES += host-pkgconf zlib
 
 ifeq ($(BR2_PACKAGE_OPENCV3_WITH_FFMPEG),y)
 OPENCV3_CONF_OPTS += -DWITH_FFMPEG=ON
@@ -323,6 +323,7 @@ OPENCV3_CONF_OPTS += \
 	-DPYTHON2_PACKAGES_PATH=/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages \
 	-DPYTHON2_NUMPY_VERSION=$(PYTHON_NUMPY_VERSION)
 OPENCV3_DEPENDENCIES += python
+OPENCV3_KEEP_PY_FILES += usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/cv2/config*.py
 else
 OPENCV3_CONF_OPTS += \
 	-DBUILD_opencv_python2=OFF \
@@ -334,6 +335,7 @@ OPENCV3_CONF_OPTS += \
 	-DPYTHON3_PACKAGES_PATH=/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages \
 	-DPYTHON3_NUMPY_VERSION=$(PYTHON_NUMPY_VERSION)
 OPENCV3_DEPENDENCIES += python3
+OPENCV3_KEEP_PY_FILES += usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/cv2/config*.py
 endif
 OPENCV3_CONF_ENV += $(PKG_PYTHON_DISTUTILS_ENV)
 OPENCV3_DEPENDENCIES += python-numpy
diff --git a/buildroot/package/openldap/0004-revert-ITS-3977-fix-libtool-static-behavior-to-match.patch b/buildroot/package/openldap/0004-revert-ITS-3977-fix-libtool-static-behavior-to-match.patch
new file mode 100644
index 000000000..3a901c910
--- /dev/null
+++ b/buildroot/package/openldap/0004-revert-ITS-3977-fix-libtool-static-behavior-to-match.patch
@@ -0,0 +1,56 @@
+From 88a0442a0f01076914af80db40571fd52914ffa3 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Thu, 28 Mar 2019 23:52:38 +0100
+Subject: [PATCH] revert ITS#3977, fix libtool -static behavior to match docs
+
+Revert
+https://github.com/openldap/openldap/commit/7b6a088a2590fdad10286d10050b769e48554e13
+as this patch does not work with our buildroot patches
+
+Fixes:
+ - http://autobuild.buildroot.org/results/ab4f85fd21cacfaef6b0b43a38da6a4a1d32ecb6
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status: Not upstreamable]
+---
+ build/ltmain.sh | 9 ++-------
+ 1 file changed, 2 insertions(+), 7 deletions(-)
+
+diff --git a/build/ltmain.sh b/build/ltmain.sh
+index 1d079b91e..996dc7dad 100755
+--- a/build/ltmain.sh
++++ b/build/ltmain.sh
+@@ -1190,15 +1190,14 @@ EOF
+ 	  if test -n "$link_static_flag"; then
+ 	    dlopen_self=$dlopen_self_static
+ 	  fi
+-	  prefer_static_libs=yes
+ 	else
+ 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ 	    dlopen_self=$dlopen_self_static
+ 	  fi
+-	  prefer_static_libs=built
+ 	fi
+ 	build_libtool_libs=no
+ 	build_old_libs=yes
++	prefer_static_libs=yes
+ 	break
+ 	;;
+       esac
+@@ -2602,12 +2601,8 @@ EOF
+ 	fi
+ 
+ 	link_static=no # Whether the deplib will be linked statically
+-	use_static_libs=$prefer_static_libs
+-	if test "$use_static_libs" = built && test "$installed" = yes ; then
+-	  use_static_libs=no
+-	fi
+ 	if test -n "$library_names" &&
+-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
++	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ 	  if test "$installed" = no; then
+ 	    notinst_deplibs="$notinst_deplibs $lib"
+ 	    need_relink=yes
+-- 
+2.14.1
+
diff --git a/buildroot/package/openldap/openldap.hash b/buildroot/package/openldap/openldap.hash
index 37e2673c4..9ea1e7a55 100644
--- a/buildroot/package/openldap/openldap.hash
+++ b/buildroot/package/openldap/openldap.hash
@@ -1,7 +1,7 @@
-# From http://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.4.46.md5
-md5 829016c5a9f45c51adc50073ac6f9fd7  openldap-2.4.46.tgz
-# From http://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.4.46.sha1
-sha1 a9ae2273eb9bdd70090dafe0d018a3132606bef6  openldap-2.4.46.tgz
+# From http://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.4.48.md5
+md5 0729a0711fe096831dedc159e0bbe73f  openldap-2.4.48.tgz
+# From http://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.4.48.sha1
+sha1 c1984e80f6db038b317bf931866adb38e5537dcd  openldap-2.4.48.tgz
 # Locally computed
-sha256 9a90dcb86b99ae790ccab93b7585a31fbcbeec8c94bf0f7ab0ca0a87ea0c4b2d  openldap-2.4.46.tgz
+sha256 d9523ffcab5cd14b709fcf3cb4d04e8bc76bb8970113255f372bc74954c6074d  openldap-2.4.48.tgz
 sha256 310fe25c858a9515fc8c8d7d1f24a67c9496f84a91e0a0e41ea9975b1371e569  LICENSE
diff --git a/buildroot/package/openldap/openldap.mk b/buildroot/package/openldap/openldap.mk
index 3f00f2b7d..4417bb659 100644
--- a/buildroot/package/openldap/openldap.mk
+++ b/buildroot/package/openldap/openldap.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-OPENLDAP_VERSION = 2.4.46
+OPENLDAP_VERSION = 2.4.48
 OPENLDAP_SOURCE = openldap-$(OPENLDAP_VERSION).tgz
 OPENLDAP_SITE = http://www.openldap.org/software/download/OpenLDAP/openldap-release
 OPENLDAP_LICENSE = OpenLDAP Public License
diff --git a/buildroot/package/openpowerlink/Config.in b/buildroot/package/openpowerlink/Config.in
index 68ea75195..1a3dd62ac 100644
--- a/buildroot/package/openpowerlink/Config.in
+++ b/buildroot/package/openpowerlink/Config.in
@@ -50,7 +50,6 @@ config BR2_PACKAGE_OPENPOWERLINK_STACK_MONOLITHIC_USER_STACK_LIB
 config BR2_PACKAGE_OPENPOWERLINK_STACK_USERSPACE_DAEMON_LIB
 	bool "user-space pcap daemon"
 	select BR2_PACKAGE_LIBPCAP
-	select BR2_PACKAGE_OPENPOWERLINK_PCAP_DAEMON
 	help
 	  Compile openPOWERLINK application library which contains the
 	  interface to a Linux user space driver, and the Linux user
diff --git a/buildroot/package/opentyrian-data/Config.in b/buildroot/package/opentyrian-data/Config.in
index dd3b0c132..c0698c297 100644
--- a/buildroot/package/opentyrian-data/Config.in
+++ b/buildroot/package/opentyrian-data/Config.in
@@ -6,4 +6,4 @@ config BR2_PACKAGE_OPENTYRIAN_DATA
 	  original Tyrian 2.1 data files, that have been released as
 	  Freeware in 2004, are compatible.
 
-	  http://code.google.com/p/opentyrian/wiki/FAQ
+	  https://bitbucket.org/opentyrian/opentyrian/wiki/Home
diff --git a/buildroot/package/openvmtools/0003-Rename-poll-h-into-vm_poll-h-to-fix-build-failure-on-musl.patch b/buildroot/package/openvmtools/0003-Rename-poll-h-into-vm_poll-h-to-fix-build-failure-on-musl.patch
new file mode 100644
index 000000000..e9495ce43
--- /dev/null
+++ b/buildroot/package/openvmtools/0003-Rename-poll-h-into-vm_poll-h-to-fix-build-failure-on-musl.patch
@@ -0,0 +1,798 @@
+From 9d13e32e362ad3ce5169f49b7f0fe1d9380e558c Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Mon, 30 Sep 2019 13:32:35 +0200
+Subject: [PATCH] Rename poll.h into vm_poll.h to fix build failure on musl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+musl libc redirects include of sys/poll.h to poll.h. But since poll.h is
+also a local header file, the musl libc header is never included. This
+leads to the following build failure:
+
+In file included from asyncsocket.c:73:0:
+.../host/i586-buildroot-linux-musl/sysroot/usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include  to  [-Wcpp]
+ #warning redirecting incorrect #include  to 
+asyncsocket.c: In function ‘AsyncTCPSocketPollWork’:
+asyncsocket.c:2537:13: error: invalid use of undefined type ‘struct pollfd’
+          pfd[i].fd = asock[i]->fd;
+             ^
+asyncsocket.c:2537:13: error: dereferencing pointer to incomplete type ‘struct pollfd’
+asyncsocket.c:2538:13: error: invalid use of undefined type ‘struct pollfd’
+          pfd[i].events = read ? POLLIN : POLLOUT;
+             ^
+asyncsocket.c:2538:33: error: ‘POLLIN’ undeclared (first use in this function); did you mean ‘POLL_IN’?
+          pfd[i].events = read ? POLLIN : POLLOUT;
+
+So rename poll.h into vm_poll.h as suggested by srowe in
+https://github.com/vmware/open-vm-tools/issues/359#issuecomment-533529956
+
+Fixes:
+ - http://autobuild.buildroot.org/results/4f575ef42bbc4387a07e396205052b2da081c64d
+
+Fix #359
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status: https://github.com/vmware/open-vm-tools/pull/383]
+---
+ lib/asyncsocket/asyncsocket.c |   4 +-
+ lib/hgfsServer/hgfsServer.c   |   2 +-
+ lib/include/asyncsocket.h     |   2 +-
+ lib/include/poll.h            | 330 --------------------
+ lib/include/pollImpl.h        |   2 +-
+ lib/include/vm_poll.h         | 330 ++++++++++++++++++++
+ lib/rpcIn/rpcin.c             |   2 +-
+ 7 files changed, 336 insertions(+), 336 deletions(-)
+ delete mode 100644 open-vm-tools/lib/include/poll.h
+ create mode 100644 open-vm-tools/lib/include/vm_poll.h
+
+diff --git a/lib/asyncsocket/asyncsocket.c b/lib/asyncsocket/asyncsocket.c
+index 102638cc..01181a95 100644
+--- a/lib/asyncsocket/asyncsocket.c
++++ b/lib/asyncsocket/asyncsocket.c
+@@ -69,8 +69,8 @@
+ #else
+ #include 
+ #include 
++#include 
+ #include 
+-#include 
+ #include 
+ #include 
+ #include 
+@@ -86,7 +86,7 @@
+ #include "random.h"
+ #include "asyncsocket.h"
+ #include "asyncSocketBase.h"
+-#include "poll.h"
++#include "vm_poll.h"
+ #include "log.h"
+ #include "err.h"
+ #include "hostinfo.h"
+diff --git a/lib/hgfsServer/hgfsServer.c b/lib/hgfsServer/hgfsServer.c
+index 46224551..fc691286 100644
+--- a/lib/hgfsServer/hgfsServer.c
++++ b/lib/hgfsServer/hgfsServer.c
+@@ -48,7 +48,7 @@
+ #include "hgfsServerOplock.h"
+ #include "hgfsDirNotify.h"
+ #include "userlock.h"
+-#include "poll.h"
++#include "vm_poll.h"
+ #include "mutexRankLib.h"
+ #include "vm_basic_asm.h"
+ #include "unicodeOperations.h"
+diff --git a/lib/include/asyncsocket.h b/lib/include/asyncsocket.h
+index 95a5e464..a4b4e5aa 100644
+--- a/lib/include/asyncsocket.h
++++ b/lib/include/asyncsocket.h
+@@ -164,7 +164,7 @@ typedef struct AsyncSocket AsyncSocket;
+  * Or the client can specify its favorite poll class and locking behavior.
+  * Use of IVmdbPoll is only supported for regular sockets and for Attach.
+  */
+-#include "poll.h"
++#include "vm_poll.h"
+ struct IVmdbPoll;
+ typedef struct AsyncSocketPollParams {
+    int flags;               /* Default 0, only POLL_FLAG_NO_BULL is valid */
+diff --git a/lib/include/poll.h b/lib/include/poll.h
+deleted file mode 100644
+index 6acd4f35..00000000
+--- a/lib/include/poll.h
++++ /dev/null
+@@ -1,330 +0,0 @@
+-/*********************************************************
+- * Copyright (C) 1998-2018 VMware, Inc. All rights reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU Lesser General Public License as published
+- * by the Free Software Foundation version 2.1 and no later version.
+- *
+- * This program is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+- * or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
+- * License for more details.
+- *
+- * You should have received a copy of the GNU Lesser General Public License
+- * along with this program; if not, write to the Free Software Foundation, Inc.,
+- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
+- *
+- *********************************************************/
+-
+-/*********************************************************
+- * The contents of this file are subject to the terms of the Common
+- * Development and Distribution License (the "License") version 1.0
+- * and no later version.  You may not use this file except in
+- * compliance with the License.
+- *
+- * You can obtain a copy of the License at
+- *         http://www.opensource.org/licenses/cddl1.php
+- *
+- * See the License for the specific language governing permissions
+- * and limitations under the License.
+- *
+- *********************************************************/
+-
+-
+-#ifndef _POLL_H_
+-#define _POLL_H_
+-
+-#define INCLUDE_ALLOW_USERLEVEL
+-#define INCLUDE_ALLOW_VMCORE
+-#include "includeCheck.h"
+-
+-#include "vm_basic_types.h"
+-#include "vm_basic_defs.h"
+-#include "vmware.h"
+-#include "userlock.h"
+-
+-#if defined(__cplusplus)
+-extern "C" {
+-#endif
+-
+-#ifdef _WIN32
+-#define HZ 100
+-#elif defined linux
+-#include 
+-#elif __APPLE__
+-#include 
+-/*
+- * Old SDKs don't define TARGET_OS_IPHONE at all.
+- * New ones define it to 0 on Mac OS X, 1 on iOS.
+- */
+-#if !defined(TARGET_OS_IPHONE) || TARGET_OS_IPHONE == 0
+-#include 
+-#endif
+-#include 
+-#define HZ 100
+-#endif
+-#ifdef __ANDROID__
+-/*
+- *  of android should be included, but its name is same
+- * with this file. So its content is put here to avoid conflict.
+- */
+-#include 
+-#define HZ 100
+-typedef unsigned int  nfds_t;
+-int poll(struct pollfd *, nfds_t, long);
+-#endif
+-
+-
+-/*
+- * Poll event types: each type has a different reason for firing,
+- * or condition that must be met before firing.
+- */
+-
+-typedef enum {
+-   /*
+-    * Actual Poll queue types against which you can register callbacks.
+-    */
+-   POLL_VIRTUALREALTIME = -1, /* Negative because it doesn't have its own Q */
+-   POLL_VTIME = 0,
+-   POLL_REALTIME,
+-   POLL_DEVICE,
+-   POLL_MAIN_LOOP,
+-   POLL_NUM_QUEUES
+-} PollEventType;
+-
+-
+-/*
+- * Classes of events
+- *
+- * These are the predefined classes.  More can be declared
+- * with Poll_AllocClass().
+- */
+-
+-typedef enum PollClass {
+-   POLL_CLASS_MAIN,
+-   POLL_CLASS_PAUSE,
+-   POLL_CLASS_IPC,
+-   POLL_CLASS_CPT,
+-   POLL_CLASS_MKS,
+-   POLL_FIXED_CLASSES,
+-   POLL_DEFAULT_FIXED_CLASSES,
+-   /* Size enum to maximum */
+-   POLL_MAX_CLASSES = 31,
+-} PollClass;
+-
+-/*
+- * Do not use; Special pseudo private poll class supported by
+- * PollDefault only
+- */
+-#define POLL_DEFAULT_CLASS_NET POLL_FIXED_CLASSES
+-#define POLL_DEFAULT_CS_NET    PollClassSet_Singleton(POLL_DEFAULT_CLASS_NET)
+-
+-/*
+- * Each callback is registered in a set of classes
+- */
+-
+-typedef struct PollClassSet {
+-   uintptr_t bits;
+-} PollClassSet;
+-
+-/* An empty PollClassSet. */
+-static INLINE PollClassSet
+-PollClassSet_Empty(void)
+-{
+-   PollClassSet set = { 0 };
+-   return set;
+-}
+-
+-/* A PollClassSet with the single member. */
+-static INLINE PollClassSet
+-PollClassSet_Singleton(PollClass c)
+-{
+-   PollClassSet s = PollClassSet_Empty();
+-
+-   ASSERT_ON_COMPILE(POLL_MAX_CLASSES < sizeof s.bits * 8);
+-   ASSERT(c < POLL_MAX_CLASSES);
+-
+-   s.bits = CONST3264U(1) << c;
+-   return s;
+-}
+-
+-/* Combine two PollClassSets. */
+-static INLINE PollClassSet
+-PollClassSet_Union(PollClassSet lhs, PollClassSet rhs)
+-{
+-   PollClassSet set;
+-   set.bits = lhs.bits | rhs.bits;
+-   return set;
+-}
+-
+-/* Add single class to PollClassSet. */
+-static INLINE PollClassSet
+-PollClassSet_Include(PollClassSet set, PollClass c)
+-{
+-   return PollClassSet_Union(set, PollClassSet_Singleton(c));
+-}
+-
+-
+-#define POLL_CS_MAIN    PollClassSet_Singleton(POLL_CLASS_MAIN)
+-#define POLL_CS_PAUSE   PollClassSet_Union(POLL_CS_MAIN,            \
+-                           PollClassSet_Singleton(POLL_CLASS_PAUSE))
+-#define POLL_CS_CPT     PollClassSet_Union(POLL_CS_PAUSE,           \
+-                           PollClassSet_Singleton(POLL_CLASS_CPT))
+-#define POLL_CS_IPC     PollClassSet_Union(POLL_CS_CPT,             \
+-                           PollClassSet_Singleton(POLL_CLASS_IPC))
+-#define POLL_CS_VMDB    POLL_CS_PAUSE /* POLL_CLASS_VMDB is retired */
+-#define POLL_CS_MKS	PollClassSet_Singleton(POLL_CLASS_MKS)
+-/* 
+- * DANGER.  You don't need POLL_CS_ALWAYS.  Really.  So don't use it.
+- */
+-#define POLL_CS_ALWAYS  PollClassSet_Union(POLL_CS_CPT, POLL_CS_IPC)
+-
+-/*
+- * Poll class-set taxonomy:
+- * POLL_CS_MAIN
+- *    - Unless you NEED another class, use POLL_CS_MAIN.
+- * POLL_CS_PAUSE
+- *    - For callbacks that must occur even if the guest is paused.
+- *      Most VMDB or Foundry commands are in this category.
+- * POLL_CS_CPT
+- *    - Only for callbacks which can trigger intermediate Checkpoint 
+- *      transitions.
+- *      The ONLY such callback is Migrate.
+- * POLL_CS_IPC
+- *    - Only for callbacks which can contain Msg_(Post|Hint|Question) 
+- *      responses, and for signal handlers (why)?
+- *      Vigor, VMDB, and Foundry can contain Msg_* responses.
+- * POLL_CS_MKS
+- *    - Callback runs in MKS thread.
+- * POLL_CS_ALWAYS
+- *    - Only for events that must be processed immediately.
+- *      The ONLY such callback is OvhdMemVmxSizeCheck.
+- */
+-
+-
+-/*
+- * Poll_Callback flags
+- */
+-
+-#define POLL_FLAG_PERIODIC		0x01    // keep after firing
+-#define POLL_FLAG_REMOVE_AT_POWEROFF	0x02  	// self-explanatory
+-#define POLL_FLAG_READ			0x04	// device is ready for reading
+-#define POLL_FLAG_WRITE			0x08	// device is ready for writing
+-#define POLL_FLAG_SOCKET                0x10    // device is a Windows socket
+-#define POLL_FLAG_NO_BULL               0x20    // callback does its own locking
+-#define POLL_FLAG_WINSOCK               0x40    // Winsock style write events
+-#define POLL_FLAG_FD                    0x80    // device is a Windows file descriptor.
+-#define POLL_FLAG_ACCEPT_INVALID_FDS    0x100   // For broken 3rd party libs, e.g. curl
+-#define POLL_FLAG_THUNK_TO_WND          0x200   // thunk callback to window message loop
+-
+-
+-typedef void (*PollerFunction)(void *clientData);
+-typedef void (*PollerFireWrapper)(PollerFunction func,
+-                                  void *funcData,
+-                                  void *wrapperData);
+-typedef Bool (*PollerErrorFn)(const char *errorStr);
+-
+-/*
+- * Initialisers:
+- *
+- *      For the sake of convenience, we declare the initialisers
+- *      for custom implmentations here, even though the actual
+- *      implementations are distinct from the core poll code.
+- */
+-
+-typedef struct PollOptions {
+-   Bool locked;           // Use internal MXUser for locking
+-   Bool allowFullQueue;   // Don't assert when device event queue is full.
+-   VThreadID windowsMsgThread;       // thread that processes Windows messages
+-   PollerFireWrapper fireWrapperFn;  // optional; may be useful for stats
+-   void *fireWrapperData; // optional
+-   PollerErrorFn errorFn; // optional; called upon unrecoverable error
+-} PollOptions;
+-
+-
+-void Poll_InitDefault(void);
+-void Poll_InitDefaultEx(const PollOptions *opts);
+-void Poll_InitGtk(void); // On top of glib for Linux
+-void Poll_InitCF(void);  // On top of CoreFoundation for OSX
+-
+-
+-/*
+- * Functions
+- */
+-int Poll_SocketPair(Bool vmci, Bool stream, int fds[2]);
+-void Poll_Loop(Bool loop, Bool *exit, PollClass c);
+-void Poll_LoopTimeout(Bool loop, Bool *exit, PollClass c, int timeout);
+-Bool Poll_LockingEnabled(void);
+-void Poll_Exit(void);
+-
+-
+-/*
+- * Poll_Callback adds a callback regardless of whether an identical one exists.
+- * The exception to this rule is POLL_DEVICE callbacks: there is a maximum of
+- * one read and one write callback per fd.
+- *
+- * Poll_CallbackRemove removes one callback. If there are multiple identical
+- * callbacks, which one is removed is an implementation detail. Note that in
+- * the case of POLL_DEVICE and POLL_REALTIME callbacks, the fd/delay used to
+- * create the callback is not specified when removing, so all callbacks
+- * of those types with the same flags, function, and clientData are considered
+- * "identical" even if their fd/delay differed.
+- */
+-
+-VMwareStatus Poll_Callback(PollClassSet classSet,
+-                           int flags,
+-                           PollerFunction f,
+-                           void *clientData,
+-                           PollEventType type,
+-                           PollDevHandle info, // fd/microsec delay
+-                           MXUserRecLock *lck);
+-Bool Poll_CallbackRemove(PollClassSet classSet,
+-                         int flags,
+-                         PollerFunction f,
+-                         void *clientData,
+-                         PollEventType type);
+-Bool Poll_CallbackRemoveOneByCB(PollClassSet classSet,
+-                                int flags,
+-                                PollerFunction f,
+-                                PollEventType type,
+-                                void **clientData);
+-
+-void Poll_NotifyChange(PollClassSet classSet);
+-
+-/*
+- * Wrappers for Poll_Callback and Poll_CallbackRemove that present
+- * simpler subsets of those interfaces.
+- */
+-
+-VMwareStatus Poll_CB_Device(PollerFunction f,
+-                            void *clientData,
+-                            PollDevHandle device,
+-                            Bool periodic);
+-
+-Bool Poll_CB_DeviceRemove(PollerFunction f,
+-                          void *clientData,
+-                          Bool periodic);
+-
+-
+-VMwareStatus Poll_CB_RTime(PollerFunction f,
+-                           void *clientData,
+-                           int64 delay,   // microseconds
+-                           Bool periodic,
+-                           MXUserRecLock *lock);
+-
+-Bool Poll_CB_RTimeRemove(PollerFunction f,
+-                         void *clientData,
+-                         Bool periodic);
+-
+-
+-#ifdef _WIN32
+-void Poll_SetPumpsWindowsMessages(Bool pumps);
+-void Poll_SetWindowMessageRecipient(HWND hWnd, UINT msg, Bool alwaysThunk);
+-Bool Poll_FireWndCallback(void *lparam);
+-#endif
+-
+-#if defined(__cplusplus)
+-}  // extern "C"
+-#endif
+-
+-#endif // _POLL_H_
+diff --git a/lib/include/pollImpl.h b/lib/include/pollImpl.h
+index 46442e55..8bc66997 100644
+--- a/lib/include/pollImpl.h
++++ b/lib/include/pollImpl.h
+@@ -44,7 +44,7 @@
+ #define INCLUDE_ALLOW_USERLEVEL
+ #include "includeCheck.h"
+ 
+-#include "poll.h"
++#include "vm_poll.h"
+ #include "vm_basic_asm.h"
+ 
+ #if defined(__cplusplus)
+diff --git a/lib/include/vm_poll.h b/lib/include/vm_poll.h
+new file mode 100644
+index 00000000..6acd4f35
+--- /dev/null
++++ b/lib/include/vm_poll.h
+@@ -0,0 +1,330 @@
++/*********************************************************
++ * Copyright (C) 1998-2018 VMware, Inc. All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU Lesser General Public License as published
++ * by the Free Software Foundation version 2.1 and no later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
++ * or FITNESS FOR A PARTICULAR PURPOSE.  See the Lesser GNU General Public
++ * License for more details.
++ *
++ * You should have received a copy of the GNU Lesser General Public License
++ * along with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA.
++ *
++ *********************************************************/
++
++/*********************************************************
++ * The contents of this file are subject to the terms of the Common
++ * Development and Distribution License (the "License") version 1.0
++ * and no later version.  You may not use this file except in
++ * compliance with the License.
++ *
++ * You can obtain a copy of the License at
++ *         http://www.opensource.org/licenses/cddl1.php
++ *
++ * See the License for the specific language governing permissions
++ * and limitations under the License.
++ *
++ *********************************************************/
++
++
++#ifndef _POLL_H_
++#define _POLL_H_
++
++#define INCLUDE_ALLOW_USERLEVEL
++#define INCLUDE_ALLOW_VMCORE
++#include "includeCheck.h"
++
++#include "vm_basic_types.h"
++#include "vm_basic_defs.h"
++#include "vmware.h"
++#include "userlock.h"
++
++#if defined(__cplusplus)
++extern "C" {
++#endif
++
++#ifdef _WIN32
++#define HZ 100
++#elif defined linux
++#include 
++#elif __APPLE__
++#include 
++/*
++ * Old SDKs don't define TARGET_OS_IPHONE at all.
++ * New ones define it to 0 on Mac OS X, 1 on iOS.
++ */
++#if !defined(TARGET_OS_IPHONE) || TARGET_OS_IPHONE == 0
++#include 
++#endif
++#include 
++#define HZ 100
++#endif
++#ifdef __ANDROID__
++/*
++ *  of android should be included, but its name is same
++ * with this file. So its content is put here to avoid conflict.
++ */
++#include 
++#define HZ 100
++typedef unsigned int  nfds_t;
++int poll(struct pollfd *, nfds_t, long);
++#endif
++
++
++/*
++ * Poll event types: each type has a different reason for firing,
++ * or condition that must be met before firing.
++ */
++
++typedef enum {
++   /*
++    * Actual Poll queue types against which you can register callbacks.
++    */
++   POLL_VIRTUALREALTIME = -1, /* Negative because it doesn't have its own Q */
++   POLL_VTIME = 0,
++   POLL_REALTIME,
++   POLL_DEVICE,
++   POLL_MAIN_LOOP,
++   POLL_NUM_QUEUES
++} PollEventType;
++
++
++/*
++ * Classes of events
++ *
++ * These are the predefined classes.  More can be declared
++ * with Poll_AllocClass().
++ */
++
++typedef enum PollClass {
++   POLL_CLASS_MAIN,
++   POLL_CLASS_PAUSE,
++   POLL_CLASS_IPC,
++   POLL_CLASS_CPT,
++   POLL_CLASS_MKS,
++   POLL_FIXED_CLASSES,
++   POLL_DEFAULT_FIXED_CLASSES,
++   /* Size enum to maximum */
++   POLL_MAX_CLASSES = 31,
++} PollClass;
++
++/*
++ * Do not use; Special pseudo private poll class supported by
++ * PollDefault only
++ */
++#define POLL_DEFAULT_CLASS_NET POLL_FIXED_CLASSES
++#define POLL_DEFAULT_CS_NET    PollClassSet_Singleton(POLL_DEFAULT_CLASS_NET)
++
++/*
++ * Each callback is registered in a set of classes
++ */
++
++typedef struct PollClassSet {
++   uintptr_t bits;
++} PollClassSet;
++
++/* An empty PollClassSet. */
++static INLINE PollClassSet
++PollClassSet_Empty(void)
++{
++   PollClassSet set = { 0 };
++   return set;
++}
++
++/* A PollClassSet with the single member. */
++static INLINE PollClassSet
++PollClassSet_Singleton(PollClass c)
++{
++   PollClassSet s = PollClassSet_Empty();
++
++   ASSERT_ON_COMPILE(POLL_MAX_CLASSES < sizeof s.bits * 8);
++   ASSERT(c < POLL_MAX_CLASSES);
++
++   s.bits = CONST3264U(1) << c;
++   return s;
++}
++
++/* Combine two PollClassSets. */
++static INLINE PollClassSet
++PollClassSet_Union(PollClassSet lhs, PollClassSet rhs)
++{
++   PollClassSet set;
++   set.bits = lhs.bits | rhs.bits;
++   return set;
++}
++
++/* Add single class to PollClassSet. */
++static INLINE PollClassSet
++PollClassSet_Include(PollClassSet set, PollClass c)
++{
++   return PollClassSet_Union(set, PollClassSet_Singleton(c));
++}
++
++
++#define POLL_CS_MAIN    PollClassSet_Singleton(POLL_CLASS_MAIN)
++#define POLL_CS_PAUSE   PollClassSet_Union(POLL_CS_MAIN,            \
++                           PollClassSet_Singleton(POLL_CLASS_PAUSE))
++#define POLL_CS_CPT     PollClassSet_Union(POLL_CS_PAUSE,           \
++                           PollClassSet_Singleton(POLL_CLASS_CPT))
++#define POLL_CS_IPC     PollClassSet_Union(POLL_CS_CPT,             \
++                           PollClassSet_Singleton(POLL_CLASS_IPC))
++#define POLL_CS_VMDB    POLL_CS_PAUSE /* POLL_CLASS_VMDB is retired */
++#define POLL_CS_MKS	PollClassSet_Singleton(POLL_CLASS_MKS)
++/* 
++ * DANGER.  You don't need POLL_CS_ALWAYS.  Really.  So don't use it.
++ */
++#define POLL_CS_ALWAYS  PollClassSet_Union(POLL_CS_CPT, POLL_CS_IPC)
++
++/*
++ * Poll class-set taxonomy:
++ * POLL_CS_MAIN
++ *    - Unless you NEED another class, use POLL_CS_MAIN.
++ * POLL_CS_PAUSE
++ *    - For callbacks that must occur even if the guest is paused.
++ *      Most VMDB or Foundry commands are in this category.
++ * POLL_CS_CPT
++ *    - Only for callbacks which can trigger intermediate Checkpoint 
++ *      transitions.
++ *      The ONLY such callback is Migrate.
++ * POLL_CS_IPC
++ *    - Only for callbacks which can contain Msg_(Post|Hint|Question) 
++ *      responses, and for signal handlers (why)?
++ *      Vigor, VMDB, and Foundry can contain Msg_* responses.
++ * POLL_CS_MKS
++ *    - Callback runs in MKS thread.
++ * POLL_CS_ALWAYS
++ *    - Only for events that must be processed immediately.
++ *      The ONLY such callback is OvhdMemVmxSizeCheck.
++ */
++
++
++/*
++ * Poll_Callback flags
++ */
++
++#define POLL_FLAG_PERIODIC		0x01    // keep after firing
++#define POLL_FLAG_REMOVE_AT_POWEROFF	0x02  	// self-explanatory
++#define POLL_FLAG_READ			0x04	// device is ready for reading
++#define POLL_FLAG_WRITE			0x08	// device is ready for writing
++#define POLL_FLAG_SOCKET                0x10    // device is a Windows socket
++#define POLL_FLAG_NO_BULL               0x20    // callback does its own locking
++#define POLL_FLAG_WINSOCK               0x40    // Winsock style write events
++#define POLL_FLAG_FD                    0x80    // device is a Windows file descriptor.
++#define POLL_FLAG_ACCEPT_INVALID_FDS    0x100   // For broken 3rd party libs, e.g. curl
++#define POLL_FLAG_THUNK_TO_WND          0x200   // thunk callback to window message loop
++
++
++typedef void (*PollerFunction)(void *clientData);
++typedef void (*PollerFireWrapper)(PollerFunction func,
++                                  void *funcData,
++                                  void *wrapperData);
++typedef Bool (*PollerErrorFn)(const char *errorStr);
++
++/*
++ * Initialisers:
++ *
++ *      For the sake of convenience, we declare the initialisers
++ *      for custom implmentations here, even though the actual
++ *      implementations are distinct from the core poll code.
++ */
++
++typedef struct PollOptions {
++   Bool locked;           // Use internal MXUser for locking
++   Bool allowFullQueue;   // Don't assert when device event queue is full.
++   VThreadID windowsMsgThread;       // thread that processes Windows messages
++   PollerFireWrapper fireWrapperFn;  // optional; may be useful for stats
++   void *fireWrapperData; // optional
++   PollerErrorFn errorFn; // optional; called upon unrecoverable error
++} PollOptions;
++
++
++void Poll_InitDefault(void);
++void Poll_InitDefaultEx(const PollOptions *opts);
++void Poll_InitGtk(void); // On top of glib for Linux
++void Poll_InitCF(void);  // On top of CoreFoundation for OSX
++
++
++/*
++ * Functions
++ */
++int Poll_SocketPair(Bool vmci, Bool stream, int fds[2]);
++void Poll_Loop(Bool loop, Bool *exit, PollClass c);
++void Poll_LoopTimeout(Bool loop, Bool *exit, PollClass c, int timeout);
++Bool Poll_LockingEnabled(void);
++void Poll_Exit(void);
++
++
++/*
++ * Poll_Callback adds a callback regardless of whether an identical one exists.
++ * The exception to this rule is POLL_DEVICE callbacks: there is a maximum of
++ * one read and one write callback per fd.
++ *
++ * Poll_CallbackRemove removes one callback. If there are multiple identical
++ * callbacks, which one is removed is an implementation detail. Note that in
++ * the case of POLL_DEVICE and POLL_REALTIME callbacks, the fd/delay used to
++ * create the callback is not specified when removing, so all callbacks
++ * of those types with the same flags, function, and clientData are considered
++ * "identical" even if their fd/delay differed.
++ */
++
++VMwareStatus Poll_Callback(PollClassSet classSet,
++                           int flags,
++                           PollerFunction f,
++                           void *clientData,
++                           PollEventType type,
++                           PollDevHandle info, // fd/microsec delay
++                           MXUserRecLock *lck);
++Bool Poll_CallbackRemove(PollClassSet classSet,
++                         int flags,
++                         PollerFunction f,
++                         void *clientData,
++                         PollEventType type);
++Bool Poll_CallbackRemoveOneByCB(PollClassSet classSet,
++                                int flags,
++                                PollerFunction f,
++                                PollEventType type,
++                                void **clientData);
++
++void Poll_NotifyChange(PollClassSet classSet);
++
++/*
++ * Wrappers for Poll_Callback and Poll_CallbackRemove that present
++ * simpler subsets of those interfaces.
++ */
++
++VMwareStatus Poll_CB_Device(PollerFunction f,
++                            void *clientData,
++                            PollDevHandle device,
++                            Bool periodic);
++
++Bool Poll_CB_DeviceRemove(PollerFunction f,
++                          void *clientData,
++                          Bool periodic);
++
++
++VMwareStatus Poll_CB_RTime(PollerFunction f,
++                           void *clientData,
++                           int64 delay,   // microseconds
++                           Bool periodic,
++                           MXUserRecLock *lock);
++
++Bool Poll_CB_RTimeRemove(PollerFunction f,
++                         void *clientData,
++                         Bool periodic);
++
++
++#ifdef _WIN32
++void Poll_SetPumpsWindowsMessages(Bool pumps);
++void Poll_SetWindowMessageRecipient(HWND hWnd, UINT msg, Bool alwaysThunk);
++Bool Poll_FireWndCallback(void *lparam);
++#endif
++
++#if defined(__cplusplus)
++}  // extern "C"
++#endif
++
++#endif // _POLL_H_
+diff --git a/lib/rpcIn/rpcin.c b/lib/rpcIn/rpcin.c
+index 47a3380e..660382c6 100644
+--- a/lib/rpcIn/rpcin.c
++++ b/lib/rpcIn/rpcin.c
+@@ -57,7 +57,7 @@
+ 
+ #if defined(VMTOOLS_USE_VSOCKET)
+ #  include 
+-#  include "poll.h"
++#  include "vm_poll.h"
+ #  include "asyncsocket.h"
+ #  include "vmci_defs.h"
+ #include "dataMap.h"
+-- 
+2.23.0
+
diff --git a/buildroot/package/openvmtools/0004-Remove-assumptions-about-glibc-being-only-libc-imple.patch b/buildroot/package/openvmtools/0004-Remove-assumptions-about-glibc-being-only-libc-imple.patch
new file mode 100644
index 000000000..5960006f2
--- /dev/null
+++ b/buildroot/package/openvmtools/0004-Remove-assumptions-about-glibc-being-only-libc-imple.patch
@@ -0,0 +1,27 @@
+From a0983d84185f04c4e40778fe951fde4439894882 Mon Sep 17 00:00:00 2001
+From: Khem Raj 
+Date: Sun, 16 Jul 2017 07:37:03 -0700
+Subject: [PATCH] Remove assumptions about glibc being only libc
+ implementation on linux
+
+Signed-off-by: Khem Raj 
+[Retrieved (and updated to work on current version) from:
+http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-support/open-vm-tools/open-vm-tools/0001-Remove-assumptions-about-glibc-being-only-libc-imple.patch?h=sumo]
+Signed-off-by: Fabrice Fontaine 
+---
+ open-vm-tools/lib/file/fileIOPosix.c      | 2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+Index: open-vm-tools/lib/file/fileIOPosix.c
+===================================================================
+--- open-vm-tools.orig/lib/file/fileIOPosix.c
++++ open-vm-tools/lib/file/fileIOPosix.c
+@@ -205,7 +205,7 @@ static AlignedPool alignedPool;
+  * are not available in any header file.
+  */
+ 
+-#if defined(__linux__) && !defined(__ANDROID__)
++#if defined(__linux__) && defined(__GLIBC__)
+    #if defined(_FILE_OFFSET_BITS) && (_FILE_OFFSET_BITS == 64)
+       /*
+        * We want preadv/pwritev. But due to FOB=64, the symbols are -64.
diff --git a/buildroot/package/openvmtools/0005-Use-configure-test-for-struct-timespec.patch b/buildroot/package/openvmtools/0005-Use-configure-test-for-struct-timespec.patch
new file mode 100644
index 000000000..3386faec1
--- /dev/null
+++ b/buildroot/package/openvmtools/0005-Use-configure-test-for-struct-timespec.patch
@@ -0,0 +1,48 @@
+From bf1eafb07297711baf9320b1edcca8a3376f117d Mon Sep 17 00:00:00 2001
+From: Natanael Copa 
+Date: Wed, 18 Nov 2015 09:03:00 +0000
+Subject: [PATCH] Use configure test for struct timespec
+
+Use the configure script to test for struct time spec instead of trying
+to keep track of what platforms has it.
+
+Signed-off-by: Natanael Copa 
+[Retrieved from:
+http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-support/open-vm-tools/open-vm-tools/0005-Use-configure-test-for-struct-timespec.patch?h=sumo]
+Signed-off-by: Fabrice Fontaine 
+---
+ open-vm-tools/configure.ac           | 1 +
+ open-vm-tools/lib/include/hgfsUtil.h | 8 +-------
+ 2 files changed, 2 insertions(+), 7 deletions(-)
+
+Index: open-vm-tools/configure.ac
+===================================================================
+--- open-vm-tools.orig/configure.ac
++++ open-vm-tools/configure.ac
+@@ -1127,6 +1127,7 @@ AC_TYPE_OFF_T
+ AC_TYPE_PID_T
+ AC_TYPE_SIZE_T
+ AC_CHECK_MEMBERS([struct stat.st_rdev])
++AC_CHECK_MEMBERS([struct timespec.tv_sec],[],[],[[#include ]])
+ AC_HEADER_TIME
+ AC_STRUCT_TM
+ AC_C_VOLATILE
+Index: open-vm-tools/lib/include/hgfsUtil.h
+===================================================================
+--- open-vm-tools.orig/lib/include/hgfsUtil.h
++++ open-vm-tools/lib/include/hgfsUtil.h
+@@ -53,13 +53,7 @@
+ #      include 
+ #   endif
+ #   include "vm_basic_types.h"
+-#   if !defined _STRUCT_TIMESPEC &&   \
+-       !defined _TIMESPEC_DECLARED && \
+-       !defined __timespec_defined && \
+-       !defined sun && \
+-       !defined __FreeBSD__ && \
+-       !__APPLE__ && \
+-       !defined _WIN32
++#   if !defined HAVE_STRUCT_TIMESPEC_TV_SEC
+ struct timespec {
+    time_t tv_sec;
+    long   tv_nsec;
diff --git a/buildroot/package/openvmtools/0006-Fix-definition-of-ALLPERMS-and-ACCESSPERMS.patch b/buildroot/package/openvmtools/0006-Fix-definition-of-ALLPERMS-and-ACCESSPERMS.patch
new file mode 100644
index 000000000..371004c90
--- /dev/null
+++ b/buildroot/package/openvmtools/0006-Fix-definition-of-ALLPERMS-and-ACCESSPERMS.patch
@@ -0,0 +1,61 @@
+From 31ae6f42458f90d4994a4ad8e2b7673691612c36 Mon Sep 17 00:00:00 2001
+From: Natanael Copa 
+Date: Wed, 18 Nov 2015 09:10:14 +0000
+Subject: [PATCH] Fix definition of ALLPERMS and ACCESSPERMS
+
+The ALLPERMS and ACCESSPERMS defines are not specified in POSIX so
+assume it is not there instead of testing for specific implementations.
+
+This is needed for musl libc.
+
+Signed-off-by: Natanael Copa 
+[Retrieved from:
+http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-support/open-vm-tools/open-vm-tools/0006-Fix-definition-of-ALLPERMS-and-ACCESSPERMS.patch?h=sumo]
+Signed-off-by: Fabrice Fontaine 
+---
+ open-vm-tools/lib/hgfsServer/hgfsServerLinux.c      | 8 +++++---
+ open-vm-tools/services/plugins/dndcp/dnd/dndLinux.c | 3 +--
+ 2 files changed, 6 insertions(+), 5 deletions(-)
+
+Index: open-vm-tools/lib/hgfsServer/hgfsServerLinux.c
+===================================================================
+--- open-vm-tools.orig/lib/hgfsServer/hgfsServerLinux.c
++++ open-vm-tools/lib/hgfsServer/hgfsServerLinux.c
+@@ -107,11 +107,13 @@ typedef struct DirectoryEntry {
+ #endif
+ 
+ /*
+- * ALLPERMS (mode 07777) and ACCESSPERMS (mode 0777) are not defined in the
+- * Solaris version of .
++ * ALLPERMS (mode 07777) and ACCESSPERMS (mode 0777) are not specified in
++ * POSIX.
+  */
+-#ifdef sun
++#ifndef ACCESSPERMS
+ #   define ACCESSPERMS (S_IRWXU|S_IRWXG|S_IRWXO)
++#endif
++#ifndef ALLPERMS
+ #   define ALLPERMS (S_ISUID|S_ISGID|S_ISVTX|S_IRWXU|S_IRWXG|S_IRWXO)
+ #endif
+ 
+Index: open-vm-tools/services/plugins/dndcp/dnd/dndLinux.c
+===================================================================
+--- open-vm-tools.orig/services/plugins/dndcp/dnd/dndLinux.c
++++ open-vm-tools/services/plugins/dndcp/dnd/dndLinux.c
+@@ -51,7 +51,7 @@
+ 
+ #define DND_ROOTDIR_PERMS     (S_IRWXU | S_IRWXG | S_IRWXO)
+ #define DND_STAGINGDIR_PERMS  (S_IRWXU | S_IRGRP | S_IXGRP | S_IROTH | S_IXOTH)
+-#ifdef sun
++#ifndef ACCESSPERMS
+ #define ACCESSPERMS           (S_IRWXU | S_IRWXG | S_IRWXO)
+ #endif
+ #ifdef __ANDROID__
+@@ -60,7 +60,6 @@
+  */
+ #define NO_SETMNTENT
+ #define NO_ENDMNTENT
+-#define ACCESSPERMS           (S_IRWXU | S_IRWXG | S_IRWXO)
+ #endif
+ 
+ 
diff --git a/buildroot/package/openvmtools/0007-Use-configure-to-test-for-feature-instead-of-platfor.patch b/buildroot/package/openvmtools/0007-Use-configure-to-test-for-feature-instead-of-platfor.patch
new file mode 100644
index 000000000..0d3948aa1
--- /dev/null
+++ b/buildroot/package/openvmtools/0007-Use-configure-to-test-for-feature-instead-of-platfor.patch
@@ -0,0 +1,150 @@
+From 6cc1c22cc30320f56da552a76bd956db8f255b6a Mon Sep 17 00:00:00 2001
+From: Natanael Copa 
+Date: Wed, 18 Nov 2015 10:05:07 +0000
+Subject: [PATCH] Use configure to test for feature instead of platform
+
+Test for various functions instead of trying to keep track of what
+platform and what version of the given platform has support for what.
+
+This should make it easier to port to currently unknown platforms and
+will solve the issue if a platform add support for a missing feature in
+the future.
+
+The features we test for are:
+- getifaddrs
+- getauxval
+- issetugid
+- __secure_getenv
+
+This is needed for musl libc.
+
+Signed-off-by: Natanael Copa 
+[Retrieved (and slightly updated) from:
+http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-support/open-vm-tools/open-vm-tools/0007-Use-configure-to-test-for-feature-instead-of-platfor.patch?h=sumo]
+Signed-off-by: Fabrice Fontaine 
+---
+ open-vm-tools/configure.ac               |  4 ++++
+ open-vm-tools/lib/misc/idLinux.c         | 30 ++++++++++++++----------------
+ open-vm-tools/lib/nicInfo/nicInfoPosix.c |  8 ++++++--
+ 3 files changed, 24 insertions(+), 18 deletions(-)
+
+Index: open-vm-tools/configure.ac
+===================================================================
+--- open-vm-tools.orig/configure.ac
++++ open-vm-tools/configure.ac
+@@ -798,6 +798,7 @@ AC_CHECK_FUNCS(
+ 
+ AC_CHECK_FUNCS([ecvt])
+ AC_CHECK_FUNCS([fcvt])
++AC_CHECK_FUNCS([getifaddrs getauxval issetugid __secure_getenv])
+ 
+ AC_CHECK_FUNC([mkdtemp], [have_mkdtemp=yes])
+ 
+@@ -1063,10 +1064,13 @@ AC_PATH_PROG(
+ ###
+ 
+ AC_CHECK_HEADERS([crypt.h])
++AC_CHECK_HEADERS([ifaddrs.h])
+ AC_CHECK_HEADERS([inttypes.h])
+ AC_CHECK_HEADERS([stdint.h])
+ AC_CHECK_HEADERS([stdlib.h])
+ AC_CHECK_HEADERS([wchar.h])
++AC_CHECK_HEADERS([net/if.h])
++AC_CHECK_HEADERS([sys/auxv.h])
+ AC_CHECK_HEADERS([sys/inttypes.h])
+ AC_CHECK_HEADERS([sys/io.h])
+ AC_CHECK_HEADERS([sys/param.h]) # Required to make the sys/user.h check work correctly on FreeBSD
+Index: open-vm-tools/lib/misc/idLinux.c
+===================================================================
+--- open-vm-tools.orig/lib/misc/idLinux.c
++++ open-vm-tools/lib/misc/idLinux.c
+@@ -27,12 +27,9 @@
+ #include 
+ #include 
+ #include 
+-#ifdef __linux__
+-#if defined(__GLIBC__) && \
+-           (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 16))
++#ifdef HAVE_SYS_AUXV_H
+ #include 
+ #endif
+-#endif
+ #ifdef __APPLE__
+ #include 
+ #include 
+@@ -997,31 +994,32 @@ Id_EndSuperUser(uid_t uid)  // IN:
+ static Bool
+ IdIsSetUGid(void)
+ {
+-#if defined(__ANDROID__)
+-   /* Android does not have a secure_getenv, so be conservative. */
+-   return TRUE;
+-#else
+    /*
+     * We use __secure_getenv, which returns NULL if the binary is
+-    * setuid or setgid. Alternatives include,
++    * setuid or setgid, when issetugid or getauxval(AT_SECURE) is not
++    * available. Alternatives include,
+     *
+-    *   a) getauxval(AT_SECURE); not available until glibc 2.16.
+-    *   b) __libc_enable_secure; may not be exported.
++    *   a) issetugid(); not (yet?) available in glibc.
++    *   b) getauxval(AT_SECURE); not available until glibc 2.16.
++    *   c) __libc_enable_secure; may not be exported.
+     *
+-    * Use (a) when we are based on glibc 2.16, or newer.
++    * Use (b) when we are based on glibc 2.16, or newer.
+     */
+ 
+-#if defined(__GLIBC__) && \
+-           (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 16))
++#if HAVE_ISSETUGID
++   return issetugid();
++#elif HAVE_GETAUXVAL
+    return getauxval(AT_SECURE) != 0;
+-#else
++#elif HAVE___SECURE_GETENV
+    static const char envName[] = "VMW_SETUGID_TEST";
+ 
+    if (setenv(envName, "1", TRUE) == -1) {
+       return TRUE; /* Conservative */
+    }
+    return __secure_getenv(envName) == NULL;
+-#endif
++#else
++   /* Android does not have a secure_getenv, so be conservative. */
++   return TRUE;
+ #endif
+ }
+ #endif
+Index: open-vm-tools/lib/nicInfo/nicInfoPosix.c
+===================================================================
+--- open-vm-tools.orig/lib/nicInfo/nicInfoPosix.c
++++ open-vm-tools/lib/nicInfo/nicInfoPosix.c
+@@ -34,9 +34,13 @@
+ #include 
+ #include 
+ #include 
+-#if defined(__FreeBSD__) || defined(__APPLE__)
++#if HAVE_SYS_SYSCTL_H
+ # include 
++#endif
++#if HAVE_IFADDRS_H
+ # include 
++#endif
++#if HAVE_NET_IF_H
+ # include 
+ #endif
+ #ifndef NO_DNET
+@@ -348,10 +352,7 @@ GuestInfoGetNicInfo(NicInfoV3 *nicInfo)
+  *
+  ******************************************************************************
+  */
+-#if defined(__FreeBSD__) || \
+-    defined(__APPLE__) || \
+-    defined(USERWORLD) || \
+-    (defined(__linux__) && defined(NO_DNET))
++#if defined(NO_DNET) && defined(HAVE_GETIFADDRS)
+ 
+ char *
+ GuestInfoGetPrimaryIP(void)
diff --git a/buildroot/package/openvmtools/0008-Use-configure-test-for-sys-stat.h-include.patch b/buildroot/package/openvmtools/0008-Use-configure-test-for-sys-stat.h-include.patch
new file mode 100644
index 000000000..c058dfe6c
--- /dev/null
+++ b/buildroot/package/openvmtools/0008-Use-configure-test-for-sys-stat.h-include.patch
@@ -0,0 +1,28 @@
+From 95c6184d9ff70a47c41768850923a96de9e544aa Mon Sep 17 00:00:00 2001
+From: Natanael Copa 
+Date: Wed, 18 Nov 2015 10:41:01 +0000
+Subject: [PATCH] Use configure test for sys/stat.h include
+
+This is needed for musl libc.
+
+Signed-off-by: Natanael Copa 
+[Retrieved from:
+http://cgit.openembedded.org/meta-openembedded/tree/meta-oe/recipes-support/open-vm-tools/open-vm-tools/0011-Use-configure-test-for-sys-stat.h-include.patch?h=sumo]
+Signed-off-by: Fabrice Fontaine 
+---
+ open-vm-tools/services/plugins/vix/vixTools.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: open-vm-tools/services/plugins/vix/vixTools.c
+===================================================================
+--- open-vm-tools.orig/services/plugins/vix/vixTools.c
++++ open-vm-tools/services/plugins/vix/vixTools.c
+@@ -66,7 +66,7 @@
+ #include 
+ #endif
+ 
+-#if defined(sun) || defined(__FreeBSD__) || defined(__APPLE__)
++#ifdef HAVE_SYS_STAT_H
+ #include 
+ #endif
+ 
diff --git a/buildroot/package/openvmtools/0009-Set-permissions-on-rules-file.patch b/buildroot/package/openvmtools/0009-Set-permissions-on-rules-file.patch
new file mode 100644
index 000000000..6a37c1690
--- /dev/null
+++ b/buildroot/package/openvmtools/0009-Set-permissions-on-rules-file.patch
@@ -0,0 +1,23 @@
+From c3ef6a8285132871ad10f9300d8afff55d8d6de2 Mon Sep 17 00:00:00 2001
+From: puneetse <22071208+puneetse@users.noreply.github.com>
+Date: Wed, 16 Oct 2019 10:09:38 -0700
+Subject: [PATCH] Set permissions on rules file
+
+udevs rules should not be executable otherwise udev will log a warning in the journal
+
+Signed-off-by: Pascal de Bruijn 
+---
+ udev/Makefile.am | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/udev/Makefile.am b/udev/Makefile.am
+index 68fbc3e27..8b9a4d716 100644
+--- a/udev/Makefile.am
++++ b/udev/Makefile.am
+@@ -17,5 +17,5 @@
+ 
+ install-data-local:
+ 	$(INSTALL) -d $(DESTDIR)$(UDEVRULESDIR)
+-	$(INSTALL) $(srcdir)/99-vmware-scsi-udev.rules $(DESTDIR)$(UDEVRULESDIR)
++	$(INSTALL) -m 0644 $(srcdir)/99-vmware-scsi-udev.rules $(DESTDIR)$(UDEVRULESDIR)
+ 
diff --git a/buildroot/package/openvmtools/0010-Change-DEVPATH-to-devpath.patch b/buildroot/package/openvmtools/0010-Change-DEVPATH-to-devpath.patch
new file mode 100644
index 000000000..5af694d8f
--- /dev/null
+++ b/buildroot/package/openvmtools/0010-Change-DEVPATH-to-devpath.patch
@@ -0,0 +1,25 @@
+From 22f5d198b3b2f7e4debed83948ba1baf70d4749a Mon Sep 17 00:00:00 2001
+From: puneetse <22071208+puneetse@users.noreply.github.com>
+Date: Wed, 16 Oct 2019 10:04:41 -0700
+Subject: [PATCH] Change $DEVPATH to $devpath
+
+$DEVPATH throws a warning by udev.
+
+Signed-off-by: Pascal de Bruijn 
+---
+ udev/99-vmware-scsi-udev.rules | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/udev/99-vmware-scsi-udev.rules b/udev/99-vmware-scsi-udev.rules
+index 053b59706..a605d80ef 100644
+--- a/udev/99-vmware-scsi-udev.rules
++++ b/udev/99-vmware-scsi-udev.rules
+@@ -2,6 +2,6 @@
+ #
+ # This file is part of open-vm-tools
+ 
+-ACTION=="add", SUBSYSTEMS=="scsi", ATTRS{vendor}=="VMware*", ATTRS{model}=="Virtual disk*", ENV{DEVTYPE}=="disk", RUN+="/bin/sh -c 'echo 180 >/sys$DEVPATH/device/timeout'"
+-ACTION=="add", SUBSYSTEMS=="scsi", ATTRS{vendor}=="VMware*", ATTRS{model}=="VMware Virtual S", ENV{DEVTYPE}=="disk", RUN+="/bin/sh -c 'echo 180 >/sys$DEVPATH/device/timeout'"
++ACTION=="add", SUBSYSTEMS=="scsi", ATTRS{vendor}=="VMware*", ATTRS{model}=="Virtual disk*", ENV{DEVTYPE}=="disk", RUN+="/bin/sh -c 'echo 180 >/sys/$devpath/device/timeout'"
++ACTION=="add", SUBSYSTEMS=="scsi", ATTRS{vendor}=="VMware*", ATTRS{model}=="VMware Virtual S", ENV{DEVTYPE}=="disk", RUN+="/bin/sh -c 'echo 180 >/sys/$devpath/device/timeout'"
+ 
diff --git a/buildroot/package/openvmtools/Config.in b/buildroot/package/openvmtools/Config.in
index 72c0293de..49d718953 100644
--- a/buildroot/package/openvmtools/Config.in
+++ b/buildroot/package/openvmtools/Config.in
@@ -4,11 +4,11 @@ config BR2_PACKAGE_OPENVMTOOLS
 	depends on BR2_USE_MMU # libglib2
 	depends on BR2_USE_WCHAR # libglib2
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
-	depends on BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	depends on BR2_ENABLE_LOCALE
 	depends on !BR2_TOOLCHAIN_USES_UCLIBC
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_LIBDNET
+	select BR2_PACKAGE_LIBTIRPC if !BR2_TOOLCHAIN_HAS_NATIVE_RPC
 	help
 	  Open Virtual Machine Tools for VMware guest OS
 
@@ -47,9 +47,9 @@ comment "PAM support needs a glibc toolchain w/ dynamic library"
 
 endif
 
-comment "openvmtools needs a glibc or musl toolchain w/ wchar, threads, RPC, locale"
+comment "openvmtools needs a glibc or musl toolchain w/ wchar, threads, locale"
 	depends on BR2_i386 || BR2_x86_64
 	depends on BR2_USE_MMU
 	depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || \
-		!BR2_TOOLCHAIN_HAS_NATIVE_RPC || !BR2_ENABLE_LOCALE || \
+		!BR2_ENABLE_LOCALE || \
 		BR2_TOOLCHAIN_USES_UCLIBC
diff --git a/buildroot/package/openvmtools/S10vmtoolsd b/buildroot/package/openvmtools/S10vmtoolsd
index 6afb9ca08..5fdb5682f 100644
--- a/buildroot/package/openvmtools/S10vmtoolsd
+++ b/buildroot/package/openvmtools/S10vmtoolsd
@@ -7,6 +7,8 @@ EXEC="/usr/bin/vmtoolsd"
 ARGS="-b"
 PID="/var/run/vmtoolsd.pid"
 
+[ -r /etc/default/vmtoolsd ] && . /etc/default/vmtoolsd
+
 case "$1" in
   start)
     printf "Starting vmtoolsd: "
diff --git a/buildroot/package/openvmtools/openvmtools.mk b/buildroot/package/openvmtools/openvmtools.mk
index 0dc2956d0..c5e306221 100644
--- a/buildroot/package/openvmtools/openvmtools.mk
+++ b/buildroot/package/openvmtools/openvmtools.mk
@@ -20,6 +20,10 @@ OPENVMTOOLS_CONF_OPTS = --with-dnet \
 OPENVMTOOLS_CONF_ENV += CUSTOM_DNET_CPPFLAGS=" "
 OPENVMTOOLS_DEPENDENCIES = host-nfs-utils libglib2 libdnet
 
+ifeq ($(BR2_PACKAGE_LIBTIRPC),y)
+OPENVMTOOLS_DEPENDENCIES += libtirpc
+endif
+
 # When libfuse is available, openvmtools can build vmblock-fuse, so
 # make sure that libfuse gets built first
 ifeq ($(BR2_PACKAGE_LIBFUSE),y)
diff --git a/buildroot/package/openvmtools/vmtoolsd.service b/buildroot/package/openvmtools/vmtoolsd.service
index 1d2a3566c..cb97357ec 100644
--- a/buildroot/package/openvmtools/vmtoolsd.service
+++ b/buildroot/package/openvmtools/vmtoolsd.service
@@ -5,8 +5,8 @@ ConditionVirtualization=vmware
 
 [Service]
 Type=forking
-PIDFile=/run/vmtoolsd.pid
-ExecStart=/usr/bin/vmtoolsd -b /run/vmtoolsd.pid
+PIDFile=/var/run/vmtoolsd.pid
+ExecStart=/usr/bin/vmtoolsd -b /var/run/vmtoolsd.pid
 Restart=on-failure
 KillMode=process
 KillSignal=SIGKILL
diff --git a/buildroot/package/opkg/Config.in b/buildroot/package/opkg/Config.in
index 20f6fa2f5..1f6a39343 100644
--- a/buildroot/package/opkg/Config.in
+++ b/buildroot/package/opkg/Config.in
@@ -17,7 +17,7 @@ config BR2_PACKAGE_OPKG
 	  conforms to a subset of debian's policy manual regarding
 	  control files.
 
