diff --git a/Documentation/boards/odroid-c2.md b/Documentation/boards/odroid-c2.md
new file mode 100644
index 000000000..07d7ff3dc
--- /dev/null
+++ b/Documentation/boards/odroid-c2.md
@@ -0,0 +1,23 @@
+# Odroid-C2
+
+## eMMC
+
+eMMC support is provided transparently. Just flash the image to the eMMC board as you would an SD card.
+
+## Console
+
+By default, console access is granted over the serial header and over HDMI. Certain startup messages will only appear on the serial console by default. To cshow the messages on the HDMI console instead, swap the order of the two consoles in the `cmdline.txt` file on the boot partition. You can also delete the AML0 console if you don't plan on using the serial adapter.
+eg.
+ console=ttyAML0,115200n8 console=tty0
+
+## USB
+
+A long-standing kernel bug currently results in some odd behavior. To use the USB, a device must be plugged into one of the USB ports at hard boot. If all devices are removed from the USB ports, the USB will cease to function until a reboot.
+
+### OTG
+
+The OTG USB is untested.
+
+## GPIO
+
+Refer to [the odroid wiki](https://wiki.odroid.com/odroid-c2/hardware/expansion_connectors).
diff --git a/Documentation/kernel.md b/Documentation/kernel.md
index 30e7a6535..74cc1ff53 100644
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@@ -5,4 +5,4 @@
 |-------|---------|
 | Open Virtual Applicance | 4.14.59 |
 | Raspberry Pi | 4.14.58 |
-
+| Odroid-C2 | 4.14.36 |