diff --git a/Documentation/boards/odroid-xu4.md b/Documentation/boards/odroid-xu4.md
index 690dac532..c7c9d9914 100644
--- a/Documentation/boards/odroid-xu4.md
+++ b/Documentation/boards/odroid-xu4.md
@@ -5,13 +5,13 @@
 The Odroid XU4 has a hidden boot sector that is only visible on the Odroid itself (can't be written by a card reader). There are a couple possibilities:
 1) If the eMMC already had a working image before flashing HassOS:
 * It will be booting to uBoot (but no further). 
-** If you have the serial adapter, you should be able to enter `distro_bootcmd` at the uboot prompt to continue booting.
-** If not, flash the HassOS image to an SD card and boot off that temporarily (while the eMMC is also plugged in).
+    * If you have the serial adapter, you should be able to enter `distro_bootcmd` at the uboot prompt to continue booting.
+    * If not, flash the HassOS image to an SD card and boot off that temporarily (while the eMMC is also plugged in).
 * Once booted, login at the prompts and then enter `dd if=/dev/mmcblk0 of=/dev/mmcblk0boot0 bs=512 skip=63 seek=62 count=1440` at the linux prompt.
 * Reboot with eMMC (don't forget to flip the boot switch to eMMC)
 2) Clean/wiped/corruped boot sector:
-*You'll need to follow [Hardkernel's instructions](https://forum.odroid.com/viewtopic.php?f=53&t=6173) to get a working boot sector. Then flash HassOS and follow instructions above.
-*Alternatively, you can try flash HassOS to both an SD and eMMC, then boot off the SD with the eMMC also plugged in, then run `dd if=/dev/mmcblk1 of=/dev/mmcblk0boot0 bs=512 skip=1 seek=0 count=16381` at the Linux prompt. Note that this is untested, but in theory should work..
+* You'll need to follow [Hardkernel's instructions](https://forum.odroid.com/viewtopic.php?f=53&t=6173) to get a working boot sector. Then flash HassOS and follow instructions above.
+* Alternatively, you can try flash HassOS to both an SD and eMMC, then boot off the SD with the eMMC also plugged in, then run `dd if=/dev/mmcblk1 of=/dev/mmcblk0boot0 bs=512 skip=1 seek=0 count=16381` at the Linux prompt. Note that this is untested, but in theory should work..
 
 ## Console