-	  http://code.google.com/p/opkg/
+	  https://code.google.com/archive/p/opkg/
 
 if BR2_PACKAGE_OPKG
 
diff --git a/buildroot/package/oprofile/Config.in b/buildroot/package/oprofile/Config.in
index d99a7e60c..cce2cfdab 100644
--- a/buildroot/package/oprofile/Config.in
+++ b/buildroot/package/oprofile/Config.in
@@ -39,6 +39,8 @@ config BR2_PACKAGE_OPROFILE
 	  interrupt handlers, kernel modules, the kernel, shared
 	  libraries, and applications.
 
+	  https://sourceforge.net/projects/oprofile/
+
 comment "oprofile needs a toolchain w/ C++, wchar"
 	depends on BR2_USE_MMU
 	depends on BR2_PACKAGE_OPROFILE_ARCH_SUPPORTS
diff --git a/buildroot/package/oracle-mysql/oracle-mysql.mk b/buildroot/package/oracle-mysql/oracle-mysql.mk
index 0275a8428..326fbcc04 100644
--- a/buildroot/package/oracle-mysql/oracle-mysql.mk
+++ b/buildroot/package/oracle-mysql/oracle-mysql.mk
@@ -9,7 +9,7 @@ ORACLE_MYSQL_VERSION = $(ORACLE_MYSQL_VERSION_MAJOR).73
 ORACLE_MYSQL_SOURCE = mysql-$(ORACLE_MYSQL_VERSION).tar.gz
 ORACLE_MYSQL_SITE = http://dev.mysql.com/get/Downloads/MySQL-$(ORACLE_MYSQL_VERSION_MAJOR)
 ORACLE_MYSQL_INSTALL_STAGING = YES
-ORACLE_MYSQL_DEPENDENCIES = readline ncurses
+ORACLE_MYSQL_DEPENDENCIES = ncurses
 ORACLE_MYSQL_AUTORECONF = YES
 ORACLE_MYSQL_LICENSE = GPL-2.0
 ORACLE_MYSQL_LICENSE_FILES = README COPYING
@@ -33,7 +33,7 @@ ORACLE_MYSQL_CONF_OPTS = \
 	--without-docs \
 	--without-man \
 	--without-libedit \
-	--without-readline \
+	--with-readline \
 	--with-low-memory \
 	--enable-thread-safe-client \
 	--with-unix-socket-path=$(MYSQL_SOCKET) \
diff --git a/buildroot/package/ortp/Config.in b/buildroot/package/ortp/Config.in
index 788eaf4bb..052ff1d39 100644
--- a/buildroot/package/ortp/Config.in
+++ b/buildroot/package/ortp/Config.in
@@ -6,7 +6,7 @@ config BR2_PACKAGE_ORTP
 	help
 	  oRTP, a Real-time Transport Protocol (RTP,RFC3550) library
 
-	  http://www.linphone.org/eng/documentation/dev/ortp.html
+	  https://www.linphone.org/technical-corner/ortp
 
 comment "ortp needs a toolchain w/ C++, threads"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/buildroot/package/pcmanfm/pcmanfm.mk b/buildroot/package/pcmanfm/pcmanfm.mk
index 6dadfaeeb..5d8730984 100644
--- a/buildroot/package/pcmanfm/pcmanfm.mk
+++ b/buildroot/package/pcmanfm/pcmanfm.mk
@@ -7,9 +7,10 @@
 PCMANFM_VERSION = 1.3.0
 PCMANFM_SOURCE = pcmanfm-$(PCMANFM_VERSION).tar.xz
 PCMANFM_SITE = http://sourceforge.net/projects/pcmanfm/files
-PCMANFM_DEPENDENCIES = libglib2 menu-cache libfm
+PCMANFM_DEPENDENCIES = libglib2 menu-cache libfm $(TARGET_NLS_DEPENDENCIES)
 PCMANFM_LICENSE = GPL-2.0+
 PCMANFM_LICENSE_FILES = COPYING
+PCMANFM_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 
 ifeq ($(BR2_PACKAGE_LIBGTK3_X11),y)
 PCMANFM_CONF_OPTS += --with-gtk=3
diff --git a/buildroot/package/perl-gdgraph/perl-gdgraph.hash b/buildroot/package/perl-gdgraph/perl-gdgraph.hash
index ea994519d..c0b195eb2 100644
--- a/buildroot/package/perl-gdgraph/perl-gdgraph.hash
+++ b/buildroot/package/perl-gdgraph/perl-gdgraph.hash
@@ -2,5 +2,6 @@
 md5    38c6a188519e6272e9b2b722b315c3d8 GDGraph-1.54.tar.gz
 sha256 b96f5c10b656c17d16ab65a1777c908297b028d3b6815f6d54b2337f006bfa4f GDGraph-1.54.tar.gz
 
-# computed by scancpan
+# Hash for license files
 sha256 710484e3a1196664bbe8a5ad5d53c528e01226eb20e2885a4e1131eb6c6565cd Dustismo.LICENSE
+sha256 f44630ad9101e40a101d906a07908c975a9b0742273cfb0c00a51d73afb53e7d README
diff --git a/buildroot/package/perl-gdgraph/perl-gdgraph.mk b/buildroot/package/perl-gdgraph/perl-gdgraph.mk
index 284dc9dc2..286902a66 100644
--- a/buildroot/package/perl-gdgraph/perl-gdgraph.mk
+++ b/buildroot/package/perl-gdgraph/perl-gdgraph.mk
@@ -7,8 +7,8 @@
 PERL_GDGRAPH_VERSION = 1.54
 PERL_GDGRAPH_SOURCE = GDGraph-$(PERL_GDGRAPH_VERSION).tar.gz
 PERL_GDGRAPH_SITE = $(BR2_CPAN_MIRROR)/authors/id/R/RU/RUZ
-PERL_GDGRAPH_LICENSE = Artistic or GPL-1.0+
-PERL_GDGRAPH_LICENSE_FILES = Dustismo.LICENSE
+PERL_GDGRAPH_LICENSE = Artistic or GPL-1.0+ (perl module), GPL-2.0+ (font)
+PERL_GDGRAPH_LICENSE_FILES = Dustismo.LICENSE README
 PERL_GDGRAPH_DISTNAME = GDGraph
 
 $(eval $(perl-package))
diff --git a/buildroot/package/perl-gdtextutil/perl-gdtextutil.hash b/buildroot/package/perl-gdtextutil/perl-gdtextutil.hash
index f0e947f63..add0717f1 100644
--- a/buildroot/package/perl-gdtextutil/perl-gdtextutil.hash
+++ b/buildroot/package/perl-gdtextutil/perl-gdtextutil.hash
@@ -2,5 +2,6 @@
 md5    941ad06eadc86b47f3a32da405665c41 GDTextUtil-0.86.tar.gz
 sha256 886ecbf85cfe94f4135ee5689c4847a9ae783ecb99e6759e12c734f2dd6116bc GDTextUtil-0.86.tar.gz
 
-# computed by scancpan
+# Hash for license files
 sha256 710484e3a1196664bbe8a5ad5d53c528e01226eb20e2885a4e1131eb6c6565cd Dustismo.LICENSE
+sha256 93ca7dd7f372c79e8ec1f849f2a418a67d195e4027c1b3e3dd8444fb30f3e97c README
diff --git a/buildroot/package/perl-gdtextutil/perl-gdtextutil.mk b/buildroot/package/perl-gdtextutil/perl-gdtextutil.mk
index cd1617fbb..f91d9e9eb 100644
--- a/buildroot/package/perl-gdtextutil/perl-gdtextutil.mk
+++ b/buildroot/package/perl-gdtextutil/perl-gdtextutil.mk
@@ -7,7 +7,8 @@
 PERL_GDTEXTUTIL_VERSION = 0.86
 PERL_GDTEXTUTIL_SOURCE = GDTextUtil-$(PERL_GDTEXTUTIL_VERSION).tar.gz
 PERL_GDTEXTUTIL_SITE = $(BR2_CPAN_MIRROR)/authors/id/M/MV/MVERB
-PERL_GDTEXTUTIL_LICENSE_FILES = Dustismo.LICENSE
+PERL_GDTEXTUTIL_LICENSE = Artistic or GPL-1.0+ (perl module), GPL-2.0+ (font)
+PERL_GDTEXTUTIL_LICENSE_FILES = Dustismo.LICENSE README
 PERL_GDTEXTUTIL_DISTNAME = GDTextUtil
 
 $(eval $(perl-package))
diff --git a/buildroot/package/perl-sys-cpu/Config.in b/buildroot/package/perl-sys-cpu/Config.in
index 8306b371d..70cfded8f 100644
--- a/buildroot/package/perl-sys-cpu/Config.in
+++ b/buildroot/package/perl-sys-cpu/Config.in
@@ -5,5 +5,7 @@ config BR2_PACKAGE_PERL_SYS_CPU
 	  Perl module for getting information about the system CPU
 	  (Sys::CPU).
 
+	  http://search.cpan.org/dist/Sys-CPU/
+
 comment "perl-sys-cpu needs a toolchain w/ dynamic library"
 	depends on BR2_STATIC_LIBS
diff --git a/buildroot/package/php/php.hash b/buildroot/package/php/php.hash
index d88433e8c..11ce10959 100644
--- a/buildroot/package/php/php.hash
+++ b/buildroot/package/php/php.hash
@@ -1,5 +1,5 @@
 # From http://php.net/downloads.php
-sha256 fefc8967daa30ebc375b2ab2857f97da94ca81921b722ddac86b29e15c54a164  php-7.3.6.tar.xz
+sha256 aafe5e9861ad828860c6af8c88cdc1488314785962328eb1783607c1fdd855df  php-7.3.12.tar.xz
 
 # License file
 sha256 f689b8fa63bea7950ce6a21bf52ed88ea0d77673ee76e6de12f51191174d91b8  LICENSE
diff --git a/buildroot/package/php/php.mk b/buildroot/package/php/php.mk
index 7132f9591..dae1fade2 100644
--- a/buildroot/package/php/php.mk
+++ b/buildroot/package/php/php.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-PHP_VERSION = 7.3.6
+PHP_VERSION = 7.3.12
 PHP_SITE = http://www.php.net/distributions
 PHP_SOURCE = php-$(PHP_VERSION).tar.xz
 PHP_INSTALL_STAGING = YES
diff --git a/buildroot/package/pigpio/pigpio.mk b/buildroot/package/pigpio/pigpio.mk
index 3071036db..461ca0440 100644
--- a/buildroot/package/pigpio/pigpio.mk
+++ b/buildroot/package/pigpio/pigpio.mk
@@ -8,6 +8,7 @@ PIGPIO_VERSION = V68
 PIGPIO_SITE = $(call github,joan2937,pigpio,$(PIGPIO_VERSION))
 PIGPIO_LICENSE = Unlicense
 PIGPIO_LICENSE_FILES = UNLICENCE
+PIGPIO_INSTALL_STAGING = YES
 
 define PIGPIO_BUILD_CMDS
 	$(TARGET_MAKE_ENV) $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D)
@@ -22,4 +23,13 @@ define PIGPIO_INSTALL_TARGET_CMDS
 	$(INSTALL) -D -m 0755 $(@D)/libpigpiod_if2.so $(TARGET_DIR)/usr/lib/libpigpiod_if2.so
 endef
 
+define PIGPIO_INSTALL_STAGING_CMDS
+	$(INSTALL) -D -m 0755 $(@D)/libpigpio.so $(STAGING_DIR)/usr/lib/libpigpio.so
+	$(INSTALL) -D -m 0755 $(@D)/libpigpiod_if.so $(STAGING_DIR)/usr/lib/libpigpiod_if.so
+	$(INSTALL) -D -m 0755 $(@D)/libpigpiod_if2.so $(STAGING_DIR)/usr/lib/libpigpiod_if2.so
+	$(INSTALL) -D -m 0644 $(@D)/pigpio.h $(STAGING_DIR)/usr/include/pigpio.h
+	$(INSTALL) -D -m 0644 $(@D)/pigpiod_if.h $(STAGING_DIR)/usr/include/pigpiod_if.h
+	$(INSTALL) -D -m 0644 $(@D)/pigpiod_if2.h $(STAGING_DIR)/usr/include/pigpiod_if2.h
+endef
+
 $(eval $(generic-package))
diff --git a/buildroot/package/pimd/Config.in b/buildroot/package/pimd/Config.in
index d6a579bda..718f84f4f 100644
--- a/buildroot/package/pimd/Config.in
+++ b/buildroot/package/pimd/Config.in
@@ -5,4 +5,4 @@ config BR2_PACKAGE_PIMD
 	  pimd is a lightweight stand-alone PIM-SM v2 multicast routing
 	  daemon.
 
-	  http://troglobit.com/project/pimd/
+	  http://troglobit.com/projects/pimd/
diff --git a/buildroot/package/pkg-generic.mk b/buildroot/package/pkg-generic.mk
index cbe885aaa..1ac7f7877 100644
--- a/buildroot/package/pkg-generic.mk
+++ b/buildroot/package/pkg-generic.mk
@@ -184,7 +184,7 @@ $(BUILD_DIR)/%/.stamp_rsynced:
 	@mkdir -p $(@D)
 	$(foreach hook,$($(PKG)_PRE_RSYNC_HOOKS),$(call $(hook))$(sep))
 	@test -d $(SRCDIR) || (echo "ERROR: $(SRCDIR) does not exist" ; exit 1)
-	rsync -au --chmod=u=rwX,go=rX $(RSYNC_VCS_EXCLUSIONS) $($(PKG)_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS) $(call qstrip,$(SRCDIR))/ $(@D)
+	rsync -au --chmod=u=rwX,go=rX $($(PKG)_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS) $(RSYNC_VCS_EXCLUSIONS) $(call qstrip,$(SRCDIR))/ $(@D)
 	$(foreach hook,$($(PKG)_POST_RSYNC_HOOKS),$(call $(hook))$(sep))
 	@$(call step_end,rsync)
 	$(Q)touch $@
@@ -521,7 +521,7 @@ $(2)_ALL_DOWNLOADS = \
 	$$(if $$($(2)_SOURCE),$$($(2)_SITE_METHOD)+$$($(2)_SITE)/$$($(2)_SOURCE)) \
 	$$(foreach p,$$($(2)_PATCH) $$($(2)_EXTRA_DOWNLOADS),\
 		$$(if $$(findstring ://,$$(p)),$$(p),\
-			$$($(2)_SITE)/$$(p)))
+			$$($(2)_SITE_METHOD)+$$($(2)_SITE)/$$(p)))
 
 ifndef $(2)_SITE
  ifdef $(3)_SITE
@@ -538,6 +538,12 @@ ifndef $(2)_SITE_METHOD
  endif
 endif
 
+ifndef $(2)_DL_OPTS
+ ifdef $(3)_DL_OPTS
+  $(2)_DL_OPTS = $$($(3)_DL_OPTS)
+ endif
+endif
+
 ifneq ($$(filter bzr cvs hg svn,$$($(2)_SITE_METHOD)),)
 BR_NO_CHECK_HASH_FOR += $$($(2)_SOURCE)
 endif
@@ -1037,6 +1043,7 @@ PACKAGES_USERS += $$($(2)_USERS)$$(sep)
 endif
 TARGET_FINALIZE_HOOKS += $$($(2)_TARGET_FINALIZE_HOOKS)
 ROOTFS_PRE_CMD_HOOKS += $$($(2)_ROOTFS_PRE_CMD_HOOKS)
+KEEP_PYTHON_PY_FILES += $$($(2)_KEEP_PY_FILES)
 
 ifeq ($$($(2)_SITE_METHOD),svn)
 DL_TOOLS_DEPENDENCIES += svn
diff --git a/buildroot/package/pkg-kconfig.mk b/buildroot/package/pkg-kconfig.mk
index d62be0fd0..a79578135 100644
--- a/buildroot/package/pkg-kconfig.mk
+++ b/buildroot/package/pkg-kconfig.mk
@@ -159,7 +159,7 @@ $$($(2)_TARGET_CONFIGURE): $$($(2)_DIR)/.stamp_kconfig_fixup_done
 $(1)-clean-for-reconfigure: $(1)-clean-kconfig-for-reconfigure
 
 $(1)-clean-kconfig-for-reconfigure:
-	rm -f $$($(2)_DIR)/.stamp_kconfig_fixup_done
+	rm -f $$($(2)_DIR)/$$($(2)_KCONFIG_STAMP_DOTCONFIG)
 
 # Only enable the foo-*config targets when the package is actually enabled.
 # Note: the variable $(2)_KCONFIG_VAR is not related to the kconfig
diff --git a/buildroot/package/pkg-python.mk b/buildroot/package/pkg-python.mk
index e90692041..cf6464989 100644
--- a/buildroot/package/pkg-python.mk
+++ b/buildroot/package/pkg-python.mk
@@ -27,9 +27,7 @@ endef
 # Target distutils-based packages
 PKG_PYTHON_DISTUTILS_ENV = \
 	PATH=$(BR_PATH) \
-	CC="$(TARGET_CC)" \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
+	$(TARGET_CONFIGURE_OPTS) \
 	LDSHARED="$(TARGET_CROSS)gcc -shared" \
 	PYTHONPATH="$(if $(BR2_PACKAGE_PYTHON3),$(PYTHON3_PATH),$(PYTHON_PATH))" \
 	PYTHONNOUSERSITE=1 \
@@ -52,7 +50,8 @@ PKG_PYTHON_DISTUTILS_INSTALL_STAGING_OPTS = \
 # Host distutils-based packages
 HOST_PKG_PYTHON_DISTUTILS_ENV = \
 	PATH=$(BR_PATH) \
-	PYTHONNOUSERSITE=1
+	PYTHONNOUSERSITE=1 \
+	$(HOST_CONFIGURE_OPTS)
 
 HOST_PKG_PYTHON_DISTUTILS_INSTALL_OPTS = \
 	--prefix=$(HOST_DIR)
@@ -61,6 +60,7 @@ HOST_PKG_PYTHON_DISTUTILS_INSTALL_OPTS = \
 PKG_PYTHON_SETUPTOOLS_ENV = \
 	_PYTHON_SYSCONFIGDATA_NAME="$(PKG_PYTHON_SYSCONFIGDATA_NAME)" \
 	PATH=$(BR_PATH) \
+	$(TARGET_CONFIGURE_OPTS) \
 	PYTHONPATH="$(if $(BR2_PACKAGE_PYTHON3),$(PYTHON3_PATH),$(PYTHON_PATH))" \
 	PYTHONNOUSERSITE=1 \
 	_python_sysroot=$(STAGING_DIR) \
@@ -82,7 +82,8 @@ PKG_PYTHON_SETUPTOOLS_INSTALL_STAGING_OPTS = \
 # Host setuptools-based packages
 HOST_PKG_PYTHON_SETUPTOOLS_ENV = \
 	PATH=$(BR_PATH) \
-	PYTHONNOUSERSITE=1
+	PYTHONNOUSERSITE=1 \
+	$(HOST_CONFIGURE_OPTS)
 
 HOST_PKG_PYTHON_SETUPTOOLS_INSTALL_OPTS = \
 	--prefix=$(HOST_DIR) \
diff --git a/buildroot/package/postgresql/Config.in b/buildroot/package/postgresql/Config.in
index e548d3cb2..2f677daf5 100644
--- a/buildroot/package/postgresql/Config.in
+++ b/buildroot/package/postgresql/Config.in
@@ -11,7 +11,7 @@ config BR2_PACKAGE_POSTGRESQL
 	  database system.
 
 	  Enable the readline package to gain readline support in
-	  pgsql (the command line interpreter), which offers
+	  psql (the command line interpreter), which offers
 	  command history and edit functions.
 
 	  Enable the zlib package to gain builtin compression for
diff --git a/buildroot/package/postgresql/postgresql.hash b/buildroot/package/postgresql/postgresql.hash
index ba6e02d4d..4c78ad68b 100644
--- a/buildroot/package/postgresql/postgresql.hash
+++ b/buildroot/package/postgresql/postgresql.hash
@@ -1,7 +1,7 @@
-# From https://ftp.postgresql.org/pub/source/v11.3/postgresql-11.3.tar.bz2.md5
-md5 c2a729b754b8de86a969c86ec25db076  postgresql-11.3.tar.bz2
-# From https://ftp.postgresql.org/pub/source/v11.3/postgresql-11.3.tar.bz2.sha256
-sha256 2a85e082fc225944821dfd23990e32dfcd2284c19060864b0ad4ca537d30522d  postgresql-11.3.tar.bz2
+# From https://ftp.postgresql.org/pub/source/v11.6/postgresql-11.6.tar.bz2.md5
+md5 8e3462b342caf6f2265126674dde26da  postgresql-11.6.tar.bz2
+# From https://ftp.postgresql.org/pub/source/v11.6/postgresql-11.6.tar.bz2.sha256
+sha256 49924f7ff92965fdb20c86e0696f2dc9f8553e1563124ead7beedf8910c13170  postgresql-11.6.tar.bz2
 
 # License file, Locally calculated
 sha256	c4c86d683970b22b9fab53320ee1b3a30ef4e8223122b4fb6be53ea62ecee8b3  COPYRIGHT
diff --git a/buildroot/package/postgresql/postgresql.mk b/buildroot/package/postgresql/postgresql.mk
index e6e34f5c7..4209cde34 100644
--- a/buildroot/package/postgresql/postgresql.mk
+++ b/buildroot/package/postgresql/postgresql.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-POSTGRESQL_VERSION = 11.3
+POSTGRESQL_VERSION = 11.6
 POSTGRESQL_SOURCE = postgresql-$(POSTGRESQL_VERSION).tar.bz2
-POSTGRESQL_SITE = http://ftp.postgresql.org/pub/source/v$(POSTGRESQL_VERSION)
+POSTGRESQL_SITE = https://ftp.postgresql.org/pub/source/v$(POSTGRESQL_VERSION)
 POSTGRESQL_LICENSE = PostgreSQL
 POSTGRESQL_LICENSE_FILES = COPYRIGHT
 POSTGRESQL_INSTALL_STAGING = YES
diff --git a/buildroot/package/prboom/0002-configure-remove-predefined-O2-optimization-flag.patch b/buildroot/package/prboom/0002-configure-remove-predefined-O2-optimization-flag.patch
new file mode 100644
index 000000000..9260cb631
--- /dev/null
+++ b/buildroot/package/prboom/0002-configure-remove-predefined-O2-optimization-flag.patch
@@ -0,0 +1,21 @@
+configure: remove predefined -O2 optimization flag
+
+CFLAGS_OPT variable forces to use -O2 optimization flag denying the
+possibility to use different optimization flag values.
+
+Remove -O2 flag from CFLAGS_OPT.
+
+Signed-off-by: Giulio Benetti 
+---
+diff -urpN prboom-2.5.0.orig/configure.ac prboom-2.5.0/configure.ac
+--- prboom-2.5.0.orig/configure.ac	2019-06-20 14:07:45.058481879 +0200
++++ prboom-2.5.0/configure.ac	2019-06-20 14:09:05.066238825 +0200
+@@ -48,7 +48,7 @@ else
+ fi
+ 
+ dnl --- cph: work out flags to pass to compiler
+-CFLAGS_OPT="-O2 -fomit-frame-pointer"
++CFLAGS_OPT="-fomit-frame-pointer"
+ AC_C_COMPILE_FLAGS(-Wall)
+ dnl --- Option to enable debugging
+ AC_ARG_ENABLE(debug,AC_HELP_STRING([--enable-debug],[turns on various debugging features, like range checking and internal heap diagnostics]),,enable_debug="no")
diff --git a/buildroot/package/prboom/prboom.mk b/buildroot/package/prboom/prboom.mk
index d370ae3fa..36692d29a 100644
--- a/buildroot/package/prboom/prboom.mk
+++ b/buildroot/package/prboom/prboom.mk
@@ -10,6 +10,15 @@ PRBOOM_CONF_ENV = ac_cv_type_uid_t=yes
 PRBOOM_DEPENDENCIES = sdl sdl_net sdl_mixer
 PRBOOM_LICENSE = GPL-2.0+
 PRBOOM_LICENSE_FILES = COPYING
+PRBOOM_AUTORECONF = YES
+
+PRBOOM_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+PRBOOM_CFLAGS += -O0
+endif
+
+PRBOOM_CONF_ENV += CFLAGS="$(PRBOOM_CFLAGS)"
 
 ifeq ($(BR2_PACKAGE_LIBPNG),y)
 PRBOOM_DEPENDENCIES += libpng
diff --git a/buildroot/package/proftpd/0002-fix-CVE-2019-12815.patch b/buildroot/package/proftpd/0002-fix-CVE-2019-12815.patch
new file mode 100644
index 000000000..8b56d0886
--- /dev/null
+++ b/buildroot/package/proftpd/0002-fix-CVE-2019-12815.patch
@@ -0,0 +1,382 @@
+From 71cd49ea82313f78d52a52d0c628a3770dc96608 Mon Sep 17 00:00:00 2001
+From: TJ Saunders 
+Date: Wed, 17 Jul 2019 09:25:31 -0700
+Subject: [PATCH] Bug #4372: Ensure that mod_copy checks for  for its
+ SITE CPFR/CPTO commands.
+
+https://tbspace.de/cve201912815proftpd.html
+
+Downloaded from upstream commit
+https://github.com/proftpd/proftpd/commit/d19dd64161936d70c0a1544bd2c8e90850f4b7ae
+
+Signed-off-by: Bernd Kuhls 
+---
+ contrib/mod_copy.c                            |  36 ++-
+ tests/t/lib/ProFTPD/Tests/Modules/mod_copy.pm | 253 +++++++++++++++++-
+ 2 files changed, 285 insertions(+), 4 deletions(-)
+
+diff --git a/contrib/mod_copy.c b/contrib/mod_copy.c
+index 26b72a91d..c8672c40d 100644
+--- a/contrib/mod_copy.c
++++ b/contrib/mod_copy.c
+@@ -1,7 +1,7 @@
+ /*
+  * ProFTPD: mod_copy -- a module supporting copying of files on the server
+  *                      without transferring the data to the client and back
+- * Copyright (c) 2009-2016 TJ Saunders
++ * Copyright (c) 2009-2019 TJ Saunders
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+@@ -657,7 +657,7 @@ MODRET copy_copy(cmd_rec *cmd) {
+ MODRET copy_cpfr(cmd_rec *cmd) {
+   register unsigned int i;
+   int res;
+-  char *path = "";
++  char *cmd_name, *path = "";
+   unsigned char *authenticated = NULL;
+ 
+   if (copy_engine == FALSE) {
+@@ -705,6 +705,21 @@ MODRET copy_cpfr(cmd_rec *cmd) {
+     path = pstrcat(cmd->tmp_pool, path, *path ? " " : "", decoded_path, NULL);
+   }
+ 
++  cmd_name = cmd->argv[0];
++  pr_cmd_set_name(cmd, "SITE_CPFR");
++  if (!dir_check(cmd->tmp_pool, cmd, G_READ, path, NULL)) {
++    int xerrno = EPERM;
++
++    pr_cmd_set_name(cmd, cmd_name);
++    pr_response_add_err(R_550, "%s: %s", (char *) cmd->argv[3],
++      strerror(xerrno));
++
++    pr_cmd_set_errno(cmd, xerrno);
++    errno = xerrno;
++    return PR_ERROR(cmd);
++  }
++  pr_cmd_set_name(cmd, cmd_name);
++
+   res = pr_filter_allow_path(CURRENT_CONF, path);
+   switch (res) {
+     case 0:
+@@ -758,6 +773,7 @@ MODRET copy_cpfr(cmd_rec *cmd) {
+ MODRET copy_cpto(cmd_rec *cmd) {
+   register unsigned int i;
+   const char *from, *to = "";
++  char *cmd_name;
+   unsigned char *authenticated = NULL;
+ 
+   if (copy_engine == FALSE) {
+@@ -816,6 +832,20 @@ MODRET copy_cpto(cmd_rec *cmd) {
+ 
+   to = dir_canonical_vpath(cmd->tmp_pool, to);
+ 
++  cmd_name = cmd->argv[0];
++  pr_cmd_set_name(cmd, "SITE_CPTO");
++  if (!dir_check(cmd->tmp_pool, cmd, G_WRITE, to, NULL)) {
++    int xerrno = EPERM;
++
++    pr_cmd_set_name(cmd, cmd_name);
++    pr_response_add_err(R_550, "%s: %s", to, strerror(xerrno));
++
++    pr_cmd_set_errno(cmd, xerrno);
++    errno = xerrno;
++    return PR_ERROR(cmd);
++  }
++  pr_cmd_set_name(cmd, cmd_name);
++
+   if (copy_paths(cmd->tmp_pool, from, to) < 0) {
+     int xerrno = errno;
+     const char *err_code = R_550;
+@@ -940,7 +970,7 @@ static conftable copy_conftab[] = {
+ 
+ static cmdtable copy_cmdtab[] = {
+   { CMD, 	C_SITE, G_WRITE,	copy_copy,	FALSE,	FALSE, CL_MISC },
+-  { CMD, 	C_SITE, G_DIRS,		copy_cpfr,	FALSE,	FALSE, CL_MISC },
++  { CMD, 	C_SITE, G_READ,		copy_cpfr,	FALSE,	FALSE, CL_MISC },
+   { CMD, 	C_SITE, G_WRITE,	copy_cpto,	FALSE,	FALSE, CL_MISC },
+   { POST_CMD,	C_PASS,	G_NONE,		copy_post_pass, FALSE,	FALSE },
+   { LOG_CMD, 	C_SITE, G_NONE,		copy_log_site,	FALSE,	FALSE },
+diff --git a/tests/t/lib/ProFTPD/Tests/Modules/mod_copy.pm b/tests/t/lib/ProFTPD/Tests/Modules/mod_copy.pm
+index 778bff839..2018e71bc 100644
+--- a/tests/t/lib/ProFTPD/Tests/Modules/mod_copy.pm
++++ b/tests/t/lib/ProFTPD/Tests/Modules/mod_copy.pm
+@@ -121,6 +121,15 @@ my $TESTS = {
+     test_class => [qw(bug forking)],
+   },
+ 
++  copy_cpfr_config_limit_read_bug4372 => {
++    order => ++$order,
++    test_class => [qw(bug forking)],
++  },
++
++  copy_cpto_config_limit_write_bug4372 => {
++    order => ++$order,
++    test_class => [qw(bug forking)],
++  },
+ };
+ 
+ sub new {
+@@ -3248,6 +3257,12 @@ sub copy_config_limit_bug3399 {
+ 
+   my ($port, $config_user, $config_group) = config_write($config_file, $config);
+ 
++  my $config_subdir = $sub_dir;
++  if ($^O eq 'darwin') {
++    # MacOSX hack
++    $config_subdir = '/private' . $sub_dir;
++  }
++
+   if (open(my $fh, ">> $config_file")) {
+     print $fh <
+@@ -3256,7 +3271,7 @@ sub copy_config_limit_bug3399 {
+   
+ 
+ 
+-
++
+   
+     AllowAll
+   
+@@ -3652,4 +3667,240 @@ sub copy_cpto_timeout_bug4263 {
+   test_cleanup($setup->{log_file}, $ex);
+ }
+ 
++sub copy_cpfr_config_limit_read_bug4372 {
++  my $self = shift;
++  my $tmpdir = $self->{tmpdir};
++  my $setup = test_setup($tmpdir, 'copy');
++
++  my $src_file = File::Spec->rel2abs("$tmpdir/foo.dat");
++  if (open(my $fh, "> $src_file")) {
++    unless (close($fh)) {
++      die("Can't write $src_file: $!");
++    }
++
++  } else {
++    die("Can't open $src_file: $!");
++  }
++
++  my $config = {
++    PidFile => $setup->{pid_file},
++    ScoreboardFile => $setup->{scoreboard_file},
++    SystemLog => $setup->{log_file},
++    TraceLog => $setup->{log_file},
++    Trace => 'copy:20 timer:20',
++
++    AuthUserFile => $setup->{auth_user_file},
++    AuthGroupFile => $setup->{auth_group_file},
++    TimeoutIdle => 3,
++
++    IfModules => {
++      'mod_delay.c' => {
++        DelayEngine => 'off',
++      },
++    },
++  };
++
++  my ($port, $config_user, $config_group) = config_write($setup->{config_file},
++    $config);
++
++  if (open(my $fh, ">> $setup->{config_file}")) {
++    print $fh <
++  
++    DenyAll
++  
++
++EOC
++    unless (close($fh)) {
++      die("Can't write $setup->{config_file}: $!");
++    }
++
++  } else {
++    die("Can't open $setup->{config_file}: $!");
++  }
++
++  # Open pipes, for use between the parent and child processes.  Specifically,
++  # the child will indicate when it's done with its test by writing a message
++  # to the parent.
++  my ($rfh, $wfh);
++  unless (pipe($rfh, $wfh)) {
++    die("Can't open pipe: $!");
++  }
++
++  my $ex;
++
++  # Fork child
++  $self->handle_sigchld();
++  defined(my $pid = fork()) or die("Can't fork: $!");
++  if ($pid) {
++    eval {
++      my $client = ProFTPD::TestSuite::FTP->new('127.0.0.1', $port, 0, 1);
++      $client->login($setup->{user}, $setup->{passwd});
++
++      eval { $client->site('CPFR', 'foo.dat') };
++      unless ($@) {
++        die("SITE CPFR succeeded unexpectedly");
++      }
++
++      my $resp_code = $client->response_code();
++      my $resp_msg = $client->response_msg();
++
++      my $expected = 550;
++      $self->assert($expected == $resp_code,
++        test_msg("Expected response code $expected, got $resp_code"));
++
++      $expected = 'Operation not permitted';
++      $self->assert(qr/$expected/, $resp_msg,
++        test_msg("Expected response message '$expected', got '$resp_msg'"));
++
++      $client->quit();
++    };
++    if ($@) {
++      $ex = $@;
++    }
++
++    $wfh->print("done\n");
++    $wfh->flush();
++
++  } else {
++    eval { server_wait($setup->{config_file}, $rfh, 30) };
++    if ($@) {
++      warn($@);
++      exit 1;
++    }
++
++    exit 0;
++  }
++
++  # Stop server
++  server_stop($setup->{pid_file});
++  $self->assert_child_ok($pid);
++
++  test_cleanup($setup->{log_file}, $ex);
++}
++
++sub copy_cpto_config_limit_write_bug4372 {
++  my $self = shift;
++  my $tmpdir = $self->{tmpdir};
++  my $setup = test_setup($tmpdir, 'copy');
++
++  my $src_file = File::Spec->rel2abs("$tmpdir/foo.dat");
++  if (open(my $fh, "> $src_file")) {
++    unless (close($fh)) {
++      die("Can't write $src_file: $!");
++    }
++
++  } else {
++    die("Can't open $src_file: $!");
++  }
++
++  my $dst_file = File::Spec->rel2abs("$tmpdir/bar.dat");
++
++  my $config = {
++    PidFile => $setup->{pid_file},
++    ScoreboardFile => $setup->{scoreboard_file},
++    SystemLog => $setup->{log_file},
++    TraceLog => $setup->{log_file},
++    Trace => 'copy:20 timer:20',
++
++    AuthUserFile => $setup->{auth_user_file},
++    AuthGroupFile => $setup->{auth_group_file},
++    TimeoutIdle => 3,
++
++    IfModules => {
++      'mod_delay.c' => {
++        DelayEngine => 'off',
++      },
++    },
++  };
++
++  my ($port, $config_user, $config_group) = config_write($setup->{config_file},
++    $config);
++
++  if (open(my $fh, ">> $setup->{config_file}")) {
++    print $fh <
++  
++    DenyAll
++  
++
++EOC
++    unless (close($fh)) {
++      die("Can't write $setup->{config_file}: $!");
++    }
++
++  } else {
++    die("Can't open $setup->{config_file}: $!");
++  }
++
++  # Open pipes, for use between the parent and child processes.  Specifically,
++  # the child will indicate when it's done with its test by writing a message
++  # to the parent.
++  my ($rfh, $wfh);
++  unless (pipe($rfh, $wfh)) {
++    die("Can't open pipe: $!");
++  }
++
++  my $ex;
++
++  # Fork child
++  $self->handle_sigchld();
++  defined(my $pid = fork()) or die("Can't fork: $!");
++  if ($pid) {
++    eval {
++      my $client = ProFTPD::TestSuite::FTP->new('127.0.0.1', $port, 0, 1);
++      $client->login($setup->{user}, $setup->{passwd});
++
++      my ($resp_code, $resp_msg) = $client->site('CPFR', 'foo.dat');
++
++      my $expected = 350;
++      $self->assert($expected == $resp_code,
++        test_msg("Expected response code $expected, got $resp_code"));
++
++      $expected = 'File or directory exists, ready for destination name';
++      $self->assert($expected eq $resp_msg,
++        test_msg("Expected response message '$expected', got '$resp_msg'"));
++
++      eval { $client->site('CPTO', 'bar.dat') };
++      unless ($@) {
++        die('SITE CPTO succeeded unexpectedly');
++      }
++
++      my $resp_code = $client->response_code();
++      my $resp_msg = $client->response_msg();
++
++      my $expected = 550;
++      $self->assert($expected == $resp_code,
++        test_msg("Expected response code $expected, got $resp_code"));
++
++      $expected = 'Operation not permitted';
++      $self->assert(qr/$expected/, $resp_msg,
++        test_msg("Expected response message '$expected', got '$resp_msg'"));
++
++      $client->quit();
++    };
++    if ($@) {
++      $ex = $@;
++    }
++
++    $wfh->print("done\n");
++    $wfh->flush();
++
++  } else {
++    eval { server_wait($setup->{config_file}, $rfh, 30) };
++    if ($@) {
++      warn($@);
++      exit 1;
++    }
++
++    exit 0;
++  }
++
++  # Stop server
++  server_stop($setup->{pid_file});
++  $self->assert_child_ok($pid);
++
++  test_cleanup($setup->{log_file}, $ex);
++}
++
+ 1;
diff --git a/buildroot/package/proftpd/proftpd.hash b/buildroot/package/proftpd/proftpd.hash
index 537222f01..47bc8fe81 100644
--- a/buildroot/package/proftpd/proftpd.hash
+++ b/buildroot/package/proftpd/proftpd.hash
@@ -2,3 +2,4 @@
 md5 13270911c42aac842435f18205546a1b proftpd-1.3.6.tar.gz
 # Locally calculated
 sha256 91ef74b143495d5ff97c4d4770c6804072a8c8eb1ad1ecc8cc541b40e152ecaf proftpd-1.3.6.tar.gz
+sha256 391a473d755c29b5326fb726326ff3c37e42512f53a8f5789fc310232150bf80 COPYING
diff --git a/buildroot/package/proj/proj.mk b/buildroot/package/proj/proj.mk
index 0b239b2bb..2969eb57a 100644
--- a/buildroot/package/proj/proj.mk
+++ b/buildroot/package/proj/proj.mk
@@ -10,4 +10,12 @@ PROJ_LICENSE = MIT
 PROJ_LICENSE_FILES = COPYING
 PROJ_INSTALL_STAGING = YES
 
+PROJ_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_68485),y)
+PROJ_CFLAGS += -O0
+endif
+
+PROJ_CONF_ENV = CFLAGS="$(PROJ_CFLAGS)"
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/prosody/prosody.hash b/buildroot/package/prosody/prosody.hash
index f3f9aa477..d7d1d06ed 100644
--- a/buildroot/package/prosody/prosody.hash
+++ b/buildroot/package/prosody/prosody.hash
@@ -1,8 +1,8 @@
 # Locally computed:
-md5    b4529e0cf8e0ee82a2f677e404c3df35  prosody-0.11.2.tar.gz
-sha1   0508cfc1c3c74a7eb8fdac2ed50435e190930f6a  prosody-0.11.2.tar.gz
-sha256 8911f6dc29b9e0c4edf9e61dc23fa22d77bc42c4caf28b809ab843b2f08e4831  prosody-0.11.2.tar.gz
-sha512 22e55a551a40c92f38a1ed1de5fdcad574d699d58c2e27f93c3d465b55487b8e923c2ba088daf93c7140cbafb0d429687e0b662c8bb1c1aba4b79ac1ea271cd1  prosody-0.11.2.tar.gz
+md5    2cf85cd8f7fc061916d97a169e850a0e  prosody-0.11.3.tar.gz
+sha1   87ec8039bf297ba9bc4da44b2ba42f4b035e73ca  prosody-0.11.3.tar.gz
+sha256 cfdabd6f42a9fc5db300221967c518c26bd4b6e62def721c1626894d6325bf87  prosody-0.11.3.tar.gz
+sha512 07239433c7c65184ca24d665c92b787ff9e4a5ee190ab90dede802ffd2cbd97855356d818858871e62284e9923f485b3468ab1baed5d3fb13aac0551a38967eb  prosody-0.11.3.tar.gz
 
 # Hash for license file:
 sha256 bbbdc1c5426e5944cf869fc0faeaf19d88a220cd2b39ea98b7b8e86b0e88a2ef  COPYING
diff --git a/buildroot/package/prosody/prosody.mk b/buildroot/package/prosody/prosody.mk
index c2111f6b8..05ea3d2e4 100644
--- a/buildroot/package/prosody/prosody.mk
+++ b/buildroot/package/prosody/prosody.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-PROSODY_VERSION = 0.11.2
+PROSODY_VERSION = 0.11.3
 PROSODY_SITE = https://prosody.im/downloads/source
 PROSODY_LICENSE = MIT
 PROSODY_LICENSE_FILES = COPYING
diff --git a/buildroot/package/protobuf/protobuf.mk b/buildroot/package/protobuf/protobuf.mk
index 9caf87ed9..919aae5b7 100644
--- a/buildroot/package/protobuf/protobuf.mk
+++ b/buildroot/package/protobuf/protobuf.mk
@@ -17,6 +17,14 @@ PROTOBUF_LICENSE_FILES = LICENSE
 PROTOBUF_DEPENDENCIES = host-protobuf
 PROTOBUF_CONF_OPTS = --with-protoc=$(HOST_DIR)/bin/protoc
 
+PROTOBUF_CXXFLAGS = $(TARGET_CXXFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+PROTOBUF_CXXFLAGS += -O0
+endif
+
+PROTOBUF_CONF_ENV = CXXFLAGS="$(PROTOBUF_CXXFLAGS)"
+
 ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
 PROTOBUF_CONF_ENV += LIBS=-latomic
 endif
diff --git a/buildroot/package/psplash/psplash.hash b/buildroot/package/psplash/psplash.hash
index 68c6ffa8a..c8865697c 100644
--- a/buildroot/package/psplash/psplash.hash
+++ b/buildroot/package/psplash/psplash.hash
@@ -1,2 +1,3 @@
 # Locally computed
 sha256 aaddb20ef892dfb03d4e046cc634159bbcdfe555f7291652dde2b7d4cf491289  psplash-5b3c1cc28f5abdc2c33830150b48b278cc4f7bca.tar.gz
+sha256 f9c375a1be4a41f7b70301dd83c91cb89e41567478859b77eef375a52d782505  COPYING
diff --git a/buildroot/package/psplash/psplash.mk b/buildroot/package/psplash/psplash.mk
index fe009785b..4a2e0de5c 100644
--- a/buildroot/package/psplash/psplash.mk
+++ b/buildroot/package/psplash/psplash.mk
@@ -7,6 +7,7 @@
 PSPLASH_VERSION = 5b3c1cc28f5abdc2c33830150b48b278cc4f7bca
 PSPLASH_SITE = git://git.yoctoproject.org/psplash
 PSPLASH_LICENSE = GPL-2.0+
+PSPLASH_LICENSE_FILES = COPYING
 PSPLASH_AUTORECONF = YES
 
 define PSPLASH_INSTALL_INIT_SYSTEMD
diff --git a/buildroot/package/putty/0001-Fix-compilation-with-NO_GSSAPI.patch b/buildroot/package/putty/0001-Fix-compilation-with-NO_GSSAPI.patch
deleted file mode 100644
index 56a29e19d..000000000
--- a/buildroot/package/putty/0001-Fix-compilation-with-NO_GSSAPI.patch
+++ /dev/null
@@ -1,266 +0,0 @@
-From 7ad08649a223a4cd61e67d8334a147f55c79399d Mon Sep 17 00:00:00 2001
-From: Jacob Nevins 
-Date: Mon, 25 Mar 2019 23:46:59 +0000
-Subject: [PATCH] Fix compilation with NO_GSSAPI.
-
-This is a fairly shallow patch, which removes the UI and interactions
-with external libraries. Some other machinery (which is dead code in
-this configuration) is left in place.
-
-Adapted by me from a patch by Jeroen Roovers.
-
-Signed-off-by: Baruch Siach 
----
-Upstream status: commit 7ad08649a22
-
- config.c        |  4 ++++
- settings.c      | 12 ++++++++++--
- ssh.c           | 16 +++++++++++++++-
- ssh2transport.c |  3 +--
- ssh2userauth.c  |  8 ++++++--
- sshserver.c     | 13 ++++++++++++-
- 6 files changed, 48 insertions(+), 8 deletions(-)
-
-diff --git a/config.c b/config.c
-index 9c299feecc21..6528a9696584 100644
---- a/config.c
-+++ b/config.c
-@@ -2442,10 +2442,12 @@ void setup_config_box(struct controlbox *b, bool midsession,
- 			      HELPCTX(ssh_kexlist),
- 			      kexlist_handler, P(NULL));
-             c->listbox.height = KEX_MAX;
-+#ifndef NO_GSSAPI
- 	    ctrl_checkbox(s, "Attempt GSSAPI key exchange",
- 			  'k', HELPCTX(ssh_gssapi),
- 			  conf_checkbox_handler,
- 			  I(CONF_try_gssapi_kex));
-+#endif
- 
- 	    s = ctrl_getset(b, "Connection/SSH/Kex", "repeat",
- 			    "Options controlling key re-exchange");
-@@ -2455,11 +2457,13 @@ void setup_config_box(struct controlbox *b, bool midsession,
- 			 conf_editbox_handler,
- 			 I(CONF_ssh_rekey_time),
- 			 I(-1));
-+#ifndef NO_GSSAPI
-             ctrl_editbox(s, "Minutes between GSS checks (0 for never)", NO_SHORTCUT, 20,
-                          HELPCTX(ssh_kex_repeat),
-                          conf_editbox_handler,
-                          I(CONF_gssapirekey),
-                          I(-1));
-+#endif
- 	    ctrl_editbox(s, "Max data before rekey (0 for no limit)", 'x', 20,
- 			 HELPCTX(ssh_kex_repeat),
- 			 conf_editbox_handler,
-diff --git a/settings.c b/settings.c
-index 8d56302677d9..54f5ab7b2919 100644
---- a/settings.c
-+++ b/settings.c
-@@ -592,21 +592,25 @@ void save_open_settings(settings_w *sesskey, Conf *conf)
-     write_setting_b(sesskey, "Compression", conf_get_bool(conf, CONF_compression));
-     write_setting_b(sesskey, "TryAgent", conf_get_bool(conf, CONF_tryagent));
-     write_setting_b(sesskey, "AgentFwd", conf_get_bool(conf, CONF_agentfwd));
-+#ifndef NO_GSSAPI
-     write_setting_b(sesskey, "GssapiFwd", conf_get_bool(conf, CONF_gssapifwd));
-+#endif
-     write_setting_b(sesskey, "ChangeUsername", conf_get_bool(conf, CONF_change_username));
-     wprefs(sesskey, "Cipher", ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
-     wprefs(sesskey, "KEX", kexnames, KEX_MAX, conf, CONF_ssh_kexlist);
-     wprefs(sesskey, "HostKey", hknames, HK_MAX, conf, CONF_ssh_hklist);
-     write_setting_i(sesskey, "RekeyTime", conf_get_int(conf, CONF_ssh_rekey_time));
-+#ifndef NO_GSSAPI
-     write_setting_i(sesskey, "GssapiRekey", conf_get_int(conf, CONF_gssapirekey));
-+#endif
-     write_setting_s(sesskey, "RekeyBytes", conf_get_str(conf, CONF_ssh_rekey_data));
-     write_setting_b(sesskey, "SshNoAuth", conf_get_bool(conf, CONF_ssh_no_userauth));
-     write_setting_b(sesskey, "SshBanner", conf_get_bool(conf, CONF_ssh_show_banner));
-     write_setting_b(sesskey, "AuthTIS", conf_get_bool(conf, CONF_try_tis_auth));
-     write_setting_b(sesskey, "AuthKI", conf_get_bool(conf, CONF_try_ki_auth));
-+#ifndef NO_GSSAPI
-     write_setting_b(sesskey, "AuthGSSAPI", conf_get_bool(conf, CONF_try_gssapi_auth));
-     write_setting_b(sesskey, "AuthGSSAPIKEX", conf_get_bool(conf, CONF_try_gssapi_kex));
--#ifndef NO_GSSAPI
-     wprefs(sesskey, "GSSLibs", gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
-     write_setting_filename(sesskey, "GSSCustom", conf_get_filename(conf, CONF_ssh_gss_custom));
- #endif
-@@ -937,7 +941,9 @@ void load_open_settings(settings_r *sesskey, Conf *conf)
-     gppb(sesskey, "TryAgent", true, conf, CONF_tryagent);
-     gppb(sesskey, "AgentFwd", false, conf, CONF_agentfwd);
-     gppb(sesskey, "ChangeUsername", false, conf, CONF_change_username);
-+#ifndef NO_GSSAPI
-     gppb(sesskey, "GssapiFwd", false, conf, CONF_gssapifwd);
-+#endif
-     gprefs(sesskey, "Cipher", "\0",
- 	   ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
-     {
-@@ -990,7 +996,9 @@ void load_open_settings(settings_r *sesskey, Conf *conf)
-     gprefs(sesskey, "HostKey", "ed25519,ecdsa,rsa,dsa,WARN",
-            hknames, HK_MAX, conf, CONF_ssh_hklist);
-     gppi(sesskey, "RekeyTime", 60, conf, CONF_ssh_rekey_time);
-+#ifndef NO_GSSAPI
-     gppi(sesskey, "GssapiRekey", GSS_DEF_REKEY_MINS, conf, CONF_gssapirekey);
-+#endif
-     gpps(sesskey, "RekeyBytes", "1G", conf, CONF_ssh_rekey_data);
-     {
- 	/* SSH-2 only by default */
-@@ -1007,9 +1015,9 @@ void load_open_settings(settings_r *sesskey, Conf *conf)
-     gppb(sesskey, "SshBanner", true, conf, CONF_ssh_show_banner);
-     gppb(sesskey, "AuthTIS", false, conf, CONF_try_tis_auth);
-     gppb(sesskey, "AuthKI", true, conf, CONF_try_ki_auth);
-+#ifndef NO_GSSAPI
-     gppb(sesskey, "AuthGSSAPI", true, conf, CONF_try_gssapi_auth);
-     gppb(sesskey, "AuthGSSAPIKEX", true, conf, CONF_try_gssapi_kex);
--#ifndef NO_GSSAPI
-     gprefs(sesskey, "GSSLibs", "\0",
- 	   gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
-     gppfile(sesskey, "GSSCustom", conf, CONF_ssh_gss_custom);
-diff --git a/ssh.c b/ssh.c
-index e35ebc64e2b5..e8ad61b8085d 100644
---- a/ssh.c
-+++ b/ssh.c
-@@ -50,7 +50,9 @@ struct Ssh {
-     ssh_sharing_state *connshare;
-     bool attempting_connshare;
- 
-+#ifndef NO_GSSAPI
-     struct ssh_connection_shared_gss_state gss_state;
-+#endif
- 
-     char *savedhost;
-     int savedport;
-@@ -252,10 +254,18 @@ static void ssh_got_ssh_version(struct ssh_version_receiver *rcv,
-                     conf_get_bool(ssh->conf, CONF_tryagent), username,
-                     conf_get_bool(ssh->conf, CONF_change_username),
-                     conf_get_bool(ssh->conf, CONF_try_ki_auth),
-+#ifndef NO_GSSAPI
-                     conf_get_bool(ssh->conf, CONF_try_gssapi_auth),
-                     conf_get_bool(ssh->conf, CONF_try_gssapi_kex),
-                     conf_get_bool(ssh->conf, CONF_gssapifwd),
--                    &ssh->gss_state);
-+                    &ssh->gss_state
-+#else
-+                    false,
-+                    false,
-+                    false,
-+                    NULL
-+#endif
-+                    );
-                 ssh_connect_ppl(ssh, userauth_layer);
-                 transport_child_layer = userauth_layer;
- 
-@@ -267,7 +277,11 @@ static void ssh_got_ssh_version(struct ssh_version_receiver *rcv,
-                 ssh->fullhostname,
-                 ssh_verstring_get_local(old_bpp),
-                 ssh_verstring_get_remote(old_bpp),
-+#ifndef NO_GSSAPI
-                 &ssh->gss_state,
-+#else
-+                NULL,
-+#endif
-                 &ssh->stats, transport_child_layer, false);
-             ssh_connect_ppl(ssh, ssh->base_layer);
- 
-diff --git a/ssh2transport.c b/ssh2transport.c
-index 8640d89d4be4..5e8955a0275f 100644
---- a/ssh2transport.c
-+++ b/ssh2transport.c
-@@ -1781,6 +1781,7 @@ static void ssh2_transport_gss_update(struct ssh2_transport_state *s,
-     if (mins > 0 && s->gss_ctxt_lifetime <= mins * 60)
-         s->gss_status |= GSS_CTXT_EXPIRES;
- }
-+#endif /* NO_GSSAPI */
- 
- ptrlen ssh2_transport_get_session_id(PacketProtocolLayer *ppl)
- {
-@@ -1805,8 +1806,6 @@ void ssh2_transport_notify_auth_done(PacketProtocolLayer *ppl)
-     queue_idempotent_callback(&s->ppl.ic_process_queue);
- }
- 
--#endif /* NO_GSSAPI */
--
- static bool ssh2_transport_get_specials(
-     PacketProtocolLayer *ppl, add_special_fn_t add_special, void *ctx)
- {
-diff --git a/ssh2userauth.c b/ssh2userauth.c
-index fc4139230557..7f5a129295ab 100644
---- a/ssh2userauth.c
-+++ b/ssh2userauth.c
-@@ -613,8 +613,10 @@ static void ssh2_userauth_process_queue(PacketProtocolLayer *ppl)
-                  * Scan it for method identifiers we know about.
-                  */
-                 bool srv_pubkey = false, srv_passwd = false;
--                bool srv_keyb_inter = false, srv_gssapi = false;
--                bool srv_gssapi_keyex_auth = false;
-+                bool srv_keyb_inter = false;
-+#ifndef NO_GSSAPI
-+                bool srv_gssapi = false, srv_gssapi_keyex_auth = false;
-+#endif
- 
-                 for (ptrlen method; get_commasep_word(&methods, &method) ;) {
-                     if (ptrlen_eq_string(method, "publickey"))
-@@ -623,10 +625,12 @@ static void ssh2_userauth_process_queue(PacketProtocolLayer *ppl)
-                         srv_passwd = true;
-                     else if (ptrlen_eq_string(method, "keyboard-interactive"))
-                         srv_keyb_inter = true;
-+#ifndef NO_GSSAPI
-                     else if (ptrlen_eq_string(method, "gssapi-with-mic"))
-                         srv_gssapi = true;
-                     else if (ptrlen_eq_string(method, "gssapi-keyex"))
-                         srv_gssapi_keyex_auth = true;
-+#endif
-                 }
- 
-                 /*
-diff --git a/sshserver.c b/sshserver.c
-index 5f6e7ddeeaec..5c34bb356757 100644
---- a/sshserver.c
-+++ b/sshserver.c
-@@ -50,7 +50,9 @@ struct server {
-     PacketProtocolLayer *base_layer;
-     ConnectionLayer *cl;
- 
-+#ifndef NO_GSSAPI
-     struct ssh_connection_shared_gss_state gss_state;
-+#endif
- };
- 
- static void ssh_server_free_callback(void *vsrv);
-@@ -245,9 +247,11 @@ Plug *ssh_server_plug(
-     bufchain_init(&srv->out_raw);
-     bufchain_init(&srv->dummy_user_input);
- 
-+#ifndef NO_GSSAPI
-     /* FIXME: replace with sensible */
-     srv->gss_state.libs = snew(struct ssh_gss_liblist);
-     srv->gss_state.libs->nlibraries = 0;
-+#endif
- 
-     return &srv->plug;
- }
-@@ -297,7 +301,9 @@ static void ssh_server_free_callback(void *vsrv)
-     conf_free(srv->conf);
-     log_free(srv->logctx);
- 
-+#ifndef NO_GSSAPI
-     sfree(srv->gss_state.libs);        /* FIXME: replace with sensible */
-+#endif
- 
-     sfree(srv);
- 
-@@ -442,7 +448,12 @@ static void server_got_ssh_version(struct ssh_version_receiver *rcv,
-             srv->conf, NULL, 0, NULL,
-             ssh_verstring_get_remote(old_bpp),
-             ssh_verstring_get_local(old_bpp),
--            &srv->gss_state, &srv->stats, transport_child_layer, true);
-+#ifndef NO_GSSAPI
-+            &srv->gss_state,
-+#else
-+            NULL,
-+#endif
-+            &srv->stats, transport_child_layer, true);
-         ssh2_transport_provide_hostkeys(
-             srv->base_layer, srv->hostkeys, srv->nhostkeys);
-         if (userauth_layer)
--- 
-2.20.1
-
diff --git a/buildroot/package/putty/0002-unix-uxpoll-need-_XOPEN_SOURCE.patch b/buildroot/package/putty/0002-unix-uxpoll-need-_XOPEN_SOURCE.patch
deleted file mode 100644
index fb4b6c26e..000000000
--- a/buildroot/package/putty/0002-unix-uxpoll-need-_XOPEN_SOURCE.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From c1b9d07d39e33e40d2ad04be176367cf48271cfd Mon Sep 17 00:00:00 2001
-From: Baruch Siach 
-Date: Tue, 26 Mar 2019 20:00:45 +0200
-Subject: [PATCH] unix/uxpoll: need _XOPEN_SOURCE
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The code needs _XOPEN_SOURCE for some poll() flags.
-
-Fix this build failure with uClibc:
-
-./../unix/uxpoll.c: In function ‘pollwrap_add_fd_rwx’:
-./../unix/uxpoll.c:75:32: error: ‘POLLRDNORM’ undeclared (first use in this function); did you mean ‘POLLNVAL’?
- #define SELECT_R_IN (POLLIN  | POLLRDNORM | POLLRDBAND)
-                                ^
-./../unix/uxpoll.c:87:19: note: in expansion of macro ‘SELECT_R_IN’
-         events |= SELECT_R_IN;
-                   ^~~~~~~~~~~
-
-Signed-off-by: Baruch Siach 
----
-Upstream status: issue reported to upstream developers
-
- unix/uxpoll.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/unix/uxpoll.c b/unix/uxpoll.c
-index bbc5490d125d..6fe6ac7ba0c1 100644
---- a/unix/uxpoll.c
-+++ b/unix/uxpoll.c
-@@ -1,3 +1,4 @@
-+#define _XOPEN_SOURCE
- #include 
- 
- #include "putty.h"
--- 
-2.20.1
-
diff --git a/buildroot/package/putty/0003-Fix-uClibc-build-issues.patch b/buildroot/package/putty/0003-Fix-uClibc-build-issues.patch
deleted file mode 100644
index ceefded97..000000000
--- a/buildroot/package/putty/0003-Fix-uClibc-build-issues.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 0554cfbb926a2ba26efda08865b270af8536e0bb Mon Sep 17 00:00:00 2001
-From: Simon Tatham 
-Date: Tue, 26 Mar 2019 20:03:09 +0200
-Subject: [PATCH] Fix uClibc build issues
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Fix two uClibc build failures.
-
-Missing sys/auxv.h header:
-
-./../unix/uxutils.c:5:10: fatal error: sys/auxv.h: No such file or directory
- #include 
-          ^~~~~~~~~~~~
-
-Missing futimes() implementation:
-
-./../unix/uxsftpserver.c: In function ‘uss_fsetstat’:
-./../unix/uxsftpserver.c:441:25: warning: implicit declaration of function ‘futimes’; did you mean ‘lutimes’? [-Wimplicit-function-declaration]
- #define FD_PREFIX(func) f ## func
-                         ^
-./../unix/uxsftpserver.c:435:17: note: in expansion of macro ‘FD_PREFIX’
-             if (api_prefix(utimes)(api_arg, tv) < 0)                    \
-                 ^~~~~~~~~~
-./../unix/uxsftpserver.c:470:5: note: in expansion of macro ‘SETSTAT_GUTS’
-     SETSTAT_GUTS(FD_PREFIX, fd, attrs, success);
-     ^~~~~~~~~~~~
-
-unix/uxsftpserver.o: In function `uss_fsetstat':
-uxsftpserver.c:(.text+0x1058): undefined reference to `futimes'
-
-Signed-off-by: Baruch Siach 
----
-Upstream status: patch suggested by upstream developer Simon Tatham
-
- configure.ac        |  3 ++-
- unix/uxsftpserver.c | 10 ++++++++++
- unix/uxutils.c      |  3 ++-
- 3 files changed, 14 insertions(+), 2 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 35552ed24dbe..1949ef62f219 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -173,8 +173,9 @@ AC_CHECK_LIB(X11, XOpenDisplay,
-              [GTK_LIBS="-lX11 $GTK_LIBS"
-               AC_DEFINE([HAVE_LIBX11],[],[Define if libX11.a is available])])
- 
--AC_CHECK_FUNCS([getaddrinfo posix_openpt ptsname setresuid strsignal updwtmpx fstatat dirfd])
-+AC_CHECK_FUNCS([getaddrinfo posix_openpt ptsname setresuid strsignal updwtmpx fstatat dirfd futimes])
- AC_CHECK_DECLS([CLOCK_MONOTONIC], [], [], [[#include ]])
-+AC_CHECK_HEADERS([sys/auxv.h asm/hwcap.h])
- AC_SEARCH_LIBS([clock_gettime], [rt], [AC_DEFINE([HAVE_CLOCK_GETTIME],[],[Define if clock_gettime() is available])])
- 
- AC_CACHE_CHECK([for SO_PEERCRED and dependencies], [x_cv_linux_so_peercred], [
-diff --git a/unix/uxsftpserver.c b/unix/uxsftpserver.c
-index 6fab0ba090d6..a90344e04219 100644
---- a/unix/uxsftpserver.c
-+++ b/unix/uxsftpserver.c
-@@ -412,6 +412,16 @@ static void uss_fstat(SftpServer *srv, SftpReplyBuilder *reply,
-     }
- }
- 
-+#if !HAVE_FUTIMES
-+static inline int futimes(int fd, const struct timeval tv[2])
-+{
-+    /* If the OS doesn't support futimes(3) then we have to pretend it
-+     * always returns failure */
-+    errno = EINVAL;
-+    return -1;
-+}
-+#endif
-+
- /*
-  * The guts of setstat and fsetstat, macroised so that they can call
-  * fchown(fd,...) or chown(path,...) depending on parameters.
-diff --git a/unix/uxutils.c b/unix/uxutils.c
-index fcbcc4d422c1..f01bc2c14a2d 100644
---- a/unix/uxutils.c
-+++ b/unix/uxutils.c
-@@ -1,6 +1,7 @@
- #include "ssh.h"
- 
--#if defined __linux__ && (defined __arm__ || defined __aarch64__)
-+#if defined __linux__ && (defined __arm__ || defined __aarch64__) && \
-+    HAVE_SYS_AUXV_H && HAVE_ASM_HWCAP_H
- 
- #include 
- #include 
--- 
-2.20.1
-
diff --git a/buildroot/package/putty/putty.hash b/buildroot/package/putty/putty.hash
index 30f51848f..8600281ef 100644
--- a/buildroot/package/putty/putty.hash
+++ b/buildroot/package/putty/putty.hash
@@ -1,6 +1,7 @@
-# Hashes from: http://the.earth.li/~sgtatham/putty/0.71/{sha256,sha512}sums
-sha256 2f931ce2f89780cc8ca7bbed90fcd22c44515d2773f5fa954069e209b48ec6b8                                                                 putty-0.71.tar.gz
-sha512 f8791210bd5925b26d51b13f0558eea15dbac40808051165b236d6436226f5c2b0aa7d69288ed9e2bddc1066455678cfd0af73ef6b715a136c42f3b6f754ac07 putty-0.71.tar.gz
+# Hashes from: http://the.earth.li/~sgtatham/putty/0.73/{sha1,sha256,sha512}sums
+sha1 17daebb82e476adfd578f6934c28f4d2c209b7d8  putty-0.73.tar.gz
+sha256 3db0b5403fb41aecd3aa506611366650d927650b6eb3d839ad4dcc782519df1c  putty-0.73.tar.gz
+sha512 4ada4b8c6d68be44afede2676bc661fedfd1ea0b574b8232ad9aaa6f3a48baa9f4f0ded2955b3f2677a14db85a508f53c965cb00fcd7538a1ed9844031f0c5e5  putty-0.73.tar.gz
 
 # Locally calculated
 sha256 b517b4a9504ba0f651d5e590245197b88d9a81d073905cc798cc9464c5ca7ba8  LICENCE
diff --git a/buildroot/package/putty/putty.mk b/buildroot/package/putty/putty.mk
index 68622a574..5313a4f8b 100644
--- a/buildroot/package/putty/putty.mk
+++ b/buildroot/package/putty/putty.mk
@@ -4,14 +4,12 @@
 #
 ################################################################################
 
-PUTTY_VERSION = 0.71
+PUTTY_VERSION = 0.73
 PUTTY_SITE = http://the.earth.li/~sgtatham/putty/$(PUTTY_VERSION)
 PUTTY_LICENSE = MIT
 PUTTY_LICENSE_FILES = LICENCE
 PUTTY_CONF_OPTS = --disable-gtktest
 PUTTY_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -Wno-error"
-# Patching configure.ac
-PUTTY_AUTORECONF = YES
 
 ifeq ($(BR2_PACKAGE_LIBGTK2),y)
 PUTTY_CONF_OPTS += --with-gtk=2
diff --git a/buildroot/package/python-coherence/Config.in b/buildroot/package/python-coherence/Config.in
index 71f79f42e..63427964a 100644
--- a/buildroot/package/python-coherence/Config.in
+++ b/buildroot/package/python-coherence/Config.in
@@ -8,7 +8,7 @@ config BR2_PACKAGE_PYTHON_COHERENCE
 	help
 	  A DLNA/UPnP Media Server and Framework for the Digital Living.
 
-	  http://coherence-project.org/
+	  https://github.com/coherence-project/Coherence
 
 comment "python-coherence needs a toolchain w/ C++"
 	depends on BR2_PACKAGE_PYTHON
diff --git a/buildroot/package/python-crc16/Config.in b/buildroot/package/python-crc16/Config.in
index 3fd8da7a8..b7a10b66a 100644
--- a/buildroot/package/python-crc16/Config.in
+++ b/buildroot/package/python-crc16/Config.in
@@ -8,4 +8,4 @@ config BR2_PACKAGE_PYTHON_CRC16
 	  or transmission. There are many variants of CRC and CRC16,
 	  in particular.
 
-	  http://pycrc16.googlecode.com/
+	  https://code.google.com/archive/p/pycrc16/
diff --git a/buildroot/package/python-django/python-django.hash b/buildroot/package/python-django/python-django.hash
index c32511677..5d1e6c40e 100644
--- a/buildroot/package/python-django/python-django.hash
+++ b/buildroot/package/python-django/python-django.hash
@@ -1,5 +1,5 @@
 # md5, sha256 from https://pypi.org/pypi/django/json
-md5	909c2e7761893a922dcf721521d9239e  Django-2.1.9.tar.gz
-sha256	5052def4ff0a84bdf669827fdbd7b7cc1ac058f10232be6b21f37c6824f578da  Django-2.1.9.tar.gz
+md5	a9a6555d166196e502b69715341f7ad4  Django-2.2.9.tar.gz
+sha256	662a1ff78792e3fd77f16f71b1f31149489434de4b62a74895bd5d6534e635a5  Django-2.2.9.tar.gz
 # Locally computed sha256 checksums
 sha256	b846415d1b514e9c1dff14a22deb906d794bc546ca6129f950a18cd091e2a669  LICENSE
diff --git a/buildroot/package/python-django/python-django.mk b/buildroot/package/python-django/python-django.mk
index 041822ea1..d5b2c1585 100644
--- a/buildroot/package/python-django/python-django.mk
+++ b/buildroot/package/python-django/python-django.mk
@@ -4,10 +4,10 @@
 #
 ################################################################################
 
-PYTHON_DJANGO_VERSION = 2.1.9
+PYTHON_DJANGO_VERSION = 2.2.9
 PYTHON_DJANGO_SOURCE = Django-$(PYTHON_DJANGO_VERSION).tar.gz
 # The official Django site has an unpractical URL
-PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/c1/b3/3cdc60dc2e3c11236539f9470e42c5075a2e9c9f4885f5b4b912e9f19992
+PYTHON_DJANGO_SITE = https://files.pythonhosted.org/packages/2c/0d/2aa8e58c791d2aa65658fa26f2b035a9da13a6a34d1b2d991912c8a33729
 PYTHON_DJANGO_LICENSE = BSD-3-Clause
 PYTHON_DJANGO_LICENSE_FILES = LICENSE
 PYTHON_DJANGO_SETUP_TYPE = setuptools
diff --git a/buildroot/package/python-dpkt/Config.in b/buildroot/package/python-dpkt/Config.in
index f1e4ddff1..d8e3388d7 100644
--- a/buildroot/package/python-dpkt/Config.in
+++ b/buildroot/package/python-dpkt/Config.in
@@ -6,4 +6,4 @@ config BR2_PACKAGE_PYTHON_DPKT
 	  Fast, simple packet creation / parsing, with definitions
 	  for the basic TCP/IP protocols.
 
-	  http://code.google.com/p/dpkt/
+	  https://github.com/kbandla/dpkt
diff --git a/buildroot/package/python-ecdsa/python-ecdsa.hash b/buildroot/package/python-ecdsa/python-ecdsa.hash
index b4bd70638..3e2478365 100644
--- a/buildroot/package/python-ecdsa/python-ecdsa.hash
+++ b/buildroot/package/python-ecdsa/python-ecdsa.hash
@@ -1,4 +1,5 @@
-# md5 from https://pypi.python.org/pypi/ecdsa/json
-md5	1f60eda9cb5c46722856db41a3ae6670  ecdsa-0.13.tar.gz
-# sha256 calculated by scanpypi
-sha256	64cf1ee26d1cde3c73c6d7d107f835fed7c6a2904aef9eac223d57ad800c43fa  ecdsa-0.13.tar.gz
+# md5, sha256 from https://pypi.org/pypi/ecdsa/json
+md5	b1b33f7fe171eb1278de6f93eefc34f8  ecdsa-0.13.3.tar.gz
+sha256	163c80b064a763ea733870feb96f9dd9b92216cfcacd374837af18e4e8ec3d4d  ecdsa-0.13.3.tar.gz
+# Locally computed sha256 checksums
+sha256	3eca9845773d2e5b8cc9d8c119d345f00a4806e4bd660d4a3d6cdf9c0e9d8bb2  LICENSE
diff --git a/buildroot/package/python-ecdsa/python-ecdsa.mk b/buildroot/package/python-ecdsa/python-ecdsa.mk
index 75b0634e1..90e359f8b 100644
--- a/buildroot/package/python-ecdsa/python-ecdsa.mk
+++ b/buildroot/package/python-ecdsa/python-ecdsa.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-PYTHON_ECDSA_VERSION = 0.13
+PYTHON_ECDSA_VERSION = 0.13.3
 PYTHON_ECDSA_SOURCE = ecdsa-$(PYTHON_ECDSA_VERSION).tar.gz
-PYTHON_ECDSA_SITE = https://pypi.python.org/packages/source/e/ecdsa
+PYTHON_ECDSA_SITE = https://files.pythonhosted.org/packages/8c/d8/9c3596fd0f18ae0a76333492a119c00183323d8e64de1a4f4bd642856963
 PYTHON_ECDSA_SETUP_TYPE = setuptools
 PYTHON_ECDSA_LICENSE = MIT
 PYTHON_ECDSA_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/python-idna/Config.in b/buildroot/package/python-idna/Config.in
index 1fd56ceaf..e3e548d49 100644
--- a/buildroot/package/python-idna/Config.in
+++ b/buildroot/package/python-idna/Config.in
@@ -1,5 +1,7 @@
 config BR2_PACKAGE_PYTHON_IDNA
 	bool "python-idna"
+	select BR2_PACKAGE_PYTHON_UNICODEDATA if BR2_PACKAGE_PYTHON
+	select BR2_PACKAGE_PYTHON3_UNICODEDATA if BR2_PACKAGE_PYTHON3
 	help
 	  A library to support the Internationalised Domain Names in
 	  Applications (IDNA) protocol as specified in RFC 5891. This
diff --git a/buildroot/package/python-numpy/python-numpy.mk b/buildroot/package/python-numpy/python-numpy.mk
index 26a10c377..b20de6a75 100644
--- a/buildroot/package/python-numpy/python-numpy.mk
+++ b/buildroot/package/python-numpy/python-numpy.mk
@@ -13,7 +13,6 @@ PYTHON_NUMPY_SETUP_TYPE = setuptools
 
 ifeq ($(BR2_PACKAGE_CLAPACK),y)
 PYTHON_NUMPY_DEPENDENCIES += clapack
-PYTHON_NUMPY_SITE_CFG_LIBS += blas lapack
 else
 PYTHON_NUMPY_ENV += BLAS=None LAPACK=None
 endif
@@ -25,7 +24,6 @@ define PYTHON_NUMPY_CONFIGURE_CMDS
 	echo "[DEFAULT]" >> $(@D)/site.cfg
 	echo "library_dirs = $(STAGING_DIR)/usr/lib" >> $(@D)/site.cfg
 	echo "include_dirs = $(STAGING_DIR)/usr/include" >> $(@D)/site.cfg
-	echo "libraries =" $(subst $(space),$(comma),$(PYTHON_NUMPY_SITE_CFG_LIBS)) >> $(@D)/site.cfg
 endef
 
 # Some package may include few headers from NumPy, so let's install it
diff --git a/buildroot/package/python-pyasn-modules/Config.in b/buildroot/package/python-pyasn-modules/Config.in
index 387020d9d..cedd68b34 100644
--- a/buildroot/package/python-pyasn-modules/Config.in
+++ b/buildroot/package/python-pyasn-modules/Config.in
@@ -1,7 +1,7 @@
 config BR2_PACKAGE_PYTHON_PYASN_MODULES
 	bool "python-pyasn-modules"
 	depends on BR2_INSTALL_LIBSTDCPP
-	select BR2_PACKAGE_PYASN # runtime
+	select BR2_PACKAGE_PYTHON_PYASN # runtime
 	help
 	  A collection of ASN.1-based protocols modules.
 
diff --git a/buildroot/package/python-pypcap/Config.in b/buildroot/package/python-pypcap/Config.in
index 9b71575c0..9b410ecc2 100644
--- a/buildroot/package/python-pypcap/Config.in
+++ b/buildroot/package/python-pypcap/Config.in
@@ -6,4 +6,4 @@ config BR2_PACKAGE_PYTHON_PYPCAP
 	  The pypcap module is an object-oriented wrapper of the C
 	  libpcap library.
 
-	  https://code.google.com/p/pypcap/
+	  https://github.com/dugsong/pypcap
diff --git a/buildroot/package/python-pyqt5/python-pyqt5.hash b/buildroot/package/python-pyqt5/python-pyqt5.hash
index 2a7d05b49..8ef467a27 100644
--- a/buildroot/package/python-pyqt5/python-pyqt5.hash
+++ b/buildroot/package/python-pyqt5/python-pyqt5.hash
@@ -1,3 +1,6 @@
 # md5 from http://http://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.7, sha256 locally computed
 md5	e3dc21f31fd714659f0688e1eb31bacf  PyQt5_gpl-5.7.tar.gz
 sha256	892693ba5f79989abb2061dad2d5c4e6f127e9dd3240f73f8220c7152cd35b05  PyQt5_gpl-5.7.tar.gz
+
+# Hash for license file
+sha256	8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903  LICENSE
diff --git a/buildroot/package/python-pyqt5/python-pyqt5.mk b/buildroot/package/python-pyqt5/python-pyqt5.mk
index 4955936ae..b6d559cd5 100644
--- a/buildroot/package/python-pyqt5/python-pyqt5.mk
+++ b/buildroot/package/python-pyqt5/python-pyqt5.mk
@@ -11,6 +11,14 @@ PYTHON_PYQT5_LICENSE = GPL-3.0
 PYTHON_PYQT5_LICENSE_FILES = LICENSE
 
 PYTHON_PYQT5_DEPENDENCIES = python-sip host-python-sip qt5base
+PYTHON_PYQT5_MODULES = \
+	QtCore \
+	$(if $(BR2_PACKAGE_QT5BASE_DBUS),QtDBus) \
+	$(if $(BR2_PACKAGE_QT5BASE_GUI),QtGui) \
+	$(if $(BR2_PACKAGE_QT5BASE_NETWORK),QtNetwork) \
+	$(if $(BR2_PACKAGE_QT5BASE_OPENGL_LIB),QtOpenGL) \
+	$(if $(BR2_PACKAGE_QT5BASE_PRINTSUPPORT),QtPrintSupport) \
+	$(if $(BR2_PACKAGE_QT5BASE_XML),QtXml)
 
 ifeq ($(BR2_PACKAGE_PYTHON),y)
 PYTHON_PYQT5_PYTHON_DIR = python$(PYTHON_VERSION_MAJOR)
@@ -20,6 +28,103 @@ PYTHON_PYQT5_PYTHON_DIR = python$(PYTHON3_VERSION_MAJOR)
 PYTHON_PYQT5_RM_PORT_BASE = port_v2
 endif
 
+ifeq ($(BR2_PACKAGE_QT5BASE_WIDGETS),y)
+PYTHON_PYQT5_MODULES += QtWidgets
+
+# QtSql needs QtWidgets
+ifeq ($(BR2_PACKAGE_QT5BASE_SQL),y)
+PYTHON_PYQT5_MODULES += QtSql
+endif
+
+# QtTest needs QtWidgets
+ifeq ($(BR2_PACKAGE_QT5BASE_TEST),y)
+PYTHON_PYQT5_MODULES += QtTest
+endif
+endif
+
+ifeq ($(BR2_PACKAGE_QT5CONNECTIVITY),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5connectivity
+PYTHON_PYQT5_MODULES += QtBluetooth QtNfc
+endif
+
+ifeq ($(BR2_PACKAGE_QT5DECLARATIVE),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5declarative
+PYTHON_PYQT5_MODULES += QtQml
+
+# QtQuick module needs opengl
+ifeq ($(BR2_PACKAGE_QT5DECLARATIVE_QUICK)$(BR2_PACKAGE_QT5BASE_OPENGL_LIB),yy)
+PYTHON_PYQT5_MODULES += \
+	QtQuick \
+	$(if $(BR2_PACKAGE_QT5BASE_WIDGETS),QtQuickWidgets)
+endif
+endif
+
+ifeq ($(BR2_PACKAGE_QT5ENGINIO),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5enginio
+PYTHON_PYQT5_MODULES += Enginio
+endif
+
+ifeq ($(BR2_PACKAGE_QT5LOCATION),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5location
+PYTHON_PYQT5_MODULES += QtLocation QtPositioning
+endif
+
+ifeq ($(BR2_PACKAGE_QT5MULTIMEDIA),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5multimedia
+PYTHON_PYQT5_MODULES += \
+	QtMultimedia \
+	$(if $(BR2_PACKAGE_QT5BASE_WIDGETS),QtMultimediaWidgets)
+endif
+
+ifeq ($(BR2_PACKAGE_QT5SENSORS),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5sensors
+PYTHON_PYQT5_MODULES += QtSensors
+endif
+
+ifeq ($(BR2_PACKAGE_QT5SERIALPORT),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5serialport
+PYTHON_PYQT5_MODULES += QtSerialPort
+endif
+
+ifeq ($(BR2_PACKAGE_QT5SVG),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5svg
+PYTHON_PYQT5_MODULES += QtSvg
+endif
+
+ifeq ($(BR2_PACKAGE_QT5WEBCHANNEL),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5webchannel
+PYTHON_PYQT5_MODULES += QtWebChannel
+endif
+
+ifeq ($(BR2_PACKAGE_QT5WEBENGINE),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5webengine
+PYTHON_PYQT5_MODULES += \
+	QtWebEngineCore \
+	$(if $(BR2_PACKAGE_QT5BASE_WIDGETS),QtWebEngineWidgets)
+endif
+
+ifeq ($(BR2_PACKAGE_QT5WEBKIT),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5webkit
+PYTHON_PYQT5_MODULES += \
+	QtWebKit \
+	$(if $(BR2_PACKAGE_QT5BASE_WIDGETS),QtWebKitWidgets)
+endif
+
+ifeq ($(BR2_PACKAGE_QT5WEBSOCKETS),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5websockets
+PYTHON_PYQT5_MODULES += QtWebSockets
+endif
+
+ifeq ($(BR2_PACKAGE_QT5X11EXTRAS),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5x11extras
+PYTHON_PYQT5_MODULES += QtX11Extras
+endif
+
+ifeq ($(BR2_PACKAGE_QT5XMLPATTERNS),y)
+PYTHON_PYQT5_DEPENDENCIES += qt5xmlpatterns
+PYTHON_PYQT5_MODULES += QtXmlPatterns
+endif
+
 PYTHON_PYQT5_QTDETAIL_LICENSE = Open Source
 
 PYTHON_PYQT5_QTDETAIL_TYPE = shared
@@ -52,7 +157,8 @@ PYTHON_PYQT5_CONF_OPTS = \
 	-w --confirm-license \
 	--no-designer-plugin \
 	--no-docstrings \
-	--no-sip-files
+	--no-sip-files \
+	$(foreach module,$(PYTHON_PYQT5_MODULES),--enable=$(module))
 
 define PYTHON_PYQT5_CONFIGURE_CMDS
 	$(call PYTHON_PYQT5_GENERATE_QTDETAIL,$(@D))
diff --git a/buildroot/package/python-pysnmp-apps/python-pysnmp-apps.mk b/buildroot/package/python-pysnmp-apps/python-pysnmp-apps.mk
index 79c436fa7..ac43fda19 100644
--- a/buildroot/package/python-pysnmp-apps/python-pysnmp-apps.mk
+++ b/buildroot/package/python-pysnmp-apps/python-pysnmp-apps.mk
@@ -8,7 +8,7 @@ PYTHON_PYSNMP_APPS_VERSION = 0.4.1
 PYTHON_PYSNMP_APPS_SOURCE = pysnmp-apps-$(PYTHON_PYSNMP_APPS_VERSION).tar.gz
 PYTHON_PYSNMP_APPS_SITE = https://pypi.python.org/packages/source/p/pysnmp-apps
 PYTHON_PYSNMP_APPS_SETUP_TYPE = setuptools
-PYTHON_PYSNMP_APPS_LICENSE = BSD-3-Clause
+PYTHON_PYSNMP_APPS_LICENSE = BSD-2-Clause
 PYTHON_PYSNMP_APPS_LICENSE_FILES = LICENSE.txt
 
 PYTHON_PYSNMP_APPS_DEPENDENCIES = python-pysnmp
diff --git a/buildroot/package/python-subprocess32/python-subprocess32.mk b/buildroot/package/python-subprocess32/python-subprocess32.mk
index d6c57fb8b..c635196e9 100644
--- a/buildroot/package/python-subprocess32/python-subprocess32.mk
+++ b/buildroot/package/python-subprocess32/python-subprocess32.mk
@@ -11,4 +11,21 @@ PYTHON_SUBPROCESS32_SETUP_TYPE = setuptools
 PYTHON_SUBPROCESS32_LICENSE = Python-2.0
 PYTHON_SUBPROCESS32_LICENSE_FILES = LICENSE
 
+# The configure step needs to be run outside of the setup.py since it isn't
+# run correctly for cross-compiling
+define PYTHON_SUBPROCESS32_CONFIGURE_CMDS
+	(cd $(@D) && \
+	$(TARGET_CONFIGURE_OPTS) \
+	$(TARGET_CONFIGURE_ARGS) \
+	./configure \
+		--target=$(GNU_TARGET_NAME) \
+		--host=$(GNU_TARGET_NAME) \
+		--build=$(GNU_HOST_NAME) \
+		--prefix=/usr \
+		--exec-prefix=/usr \
+		--sysconfdir=/etc \
+		--program-prefix="" \
+	)
+endef
+
 $(eval $(python-package))
diff --git a/buildroot/package/python-urllib3/python-urllib3.hash b/buildroot/package/python-urllib3/python-urllib3.hash
index ec075cb4f..b3f903891 100644
--- a/buildroot/package/python-urllib3/python-urllib3.hash
+++ b/buildroot/package/python-urllib3/python-urllib3.hash
@@ -1,5 +1,5 @@
 # md5, sha256 from https://pypi.org/pypi/urllib3/json
-md5	20bb5a170a534bd0acd98bfc007fcc22  urllib3-1.24.2.tar.gz
-sha256	9a247273df709c4fedb38c711e44292304f73f39ab01beda9f6b9fc375669ac3  urllib3-1.24.2.tar.gz
+md5	1efcddca675b80f3ac110439921fc66b  urllib3-1.24.3.tar.gz
+sha256	2393a695cd12afedd0dcb26fe5d50d0cf248e5a66f75dbd89a3d4eb333a61af4  urllib3-1.24.3.tar.gz
 # Locally computed sha256 checksums
 sha256	11db569430ca5ad793f1399297b8df5041a22137abaf90642ea71da21d59121c  LICENSE.txt
diff --git a/buildroot/package/python-urllib3/python-urllib3.mk b/buildroot/package/python-urllib3/python-urllib3.mk
index 893d32d97..309e18f10 100644
--- a/buildroot/package/python-urllib3/python-urllib3.mk
+++ b/buildroot/package/python-urllib3/python-urllib3.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-PYTHON_URLLIB3_VERSION = 1.24.2
+PYTHON_URLLIB3_VERSION = 1.24.3
 PYTHON_URLLIB3_SOURCE = urllib3-$(PYTHON_URLLIB3_VERSION).tar.gz
-PYTHON_URLLIB3_SITE = https://files.pythonhosted.org/packages/fd/fa/b21f4f03176463a6cccdb612a5ff71b927e5224e83483012747c12fc5d62
+PYTHON_URLLIB3_SITE = https://files.pythonhosted.org/packages/8a/3c/1bb7ef6c435dea026f06ed9f3ba16aa93f9f4f5d3857a51a35dfa00882f1
 PYTHON_URLLIB3_LICENSE = MIT
 PYTHON_URLLIB3_LICENSE_FILES = LICENSE.txt
 PYTHON_URLLIB3_SETUP_TYPE = setuptools
diff --git a/buildroot/package/python/0002-Fix-get_python_inc-for-cross-compilation.patch b/buildroot/package/python/0002-Fix-get_python_inc-for-cross-compilation.patch
index b28ef2440..1fa4e9278 100644
--- a/buildroot/package/python/0002-Fix-get_python_inc-for-cross-compilation.patch
+++ b/buildroot/package/python/0002-Fix-get_python_inc-for-cross-compilation.patch
@@ -24,23 +24,25 @@ This patch allows to fix the
 incorrectly added to the header paths.
 
 Signed-off-by: Thomas Petazzoni 
+[Asaf: update for 2.7.17]
+Signed-off-by: Asaf Kahlon 
 ---
  Lib/distutils/sysconfig.py | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/Lib/distutils/sysconfig.py b/Lib/distutils/sysconfig.py
-index de7da1d..d72b6e5 100644
+index 1a4b792644..14c7d81c48 100644
 --- a/Lib/distutils/sysconfig.py
 +++ b/Lib/distutils/sysconfig.py
-@@ -79,7 +79,7 @@ def get_python_inc(plat_specific=0, prefix=None):
- 
+@@ -85,7 +85,7 @@ def get_python_inc(plat_specific=0, prefix=None):
      if os.name == "posix":
          if python_build:
--            buildir = os.path.dirname(sys.executable)
-+            buildir = project_base
-             if plat_specific:
-                 # python.h is located in the buildir
-                 inc_dir = buildir
+             if sys.executable:
+-                buildir = os.path.dirname(sys.executable)
++                buildir = project_base
+             else:
+                 # sys.executable can be empty if argv[0] has been changed
+                 # and Python is unable to retrieve the real program name
 -- 
-2.7.4
+2.20.1
 
diff --git a/buildroot/package/python/python.hash b/buildroot/package/python/python.hash
index 52b9984b0..aa809b9a6 100644
--- a/buildroot/package/python/python.hash
+++ b/buildroot/package/python/python.hash
@@ -1,5 +1,5 @@
-# From https://www.python.org/downloads/release/python-2716/
-md5 30157d85a2c0479c09ea2cbe61f2aaf5 Python-2.7.16.tar.xz
+# From https://www.python.org/downloads/release/python-2717/
+md5 b3b6d2c92f42a60667814358ab9f0cfd Python-2.7.17.tar.xz
 # Locally calculated
-sha256 f222ef602647eecb6853681156d32de4450a2c39f4de93bd5b20235f2e660ed7  Python-2.7.16.tar.xz
+sha256 4d43f033cdbd0aa7b7023c81b0e986fd11e653b5248dac9144d508f11812ba41  Python-2.7.17.tar.xz
 sha256 a77d71d6be6f9032e6b6e5d2cf6da68f9eeab9036edfbc043633c8979cd5e82c  LICENSE
diff --git a/buildroot/package/python/python.mk b/buildroot/package/python/python.mk
index d1e70a015..29b9e363b 100644
--- a/buildroot/package/python/python.mk
+++ b/buildroot/package/python/python.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 PYTHON_VERSION_MAJOR = 2.7
-PYTHON_VERSION = $(PYTHON_VERSION_MAJOR).16
+PYTHON_VERSION = $(PYTHON_VERSION_MAJOR).17
 PYTHON_SOURCE = Python-$(PYTHON_VERSION).tar.xz
 PYTHON_SITE = https://python.org/ftp/python/$(PYTHON_VERSION)
 PYTHON_LICENSE = Python-2.0, others
@@ -262,7 +262,9 @@ endif
 
 ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
 define PYTHON_REMOVE_PY_FILES
-	find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR) -name '*.py' -print0 | \
+	find $(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR) -name '*.py' \
+		$(if $(strip $(KEEP_PYTHON_PY_FILES)),-not \( $(call finddirclauses,$(TARGET_DIR),$(KEEP_PYTHON_PY_FILES)) \) ) \
+		-print0 | \
 		xargs -0 --no-run-if-empty rm -f
 endef
 PYTHON_TARGET_FINALIZE_HOOKS += PYTHON_REMOVE_PY_FILES
diff --git a/buildroot/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch b/buildroot/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch
index f6fa3d755..84bb881aa 100644
--- a/buildroot/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch
+++ b/buildroot/package/python3/0001-Make-the-build-of-pyc-files-conditional.patch
@@ -18,7 +18,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index 82e830727e..b38bd79121 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1393,6 +1393,7 @@ libinstall:	build_all $(srcdir)/Modules/xxmodule.c
+@@ -1395,6 +1395,7 @@ libinstall:	build_all $(srcdir)/Modules/xxmodule.c
  		$(INSTALL_DATA) $(srcdir)/Modules/xxmodule.c \
  			$(DESTDIR)$(LIBDEST)/distutils/tests ; \
  	fi
@@ -26,7 +26,7 @@ index 82e830727e..b38bd79121 100644
  	-PYTHONPATH=$(DESTDIR)$(LIBDEST)  $(RUNSHARED) \
  		$(PYTHON_FOR_BUILD) -Wi $(DESTDIR)$(LIBDEST)/compileall.py \
  		-d $(LIBDEST) -f \
-@@ -1420,6 +1421,7 @@ libinstall:	build_all $(srcdir)/Modules/xxmodule.c
+@@ -1422,6 +1423,7 @@ libinstall:	build_all $(srcdir)/Modules/xxmodule.c
  		$(PYTHON_FOR_BUILD) -Wi -OO $(DESTDIR)$(LIBDEST)/compileall.py \
  		-d $(LIBDEST)/site-packages -f \
  		-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
diff --git a/buildroot/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch b/buildroot/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch
index 647f3251d..506886210 100644
--- a/buildroot/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch
+++ b/buildroot/package/python3/0003-Add-infrastructure-to-disable-the-build-of-certain-e.patch
@@ -47,7 +47,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index b38bd79121..4ce917ab8d 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -204,6 +204,8 @@ FILEMODE=	644
+@@ -206,6 +206,8 @@ FILEMODE=	644
  # configure script arguments
  CONFIG_ARGS=	@CONFIG_ARGS@
  
@@ -56,7 +56,7 @@ index b38bd79121..4ce917ab8d 100644
  
  # Subdirectories with code
  SRCDIRS= 	@SRCDIRS@
-@@ -617,6 +619,7 @@ sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o
+@@ -619,6 +621,7 @@ sharedmods: $(BUILDPYTHON) pybuilddir.txt Modules/_math.o
  	esac; \
  	echo "$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \
  		_TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \
@@ -64,7 +64,7 @@ index b38bd79121..4ce917ab8d 100644
  		$(PYTHON_FOR_BUILD) $(srcdir)/setup.py $$quiet build"; \
  	$(RUNSHARED) CC='$(CC)' LDSHARED='$(BLDSHARED)' OPT='$(OPT)' \
  		_TCLTK_INCLUDES='$(TCLTK_INCLUDES)' _TCLTK_LIBS='$(TCLTK_LIBS)' \
-@@ -1526,7 +1529,8 @@ libainstall:	@DEF_MAKE_RULE@ python-config
+@@ -1528,7 +1531,8 @@ libainstall:	@DEF_MAKE_RULE@ python-config
  # Install the dynamically loadable modules
  # This goes into $(exec_prefix)
  sharedinstall: sharedmods
diff --git a/buildroot/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch b/buildroot/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch
index d8c5b0faf..8dd54f8b3 100644
--- a/buildroot/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch
+++ b/buildroot/package/python3/0005-Don-t-look-in-usr-lib-termcap-for-libraries.patch
@@ -12,7 +12,7 @@ diff --git a/setup.py b/setup.py
 index 86643ae8bf..cd00fbdbda 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -855,12 +855,9 @@ class PyBuildExt(build_ext):
+@@ -894,12 +894,9 @@ class PyBuildExt(build_ext):
                  pass # Issue 7384: Already linked against curses or tinfo.
              elif curses_library:
                  readline_libs.append(curses_library)
diff --git a/buildroot/package/python3/0006-Don-t-add-multiarch-paths.patch b/buildroot/package/python3/0006-Don-t-add-multiarch-paths.patch
index e55640d41..a6ba6a857 100644
--- a/buildroot/package/python3/0006-Don-t-add-multiarch-paths.patch
+++ b/buildroot/package/python3/0006-Don-t-add-multiarch-paths.patch
@@ -20,7 +20,7 @@ diff --git a/setup.py b/setup.py
 index cd00fbdbda..c956fa08d1 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -552,10 +552,10 @@ class PyBuildExt(build_ext):
+@@ -591,10 +591,10 @@ class PyBuildExt(build_ext):
          if not cross_compiling:
              add_dir_to_list(self.compiler.library_dirs, '/usr/local/lib')
              add_dir_to_list(self.compiler.include_dirs, '/usr/local/include')
diff --git a/buildroot/package/python3/0007-Abort-on-failed-module-build.patch b/buildroot/package/python3/0007-Abort-on-failed-module-build.patch
index a7071e199..e8de7a541 100644
--- a/buildroot/package/python3/0007-Abort-on-failed-module-build.patch
+++ b/buildroot/package/python3/0007-Abort-on-failed-module-build.patch
@@ -17,7 +17,7 @@ diff --git a/setup.py b/setup.py
 index c956fa08d1..b3add2be76 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -363,6 +363,7 @@ class PyBuildExt(build_ext):
+@@ -402,6 +402,7 @@ class PyBuildExt(build_ext):
              print("Failed to build these modules:")
              print_three_column(failed)
              print()
diff --git a/buildroot/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch b/buildroot/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch
index 68cba3497..31f237e22 100644
--- a/buildroot/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch
+++ b/buildroot/package/python3/0010-Misc-python-config.sh.in-ensure-sed-invocations-only.patch
@@ -53,7 +53,7 @@ index d1d3275..9e259c0 100644
  VERSION="@VERSION@"
  LIBM="@LIBM@"
  LIBC="@LIBC@"
-@@ -49,7 +50,7 @@ OPT="@OPT@"
+@@ -48,7 +49,7 @@ OPT="@OPT@"
  PY_ENABLE_SHARED="@PY_ENABLE_SHARED@"
  LDVERSION="@LDVERSION@"
  LIBDEST=${prefix_real}/lib/python${VERSION}
diff --git a/buildroot/package/python3/0011-Override-system-locale-and-set-to-default-when-addin.patch b/buildroot/package/python3/0011-Override-system-locale-and-set-to-default-when-addin.patch
index 5c645201e..2444c4da3 100644
--- a/buildroot/package/python3/0011-Override-system-locale-and-set-to-default-when-addin.patch
+++ b/buildroot/package/python3/0011-Override-system-locale-and-set-to-default-when-addin.patch
@@ -23,7 +23,7 @@ diff --git a/setup.py b/setup.py
 index b3add2be76..29bfd174d2 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -519,7 +519,7 @@ class PyBuildExt(build_ext):
+@@ -558,7 +558,7 @@ class PyBuildExt(build_ext):
          tmpfile = os.path.join(self.build_temp, 'gccpaths')
          if not os.path.exists(self.build_temp):
              os.makedirs(self.build_temp)
diff --git a/buildroot/package/python3/0013-Add-an-option-to-disable-installation-of-test-module.patch b/buildroot/package/python3/0013-Add-an-option-to-disable-installation-of-test-module.patch
index 8180880e1..355e62f50 100644
--- a/buildroot/package/python3/0013-Add-an-option-to-disable-installation-of-test-module.patch
+++ b/buildroot/package/python3/0013-Add-an-option-to-disable-installation-of-test-module.patch
@@ -19,7 +19,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index 4ce917ab8d..4110fff4ac 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1259,8 +1259,28 @@ maninstall:	altmaninstall
+@@ -1261,8 +1261,28 @@ maninstall:	altmaninstall
  
  # Install the library
  XMLLIBSUBDIRS=  xml xml/dom xml/etree xml/parsers xml/sax
@@ -54,7 +54,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index 1ff2362..194dbfc 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1334,26 +1334,24 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
+@@ -1336,26 +1336,24 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
  		test/test_importlib/source \
  		test/test_importlib/zipdata01 \
  		test/test_importlib/zipdata02 \
diff --git a/buildroot/package/python3/0014-Add-an-option-to-disable-pydoc.patch b/buildroot/package/python3/0014-Add-an-option-to-disable-pydoc.patch
index 6f6e265c7..bccd9facf 100644
--- a/buildroot/package/python3/0014-Add-an-option-to-disable-pydoc.patch
+++ b/buildroot/package/python3/0014-Add-an-option-to-disable-pydoc.patch
@@ -20,7 +20,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index 4110fff4ac..badb2af35d 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1229,7 +1229,9 @@ bininstall: altbininstall
+@@ -1231,7 +1231,9 @@ bininstall: altbininstall
  	-rm -f $(DESTDIR)$(BINDIR)/idle3
  	(cd $(DESTDIR)$(BINDIR); $(LN) -s idle$(VERSION) idle3)
  	-rm -f $(DESTDIR)$(BINDIR)/pydoc3
@@ -30,7 +30,7 @@ index 4110fff4ac..badb2af35d 100644
  	-rm -f $(DESTDIR)$(BINDIR)/2to3
  	(cd $(DESTDIR)$(BINDIR); $(LN) -s 2to3-$(VERSION) 2to3)
  	-rm -f $(DESTDIR)$(BINDIR)/pyvenv
-@@ -1277,7 +1279,7 @@ LIBSUBDIRS=	tkinter site-packages \
+@@ -1279,7 +1281,7 @@ LIBSUBDIRS=	tkinter site-packages \
  		multiprocessing multiprocessing/dummy \
  		unittest \
  		venv venv/scripts venv/scripts/common venv/scripts/posix \
@@ -39,7 +39,7 @@ index 4110fff4ac..badb2af35d 100644
  
  TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
  		tkinter/test/test_ttk test \
-@@ -1352,6 +1354,10 @@ ifeq (@TEST_MODULES@,yes)
+@@ -1354,6 +1356,10 @@ ifeq (@TEST_MODULES@,yes)
  LIBSUBDIRS += $(TESTSUBDIRS)
  endif
  
@@ -71,7 +71,7 @@ diff --git a/setup.py b/setup.py
 index 29bfd174d2..94dd337fef 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -2337,6 +2337,12 @@ def main():
+@@ -2376,6 +2376,12 @@ def main():
      # turn off warnings when deprecated modules are imported
      import warnings
      warnings.filterwarnings("ignore",category=DeprecationWarning)
@@ -84,7 +84,7 @@ index 29bfd174d2..94dd337fef 100644
      setup(# PyPI Metadata (PEP 301)
            name = "Python",
            version = sys.version.split()[0],
-@@ -2361,8 +2367,7 @@ def main():
+@@ -2400,8 +2406,7 @@ def main():
            # If you change the scripts installed here, you also need to
            # check the PyBuildScripts command above, and change the links
            # created by the bininstall target in Makefile.pre.in
diff --git a/buildroot/package/python3/0015-Add-an-option-to-disable-lib2to3.patch b/buildroot/package/python3/0015-Add-an-option-to-disable-lib2to3.patch
index d2ce91775..fade361fa 100644
--- a/buildroot/package/python3/0015-Add-an-option-to-disable-lib2to3.patch
+++ b/buildroot/package/python3/0015-Add-an-option-to-disable-lib2to3.patch
@@ -20,7 +20,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index badb2af35d..931cc3ed07 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1233,7 +1233,9 @@ ifeq (@PYDOC@,yes)
+@@ -1235,7 +1235,9 @@ ifeq (@PYDOC@,yes)
  	(cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3)
  endif
  	-rm -f $(DESTDIR)$(BINDIR)/2to3
@@ -30,7 +30,7 @@ index badb2af35d..931cc3ed07 100644
  	-rm -f $(DESTDIR)$(BINDIR)/pyvenv
  	(cd $(DESTDIR)$(BINDIR); $(LN) -s pyvenv-$(VERSION) pyvenv)
  	if test "x$(LIPO_32BIT_FLAGS)" != "x" ; then \
-@@ -1270,7 +1272,6 @@ LIBSUBDIRS=	tkinter site-packages \
+@@ -1272,7 +1274,6 @@ LIBSUBDIRS=	tkinter site-packages \
  		html json http dbm xmlrpc \
  		sqlite3 \
  		logging csv wsgiref urllib \
@@ -38,7 +38,7 @@ index badb2af35d..931cc3ed07 100644
  		ctypes ctypes/macholib \
  		idlelib idlelib/Icons \
  		distutils distutils/command $(XMLLIBSUBDIRS) \
-@@ -1340,9 +1341,6 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
+@@ -1342,9 +1343,6 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
  		test/test_email test/test_email/data \
  		test/test_json \
  		sqlite3/test \
@@ -48,7 +48,7 @@ index badb2af35d..931cc3ed07 100644
  		ctypes/test \
  		idlelib/idle_test \
  		distutils/tests \
-@@ -1350,6 +1348,14 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
+@@ -1352,6 +1350,14 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
  		test/test_tools test/test_warnings test/test_warnings/data \
  		unittest/test unittest/test/testmock
  
@@ -63,7 +63,7 @@ index badb2af35d..931cc3ed07 100644
  ifeq (@TEST_MODULES@,yes)
  LIBSUBDIRS += $(TESTSUBDIRS)
  endif
-@@ -1449,10 +1455,12 @@ ifeq (@PYC_BUILD@,yes)
+@@ -1451,10 +1457,12 @@ ifeq (@PYC_BUILD@,yes)
  		-d $(LIBDEST)/site-packages -f \
  		-x badsyntax $(DESTDIR)$(LIBDEST)/site-packages
  endif
@@ -97,7 +97,7 @@ diff --git a/setup.py b/setup.py
 index 94dd337fef..76429e1326 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -2338,10 +2338,11 @@ def main():
+@@ -2377,10 +2377,11 @@ def main():
      import warnings
      warnings.filterwarnings("ignore",category=DeprecationWarning)
  
diff --git a/buildroot/package/python3/0016-Add-option-to-disable-the-sqlite3-module.patch b/buildroot/package/python3/0016-Add-option-to-disable-the-sqlite3-module.patch
index 134a7ef8b..ed5e4cb29 100644
--- a/buildroot/package/python3/0016-Add-option-to-disable-the-sqlite3-module.patch
+++ b/buildroot/package/python3/0016-Add-option-to-disable-the-sqlite3-module.patch
@@ -16,7 +16,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index 931cc3ed07..a1ce0712cd 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1270,7 +1270,6 @@ LIBSUBDIRS=	tkinter site-packages \
+@@ -1272,7 +1272,6 @@ LIBSUBDIRS=	tkinter site-packages \
  		email email/mime \
  		ensurepip ensurepip/_bundled \
  		html json http dbm xmlrpc \
@@ -24,7 +24,7 @@ index 931cc3ed07..a1ce0712cd 100644
  		logging csv wsgiref urllib \
  		ctypes ctypes/macholib \
  		idlelib idlelib/Icons \
-@@ -1340,7 +1339,6 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
+@@ -1342,7 +1341,6 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
  		test/test_asyncio \
  		test/test_email test/test_email/data \
  		test/test_json \
@@ -32,7 +32,7 @@ index 931cc3ed07..a1ce0712cd 100644
  		ctypes/test \
  		idlelib/idle_test \
  		distutils/tests \
-@@ -1356,6 +1354,11 @@ TESTSUBDIRS += lib2to3/tests			\
+@@ -1358,6 +1356,11 @@ TESTSUBDIRS += lib2to3/tests			\
  	lib2to3/tests/data/fixers/myfixes
  endif
  
diff --git a/buildroot/package/python3/0017-Add-an-option-to-disable-the-tk-module.patch b/buildroot/package/python3/0017-Add-an-option-to-disable-the-tk-module.patch
index 57d45a22f..347057e09 100644
--- a/buildroot/package/python3/0017-Add-an-option-to-disable-the-tk-module.patch
+++ b/buildroot/package/python3/0017-Add-an-option-to-disable-the-tk-module.patch
@@ -16,7 +16,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index a1ce0712cd..dc1e917cc3 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1264,7 +1264,7 @@ maninstall:	altmaninstall
+@@ -1266,7 +1266,7 @@ maninstall:	altmaninstall
  # Install the library
  XMLLIBSUBDIRS=  xml xml/dom xml/etree xml/parsers xml/sax
  
@@ -25,7 +25,7 @@ index a1ce0712cd..dc1e917cc3 100644
  		asyncio \
  		collections concurrent concurrent/futures encodings \
  		email email/mime \
-@@ -1281,8 +1281,7 @@ LIBSUBDIRS=	tkinter site-packages \
+@@ -1283,8 +1283,7 @@ LIBSUBDIRS=	tkinter site-packages \
  		venv venv/scripts venv/scripts/common venv/scripts/posix \
  		curses
  
@@ -35,7 +35,7 @@ index a1ce0712cd..dc1e917cc3 100644
  		test/audiodata \
  		test/capath test/data \
  		test/cjkencodings test/decimaltestdata test/xmltestdata \
-@@ -1346,6 +1345,12 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
+@@ -1348,6 +1347,12 @@ TESTSUBDIRS=	tkinter/test tkinter/test/test_tkinter \
  		test/test_tools test/test_warnings test/test_warnings/data \
  		unittest/test unittest/test/testmock
  
diff --git a/buildroot/package/python3/0018-Add-an-option-to-disable-the-curses-module.patch b/buildroot/package/python3/0018-Add-an-option-to-disable-the-curses-module.patch
index 767ded5a7..847f55826 100644
--- a/buildroot/package/python3/0018-Add-an-option-to-disable-the-curses-module.patch
+++ b/buildroot/package/python3/0018-Add-an-option-to-disable-the-curses-module.patch
@@ -16,7 +16,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index dc1e917cc3..6a6bc082cd 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1278,8 +1278,7 @@ LIBSUBDIRS=	site-packages \
+@@ -1280,8 +1280,7 @@ LIBSUBDIRS=	site-packages \
  		turtledemo \
  		multiprocessing multiprocessing/dummy \
  		unittest \
@@ -26,7 +26,7 @@ index dc1e917cc3..6a6bc082cd 100644
  
  TESTSUBDIRS=	test \
  		test/audiodata \
-@@ -1351,6 +1350,10 @@ TESTSUBDIRS += tkinter/test tkinter/test/test_tkinter \
+@@ -1353,6 +1352,10 @@ TESTSUBDIRS += tkinter/test tkinter/test/test_tkinter \
  	tkinter/test/test_ttk
  endif
  
diff --git a/buildroot/package/python3/0019-Add-an-option-to-disable-expat.patch b/buildroot/package/python3/0019-Add-an-option-to-disable-expat.patch
index 6667eaf61..8855858ec 100644
--- a/buildroot/package/python3/0019-Add-an-option-to-disable-expat.patch
+++ b/buildroot/package/python3/0019-Add-an-option-to-disable-expat.patch
@@ -23,7 +23,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index 6a6bc082cd..dc4b92b6fe 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1273,7 +1273,7 @@ LIBSUBDIRS=	site-packages \
+@@ -1275,7 +1275,7 @@ LIBSUBDIRS=	site-packages \
  		logging csv wsgiref urllib \
  		ctypes ctypes/macholib \
  		idlelib idlelib/Icons \
@@ -32,7 +32,7 @@ index 6a6bc082cd..dc4b92b6fe 100644
  		importlib \
  		turtledemo \
  		multiprocessing multiprocessing/dummy \
-@@ -1354,6 +1354,10 @@ ifeq (@CURSES@,yes)
+@@ -1356,6 +1356,10 @@ ifeq (@CURSES@,yes)
  LIBSUBDIRS += curses
  endif
  
@@ -78,7 +78,7 @@ diff --git a/setup.py b/setup.py
 index 76429e1326..38aa5e605e 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -1490,7 +1490,7 @@ class PyBuildExt(build_ext):
+@@ -1529,7 +1529,7 @@ class PyBuildExt(build_ext):
          #
          # More information on Expat can be found at www.libexpat.org.
          #
diff --git a/buildroot/package/python3/0023-Add-an-option-to-disable-IDLE.patch b/buildroot/package/python3/0023-Add-an-option-to-disable-IDLE.patch
index 98607c5e1..4cec31406 100644
--- a/buildroot/package/python3/0023-Add-an-option-to-disable-IDLE.patch
+++ b/buildroot/package/python3/0023-Add-an-option-to-disable-IDLE.patch
@@ -19,7 +19,7 @@ diff --git a/Makefile.pre.in b/Makefile.pre.in
 index dc4b92b6fe..3e43066d90 100644
 --- a/Makefile.pre.in
 +++ b/Makefile.pre.in
-@@ -1227,7 +1227,9 @@ bininstall: altbininstall
+@@ -1229,7 +1229,9 @@ bininstall: altbininstall
  	-rm -f $(DESTDIR)$(LIBPC)/python3.pc
  	(cd $(DESTDIR)$(LIBPC); $(LN) -s python-$(VERSION).pc python3.pc)
  	-rm -f $(DESTDIR)$(BINDIR)/idle3
@@ -29,7 +29,7 @@ index dc4b92b6fe..3e43066d90 100644
  	-rm -f $(DESTDIR)$(BINDIR)/pydoc3
  ifeq (@PYDOC@,yes)
  	(cd $(DESTDIR)$(BINDIR); $(LN) -s pydoc$(VERSION) pydoc3)
-@@ -1272,7 +1274,6 @@ LIBSUBDIRS=	site-packages \
+@@ -1274,7 +1276,6 @@ LIBSUBDIRS=	site-packages \
  		html json http dbm xmlrpc \
  		logging csv wsgiref urllib \
  		ctypes ctypes/macholib \
@@ -37,7 +37,7 @@ index dc4b92b6fe..3e43066d90 100644
  		distutils distutils/command \
  		importlib \
  		turtledemo \
-@@ -1358,6 +1359,10 @@ ifeq (@EXPAT@,yes)
+@@ -1360,6 +1361,10 @@ ifeq (@EXPAT@,yes)
  LIBSUBDIRS += $(XMLLIBSUBDIRS)
  endif
  
@@ -69,7 +69,7 @@ diff --git a/setup.py b/setup.py
 index 38aa5e605e..d642825c1e 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -2338,11 +2338,13 @@ def main():
+@@ -2377,11 +2377,13 @@ def main():
      import warnings
      warnings.filterwarnings("ignore",category=DeprecationWarning)
  
diff --git a/buildroot/package/python3/0024-Add-an-option-to-disable-decimal.patch b/buildroot/package/python3/0024-Add-an-option-to-disable-decimal.patch
index 31ffbc6b3..5e02f0e21 100644
--- a/buildroot/package/python3/0024-Add-an-option-to-disable-decimal.patch
+++ b/buildroot/package/python3/0024-Add-an-option-to-disable-decimal.patch
@@ -50,7 +50,7 @@ diff --git a/setup.py b/setup.py
 index d642825c1e..5b98255857 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -2015,7 +2015,7 @@ class PyBuildExt(build_ext):
+@@ -2054,7 +2054,7 @@ class PyBuildExt(build_ext):
      def _decimal_ext(self):
          extra_compile_args = []
          undef_macros = []
diff --git a/buildroot/package/python3/0029-python-config.sh-don-t-reassign-prefix.patch b/buildroot/package/python3/0029-python-config.sh-don-t-reassign-prefix.patch
index 2e45bee15..0edaebdb6 100644
--- a/buildroot/package/python3/0029-python-config.sh-don-t-reassign-prefix.patch
+++ b/buildroot/package/python3/0029-python-config.sh-don-t-reassign-prefix.patch
@@ -39,7 +39,7 @@ index 9e259c0..8b249d9 100644
  exec_prefix=$(echo "$exec_prefix_build" | sed "s#^$exec_prefix_build#$prefix_real#")
  exec_prefix_real=${prefix_real}
  includedir=$(echo "@includedir@" | sed "s#^$prefix_build#$prefix_real#")
-@@ -49,7 +49,7 @@ LINKFORSHARED="@LINKFORSHARED@"
+@@ -48,7 +48,7 @@ LINKFORSHARED="@LINKFORSHARED@"
  OPT="@OPT@"
  PY_ENABLE_SHARED="@PY_ENABLE_SHARED@"
  LDVERSION="@LDVERSION@"
diff --git a/buildroot/package/python3/0030-Fix-cross-compiling-the-uuid-module.patch b/buildroot/package/python3/0030-Fix-cross-compiling-the-uuid-module.patch
index 8b4dca912..a2dcdb1b0 100644
--- a/buildroot/package/python3/0030-Fix-cross-compiling-the-uuid-module.patch
+++ b/buildroot/package/python3/0030-Fix-cross-compiling-the-uuid-module.patch
@@ -23,7 +23,7 @@ diff --git a/setup.py b/setup.py
 index 1a7085c5c4..f33d0b57b8 100644
 --- a/setup.py
 +++ b/setup.py
-@@ -1632,7 +1632,8 @@ class PyBuildExt(build_ext):
+@@ -1671,7 +1671,8 @@ class PyBuildExt(build_ext):
              missing.append('_tkinter')
  
          # Build the _uuid module if possible
diff --git a/buildroot/package/python3/0033-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch b/buildroot/package/python3/0033-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch
new file mode 100644
index 000000000..19a0f23e7
--- /dev/null
+++ b/buildroot/package/python3/0033-configure.ac-fixup-CC-print-multiarch-output-for-mus.patch
@@ -0,0 +1,48 @@
+From e1a2c27bcb9091f851ef7a9c7d59822a125a0b8e Mon Sep 17 00:00:00 2001
+From: Peter Korsgaard 
+Date: Fri, 2 Aug 2019 15:53:16 +0200
+Subject: [PATCH] configure.ac: fixup $CC --print-multiarch output for
+ musl/uclibc GCC 8+ toolchains
+
+GCC commit 6834b83784dcf0364eb820e8 (multiarch support for non-glibc linux
+systems), which is part of GCC 8+, changed the multiarch logic to use
+$arch-linux-musl / $arch-linux-uclibc rather than $arch-linux-gnu.
+
+This then causes the python3 configure script to error out:
+
+checking for the platform triplet based on compiler characteristics... powerpc-linux-gnu
+configure: error: internal configure error for the platform triplet, please file a bug report
+
+http://autobuild.buildroot.net/results/cb4/cb49c539501342e45cbe5ade82e588fcdf51f05b
+
+As it requires that the --print-multiarch output (if not empty) matches the
+deduced triplet (which always uses -linux-gnu).
+
+It isn't quite clear why --print-multiarch returns something for a
+non-multiarch toolchain on some architectures (E.G.  PowerPC), but as a
+workaround, rewrite the --print-multiarch output to match older GCC versions
+to keep the configure script happy.
+
+Signed-off-by: Peter Korsgaard 
+---
+ configure.ac | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index e5fb7e7b0b..9c64f960d6 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -724,7 +724,9 @@ then
+ fi
+ 
+ 
+-MULTIARCH=$($CC --print-multiarch 2>/dev/null)
++# GCC 8+ returns $arch-linux-{musl,uclibc} for musl/uClibc based
++# toolchains confusing python. Fix that up
++MULTIARCH=$($CC --print-multiarch 2>/dev/null | sed -E 's/-linux-(musl|uclibc)*$/-linux-gnu/')
+ AC_SUBST(MULTIARCH)
+ 
+ AC_MSG_CHECKING([for the platform triplet based on compiler characteristics])
+-- 
+2.11.0
+
diff --git a/buildroot/package/python3/python3.hash b/buildroot/package/python3/python3.hash
index d5209c23c..6e99cae59 100644
--- a/buildroot/package/python3/python3.hash
+++ b/buildroot/package/python3/python3.hash
@@ -1,5 +1,5 @@
-# From https://www.python.org/downloads/release/python-373/
-md5		93df27aec0cd18d6d42173e601ffbbfd Python-3.7.3.tar.xz
+# From https://www.python.org/downloads/release/python-376/
+md5 c08fbee72ad5c2c95b0f4e44bf6fd72c Python-3.7.6.tar.xz
 # Locally computed
-sha256 da60b54064d4cfcd9c26576f6df2690e62085123826cff2e667e72a91952d318 Python-3.7.3.tar.xz
+sha256 55a2cce72049f0794e9a11a84862e9039af9183603b78bc60d89539f82cf533f Python-3.7.6.tar.xz
 sha256 a77d71d6be6f9032e6b6e5d2cf6da68f9eeab9036edfbc043633c8979cd5e82c LICENSE
diff --git a/buildroot/package/python3/python3.mk b/buildroot/package/python3/python3.mk
index 2211cfed8..7f93372c2 100644
--- a/buildroot/package/python3/python3.mk
+++ b/buildroot/package/python3/python3.mk
@@ -5,7 +5,7 @@
 ################################################################################
 
 PYTHON3_VERSION_MAJOR = 3.7
-PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).3
+PYTHON3_VERSION = $(PYTHON3_VERSION_MAJOR).6
 PYTHON3_SOURCE = Python-$(PYTHON3_VERSION).tar.xz
 PYTHON3_SITE = https://python.org/ftp/python/$(PYTHON3_VERSION)
 PYTHON3_LICENSE = Python-2.0, others
@@ -70,10 +70,6 @@ else
 PYTHON3_CONF_OPTS += --with-expat=none
 endif
 
-ifeq ($(BR2_PACKAGE_PYTHON3_PYC_ONLY),y)
-PYTHON3_CONF_OPTS += --enable-old-stdlib-cache
-endif
-
 ifeq ($(BR2_PACKAGE_PYTHON3_SQLITE),y)
 PYTHON3_DEPENDENCIES += sqlite
 else
@@ -207,8 +203,8 @@ define PYTHON3_REMOVE_USELESS_FILES
 	rm -f $(TARGET_DIR)/usr/bin/python$(PYTHON3_VERSION_MAJOR)m-config
 	rm -f $(TARGET_DIR)/usr/bin/python3-config
 	rm -f $(TARGET_DIR)/usr/bin/smtpd.py.3
-	for i in `find $(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/config-$(PYTHON3_VERSION_MAJOR)m/ \
-		-type f -not -name pyconfig.h -a -not -name Makefile` ; do \
+	for i in `find $(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/config-$(PYTHON3_VERSION_MAJOR)m-*/ \
+		-type f -not -name Makefile` ; do \
 		rm -f $$i ; \
 	done
 	rm -rf $(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/__pycache__/
@@ -284,7 +280,9 @@ endif
 
 ifeq ($(BR2_PACKAGE_PYTHON3_PYC_ONLY),y)
 define PYTHON3_REMOVE_PY_FILES
-	find $(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR) -name '*.py' -print0 | \
+	find $(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR) -name '*.py' \
+		$(if $(strip $(KEEP_PYTHON_PY_FILES)),-not \( $(call finddirclauses,$(TARGET_DIR),$(KEEP_PYTHON_PY_FILES)) \) ) \
+		-print0 | \
 		xargs -0 --no-run-if-empty rm -f
 endef
 PYTHON3_TARGET_FINALIZE_HOOKS += PYTHON3_REMOVE_PY_FILES
diff --git a/buildroot/package/qemu/0002-configure-improve-usbfs-check.patch b/buildroot/package/qemu/0002-configure-improve-usbfs-check.patch
deleted file mode 100644
index d693b5d7e..000000000
--- a/buildroot/package/qemu/0002-configure-improve-usbfs-check.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 9672cccd64c446369b5649fe23d575917638be46 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni 
-Date: Tue, 5 Feb 2019 15:07:43 +0100
-Subject: [PATCH] configure: improve usbfs check
-
-The current check to test if usbfs support should be compiled or not
-solely relies on the presence of , without
-actually checking that all definition used by Qemu are provided by
-this header file.
-
-With sufficiently old kernel headers,  may be
-present, but some of the definitions needed by Qemu may not be
-available.
-
-This commit improves the check by building a small program that
-actually tests whether the necessary definitions are available.
-
-In addition, it fixes a bug where have_usbfs was set to "yes"
-regardless of the result of the test.
-
-Signed-off-by: Thomas Petazzoni 
----
- configure | 19 +++++++++++++++++--
- 1 file changed, 17 insertions(+), 2 deletions(-)
-
-diff --git a/configure b/configure
-index 3d89870d99..799c8e3b08 100755
---- a/configure
-+++ b/configure
-@@ -4266,10 +4266,25 @@ fi
- # check for usbfs
- have_usbfs=no
- if test "$linux_user" = "yes"; then
--  if check_include linux/usbdevice_fs.h; then
-+  cat > $TMPC << EOF
-+#include 
-+
-+#ifndef USBDEVFS_GET_CAPABILITIES
-+#error "USBDEVFS_GET_CAPABILITIES undefined"
-+#endif
-+
-+#ifndef USBDEVFS_DISCONNECT_CLAIM
-+#error "USBDEVFS_DISCONNECT_CLAIM undefined"
-+#endif
-+
-+int main(void)
-+{
-+    return 0;
-+}
-+EOF
-+  if compile_prog "" ""; then
-     have_usbfs=yes
-   fi
--  have_usbfs=yes
- fi
- 
- # check for fallocate
--- 
-2.20.1
-
diff --git a/buildroot/package/qemu/0001-user-exec-fix-usage-of-mcontext-structure-on-ARM-uCl.patch b/buildroot/package/qemu/3.1.1.1/0001-user-exec-fix-usage-of-mcontext-structure-on-ARM-uCl.patch
similarity index 100%
rename from buildroot/package/qemu/0001-user-exec-fix-usage-of-mcontext-structure-on-ARM-uCl.patch
rename to buildroot/package/qemu/3.1.1.1/0001-user-exec-fix-usage-of-mcontext-structure-on-ARM-uCl.patch
diff --git a/buildroot/package/qemu/3.1.1.1/0002-linux-user-fix-to-handle-variably-sized-SIOCGSTAMP-with-new-kernels.patch b/buildroot/package/qemu/3.1.1.1/0002-linux-user-fix-to-handle-variably-sized-SIOCGSTAMP-with-new-kernels.patch
new file mode 100644
index 000000000..a757d1f1a
--- /dev/null
+++ b/buildroot/package/qemu/3.1.1.1/0002-linux-user-fix-to-handle-variably-sized-SIOCGSTAMP-with-new-kernels.patch
@@ -0,0 +1,337 @@
+From 6d5d5dde9adb5acb32e6b8e3dfbf47fff0f308d2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Daniel=20P=2E=20Berrang=C3=A9?= 
+Date: Thu, 18 Jul 2019 15:06:41 +0200
+Subject: [PATCH] linux-user: fix to handle variably sized SIOCGSTAMP with new
+ kernels
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The SIOCGSTAMP symbol was previously defined in the
+asm-generic/sockios.h header file. QEMU sees that header
+indirectly via sys/socket.h
+
+In linux kernel commit 0768e17073dc527ccd18ed5f96ce85f9985e9115
+the asm-generic/sockios.h header no longer defines SIOCGSTAMP.
+Instead it provides only SIOCGSTAMP_OLD, which only uses a
+32-bit time_t on 32-bit architectures.
+
+The linux/sockios.h header then defines SIOCGSTAMP using
+either SIOCGSTAMP_OLD or SIOCGSTAMP_NEW as appropriate. If
+SIOCGSTAMP_NEW is used, then the tv_sec field is 64-bit even
+on 32-bit architectures
+
+To cope with this we must now convert the old and new type from
+the target to the host one.
+
+Signed-off-by: Daniel P. Berrangé 
+Signed-off-by: Laurent Vivier 
+Reviewed-by: Arnd Bergmann 
+Message-Id: <20190718130641.15294-1-laurent@vivier.eu>
+Signed-off-by: Laurent Vivier 
+
+[Retrieved (and backported to 3.1.0) from:
+https://github.com/qemu/qemu/commit/6d5d5dde9adb5acb32e6b8e3dfbf47fff0f308d2]
+Signed-off-by: Fabrice Fontaine 
+---
+ linux-user/ioctls.h        |  21 +++++-
+ linux-user/syscall.c       | 140 +++++++++++++++++++++++++++++--------
+ linux-user/syscall_defs.h  |  30 +++++++-
+ linux-user/syscall_types.h |   6 --
+ 4 files changed, 159 insertions(+), 38 deletions(-)
+
+diff --git a/linux-user/ioctls.h b/linux-user/ioctls.h
+index 5e84dc7c3a7..3281c97ca26 100644
+--- a/linux-user/ioctls.h
++++ b/linux-user/ioctls.h
+@@ -222,8 +222,25 @@
+   IOCTL(SIOCGIWNAME, IOC_W | IOC_R, MK_PTR(MK_STRUCT(STRUCT_char_ifreq)))
+   IOCTL(SIOCSPGRP, IOC_W, MK_PTR(TYPE_INT)) /* pid_t */
+   IOCTL(SIOCGPGRP, IOC_R, MK_PTR(TYPE_INT)) /* pid_t */
+-  IOCTL(SIOCGSTAMP, IOC_R, MK_PTR(MK_STRUCT(STRUCT_timeval)))
+-  IOCTL(SIOCGSTAMPNS, IOC_R, MK_PTR(MK_STRUCT(STRUCT_timespec)))
++
++  /*
++   * We can't use IOCTL_SPECIAL() because it will set
++   * host_cmd to XXX_OLD and XXX_NEW and these macros
++   * are not defined with kernel prior to 5.2.
++   * We must set host_cmd to the same value as in target_cmd
++   * otherwise the consistency check in syscall_init()
++   * will trigger an error.
++   * host_cmd is ignored by the do_ioctl_XXX() helpers.
++   * FIXME: create a macro to define this kind of entry
++   */
++  { TARGET_SIOCGSTAMP_OLD, TARGET_SIOCGSTAMP_OLD,
++    "SIOCGSTAMP_OLD", IOC_R, do_ioctl_SIOCGSTAMP },
++  { TARGET_SIOCGSTAMPNS_OLD, TARGET_SIOCGSTAMPNS_OLD,
++    "SIOCGSTAMPNS_OLD", IOC_R, do_ioctl_SIOCGSTAMPNS },
++  { TARGET_SIOCGSTAMP_NEW, TARGET_SIOCGSTAMP_NEW,
++    "SIOCGSTAMP_NEW", IOC_R, do_ioctl_SIOCGSTAMP },
++  { TARGET_SIOCGSTAMPNS_NEW, TARGET_SIOCGSTAMPNS_NEW,
++    "SIOCGSTAMPNS_NEW", IOC_R, do_ioctl_SIOCGSTAMPNS },
+ 
+   IOCTL(RNDGETENTCNT, IOC_R, MK_PTR(TYPE_INT))
+   IOCTL(RNDADDTOENTCNT, IOC_W, MK_PTR(TYPE_INT))
+diff --git a/linux-user/syscall.c b/linux-user/syscall.c
+index 39a37496fed..8367cb138df 100644
+--- a/linux-user/syscall.c
++++ b/linux-user/syscall.c
+@@ -37,6 +37,7 @@
+ #include 
+ #include 
+ #include 
++#include 
+ #include 
+ #include 
+ #include 
+@@ -1126,8 +1127,9 @@ static inline abi_long copy_from_user_timeval(struct timeval *tv,
+ {
+     struct target_timeval *target_tv;
+ 
+-    if (!lock_user_struct(VERIFY_READ, target_tv, target_tv_addr, 1))
++    if (!lock_user_struct(VERIFY_READ, target_tv, target_tv_addr, 1)) {
+         return -TARGET_EFAULT;
++    }
+ 
+     __get_user(tv->tv_sec, &target_tv->tv_sec);
+     __get_user(tv->tv_usec, &target_tv->tv_usec);
+@@ -1142,8 +1144,26 @@ static inline abi_long copy_to_user_timeval(abi_ulong target_tv_addr,
+ {
+     struct target_timeval *target_tv;
+ 
+-    if (!lock_user_struct(VERIFY_WRITE, target_tv, target_tv_addr, 0))
++    if (!lock_user_struct(VERIFY_WRITE, target_tv, target_tv_addr, 0)) {
++        return -TARGET_EFAULT;
++    }
++
++    __put_user(tv->tv_sec, &target_tv->tv_sec);
++    __put_user(tv->tv_usec, &target_tv->tv_usec);
++
++    unlock_user_struct(target_tv, target_tv_addr, 1);
++
++    return 0;
++}
++
++static inline abi_long copy_to_user_timeval64(abi_ulong target_tv_addr,
++                                             const struct timeval *tv)
++{
++    struct target__kernel_sock_timeval *target_tv;
++
++    if (!lock_user_struct(VERIFY_WRITE, target_tv, target_tv_addr, 0)) {
+         return -TARGET_EFAULT;
++    }
+ 
+     __put_user(tv->tv_sec, &target_tv->tv_sec);
+     __put_user(tv->tv_usec, &target_tv->tv_usec);
+@@ -1153,6 +1173,48 @@ static inline abi_long copy_to_user_timeval(abi_ulong target_tv_addr,
+     return 0;
+ }
+ 
++static inline abi_long target_to_host_timespec(struct timespec *host_ts,
++                                               abi_ulong target_addr)
++{
++    struct target_timespec *target_ts;
++
++    if (!lock_user_struct(VERIFY_READ, target_ts, target_addr, 1)) {
++        return -TARGET_EFAULT;
++    }
++    __get_user(host_ts->tv_sec, &target_ts->tv_sec);
++    __get_user(host_ts->tv_nsec, &target_ts->tv_nsec);
++    unlock_user_struct(target_ts, target_addr, 0);
++    return 0;
++}
++
++static inline abi_long host_to_target_timespec(abi_ulong target_addr,
++                                               struct timespec *host_ts)
++{
++    struct target_timespec *target_ts;
++
++    if (!lock_user_struct(VERIFY_WRITE, target_ts, target_addr, 0)) {
++        return -TARGET_EFAULT;
++    }
++    __put_user(host_ts->tv_sec, &target_ts->tv_sec);
++    __put_user(host_ts->tv_nsec, &target_ts->tv_nsec);
++    unlock_user_struct(target_ts, target_addr, 1);
++    return 0;
++}
++
++static inline abi_long host_to_target_timespec64(abi_ulong target_addr,
++                                                 struct timespec *host_ts)
++{
++    struct target__kernel_timespec *target_ts;
++
++    if (!lock_user_struct(VERIFY_WRITE, target_ts, target_addr, 0)) {
++        return -TARGET_EFAULT;
++    }
++    __put_user(host_ts->tv_sec, &target_ts->tv_sec);
++    __put_user(host_ts->tv_nsec, &target_ts->tv_nsec);
++    unlock_user_struct(target_ts, target_addr, 1);
++    return 0;
++}
++
+ static inline abi_long copy_from_user_timezone(struct timezone *tz,
+                                                abi_ulong target_tz_addr)
+ {
+@@ -4899,6 +4961,54 @@ static abi_long do_ioctl_kdsigaccept(const IOCTLEntry *ie, uint8_t *buf_temp,
+     return get_errno(safe_ioctl(fd, ie->host_cmd, sig));
+ }
+ 
++static abi_long do_ioctl_SIOCGSTAMP(const IOCTLEntry *ie, uint8_t *buf_temp,
++                                    int fd, int cmd, abi_long arg)
++{
++    struct timeval tv;
++    abi_long ret;
++
++    ret = get_errno(safe_ioctl(fd, SIOCGSTAMP, &tv));
++    if (is_error(ret)) {
++        return ret;
++    }
++
++    if (cmd == (int)TARGET_SIOCGSTAMP_OLD) {
++        if (copy_to_user_timeval(arg, &tv)) {
++            return -TARGET_EFAULT;
++        }
++    } else {
++        if (copy_to_user_timeval64(arg, &tv)) {
++            return -TARGET_EFAULT;
++        }
++    }
++
++    return ret;
++}
++
++static abi_long do_ioctl_SIOCGSTAMPNS(const IOCTLEntry *ie, uint8_t *buf_temp,
++                                      int fd, int cmd, abi_long arg)
++{
++    struct timespec ts;
++    abi_long ret;
++
++    ret = get_errno(safe_ioctl(fd, SIOCGSTAMPNS, &ts));
++    if (is_error(ret)) {
++        return ret;
++    }
++
++    if (cmd == (int)TARGET_SIOCGSTAMPNS_OLD) {
++        if (host_to_target_timespec(arg, &ts)) {
++            return -TARGET_EFAULT;
++        }
++    } else{
++        if (host_to_target_timespec64(arg, &ts)) {
++            return -TARGET_EFAULT;
++        }
++    }
++
++    return ret;
++}
++
+ #ifdef TIOCGPTPEER
+ static abi_long do_ioctl_tiocgptpeer(const IOCTLEntry *ie, uint8_t *buf_temp,
+                                      int fd, int cmd, abi_long arg)
+@@ -6271,32 +6381,6 @@ static inline abi_long target_ftruncate64(void *cpu_env, abi_long arg1,
+ }
+ #endif
+ 
+-static inline abi_long target_to_host_timespec(struct timespec *host_ts,
+-                                               abi_ulong target_addr)
+-{
+-    struct target_timespec *target_ts;
+-
+-    if (!lock_user_struct(VERIFY_READ, target_ts, target_addr, 1))
+-        return -TARGET_EFAULT;
+-    __get_user(host_ts->tv_sec, &target_ts->tv_sec);
+-    __get_user(host_ts->tv_nsec, &target_ts->tv_nsec);
+-    unlock_user_struct(target_ts, target_addr, 0);
+-    return 0;
+-}
+-
+-static inline abi_long host_to_target_timespec(abi_ulong target_addr,
+-                                               struct timespec *host_ts)
+-{
+-    struct target_timespec *target_ts;
+-
+-    if (!lock_user_struct(VERIFY_WRITE, target_ts, target_addr, 0))
+-        return -TARGET_EFAULT;
+-    __put_user(host_ts->tv_sec, &target_ts->tv_sec);
+-    __put_user(host_ts->tv_nsec, &target_ts->tv_nsec);
+-    unlock_user_struct(target_ts, target_addr, 1);
+-    return 0;
+-}
+-
+ static inline abi_long target_to_host_itimerspec(struct itimerspec *host_itspec,
+                                                  abi_ulong target_addr)
+ {
+diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
+index fffa89f2564..06622703008 100644
+--- a/linux-user/syscall_defs.h
++++ b/linux-user/syscall_defs.h
+@@ -209,16 +209,34 @@ struct target_linger {
+     abi_int l_linger;       /* How long to linger for       */
+ };
+ 
++#if defined(TARGET_SPARC64) && !defined(TARGET_ABI32)
++struct target_timeval {
++    abi_long tv_sec;
++    abi_int tv_usec;
++};
++#define target__kernel_sock_timeval target_timeval
++#else
+ struct target_timeval {
+     abi_long tv_sec;
+     abi_long tv_usec;
+ };
+ 
++struct target__kernel_sock_timeval {
++    abi_llong tv_sec;
++    abi_llong tv_usec;
++};
++#endif
++
+ struct target_timespec {
+     abi_long tv_sec;
+     abi_long tv_nsec;
+ };
+ 
++struct target__kernel_timespec {
++    abi_llong tv_sec;
++    abi_llong tv_nsec;
++};
++
+ struct target_timezone {
+     abi_int tz_minuteswest;
+     abi_int tz_dsttime;
+@@ -749,8 +767,16 @@ struct target_pollfd {
+ #define TARGET_SIOCATMARK      0x8905
+ #define TARGET_SIOCGPGRP       0x8904
+ #endif
+-#define TARGET_SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
+-#define TARGET_SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
++#if defined(TARGET_SH4)
++#define TARGET_SIOCGSTAMP_OLD   TARGET_IOR('s', 100, struct target_timeval)
++#define TARGET_SIOCGSTAMPNS_OLD TARGET_IOR('s', 101, struct target_timespec)
++#else
++#define TARGET_SIOCGSTAMP_OLD   0x8906
++#define TARGET_SIOCGSTAMPNS_OLD 0x8907
++#endif
++
++#define TARGET_SIOCGSTAMP_NEW   TARGET_IOR(0x89, 0x06, abi_llong[2])
++#define TARGET_SIOCGSTAMPNS_NEW TARGET_IOR(0x89, 0x07, abi_llong[2])
+ 
+ /* Networking ioctls */
+ #define TARGET_SIOCADDRT       0x890B          /* add routing table entry */
+diff --git a/linux-user/syscall_types.h b/linux-user/syscall_types.h
+index b98a23b0f1b..4e369838262 100644
+--- a/linux-user/syscall_types.h
++++ b/linux-user/syscall_types.h
+@@ -14,12 +14,6 @@ STRUCT(serial_icounter_struct,
+ STRUCT(sockaddr,
+        TYPE_SHORT, MK_ARRAY(TYPE_CHAR, 14))
+ 
+-STRUCT(timeval,
+-       MK_ARRAY(TYPE_LONG, 2))
+-
+-STRUCT(timespec,
+-       MK_ARRAY(TYPE_LONG, 2))
+-
+ STRUCT(rtentry,
+        TYPE_ULONG, MK_STRUCT(STRUCT_sockaddr), MK_STRUCT(STRUCT_sockaddr), MK_STRUCT(STRUCT_sockaddr),
+        TYPE_SHORT, TYPE_SHORT, TYPE_ULONG, TYPE_PTRVOID, TYPE_SHORT, TYPE_PTRVOID,
diff --git a/buildroot/package/qemu/3.1.1.1/0003-util-cacheinfo-fix-crash-when-compiling-with-uClibc.patch b/buildroot/package/qemu/3.1.1.1/0003-util-cacheinfo-fix-crash-when-compiling-with-uClibc.patch
new file mode 100644
index 000000000..d1b9e3570
--- /dev/null
+++ b/buildroot/package/qemu/3.1.1.1/0003-util-cacheinfo-fix-crash-when-compiling-with-uClibc.patch
@@ -0,0 +1,43 @@
+From d82b8540ecaf3cb09a033e4971d8645d3343211e Mon Sep 17 00:00:00 2001
+From: Carlos Santos 
+Date: Wed, 16 Oct 2019 22:27:30 -0300
+Subject: [PATCH] util/cacheinfo: fix crash when compiling with uClibc
+
+uClibc defines _SC_LEVEL1_ICACHE_LINESIZE and _SC_LEVEL1_DCACHE_LINESIZE
+but the corresponding sysconf calls returns -1, which is a valid result,
+meaning that the limit is indeterminate.
+
+Handle this situation using the fallback values instead of crashing due
+to an assertion failure.
+
+Signed-off-by: Carlos Santos 
+---
+ util/cacheinfo.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/util/cacheinfo.c b/util/cacheinfo.c
+index ea6f3e99bf..d94dc6adc8 100644
+--- a/util/cacheinfo.c
++++ b/util/cacheinfo.c
+@@ -93,10 +93,16 @@ static void sys_cache_info(int *isize, int *dsize)
+ static void sys_cache_info(int *isize, int *dsize)
+ {
+ # ifdef _SC_LEVEL1_ICACHE_LINESIZE
+-    *isize = sysconf(_SC_LEVEL1_ICACHE_LINESIZE);
++    int tmp_isize = (int) sysconf(_SC_LEVEL1_ICACHE_LINESIZE);
++    if (tmp_isize > 0) {
++        *isize = tmp_isize;
++    }
+ # endif
+ # ifdef _SC_LEVEL1_DCACHE_LINESIZE
+-    *dsize = sysconf(_SC_LEVEL1_DCACHE_LINESIZE);
++    int tmp_dsize = (int) sysconf(_SC_LEVEL1_DCACHE_LINESIZE);
++    if (tmp_dsize > 0) {
++        *dsize = tmp_dsize;
++    }
+ # endif
+ }
+ #endif /* sys_cache_info */
+-- 
+2.18.1
+
diff --git a/buildroot/package/qemu/3.1.1.1/0004-linux-user-assume-__NR_gettid-always-exists.patch b/buildroot/package/qemu/3.1.1.1/0004-linux-user-assume-__NR_gettid-always-exists.patch
new file mode 100644
index 000000000..3475ad5b1
--- /dev/null
+++ b/buildroot/package/qemu/3.1.1.1/0004-linux-user-assume-__NR_gettid-always-exists.patch
@@ -0,0 +1,44 @@
+From 184943d827ce09375284e6fbb9fd5eeb9e369529 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Daniel=20P=2E=20Berrang=C3=A9?= 
+Date: Wed, 20 Mar 2019 16:18:41 +0000
+Subject: [PATCH] linux-user: assume __NR_gettid always exists
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The gettid syscall was introduced in Linux 2.4.11. This is old enough
+that we can assume it always exists and thus not bother with the
+conditional backcompat logic.
+
+Signed-off-by: Daniel P. Berrangé 
+Reviewed-by: Richard Henderson 
+Reviewed-by: Laurent Vivier 
+Message-Id: <20190320161842.13908-2-berrange@redhat.com>
+Signed-off-by: Laurent Vivier 
+---
+ linux-user/syscall.c | 8 --------
+ 1 file changed, 8 deletions(-)
+
+diff --git a/linux-user/syscall.c b/linux-user/syscall.c
+index 208fd1813d..11729f382c 100644
+--- a/linux-user/syscall.c
++++ b/linux-user/syscall.c
+@@ -249,15 +249,7 @@ static type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,	\
+ #define TARGET_NR__llseek TARGET_NR_llseek
+ #endif
+ 
+-#ifdef __NR_gettid
+ _syscall0(int, gettid)
+-#else
+-/* This is a replacement for the host gettid() and must return a host
+-   errno. */
+-static int gettid(void) {
+-    return -ENOSYS;
+-}
+-#endif
+ 
+ /* For the 64-bit guest on 32-bit host case we must emulate
+  * getdents using getdents64, because otherwise the host
+-- 
+2.23.0
+
diff --git a/buildroot/package/qemu/3.1.1.1/0005-linux-user-rename-gettid-to-sys_gettid-to-avoid-clas.patch b/buildroot/package/qemu/3.1.1.1/0005-linux-user-rename-gettid-to-sys_gettid-to-avoid-clas.patch
new file mode 100644
index 000000000..8e49bc0c9
--- /dev/null
+++ b/buildroot/package/qemu/3.1.1.1/0005-linux-user-rename-gettid-to-sys_gettid-to-avoid-clas.patch
@@ -0,0 +1,91 @@
+From 71ba74f67eaca21b0cc9d96f534ad3b9a7161400 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Daniel=20P=2E=20Berrang=C3=A9?= 
+Date: Wed, 20 Mar 2019 16:18:42 +0000
+Subject: [PATCH] linux-user: rename gettid() to sys_gettid() to avoid clash
+ with glibc
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The glibc-2.29.9000-6.fc31.x86_64 package finally includes the gettid()
+function as part of unistd.h when __USE_GNU is defined. This clashes
+with linux-user code which unconditionally defines this function name
+itself.
+
+/home/berrange/src/virt/qemu/linux-user/syscall.c:253:16: error: static declaration of ‘gettid’ follows non-static declaration
+  253 | _syscall0(int, gettid)
+      |                ^~~~~~
+/home/berrange/src/virt/qemu/linux-user/syscall.c:184:13: note: in definition of macro ‘_syscall0’
+  184 | static type name (void)   \
+      |             ^~~~
+In file included from /usr/include/unistd.h:1170,
+                 from /home/berrange/src/virt/qemu/include/qemu/osdep.h:107,
+                 from /home/berrange/src/virt/qemu/linux-user/syscall.c:20:
+/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
+   34 | extern __pid_t gettid (void) __THROW;
+      |                ^~~~~~
+  CC      aarch64-linux-user/linux-user/signal.o
+make[1]: *** [/home/berrange/src/virt/qemu/rules.mak:69: linux-user/syscall.o] Error 1
+make[1]: *** Waiting for unfinished jobs....
+make: *** [Makefile:449: subdir-aarch64-linux-user] Error 2
+
+While we could make our definition conditional and rely on glibc's impl,
+this patch simply renames our definition to sys_gettid() which is a
+common pattern in this file.
+
+Signed-off-by: Daniel P. Berrangé 
+Reviewed-by: Richard Henderson 
+Reviewed-by: Laurent Vivier 
+Message-Id: <20190320161842.13908-3-berrange@redhat.com>
+Signed-off-by: Laurent Vivier 
+---
+ linux-user/syscall.c | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/linux-user/syscall.c b/linux-user/syscall.c
+index 11729f382c..96cd4bf86d 100644
+--- a/linux-user/syscall.c
++++ b/linux-user/syscall.c
+@@ -249,7 +249,8 @@ static type name (type1 arg1,type2 arg2,type3 arg3,type4 arg4,type5 arg5,	\
+ #define TARGET_NR__llseek TARGET_NR_llseek
+ #endif
+ 
+-_syscall0(int, gettid)
++#define __NR_sys_gettid __NR_gettid
++_syscall0(int, sys_gettid)
+ 
+ /* For the 64-bit guest on 32-bit host case we must emulate
+  * getdents using getdents64, because otherwise the host
+@@ -5434,7 +5435,7 @@ static void *clone_func(void *arg)
+     cpu = ENV_GET_CPU(env);
+     thread_cpu = cpu;
+     ts = (TaskState *)cpu->opaque;
+-    info->tid = gettid();
++    info->tid = sys_gettid();
+     task_settid(ts);
+     if (info->child_tidptr)
+         put_user_u32(info->tid, info->child_tidptr);
+@@ -5579,9 +5580,9 @@ static int do_fork(CPUArchState *env, unsigned int flags, abi_ulong newsp,
+                mapping.  We can't repeat the spinlock hack used above because
+                the child process gets its own copy of the lock.  */
+             if (flags & CLONE_CHILD_SETTID)
+-                put_user_u32(gettid(), child_tidptr);
++                put_user_u32(sys_gettid(), child_tidptr);
+             if (flags & CLONE_PARENT_SETTID)
+-                put_user_u32(gettid(), parent_tidptr);
++                put_user_u32(sys_gettid(), parent_tidptr);
+             ts = (TaskState *)cpu->opaque;
+             if (flags & CLONE_SETTLS)
+                 cpu_set_tls (env, newtls);
+@@ -10621,7 +10622,7 @@ static abi_long do_syscall1(void *cpu_env, int num, abi_long arg1,
+         return TARGET_PAGE_SIZE;
+ #endif
+     case TARGET_NR_gettid:
+-        return get_errno(gettid());
++        return get_errno(sys_gettid());
+ #ifdef TARGET_NR_readahead
+     case TARGET_NR_readahead:
+ #if TARGET_ABI_BITS == 32
+-- 
+2.23.0
+
diff --git a/buildroot/package/qemu/qemu.hash b/buildroot/package/qemu/qemu.hash
index 338d2ae50..ada80bf61 100644
--- a/buildroot/package/qemu/qemu.hash
+++ b/buildroot/package/qemu/qemu.hash
@@ -1,4 +1,4 @@
 # Locally computed, tarball verified with GPG signature
-sha256 6a0508df079a0a33c2487ca936a56c12122f105b8a96a44374704bef6c69abfc  qemu-3.1.0.tar.xz
+sha256 b148fc3c7382c5addd915db433383160ca7b840bc6ea90bb0d35c6b253526d56  qemu-3.1.1.1.tar.xz
 sha256 6f04ae8364d0079a192b14635f4b1da294ce18724c034c39a6a41d1b09df6100  COPYING
 sha256 48ffe9fc7f1d5462dbd19340bc4dd1d8a9e37c61ed535813e614cbe4a5f0d4df  COPYING.LIB
diff --git a/buildroot/package/qemu/qemu.mk b/buildroot/package/qemu/qemu.mk
index b858efe3f..6960b8ab5 100644
--- a/buildroot/package/qemu/qemu.mk
+++ b/buildroot/package/qemu/qemu.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-QEMU_VERSION = 3.1.0
+QEMU_VERSION = 3.1.1.1
 QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.xz
 QEMU_SITE = http://download.qemu.org
 QEMU_LICENSE = GPL-2.0, LGPL-2.1, MIT, BSD-3-Clause, BSD-2-Clause, Others/BSD-1c
@@ -257,8 +257,11 @@ HOST_QEMU_OPTS += --enable-vde
 HOST_QEMU_DEPENDENCIES += host-vde2
 endif
 
-ifdef ($(BR2_PACKAGE_HOST_QEMU_VIRTFS),y)
+ifeq ($(BR2_PACKAGE_HOST_QEMU_VIRTFS),y)
 HOST_QEMU_OPTS += --enable-virtfs
+HOST_QEMU_DEPENDENCIES += host-libcap
+else
+HOST_QEMU_OPTS += --disable-virtfs
 endif
 
 # Override CPP, as it expects to be able to call it like it'd
diff --git a/buildroot/package/qpdf/Config.in b/buildroot/package/qpdf/Config.in
index 87a3192c5..3a4fa6072 100644
--- a/buildroot/package/qpdf/Config.in
+++ b/buildroot/package/qpdf/Config.in
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QPDF
 	bool "qpdf"
 	depends on BR2_INSTALL_LIBSTDCPP
-	select BR2_PACKAGE_PCRE
 	select BR2_PACKAGE_ZLIB
 	select BR2_PACKAGE_JPEG
 	help
diff --git a/buildroot/package/qpdf/qpdf.hash b/buildroot/package/qpdf/qpdf.hash
index 4bf2d3b30..610930672 100644
--- a/buildroot/package/qpdf/qpdf.hash
+++ b/buildroot/package/qpdf/qpdf.hash
@@ -1,4 +1,5 @@
 # From https://sourceforge.net/projects/qpdf/files/qpdf/8.2.1/qpdf-8.2.1.sha512/download
 sha512	ef3aeb4a7ca3ec48ab62341533eedcb2a6d0985767317ab72c22f0c0ecfef6849bfdc34b1bcec6427c7bde166143adb409c895ff40d8be6628e6323e27697a8c  qpdf-8.2.1.tar.gz
 # Locally computed:
+sha256  cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30  LICENSE.txt
 sha256  fb929ac30decb4dc3a2eea2bec6c43296a797c5d2d602deb3784ee39430583d5  Artistic-2.0
diff --git a/buildroot/package/qpdf/qpdf.mk b/buildroot/package/qpdf/qpdf.mk
index 2f6efdd73..db46b99a1 100644
--- a/buildroot/package/qpdf/qpdf.mk
+++ b/buildroot/package/qpdf/qpdf.mk
@@ -7,9 +7,9 @@
 QPDF_VERSION = 8.2.1
 QPDF_SITE = http://downloads.sourceforge.net/project/qpdf/qpdf/$(QPDF_VERSION)
 QPDF_INSTALL_STAGING = YES
-QPDF_LICENSE = Artistic-2.0
-QPDF_LICENSE_FILES = Artistic-2.0
-QPDF_DEPENDENCIES = pcre zlib jpeg
+QPDF_LICENSE = Apache-2.0 or Artistic-2.0
+QPDF_LICENSE_FILES = LICENSE.txt Artistic-2.0
+QPDF_DEPENDENCIES = zlib jpeg
 
 QPDF_CONF_OPTS = --without-random
 
diff --git a/buildroot/package/qt-webkit-kiosk/Config.in b/buildroot/package/qt-webkit-kiosk/Config.in
index 71b4f8346..13ed9bd22 100644
--- a/buildroot/package/qt-webkit-kiosk/Config.in
+++ b/buildroot/package/qt-webkit-kiosk/Config.in
@@ -15,6 +15,8 @@ config BR2_PACKAGE_QT_WEBKIT_KIOSK
 	help
 	  Simple kiosk-mode browser powered by Qt5Webkit
 
+	  https://github.com/sergey-dryabzhinsky/qt-webkit-kiosk
+
 if BR2_PACKAGE_QT_WEBKIT_KIOSK
 
 config BR2_PACKAGE_QT_WEBKIT_KIOSK_SOUNDS
diff --git a/buildroot/package/qt5/qt5.mk b/buildroot/package/qt5/qt5.mk
index 88ba1958d..c8c07a988 100644
--- a/buildroot/package/qt5/qt5.mk
+++ b/buildroot/package/qt5/qt5.mk
@@ -13,7 +13,7 @@ QT5_VERSION_MAJOR = 5.6
 QT5_VERSION = $(QT5_VERSION_MAJOR).3
 QT5_SOURCE_TARBALL_PREFIX = opensource-src
 endif
-QT5_SITE = https://download.qt.io/official_releases/qt/$(QT5_VERSION_MAJOR)/$(QT5_VERSION)/submodules
+QT5_SITE = https://download.qt.io/archive/qt/$(QT5_VERSION_MAJOR)/$(QT5_VERSION)/submodules
 
 include $(sort $(wildcard package/qt5/*/*.mk))
 
diff --git a/buildroot/package/qt5/qt5base/5.11.3/0006-Fix-compile-issue-with-gcc-9.patch b/buildroot/package/qt5/qt5base/5.11.3/0006-Fix-compile-issue-with-gcc-9.patch
new file mode 100644
index 000000000..0a5507456
--- /dev/null
+++ b/buildroot/package/qt5/qt5base/5.11.3/0006-Fix-compile-issue-with-gcc-9.patch
@@ -0,0 +1,32 @@
+From e094806951ff7337b5b0c534db479e3808f153a7 Mon Sep 17 00:00:00 2001
+From: Allan Sandfeld Jensen 
+Date: Tue, 13 Nov 2018 16:00:23 +0100
+Subject: [PATCH] Fix compile issue with gcc 9
+
+It appears messenne_twisters in the latest libstdc++ has one more
+requirement before it is willing to construct with our
+SystemGenerator struct as an sseq provider.
+
+Change-Id: If38151d1fa6f40a80274acc26d9ed6b4ac6049fe
+Reviewed-by: Giuseppe D'Angelo 
+Reviewed-by: Thiago Macieira 
+Signed-off-by: Julien Beraud 
+---
+ src/corelib/global/qrandom.cpp | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/corelib/global/qrandom.cpp b/src/corelib/global/qrandom.cpp
+index ebf9864b15..577736a867 100644
+--- a/src/corelib/global/qrandom.cpp
++++ b/src/corelib/global/qrandom.cpp
+@@ -218,6 +218,7 @@ struct QRandomGenerator::SystemGenerator
+ #endif // Q_OS_WINRT
+ 
+     static SystemGenerator &self();
++    typedef quint32 result_type;
+     void generate(quint32 *begin, quint32 *end) Q_DECL_NOEXCEPT_EXPR(FillBufferNoexcept);
+ 
+     // For std::mersenne_twister_engine implementations that use something
+-- 
+2.23.0
+
diff --git a/buildroot/package/qt5/qt5base/5.6.3/0004-fix-icu-build-for-qt5webkit.patch b/buildroot/package/qt5/qt5base/5.6.3/0004-fix-icu-build-for-qt5webkit.patch
new file mode 100644
index 000000000..0d166b848
--- /dev/null
+++ b/buildroot/package/qt5/qt5base/5.6.3/0004-fix-icu-build-for-qt5webkit.patch
@@ -0,0 +1,74 @@
+From: Arfrever Frehtes Taifersar Arahesis 
+Date: Mon, 23 Nov 2015 03:54:00 +0000
+Subject: [PATCH 1/1] When UChar is defined as char16_t in ICU, then qtbase fails to detect ICU.
+
+Build fails with following error:
+
+ICU auto-detection... ()
+x86_64-pc-linux-gnu-g++ -c -march=core2 -O2 -fno-ident \
+ -frecord-gcc-switches -pipe -Wall -O2 -Wall -W -fPIC  -I. \
+ -I/var/tmp/portage/dev-qt/qtcore-5.5.1/work/qtbase-opensource-src-5.5.1/mkspecs/linux-g++ -o icu.o icu.cpp
+In file included from /usr/include/unicode/utypes.h:36:0,
+                 from icu.cpp:34:
+/usr/include/unicode/umachine.h:306:13: error: 'char16_t' does not name a type
+     typedef char16_t UChar;
+             ^
+In file included from /usr/include/unicode/utypes.h:37:0,
+                 from icu.cpp:34:
+/usr/include/unicode/uversion.h:165:55: error: 'UChar' does not name a type
+ u_versionFromUString(UVersionInfo versionArray, const UChar *versionString);
+                                                       ^
+...
+Makefile:177: recipe for target 'icu.o' failed
+gmake: *** [icu.o] Error 1
+ICU disabled.
+The ICU library support cannot be enabled.
+
+This change isn't needed for new Qt versions, because c++11 is mandatory since 5.7.
+Upstream desided not to merge this change into old branches, like 5.6.
+Original patch was slightly modified to apply cleanly on Qt 5.6.3.
+
+Fetch from: https://bugreports.qt.io/secure/attachment/52478/qtbase-5.5.1-icu.patch
+Signed-off-by: Arfrever Frehtes Taifersar Arahesis 
+Signed-off-by: Andrey Skvortsov 
+
+---
+diff -purN qt5base-5.6.3.orig/config.tests/unix/compile.test qt5base-5.6.3/config.tests/unix/compile.test
+--- qt5base-5.6.3.orig/config.tests/unix/compile.test	2019-08-11 00:35:33.181545706 +0300
++++ qt5base-5.6.3/config.tests/unix/compile.test	2017-09-06 15:13:54.000000000 +0300
+@@ -47,7 +47,7 @@ while [ "$#" -gt 0 ]; do
+         INC=`echo $PARAM | sed -e 's/^-I//'`
+         INCLUDEPATH="$INCLUDEPATH \"$INC\""
+         ;;
+-    -f*|-D*)
++    -f*|-D*|-std=*)
+         CFLAGS="$CFLAGS \"$PARAM\""
+         CXXFLAGS="$CXXFLAGS \"$PARAM\""
+         ;;
+diff -purN qt5base-5.6.3.orig/configure qt5base-5.6.3/configure
+--- qt5base-5.6.3.orig/configure	2019-08-11 00:57:45.488214036 +0300
++++ qt5base-5.6.3/configure	2017-09-06 15:13:54.000000000 +0300
+@@ -5183,8 +5183,10 @@ fi
+ 
+ # auto-detect libicu support
+ if [ "$CFG_ICU" != "no" ]; then
+-    if compileTest unix/icu "ICU"; then
++    QT_CXXFLAGS_ICU=`icu-config --cxxflags 2>/dev/null`
++    if compileTest unix/icu "ICU" $QT_CXXFLAGS_ICU; then
+         [ "$CFG_ICU" = "auto" ] && CFG_ICU=yes
++        QMakeVar set QT_CXXFLAGS_ICU "$QT_CXXFLAGS_ICU"
+     else
+         if [ "$CFG_ICU" = "auto" ]; then
+             CFG_ICU=no
+diff -purN qt5base-5.6.3.orig/doc/Makefile qt5base-5.6.3/doc/Makefile
+diff -purN qt5base-5.6.3.orig/src/corelib/tools/tools.pri qt5base-5.6.3/src/corelib/tools/tools.pri
+--- qt5base-5.6.3.orig/src/corelib/tools/tools.pri	2019-08-11 00:45:45.073818635 +0300
++++ qt5base-5.6.3/src/corelib/tools/tools.pri	2017-09-06 15:13:54.000000000 +0300
+@@ -169,6 +169,7 @@ contains(QT_CONFIG,icu) {
+                tools/qcollator_icu.cpp \
+                tools/qtimezoneprivate_icu.cpp
+     DEFINES += QT_USE_ICU
++    QMAKE_CXXFLAGS += $$QT_CXXFLAGS_ICU
+ } else: win32 {
+     SOURCES += tools/qcollator_win.cpp
+ } else: macx {
diff --git a/buildroot/package/qt5/qt5base/qmake.conf.in b/buildroot/package/qt5/qt5base/qmake.conf.in
index f14527aa7..2eb564e17 100644
--- a/buildroot/package/qt5/qt5base/qmake.conf.in
+++ b/buildroot/package/qt5/qt5base/qmake.conf.in
@@ -15,7 +15,10 @@ QMAKE_CXX               = $${CROSS_COMPILE}g++
 # modifications to gcc-base.conf
 QMAKE_CFLAGS           += $${BR_COMPILER_CFLAGS}
 QMAKE_CXXFLAGS         += $${BR_COMPILER_CXXFLAGS}
-QMAKE_CXXFLAGS_RELEASE += -O3
+QMAKE_CFLAGS_OPTIMIZE       =
+QMAKE_CFLAGS_OPTIMIZE_DEBUG =
+QMAKE_CFLAGS_OPTIMIZE_FULL  =
+QMAKE_CFLAGS_OPTIMIZE_SIZE  =
 CONFIG                 += nostrip
 
 QMAKE_LIBS             += -lrt -lpthread -ldl
diff --git a/buildroot/package/qt5/qt5base/qt5base.mk b/buildroot/package/qt5/qt5base/qt5base.mk
index 1c20b67e4..da1a11b26 100644
--- a/buildroot/package/qt5/qt5base/qt5base.mk
+++ b/buildroot/package/qt5/qt5base/qt5base.mk
@@ -27,6 +27,13 @@ QT5BASE_CONFIGURE_OPTS += \
 	-no-pch \
 	-shared
 
+# starting from version 5.9.0, -optimize-debug is enabled by default
+# for debug builds and it overrides -O* with -Og which is not what we
+# want.
+ifeq ($(BR2_PACKAGE_QT5_VERSION_LATEST),y)
+QT5BASE_CONFIGURE_OPTS += -no-optimize-debug
+endif
+
 ifeq ($(BR2_PACKAGE_QT5_VERSION_5_6),y)
 QT5BASE_DEPENDENCIES += pcre
 else
diff --git a/buildroot/package/qt5/qt5enginio/Config.in b/buildroot/package/qt5/qt5enginio/Config.in
index ac2d13b3a..f84d23477 100644
--- a/buildroot/package/qt5/qt5enginio/Config.in
+++ b/buildroot/package/qt5/qt5enginio/Config.in
@@ -1,8 +1,8 @@
 config BR2_PACKAGE_QT5ENGINIO
 	bool "qt5enginio"
+	depends on BR2_PACKAGE_QT5BASE_OPENSSL
 	select BR2_PACKAGE_QT5BASE_GUI
 	select BR2_PACKAGE_QT5BASE_NETWORK
-	select BR2_PACKAGE_OPENSSL
 	help
 	  Qt is a cross-platform application and UI framework for
 	  developers using C++.
@@ -15,9 +15,12 @@ config BR2_PACKAGE_QT5ENGINIO
 
 	  http://doc.qt.io/archives/qt-5.5/enginio-index.html
 
-# Forcibly selecting libressl is not possible because it is from a choice, and
-# depending on it is also not possible because we select openssl. So just a
-# a warning.
-comment "qt5enginio needs libressl for Qt5.6"
+# When Qt 5.6 is removed, replace the depends on
+# BR2_PACKAGE_QT5BASE_OPENSSL above by a select BR2_PACKAGE_OPENSSL.
+comment "qt5enginio needs libressl"
 	depends on BR2_PACKAGE_QT5_VERSION_5_6
-	depends on !BR2_PACKAGE_LIBRESSL
+	depends on !BR2_PACKAGE_QT5BASE_OPENSSL
+
+comment "qt5enginio needs openssl"
+	depends on BR2_PACKAGE_QT5_VERSION_LATEST
+	depends on !BR2_PACKAGE_QT5BASE_OPENSSL
diff --git a/buildroot/package/qt5/qt5virtualkeyboard/Config.in b/buildroot/package/qt5/qt5virtualkeyboard/Config.in
index 3a60c2733..8e9cacd3c 100644
--- a/buildroot/package/qt5/qt5virtualkeyboard/Config.in
+++ b/buildroot/package/qt5/qt5virtualkeyboard/Config.in
@@ -14,6 +14,8 @@ config BR2_PACKAGE_QT5VIRTUALKEYBOARD
 	  consists of a C++ backend supporting custom input methods as
 	  well as a UI frontend implemented in QML.
 
+	  https://doc.qt.io/qt-5/qtvirtualkeyboard-index.html
+
 if BR2_PACKAGE_QT5VIRTUALKEYBOARD
 
 config BR2_PACKAGE_QT5VIRTUALKEYBOARD_LANGUAGE_LAYOUTS
diff --git a/buildroot/package/quagga/quagga.mk b/buildroot/package/quagga/quagga.mk
index 420d72c79..ef18c42a8 100644
--- a/buildroot/package/quagga/quagga.mk
+++ b/buildroot/package/quagga/quagga.mk
@@ -18,6 +18,11 @@ QUAGGA_CONF_OPTS = \
 	--sysconfdir=/etc/quagga \
 	--localstatedir=/var/run/quagga
 
+# quagga has its own internal copy of getopt_long. To avoid conflicts with libc's
+# getopt, we need to make sure that the getopt function itself is also built.
+QUAGGA_CONF_ENV = \
+	CFLAGS="$(TARGET_CFLAGS) -DREALLY_NEED_PLAIN_GETOPT"
+
 ifeq ($(BR2_PACKAGE_LIBCAP),y)
 QUAGGA_CONF_OPTS += --enable-capabilities
 QUAGGA_DEPENDENCIES += libcap
@@ -58,6 +63,16 @@ define QUAGGA_PERMISSIONS
 	/etc/quagga d 755 quagga quagga - - - - -
 endef
 
+# In order for the QUAGGA_PERMISSIONS variable above to work,
+# /etc/quagga has to exist. However, this package without any
+# sub-option enabled will not create /etc/quagga, so let's create it
+# unconditionally in a post-install hook, in case it hasn't been
+# already created by the quagga installation.
+define QUAGGA_CREATE_ETC_QUAGGA
+	mkdir -p $(TARGET_DIR)/etc/quagga
+endef
+QUAGGA_POST_INSTALL_TARGET_HOOKS += QUAGGA_CREATE_ETC_QUAGGA
+
 ifeq ($(BR2_PACKAGE_QUAGGA_NHRPD),y)
 QUAGGA_CONF_OPTS += --enable-nhrpd
 QUAGGA_DEPENDENCIES += c-ares
diff --git a/buildroot/package/rabbitmq-c/rabbitmq-c.hash b/buildroot/package/rabbitmq-c/rabbitmq-c.hash
index 0af88774e..eb5762651 100644
--- a/buildroot/package/rabbitmq-c/rabbitmq-c.hash
+++ b/buildroot/package/rabbitmq-c/rabbitmq-c.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 316c0d156452b488124806911a62e0c2aa8a546d38fc8324719cd29aaa493024 rabbitmq-c-v0.9.0.tar.gz
+sha256 6455efbaebad8891c59f274a852b75b5cc51f4d669dfc78d2ae7e6cc97fcd8c0 rabbitmq-c-0.10.0.tar.gz
 sha256 94a12c906acb31a66c2c8a6c1b6e46cab52bc5694c5ada2a06d86b05d3d3f422 LICENSE-MIT
diff --git a/buildroot/package/rabbitmq-c/rabbitmq-c.mk b/buildroot/package/rabbitmq-c/rabbitmq-c.mk
index 6385ccb6b..e059ff706 100644
--- a/buildroot/package/rabbitmq-c/rabbitmq-c.mk
+++ b/buildroot/package/rabbitmq-c/rabbitmq-c.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-RABBITMQ_C_VERSION = v0.9.0
-RABBITMQ_C_SITE = $(call github,alanxz,rabbitmq-c,$(RABBITMQ_C_VERSION))
+RABBITMQ_C_VERSION = 0.10.0
+RABBITMQ_C_SITE = $(call github,alanxz,rabbitmq-c,v$(RABBITMQ_C_VERSION))
 RABBITMQ_C_LICENSE = MIT
 RABBITMQ_C_LICENSE_FILES = LICENSE-MIT
 RABBITMQ_C_INSTALL_STAGING = YES
diff --git a/buildroot/package/rauc/Config.in b/buildroot/package/rauc/Config.in
index 456f8f382..5091dc72a 100644
--- a/buildroot/package/rauc/Config.in
+++ b/buildroot/package/rauc/Config.in
@@ -7,6 +7,8 @@ config BR2_PACKAGE_RAUC
 	select BR2_PACKAGE_OPENSSL
 	select BR2_PACKAGE_DBUS # run-time dependency
 	select BR2_PACKAGE_SQUASHFS # run-time dependency
+	select BR2_PACKAGE_UBOOT_TOOLS if BR2_TARGET_UBOOT # run-time dependency
+	select BR2_PACKAGE_UBOOT_TOOLS_FWPRINTENV if BR2_TARGET_UBOOT
 	help
 	  RAUC is the Robust Auto-Update Controller developed by
 	  Pengutronix. It supports updating embedded Linux
diff --git a/buildroot/package/redis/redis.hash b/buildroot/package/redis/redis.hash
index 0b4e25c61..59c16e12e 100644
--- a/buildroot/package/redis/redis.hash
+++ b/buildroot/package/redis/redis.hash
@@ -1,5 +1,5 @@
 # From https://github.com/antirez/redis-hashes/blob/master/README
-sha256 fc53e73ae7586bcdacb4b63875d1ff04f68c5474c1ddeda78f00e5ae2eed1bbb  redis-4.0.11.tar.gz
+sha256 1e1e18420a86cfb285933123b04a82e1ebda20bfb0a289472745a087587e93a7  redis-4.0.14.tar.gz
 
 # Locally calculated
 sha256 cbf420a3672475a6e2765e3c0984c1f81efe0212afb94a3c998ee63bfd661063  COPYING
diff --git a/buildroot/package/redis/redis.mk b/buildroot/package/redis/redis.mk
index da2307d69..783f2c5c4 100644
--- a/buildroot/package/redis/redis.mk
+++ b/buildroot/package/redis/redis.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-REDIS_VERSION = 4.0.11
+REDIS_VERSION = 4.0.14
 REDIS_SITE = http://download.redis.io/releases
 REDIS_LICENSE = BSD-3-Clause (core); MIT and BSD family licenses (Bundled components)
 REDIS_LICENSE_FILES = COPYING
diff --git a/buildroot/package/rpcbind/Config.in b/buildroot/package/rpcbind/Config.in
index ced2d4094..9cde7bba3 100644
--- a/buildroot/package/rpcbind/Config.in
+++ b/buildroot/package/rpcbind/Config.in
@@ -9,6 +9,8 @@ config BR2_PACKAGE_RPCBIND
 	  The rpcbind utility is a server that converts RPC program
 	  numbers into universal addresses.
 
+	  https://sourceforge.net/projects/rpcbind/
+
 comment "rpcbind needs a toolchain w/ threads"
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU
diff --git a/buildroot/package/rpcbind/rpcbind.mk b/buildroot/package/rpcbind/rpcbind.mk
index 5c216afc9..d69735d32 100644
--- a/buildroot/package/rpcbind/rpcbind.mk
+++ b/buildroot/package/rpcbind/rpcbind.mk
@@ -17,6 +17,7 @@ RPCBIND_CONF_OPTS += --with-rpcuser=root
 
 ifeq ($(BR2_INIT_SYSTEMD),y)
 RPCBIND_CONF_OPTS += --with-systemdsystemunitdir=/usr/lib/systemd/system
+RPCBIND_DEPENDENCIES += systemd
 else
 RPCBIND_CONF_OPTS += --with-systemdsystemunitdir=no
 endif
diff --git a/buildroot/package/rpi-firmware/rpi-firmware.hash b/buildroot/package/rpi-firmware/rpi-firmware.hash
index d4c69b081..c06031d16 100644
--- a/buildroot/package/rpi-firmware/rpi-firmware.hash
+++ b/buildroot/package/rpi-firmware/rpi-firmware.hash
@@ -1,2 +1,2 @@
 # Locally computed
-sha256	25d5cdeb0cf37499f8b6ca85c43a5ccaa0be55c9c33a97ceac7ba93954f890c2  rpi-firmware-0b0ec99a776f30c5b9f80e5447e9e8fecb80f71a.tar.gz
+sha256	088d094618924a90f65bb511808bbeb921e0769c878fa7baa9626954206f61a2  rpi-firmware-62a0d75b67484cb306a2a6f8fa954d9644868169.tar.gz
diff --git a/buildroot/package/rpi-firmware/rpi-firmware.mk b/buildroot/package/rpi-firmware/rpi-firmware.mk
index c1356e4ca..fee1a7520 100644
--- a/buildroot/package/rpi-firmware/rpi-firmware.mk
+++ b/buildroot/package/rpi-firmware/rpi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = 0b0ec99a776f30c5b9f80e5447e9e8fecb80f71a
+RPI_FIRMWARE_VERSION = 62a0d75b67484cb306a2a6f8fa954d9644868169
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom
diff --git a/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash b/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
index 85bac3a61..90aa03218 100644
--- a/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
+++ b/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 0b2bbf0bcdb7eabc488cc96e418ee17efcd9803590abc64d055ea3b762e2411b  rpi-wifi-firmware-130cb86fa30cafbd575d38865fa546350d4c5f9c.tar.gz
+sha256 26e6e4aace9c9d1e9b9b1447f57ebd743dc15f3a337deac9e77d964885fcb3b3  rpi-wifi-firmware-00daf85ffa373ecce7836df7543c6ebe4cf43639.tar.gz
 sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
diff --git a/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk b/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
index 745d83965..0c697bddb 100644
--- a/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
+++ b/buildroot/package/rpi-wifi-firmware/rpi-wifi-firmware.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_WIFI_FIRMWARE_VERSION = 130cb86fa30cafbd575d38865fa546350d4c5f9c
+RPI_WIFI_FIRMWARE_VERSION = 00daf85ffa373ecce7836df7543c6ebe4cf43639
 RPI_WIFI_FIRMWARE_SITE = $(call github,RPi-Distro,firmware-nonfree,$(RPI_WIFI_FIRMWARE_VERSION))
 RPI_WIFI_FIRMWARE_LICENSE = PROPRIETARY
 RPI_WIFI_FIRMWARE_LICENSE_FILES = LICENCE.broadcom_bcm43xx
diff --git a/buildroot/package/rtl8821au/Config.in b/buildroot/package/rtl8821au/Config.in
index 9827ad5b9..87c191b22 100644
--- a/buildroot/package/rtl8821au/Config.in
+++ b/buildroot/package/rtl8821au/Config.in
@@ -7,4 +7,4 @@ config BR2_PACKAGE_RTL8821AU
 	help
 	  rtl8821au wifi driver
 
-	  https://github.com/paralin/rtl8821au
+	  https://github.com/abperiasamy/rtl8812AU_8821AU_linux
diff --git a/buildroot/package/ruby/ruby.hash b/buildroot/package/ruby/ruby.hash
index fa9eddc27..d0aac6387 100644
--- a/buildroot/package/ruby/ruby.hash
+++ b/buildroot/package/ruby/ruby.hash
@@ -1,5 +1,5 @@
-# https://www.ruby-lang.org/en/news/2019/04/01/ruby-2-4-6-released/
-sha256 25da31b9815bfa9bba9f9b793c055a40a35c43c6adfb1fdbd81a09099f9b529c  ruby-2.4.6.tar.xz
+# https://www.ruby-lang.org/en/news/2019/10/02/ruby-2-4-9-released/
+sha256 0c4e000253ef7187feeb940a01a1c7594f28d63aa16f978e892a0e2864f58614  ruby-2.4.9.tar.xz
 # License files, Locally calculated
 sha256 609292a6d848ab223073944fc2d844449391a5ba2055a8b5baf1726bc13b39cb  LEGAL
 sha256 f5eb1b2956d5f7a67b2e5722a3749bc2fe86f9c580f2e3f5a08519cf073b5864  COPYING
diff --git a/buildroot/package/ruby/ruby.mk b/buildroot/package/ruby/ruby.mk
index 10424020a..1899d1479 100644
--- a/buildroot/package/ruby/ruby.mk
+++ b/buildroot/package/ruby/ruby.mk
@@ -5,17 +5,17 @@
 ################################################################################
 
 RUBY_VERSION_MAJOR = 2.4
-RUBY_VERSION = $(RUBY_VERSION_MAJOR).6
+RUBY_VERSION = $(RUBY_VERSION_MAJOR).9
 RUBY_VERSION_EXT = 2.4.0
 RUBY_SITE = http://cache.ruby-lang.org/pub/ruby/$(RUBY_VERSION_MAJOR)
 RUBY_SOURCE = ruby-$(RUBY_VERSION).tar.xz
 RUBY_DEPENDENCIES = host-pkgconf host-ruby
-HOST_RUBY_DEPENDENCIES = host-pkgconf
+HOST_RUBY_DEPENDENCIES = host-pkgconf host-openssl
 RUBY_MAKE_ENV = $(TARGET_MAKE_ENV)
 RUBY_CONF_OPTS = --disable-install-doc --disable-rpath --disable-rubygems
 HOST_RUBY_CONF_OPTS = \
 	--disable-install-doc \
-	--with-out-ext=curses,openssl,readline \
+	--with-out-ext=curses,readline \
 	--without-gmp
 RUBY_LICENSE = Ruby or BSD-2-Clause, BSD-3-Clause, others
 RUBY_LICENSE_FILES = LEGAL COPYING BSDL
diff --git a/buildroot/package/runc/runc.hash b/buildroot/package/runc/runc.hash
index 969bb0bfb..3e8eff3cc 100644
--- a/buildroot/package/runc/runc.hash
+++ b/buildroot/package/runc/runc.hash
@@ -1,3 +1,3 @@
 # Locally computed
-sha256	efe4ff9bbe49b19074346d65c914d809c0a3e90d062ea9619fe240f931f0b700  runc-v1.0.0-rc8.tar.gz
+sha256	2ec69c25df9f02c6fd38eb287145f8afba6772f809abe01df4534b5bfd68e8d4  runc-1.0.0-rc9.tar.gz
 sha256  552a739c3b25792263f731542238b92f6f8d07e9a488eae27e6c4690038a8243  LICENSE
diff --git a/buildroot/package/runc/runc.mk b/buildroot/package/runc/runc.mk
index 31da4fae5..3432dd5fe 100644
--- a/buildroot/package/runc/runc.mk
+++ b/buildroot/package/runc/runc.mk
@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-RUNC_VERSION = v1.0.0-rc8
-RUNC_SITE = $(call github,opencontainers,runc,$(RUNC_VERSION))
+RUNC_VERSION = 1.0.0-rc9
+RUNC_SITE = $(call github,opencontainers,runc,v$(RUNC_VERSION))
 RUNC_LICENSE = Apache-2.0
 RUNC_LICENSE_FILES = LICENSE
 
diff --git a/buildroot/package/rygel/rygel.mk b/buildroot/package/rygel/rygel.mk
index 1f917b207..de5cacd12 100644
--- a/buildroot/package/rygel/rygel.mk
+++ b/buildroot/package/rygel/rygel.mk
@@ -14,11 +14,11 @@ RYGEL_DEPENDENCIES = \
 	gupnp-av \
 	libgee \
 	libmediaart \
-	sqlite
+	sqlite \
+	$(TARGET_NLS_DEPENDENCIES)
 RYGEL_INSTALL_STAGING = YES
-# We're patching configure.ac
-RYGEL_AUTORECONF = YES
 
+RYGEL_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 RYGEL_CONF_OPTS += \
 	--disable-apidocs \
 	--disable-coverage \
diff --git a/buildroot/package/safeclib/0003-Define-_GNU_SOURCE-when-needed.patch b/buildroot/package/safeclib/0003-Define-_GNU_SOURCE-when-needed.patch
new file mode 100644
index 000000000..cc9e58079
--- /dev/null
+++ b/buildroot/package/safeclib/0003-Define-_GNU_SOURCE-when-needed.patch
@@ -0,0 +1,115 @@
+From 94c7b765202fe50894425364834beca79e52b255 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Mon, 28 Oct 2019 17:09:43 +0100
+Subject: [PATCH] Define _GNU_SOURCE when needed
+
+Define _GNU_SOURCE to fix build with musl otherwise we'll got the
+following build failures due to localtime_r, strnlen, gmtime_r and
+asctime_r being undefined:
+
+os/localtime_s.c:124:12: error: implicit declaration of function 'localtime_r'; did you mean 'localtime_s'? [-Werror=implicit-function-declaration]
+     dest = localtime_r(timer, dest);
+            ^~~~~~~~~~~
+
+io/gets_s.c:144:32: error: implicit declaration of function 'strnlen'; did you mean 'strlen'? [-Werror=implicit-function-declaration]
+         rsize_t len = (rsize_t)strnlen(dest, dmax);
+                                ^~~~~~~
+                                strlen
+
+An other option would be to define AC_GNU_SOURCE in the configure.ac but
+it seems that there is some handling of _GNU_SOURCE in
+safeclib_private.h
+
+Fixes:
+ - http://autobuild.buildroot.net/results/31a4b647ec0dcd9f517f313ec6c7c8f56da1ee47
+
+Signed-off-by: Fabrice Fontaine 
+[Retrieved from:
+https://github.com/rurban/safeclib/commit/94c7b765202fe50894425364834beca79e52b255]
+---
+ src/extmem/memzero_s.c | 2 ++
+ src/io/gets_s.c        | 2 ++
+ src/os/asctime_s.c     | 2 ++
+ src/os/ctime_s.c       | 2 ++
+ src/os/gmtime_s.c      | 2 ++
+ src/os/localtime_s.c   | 2 ++
+ 6 files changed, 12 insertions(+)
+
+diff --git a/src/extmem/memzero_s.c b/src/extmem/memzero_s.c
+index 75107215..20cb2784 100644
+--- a/src/extmem/memzero_s.c
++++ b/src/extmem/memzero_s.c
+@@ -31,6 +31,8 @@
+  *------------------------------------------------------------------
+  */
+ 
++#define _GNU_SOURCE
++
+ #ifdef FOR_DOXYGEN
+ #include "safe_mem_lib.h"
+ #else
+diff --git a/src/io/gets_s.c b/src/io/gets_s.c
+index 09350b3d..be875a1c 100644
+--- a/src/io/gets_s.c
++++ b/src/io/gets_s.c
+@@ -29,6 +29,8 @@
+  *------------------------------------------------------------------
+  */
+ 
++#define _GNU_SOURCE
++
+ #ifdef FOR_DOXYGEN
+ #include "safe_lib.h"
+ #else
+diff --git a/src/os/asctime_s.c b/src/os/asctime_s.c
+index 42669844..01cefd8f 100644
+--- a/src/os/asctime_s.c
++++ b/src/os/asctime_s.c
+@@ -29,6 +29,8 @@
+  *------------------------------------------------------------------
+  */
+ 
++#define _GNU_SOURCE
++
+ #ifdef FOR_DOXYGEN
+ #include "safe_lib.h"
+ #else
+diff --git a/src/os/ctime_s.c b/src/os/ctime_s.c
+index 01b31f63..7a1a138c 100644
+--- a/src/os/ctime_s.c
++++ b/src/os/ctime_s.c
+@@ -29,6 +29,8 @@
+  *------------------------------------------------------------------
+  */
+ 
++#define _GNU_SOURCE
++
+ #ifdef FOR_DOXYGEN
+ #include "safe_lib.h"
+ #else
+diff --git a/src/os/gmtime_s.c b/src/os/gmtime_s.c
+index ff9a0e24..cd8f064f 100644
+--- a/src/os/gmtime_s.c
++++ b/src/os/gmtime_s.c
+@@ -29,6 +29,8 @@
+  *------------------------------------------------------------------
+  */
+ 
++#define _GNU_SOURCE
++
+ #ifdef FOR_DOXYGEN
+ #include "safe_lib.h"
+ #else
+diff --git a/src/os/localtime_s.c b/src/os/localtime_s.c
+index 0ce3324b..92ea21b9 100644
+--- a/src/os/localtime_s.c
++++ b/src/os/localtime_s.c
+@@ -29,6 +29,8 @@
+  *------------------------------------------------------------------
+  */
+ 
++#define _GNU_SOURCE
++
+ #ifdef FOR_DOXYGEN
+ #include "safe_lib.h"
+ #else
diff --git a/buildroot/package/samba4/0002-Fix-compilation-of-Samba-4.7.4-with-disabled-ADS.patch b/buildroot/package/samba4/0002-Fix-compilation-of-Samba-4.7.4-with-disabled-ADS.patch
deleted file mode 100644
index 45d3050a3..000000000
--- a/buildroot/package/samba4/0002-Fix-compilation-of-Samba-4.7.4-with-disabled-ADS.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From da2f2cf8e7a1dfcb661b707e4649cec1e8a0e79c Mon Sep 17 00:00:00 2001
-From: Bernd Kuhls 
-Date: Thu, 9 Aug 2018 10:03:06 +0200
-Subject: [PATCH] Fix compilation of Samba 4.7.4 with disabled ADS
-
-Downloaded from upstream mailinglist
-https://lists.samba.org/archive/samba-technical/2017-December/124629.html
-
-Patch originates from FreeBSD:
-https://svnweb.freebsd.org/ports/head/net/samba47/files/patch-source3__libads__kerberos_keytab.c?revision=457119&view=markup
-
-Signed-off-by: Bernd Kuhls 
----
- source3/libads/kerberos_keytab.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/source3/libads/kerberos_keytab.c b/source3/libads/kerberos_keytab.c
-index 37ac7ba985e..71250962090 100644
---- a/source3/libads/kerberos_keytab.c
-+++ b/source3/libads/kerberos_keytab.c
-@@ -32,8 +32,6 @@
- 
- #ifdef HAVE_KRB5
- 
--#ifdef HAVE_ADS
--
- /* This MAX_NAME_LEN is a constant defined in krb5.h */
- #ifndef MAX_KEYTAB_NAME_LEN
- #define MAX_KEYTAB_NAME_LEN 1100
-@@ -85,6 +83,8 @@ out:
- 	return ret;
- }
- 
-+#ifdef HAVE_ADS
-+
- /**********************************************************************
-  Adds a single service principal, i.e. 'host' to the system keytab
- ***********************************************************************/
--- 
-2.14.4
-
diff --git a/buildroot/package/samba4/0003-Fix-uClibc-build-on-64bit-platforms-by-including-std.patch b/buildroot/package/samba4/0002-Fix-uClibc-build-on-64bit-platforms-by-including-std.patch
similarity index 100%
rename from buildroot/package/samba4/0003-Fix-uClibc-build-on-64bit-platforms-by-including-std.patch
rename to buildroot/package/samba4/0002-Fix-uClibc-build-on-64bit-platforms-by-including-std.patch
diff --git a/buildroot/package/samba4/0005-test_regfio.c-include-stdint.h-before-cmoka.h.patch b/buildroot/package/samba4/0003-test_regfio.c-include-stdint.h-before-cmoka.h.patch
similarity index 100%
rename from buildroot/package/samba4/0005-test_regfio.c-include-stdint.h-before-cmoka.h.patch
rename to buildroot/package/samba4/0003-test_regfio.c-include-stdint.h-before-cmoka.h.patch
diff --git a/buildroot/package/samba4/0004-Disable-build-of-manpages-and-documentation.patch b/buildroot/package/samba4/0004-Disable-build-of-manpages-and-documentation.patch
deleted file mode 100644
index ad8712634..000000000
--- a/buildroot/package/samba4/0004-Disable-build-of-manpages-and-documentation.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From 3cd608170b99492bdd5fe3b7b8e7db61af199845 Mon Sep 17 00:00:00 2001
-From: Bernd Kuhls 
-Date: Thu, 9 Aug 2018 09:59:06 +0200
-Subject: [PATCH] Disable build of manpages and documentation
-
-This patch fixes a bug described in an upstream bug report
-https://bugzilla.samba.org/show_bug.cgi?id=9515
-which was closed as WONTFIX by disabling the build of manpages and
-documentation.
-
-If installed on the host, samba4 uses the docbook-xsl package to build
-parts of the documentation. This package is broken, on Debian for
-example the bug reported to samba4 was fixed in the docbook-xsl package:
-https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=765567
-
-Since we do not provide a host version of docbook-xsl we need to disable
-the build of manpages and documentation.
-
-Patch was downloaded from
-https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/network/samba/patches/samba-950-no-man.patch
-
-[Bernd: rebased for samba-4.8.5]
-Signed-off-by: Bernd Kuhls 
----
- buildtools/wafsamba/wafsamba.py | 10 ++++-----
- docs-xml/wscript_build          | 40 ++++++++++++++++-----------------
- source4/scripting/wscript_build |  4 ++--
- 3 files changed, 27 insertions(+), 27 deletions(-)
-
-diff --git a/buildtools/wafsamba/wafsamba.py b/buildtools/wafsamba/wafsamba.py
-index 4bb19d070e2..a255d841111 100644
---- a/buildtools/wafsamba/wafsamba.py
-+++ b/buildtools/wafsamba/wafsamba.py
-@@ -335,9 +335,9 @@ def SAMBA_LIBRARY(bld, libname, source,
-         else:
-             bld.PKG_CONFIG_FILES(pc_files, vnum=vnum)
- 
--    if (manpages is not None and 'XSLTPROC_MANPAGES' in bld.env and
--        bld.env['XSLTPROC_MANPAGES']):
--        bld.MANPAGES(manpages, install)
-+#    if (manpages is not None and 'XSLTPROC_MANPAGES' in bld.env and
-+#        bld.env['XSLTPROC_MANPAGES']):
-+#        bld.MANPAGES(manpages, install)
- 
- 
- Build.BuildContext.SAMBA_LIBRARY = SAMBA_LIBRARY
-@@ -442,8 +442,8 @@ def SAMBA_BINARY(bld, binname, source,
-         samba_ldflags  = pie_ldflags
-         )
- 
--    if manpages is not None and 'XSLTPROC_MANPAGES' in bld.env and bld.env['XSLTPROC_MANPAGES']:
--        bld.MANPAGES(manpages, install)
-+#    if manpages is not None and 'XSLTPROC_MANPAGES' in bld.env and bld.env['XSLTPROC_MANPAGES']:
-+#        bld.MANPAGES(manpages, install)
- 
- Build.BuildContext.SAMBA_BINARY = SAMBA_BINARY
- 
-diff --git a/docs-xml/wscript_build b/docs-xml/wscript_build
-index ec5d28fc62a..f81c125bcd4 100644
---- a/docs-xml/wscript_build
-+++ b/docs-xml/wscript_build
-@@ -148,23 +148,23 @@ bld.SAMBA_GENERATOR(parameter_all,
-                     rule=smbdotconf_generate_parameter_list,
-                     dep_vars=bld.dynconfig_varnames())
- 
--def SMBDOTCONF_MANPAGE(bld, target):
--    ''' assemble and build smb.conf.5 manual page'''
--    bld.SAMBAMANPAGES(target, parameter_all)
--
--if ('XSLTPROC_MANPAGES' in bld.env and bld.env['XSLTPROC_MANPAGES']):
--
--    SMBDOTCONF_MANPAGE(bld, 'manpages/smb.conf.5')
--    bld.SAMBAMANPAGES(manpages)
--
--    if bld.CONFIG_SET('WITH_PAM_MODULES') and bld.CONFIG_SET('HAVE_PAM_START'):
--        bld.SAMBAMANPAGES(pam_winbind_manpages)
--
--    if bld.CONFIG_SET('HAVE_KRB5_LOCATE_PLUGIN_H'):
--        bld.SAMBAMANPAGES(krb5_locator_manpages)
--
--    if bld.CONFIG_SET('HAVE_KRB5_LOCALAUTH_PLUGIN_H'):
--        bld.SAMBAMANPAGES(krb5_localauth_manpages)
--
--    if bld.SAMBA3_IS_ENABLED_MODULE('vfs_zfsacl'):
--        bld.SAMBAMANPAGES('manpages/vfs_zfsacl.8')
-+#def SMBDOTCONF_MANPAGE(bld, target):
-+#    ''' assemble and build smb.conf.5 manual page'''
-+#    bld.SAMBAMANPAGES(target, parameter_all)
-+#
-+#if ('XSLTPROC_MANPAGES' in bld.env and bld.env['XSLTPROC_MANPAGES']):
-+#
-+#    SMBDOTCONF_MANPAGE(bld, 'manpages/smb.conf.5')
-+#    bld.SAMBAMANPAGES(manpages)
-+#
-+#    if bld.CONFIG_SET('WITH_PAM_MODULES') and bld.CONFIG_SET('HAVE_PAM_START'):
-+#        bld.SAMBAMANPAGES(pam_winbind_manpages)
-+#
-+#    if bld.CONFIG_SET('HAVE_KRB5_LOCATE_PLUGIN_H'):
-+#        bld.SAMBAMANPAGES(krb5_locator_manpages)
-+#
-+#    if bld.CONFIG_SET('HAVE_KRB5_LOCALAUTH_PLUGIN_H'):
-+#        bld.SAMBAMANPAGES(krb5_localauth_manpages)
-+#
-+#    if bld.SAMBA3_IS_ENABLED_MODULE('vfs_zfsacl'):
-+#        bld.SAMBAMANPAGES('manpages/vfs_zfsacl.8')
-diff --git a/source4/scripting/wscript_build b/source4/scripting/wscript_build
-index 2f53cce12b7..9841ae0a116 100644
---- a/source4/scripting/wscript_build
-+++ b/source4/scripting/wscript_build
-@@ -12,8 +12,8 @@ if sbin_files:
-     bld.INSTALL_FILES('${SBINDIR}',
-                       sbin_files,
-                       chmod=MODE_755, python_fixup=True, flat=True)
--    if 'XSLTPROC_MANPAGES' in bld.env and bld.env['XSLTPROC_MANPAGES']:
--        bld.MANPAGES(man_files, True)
-+#    if 'XSLTPROC_MANPAGES' in bld.env and bld.env['XSLTPROC_MANPAGES']:
-+#        bld.MANPAGES(man_files, True)
- 
- if bld.CONFIG_SET('AD_DC_BUILD_IS_ENABLED'):
-     bld.INSTALL_FILES('${BINDIR}',
--- 
-2.18.0
-
diff --git a/buildroot/package/samba4/samba4.hash b/buildroot/package/samba4/samba4.hash
index 7e82261b4..27b5551ad 100644
--- a/buildroot/package/samba4/samba4.hash
+++ b/buildroot/package/samba4/samba4.hash
@@ -1,4 +1,4 @@
 # Locally calculated after checking pgp signature
-# https://download.samba.org/pub/samba/stable/samba-4.9.8.tar.asc
-sha256 82ebb7c3f1847c39341dd97ff8b73f40fa83f5f794daeceb80f3c349ace3cf56  samba-4.9.8.tar.gz
+# https://download.samba.org/pub/samba/stable/samba-4.9.17.tar.asc
+sha256 42467af2efab4793c7988561644a84de4000e96a87ce8239362c6d10abace295  samba-4.9.17.tar.gz
 sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903  COPYING
diff --git a/buildroot/package/samba4/samba4.mk b/buildroot/package/samba4/samba4.mk
index d2f89e2c8..e15d0742e 100644
--- a/buildroot/package/samba4/samba4.mk
+++ b/buildroot/package/samba4/samba4.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SAMBA4_VERSION = 4.9.8
+SAMBA4_VERSION = 4.9.17
 SAMBA4_SITE = https://download.samba.org/pub/samba/stable
 SAMBA4_SOURCE = samba-$(SAMBA4_VERSION).tar.gz
 SAMBA4_INSTALL_STAGING = YES
@@ -21,7 +21,8 @@ SAMBA4_CFLAGS = $(TARGET_CFLAGS)
 SAMBA4_LDFLAGS = $(TARGET_LDFLAGS) $(TARGET_NLS_LIBS)
 SAMBA4_CONF_ENV = \
 	CFLAGS="$(SAMBA4_CFLAGS)" \
-	LDFLAGS="$(SAMBA4_LDFLAGS)"
+	LDFLAGS="$(SAMBA4_LDFLAGS)" \
+	XSLTPROC=false
 
 ifeq ($(BR2_PACKAGE_LIBTIRPC),y)
 SAMBA4_CFLAGS += `$(PKG_CONFIG_HOST_BINARY) --cflags libtirpc`
diff --git a/buildroot/package/sdl2/0002-fix-busy-loop-in-dlopen.patch b/buildroot/package/sdl2/0002-fix-busy-loop-in-dlopen.patch
new file mode 100644
index 000000000..e335f95b7
--- /dev/null
+++ b/buildroot/package/sdl2/0002-fix-busy-loop-in-dlopen.patch
@@ -0,0 +1,41 @@
+
+# HG changeset patch
+# User Paul Cercueil 
+# Date 1576820863 28800
+# Node ID 4f5bef55183c677d12a7da8f3392879ed50670a3
+# Parent  01f16d7f36cb9f4fa02016e57fbe915fdea71cc8
+kmsdrm: Fix busy-loop within libc's dlopen()
+For some obscure reason, the order in which the libdrm/libgbm libraries
+are loaded matters.
+
+Without this fix, the first call to check_modesetting() will work and
+load then unload all symbols properly, but the second call to this
+function will lock up as soon as dlopen() is called on libdrm.
+
+Swapping the order in which the libdrm and libgbm libraries are loaded
+is enough to fix (or work around?) this issue.
+
+Fixes #4891:
+https://bugzilla.libsdl.org/show_bug.cgi?id=4891
+
+Upstream: https://hg.libsdl.org/SDL/rev/4f5bef55183c
+
+Signed-off-by: Paul Cercueil 
+[yann.morin.1998@free.fr: add upstream commit URL]
+Signed-off-by: Yann E. MORIN 
+
+diff -r 01f16d7f36cb -r 4f5bef55183c src/video/kmsdrm/SDL_kmsdrmdyn.c
+--- a/src/video/kmsdrm/SDL_kmsdrmdyn.c	Thu Dec 19 21:45:44 2019 -0800
++++ b/src/video/kmsdrm/SDL_kmsdrmdyn.c	Thu Dec 19 21:47:43 2019 -0800
+@@ -50,8 +50,8 @@
+ #endif
+ 
+ static kmsdrmdynlib kmsdrmlibs[] = {
+-    {NULL, SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC},
+-    {NULL, SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC_GBM}
++    {NULL, SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC_GBM},
++    {NULL, SDL_VIDEO_DRIVER_KMSDRM_DYNAMIC}
+ };
+ 
+ static void *
+
diff --git a/buildroot/package/sdl_mixer/sdl_mixer.mk b/buildroot/package/sdl_mixer/sdl_mixer.mk
index 1c6912acc..9183a4aa8 100644
--- a/buildroot/package/sdl_mixer/sdl_mixer.mk
+++ b/buildroot/package/sdl_mixer/sdl_mixer.mk
@@ -10,6 +10,9 @@ SDL_MIXER_SITE = http://www.libsdl.org/projects/SDL_mixer/release
 SDL_MIXER_LICENSE = Zlib
 SDL_MIXER_LICENSE_FILES = COPYING
 
+# Package does not build in parallel due to improper make rules
+SDL_MIXER_MAKE = $(MAKE1)
+
 SDL_MIXER_INSTALL_STAGING = YES
 SDL_MIXER_DEPENDENCIES = sdl
 
diff --git a/buildroot/package/setserial/Config.in b/buildroot/package/setserial/Config.in
index 4ff2477e8..1182cb063 100644
--- a/buildroot/package/setserial/Config.in
+++ b/buildroot/package/setserial/Config.in
@@ -4,3 +4,5 @@ config BR2_PACKAGE_SETSERIAL
 	depends on BR2_USE_MMU
 	help
 	  Setserial : configuration of serial ports
+
+	  http://setserial.sourceforge.net/
diff --git a/buildroot/package/socat/socat.mk b/buildroot/package/socat/socat.mk
index 5fea067d8..e4595007d 100644
--- a/buildroot/package/socat/socat.mk
+++ b/buildroot/package/socat/socat.mk
@@ -29,6 +29,8 @@ endif
 # automake, so we can't use the normal autoreconf logic.
 
 SOCAT_DEPENDENCIES = host-autoconf
+# incompatibile license (GPL-3.0+)
+SOCAT_CONF_OPTS = --disable-readline
 
 ifeq ($(BR2_PACKAGE_OPENSSL),y)
 SOCAT_DEPENDENCIES += openssl
@@ -36,12 +38,6 @@ else
 SOCAT_CONF_OPTS += --disable-openssl
 endif
 
-ifeq ($(BR2_PACKAGE_READLINE),y)
-SOCAT_DEPENDENCIES += readline
-else
-SOCAT_CONF_OPTS += --disable-readline
-endif
-
 define SOCAT_RUN_AUTOCONF
 	(cd $(@D); $(HOST_DIR)/bin/autoconf)
 endef
diff --git a/buildroot/package/sox/sox.mk b/buildroot/package/sox/sox.mk
index 0b3dc136d..013ccbbcf 100644
--- a/buildroot/package/sox/sox.mk
+++ b/buildroot/package/sox/sox.mk
@@ -8,16 +8,14 @@ SOX_VERSION = 14.4.2
 SOX_SITE = http://downloads.sourceforge.net/project/sox/sox/$(SOX_VERSION)
 SOX_SOURCE = sox-$(SOX_VERSION).tar.bz2
 SOX_DEPENDENCIES = host-pkgconf
-SOX_CONF_OPTS = --with-distro="Buildroot" --without-ffmpeg --disable-gomp \
-	$(if $(BR2_TOOLCHAIN_HAS_SSP),,--disable-stack-protector)
 SOX_LICENSE = GPL-2.0+ (sox binary), LGPL-2.1+ (libraries)
 SOX_LICENSE_FILES = LICENSE.GPL LICENSE.LGPL
 
-# MIPS Codescape toolchains don't support stack-smashing protection
-# despite of using glibc.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_IMG_MIPS)$(BR2_TOOLCHAIN_EXTERNAL_CODESCAPE_MTI_MIPS),y)
-SOX_CONF_OPTS += --disable-stack-protector
-endif
+SOX_CONF_OPTS = \
+	--with-distro="Buildroot" \
+	--without-ffmpeg \
+	--disable-gomp \
+	--disable-stack-protector
 
 ifeq ($(BR2_PACKAGE_ALSA_LIB_PCM),y)
 SOX_DEPENDENCIES += alsa-lib
diff --git a/buildroot/package/spice-protocol/spice-protocol.hash b/buildroot/package/spice-protocol/spice-protocol.hash
index e72bb2d71..c23135141 100644
--- a/buildroot/package/spice-protocol/spice-protocol.hash
+++ b/buildroot/package/spice-protocol/spice-protocol.hash
@@ -1,2 +1,5 @@
 # Locally calculated after checking pgp signature
-sha256	20350bc4309039fdf0d29ee4fd0033cde27bccf33501e13b3c1befafde9d0c9c	spice-protocol-0.12.14.tar.bz2
+sha256	b6a4aa1ca32668790b45a494bbd000e9d05797b391d5a5d4b91adf1118216eac	spice-protocol-0.14.0.tar.bz2
+
+# Hash for license file
+sha256	eb55ea746be694c449224c7ddce6340648b075fd377281712a19094e7fb7ef92	COPYING
diff --git a/buildroot/package/spice-protocol/spice-protocol.mk b/buildroot/package/spice-protocol/spice-protocol.mk
index 7392e9533..f8c55c7b0 100644
--- a/buildroot/package/spice-protocol/spice-protocol.mk
+++ b/buildroot/package/spice-protocol/spice-protocol.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SPICE_PROTOCOL_VERSION = 0.12.14
+SPICE_PROTOCOL_VERSION = 0.14.0
 SPICE_PROTOCOL_SOURCE = spice-protocol-$(SPICE_PROTOCOL_VERSION).tar.bz2
 SPICE_PROTOCOL_SITE = http://www.spice-space.org/download/releases
 SPICE_PROTOCOL_LICENSE = BSD-3-Clause
diff --git a/buildroot/package/spice/0001-configure.ac-add-enable-tests.patch b/buildroot/package/spice/0001-configure.ac-add-enable-tests.patch
new file mode 100644
index 000000000..668dea1ca
--- /dev/null
+++ b/buildroot/package/spice/0001-configure.ac-add-enable-tests.patch
@@ -0,0 +1,54 @@
+From 1b6eaf5589a14763452cbe53382cc699cdeca141 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Fri, 15 Nov 2019 11:36:14 +0100
+Subject: [PATCH] configure.ac: add --enable-tests
+
+Allow the user to disable tests through --disable-tests, this is
+especially useful for example to disable gdk-pixbuf dependency
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status:
+https://gitlab.freedesktop.org/spice/spice-common/merge_requests/6]
+---
+ Makefile.am  | 6 +++++-
+ configure.ac | 7 +++++++
+ 2 files changed, 12 insertions(+), 1 deletion(-)
+
+diff --git a/subprojects/spice-common/Makefile.am b/subprojects/spice-common/Makefile.am
+index 5402499..00623a1 100644
+--- a/subprojects/spice-common/Makefile.am
++++ b/subprojects/spice-common/Makefile.am
+@@ -1,7 +1,11 @@
+ NULL =
+ ACLOCAL_AMFLAGS = -I m4
+ 
+-SUBDIRS = python_modules common tests docs
++SUBDIRS = python_modules common docs
++
++if ENABLE_TESTS
++SUBDIRS += tests
++endif
+ 
+ EXTRA_DIST =				\
+ 	meson.build			\
+diff --git a/subprojects/spice-common/configure.ac b/subprojects/spice-common/configure.ac
+index 9d10287..2dba7c8 100644
+--- a/subprojects/spice-common/configure.ac
++++ b/subprojects/spice-common/configure.ac
+@@ -33,6 +33,13 @@ AC_SEARCH_LIBS(regcomp, [regex rx])
+ SPICE_CHECK_SYSDEPS
+ SPICE_EXTRA_CHECKS
+ 
++AC_ARG_ENABLE([tests],
++  AS_HELP_STRING([--enable-tests],
++                 [Enable tests @<:@default=yes@:>@]),
++  [],
++  enable_tests="yes")
++AM_CONDITIONAL(ENABLE_TESTS, test "x$enable_tests" = "xyes")
++
+ AC_ARG_ENABLE([alignment-checks],
+   AS_HELP_STRING([--enable-alignment-checks],
+                  [Enable runtime checks for cast alignment @<:@default=no@:>@]),
+-- 
+2.23.0
+
diff --git a/buildroot/package/spice/spice.hash b/buildroot/package/spice/spice.hash
index 1a25926ab..424324412 100644
--- a/buildroot/package/spice/spice.hash
+++ b/buildroot/package/spice/spice.hash
@@ -1,2 +1,3 @@
 # Locally calculated
-sha256	1ead5de63d06eededed4017db37240f07bef0abffbaf621899647e7e685a1519	spice-0.14.1.tar.bz2
+sha256	b203b3882e06f4c7249a3150d90c84e1a90490d41ead255a3d2cede46f4a29a7	spice-0.14.2.tar.bz2
+sha256	dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551	COPYING
diff --git a/buildroot/package/spice/spice.mk b/buildroot/package/spice/spice.mk
index 16e57441a..8c421abf2 100644
--- a/buildroot/package/spice/spice.mk
+++ b/buildroot/package/spice/spice.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SPICE_VERSION = 0.14.1
+SPICE_VERSION = 0.14.2
 SPICE_SOURCE = spice-$(SPICE_VERSION).tar.bz2
 SPICE_SITE = http://www.spice-space.org/download/releases/spice-server
 SPICE_LICENSE = LGPL-2.1+
@@ -17,6 +17,8 @@ SPICE_DEPENDENCIES = \
 	openssl \
 	pixman \
 	spice-protocol
+# We're patching subprojects/spice-common/configure.ac
+SPICE_AUTORECONF = YES
 
 # We disable everything for now, because the dependency tree can become
 # quite deep if we try to enable some features, and I have not tested that.
@@ -25,7 +27,8 @@ SPICE_CONF_OPTS = \
 	--disable-opengl \
 	--disable-smartcard \
 	--without-sasl \
-	--disable-manual
+	--disable-manual \
+	--disable-tests
 
 SPICE_DEPENDENCIES += host-pkgconf
 
diff --git a/buildroot/package/spidev_test/Config.in b/buildroot/package/spidev_test/Config.in
index 0d8214cc2..44990c66b 100644
--- a/buildroot/package/spidev_test/Config.in
+++ b/buildroot/package/spidev_test/Config.in
@@ -14,4 +14,4 @@ config BR2_PACKAGE_SPIDEV_TEST
 	  This means you won't have quad-pumped SPI support if your
 	  toolchain is too old.
 
-	  https://www.kernel.org/doc/Documentation/spi/spidev_test.c
+	  https://www.kernel.org/doc/html/latest/spi/index.html
diff --git a/buildroot/package/squid/0001-acinclude-os-deps.m4-fix-cross-compilation.patch b/buildroot/package/squid/0001-acinclude-os-deps.m4-fix-cross-compilation.patch
new file mode 100644
index 000000000..4c4fd5c8d
--- /dev/null
+++ b/buildroot/package/squid/0001-acinclude-os-deps.m4-fix-cross-compilation.patch
@@ -0,0 +1,42 @@
+From 5dbaf8eebc5b66230e0131b09651c7e40bf0e9de Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Tue, 20 Aug 2019 21:41:16 +0200
+Subject: [PATCH] acinclude/os-deps.m4: fix cross-compilation
+
+Do not check check file descriptor maximum value through AC_RUN_IFELSE
+when cross-compiling as this will raise an error
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status: https://github.com/squid-cache/squid/pull/464]
+---
+ acinclude/os-deps.m4 | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/acinclude/os-deps.m4 b/acinclude/os-deps.m4
+index b50717517..ec10a54c6 100644
+--- a/acinclude/os-deps.m4
++++ b/acinclude/os-deps.m4
+@@ -169,7 +169,9 @@ AC_MSG_CHECKING(Maximum number of filedescriptors we can open)
+ SQUID_STATE_SAVE(maxfd)
+ dnl FreeBSD pthreads break dup2().
+   AS_CASE([$host_os],[freebsd],[ LDFLAGS=`echo $LDFLAGS | sed -e "s/-pthread//"` ])
+-  AC_RUN_IFELSE([AC_LANG_SOURCE([[
++  dnl AC_RUN_IFELSE can't be run when cross-compiling
++  AS_CASE([$cross_compiling],[no],[
++    AC_RUN_IFELSE([AC_LANG_SOURCE([[
+ #include 
+ #include 
+ #include 
+@@ -231,7 +233,8 @@ int main(int argc, char **argv) {
+ 	fprintf (fp, "%d\n", i & ~0x3F);
+ 	return 0;
+ }
+-  ]])],[squid_filedescriptors_limit=`cat conftestval`],[],[])
++    ]])],[squid_filedescriptors_limit=`cat conftestval`],[],[])
++  ])
+   dnl Microsoft MSVCRT.DLL supports 2048 maximum FDs
+   AS_CASE(["$host_os"],[mingw|mingw32],[squid_filedescriptors_limit="2048"])
+   AC_MSG_RESULT($squid_filedescriptors_limit)
+-- 
+2.20.1
+
diff --git a/buildroot/package/squid/0001-configure.ac-use-pkg-config-to-find-libxml2.patch b/buildroot/package/squid/0001-configure.ac-use-pkg-config-to-find-libxml2.patch
deleted file mode 100644
index cc1a9f058..000000000
--- a/buildroot/package/squid/0001-configure.ac-use-pkg-config-to-find-libxml2.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 39edb8ef08f51ea6a454d286091d78a4514c89e0 Mon Sep 17 00:00:00 2001
-From: Fabrice Fontaine 
-Date: Sat, 1 Dec 2018 18:21:55 +0100
-Subject: [PATCH] configure.ac: use pkg-config to find libxml2
-
-Fix static build of squid with libxml2 by using pkg-config to find
-libxml2 dependencies like -lz or -liconv
-
-Fixes:
- - http://autobuild.buildroot.org/results/7f23eb98c311b294c7f0e165279fa26909a5ff93
-
-Signed-off-by: Fabrice Fontaine 
-[Upstream status: https://github.com/squid-cache/squid/pull/338]
----
- configure.ac | 43 +++++++++++++++++++++++++------------------
- 1 file changed, 25 insertions(+), 18 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index f30d824aa..47553db46 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -900,29 +900,36 @@ fi
- 
- AC_ARG_WITH(libxml2, AS_HELP_STRING([--without-libxml2],[Do not use libxml2 for ESI. Default: auto-detect]))
- if test "x$squid_opt_use_esi" != "xno" -a "x$with_libxml2" != "xno" ; then
--  AC_CHECK_LIB([xml2], [main], [XMLLIB="-lxml2"; HAVE_LIBXML2=1])
--  dnl Find the main header and include path...
--  AC_CACHE_CHECK([location of libxml2 include files], [ac_cv_libxml2_include], [
--    AC_CHECK_HEADERS([libxml/parser.h], [], [
--      AC_MSG_NOTICE([Testing in /usr/include/libxml2])
--      SAVED_CPPFLAGS="$CPPFLAGS"
--      CPPFLAGS="-I/usr/include/libxml2 $CPPFLAGS"
--      unset ac_cv_header_libxml_parser_h
--      AC_CHECK_HEADERS([libxml/parser.h], [ac_cv_libxml2_include="-I/usr/include/libxml2"], [
--        AC_MSG_NOTICE([Testing in /usr/local/include/libxml2])
--        CPPFLAGS="-I/usr/local/include/libxml2 $SAVED_CPPFLAGS"
-+   PKG_CHECK_MODULES([LIBXML2],[libxml-2.0],[
-+    CPPFLAGS="$CPPFLAGS $LIBXML2_CFLAGS";
-+    SQUID_CXXFLAGS="$SQUID_CXXFLAGS $LIBXML2_CFLAGS";
-+    XMLLIB="$LIBXML2_LIBS";
-+    HAVE_LIBXML2=1
-+    ],[
-+    AC_CHECK_LIB([xml2], [main], [XMLLIB="-lxml2"; HAVE_LIBXML2=1])
-+    dnl Find the main header and include path...
-+    AC_CACHE_CHECK([location of libxml2 include files], [ac_cv_libxml2_include], [
-+      AC_CHECK_HEADERS([libxml/parser.h], [], [
-+        AC_MSG_NOTICE([Testing in /usr/include/libxml2])
-+        SAVED_CPPFLAGS="$CPPFLAGS"
-+        CPPFLAGS="-I/usr/include/libxml2 $CPPFLAGS"
-         unset ac_cv_header_libxml_parser_h
--        AC_CHECK_HEADERS([libxml/parser.h], [ac_cv_libxml2_include="-I/usr/local/include/libxml2"], [
--          AC_MSG_NOTICE([Failed to find libxml2 header file libxml/parser.h])
-+        AC_CHECK_HEADERS([libxml/parser.h], [ac_cv_libxml2_include="-I/usr/include/libxml2"], [
-+          AC_MSG_NOTICE([Testing in /usr/local/include/libxml2])
-+          CPPFLAGS="-I/usr/local/include/libxml2 $SAVED_CPPFLAGS"
-+          unset ac_cv_header_libxml_parser_h
-+          AC_CHECK_HEADERS([libxml/parser.h], [ac_cv_libxml2_include="-I/usr/local/include/libxml2"], [
-+            AC_MSG_NOTICE([Failed to find libxml2 header file libxml/parser.h])
-+          ])
-         ])
-+        CPPFLAGS="$SAVED_CPPFLAGS"
-       ])
--      CPPFLAGS="$SAVED_CPPFLAGS"
-     ])
-+    if test "x$ac_cv_libxml2_include" != "x"; then
-+        SQUID_CXXFLAGS="$ac_cv_libxml2_include $SQUID_CXXFLAGS"
-+        CPPFLAGS="$ac_cv_libxml2_include $CPPFLAGS"
-+    fi
-   ])
--  if test "x$ac_cv_libxml2_include" != "x"; then
--      SQUID_CXXFLAGS="$ac_cv_libxml2_include $SQUID_CXXFLAGS"
--      CPPFLAGS="$ac_cv_libxml2_include $CPPFLAGS"
--  fi
-   dnl Now that we know where to look find the headers...
-   AC_CHECK_HEADERS(libxml/parser.h libxml/HTMLparser.h libxml/HTMLtree.h)
-   AC_DEFINE_UNQUOTED(HAVE_LIBXML2, $HAVE_LIBXML2, [Define to 1 if you have the libxml2 library])
--- 
-2.17.1
-
diff --git a/buildroot/package/squid/squid.hash b/buildroot/package/squid/squid.hash
index 5e872707c..ff694da6a 100644
--- a/buildroot/package/squid/squid.hash
+++ b/buildroot/package/squid/squid.hash
@@ -1,6 +1,6 @@
-# From http://www.squid-cache.org/Versions/v4/squid-4.4.tar.xz.asc
-md5 892504ca9700e1f139a53f84098613bd squid-4.4.tar.xz
-sha1 0ab6b133f65866d825bf72cbbe8cef209768b2fa squid-4.4.tar.xz
+# From http://www.squid-cache.org/Versions/v4/squid-4.8.tar.xz.asc
+md5 08e018f2d8db4911ee90591284fa1ca5 squid-4.8.tar.xz
+sha1 4ff1390eee3ec20cefa5565cbb56e1a89a12bfc1 squid-4.8.tar.xz
 # Locally calculated
-sha256 4905e6da7f5574d2583ba36f398bb062a12d51e70d67035078b6e85b09e9ee82 squid-4.4.tar.xz
+sha256 78cdb324d93341d36d09d5f791060f6e8aaa5ff3179f7c949cd910d023a86210 squid-4.8.tar.xz
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 COPYING
diff --git a/buildroot/package/squid/squid.mk b/buildroot/package/squid/squid.mk
index 5d5ec0c38..0d09968bd 100644
--- a/buildroot/package/squid/squid.mk
+++ b/buildroot/package/squid/squid.mk
@@ -4,15 +4,15 @@
 #
 ################################################################################
 
-SQUID_VERSION = 4.4
+SQUID_VERSION = 4.8
 SQUID_SOURCE = squid-$(SQUID_VERSION).tar.xz
 SQUID_SITE = http://www.squid-cache.org/Versions/v4
 SQUID_LICENSE = GPL-2.0+
 SQUID_LICENSE_FILES = COPYING
-# We're patching configure.ac
-SQUID_AUTORECONF = YES
 SQUID_DEPENDENCIES = libcap host-libcap libxml2 host-pkgconf \
 	$(if $(BR2_PACKAGE_LIBNETFILTER_CONNTRACK),libnetfilter_conntrack)
+# We're patching acinclude/os-deps.m4
+SQUID_AUTORECONF = YES
 SQUID_CONF_ENV = \
 	ac_cv_epoll_works=yes \
 	ac_cv_func_setresuid=yes \
diff --git a/buildroot/package/subversion/subversion.hash b/buildroot/package/subversion/subversion.hash
index be0c8ec93..7f94631f8 100644
--- a/buildroot/package/subversion/subversion.hash
+++ b/buildroot/package/subversion/subversion.hash
@@ -1,5 +1,5 @@
 # From https://www.apache.org/dist/subversion/subversion-1.9.10.tar.bz2.sha512
-sha512 58ac11078e0e5a1720199e5c66da76e7a20b86d02edcb8d313f98e2ddc74ae70aa3e0763a7d8a8fcb5a1fd7d65186829625ff110d78028b1c447e91f420d6f48 subversion-1.9.10.tar.bz2
+sha512 08a5c6c0233cc1dbd992180d2077eb1c67725682c457d3f67ebb6d22db0f6b64002a699ab828d435b708340ce6fb07bb1f03d11daefb887053c427ed75ad2de7 subversion-1.9.12.tar.bz2
 
 # Locally calculated
 sha256 3202942c1aba495fd17390618dedc1d3542815c5bc11958da7fd98c985abc11a LICENSE
diff --git a/buildroot/package/subversion/subversion.mk b/buildroot/package/subversion/subversion.mk
index 0e26cfd4b..1013f1fc5 100644
--- a/buildroot/package/subversion/subversion.mk
+++ b/buildroot/package/subversion/subversion.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SUBVERSION_VERSION = 1.9.10
+SUBVERSION_VERSION = 1.9.12
 SUBVERSION_SOURCE = subversion-$(SUBVERSION_VERSION).tar.bz2
 SUBVERSION_SITE = http://mirror.catn.com/pub/apache/subversion
 SUBVERSION_LICENSE = Apache-2.0
diff --git a/buildroot/package/sudo/sudo.hash b/buildroot/package/sudo/sudo.hash
index 3f20ccb15..179595298 100644
--- a/buildroot/package/sudo/sudo.hash
+++ b/buildroot/package/sudo/sudo.hash
@@ -1,4 +1,4 @@
 # From: http://www.sudo.ws/download.html
-sha256 d863d29b6fc87bc784a3223350e2b28a2ff2c4738f0fb8f1c92bb38c3017e679  sudo-1.8.23.tar.gz
+sha256 9129fa745a08caff0ce2042d2162b38eb9bf73bf43fcb248ac8b3a750c1f13a1  sudo-1.8.28.tar.gz
 # Locally calculated
-sha256 b6625a7b58e9469a7adfd1732960579a19fe84b3508030f9a31641283e2250b8  doc/LICENSE
+sha256 e0e7990185834e9f08f3e922905d7bfaf998d13be668c6026d2586b1718210ba  doc/LICENSE
diff --git a/buildroot/package/sudo/sudo.mk b/buildroot/package/sudo/sudo.mk
index 136b6c691..cf8b63b1d 100644
--- a/buildroot/package/sudo/sudo.mk
+++ b/buildroot/package/sudo/sudo.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-SUDO_VERSION = 1.8.23
+SUDO_VERSION = 1.8.28
 SUDO_SITE = https://www.sudo.ws/sudo/dist
 SUDO_LICENSE = ISC, BSD-3-Clause
 SUDO_LICENSE_FILES = doc/LICENSE
diff --git a/buildroot/package/swupdate/Config.in b/buildroot/package/swupdate/Config.in
index ca2eaf294..3d1beae6b 100644
--- a/buildroot/package/swupdate/Config.in
+++ b/buildroot/package/swupdate/Config.in
@@ -22,7 +22,7 @@ config BR2_PACKAGE_SWUPDATE
 
 	  * Select BR2_PACKAGE_LUA or BR2_PACKAGE_LUAJIT if you want
 	    want to have Lua support.
-	  * Select BR2_LIBCURL if you want to use the download
+	  * Select BR2_PACKAGE_LIBCURL if you want to use the download
 	    feature.
 	  * Select BR2_PACKAGE_OPENSSL is you want to add encryption
 	    support.
diff --git a/buildroot/package/syslog-ng/Config.in b/buildroot/package/syslog-ng/Config.in
index fbc236221..6b3ad6752 100644
--- a/buildroot/package/syslog-ng/Config.in
+++ b/buildroot/package/syslog-ng/Config.in
@@ -13,7 +13,7 @@ config BR2_PACKAGE_SYSLOG_NG
 	  of input and output methods: syslog, unstructured text,
 	  queueing, SQL & NoSQL
 
-	  https://syslog-ng.org/
+	  https://www.syslog-ng.com/products/open-source-log-management/
 
 comment "syslog-ng needs a toolchain w/ wchar, threads"
 	depends on BR2_USE_MMU
diff --git a/buildroot/package/systemd-bootchart/systemd-bootchart.mk b/buildroot/package/systemd-bootchart/systemd-bootchart.mk
index bcc3dbe22..62bc79539 100644
--- a/buildroot/package/systemd-bootchart/systemd-bootchart.mk
+++ b/buildroot/package/systemd-bootchart/systemd-bootchart.mk
@@ -16,4 +16,10 @@ SYSTEMD_BOOTCHART_DEPENDENCIES = systemd
 
 SYSTEMD_BOOTCHART_CONF_OPTS = --disable-man
 
+define SYSTEMD_BOOTCHART_INSTALL_INIT_SYSTEMD
+	mkdir -p $(TARGET_DIR)/etc/systemd/system/sysinit.target.wants
+	ln -sf ../../../../lib/systemd/system/systemd-bootchart.service \
+		$(TARGET_DIR)/etc/systemd/system/sysinit.target.wants/systemd-bootchart.service
+endef
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/systemd/Config.in b/buildroot/package/systemd/Config.in
index 920b65db4..aa763cd12 100644
--- a/buildroot/package/systemd/Config.in
+++ b/buildroot/package/systemd/Config.in
@@ -140,6 +140,7 @@ config BR2_PACKAGE_SYSTEMD_HOSTNAMED
 config BR2_PACKAGE_SYSTEMD_HWDB
 	bool "enable hwdb installation"
 	default y
+	select BR2_PACKAGE_HOST_EUDEV # for udevadm, during target-finalize
 	help
 	  Enables hardware database installation to /usr/lib/udev/hwdb.d
 
diff --git a/buildroot/package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch b/buildroot/package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch
new file mode 100644
index 000000000..2c6ebd74d
--- /dev/null
+++ b/buildroot/package/taglib/0001-fix-taglib-config-file-for-cross-compiling-906.patch
@@ -0,0 +1,66 @@
+From 7470f92a67375d00e53b3785a88fa7b26ad6f1da Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?J=C3=B6rg=20Krause?= 
+Date: Fri, 17 May 2019 13:13:35 +0200
+Subject: [PATCH] fix taglib-config file for cross compiling (#906)
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The current taglib-config program does not work for cross-compiling as it only
+returns the paths to the host, which breaks building programs which uses
+`taglib-config` to link against taglib.
+
+Fix this by passing sysroot to the `prefix` and `exec_prefix` fields.
+
+Backported from: 7470f92a67375d00e53b3785a88fa7b26ad6f1da
+
+Signed-off-by: Jörg Krause 
+---
+ CMakeLists.txt      |  2 +-
+ taglib-config.cmake | 10 +++++-----
+ 2 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 2de06324..1a0302c4 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -105,7 +105,7 @@ math(EXPR TAGLIB_SOVERSION_PATCH "${TAGLIB_SOVERSION_REVISION}")
+ include(ConfigureChecks.cmake)
+ 
+ if(NOT WIN32)
+-  configure_file("${CMAKE_CURRENT_SOURCE_DIR}/taglib-config.cmake" "${CMAKE_CURRENT_BINARY_DIR}/taglib-config")
++  configure_file("${CMAKE_CURRENT_SOURCE_DIR}/taglib-config.cmake" "${CMAKE_CURRENT_BINARY_DIR}/taglib-config" @ONLY)
+   install(PROGRAMS "${CMAKE_CURRENT_BINARY_DIR}/taglib-config" DESTINATION "${BIN_INSTALL_DIR}")
+ endif()
+ 
+diff --git a/taglib-config.cmake b/taglib-config.cmake
+index 2bc2811a..96ef6883 100644
+--- a/taglib-config.cmake
++++ b/taglib-config.cmake
+@@ -14,10 +14,10 @@ EOH
+ 	exit 1;
+ }
+ 
+-prefix=${CMAKE_INSTALL_PREFIX}
+-exec_prefix=${CMAKE_INSTALL_PREFIX}
+-libdir=${LIB_INSTALL_DIR}
+-includedir=${INCLUDE_INSTALL_DIR}
++prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@
++exec_prefix=@CMAKE_SYSROOT@@CMAKE_INSTALL_PREFIX@
++libdir=${exec_prefix}/lib
++includedir=${prefix}/include
+ 
+ flags=""
+ 
+@@ -35,7 +35,7 @@ do
+ 	  flags="$flags -I$includedir/taglib"
+ 	  ;;
+     --version)
+-	  echo ${TAGLIB_LIB_VERSION_STRING}
++	  echo @TAGLIB_LIB_VERSION_STRING@
+ 	  ;;
+     --prefix)
+ 	  echo $prefix
+-- 
+2.22.0
+
diff --git a/buildroot/package/tcllib/Config.in b/buildroot/package/tcllib/Config.in
index b0a4ad060..3a307b9ae 100644
--- a/buildroot/package/tcllib/Config.in
+++ b/buildroot/package/tcllib/Config.in
@@ -8,4 +8,4 @@ config BR2_PACKAGE_TCLLIB
 	  is to collect commonly used function into a single library,
 	  which users can rely on to be available and stable
 
-	  http://tcl.activestate.com/software/tcllib/
+	  https://www.tcl.tk/software/tcllib/
diff --git a/buildroot/package/tcpdump/tcpdump.hash b/buildroot/package/tcpdump/tcpdump.hash
index 0eb56e695..da5c9aa74 100644
--- a/buildroot/package/tcpdump/tcpdump.hash
+++ b/buildroot/package/tcpdump/tcpdump.hash
@@ -1,3 +1,5 @@
-# Locally calculated after checking pgp signature at http://www.tcpdump.org/release/tcpdump-4.9.2.tar.gz.sig
-sha256 798b3536a29832ce0cbb07fafb1ce5097c95e308a6f592d14052e1ef1505fe79  tcpdump-4.9.2.tar.gz
+# Locally calculated after checking pgp signature at
+# http://www.tcpdump.org/release/tcpdump-4.9.3.tar.gz.sig
+# using key 1F166A5742ABB9E0249A8D30E089DEF1D9C15D0D
+sha256 2cd47cb3d460b6ff75f4a9940f594317ad456cfbf2bd2c8e5151e16559db6410  tcpdump-4.9.3.tar.gz
 sha256 9b03d5d13e66d6de02a4bb2d0dd1cb9f41808d045962cdcc42350d5291b141a1  LICENSE
diff --git a/buildroot/package/tcpdump/tcpdump.mk b/buildroot/package/tcpdump/tcpdump.mk
index 2a6d095c2..72bf6f870 100644
--- a/buildroot/package/tcpdump/tcpdump.mk
+++ b/buildroot/package/tcpdump/tcpdump.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-TCPDUMP_VERSION = 4.9.2
+TCPDUMP_VERSION = 4.9.3
 TCPDUMP_SITE = http://www.tcpdump.org/release
 TCPDUMP_LICENSE = BSD-3-Clause
 TCPDUMP_LICENSE_FILES = LICENSE
diff --git a/buildroot/package/tcpreplay/0001-configure-ac-fix-without-libdnet.patch b/buildroot/package/tcpreplay/0001-configure-ac-fix-without-libdnet.patch
new file mode 100644
index 000000000..75ed4f94d
--- /dev/null
+++ b/buildroot/package/tcpreplay/0001-configure-ac-fix-without-libdnet.patch
@@ -0,0 +1,76 @@
+From acee9c0c46f71f1f4c33c2dadf69d19e24b90f27 Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Tue, 13 Aug 2019 20:19:23 +0200
+Subject: [PATCH] configure.ac: fix --without-libdnet
+
+Allow the user to disable libdnet check through --without-libdnet.
+This option is useful to cross-compile tcpreplay to avoid build failures
+if libdnet is installed on host but not on target, see
+https://bugs.buildroot.org/show_bug.cgi?id=12096
+
+Signed-off-by: Fabrice Fontaine 
+[Upstream status: https://github.com/appneta/tcpreplay/pull/567]
+---
+ configure.ac | 48 +++++++++++++++++++++++++-----------------------
+ 1 file changed, 25 insertions(+), 23 deletions(-)
+
+diff --git a/configure.ac b/configure.ac
+index 39ba58b7..5de3dcb5 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -1464,30 +1464,32 @@ if test $have_cygwin = no ; then
+         AC_HELP_STRING([--with-libdnet=DIR], [Use libdnet in DIR]),
+         [trydnetdir=$withval])
+ 
+-    case "$build_os" in
+-    linux*)
+-        dnl # Debian/Ubuntu already have a package called libdnet
+-        dnl # so you the package you want to install libdumbnet-dev
+-        for testdir in $trydnetdir /usr/local /opt/local /usr ; do
+-            if test -x ${testdir}/bin/dumbnet-config -a $founddnet = no ; then
+-                LDNETINC="$($testdir/bin/dumbnet-config --cflags)"
+-                LDNETLIB="$($testdir/bin/dumbnet-config --libs)"
+-                libdnet_version="$($testdir/bin/dumbnet-config --version) (libdumbnet)"
+-                founddnet=$testdir
+-            fi
+-        done
+-        ;;
+-    esac
++    if test $trydnetdir != no; then
++        case "$build_os" in
++        linux*)
++            dnl # Debian/Ubuntu already have a package called libdnet
++            dnl # so you the package you want to install libdumbnet-dev
++            for testdir in $trydnetdir /usr/local /opt/local /usr ; do
++                if test -x ${testdir}/bin/dumbnet-config -a $founddnet = no ; then
++                    LDNETINC="$($testdir/bin/dumbnet-config --cflags)"
++                    LDNETLIB="$($testdir/bin/dumbnet-config --libs)"
++                    libdnet_version="$($testdir/bin/dumbnet-config --version) (libdumbnet)"
++                    founddnet=$testdir
++                fi
++            done
++            ;;
++        esac
+ 
+-    if test $founddnet = no ; then
+-        for testdir in $trydnetdir /usr/local /opt/local $MACOSX_SDK_PATH/usr /usr ; do
+-            if test -x ${testdir}/bin/dnet-config -a $founddnet = no ; then
+-                LDNETINC="$($testdir/bin/dnet-config --cflags)"
+-                LDNETLIB="$($testdir/bin/dnet-config --libs)"
+-                libdnet_version="$($testdir/bin/dnet-config --version)"
+-                founddnet=$testdir
+-            fi
+-        done
++        if test $founddnet = no ; then
++            for testdir in $trydnetdir /usr/local /opt/local $MACOSX_SDK_PATH/usr /usr ; do
++                if test -x ${testdir}/bin/dnet-config -a $founddnet = no ; then
++                    LDNETINC="$($testdir/bin/dnet-config --cflags)"
++                    LDNETLIB="$($testdir/bin/dnet-config --libs)"
++                    libdnet_version="$($testdir/bin/dnet-config --version)"
++                    founddnet=$testdir
++                fi
++            done
++        fi
+     fi
+ 
+     if test $founddnet = no ; then
diff --git a/buildroot/package/tcpreplay/tcpreplay.hash b/buildroot/package/tcpreplay/tcpreplay.hash
index 31b3d3eb2..cc00bc09b 100644
--- a/buildroot/package/tcpreplay/tcpreplay.hash
+++ b/buildroot/package/tcpreplay/tcpreplay.hash
@@ -1,5 +1,5 @@
 # Locally calculated after checking pgp signature
-# https://github.com/appneta/tcpreplay/releases/download/v4.3.1/tcpreplay-4.3.1.tar.xz.asc
+# https://github.com/appneta/tcpreplay/releases/download/v4.3.2/tcpreplay-4.3.2.tar.xz.asc
 # using key 84E4FA215C934A7D97DC76D5E9E2149793BDE17E
-sha256 108924a25e616e3465139410c49cae629c338df73443dfc8fc155ea9f099c659  tcpreplay-4.3.1.tar.xz
+sha256 955aed6a40f49a5b8c1234fd0a928edc5c665d94b7755ab5769c30938e33f380  tcpreplay-4.3.2.tar.xz
 sha256 5971b0c544622f4b210a9cc56436a970685d3b0666e373c09e3cf9304db15d05  docs/LICENSE
diff --git a/buildroot/package/tcpreplay/tcpreplay.mk b/buildroot/package/tcpreplay/tcpreplay.mk
index 71e57d5bd..39d0f4434 100644
--- a/buildroot/package/tcpreplay/tcpreplay.mk
+++ b/buildroot/package/tcpreplay/tcpreplay.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-TCPREPLAY_VERSION = 4.3.1
+TCPREPLAY_VERSION = 4.3.2
 TCPREPLAY_SITE = https://github.com/appneta/tcpreplay/releases/download/v$(TCPREPLAY_VERSION)
-TCPREPLAY_SOURCE = tcpreplay-4.3.1.tar.xz
+TCPREPLAY_SOURCE = tcpreplay-$(TCPREPLAY_VERSION).tar.xz
 TCPREPLAY_LICENSE = GPL-3.0
 TCPREPLAY_LICENSE_FILES = docs/LICENSE
 TCPREPLAY_CONF_ENV = \
@@ -14,12 +14,21 @@ TCPREPLAY_CONF_ENV = \
 TCPREPLAY_CONF_OPTS = --with-libpcap=$(STAGING_DIR)/usr \
 	--enable-pcapconfig
 TCPREPLAY_DEPENDENCIES = libpcap
+# We're patching configure.ac
+TCPREPLAY_AUTORECONF = YES
 
 ifeq ($(BR2_STATIC_LIBS),y)
 TCPREPLAY_CONF_OPTS += --enable-dynamic-link=no
 TCPREPLAY_CONF_ENV += LIBS="`$(STAGING_DIR)/usr/bin/pcap-config --static --libs`"
 endif
 
+ifeq ($(BR2_PACKAGE_LIBDNET),y)
+TCPREPLAY_DEPENDENCIES += libdnet
+TCPREPLAY_CONF_OPTS += --with-libdnet=$(STAGING_DIR)/usr
+else
+TCPREPLAY_CONF_OPTS += --without-libdnet
+endif
+
 ifeq ($(BR2_PACKAGE_TCPDUMP),y)
 TCPREPLAY_CONF_ENV += ac_cv_path_tcpdump_path=/usr/sbin/tcpdump
 else
diff --git a/buildroot/package/tftpd/Config.in b/buildroot/package/tftpd/Config.in
index ea5cb303f..d4e81e70b 100644
--- a/buildroot/package/tftpd/Config.in
+++ b/buildroot/package/tftpd/Config.in
@@ -6,3 +6,5 @@ config BR2_PACKAGE_TFTPD
 	depends on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
 	help
 	  HPA's Trivial File Transfer Protocol (tftp) server.
+
+	  https://git.kernel.org/pub/scm/network/tftp/tftp-hpa.git
diff --git a/buildroot/package/tftpd/tftpd.hash b/buildroot/package/tftpd/tftpd.hash
index 247b757fa..c876b2edc 100644
--- a/buildroot/package/tftpd/tftpd.hash
+++ b/buildroot/package/tftpd/tftpd.hash
@@ -1,2 +1,5 @@
 # From https://www.kernel.org/pub/software/network/tftp/tftp-hpa/sha256sums.asc
 sha256	afee361df96a2f88344e191f6a25480fd714e1d28d176c3f10cc43fa206b718b	tftp-hpa-5.2.tar.xz
+
+# Hash for license file
+sha256	5efef82650b8ece733e37790fc70f05e426c9e1ef9640d4ebcb04867bd3f5e28	tftpd/tftpd.c
diff --git a/buildroot/package/tftpd/tftpd.mk b/buildroot/package/tftpd/tftpd.mk
index c42456afd..57905fda0 100644
--- a/buildroot/package/tftpd/tftpd.mk
+++ b/buildroot/package/tftpd/tftpd.mk
@@ -8,6 +8,8 @@ TFTPD_VERSION = 5.2
 TFTPD_SOURCE = tftp-hpa-$(TFTPD_VERSION).tar.xz
 TFTPD_SITE = $(BR2_KERNEL_MIRROR)/software/network/tftp/tftp-hpa
 TFTPD_CONF_OPTS = --without-tcpwrappers
+TFTPD_LICENSE = BSD-4-Clause
+TFTPD_LICENSE_FILES = tftpd/tftpd.c
 
 define TFTPD_INSTALL_TARGET_CMDS
 	$(INSTALL) -D $(@D)/tftp/tftp $(TARGET_DIR)/usr/bin/tftp
diff --git a/buildroot/package/thttpd/S90thttpd b/buildroot/package/thttpd/S90thttpd
new file mode 100644
index 000000000..94b079b05
--- /dev/null
+++ b/buildroot/package/thttpd/S90thttpd
@@ -0,0 +1,54 @@
+#!/bin/sh
+
+DAEMON="thttpd"
+PIDFILE="/var/run/$DAEMON.pid"
+
+THTTPD_ARGS="-C /etc/thttpd.conf"
+
+# shellcheck source=/dev/null
+[ -r "/etc/default/$DAEMON" ] && . "/etc/default/$DAEMON"
+
+start() {
+	printf 'Starting %s: ' "$DAEMON"
+	# shellcheck disable=SC2086 # we need the word splitting
+	start-stop-daemon -S -q -p "$PIDFILE" -x "/usr/sbin/$DAEMON" \
+		-- $THTTPD_ARGS
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+stop() {
+	printf 'Stopping %s: ' "$DAEMON"
+	start-stop-daemon -K -q -p "$PIDFILE"
+	status=$?
+	if [ "$status" -eq 0 ]; then
+		# thttpd does not remove the pid file on exit
+		rm -f "$PIDFILE"
+		echo "OK"
+	else
+		echo "FAIL"
+	fi
+	return "$status"
+}
+
+restart() {
+	stop
+	sleep 1
+	start
+}
+
+case "$1" in
+	start|stop|restart)
+		"$1";;
+	reload)
+		# Restart, since there is no true "reload" feature.
+		restart;;
+	*)
+		echo "Usage: $0 {start|stop|restart|reload}"
+		exit 1
+esac
diff --git a/buildroot/package/thttpd/thttpd.mk b/buildroot/package/thttpd/thttpd.mk
index 29611fff2..6cf86e4b9 100644
--- a/buildroot/package/thttpd/thttpd.mk
+++ b/buildroot/package/thttpd/thttpd.mk
@@ -18,18 +18,19 @@ define THTTPD_INSTALL_TARGET_CMDS
 	$(INSTALL) -D -m 0755 $(@D)/extras/syslogtocern $(TARGET_DIR)/usr/bin/syslogtocern
 	$(INSTALL) -D -m 0755 $(@D)/scripts/thttpd_wrapper $(TARGET_DIR)/usr/sbin/thttpd_wrapper
 	$(SED) 's:/usr/local/sbin:/usr/sbin:g' -e \
-		's:/usr/local/www:/var/www:g' $(TARGET_DIR)/usr/sbin/thttpd_wrapper
+		's:/usr/local/www/thttpd_config:/etc/thttpd.conf:g' \
+		$(TARGET_DIR)/usr/sbin/thttpd_wrapper
 	$(INSTALL) -d $(TARGET_DIR)/var/www/data
 	$(INSTALL) -d $(TARGET_DIR)/var/www/logs
-	echo "dir=/var/www/data" > $(TARGET_DIR)/var/www/thttpd_config
-	echo 'cgipat=**.cgi' >> $(TARGET_DIR)/var/www/thttpd_config
-	echo "logfile=/var/www/logs/thttpd_log" >> $(TARGET_DIR)/var/www/thttpd_config
-	echo "pidfile=/var/run/thttpd.pid" >> $(TARGET_DIR)/var/www/thttpd_config
+	echo "dir=/var/www/data" > $(TARGET_DIR)/etc/thttpd.conf
+	echo 'cgipat=**.cgi' >> $(TARGET_DIR)/etc/thttpd.conf
+	echo "logfile=/var/www/logs/thttpd_log" >> $(TARGET_DIR)/etc/thttpd.conf
+	echo "pidfile=/var/run/thttpd.pid" >> $(TARGET_DIR)/etc/thttpd.conf
 endef
 
 define THTTPD_INSTALL_INIT_SYSV
-	$(INSTALL) -D -m 0755 $(@D)/scripts/thttpd.sh $(TARGET_DIR)/etc/init.d/S90thttpd
-	$(SED) 's:/usr/local/sbin:/usr/sbin:g' $(TARGET_DIR)/etc/init.d/S90thttpd
+	$(INSTALL) -D -m 0755 package/thttpd/S90thttpd \
+		$(TARGET_DIR)/etc/init.d/S90thttpd
 endef
 
 define THTTPD_INSTALL_INIT_SYSTEMD
diff --git a/buildroot/package/tiff/0001-Fix-for-simple-memory-leak-that-was-assigned-CVE-2019-6128.patch b/buildroot/package/tiff/0001-Fix-for-simple-memory-leak-that-was-assigned-CVE-2019-6128.patch
deleted file mode 100644
index 638760b71..000000000
--- a/buildroot/package/tiff/0001-Fix-for-simple-memory-leak-that-was-assigned-CVE-2019-6128.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 0c74a9f49b8d7a36b17b54a7428b3526d20f88a8 Mon Sep 17 00:00:00 2001
-From: Scott Gayou 
-Date: Wed, 23 Jan 2019 15:03:53 -0500
-Subject: [PATCH] Fix for simple memory leak that was assigned CVE-2019-6128.
-
-pal2rgb failed to free memory on a few errors. This was reported
-here: http://bugzilla.maptools.org/show_bug.cgi?id=2836.
-
-Signed-off-by: Fabrice Fontaine 
-[Retrieved from:
-https://gitlab.com/libtiff/libtiff/commit/ae0bed1fe530a82faf2e9ea1775109dbf301a971]
----
- tools/pal2rgb.c | 7 ++++++-
- 1 file changed, 6 insertions(+), 1 deletion(-)
-
-diff --git a/tools/pal2rgb.c b/tools/pal2rgb.c
-index 01d8502e..9492f1cf 100644
---- a/tools/pal2rgb.c
-+++ b/tools/pal2rgb.c
-@@ -118,12 +118,14 @@ main(int argc, char* argv[])
- 	    shortv != PHOTOMETRIC_PALETTE) {
- 		fprintf(stderr, "%s: Expecting a palette image.\n",
- 		    argv[optind]);
-+		(void) TIFFClose(in);
- 		return (-1);
- 	}
- 	if (!TIFFGetField(in, TIFFTAG_COLORMAP, &rmap, &gmap, &bmap)) {
- 		fprintf(stderr,
- 		    "%s: No colormap (not a valid palette image).\n",
- 		    argv[optind]);
-+		(void) TIFFClose(in);
- 		return (-1);
- 	}
- 	bitspersample = 0;
-@@ -131,11 +133,14 @@ main(int argc, char* argv[])
- 	if (bitspersample != 8) {
- 		fprintf(stderr, "%s: Sorry, can only handle 8-bit images.\n",
- 		    argv[optind]);
-+		(void) TIFFClose(in);
- 		return (-1);
- 	}
- 	out = TIFFOpen(argv[optind+1], "w");
--	if (out == NULL)
-+	if (out == NULL) {
-+		(void) TIFFClose(in);
- 		return (-2);
-+	}
- 	cpTags(in, out);
- 	TIFFGetField(in, TIFFTAG_IMAGEWIDTH, &imagewidth);
- 	TIFFGetField(in, TIFFTAG_IMAGELENGTH, &imagelength);
--- 
-2.18.1
-
diff --git a/buildroot/package/tiff/tiff.hash b/buildroot/package/tiff/tiff.hash
index 21eb4bd37..36f30c441 100644
--- a/buildroot/package/tiff/tiff.hash
+++ b/buildroot/package/tiff/tiff.hash
@@ -1,3 +1,3 @@
 # Locally computed
-sha256 2c52d11ccaf767457db0c46795d9c7d1a8d8f76f68b0b800a3dfe45786b996e4  tiff-4.0.10.tar.gz
+sha256 5d29f32517dadb6dbcd1255ea5bbc93a2b54b94fbf83653b4d65c7d6775b8634  tiff-4.1.0.tar.gz
 sha256 fbd6fed7938541d2c809c0826225fc85e551fdbfa8732b10f0c87e0847acafd7  COPYRIGHT
diff --git a/buildroot/package/tiff/tiff.mk b/buildroot/package/tiff/tiff.mk
index aef08b341..b26900ac7 100644
--- a/buildroot/package/tiff/tiff.mk
+++ b/buildroot/package/tiff/tiff.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-TIFF_VERSION = 4.0.10
+TIFF_VERSION = 4.1.0
 TIFF_SITE = http://download.osgeo.org/libtiff
 TIFF_LICENSE = tiff license
 TIFF_LICENSE_FILES = COPYRIGHT
diff --git a/buildroot/package/tvheadend/0002-Makefile-fix-pie-linking-according-to-disable-pie.patch b/buildroot/package/tvheadend/0002-Makefile-fix-pie-linking-according-to-disable-pie.patch
new file mode 100644
index 000000000..385c94b36
--- /dev/null
+++ b/buildroot/package/tvheadend/0002-Makefile-fix-pie-linking-according-to-disable-pie.patch
@@ -0,0 +1,34 @@
+From 5cbf08213222cb507d365e6cbda87277f0b8f31e Mon Sep 17 00:00:00 2001
+From: Giulio Benetti 
+Date: Fri, 14 Jun 2019 14:25:08 +0200
+Subject: [PATCH] Makefile: fix -pie linking according to --disable-pie
+
+Only compilation follows './configure --disable-pie', linking instead
+doesn't, because '-pie' flag is passed to LDFLAGS uncoditionally.
+
+So add '-pie' flag only if CONFIG_PIE=yes.
+
+Signed-off-by: Giulio Benetti 
+---
+ Makefile | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 41783b546..4e5a947a3 100644
+--- a/Makefile
++++ b/Makefile
+@@ -62,7 +62,10 @@ LDFLAGS += -ldl -lm
+ else
+ LDFLAGS += -ldl -lpthread -lm
+ endif
+-LDFLAGS += -pie -Wl,-z,now
++ifeq ($(CONFIG_PIE),yes)
++LDFLAGS += -pie
++endif
++LDFLAGS += -Wl,-z,now
+ ifeq ($(CONFIG_LIBICONV),yes)
+ LDFLAGS += -liconv
+ endif
+-- 
+2.17.1
+
diff --git a/buildroot/package/tvheadend/tvheadend.mk b/buildroot/package/tvheadend/tvheadend.mk
index e92c11108..b192a33d4 100644
--- a/buildroot/package/tvheadend/tvheadend.mk
+++ b/buildroot/package/tvheadend/tvheadend.mk
@@ -94,6 +94,10 @@ else
 TVHEADEND_CONF_OPTS += --disable-pcre
 endif
 
+ifeq ($(BR2_TOOLCHAIN_SUPPORTS_PIE),)
+TVHEADEND_CONF_OPTS += --disable-pie
+endif
+
 TVHEADEND_DEPENDENCIES += dtv-scan-tables
 
 # The tvheadend build system expects the transponder data to be present inside
diff --git a/buildroot/package/tz/tz.mk b/buildroot/package/tz/tz.mk
index 1e797046d..135726c2c 100644
--- a/buildroot/package/tz/tz.mk
+++ b/buildroot/package/tz/tz.mk
@@ -8,6 +8,16 @@ TZ_DEPENDENCIES = host-tzdata host-tzdump
 TZ_LICENSE = Public domain
 
 TZ_LOCALTIME = $(call qstrip,$(BR2_TARGET_LOCALTIME))
+ifneq ($(TZ_LOCALTIME),)
+define TZ_SET_LOCALTIME
+	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) ]; then \
+		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
+			"$(TZ_LOCALTIME)"; \
+		exit 1; \
+	fi
+	ln -sf ../usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) $(TARGET_DIR)/etc/TZ
+endef
+endif
 
 define TZ_BUILD_CMDS
 	(cd $(HOST_DIR)/share/zoneinfo/posix/; \
@@ -25,12 +35,7 @@ define TZ_INSTALL_TARGET_CMDS
 		$(TARGET_DIR)/usr/share/zoneinfo/iso3166.tab
 	mkdir -p $(TARGET_DIR)/usr/share/zoneinfo/uclibc
 	cp -a $(@D)/output/* $(TARGET_DIR)/usr/share/zoneinfo/uclibc
-	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) ]; then \
-		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
-			"$(TZ_LOCALTIME)"; \
-		exit 1; \
-	fi
-	ln -sf ../usr/share/zoneinfo/uclibc/$(TZ_LOCALTIME) $(TARGET_DIR)/etc/TZ
+	$(TZ_SET_LOCALTIME)
 endef
 
 $(eval $(generic-package))
diff --git a/buildroot/package/tzdata/tzdata.mk b/buildroot/package/tzdata/tzdata.mk
index e20c94620..75fa5eb67 100644
--- a/buildroot/package/tzdata/tzdata.mk
+++ b/buildroot/package/tzdata/tzdata.mk
@@ -25,6 +25,17 @@ TZDATA_ZONELIST = $(call qstrip,$(BR2_TARGET_TZ_ZONELIST))
 endif
 
 TZDATA_LOCALTIME = $(call qstrip,$(BR2_TARGET_LOCALTIME))
+ifneq ($(TZDATA_LOCALTIME),)
+define TZDATA_SET_LOCALTIME
+	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/$(TZDATA_LOCALTIME) ]; then \
+		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
+			"$(TZDATA_LOCALTIME)"; \
+		exit 1; \
+	fi
+	ln -sf ../usr/share/zoneinfo/$(TZDATA_LOCALTIME) $(TARGET_DIR)/etc/localtime
+	echo "$(TZDATA_LOCALTIME)" >$(TARGET_DIR)/etc/timezone
+endef
+endif
 
 # No need to extract for target, we're using the host-installed files
 TZDATA_EXTRACT_CMDS =
@@ -36,13 +47,7 @@ define TZDATA_INSTALL_TARGET_CMDS
 	for zone in posix/*; do \
 	    ln -sfn "$${zone}" "$${zone##*/}"; \
 	done
-	if [ ! -f $(TARGET_DIR)/usr/share/zoneinfo/$(TZDATA_LOCALTIME) ]; then \
-		printf "Error: '%s' is not a valid timezone, check your BR2_TARGET_LOCALTIME setting\n" \
-			"$(TZDATA_LOCALTIME)"; \
-		exit 1; \
-	fi
-	ln -sf ../usr/share/zoneinfo/$(TZDATA_LOCALTIME) $(TARGET_DIR)/etc/localtime
-	echo "$(TZDATA_LOCALTIME)" >$(TARGET_DIR)/etc/timezone
+	$(TZDATA_SET_LOCALTIME)
 endef
 
 define HOST_TZDATA_BUILD_CMDS
diff --git a/buildroot/package/uclibc/0004-sparc-remove-asm-constraint.patch b/buildroot/package/uclibc/0004-sparc-remove-asm-constraint.patch
new file mode 100644
index 000000000..2fbe8cda5
--- /dev/null
+++ b/buildroot/package/uclibc/0004-sparc-remove-asm-constraint.patch
@@ -0,0 +1,40 @@
+From 75a1a2a9fec8a310a18ff7d63ead95f3a0d1b11b Mon Sep 17 00:00:00 2001
+From: Romain Naour 
+Date: Fri, 24 May 2019 12:42:04 +0200
+Subject: [PATCH] sparc: remove asm constraint
+
+uClibc-ng don't build with gcc 9.1 [1] due to a new check that
+"catch illegal asm constraint usage" [2].
+gcc 9.1 print this error:
+"invalid hard register usage between earlyclobber operand and input operand"
+The asm constraint is present in uClibc since it support sparc (back in 2002)[3].
+Note: There is no such constraint is Glibc counterpart code [4].
+[1] https://gitlab.com/kubu93/toolchains-builder/-/jobs/205435757
+[2] https://github.com/gcc-mirror/gcc/commit/b782636f28f5c378897c238081d28d7a4a6ca578
+[3] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/commit/?id=3b6d086531102b6d09ce852feb1e370d5dca3ce9
+[4]
++https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/sparc/sysdep.h;h=981b2a26b7a91093f821c97876
++e55bc4be2d9f8a;hb=HEAD
+
+(cherry picked from commit c2eaf6c30d930b65a8bcf5f912ef8873a6f4eb20)
+Signed-off-by: Romain Naour 
+---
+ libc/sysdeps/linux/sparc/bits/syscalls.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/libc/sysdeps/linux/sparc/bits/syscalls.h b/libc/sysdeps/linux/sparc/bits/syscalls.h
+index 75af7a157..28edc0568 100644
+--- a/libc/sysdeps/linux/sparc/bits/syscalls.h
++++ b/libc/sysdeps/linux/sparc/bits/syscalls.h
+@@ -33,7 +33,7 @@
+             register long __g1 __asm__("g1") = sys_num;     \
+             LOAD_ARGS_##nr(args)                            \
+             __asm__ __volatile__( __SYSCALL_STRING          \
+-                : "=r" (__res), "=&r" (__o0)                \
++                : "=r" (__res), "=r" (__o0)                \
+                 : "1" (__o0) ASM_ARGS_##nr, "r" (__g1)     \
+                 : __SYSCALL_CLOBBERS );                                   \
+         }                                                   \
+-- 
+2.21.0
+
diff --git a/buildroot/package/uclibc/0005-PowerPC-sync-with-termios-fix-from-glibc.patch b/buildroot/package/uclibc/0005-PowerPC-sync-with-termios-fix-from-glibc.patch
new file mode 100644
index 000000000..f933d43dc
--- /dev/null
+++ b/buildroot/package/uclibc/0005-PowerPC-sync-with-termios-fix-from-glibc.patch
@@ -0,0 +1,172 @@
+From 67b3b894517893e94b9eed46f38c5d631b87a200 Mon Sep 17 00:00:00 2001
+From: Adhemerval Zanella 
+Date: Tue, 20 Aug 2019 23:16:18 +0300
+Subject: [PATCH] PowerPC: Fix termios definitions
+
+This patch fixes the incorrect guard by __USE_MISC of struct winsize and
+struct termio in powerpc termios header.  Current states leads to build
+failures if the program defines _XOPEN_SOURCE, but not _DEFAULT_SOURCE
+or either _BSD_SOURCE or _SVID_SOURCE.  Without any definition,
+__USE_MISC will not be defined and neither the struct definitions.
+
+This patch copies the default Linux ioctl-types.h by adjusting only the
+character control field (c_cc) size in struct termio.
+
+Signed-off-by: Vadim Kochan 
+[Vadim: adopted for uclibc ]
+---
+ libc/sysdeps/linux/powerpc/bits/ioctl-types.h | 74 ++++++++++++++++++-
+ libc/sysdeps/linux/powerpc/bits/termios.h     | 48 ------------
+ 2 files changed, 73 insertions(+), 49 deletions(-)
+
+diff --git a/libc/sysdeps/linux/powerpc/bits/ioctl-types.h b/libc/sysdeps/linux/powerpc/bits/ioctl-types.h
+index 87b8265af..926061fa8 100644
+--- a/libc/sysdeps/linux/powerpc/bits/ioctl-types.h
++++ b/libc/sysdeps/linux/powerpc/bits/ioctl-types.h
+@@ -1,5 +1,77 @@
++/* Structure types for pre-termios terminal ioctls.  Linux/powerpc version.
++   Copyright (C) 2014-2019 Free Software Foundation, Inc.
++   This file is part of the GNU C Library.
++
++   The GNU C Library is free software; you can redistribute it and/or
++   modify it under the terms of the GNU Lesser General Public
++   License as published by the Free Software Foundation; either
++   version 2.1 of the License, or (at your option) any later version.
++
++   The GNU C Library is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++   Lesser General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General Public
++   License along with the GNU C Library; if not, see
++   .  */
++
+ #ifndef _SYS_IOCTL_H
+ # error "Never use  directly; include  instead."
+ #endif
+ 
+-#include 
++/* Get definition of constants for use with `ioctl'.  */
++#include 
++
++
++struct winsize
++  {
++    unsigned short int ws_row;
++    unsigned short int ws_col;
++    unsigned short int ws_xpixel;
++    unsigned short int ws_ypixel;
++  };
++
++#define NCC 10
++struct termio
++  {
++    unsigned short int c_iflag;		/* input mode flags */
++    unsigned short int c_oflag;		/* output mode flags */
++    unsigned short int c_cflag;		/* control mode flags */
++    unsigned short int c_lflag;		/* local mode flags */
++    unsigned char c_line;		/* line discipline */
++    unsigned char c_cc[NCC];		/* control characters */
++};
++
++/* modem lines */
++#define TIOCM_LE	0x001
++#define TIOCM_DTR	0x002
++#define TIOCM_RTS	0x004
++#define TIOCM_ST	0x008
++#define TIOCM_SR	0x010
++#define TIOCM_CTS	0x020
++#define TIOCM_CAR	0x040
++#define TIOCM_RNG	0x080
++#define TIOCM_DSR	0x100
++#define TIOCM_CD	TIOCM_CAR
++#define TIOCM_RI	TIOCM_RNG
++
++/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
++
++/* line disciplines */
++#define N_TTY		0
++#define N_SLIP		1
++#define N_MOUSE		2
++#define N_PPP		3
++#define N_STRIP		4
++#define N_AX25		5
++#define N_X25		6	/* X.25 async  */
++#define N_6PACK		7
++#define N_MASC		8	/* Mobitex module  */
++#define N_R3964		9	/* Simatic R3964 module  */
++#define N_PROFIBUS_FDL	10	/* Profibus  */
++#define N_IRDA		11	/* Linux IR  */
++#define N_SMSBLOCK	12	/* SMS block mode  */
++#define N_HDLC		13	/* synchronous HDLC  */
++#define N_SYNC_PPP	14	/* synchronous PPP  */
++#define	N_HCI		15	/* Bluetooth HCI UART  */
+diff --git a/libc/sysdeps/linux/powerpc/bits/termios.h b/libc/sysdeps/linux/powerpc/bits/termios.h
+index ffd99a5e2..83380685f 100644
+--- a/libc/sysdeps/linux/powerpc/bits/termios.h
++++ b/libc/sysdeps/linux/powerpc/bits/termios.h
+@@ -256,23 +256,6 @@ struct ltchars {
+ #define TIOCPKT_NOSTOP		16
+ #define TIOCPKT_DOSTOP		32
+ 
+-struct winsize {
+-	unsigned short ws_row;
+-	unsigned short ws_col;
+-	unsigned short ws_xpixel;
+-	unsigned short ws_ypixel;
+-};
+-
+-#define NCC 10
+-struct termio {
+-	unsigned short c_iflag;		/* input mode flags */
+-	unsigned short c_oflag;		/* output mode flags */
+-	unsigned short c_cflag;		/* control mode flags */
+-	unsigned short c_lflag;		/* local mode flags */
+-	unsigned char c_line;		/* line discipline */
+-	unsigned char c_cc[NCC];	/* control characters */
+-};
+-
+ /* c_cc characters */
+ #define _VINTR	0
+ #define _VQUIT	1
+@@ -285,36 +268,5 @@ struct termio {
+ #define _VEOL2	8
+ #define _VSWTC	9
+ 
+-/* modem lines */
+-#define TIOCM_LE	0x001
+-#define TIOCM_DTR	0x002
+-#define TIOCM_RTS	0x004
+-#define TIOCM_ST	0x008
+-#define TIOCM_SR	0x010
+-#define TIOCM_CTS	0x020
+-#define TIOCM_CAR	0x040
+-#define TIOCM_RNG	0x080
+-#define TIOCM_DSR	0x100
+-#define TIOCM_CD	TIOCM_CAR
+-#define TIOCM_RI	TIOCM_RNG
+-
+ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+ #define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+-
+-/* line disciplines */
+-#define N_TTY		0
+-#define N_SLIP		1
+-#define N_MOUSE		2
+-#define N_PPP		3
+-#define N_STRIP		4
+-#define N_AX25		5
+-#define N_X25		6	/* X.25 async  */
+-#define N_6PACK		7
+-#define N_MASC		8	/* Mobitex module  */
+-#define N_R3964		9	/* Simatic R3964 module  */
+-#define N_PROFIBUS_FDL	10	/* Profibus  */
+-#define N_IRDA		11	/* Linux IR  */
+-#define N_SMSBLOCK	12	/* SMS block mode  */
+-#define N_HDLC		13	/* synchronous HDLC  */
+-#define N_SYNC_PPP	14	/* synchronous PPP  */
+-#define	N_HCI		15	/* Bluetooth HCI UART  */
+-- 
+2.22.0
+
diff --git a/buildroot/package/unscd/unscd.hash b/buildroot/package/unscd/unscd.hash
index ab8ffdc0c..671149fda 100644
--- a/buildroot/package/unscd/unscd.hash
+++ b/buildroot/package/unscd/unscd.hash
@@ -1,2 +1,2 @@
 # Locally computed:
-sha256	4c1f83dcd120469fceef749050cb29fa666fa4666bd308dfe92e933a4c200d55	nscd-0.52.c
+sha256  9078255b2b9c344d9a0c3333ce23dda9d745f158dde0ea2244a8c56ba93f7a40  nscd-0.53.c
diff --git a/buildroot/package/unscd/unscd.mk b/buildroot/package/unscd/unscd.mk
index 36f2de271..c79ec4400 100644
--- a/buildroot/package/unscd/unscd.mk
+++ b/buildroot/package/unscd/unscd.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-UNSCD_VERSION = 0.52
+UNSCD_VERSION = 0.53
 UNSCD_SOURCE = nscd-$(UNSCD_VERSION).c
 UNSCD_SITE = http://busybox.net/~vda/unscd
 UNSCD_LICENSE = GPL-2.0
diff --git a/buildroot/package/unzip/unzip.hash b/buildroot/package/unzip/unzip.hash
index fbf2615ad..a10778a46 100644
--- a/buildroot/package/unzip/unzip.hash
+++ b/buildroot/package/unzip/unzip.hash
@@ -13,3 +13,7 @@ sha256 ea04cfc8b7ca3b3c03117da0d891870b8c542d26188ef5593fd7e479f4f29f4e 17-resto
 sha256 1872ffdd4d82edd7b1e62c469642bf16a1ca12dd26d41bd3f0b44f0f7602eb63 18-cve-2014-9913-unzip-buffer-overflow.patch
 sha256 60840ea8f5d11a276972fb5b43652cdd49a9ed93b2cc0586ad309bf52104b012 19-cve-2016-9844-zipinfo-buffer-overflow.patch
 sha256 4eabc3faeddd56ebc3d5053486b61f8758d840902725fd555d3472cffb094437 20-cve-2018-1000035-unzip-buffer-overflow.patch
+sha256 df3b0eeea8dcc161a2565e306b5dda13d27de43145e198baaf0eab822321ee7e 21-fix-warning-messages-on-big-files.patch
+sha256 2cf5a89e921da99e883bcde0ea03e2c77ae9185f57efaf35e7d43bc24353cfdc 22-cve-2019-13232-fix-bug-in-undefer-input.patch
+sha256 c8e82c80fc7760f90567118a465e4cfa1b8e5d0a5723f9c70e3d21247e550615 23-cve-2019-13232-zip-bomb-with-overlapped-entries.patch
+sha256 37ba0bea723beeb22670babda18bd980368cc6591bc7bd9caa04f62692c7e5ac 24-cve-2019-13232-do-not-raise-alert-for-misplaced-central-directory.patch
diff --git a/buildroot/package/unzip/unzip.mk b/buildroot/package/unzip/unzip.mk
index 43e90125e..1d972055d 100644
--- a/buildroot/package/unzip/unzip.mk
+++ b/buildroot/package/unzip/unzip.mk
@@ -11,18 +11,22 @@ UNZIP_LICENSE = Info-ZIP
 UNZIP_LICENSE_FILES = LICENSE
 
 UNZIP_PATCH = \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/07-increase-size-of-cfactorstr.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/08-allow-greater-hostver-values.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/09-cve-2014-8139-crc-overflow.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/10-cve-2014-8140-test-compr-eb.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/11-cve-2014-8141-getzip64data.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/12-cve-2014-9636-test-compr-eb.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/14-cve-2015-7696.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/15-cve-2015-7697.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/16-fix-integer-underflow-csiz-decrypted.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/17-restore-unix-timestamps-accurately.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/18-cve-2014-9913-unzip-buffer-overflow.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/19-cve-2016-9844-zipinfo-buffer-overflow.patch \
-	https://sources.debian.org/data/main/u/unzip/6.0-22/debian/patches/20-cve-2018-1000035-unzip-buffer-overflow.patch
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/07-increase-size-of-cfactorstr.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/08-allow-greater-hostver-values.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/09-cve-2014-8139-crc-overflow.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/10-cve-2014-8140-test-compr-eb.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/11-cve-2014-8141-getzip64data.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/12-cve-2014-9636-test-compr-eb.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/14-cve-2015-7696.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/15-cve-2015-7697.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/16-fix-integer-underflow-csiz-decrypted.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/17-restore-unix-timestamps-accurately.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/18-cve-2014-9913-unzip-buffer-overflow.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/19-cve-2016-9844-zipinfo-buffer-overflow.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/20-cve-2018-1000035-unzip-buffer-overflow.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/21-fix-warning-messages-on-big-files.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/22-cve-2019-13232-fix-bug-in-undefer-input.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/23-cve-2019-13232-zip-bomb-with-overlapped-entries.patch \
+	https://sources.debian.org/data/main/u/unzip/6.0-25/debian/patches/24-cve-2019-13232-do-not-raise-alert-for-misplaced-central-directory.patch
 
 $(eval $(cmake-package))
diff --git a/buildroot/package/usbmount/Config.in b/buildroot/package/usbmount/Config.in
index f87bd911f..8ce0ce761 100644
--- a/buildroot/package/usbmount/Config.in
+++ b/buildroot/package/usbmount/Config.in
@@ -7,7 +7,7 @@ config BR2_PACKAGE_USBMOUNT
 	  devices when they are plugged in, and unmounts them when
 	  they are removed.
 
-	  http://usbmount.alioth.debian.org/
+	  https://wiki.debian.org/usbmount
 
 comment "usbmount requires udev to be enabled"
 	depends on !BR2_PACKAGE_HAS_UDEV
diff --git a/buildroot/package/util-linux/util-linux.mk b/buildroot/package/util-linux/util-linux.mk
index c176d364c..b17c0e9b7 100644
--- a/buildroot/package/util-linux/util-linux.mk
+++ b/buildroot/package/util-linux/util-linux.mk
@@ -11,7 +11,7 @@ UTIL_LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/util-linux/v$(UTIL_LINUX_VERS
 
 # README.licensing claims that some files are GPL-2.0 only, but this is not true.
 # Some files are GPL-3.0+ but only in tests. rfkill uses an ISC-style license.
-UTIL_LINUX_LICENSE = GPL-2.0+, BSD-4-Clause, LGPL-2.1+ (libblkid, libfdisk, libmount), BSD-3-Clause (libuuid) ISC (rfkill)
+UTIL_LINUX_LICENSE = GPL-2.0+, BSD-4-Clause, LGPL-2.1+ (libblkid, libfdisk, libmount), BSD-3-Clause (libuuid), ISC (rfkill)
 UTIL_LINUX_LICENSE_FILES = README.licensing \
 	Documentation/licenses/COPYING.BSD-3-Clause \
 	Documentation/licenses/COPYING.BSD-4-Clause-UC \
@@ -232,9 +232,9 @@ endif
 # Install PAM configuration files
 ifeq ($(BR2_PACKAGE_UTIL_LINUX_SU)$(BR2_PACKAGE_LINUX_PAM),yy)
 define UTIL_LINUX_INSTALL_PAMFILES
-	$(INSTALL) -m 0644 package/util-linux/su.pam \
+	$(INSTALL) -D -m 0644 package/util-linux/su.pam \
 		$(TARGET_DIR)/etc/pam.d/su
-	$(INSTALL) -m 0644 package/util-linux/su.pam \
+	$(INSTALL) -D -m 0644 package/util-linux/su.pam \
 		$(TARGET_DIR)/etc/pam.d/su-l
 	$(UTIL_LINUX_SELINUX_PAMFILES_TWEAK)
 endef
diff --git a/buildroot/package/vlc/vlc.hash b/buildroot/package/vlc/vlc.hash
index e2c5fecfa..d1d3e45b0 100644
--- a/buildroot/package/vlc/vlc.hash
+++ b/buildroot/package/vlc/vlc.hash
@@ -1,9 +1,9 @@
-# From http://download.videolan.org/pub/videolan/vlc/3.0.6/vlc-3.0.6.tar.xz.sha256
-sha256 18c16d4be0f34861d0aa51fbd274fb87f0cab3b7119757ead93f3db3a1f27ed3 vlc-3.0.6.tar.xz
-# From http://download.videolan.org/pub/videolan/vlc/3.0.6/vlc-3.0.6.tar.xz.sha1
-sha1 b35168c1811b07844d861311bd0f2194f4bb82ac vlc-3.0.6.tar.xz
-# From http://download.videolan.org/pub/videolan/vlc/3.0.6/vlc-3.0.6.tar.xz.md5
-md5 4ff71d262e070fd19f86a1c3542c7b4e vlc-3.0.6.tar.xz
+# From http://download.videolan.org/pub/videolan/vlc/3.0.8/vlc-3.0.8.tar.xz.sha256
+sha256 e0149ef4a20a19b9ecd87309c2d27787ee3f47dfd47c6639644bc1f6fd95bdf6 vlc-3.0.8.tar.xz
+# From http://download.videolan.org/pub/videolan/vlc/3.0.8/vlc-3.0.8.tar.xz.sha1
+sha1 424a9795e051c198e7fa28107b15809ee6820d43 vlc-3.0.8.tar.xz
+# From http://download.videolan.org/pub/videolan/vlc/3.0.8/vlc-3.0.8.tar.xz.md5
+md5 744442ec0c145453ea1d257914c8072e vlc-3.0.8.tar.xz
 # Locally computed
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
 sha256 dc626520dcd53a22f727af3ee42c770e56c97a64fe3adb063799d8ab032fe551  COPYING.LIB
diff --git a/buildroot/package/vlc/vlc.mk b/buildroot/package/vlc/vlc.mk
index 8dbaf86a0..ae12e89b8 100644
--- a/buildroot/package/vlc/vlc.mk
+++ b/buildroot/package/vlc/vlc.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-VLC_VERSION = 3.0.6
+VLC_VERSION = 3.0.8
 VLC_SITE = https://get.videolan.org/vlc/$(VLC_VERSION)
 VLC_SOURCE = vlc-$(VLC_VERSION).tar.xz
 VLC_LICENSE = GPL-2.0+, LGPL-2.1+
diff --git a/buildroot/package/vte/vte.mk b/buildroot/package/vte/vte.mk
index 90853cb4a..7332a1ae0 100644
--- a/buildroot/package/vte/vte.mk
+++ b/buildroot/package/vte/vte.mk
@@ -7,7 +7,7 @@
 VTE_VERSION = 0.48.3
 VTE_SOURCE = vte-$(VTE_VERSION).tar.xz
 VTE_SITE = http://ftp.gnome.org/pub/gnome/sources/vte/0.48
-VTE_DEPENDENCIES = host-pkgconf libgtk3 libxml2 pcre2
+VTE_DEPENDENCIES = host-intltool host-pkgconf libgtk3 libxml2 pcre2
 VTE_LICENSE = LGPL-2.1+
 VTE_LICENSE_FILES = COPYING
 VTE_CONF_OPTS += --disable-introspection --without-gnutls --disable-vala
diff --git a/buildroot/package/vtun/vtun.mk b/buildroot/package/vtun/vtun.mk
index 86d452c0c..35b0ddedb 100644
--- a/buildroot/package/vtun/vtun.mk
+++ b/buildroot/package/vtun/vtun.mk
@@ -8,7 +8,7 @@ VTUN_VERSION = 3.0.4
 VTUN_SITE = http://downloads.sourceforge.net/project/vtun/vtun/$(VTUN_VERSION)
 VTUN_LICENSE = GPL-2.0+ with OpenSSL exception
 VTUN_LICENSE_FILES = README.OpenSSL
-VTUN_DEPENDENCIES = host-bison host-flex zlib lzo openssl
+VTUN_DEPENDENCIES = host-bison host-flex host-pkgconf zlib lzo openssl
 VTUN_AUTORECONF = YES
 
 VTUN_CONF_OPTS = \
@@ -19,4 +19,8 @@ VTUN_CONF_OPTS = \
 # Assumes old-style gcc inline symbol visibility rules
 VTUN_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -std=gnu89"
 
+# configure.in forgets to link to dependent libraries of openssl breaking static
+# linking
+VTUN_CONF_ENV += LIBS=`$(PKG_CONFIG_HOST_BINARY) --libs openssl`
+
 $(eval $(autotools-package))
diff --git a/buildroot/package/w_scan/Config.in b/buildroot/package/w_scan/Config.in
index 01dbbae12..d5471200a 100644
--- a/buildroot/package/w_scan/Config.in
+++ b/buildroot/package/w_scan/Config.in
@@ -11,4 +11,4 @@ config BR2_PACKAGE_W_SCAN
 	  capable of creating channels.conf files (in different output
 	  formats !) as well as initial tuning data for scan.
 
-	  http://wirbel.htpc-forum.de/w_scan/index_en.html
+	  https://www.gen2vdr.de/wirbel/w_scan/index2.html
diff --git a/buildroot/package/wavpack/0001-fix-Github-issue-19-new-dependency-on-wchar-t-by-removing.patch b/buildroot/package/wavpack/0001-fix-Github-issue-19-new-dependency-on-wchar-t-by-removing.patch
deleted file mode 100644
index e5faf9122..000000000
--- a/buildroot/package/wavpack/0001-fix-Github-issue-19-new-dependency-on-wchar-t-by-removing.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 876fc3f3907e871d0938ac6c8c5252f5f31abd1f Mon Sep 17 00:00:00 2001
-From: David Bryant 
-Date: Thu, 16 Feb 2017 17:11:12 -0800
-Subject: [PATCH] fix GitHub issue #19 (new dependency on wchar_t) by removing
- dependency
-
-[Upstream commit: https://github.com/dbry/WavPack/commit/876fc3f3907e871d0938ac6c8c5252f5f31abd1f]
-Signed-off-by: Thomas Petazzoni 
----
- cli/import_id3.c | 10 +++++-----
- cli/wvtag.c      |  2 ++
- 2 files changed, 7 insertions(+), 5 deletions(-)
-
-diff --git a/cli/import_id3.c b/cli/import_id3.c
-index 51e54ee..fc30aeb 100644
---- a/cli/import_id3.c
-+++ b/cli/import_id3.c
-@@ -34,7 +34,7 @@ static struct {
- 
- #define NUM_TEXT_TAG_ITEMS (sizeof (text_tag_table) / sizeof (text_tag_table [0]))
- 
--static int WideCharToUTF8 (const wchar_t *Wide, unsigned char *pUTF8, int len);
-+static int WideCharToUTF8 (const uint16_t *Wide, unsigned char *pUTF8, int len);
- static void Latin1ToUTF8 (void *string, int len);
- 
- // Import specified ID3v2.3 tag. The WavPack context accepts the tag items, and can be
-@@ -163,7 +163,7 @@ int ImportID3v2 (WavpackContext *wpc, unsigned char *tag_data, int tag_size, cha
-             }
-             else if (frame_body [0] == 1 && frame_size > 2 && frame_body [1] == 0xFF && frame_body [2] == 0xFE) {
-                 int nchars = (frame_size - 3) / 2;
--                wchar_t *wide_string = malloc ((nchars + 1) * sizeof (wchar_t));
-+                uint16_t *wide_string = malloc ((nchars + 1) * sizeof (uint16_t));
-                 unsigned char *fp = frame_body + 3;
- 
-                 utf8_string = malloc ((nchars + 1) * 3);
-@@ -297,9 +297,9 @@ int ImportID3v2 (WavpackContext *wpc, unsigned char *tag_data, int tag_size, cha
- // may be less than the number of characters in the wide string if the buffer
- // length is exceeded.
- 
--static int WideCharToUTF8 (const wchar_t *Wide, unsigned char *pUTF8, int len)
-+static int WideCharToUTF8 (const uint16_t *Wide, unsigned char *pUTF8, int len)
- {
--    const wchar_t *pWide = Wide;
-+    const uint16_t *pWide = Wide;
-     int outndx = 0;
- 
-     while (*pWide) {
-@@ -335,7 +335,7 @@ static int WideCharToUTF8 (const wchar_t *Wide, unsigned char *pUTF8, int len)
- static void Latin1ToUTF8 (void *string, int len)
- {
-     int max_chars = (int) strlen (string);
--    wchar_t *temp = (wchar_t *) malloc ((max_chars + 1) * 2);
-+    uint16_t *temp = (uint16_t *) malloc ((max_chars + 1) * sizeof (uint16_t));
- 
-     MultiByteToWideChar (28591, 0, string, -1, temp, max_chars + 1);
-     WideCharToUTF8 (temp, (unsigned char *) string, len);
-diff --git a/cli/wvtag.c b/cli/wvtag.c
-index 6e6512a..45e621e 100644
---- a/cli/wvtag.c
-+++ b/cli/wvtag.c
-@@ -1344,7 +1344,9 @@ static void dump_UTF8_string (char *string, FILE *dst)
- // resulting string will not fit in the specified buffer size then it is
- // truncated.
- 
-+#if defined (_WIN32)
- static int UTF8ToWideChar (const unsigned char *pUTF8, wchar_t *pWide);
-+#endif
- 
- static void UTF8ToAnsi (char *string, int len)
- {
diff --git a/buildroot/package/wavpack/0002-issue-27-do-not-overwrite-stack-on-corrupt-RF64-file.patch b/buildroot/package/wavpack/0002-issue-27-do-not-overwrite-stack-on-corrupt-RF64-file.patch
deleted file mode 100644
index bda00999b..000000000
--- a/buildroot/package/wavpack/0002-issue-27-do-not-overwrite-stack-on-corrupt-RF64-file.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From d5bf76b5a88d044a1be1d5656698e3ba737167e5 Mon Sep 17 00:00:00 2001
-From: David Bryant 
-Date: Sun, 4 Feb 2018 11:28:15 -0800
-Subject: [PATCH] issue #27, do not overwrite stack on corrupt RF64 file
-
-Fixes CVE-2018-6767
-
-Signed-off-by: Peter Korsgaard 
----
- cli/riff.c | 39 ++++++++++++++++++++++++++++++++-------
- 1 file changed, 32 insertions(+), 7 deletions(-)
-
-diff --git a/cli/riff.c b/cli/riff.c
-index 8b1af45..de98c1e 100644
---- a/cli/riff.c
-+++ b/cli/riff.c
-@@ -42,6 +42,7 @@ typedef struct {
- 
- #pragma pack(pop)
- 
-+#define CS64ChunkFormat "4D"
- #define DS64ChunkFormat "DDDL"
- 
- #define WAVPACK_NO_ERROR    0
-@@ -101,13 +102,13 @@ int ParseRiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpack
- 
-         if (!strncmp (chunk_header.ckID, "ds64", 4)) {
-             if (chunk_header.ckSize < sizeof (DS64Chunk) ||
--                !DoReadFile (infile, &ds64_chunk, chunk_header.ckSize, &bcount) ||
--                bcount != chunk_header.ckSize) {
-+                !DoReadFile (infile, &ds64_chunk, sizeof (DS64Chunk), &bcount) ||
-+                bcount != sizeof (DS64Chunk)) {
-                     error_line ("%s is not a valid .WAV file!", infilename);
-                     return WAVPACK_SOFT_ERROR;
-             }
-             else if (!(config->qmode & QMODE_NO_STORE_WRAPPER) &&
--                !WavpackAddWrapper (wpc, &ds64_chunk, chunk_header.ckSize)) {
-+                !WavpackAddWrapper (wpc, &ds64_chunk, sizeof (DS64Chunk))) {
-                     error_line ("%s", WavpackGetErrorMessage (wpc));
-                     return WAVPACK_SOFT_ERROR;
-             }
-@@ -315,10 +316,11 @@ int ParseRiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpack
- 
- int WriteRiffHeader (FILE *outfile, WavpackContext *wpc, int64_t total_samples, int qmode)
- {
--    int do_rf64 = 0, write_junk = 1;
-+    int do_rf64 = 0, write_junk = 1, table_length = 0;
-     ChunkHeader ds64hdr, datahdr, fmthdr;
-     RiffChunkHeader riffhdr;
-     DS64Chunk ds64_chunk;
-+    CS64Chunk cs64_chunk;
-     JunkChunk junkchunk;
-     WaveHeader wavhdr;
-     uint32_t bcount;
-@@ -380,6 +382,7 @@ int WriteRiffHeader (FILE *outfile, WavpackContext *wpc, int64_t total_samples,
-     strncpy (riffhdr.formType, "WAVE", sizeof (riffhdr.formType));
-     total_riff_bytes = sizeof (riffhdr) + wavhdrsize + sizeof (datahdr) + ((total_data_bytes + 1) & ~(int64_t)1);
-     if (do_rf64) total_riff_bytes += sizeof (ds64hdr) + sizeof (ds64_chunk);
-+    total_riff_bytes += table_length * sizeof (CS64Chunk);
-     if (write_junk) total_riff_bytes += sizeof (junkchunk);
-     strncpy (fmthdr.ckID, "fmt ", sizeof (fmthdr.ckID));
-     strncpy (datahdr.ckID, "data", sizeof (datahdr.ckID));
-@@ -394,11 +397,12 @@ int WriteRiffHeader (FILE *outfile, WavpackContext *wpc, int64_t total_samples,
- 
-     if (do_rf64) {
-         strncpy (ds64hdr.ckID, "ds64", sizeof (ds64hdr.ckID));
--        ds64hdr.ckSize = sizeof (ds64_chunk);
-+        ds64hdr.ckSize = sizeof (ds64_chunk) + (table_length * sizeof (CS64Chunk));
-         CLEAR (ds64_chunk);
-         ds64_chunk.riffSize64 = total_riff_bytes;
-         ds64_chunk.dataSize64 = total_data_bytes;
-         ds64_chunk.sampleCount64 = total_samples;
-+        ds64_chunk.tableLength = table_length;
-         riffhdr.ckSize = (uint32_t) -1;
-         datahdr.ckSize = (uint32_t) -1;
-         WavpackNativeToLittleEndian (&ds64hdr, ChunkHeaderFormat);
-@@ -409,6 +413,14 @@ int WriteRiffHeader (FILE *outfile, WavpackContext *wpc, int64_t total_samples,
-         datahdr.ckSize = (uint32_t) total_data_bytes;
-     }
- 
-+    // this "table" is just a dummy placeholder for testing (normally not written)
-+
-+    if (table_length) {
-+        strncpy (cs64_chunk.ckID, "dmmy", sizeof (cs64_chunk.ckID));
-+        cs64_chunk.chunkSize64 = 12345678;
-+        WavpackNativeToLittleEndian (&cs64_chunk, CS64ChunkFormat);
-+    }
-+
-     // write the RIFF chunks up to just before the data starts
- 
-     WavpackNativeToLittleEndian (&riffhdr, ChunkHeaderFormat);
-@@ -418,8 +430,21 @@ int WriteRiffHeader (FILE *outfile, WavpackContext *wpc, int64_t total_samples,
- 
-     if (!DoWriteFile (outfile, &riffhdr, sizeof (riffhdr), &bcount) || bcount != sizeof (riffhdr) ||
-         (do_rf64 && (!DoWriteFile (outfile, &ds64hdr, sizeof (ds64hdr), &bcount) || bcount != sizeof (ds64hdr))) ||
--        (do_rf64 && (!DoWriteFile (outfile, &ds64_chunk, sizeof (ds64_chunk), &bcount) || bcount != sizeof (ds64_chunk))) ||
--        (write_junk && (!DoWriteFile (outfile, &junkchunk, sizeof (junkchunk), &bcount) || bcount != sizeof (junkchunk))) ||
-+        (do_rf64 && (!DoWriteFile (outfile, &ds64_chunk, sizeof (ds64_chunk), &bcount) || bcount != sizeof (ds64_chunk)))) {
-+            error_line ("can't write .WAV data, disk probably full!");
-+            return FALSE;
-+    }
-+
-+    // again, this is normally not written except for testing
-+
-+    while (table_length--)
-+        if (!DoWriteFile (outfile, &cs64_chunk, sizeof (cs64_chunk), &bcount) || bcount != sizeof (cs64_chunk)) {
-+            error_line ("can't write .WAV data, disk probably full!");
-+            return FALSE;
-+        }
-+
-+
-+    if ((write_junk && (!DoWriteFile (outfile, &junkchunk, sizeof (junkchunk), &bcount) || bcount != sizeof (junkchunk))) ||
-         !DoWriteFile (outfile, &fmthdr, sizeof (fmthdr), &bcount) || bcount != sizeof (fmthdr) ||
-         !DoWriteFile (outfile, &wavhdr, wavhdrsize, &bcount) || bcount != wavhdrsize ||
-         !DoWriteFile (outfile, &datahdr, sizeof (datahdr), &bcount) || bcount != sizeof (datahdr)) {
--- 
-2.11.0
-
diff --git a/buildroot/package/wavpack/0003-issue-28-do-not-overwrite-heap-on-corrupt-DSDIFF-fil.patch b/buildroot/package/wavpack/0003-issue-28-do-not-overwrite-heap-on-corrupt-DSDIFF-fil.patch
deleted file mode 100644
index 950877b03..000000000
--- a/buildroot/package/wavpack/0003-issue-28-do-not-overwrite-heap-on-corrupt-DSDIFF-fil.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 36a24c7881427d2e1e4dc1cef58f19eee0d13aec Mon Sep 17 00:00:00 2001
-From: David Bryant 
-Date: Sat, 10 Feb 2018 16:01:39 -0800
-Subject: [PATCH] issue #28, do not overwrite heap on corrupt DSDIFF file
-
-Fixes CVE-2018-7253
-
-Signed-off-by: Peter Korsgaard 
----
- cli/dsdiff.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
-diff --git a/cli/dsdiff.c b/cli/dsdiff.c
-index 410dc1c..c016df9 100644
---- a/cli/dsdiff.c
-+++ b/cli/dsdiff.c
-@@ -153,7 +153,17 @@ int ParseDsdiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpa
-                 error_line ("dsdiff file version = 0x%08x", version);
-         }
-         else if (!strncmp (dff_chunk_header.ckID, "PROP", 4)) {
--            char *prop_chunk = malloc ((size_t) dff_chunk_header.ckDataSize);
-+            char *prop_chunk;
-+
-+            if (dff_chunk_header.ckDataSize < 4 || dff_chunk_header.ckDataSize > 1024) {
-+                error_line ("%s is not a valid .DFF file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-+            if (debug_logging_mode)
-+                error_line ("got PROP chunk of %d bytes total", (int) dff_chunk_header.ckDataSize);
-+
-+            prop_chunk = malloc ((size_t) dff_chunk_header.ckDataSize);
- 
-             if (!DoReadFile (infile, prop_chunk, (uint32_t) dff_chunk_header.ckDataSize, &bcount) ||
-                 bcount != dff_chunk_header.ckDataSize) {
--- 
-2.11.0
-
diff --git a/buildroot/package/wavpack/0004-issue-28-fix-buffer-overflows-and-bad-allocs-on-corr.patch b/buildroot/package/wavpack/0004-issue-28-fix-buffer-overflows-and-bad-allocs-on-corr.patch
deleted file mode 100644
index 142e81ff7..000000000
--- a/buildroot/package/wavpack/0004-issue-28-fix-buffer-overflows-and-bad-allocs-on-corr.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 8e3fe45a7bac31d9a3b558ae0079e2d92a04799e Mon Sep 17 00:00:00 2001
-From: David Bryant 
-Date: Sun, 11 Feb 2018 16:37:47 -0800
-Subject: [PATCH] issue #28, fix buffer overflows and bad allocs on corrupt CAF
- files
-
-Fixes CVE-2018-7254
-
-Signed-off-by: Peter Korsgaard 
----
- cli/caff.c | 30 +++++++++++++++++++++++-------
- 1 file changed, 23 insertions(+), 7 deletions(-)
-
-diff --git a/cli/caff.c b/cli/caff.c
-index ae57c4b..6248a71 100644
---- a/cli/caff.c
-+++ b/cli/caff.c
-@@ -89,8 +89,8 @@ typedef struct
- 
- #define CAFChannelDescriptionFormat "LLLLL"
- 
--static const char TMH_full [] = { 1,2,3,13,9,10,5,6,12,14,15,16,17,9,4,18,7,8,19,20,21 };
--static const char TMH_std [] = { 1,2,3,11,8,9,5,6,10,12,13,14,15,7,4,16 };
-+static const char TMH_full [] = { 1,2,3,13,9,10,5,6,12,14,15,16,17,9,4,18,7,8,19,20,21,0 };
-+static const char TMH_std [] = { 1,2,3,11,8,9,5,6,10,12,13,14,15,7,4,16,0 };
- 
- static struct {
-     uint32_t mChannelLayoutTag;     // Core Audio layout, 100 - 146 in high word, num channels in low word
-@@ -274,10 +274,19 @@ int ParseCaffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpack
-             }
-         }
-         else if (!strncmp (caf_chunk_header.mChunkType, "chan", 4)) {
--            CAFChannelLayout *caf_channel_layout = malloc ((size_t) caf_chunk_header.mChunkSize);
-+            CAFChannelLayout *caf_channel_layout;
- 
--            if (caf_chunk_header.mChunkSize < sizeof (CAFChannelLayout) ||
--                !DoReadFile (infile, caf_channel_layout, (uint32_t) caf_chunk_header.mChunkSize, &bcount) ||
-+            if (caf_chunk_header.mChunkSize < sizeof (CAFChannelLayout) || caf_chunk_header.mChunkSize > 1024) {
-+                error_line ("this .CAF file has an invalid 'chan' chunk!");
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-+            if (debug_logging_mode)
-+                error_line ("'chan' chunk is %d bytes", (int) caf_chunk_header.mChunkSize);
-+
-+            caf_channel_layout = malloc ((size_t) caf_chunk_header.mChunkSize);
-+
-+            if (!DoReadFile (infile, caf_channel_layout, (uint32_t) caf_chunk_header.mChunkSize, &bcount) ||
-                 bcount != caf_chunk_header.mChunkSize) {
-                     error_line ("%s is not a valid .CAF file!", infilename);
-                     free (caf_channel_layout);
-@@ -495,8 +504,15 @@ int ParseCaffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpack
-         }
-         else {          // just copy unknown chunks to output file
- 
--            int bytes_to_copy = (uint32_t) caf_chunk_header.mChunkSize;
--            char *buff = malloc (bytes_to_copy);
-+            uint32_t bytes_to_copy = (uint32_t) caf_chunk_header.mChunkSize;
-+            char *buff;
-+
-+            if (caf_chunk_header.mChunkSize < 0 || caf_chunk_header.mChunkSize > 1048576) {
-+                error_line ("%s is not a valid .CAF file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-+            buff = malloc (bytes_to_copy);
- 
-             if (debug_logging_mode)
-                 error_line ("extra unknown chunk \"%c%c%c%c\" of %d bytes",
--- 
-2.11.0
-
diff --git a/buildroot/package/wavpack/0005-issue-30-issue-31-issue-32-no-multiple-format-chunks.patch b/buildroot/package/wavpack/0005-issue-30-issue-31-issue-32-no-multiple-format-chunks.patch
deleted file mode 100644
index f837a0e96..000000000
--- a/buildroot/package/wavpack/0005-issue-30-issue-31-issue-32-no-multiple-format-chunks.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 26cb47f99d481ad9b93eeff80d26e6b63bbd7e15 Mon Sep 17 00:00:00 2001
-From: David Bryant 
-Date: Tue, 24 Apr 2018 22:18:07 -0700
-Subject: [PATCH] issue #30 issue #31 issue #32: no multiple format chunks in
- WAV or W64
-
-Signed-off-by: Peter Korsgaard 
----
- cli/riff.c   | 7 ++++++-
- cli/wave64.c | 6 ++++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
-diff --git a/cli/riff.c b/cli/riff.c
-index 7bddf63..5d6452e 100644
---- a/cli/riff.c
-+++ b/cli/riff.c
-@@ -53,7 +53,7 @@ extern int debug_logging_mode;
- 
- int ParseRiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, WavpackContext *wpc, WavpackConfig *config)
- {
--    int is_rf64 = !strncmp (fourcc, "RF64", 4), got_ds64 = 0;
-+    int is_rf64 = !strncmp (fourcc, "RF64", 4), got_ds64 = 0, format_chunk = 0;
-     int64_t total_samples = 0, infilesize;
-     RiffChunkHeader riff_chunk_header;
-     ChunkHeader chunk_header;
-@@ -140,6 +140,11 @@ int ParseRiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpack
-         else if (!strncmp (chunk_header.ckID, "fmt ", 4)) {     // if it's the format chunk, we want to get some info out of there and
-             int supported = TRUE, format;                        // make sure it's a .wav file we can handle
- 
-+            if (format_chunk++) {
-+                error_line ("%s is not a valid .WAV file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-             if (chunk_header.ckSize < 16 || chunk_header.ckSize > sizeof (WaveHeader) ||
-                 !DoReadFile (infile, &WaveHeader, chunk_header.ckSize, &bcount) ||
-                 bcount != chunk_header.ckSize) {
-diff --git a/cli/wave64.c b/cli/wave64.c
-index fa928a0..0388dc7 100644
---- a/cli/wave64.c
-+++ b/cli/wave64.c
-@@ -53,6 +53,7 @@ int ParseWave64HeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpa
-     Wave64ChunkHeader chunk_header;
-     Wave64FileHeader filehdr;
-     WaveHeader WaveHeader;
-+    int format_chunk = 0;
-     uint32_t bcount;
- 
-     infilesize = DoGetFileSize (infile);
-@@ -104,6 +105,11 @@ int ParseWave64HeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpa
-         if (!memcmp (chunk_header.ckID, fmt_guid, sizeof (fmt_guid))) {
-             int supported = TRUE, format;
- 
-+            if (format_chunk++) {
-+                error_line ("%s is not a valid .W64 file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-             chunk_header.ckSize = (chunk_header.ckSize + 7) & ~7L;
- 
-             if (chunk_header.ckSize < 16 || chunk_header.ckSize > sizeof (WaveHeader) ||
--- 
-2.11.0
-
diff --git a/buildroot/package/wavpack/0006-issue-33-sanitize-size-of-unknown-chunks-before-mall.patch b/buildroot/package/wavpack/0006-issue-33-sanitize-size-of-unknown-chunks-before-mall.patch
deleted file mode 100644
index 76ebce66d..000000000
--- a/buildroot/package/wavpack/0006-issue-33-sanitize-size-of-unknown-chunks-before-mall.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 6f8bb34c2993a48ab9afbe353e6d0cff7c8d821d Mon Sep 17 00:00:00 2001
-From: David Bryant 
-Date: Tue, 24 Apr 2018 17:27:01 -0700
-Subject: [PATCH] issue #33, sanitize size of unknown chunks before malloc()
-
-Signed-off-by: Peter Korsgaard 
----
- cli/dsdiff.c | 9 ++++++++-
- cli/riff.c   | 9 ++++++++-
- cli/wave64.c | 9 ++++++++-
- 3 files changed, 24 insertions(+), 3 deletions(-)
-
-diff --git a/cli/dsdiff.c b/cli/dsdiff.c
-index c016df9..fa56bbb 100644
---- a/cli/dsdiff.c
-+++ b/cli/dsdiff.c
-@@ -279,7 +279,14 @@ int ParseDsdiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpa
-         else {          // just copy unknown chunks to output file
- 
-             int bytes_to_copy = (int)(((dff_chunk_header.ckDataSize) + 1) & ~(int64_t)1);
--            char *buff = malloc (bytes_to_copy);
-+            char *buff;
-+
-+            if (bytes_to_copy < 0 || bytes_to_copy > 4194304) {
-+                error_line ("%s is not a valid .DFF file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-+            buff = malloc (bytes_to_copy);
- 
-             if (debug_logging_mode)
-                 error_line ("extra unknown chunk \"%c%c%c%c\" of %d bytes",
-diff --git a/cli/riff.c b/cli/riff.c
-index de98c1e..7bddf63 100644
---- a/cli/riff.c
-+++ b/cli/riff.c
-@@ -286,7 +286,14 @@ int ParseRiffHeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpack
-         else {          // just copy unknown chunks to output file
- 
-             int bytes_to_copy = (chunk_header.ckSize + 1) & ~1L;
--            char *buff = malloc (bytes_to_copy);
-+            char *buff;
-+
-+            if (bytes_to_copy < 0 || bytes_to_copy > 4194304) {
-+                error_line ("%s is not a valid .WAV file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-+            buff = malloc (bytes_to_copy);
- 
-             if (debug_logging_mode)
-                 error_line ("extra unknown chunk \"%c%c%c%c\" of %d bytes",
-diff --git a/cli/wave64.c b/cli/wave64.c
-index 591d640..fa928a0 100644
---- a/cli/wave64.c
-+++ b/cli/wave64.c
-@@ -241,7 +241,14 @@ int ParseWave64HeaderConfig (FILE *infile, char *infilename, char *fourcc, Wavpa
-         }
-         else {          // just copy unknown chunks to output file
-             int bytes_to_copy = (chunk_header.ckSize + 7) & ~7L;
--            char *buff = malloc (bytes_to_copy);
-+            char *buff;
-+
-+            if (bytes_to_copy < 0 || bytes_to_copy > 4194304) {
-+                error_line ("%s is not a valid .W64 file!", infilename);
-+                return WAVPACK_SOFT_ERROR;
-+            }
-+
-+            buff = malloc (bytes_to_copy);
- 
-             if (debug_logging_mode)
-                 error_line ("extra unknown chunk \"%c%c%c%c\" of %d bytes",
--- 
-2.11.0
-
diff --git a/buildroot/package/wavpack/wavpack.hash b/buildroot/package/wavpack/wavpack.hash
index 56ba7d839..6b1f90a1f 100644
--- a/buildroot/package/wavpack/wavpack.hash
+++ b/buildroot/package/wavpack/wavpack.hash
@@ -1,2 +1,3 @@
 # locally computed hash
-sha256  1939627d5358d1da62bc6158d63f7ed12905552f3a799c799ee90296a7612944  wavpack-5.1.0.tar.bz2
+sha256  77e5b1cfa26e387e4275b362f0c3fb9a27106447d9bce00f9f794f30badb77e3  wavpack-5.2.0.tar.xz
+sha256  2ab58075e26305cc16920e9867c1d43f46ce81adab2051100dd316a3a93a2619  COPYING
diff --git a/buildroot/package/wavpack/wavpack.mk b/buildroot/package/wavpack/wavpack.mk
index c23b12752..9246b9539 100644
--- a/buildroot/package/wavpack/wavpack.mk
+++ b/buildroot/package/wavpack/wavpack.mk
@@ -4,9 +4,10 @@
 #
 ################################################################################
 
-WAVPACK_VERSION = 5.1.0
-WAVPACK_SITE = http://www.wavpack.com
-WAVPACK_SOURCE = wavpack-$(WAVPACK_VERSION).tar.bz2
+WAVPACK_VERSION = 5.2.0
+WAVPACK_SITE = \
+	https://github.com/dbry/WavPack/releases/download/$(WAVPACK_VERSION)
+WAVPACK_SOURCE = wavpack-$(WAVPACK_VERSION).tar.xz
 WAVPACK_INSTALL_STAGING = YES
 WAVPACK_DEPENDENCIES = $(if $(BR2_ENABLE_LOCALE),,libiconv)
 WAVPACK_LICENSE = BSD-3-Clause
diff --git a/buildroot/package/webkitgtk/0001-Build-failure-after-r243644-in-GTK-Li.patch b/buildroot/package/webkitgtk/0001-Build-failure-after-r243644-in-GTK-Li.patch
deleted file mode 100644
index 748fc8e46..000000000
--- a/buildroot/package/webkitgtk/0001-Build-failure-after-r243644-in-GTK-Li.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From a672bbd75f257dd65844ad53dd21fb37345999b5 Mon Sep 17 00:00:00 2001
-From: "aperez@igalia.com"
- 
-Date: Mon, 20 May 2019 21:20:02 +0000
-Subject: [PATCH] Build failure after r243644 in GTK
- Linux 64-bit stable builds https://bugs.webkit.org/show_bug.cgi?id=196440
-
-Patch by Pablo Saavedra  on 2019-04-01
-Reviewed by Philippe Normand.
-
-* platform/graphics/gstreamer/MediaPlayerPrivateGStreamerBase.cpp:
-(WebCore::MediaPlayerPrivateGStreamerBase::updateTextureMapperFlags):
-
-Signed-off-by: Adrian Perez de Castro 
-
-diff --git a/Source/WebCore/platform/graphics/gstreamer/MediaPlayerPrivateGStreamerBase.cpp b/Source/WebCore/platform/graphics/gstreamer/MediaPlayerPrivateGStreamerBase.cpp
-index 608aee2e1b3..c614050972a 100644
---- a/Source/WebCore/platform/graphics/gstreamer/MediaPlayerPrivateGStreamerBase.cpp
-+++ b/Source/WebCore/platform/graphics/gstreamer/MediaPlayerPrivateGStreamerBase.cpp
-@@ -1000,11 +1000,13 @@ void MediaPlayerPrivateGStreamerBase::updateTextureMapperFlags()
-         break;
-     }
- 
-+#if USE(GSTREAMER_GL)
-     // When the imxvpudecoder is used, the texture sampling of the
-     // directviv-uploaded texture returns an RGB value, so there's no need to
-     // convert it.
-     if (m_videoDecoderPlatform != WebKitGstVideoDecoderPlatform::ImxVPU)
-         m_textureMapperFlags |= TEXTURE_MAPPER_COLOR_CONVERT_FLAG;
-+#endif
- }
- #endif
- 
--- 
-2.21.0
-
diff --git a/buildroot/package/webkitgtk/webkitgtk.hash b/buildroot/package/webkitgtk/webkitgtk.hash
index 40bb6f7b6..71642ad14 100644
--- a/buildroot/package/webkitgtk/webkitgtk.hash
+++ b/buildroot/package/webkitgtk/webkitgtk.hash
@@ -1,7 +1,7 @@
-# From https://webkitgtk.org/releases/webkitgtk-2.24.2.tar.xz.sums
-md5 83012998e1b9f71abb37d8baf6f9c7e6 webkitgtk-2.24.2.tar.xz
-sha1 632a65d93beb996bebdf7592ef9591f3993dea91 webkitgtk-2.24.2.tar.xz
-sha256 019cb1f0d05bf6148b72c7a85734bcd006388a1c14132843ef9a1b2cb7b4321c webkitgtk-2.24.2.tar.xz
+# From https://webkitgtk.org/releases/webkitgtk-2.26.2.tar.xz.sums
+md5 65e06fe73ee166447894aaea95038e3b webkitgtk-2.26.2.tar.xz
+sha1 5bd1ccb436c76fd1edb83afd5bec377de5655d45 webkitgtk-2.26.2.tar.xz
+sha256 6b80f0637a80818559ac8fd50db3b394f41cb61904fb9b3ed65fa51635806512 webkitgtk-2.26.2.tar.xz
 
 # Hashes for license files:
 sha256 0b5d3a7cc325942567373b0ecd757d07c132e0ebd7c97bfc63f7e1a76094edb4 Source/WebCore/LICENSE-APPLE
diff --git a/buildroot/package/webkitgtk/webkitgtk.mk b/buildroot/package/webkitgtk/webkitgtk.mk
index e81ba047e..1273c1afe 100644
--- a/buildroot/package/webkitgtk/webkitgtk.mk
+++ b/buildroot/package/webkitgtk/webkitgtk.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-WEBKITGTK_VERSION = 2.24.2
+WEBKITGTK_VERSION = 2.26.2
 WEBKITGTK_SITE = https://www.webkitgtk.org/releases
 WEBKITGTK_SOURCE = webkitgtk-$(WEBKITGTK_VERSION).tar.xz
 WEBKITGTK_INSTALL_STAGING = YES
@@ -17,6 +17,7 @@ WEBKITGTK_DEPENDENCIES = host-ruby host-python host-gperf \
 	libtasn1 libxml2 libxslt openjpeg sqlite webp woff2
 WEBKITGTK_CONF_OPTS = \
 	-DENABLE_API_TESTS=OFF \
+	-DENABLE_BUBBLEWRAP_SANDBOX=OFF \
 	-DENABLE_GEOLOCATION=OFF \
 	-DENABLE_GTKDOC=OFF \
 	-DENABLE_INTROSPECTION=OFF \
@@ -26,7 +27,8 @@ WEBKITGTK_CONF_OPTS = \
 	-DUSE_LIBNOTIFY=OFF \
 	-DUSE_LIBHYPHEN=OFF \
 	-DUSE_OPENJPEG=ON \
-	-DUSE_WOFF2=ON
+	-DUSE_WOFF2=ON \
+	-DUSE_WPE_RENDERER=OFF
 
 ifeq ($(BR2_PACKAGE_WEBKITGTK_MULTIMEDIA),y)
 WEBKITGTK_CONF_OPTS += \
diff --git a/buildroot/package/weston/0002-rdp-compositor-fix-compilation-with-FreeRDP-2.0-rc4.patch b/buildroot/package/weston/0002-rdp-compositor-fix-compilation-with-FreeRDP-2.0-rc4.patch
new file mode 100644
index 000000000..fe2303d42
--- /dev/null
+++ b/buildroot/package/weston/0002-rdp-compositor-fix-compilation-with-FreeRDP-2.0-rc4.patch
@@ -0,0 +1,218 @@
+From 7b7d9d316a9ce9b4f5f50ba766c2963b0fdcbaa5 Mon Sep 17 00:00:00 2001
+From: David Fort 
+Date: Tue, 4 Dec 2018 23:25:39 +0100
+Subject: [PATCH] rdp-compositor: fix compilation with FreeRDP 2.0-rc4
+
+Some members have been removed from FreeRDP structs, so let's use local
+variables.
+
+[yann.morin.1998@free.fr: backport from upstream]
+Signed-off-by: Yann E. MORIN 
+
+---
+ libweston/compositor-rdp.c | 86 +++++++++++++++++++-------------------
+ 1 file changed, 43 insertions(+), 43 deletions(-)
+
+diff --git a/libweston/compositor-rdp.c b/libweston/compositor-rdp.c
+index 134e7298..871a0a3e 100644
+--- a/libweston/compositor-rdp.c
++++ b/libweston/compositor-rdp.c
+@@ -67,19 +67,19 @@
+ #endif
+ 
+ #ifdef HAVE_SURFACE_BITS_BMP
+-#define SURFACE_BPP(cmd) cmd->bmp.bpp
+-#define SURFACE_CODECID(cmd) cmd->bmp.codecID
+-#define SURFACE_WIDTH(cmd) cmd->bmp.width
+-#define SURFACE_HEIGHT(cmd) cmd->bmp.height
+-#define SURFACE_BITMAP_DATA(cmd) cmd->bmp.bitmapData
+-#define SURFACE_BITMAP_DATA_LEN(cmd) cmd->bmp.bitmapDataLength
++#define SURFACE_BPP(cmd) cmd.bmp.bpp
++#define SURFACE_CODECID(cmd) cmd.bmp.codecID
++#define SURFACE_WIDTH(cmd) cmd.bmp.width
++#define SURFACE_HEIGHT(cmd) cmd.bmp.height
++#define SURFACE_BITMAP_DATA(cmd) cmd.bmp.bitmapData
++#define SURFACE_BITMAP_DATA_LEN(cmd) cmd.bmp.bitmapDataLength
+ #else
+-#define SURFACE_BPP(cmd) cmd->bpp
+-#define SURFACE_CODECID(cmd) cmd->codecID
+-#define SURFACE_WIDTH(cmd) cmd->width
+-#define SURFACE_HEIGHT(cmd) cmd->height
+-#define SURFACE_BITMAP_DATA(cmd) cmd->bitmapData
+-#define SURFACE_BITMAP_DATA_LEN(cmd) cmd->bitmapDataLength
++#define SURFACE_BPP(cmd) cmd.bpp
++#define SURFACE_CODECID(cmd) cmd.codecID
++#define SURFACE_WIDTH(cmd) cmd.width
++#define SURFACE_HEIGHT(cmd) cmd.height
++#define SURFACE_BITMAP_DATA(cmd) cmd.bitmapData
++#define SURFACE_BITMAP_DATA_LEN(cmd) cmd.bitmapDataLength
+ #endif
+ 
+ #include 
+@@ -198,7 +198,7 @@ rdp_peer_refresh_rfx(pixman_region32_t *damage, pixman_image_t *image, freerdp_p
+ 	uint32_t *ptr;
+ 	RFX_RECT *rfxRect;
+ 	rdpUpdate *update = peer->update;
+-	SURFACE_BITS_COMMAND *cmd = &update->surface_bits_command;
++	SURFACE_BITS_COMMAND cmd;
+ 	RdpPeerContext *context = (RdpPeerContext *)peer->context;
+ 
+ 	Stream_Clear(context->encode_stream);
+@@ -208,14 +208,14 @@ rdp_peer_refresh_rfx(pixman_region32_t *damage, pixman_image_t *image, freerdp_p
+ 	height = (damage->extents.y2 - damage->extents.y1);
+ 
+ #ifdef HAVE_SKIP_COMPRESSION
+-	cmd->skipCompression = TRUE;
++	cmd.skipCompression = TRUE;
+ #else
+-	memset(cmd, 0, sizeof(*cmd));
++	memset(&cmd, 0, sizeof(*cmd));
+ #endif
+-	cmd->destLeft = damage->extents.x1;
+-	cmd->destTop = damage->extents.y1;
+-	cmd->destRight = damage->extents.x2;
+-	cmd->destBottom = damage->extents.y2;
++	cmd.destLeft = damage->extents.x1;
++	cmd.destTop = damage->extents.y1;
++	cmd.destRight = damage->extents.x2;
++	cmd.destBottom = damage->extents.y2;
+ 	SURFACE_BPP(cmd) = 32;
+ 	SURFACE_CODECID(cmd) = peer->settings->RemoteFxCodecId;
+ 	SURFACE_WIDTH(cmd) = width;
+@@ -245,7 +245,7 @@ rdp_peer_refresh_rfx(pixman_region32_t *damage, pixman_image_t *image, freerdp_p
+ 	SURFACE_BITMAP_DATA_LEN(cmd) = Stream_GetPosition(context->encode_stream);
+ 	SURFACE_BITMAP_DATA(cmd) = Stream_Buffer(context->encode_stream);
+ 
+-	update->SurfaceBits(update->context, cmd);
++	update->SurfaceBits(update->context, &cmd);
+ }
+ 
+ 
+@@ -255,7 +255,7 @@ rdp_peer_refresh_nsc(pixman_region32_t *damage, pixman_image_t *image, freerdp_p
+ 	int width, height;
+ 	uint32_t *ptr;
+ 	rdpUpdate *update = peer->update;
+-	SURFACE_BITS_COMMAND *cmd = &update->surface_bits_command;
++	SURFACE_BITS_COMMAND cmd;
+ 	RdpPeerContext *context = (RdpPeerContext *)peer->context;
+ 
+ 	Stream_Clear(context->encode_stream);
+@@ -265,15 +265,15 @@ rdp_peer_refresh_nsc(pixman_region32_t *damage, pixman_image_t *image, freerdp_p
+ 	height = (damage->extents.y2 - damage->extents.y1);
+ 
+ #ifdef HAVE_SKIP_COMPRESSION
+-	cmd->skipCompression = TRUE;
++	cmd.skipCompression = TRUE;
+ #else
+ 	memset(cmd, 0, sizeof(*cmd));
+ #endif
+ 
+-	cmd->destLeft = damage->extents.x1;
+-	cmd->destTop = damage->extents.y1;
+-	cmd->destRight = damage->extents.x2;
+-	cmd->destBottom = damage->extents.y2;
++	cmd.destLeft = damage->extents.x1;
++	cmd.destTop = damage->extents.y1;
++	cmd.destRight = damage->extents.x2;
++	cmd.destBottom = damage->extents.y2;
+ 	SURFACE_BPP(cmd) = 32;
+ 	SURFACE_CODECID(cmd) = peer->settings->NSCodecId;
+ 	SURFACE_WIDTH(cmd) = width;
+@@ -289,7 +289,7 @@ rdp_peer_refresh_nsc(pixman_region32_t *damage, pixman_image_t *image, freerdp_p
+ 	SURFACE_BITMAP_DATA_LEN(cmd) = Stream_GetPosition(context->encode_stream);
+ 	SURFACE_BITMAP_DATA(cmd) = Stream_Buffer(context->encode_stream);
+ 
+-	update->SurfaceBits(update->context, cmd);
++	update->SurfaceBits(update->context, &cmd);
+ }
+ 
+ static void
+@@ -310,8 +310,8 @@ static void
+ rdp_peer_refresh_raw(pixman_region32_t *region, pixman_image_t *image, freerdp_peer *peer)
+ {
+ 	rdpUpdate *update = peer->update;
+-	SURFACE_BITS_COMMAND *cmd = &update->surface_bits_command;
+-	SURFACE_FRAME_MARKER *marker = &update->surface_frame_marker;
++	SURFACE_BITS_COMMAND cmd;
++	SURFACE_FRAME_MARKER marker;
+ 	pixman_box32_t *rect, subrect;
+ 	int nrects, i;
+ 	int heightIncrement, remainingHeight, top;
+@@ -320,18 +320,18 @@ rdp_peer_refresh_raw(pixman_region32_t *region, pixman_image_t *image, freerdp_p
+ 	if (!nrects)
+ 		return;
+ 
+-	marker->frameId++;
+-	marker->frameAction = SURFACECMD_FRAMEACTION_BEGIN;
+-	update->SurfaceFrameMarker(peer->context, marker);
++	marker.frameId++;
++	marker.frameAction = SURFACECMD_FRAMEACTION_BEGIN;
++	update->SurfaceFrameMarker(peer->context, &marker);
+ 
+-	memset(cmd, 0, sizeof(*cmd));
++	memset(&cmd, 0, sizeof(cmd));
+ 	SURFACE_BPP(cmd) = 32;
+ 	SURFACE_CODECID(cmd) = 0;
+ 
+ 	for (i = 0; i < nrects; i++, rect++) {
+ 		/*weston_log("rect(%d,%d, %d,%d)\n", rect->x1, rect->y1, rect->x2, rect->y2);*/
+-		cmd->destLeft = rect->x1;
+-		cmd->destRight = rect->x2;
++		cmd.destLeft = rect->x1;
++		cmd.destRight = rect->x2;
+ 		SURFACE_WIDTH(cmd) = rect->x2 - rect->x1;
+ 
+ 		heightIncrement = peer->settings->MultifragMaxRequestSize / (16 + SURFACE_WIDTH(cmd) * 4);
+@@ -343,8 +343,8 @@ rdp_peer_refresh_raw(pixman_region32_t *region, pixman_image_t *image, freerdp_p
+ 
+ 		while (remainingHeight) {
+ 			   SURFACE_HEIGHT(cmd) = (remainingHeight > heightIncrement) ? heightIncrement : remainingHeight;
+-			   cmd->destTop = top;
+-			   cmd->destBottom = top + SURFACE_HEIGHT(cmd);
++			   cmd.destTop = top;
++			   cmd.destBottom = top + SURFACE_HEIGHT(cmd);
+ 			   SURFACE_BITMAP_DATA_LEN(cmd) = SURFACE_WIDTH(cmd) * SURFACE_HEIGHT(cmd) * 4;
+ 			   SURFACE_BITMAP_DATA(cmd) = (BYTE *)realloc(SURFACE_BITMAP_DATA(cmd), SURFACE_BITMAP_DATA_LEN(cmd));
+ 
+@@ -353,15 +353,15 @@ rdp_peer_refresh_raw(pixman_region32_t *region, pixman_image_t *image, freerdp_p
+ 			   pixman_image_flipped_subrect(&subrect, image, SURFACE_BITMAP_DATA(cmd));
+ 
+ 			   /*weston_log("*  sending (%d,%d, %d,%d)\n", subrect.x1, subrect.y1, subrect.x2, subrect.y2); */
+-			   update->SurfaceBits(peer->context, cmd);
++			   update->SurfaceBits(peer->context, &cmd);
+ 
+ 			   remainingHeight -= SURFACE_HEIGHT(cmd);
+ 			   top += SURFACE_HEIGHT(cmd);
+ 		}
+ 	}
+ 
+-	marker->frameAction = SURFACECMD_FRAMEACTION_END;
+-	update->SurfaceFrameMarker(peer->context, marker);
++	marker.frameAction = SURFACECMD_FRAMEACTION_END;
++	update->SurfaceFrameMarker(peer->context, &marker);
+ }
+ 
+ static void
+@@ -956,7 +956,7 @@ xf_peer_activate(freerdp_peer* client)
+ 	pixman_box32_t box;
+ 	pixman_region32_t damage;
+ 	char seat_name[50];
+-
++	POINTER_SYSTEM_UPDATE pointer_system;
+ 
+ 	peerCtx = (RdpPeerContext *)client->context;
+ 	b = peerCtx->rdpBackend;
+@@ -1056,8 +1056,8 @@ xf_peer_activate(freerdp_peer* client)
+ 
+ 	/* disable pointer on the client side */
+ 	pointer = client->update->pointer;
+-	pointer->pointer_system.type = SYSPTR_NULL;
+-	pointer->PointerSystem(client->context, &pointer->pointer_system);
++	pointer_system.type = SYSPTR_NULL;
++	pointer->PointerSystem(client->context, &pointer_system);
+ 
+ 	/* sends a full refresh */
+ 	box.x1 = 0;
+-- 
+2.20.1
+
diff --git a/buildroot/package/wireguard/wireguard.hash b/buildroot/package/wireguard/wireguard.hash
index 70558de72..8097aeb95 100644
--- a/buildroot/package/wireguard/wireguard.hash
+++ b/buildroot/package/wireguard/wireguard.hash
@@ -1,4 +1,4 @@
 # https://lists.zx2c4.com/pipermail/wireguard/2019-January/003805.html
-sha256 edd13c7631af169e3838621b1a1bff3ef73cf7bc778eec2bd55f7c1089ffdf9b  WireGuard-0.0.20190123.tar.xz
+sha256 5aba6f0c38e97faa0b155623ba594bb0e4bd5e29deacd8d5ed8bda8d8283b0e7  WireGuard-0.0.20191219.tar.xz
 # Locally calculated
 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643  COPYING
diff --git a/buildroot/package/wireguard/wireguard.mk b/buildroot/package/wireguard/wireguard.mk
index 8d6cdb8e5..500c7dbd2 100644
--- a/buildroot/package/wireguard/wireguard.mk
+++ b/buildroot/package/wireguard/wireguard.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-WIREGUARD_VERSION = 0.0.20190123
+WIREGUARD_VERSION = 0.0.20191219
 WIREGUARD_SITE = https://git.zx2c4.com/WireGuard/snapshot
 WIREGUARD_SOURCE = WireGuard-$(WIREGUARD_VERSION).tar.xz
 WIREGUARD_LICENSE = GPL-2.0
diff --git a/buildroot/package/wireless-regdb/wireless-regdb.hash b/buildroot/package/wireless-regdb/wireless-regdb.hash
index aa035d0ef..d6cb72ee7 100644
--- a/buildroot/package/wireless-regdb/wireless-regdb.hash
+++ b/buildroot/package/wireless-regdb/wireless-regdb.hash
@@ -1,4 +1,4 @@
 # From https://www.kernel.org/pub/software/network/wireless-regdb/sha256sums.asc
-sha256 a36b8147f1a3e98e1fd44321a4b8d7ad2f03cac98cdf527ccb1693342f08d65a  wireless-regdb-2018.09.07.tar.xz
+sha256 cd917ed86b63ce8d93947979f1f18948f03a4ac0ad89ec25227b36ac00dc54bf  wireless-regdb-2019.06.03.tar.xz
 # Locally computed
 sha256 678b0df753c86198fc496d1f1033429bbd57f101472132ee7eaaf9f5e0a7fae1  LICENSE
diff --git a/buildroot/package/wireless-regdb/wireless-regdb.mk b/buildroot/package/wireless-regdb/wireless-regdb.mk
index c509c7c7f..31b62e36e 100644
--- a/buildroot/package/wireless-regdb/wireless-regdb.mk
+++ b/buildroot/package/wireless-regdb/wireless-regdb.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-WIRELESS_REGDB_VERSION = 2018.09.07
+WIRELESS_REGDB_VERSION = 2019.06.03
 WIRELESS_REGDB_SOURCE = wireless-regdb-$(WIRELESS_REGDB_VERSION).tar.xz
 WIRELESS_REGDB_SITE = $(BR2_KERNEL_MIRROR)/software/network/wireless-regdb
 WIRELESS_REGDB_LICENSE = ISC
diff --git a/buildroot/package/wireshark/wireshark.hash b/buildroot/package/wireshark/wireshark.hash
index 071940e1c..6474e166d 100644
--- a/buildroot/package/wireshark/wireshark.hash
+++ b/buildroot/package/wireshark/wireshark.hash
@@ -1,4 +1,4 @@
-# From: https://www.wireshark.org/download/src/all-versions/SIGNATURES-2.6.7.txt
-sha256 747b3e7a37414942959f76f198be49dcbcca936bda538c4408942ce71bfd2b71  wireshark-2.6.7.tar.xz
+# From: https://www.wireshark.org/download/src/all-versions/SIGNATURES-2.6.11.txt
+sha256 29751581c8549562957940e68f0b9410a499616c91c1768195bc02def13f5a85  wireshark-2.6.11.tar.xz
 # Locally calculated
 sha256 7cdbed2b697efaa45576a033f1ac0e73cd045644a91c79bbf41d4a7d81dac7bf  COPYING
diff --git a/buildroot/package/wireshark/wireshark.mk b/buildroot/package/wireshark/wireshark.mk
index a917efb5f..bf924cadd 100644
--- a/buildroot/package/wireshark/wireshark.mk
+++ b/buildroot/package/wireshark/wireshark.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-WIRESHARK_VERSION = 2.6.7
+WIRESHARK_VERSION = 2.6.11
 WIRESHARK_SOURCE = wireshark-$(WIRESHARK_VERSION).tar.xz
 WIRESHARK_SITE = https://www.wireshark.org/download/src/all-versions
 WIRESHARK_LICENSE = wireshark license
diff --git a/buildroot/package/wsapi-fcgi/Config.in b/buildroot/package/wsapi-fcgi/Config.in
index 73ef8cb00..657ae78c6 100644
--- a/buildroot/package/wsapi-fcgi/Config.in
+++ b/buildroot/package/wsapi-fcgi/Config.in
@@ -8,4 +8,4 @@ config BR2_PACKAGE_WSAPI_FCGI
 	  applications. This is the rock that contains the FCGI module
 	  lfcgi.
 
-	  http://www.keplerproject.org/wsapi
+	  https://luarocks.org/modules/mascarenhas/wsapi-fcgi
diff --git a/buildroot/package/wsapi-xavante/Config.in b/buildroot/package/wsapi-xavante/Config.in
index 7079ad4ed..7af23b84e 100644
--- a/buildroot/package/wsapi-xavante/Config.in
+++ b/buildroot/package/wsapi-xavante/Config.in
@@ -7,4 +7,4 @@ config BR2_PACKAGE_WSAPI_XAVANTE
 	  applications. This is the rock that contains the Xavante
 	  adapter and launcher.
 
-	  http://www.keplerproject.org/wsapi
+	  https://keplerproject.github.io/wsapi/
diff --git a/buildroot/package/wsapi/Config.in b/buildroot/package/wsapi/Config.in
index 72e2dcd8e..e758e8e0a 100644
--- a/buildroot/package/wsapi/Config.in
+++ b/buildroot/package/wsapi/Config.in
@@ -6,4 +6,4 @@ config BR2_PACKAGE_WSAPI
 	help
 	  API that abstracts the web server from Lua web applications.
 
-	  http://www.keplerproject.org/wsapi
+	  https://keplerproject.github.io/wsapi/
diff --git a/buildroot/package/x11r7/libxcb/libxcb.hash b/buildroot/package/x11r7/libxcb/libxcb.hash
index d2b5da6b5..9158b6bb2 100644
--- a/buildroot/package/x11r7/libxcb/libxcb.hash
+++ b/buildroot/package/x11r7/libxcb/libxcb.hash
@@ -1,7 +1,6 @@
-# From https://lists.x.org/archives/xorg-announce/2018-March/002851.html
-md5 c2b6cf928afa16b0047c974e7aaa783f  libxcb-1.13.tar.bz2
-sha1 212ad5f1f80def80536d78e3d20354a0370e7fe9  libxcb-1.13.tar.bz2
-sha256 188c8752193c50ff2dbe89db4554c63df2e26a2e47b0fa415a70918b5b851daa  libxcb-1.13.tar.bz2
-sha512 d99bbe386a65f60fcc0cc2935e4a365bc0577b5e90433e18778a665a5aee8ebc8e9e8cb0aedac0ac4a276147c0507e759a716874ea4f80792b2fc18eefbc128c  libxcb-1.13.tar.bz2
+# From https://lists.x.org/archives/xorg/2018-September/059469.html
+md5 f33cdfc67346f7217a9326c0d8679975  libxcb-1.13.1.tar.bz2
+sha1 2ab17a1bb2a44e0a9cb0b26bcf899689ba1bbb3b  libxcb-1.13.1.tar.bz2
+sha256 a89fb7af7a11f43d2ce84a844a4b38df688c092bf4b67683aef179cdf2a647c4  libxcb-1.13.1.tar.bz2
 # Locally computed
 sha256 c5ffbfeaa501071ceeb97b7de2c0d703fdaa35de01c0fb6cbac1c28453a3e9fd  COPYING
diff --git a/buildroot/package/x11r7/libxcb/libxcb.mk b/buildroot/package/x11r7/libxcb/libxcb.mk
index 7e467aca3..fdc65cefc 100644
--- a/buildroot/package/x11r7/libxcb/libxcb.mk
+++ b/buildroot/package/x11r7/libxcb/libxcb.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-LIBXCB_VERSION = 1.13
+LIBXCB_VERSION = 1.13.1
 LIBXCB_SOURCE = libxcb-$(LIBXCB_VERSION).tar.bz2
 LIBXCB_SITE = http://xcb.freedesktop.org/dist
 LIBXCB_LICENSE = MIT
diff --git a/buildroot/package/x11r7/xfont_font-util/xfont_font-util.hash b/buildroot/package/x11r7/xfont_font-util/xfont_font-util.hash
index 04ada91da..55beba89f 100644
--- a/buildroot/package/x11r7/xfont_font-util/xfont_font-util.hash
+++ b/buildroot/package/x11r7/xfont_font-util/xfont_font-util.hash
@@ -1,3 +1,8 @@
-# From http://lists.x.org/archives/xorg-announce/2015-March/002546.html
-sha1	0b16add3637c64b0bbaf1dd223b71b0421100c20				font-util-1.3.1.tar.bz2
-sha256	aa7ebdb0715106dd255082f2310dbaa2cd7e225957c2a77d719720c7cc92b921	font-util-1.3.1.tar.bz2
+# From https://lists.x.org/archives/xorg-announce/2019-August/003019.html
+md5 3d6adb76fdd072db8c8fae41b40855e8  font-util-1.3.2.tar.bz2
+sha1 1b36275c174b64a9c16da5c902c91546789a67ef  font-util-1.3.2.tar.bz2
+sha256 3ad880444123ac06a7238546fa38a2a6ad7f7e0cc3614de7e103863616522282  font-util-1.3.2.tar.bz2
+sha512 7cac529b12ae71185b89c72c1569b9826f52eeaecc1c76010338e7c42c4078ae339f18220b580bbd68fb5dc09df6ecf169a47c32e6104d8ee53bd443fa21d167  font-util-1.3.2.tar.bz2
+
+# Locally calculated
+sha256	ce16c3ee6f2a38db6870b66bdb54fce9dcf24acd1161840789e321f6faa1251c	COPYING
diff --git a/buildroot/package/x11r7/xfont_font-util/xfont_font-util.mk b/buildroot/package/x11r7/xfont_font-util/xfont_font-util.mk
index 89b138b64..cd2ae81cc 100644
--- a/buildroot/package/x11r7/xfont_font-util/xfont_font-util.mk
+++ b/buildroot/package/x11r7/xfont_font-util/xfont_font-util.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-XFONT_FONT_UTIL_VERSION = 1.3.1
+XFONT_FONT_UTIL_VERSION = 1.3.2
 XFONT_FONT_UTIL_SOURCE = font-util-$(XFONT_FONT_UTIL_VERSION).tar.bz2
 XFONT_FONT_UTIL_SITE = http://xorg.freedesktop.org/releases/individual/font
 XFONT_FONT_UTIL_LICENSE = MIT/BSD-2-Clause
diff --git a/buildroot/package/x11r7/xlib_libICE/xlib_libICE.hash b/buildroot/package/x11r7/xlib_libICE/xlib_libICE.hash
index 1b006ce36..426ada32a 100644
--- a/buildroot/package/x11r7/xlib_libICE/xlib_libICE.hash
+++ b/buildroot/package/x11r7/xlib_libICE/xlib_libICE.hash
@@ -1,2 +1,7 @@
-# From http://lists.freedesktop.org/pipermail/xorg/2014-June/056671.html
-sha256	8f7032f2c1c64352b5423f6b48a8ebdc339cc63064af34d66a6c9aa79759e202	libICE-1.0.9.tar.bz2
+# From https://lists.x.org/archives/xorg-announce/2019-July/003006.html
+md5 76d77499ee7120a56566891ca2c0dbcf  libICE-1.0.10.tar.bz2
+sha1 5b5eb125d4f43a3ab8153b0f850963ee6c982c24  libICE-1.0.10.tar.bz2
+sha256 6f86dce12cf4bcaf5c37dddd8b1b64ed2ddf1ef7b218f22b9942595fb747c348  libICE-1.0.10.tar.bz2
+sha512 2f1ef2c32c833c71894a08fa7e7ed53f301f6c7bd22485d71c12884d8e8b36b99f362ec886349dcc84d08edc81c8b2cea035320831d64974edeba021b433c468  libICE-1.0.10.tar.bz2
+# Locally computed
+sha256 60105b7ea93cb07a67fee8443b092b727e3db7f0dff4fbe05bc6cd7747fb53c8  COPYING
diff --git a/buildroot/package/x11r7/xlib_libICE/xlib_libICE.mk b/buildroot/package/x11r7/xlib_libICE/xlib_libICE.mk
index 982e8fdef..0b1f8ade1 100644
--- a/buildroot/package/x11r7/xlib_libICE/xlib_libICE.mk
+++ b/buildroot/package/x11r7/xlib_libICE/xlib_libICE.mk
@@ -4,9 +4,9 @@
 #
 ################################################################################
 
-XLIB_LIBICE_VERSION = 1.0.9
+XLIB_LIBICE_VERSION = 1.0.10
 XLIB_LIBICE_SOURCE = libICE-$(XLIB_LIBICE_VERSION).tar.bz2
-XLIB_LIBICE_SITE = http://xorg.freedesktop.org/releases/individual/lib
+XLIB_LIBICE_SITE = https://xorg.freedesktop.org/archive/individual/lib
 XLIB_LIBICE_LICENSE = MIT
 XLIB_LIBICE_LICENSE_FILES = COPYING
 XLIB_LIBICE_INSTALL_STAGING = YES
diff --git a/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.hash b/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.hash
index ea0434871..455d99ff3 100644
--- a/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.hash
+++ b/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.hash
@@ -3,3 +3,6 @@ md5  16eaf156edd79b68038b6a7c44aa9e9b  libXfont-1.5.4.tar.bz2
 sha1 9db050f63b9c4cb19e0dbb40575558ccb95719ca  libXfont-1.5.4.tar.bz2
 sha256 1a7f7490774c87f2052d146d1e0e64518d32e6848184a18654e8d0bb57883242  libXfont-1.5.4.tar.bz2
 sha512 864edbaff45c44bd92bc4b06275c73fdf584a9b88bc523a297d4c75c01ca253f438463e929af70d753ddecfa648bb0b9bcf0ec72267db9f2b1704f7afa906cb3  libXfont-1.5.4.tar.bz2
+
+# Locally calculated
+sha256 97e413bb4962bbb5773085cd5405502bf1d4eadeaf98ff5be015eacacc840462  COPYING
diff --git a/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.mk b/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.mk
index a1acfba83..eeddfeebc 100644
--- a/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.mk
+++ b/buildroot/package/x11r7/xlib_libXfont/xlib_libXfont.mk
@@ -30,5 +30,13 @@ ifeq ($(BR2_microblaze),y)
 XLIB_LIBXFONT_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -D__ELF__"
 endif
 
+XLIB_LIBXFONT_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+XLIB_LIBXFONT_CFLAGS += -O0
+endif
+
+XLIB_LIBXFONT_CONF_ENV += CFLAGS="$(XLIB_LIBXFONT_CFLAGS)"
+
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
diff --git a/buildroot/package/x11r7/xlib_libXfont2/xlib_libXfont2.mk b/buildroot/package/x11r7/xlib_libXfont2/xlib_libXfont2.mk
index ba2c7540c..65adf665b 100644
--- a/buildroot/package/x11r7/xlib_libXfont2/xlib_libXfont2.mk
+++ b/buildroot/package/x11r7/xlib_libXfont2/xlib_libXfont2.mk
@@ -27,5 +27,13 @@ HOST_XLIB_LIBXFONT2_DEPENDENCIES = \
 XLIB_LIBXFONT2_CONF_OPTS = --disable-devel-docs
 HOST_XLIB_LIBXFONT2_CONF_OPTS = --disable-devel-docs
 
+XLIB_LIBXFONT2_CFLAGS = $(TARGET_CFLAGS)
+
+ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
+XLIB_LIBXFONT2_CFLAGS += -O0
+endif
+
+XLIB_LIBXFONT2_CONF_ENV = CFLAGS="$(XLIB_LIBXFONT2_CFLAGS)"
+
 $(eval $(autotools-package))
 $(eval $(host-autotools-package))
diff --git a/buildroot/package/x11r7/xserver_xorg-server/1.20.4/0001-modesettings-needs-dri2.patch b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0001-modesettings-needs-dri2.patch
similarity index 89%
rename from buildroot/package/x11r7/xserver_xorg-server/1.20.4/0001-modesettings-needs-dri2.patch
rename to buildroot/package/x11r7/xserver_xorg-server/1.20.6/0001-modesettings-needs-dri2.patch
index 790371c45..97ec29d04 100644
--- a/buildroot/package/x11r7/xserver_xorg-server/1.20.4/0001-modesettings-needs-dri2.patch
+++ b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0001-modesettings-needs-dri2.patch
@@ -1,7 +1,7 @@
 Kernel modesettings support also depends on dri2, see
 http://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/drivers/modesetting/Makefile.am#n46
 
-Patch sent upstream: https://bugs.freedesktop.org/show_bug.cgi?id=91584
+Patch sent upstream: https://gitlab.freedesktop.org/xorg/xserver/issues/479
 
 [rebased for version 1.20.0]
 Signed-off-by: Bernd Kuhls 
diff --git a/buildroot/package/x11r7/xserver_xorg-server/1.20.4/0002-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0002-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch
similarity index 100%
rename from buildroot/package/x11r7/xserver_xorg-server/1.20.4/0002-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch
rename to buildroot/package/x11r7/xserver_xorg-server/1.20.6/0002-configure.ac-Fix-check-for-CLOCK_MONOTONIC.patch
diff --git a/buildroot/package/x11r7/xserver_xorg-server/1.20.4/0003-Remove-check-for-useSIGIO-option.patch b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0003-Remove-check-for-useSIGIO-option.patch
similarity index 100%
rename from buildroot/package/x11r7/xserver_xorg-server/1.20.4/0003-Remove-check-for-useSIGIO-option.patch
rename to buildroot/package/x11r7/xserver_xorg-server/1.20.6/0003-Remove-check-for-useSIGIO-option.patch
diff --git a/buildroot/package/x11r7/xserver_xorg-server/1.20.4/0004-include-misc.h-fix-uClibc-build.patch b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0004-include-misc.h-fix-uClibc-build.patch
similarity index 100%
rename from buildroot/package/x11r7/xserver_xorg-server/1.20.4/0004-include-misc.h-fix-uClibc-build.patch
rename to buildroot/package/x11r7/xserver_xorg-server/1.20.6/0004-include-misc.h-fix-uClibc-build.patch
diff --git a/buildroot/package/x11r7/xserver_xorg-server/1.20.4/0005-hw-xwayland-Makefile.am-fix-build-without-glx.patch b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0005-hw-xwayland-Makefile.am-fix-build-without-glx.patch
similarity index 100%
rename from buildroot/package/x11r7/xserver_xorg-server/1.20.4/0005-hw-xwayland-Makefile.am-fix-build-without-glx.patch
rename to buildroot/package/x11r7/xserver_xorg-server/1.20.6/0005-hw-xwayland-Makefile.am-fix-build-without-glx.patch
diff --git a/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0006-hw-xfree86-common-xf86Init.c-fix-build-without-glx.patch b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0006-hw-xfree86-common-xf86Init.c-fix-build-without-glx.patch
new file mode 100644
index 000000000..f1fdfe3e3
--- /dev/null
+++ b/buildroot/package/x11r7/xserver_xorg-server/1.20.6/0006-hw-xfree86-common-xf86Init.c-fix-build-without-glx.patch
@@ -0,0 +1,45 @@
+From 49456e0a37fac7bc9d1f01bc1519fb0d699956db Mon Sep 17 00:00:00 2001
+From: Fabrice Fontaine 
+Date: Fri, 27 Dec 2019 23:33:37 +0100
+Subject: [PATCH] hw/xfree86/common/xf86Init.c: fix build without glx
+
+Since commit d8ec33fe0542141aed1d9016d2ecaf52da944b4b, an include on
+glxvndabi.h has been added to hw/xfree86/common/xf86Init.c
+
+However, if glx is disabled through --disable-glx and GLX headers are
+not installed in the build's environment, build fails on:
+
+In file included from xf86Init.c:81:
+../../../include/glxvndabi.h:64:10: fatal error: GL/glxproto.h: No such file or directory
+   64 | #include 
+      |          ^~~~~~~~~~~~~~~
+
+Fix this failure by removing this include which does not seem to be
+needed (an other option would have been to keep it under an ifdef GLXEXT
+block)
+
+Fixes:
+ - http://autobuild.buildroot.org/results/de838a843f97673d1381a55fd4e9b07164693913
+
+Signed-off-by: Fabrice Fontaine 
+[Retrieved from:
+https://gitlab.freedesktop.org/xorg/xserver/commit/49456e0a37fac7bc9d1f01bc1519fb0d699956db]
+---
+ hw/xfree86/common/xf86Init.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/hw/xfree86/common/xf86Init.c b/hw/xfree86/common/xf86Init.c
+index 0631c7237..e6fb11398 100644
+--- a/hw/xfree86/common/xf86Init.c
++++ b/hw/xfree86/common/xf86Init.c
+@@ -74,7 +74,6 @@
+ #include "xf86Crtc.h"
+ #include "picturestr.h"
+ #include "randrstr.h"
+-#include "glxvndabi.h"
+ #include "xf86Bus.h"
+ #ifdef XSERVER_LIBPCIACCESS
+ #include "xf86VGAarbiter.h"
+-- 
+2.24.1
+
diff --git a/buildroot/package/x11r7/xserver_xorg-server/Config.in b/buildroot/package/x11r7/xserver_xorg-server/Config.in
index ed238d570..982b9bcb4 100644
--- a/buildroot/package/x11r7/xserver_xorg-server/Config.in
+++ b/buildroot/package/x11r7/xserver_xorg-server/Config.in
@@ -61,7 +61,7 @@ choice
 	bool "X Window System server version"
 
 config BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_20
-	bool "1.20.4"
+	bool "1.20.6"
 	select BR2_PACKAGE_XSERVER_XORG_SERVER_VIDEODRV_ABI_24
 	select BR2_PACKAGE_XLIB_LIBXFONT2
 
@@ -79,7 +79,7 @@ endchoice
 
 config BR2_PACKAGE_XSERVER_XORG_SERVER_VERSION
 	string
-	default "1.20.4" if BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_20
+	default "1.20.6" if BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_20
 	default "1.17.4" if BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_17
 	default "1.14.7" if BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14
 
diff --git a/buildroot/package/x11r7/xserver_xorg-server/xserver_xorg-server.hash b/buildroot/package/x11r7/xserver_xorg-server/xserver_xorg-server.hash
index 5c1beb137..cd1b56016 100644
--- a/buildroot/package/x11r7/xserver_xorg-server/xserver_xorg-server.hash
+++ b/buildroot/package/x11r7/xserver_xorg-server/xserver_xorg-server.hash
@@ -3,8 +3,11 @@ sha1   7a95765e56b124758fcd7b609589e65b8870880b                                x
 sha256 fcf66fa6ad86227613d2d3e8ae13ded297e2a1e947e9060a083eaf80d323451f        xorg-server-1.14.7.tar.bz2
 # From https://lists.x.org/archives/xorg-announce/2015-October/002650.html
 sha256 0c4b45c116a812a996eb432d8508cf26c2ec8c3916ff2a50781796882f8d6457        xorg-server-1.17.4.tar.bz2
-# From https://lists.x.org/archives/xorg-announce/2019-February/002957.html
-md5 c4841cc24b79420205d082fe82e0a650  xorg-server-1.20.4.tar.bz2
-sha1 1a79da92122124cb782a4eebfd83fd33d5c0d7d4  xorg-server-1.20.4.tar.bz2
-sha256 fe0fd493ebe93bfc56bede382fa204458ff5f636ea54d413a5d1bd58e19166ee  xorg-server-1.20.4.tar.bz2
-sha512 f1c92ef6d7613e0636973d3395b48dfdad42230847ab1c8b1cea84647a968f649f9aba97bdb01c10ee8351cbe954d4e6ca4a0fc84bb8fa662d49c8ba2aee00a8  xorg-server-1.20.4.tar.bz2
+# From https://lists.x.org/archives/xorg-announce/2019-November/003032.html
+md5 a98170084f2c8fed480d2ff601f8a14b  xorg-server-1.20.6.tar.bz2
+sha1 59473e72136113f3a35b1ab5a5cfcbcad955b660  xorg-server-1.20.6.tar.bz2
+sha256 6316146304e6e8a36d5904987ae2917b5d5b195dc9fc63d67f7aca137e5a51d1  xorg-server-1.20.6.tar.bz2
+sha512 9aa0ba4aee92fe628f2b8c41e4fe0134dc86154bb8787f907884ef2fd970e18e68e72ea8a1beb706d11ecf155b2abc9731f1abadff251ed592f8cca3b1240dd6  xorg-server-1.20.6.tar.bz2
+
+# Locally calculated
+sha256 4cc0447a22635c7b2f1a93fec4aa94f1970fadeb72a063de006b51cf4963a06f  COPYING
diff --git a/buildroot/package/x265/Config.in b/buildroot/package/x265/Config.in
index cc39d6c6a..180931db6 100644
--- a/buildroot/package/x265/Config.in
+++ b/buildroot/package/x265/Config.in
@@ -11,7 +11,7 @@ config BR2_PACKAGE_X265
 	  General Public License (GPL) 2 license or a commercial
 	  license, similar to the x264 project.
 
-	  http://x265.org
+	  https://bitbucket.org/multicoreware/x265/wiki/Home
 
 if BR2_PACKAGE_X265
 
diff --git a/buildroot/package/xen/xen.hash b/buildroot/package/xen/xen.hash
index 7a5241095..d4232f592 100644
--- a/buildroot/package/xen/xen.hash
+++ b/buildroot/package/xen/xen.hash
@@ -1,3 +1,3 @@
 # Locally computed
-sha256 be88cb2443761990efc1070d9718016561fe19066af232f9bfae572922897e59 xen-4.11.1.tar.gz
+sha256 3f9217f5a7cc240a06f3a03db8c29605d69a64d98330c426611ba5c2ee08b5d8 xen-4.11.2.tar.gz
 sha256 dba0d79260259c013c52e5d4daeaea564a2fbb9ff7fc6778c377a401ec3898de COPYING
diff --git a/buildroot/package/xen/xen.mk b/buildroot/package/xen/xen.mk
index d6e6c91cf..bd8a39f63 100644
--- a/buildroot/package/xen/xen.mk
+++ b/buildroot/package/xen/xen.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-XEN_VERSION = 4.11.1
+XEN_VERSION = 4.11.2
 XEN_SITE = https://downloads.xenproject.org/release/xen/$(XEN_VERSION)
 XEN_LICENSE = GPL-2.0
 XEN_LICENSE_FILES = COPYING
diff --git a/buildroot/package/xvisor/0001-x86-Fix-build-break-with-newer-GCC-7-x.patch b/buildroot/package/xvisor/0001-x86-Fix-build-break-with-newer-GCC-7-x.patch
new file mode 100644
index 000000000..668f9df71
--- /dev/null
+++ b/buildroot/package/xvisor/0001-x86-Fix-build-break-with-newer-GCC-7-x.patch
@@ -0,0 +1,34 @@
+From 48b056d958e0d9ae5758b9c927b48a2e1d98cbcd Mon Sep 17 00:00:00 2001
+From: Himanshu Chauhan 
+Date: Mon, 4 Dec 2017 18:29:09 +0530
+Subject: [PATCH] [x86] Fix build break with newer GCC (7.x)
+
+add -no-pie to C and LD flags. GCC 7.x for some reason
+doesn't like to mix 32-bit and 64-bit code and wants
+such code to be compiled with fPIC. Disable PIE from
+does the trick.
+
+Signed-off-by: Himanshu Chauhan 
+[Retrieved from:
+https://github.com/xvisor/xvisor/commit/48b056d958e0d9ae5758b9c927b48a2e1d98cbcd]
+Signed-off-by: Fabrice Fontaine 
+---
+ arch/x86/cpu/x86_64/objects.mk | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/arch/x86/cpu/x86_64/objects.mk b/arch/x86/cpu/x86_64/objects.mk
+index a3bed4641..1d6d5a2fb 100644
+--- a/arch/x86/cpu/x86_64/objects.mk
++++ b/arch/x86/cpu/x86_64/objects.mk
+@@ -21,8 +21,9 @@
+ # @author Himanshu Chauhan (hschauhan@nulltrace.org)
+ # @brief list of x86_64 object files.
+ # */
+-cpu-cflags +=-finline-functions -O0 -mcmodel=large
+-cpu-cppflags +=-DCPU_TEXT_LMA=${CONFIG_VAPOOL_ALIGN_MB}
++cpu-cflags +=-finline-functions -O0 -mcmodel=large -no-pie
++cpu-cppflags +=-DCPU_TEXT_LMA=${CONFIG_VAPOOL_ALIGN_MB} -no-pie
++cpu-ldflags += -no-pie
+ 
+ cpu-objs-y+= start.o
+ 
diff --git a/buildroot/package/yad/yad.mk b/buildroot/package/yad/yad.mk
index d674316cf..01bf334a7 100644
--- a/buildroot/package/yad/yad.mk
+++ b/buildroot/package/yad/yad.mk
@@ -9,7 +9,8 @@ YAD_SOURCE = yad-$(YAD_VERSION).tar.xz
 YAD_SITE = http://sourceforge.net/projects/yad-dialog/files
 YAD_LICENSE = GPL-3.0
 YAD_LICENSE_FILES = COPYING
-YAD_DEPENDENCIES = host-intltool host-pkgconf
+YAD_DEPENDENCIES = host-intltool host-pkgconf $(TARGET_NLS_DEPENDENCIES)
+YAD_CONF_ENV = LIBS=$(TARGET_NLS_LIBS)
 YAD_CONF_OPTS = --enable-html=no
 
 ifeq ($(BR2_PACKAGE_LIBGTK3_X11),y)
diff --git a/buildroot/package/yaffs2utils/yaffs2utils.mk b/buildroot/package/yaffs2utils/yaffs2utils.mk
index d3a8bdc9d..bcd5d6d66 100644
--- a/buildroot/package/yaffs2utils/yaffs2utils.mk
+++ b/buildroot/package/yaffs2utils/yaffs2utils.mk
@@ -6,7 +6,7 @@
 
 YAFFS2UTILS_VERSION = 0.2.9
 YAFFS2UTILS_SOURCE = $(YAFFS2UTILS_VERSION).tar.gz
-YAFFS2UTILS_SITE = https://yaffs2utils.googlecode.com/files
+YAFFS2UTILS_SITE = https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/yaffs2utils
 YAFFS2UTILS_LICENSE = GPL-2.0
 YAFFS2UTILS_LICENSE_FILES = COPYING
 
diff --git a/buildroot/package/zeromq/zeromq.hash b/buildroot/package/zeromq/zeromq.hash
index 5af6a3ff8..689d960b2 100644
--- a/buildroot/package/zeromq/zeromq.hash
+++ b/buildroot/package/zeromq/zeromq.hash
@@ -1,7 +1,7 @@
 # From https://github.com/zeromq/libzmq/releases
-md5  64cbf3577afdbfda30358bc757a6ac83  zeromq-4.3.1.tar.gz
-sha1 6cce22d830eaf95feff7cab00744df13ad7ab7f3  zeromq-4.3.1.tar.gz
+md5  2047e917c2cc93505e2579bcba67a573 zeromq-4.3.2.tar.gz
+sha1 e5253bff214f77621b3d29443f1aa6e5a106ffe5  zeromq-4.3.2.tar.gz
 # Locally computed
-sha256 bcbabe1e2c7d0eec4ed612e10b94b112dd5f06fcefa994a0c79a45d835cd21eb  zeromq-4.3.1.tar.gz
+sha256 ebd7b5c830d6428956b67a0454a7f8cbed1de74b3b01e5c33c5378e22740f763  zeromq-4.3.2.tar.gz
 sha256 4fd86507c9b486764343065a9e035222869a27b5789efeb4fd93edc85412d7a3  COPYING
 sha256 83f32abe61ee58ffb1b007412c08415168c052501dbf56d7a47aaaac52b03ef6  COPYING.LESSER
diff --git a/buildroot/package/zeromq/zeromq.mk b/buildroot/package/zeromq/zeromq.mk
index d799f863c..2c2e3e45b 100644
--- a/buildroot/package/zeromq/zeromq.mk
+++ b/buildroot/package/zeromq/zeromq.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-ZEROMQ_VERSION = 4.3.1
+ZEROMQ_VERSION = 4.3.2
 ZEROMQ_SITE = https://github.com/zeromq/libzmq/releases/download/v$(ZEROMQ_VERSION)
 ZEROMQ_INSTALL_STAGING = YES
 ZEROMQ_DEPENDENCIES = util-linux
diff --git a/buildroot/package/zip/0007-timezone.c-needs-time.h-fixes-musl-compile.patch b/buildroot/package/zip/0007-timezone.c-needs-time.h-fixes-musl-compile.patch
new file mode 100644
index 000000000..bdaa638f6
--- /dev/null
+++ b/buildroot/package/zip/0007-timezone.c-needs-time.h-fixes-musl-compile.patch
@@ -0,0 +1,38 @@
+From 68abba9fb2ed114ac35712756b1f7700a865c498 Mon Sep 17 00:00:00 2001
+From: Peter Seiderer 
+Date: Tue, 17 Dec 2019 21:25:01 +0100
+Subject: [PATCH] timezone.c: needs time.h (fixes musl compile)
+
+Fixes:
+
+  In file included from util.c:28:
+  timezone.c: In function 'mktime':
+  timezone.c:644:18: error: dereferencing pointer to incomplete type 'struct tm'
+       save_isdst = tm->tm_isdst;
+
+  timezone.c:661:11: warning: implicit declaration of function 'localtime'; did you mean 'dostime'? [-Wimplicit-function-declaration]
+       ltm = localtime(&then);
+
+  timezone.c:661:9: warning: assignment to 'struct tm *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
+       ltm = localtime(&then);
+
+Signed-off-by: Peter Seiderer 
+---
+ timezone.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/timezone.c b/timezone.c
+index 485ec02..18aecbd 100644
+--- a/timezone.c
++++ b/timezone.c
+@@ -41,6 +41,7 @@
+ #include "timezone.h"
+ #include 
+ #include 
++#include 
+ 
+ #ifdef IZTZ_DEFINESTDGLOBALS
+ long timezone = 0;
+-- 
+2.24.0
+
diff --git a/buildroot/package/znc/znc.hash b/buildroot/package/znc/znc.hash
index b685a7bf7..216d105f2 100644
--- a/buildroot/package/znc/znc.hash
+++ b/buildroot/package/znc/znc.hash
@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 1e4cc31837a1e8e6cc310873659a167cec16a3fd4281cbc3bf364e42352c113d  znc-1.7.3.tar.gz
+sha256 b1a32921a8e6d79ee6c5900c8d07293026966db7c05aaac48984231befc49b71  znc-1.7.4.tar.gz
 sha256 cfc7749b96f63bd31c3c42b5c471bf756814053e847c10f3eb003417bc523d30  LICENSE
diff --git a/buildroot/package/znc/znc.mk b/buildroot/package/znc/znc.mk
index fdc147a8a..24795886a 100644
--- a/buildroot/package/znc/znc.mk
+++ b/buildroot/package/znc/znc.mk
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-ZNC_VERSION = 1.7.3
+ZNC_VERSION = 1.7.4
 ZNC_SITE = http://znc.in/releases/archive
 ZNC_LICENSE = Apache-2.0
 ZNC_LICENSE_FILES = LICENSE
diff --git a/buildroot/support/dependencies/dependencies.sh b/buildroot/support/dependencies/dependencies.sh
index 60c63d774..be60257d1 100755
--- a/buildroot/support/dependencies/dependencies.sh
+++ b/buildroot/support/dependencies/dependencies.sh
@@ -271,6 +271,10 @@ if grep -q ^BR2_PACKAGE_WHOIS=y $BR2_CONFIG ; then
     required_perl_modules="$required_perl_modules autodie"
 fi
 
+if grep -q -E '^BR2_PACKAGE_(WEBKITGTK|WPEWEBKIT)=y' $BR2_CONFIG ; then
+    required_perl_modules="${required_perl_modules} JSON::PP"
+fi
+
 # This variable will keep the modules that are missing in your system.
 missing_perl_modules=""
 
diff --git a/buildroot/support/download/git b/buildroot/support/download/git
index 17ca04eb9..075f665bb 100755
--- a/buildroot/support/download/git
+++ b/buildroot/support/download/git
@@ -130,7 +130,7 @@ fi
 # scratch won't help, so we don't want to trash the repository for a
 # missing commit. We just exit without going through the ERR trap.
 if ! _git rev-parse --quiet --verify "'${cset}^{commit}'" >/dev/null 2>&1; then
-    printf "Commit '%s' does not exist in this repository\n." "${cset}"
+    printf "Commit '%s' does not exist in this repository.\n" "${cset}"
     exit 1
 fi
 
diff --git a/buildroot/support/misc/Buildroot.cmake b/buildroot/support/misc/Buildroot.cmake
index 9f5f56525..761b6d7ae 100644
--- a/buildroot/support/misc/Buildroot.cmake
+++ b/buildroot/support/misc/Buildroot.cmake
@@ -1,5 +1,6 @@
 # Impersonate a Linux system. Afterall, that's what we are...
 set(CMAKE_SYSTEM_NAME Linux)
+set(CMAKE_SYSTEM ${CMAKE_SYSTEM_NAME})
 include(Platform/Linux)
 
 # Override problematic settings, to avoid RPATH against host lib directories.
diff --git a/buildroot/support/scripts/check-kernel-headers.sh b/buildroot/support/scripts/check-kernel-headers.sh
index a8cca78b2..a8b94f6a0 100755
--- a/buildroot/support/scripts/check-kernel-headers.sh
+++ b/buildroot/support/scripts/check-kernel-headers.sh
@@ -1,14 +1,15 @@
 #!/bin/sh
 
-SYSROOT="${1}"
+BUILDDIR="${1}"
+SYSROOT="${2}"
 # Make sure we have enough version components
-HDR_VER="${2}.0.0"
+HDR_VER="${3}.0.0"
 
 HDR_M="${HDR_VER%%.*}"
 HDR_V="${HDR_VER#*.}"
 HDR_m="${HDR_V%%.*}"
 
-EXEC="$(mktemp -t check-headers.XXXXXX)"
+EXEC="$(mktemp -p "${BUILDDIR}" -t .check-headers.XXXXXX)"
 
 # We do not want to account for the patch-level, since headers are
 # not supposed to change for different patchlevels, so we mask it out.
diff --git a/buildroot/support/testing/infra/emulator.py b/buildroot/support/testing/infra/emulator.py
index 802e89d4b..093a643a8 100644
--- a/buildroot/support/testing/infra/emulator.py
+++ b/buildroot/support/testing/infra/emulator.py
@@ -38,7 +38,8 @@ class Emulator(object):
 
         qemu_cmd = ["qemu-system-{}".format(qemu_arch),
                     "-serial", "stdio",
-                    "-display", "none"]
+                    "-display", "none",
+                    "-m", "256"]
 
         if options:
             qemu_cmd += options
@@ -60,8 +61,12 @@ class Emulator(object):
                     qemu_cmd += ["-M", "vexpress-a9"]
                 elif arch == "armv5":
                     kernel = infra.download(self.downloaddir,
-                                            "kernel-versatile")
+                                            "kernel-versatile-4.19")
+                    dtb = infra.download(self.downloaddir,
+                                         "versatile-pb-4.19.dtb")
+                    qemu_cmd += ["-dtb", dtb]
                     qemu_cmd += ["-M", "versatilepb"]
+                    qemu_cmd += ["-device", "virtio-rng-pci"]
 
             qemu_cmd += ["-kernel", kernel]
 
diff --git a/buildroot/support/testing/tests/package/test_lua.py b/buildroot/support/testing/tests/package/test_lua.py
index 77358ba13..66ae85c99 100644
--- a/buildroot/support/testing/tests/package/test_lua.py
+++ b/buildroot/support/testing/tests/package/test_lua.py
@@ -12,7 +12,7 @@ class TestLuaBase(infra.basetest.BRTest):
 
     def login(self):
         cpio_file = os.path.join(self.builddir, "images", "rootfs.cpio")
-        self.emulator.boot(arch="armv7",
+        self.emulator.boot(arch="armv5",
                            kernel="builtin",
                            options=["-initrd", cpio_file])
         self.emulator.login()
diff --git a/buildroot/support/testing/tests/package/test_perl.py b/buildroot/support/testing/tests/package/test_perl.py
index 033b7cf34..37e7390a4 100644
--- a/buildroot/support/testing/tests/package/test_perl.py
+++ b/buildroot/support/testing/tests/package/test_perl.py
@@ -12,7 +12,7 @@ class TestPerlBase(infra.basetest.BRTest):
 
     def login(self):
         cpio_file = os.path.join(self.builddir, "images", "rootfs.cpio")
-        self.emulator.boot(arch="armv7",
+        self.emulator.boot(arch="armv5",
                            kernel="builtin",
                            options=["-initrd", cpio_file])
         self.emulator.login()
diff --git a/buildroot/system/Config.in b/buildroot/system/Config.in
index 498b56e22..b1aebf4ef 100644
--- a/buildroot/system/Config.in
+++ b/buildroot/system/Config.in
@@ -481,6 +481,8 @@ config BR2_TARGET_LOCALTIME
 	    Pacific/Wallis
 	    ...
 
+	  Set to empty to not install a default time zone.
+
 endif # BR2_TARGET_TZ_INFO
 
 config BR2_ROOTFS_USERS_TABLES
diff --git a/buildroot/toolchain/Config.in b/buildroot/toolchain/Config.in
index 87d7bc30b..e227d923a 100644
--- a/buildroot/toolchain/Config.in
+++ b/buildroot/toolchain/Config.in
@@ -124,6 +124,12 @@ config BR2_TOOLCHAIN_HAS_GCC_BUG_64735
 	default y if !BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS && \
 		!BR2_TOOLCHAIN_GCC_AT_LEAST_7
 
+# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68485. This bug still
+# exists in gcc 9.x
+config BR2_TOOLCHAIN_HAS_GCC_BUG_68485
+	bool
+	default y if BR2_microblaze
+
 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. This bug no
 # longer exists in gcc 8.x.
 config BR2_TOOLCHAIN_HAS_GCC_BUG_85180
@@ -398,10 +404,15 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20
 	bool
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_19
 
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
+	bool
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20
+
 # This order guarantees that the highest version is set, as kconfig
 # stops affecting a value on the first matching default.
 config BR2_TOOLCHAIN_HEADERS_AT_LEAST
 	string
+	default "5.4" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
 	default "4.20" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20
 	default "4.19" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_19
 	default "4.18" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_18
diff --git a/buildroot/toolchain/helpers.mk b/buildroot/toolchain/helpers.mk
index e5520c00c..3c30a8268 100644
--- a/buildroot/toolchain/helpers.mk
+++ b/buildroot/toolchain/helpers.mk
@@ -158,11 +158,12 @@ copy_toolchain_sysroot = \
 # Check the specified kernel headers version actually matches the
 # version in the toolchain.
 #
-# $1: sysroot directory
-# $2: kernel version string, in the form: X.Y
+# $1: build directory
+# $2: sysroot directory
+# $3: kernel version string, in the form: X.Y
 #
 check_kernel_headers_version = \
-	if ! support/scripts/check-kernel-headers.sh $(1) $(2); then \
+	if ! support/scripts/check-kernel-headers.sh $(1) $(2) $(3); then \
 		exit 1; \
 	fi
 
diff --git a/buildroot/toolchain/toolchain-buildroot/Config.in b/buildroot/toolchain/toolchain-buildroot/Config.in
index beb17a218..d8e39fdce 100644
--- a/buildroot/toolchain/toolchain-buildroot/Config.in
+++ b/buildroot/toolchain/toolchain-buildroot/Config.in
@@ -94,6 +94,8 @@ config BR2_TOOLCHAIN_BUILDROOT_MUSL
 	  This option selects musl as the C library for the
 	  cross-compilation toolchain.
 
+	  https://www.musl-libc.org/
+
 endchoice
 
 config BR2_TOOLCHAIN_BUILDROOT_LIBC
diff --git a/buildroot/toolchain/toolchain-external/pkg-toolchain-external.mk b/buildroot/toolchain/toolchain-external/pkg-toolchain-external.mk
index db3570d96..df0b68677 100644
--- a/buildroot/toolchain/toolchain-external/pkg-toolchain-external.mk
+++ b/buildroot/toolchain/toolchain-external/pkg-toolchain-external.mk
@@ -114,6 +114,10 @@ endif
 
 TOOLCHAIN_EXTERNAL_LIBS += ld*.so* libgcc_s.so.* libatomic.so.*
 
+ifneq ($(BR2_SSP_NONE),y)
+TOOLCHAIN_EXTERNAL_LIBS += libssp.so.*
+endif
+
 ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y)
 TOOLCHAIN_EXTERNAL_LIBS += libc.so.* libcrypt.so.* libdl.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.*
 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
@@ -527,6 +531,7 @@ define $(2)_CONFIGURE_CMDS
 	$$(Q)$$(call check_unusable_toolchain,$$(TOOLCHAIN_EXTERNAL_CC))
 	$$(Q)SYSROOT_DIR="$$(call toolchain_find_sysroot,$$(TOOLCHAIN_EXTERNAL_CC))" ; \
 	$$(call check_kernel_headers_version,\
+		$$(BUILD_DIR)\
 		$$(call toolchain_find_sysroot,$$(TOOLCHAIN_EXTERNAL_CC)),\
 		$$(call qstrip,$$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
 	$$(call check_gcc_version,$$(TOOLCHAIN_EXTERNAL_CC),\
diff --git a/buildroot/toolchain/toolchain-external/toolchain-external-custom/Config.in.options b/buildroot/toolchain/toolchain-external/toolchain-external-custom/Config.in.options
index 08a79ee4d..81c48a11b 100644
--- a/buildroot/toolchain/toolchain-external/toolchain-external-custom/Config.in.options
+++ b/buildroot/toolchain/toolchain-external/toolchain-external-custom/Config.in.options
@@ -123,6 +123,10 @@ choice
 	    m = ( LINUX_VERSION_CODE >> 8  ) & 0xFF
 	    p = ( LINUX_VERSION_CODE >> 0  ) & 0xFF
 
+config BR2_TOOLCHAIN_EXTERNAL_HEADERS_5_4
+	bool "5.4.x"
+	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_4
+
 config BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_20
 	bool "4.20.x"
 	select BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_20
diff --git a/buildroot/utils/check-package b/buildroot/utils/check-package
index ce1fe98d6..f09aaeea0 100755
--- a/buildroot/utils/check-package
+++ b/buildroot/utils/check-package
@@ -33,6 +33,7 @@ def parse_args():
                         default="http://nightly.buildroot.org/",
                         help="default: %(default)s")
     parser.add_argument("--verbose", "-v", action="count", default=0)
+    parser.add_argument("--quiet", "-q", action="count", default=0)
 
     # Now the debug options in the order they are processed.
     parser.add_argument("--include-only", dest="include_list", action="append",
@@ -177,8 +178,10 @@ def __main__():
     # (e.g. counted by 'wc'), so for stats use stderr. Wait all warnings are
     # printed, for the case there are many of them, before printing stats.
     sys.stdout.flush()
-    print("{} lines processed".format(total_lines), file=sys.stderr)
-    print("{} warnings generated".format(total_warnings), file=sys.stderr)
+
+    if not flags.quiet:
+        print("{} lines processed".format(total_lines), file=sys.stderr)
+        print("{} warnings generated".format(total_warnings), file=sys.stderr)
 
     if total_warnings > 0:
         sys.exit(1)
diff --git a/buildroot/utils/genrandconfig b/buildroot/utils/genrandconfig
index a2190d6d2..5f7aed021 100755
--- a/buildroot/utils/genrandconfig
+++ b/buildroot/utils/genrandconfig
@@ -39,14 +39,6 @@ def urlopen_closing(uri):
     return contextlib.closing(_urllib.urlopen(uri))
 
 
-if sys.hexversion >= 0x3000000:
-    def decode_byte_list(bl):
-        return [b.decode() for b in bl]
-else:
-    def decode_byte_list(e):
-        return e
-
-
 class SystemInfo:
     DEFAULT_NEEDED_PROGS = ["make", "git", "gcc", "timeout"]
     DEFAULT_OPTIONAL_PROGS = ["bzr", "java", "javac", "jar"]
@@ -128,7 +120,7 @@ def get_toolchain_configs(toolchains_csv, buildrootdir):
     with open(toolchains_csv) as r:
         # filter empty lines and comments
         lines = [t for t in r.readlines() if len(t.strip()) > 0 and t[0] != '#']
-        toolchains = decode_byte_list(lines)
+        toolchains = lines
     configs = []
 
     (_, _, _, _, hostarch) = os.uname()
diff --git a/buildroot/utils/scanpypi b/buildroot/utils/scanpypi
index 55b3d1e61..abb190a53 100755
--- a/buildroot/utils/scanpypi
+++ b/buildroot/utils/scanpypi
@@ -739,6 +739,8 @@ def main():
             package.create_hash_file()
 
             package.create_config_in()
+            print("NOTE: Remember to also make an update to the DEVELOPERS file")
+            print("      and include an entry for the pkg in packages/Config.in")
             print()
             # printing an empty line for visual confort
     finally:
diff --git a/buildroot/utils/test-pkg b/buildroot/utils/test-pkg
index cce4679b0..a317d8c17 100755
--- a/buildroot/utils/test-pkg
+++ b/buildroot/utils/test-pkg
@@ -12,18 +12,19 @@ do_clean() {
 
 main() {
     local o O opts
-    local cfg dir pkg random toolchains_dir toolchain all number mode
-    local ret nb nb_skip nb_fail nb_legal nb_tc build_dir
+    local cfg dir pkg random toolchains_csv toolchain all number mode
+    local ret nb nb_skip nb_fail nb_legal nb_tc build_dir keep
     local -a toolchains
     local pkg_br_name
 
-    o='hac:d:n:p:r:t:'
-    O='help,config-snippet:build-dir:package:,random:,toolchains-dir:'
+    o='hakc:d:n:p:r:t:'
+    O='help,all,keep,config-snippet:,build-dir:,number:,package:,random:,toolchains-csv:'
     opts="$(getopt -n "${my_name}" -o "${o}" -l "${O}" -- "${@}")"
     eval set -- "${opts}"
 
     random=0
     all=0
+    keep=0
     number=0
     mode=0
     toolchains_csv="${TOOLCHAINS_CSV}"
@@ -35,6 +36,9 @@ main() {
         (-a|--all)
             all=1; shift 1
             ;;
+        (-k|--keep)
+            keep=1; shift 1
+            ;;
         (-c|--config-snippet)
             cfg="${2}"; shift 2
             ;;
@@ -134,6 +138,8 @@ main() {
 
     printf "%d builds, %d skipped, %d build failed, %d legal-info failed\n" \
         ${nb} ${nb_skip} ${nb_fail} ${nb_legal}
+
+    return $((nb_fail + nb_legal))
 }
 
 build_one() {
@@ -176,6 +182,12 @@ build_one() {
     if ! make O="${dir}" legal-info >> "${dir}/logfile" 2>&1; then
         return 3
     fi
+
+    # If we get here, the build was successful. Clean up the build/host
+    # directories to save disk space, unless 'keep' was set.
+    if [ ${keep} -ne 1 ]; then
+        make O="${dir}" clean >> "${dir}/logfile" 2>&1
+    fi
 }
 
 help() {
@@ -236,6 +248,11 @@ Options:
         try. If not specified, the toolchains in ${TOOLCHAINS_CSV} will be
         used.
 
+    -k, --keep
+        Keep the build directories even if the build succeeds.
+        Note: the logfile and configuration is always retained, even without
+        this option.
+
 Example:
 
     Testing libcec would require a config snippet that contains:
diff --git a/scripts/enter.sh b/scripts/enter.sh
index 7e1cfdd5d..2950f6525 100755
--- a/scripts/enter.sh
+++ b/scripts/enter.sh
@@ -1,9 +1,11 @@
 #!/bin/bash
 BUILDER_UID="$(id -u)"
 BUILDER_GID="$(id -g)"
+CACHE_DIR="${CACHE_DIR:-$HOME/hassos-cache}"
 
+sudo mkdir -p "${CACHE_DIR}"
 sudo docker build -t hassos:local .
 sudo docker run -it --rm --privileged \
-  -v "$(pwd):/build" -v "${CACHE_DIR:=$HOME/hassos-cache}:/cache" \
+  -v "$(pwd):/build" -v "${CACHE_DIR}:/cache" \
   -e BUILDER_UID="${BUILDER_UID}" -e BUILDER_GID="${BUILDER_GID}" \
   hassos:local bash