Cleanup boot files & Kenrel 5.7.10 (#782)

* Odroid: Update kernel 5.7.10 * Cleanup boot files * Fix patches
2025-07-28 15:36:29 +00:00 · 2020-07-23 18:52:01 +02:00 · 2020-07-23 18:52:01 +02:00 · 8e42ad5536
commit 8e42ad5536
parent 39e78a1014
21 changed files with 9 additions and 322 deletions
--- a/Documentation/kernel.md
+++ b/Documentation/kernel.md
@ -12,7 +12,7 @@ Default Kernel tree: 5.4
 | Raspberry Pi 3 | 4.19.127 |
 | Raspberry Pi 4 | 4.19.127 |
 | Tinker Board | 5.4.50 |
-| Odroid-C2 | 5.7.7 |
-| Odroid-N2 | 5.7.7 |
-| Odroid-XU4 | 5.7.7 |
+| Odroid-C2 | 5.7.10 |
+| Odroid-N2 | 5.7.10 |
+| Odroid-XU4 | 5.7.10 |
 | Intel NUC | 5.4.50 |
--- a/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt
+++ b/buildroot-external/board/hardkernel/odroid-c2/boot-env.txt
@ -1,131 +0,0 @@
-
-
-# Custom modeline!
-# To use custom modeline you need to disable all the below resolutions
-# and setup your own!
-# For more information check our wiki:
-# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
-# Example below:
-#m=custombuilt
-#modeline=1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1
-
-# 480 Lines (720x480)
-#m=480i60hz
-#m=480i_rpt
-#m=480p60hz
-#m=480p_rpt
-
-# 576 Lines (720x576)
-#m=576i50hz
-#m=576i_rpt
-#m=576p50hz
-#m=576p_rpt
-
-# 720 Lines (1280x720)
-#m=720p50hz
-#m=720p60hz
-
-# 1080 Lines (1920x1080)
-#m=1080i60hz
-m=1080p60hz
-#m=1080i50hz
-#m=1080p50hz
-#m=1080p24hz
-
-# 4K (3840x2160)
-#m=2160p30hz
-#m=2160p25hz
-#m=2160p24hz
-#m=smpte24hz
-#m=2160p50hz
-#m=2160p60hz
-#m=2160p50hz420
-#m=2160p60hz420
-
-### VESA modes ###
-#m=640x480p60hz
-#m=800x480p60hz
-#m=480x800p60hz
-#m=800x600p60hz
-#m=1024x600p60hz
-#m=1024x768p60hz
-#m=1280x800p60hz
-#m=1280x1024p60hz
-#m=1360x768p60hz
-#m=1440x900p60hz
-#m=1600x900p60hz
-#m=1680x1050p60hz
-#m=1600x1200p60hz
-#m=1920x1200p60hz
-#m=2560x1080p60hz
-#m=2560x1440p60hz
-#m=2560x1600p60hz
-#m=3440x1440p60hz
-
-# HDMI BPP Mode
-m_bpp=32
-#m_bpp=24
-#m_bpp=16
-
-# HDMI DVI/VGA modes
-# By default its set to HDMI, if needed change below.
-# Uncomment only a single Line.
-#vout=dvi
-#vout=vga
-
-# HDMI HotPlug Detection control
-# Allows you to force HDMI thinking that the cable is connected.
-# true = HDMI will believe that cable is always connected
-# false = will let board/monitor negotiate the connection status
-#hpd=false
-hpd=true
-
-# Monitor output
-# Controls if HDMI PHY should output anything to the monitor
-monitor_onoff=false
-
-# Server Mode (aka. No Graphics)
-# Setting nographics to 1 will disable all video subsystem
-# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
-nographics=0
-
-# Meson Timer
-# 1 - Meson Timer
-# 0 - Arch Timer
-# Using meson_timer improves the video playback however it breaks KVM (virtualization).
-# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
-mesontimer=1
-
-# UHS (Ultra High Speed) MicroSD mode enable/disable
-disableuhs=false
-
-# MicroSD Card Detection enable/disable
-# Force the MMC controlled to believe that a card is connected.
-mmc_removable=true
-
-# USB Multi WebCam tweak
-# Only enable this if you use it.
-usbmulticam=false
-
-# CPU Frequency / Cores control
-###########################################
-### WARNING!!! WARNING!!! WARNING!!!
-# Before changing anything here please read the wiki entry:
-# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
-#
-# MAX CPU's
-#maxcpus=1
-#maxcpus=2
-#maxcpus=3
-maxcpus=4
-
-# MAX Frequency
-#max_freq=2016
-#max_freq=1944
-#max_freq=1944
-#max_freq=1920
-#max_freq=1896
-#max_freq=1752
-#max_freq=1680
-#max_freq=1656
-max_freq=1536
--- a/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-c2/hassos-hook.sh
@ -8,7 +8,6 @@ function hassos_pre_image() {
    local SPL_IMG="$(path_spl_img)"

    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/config.txt"
    cp "${BINARIES_DIR}/meson-gxbb-odroidc2.dtb" "${BOOT_DATA}/meson-gxbb-odroidc2.dtb"

    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
--- a/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-c2/uboot-boot.ush
@ -23,8 +23,7 @@ if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then
 fi

 # Board bootargs
-if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
-setenv bootargs_odroidc2 "no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
+setenv bootargs_odroidc2 ""

 # HassOS bootargs
 setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
--- a/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt
+++ b/buildroot-external/board/hardkernel/odroid-n2/boot-env.txt
@ -1,84 +0,0 @@
-
-
-# Custom modeline!
-# To use custom modeline you need to disable all the below resolutions
-# and setup your own!
-# For more information check our wiki:
-# https://wiki.odroid.com/odroid-n2/application_note/software/set_display_mode
-
-# HDMI Mode
-# Resolution Configuration
-#    Symbol             | Resolution
-# ----------------------+-------------
-#    "480x320p60hz"     | 480x320 Progressive 60Hz
-#    "480p60hz"         | 720x480 Progressive 60Hz
-#    "576p50hz"         | 720x576 Progressive 50Hz
-#    "720p60hz"         | 1280x720 Progressive 60Hz
-#    "720p50hz"         | 1280x720 Progressive 50Hz
-#    "1080p60hz"        | 1920x1080 Progressive 60Hz
-#    "1080p50hz"        | 1920x1080 Progressive 50Hz
-#    "1080p30hz"        | 1920x1080 Progressive 30Hz
-#    "1080p24hz"        | 1920x1080 Progressive 24Hz
-#    "1080i60hz"        | 1920x1080 Interlaced 60Hz
-#    "1080i50hz"        | 1920x1080 Interlaced 50Hz
-#    "2160p60hz"        | 3840x2160 Progressive 60Hz
-#    "2160p50hz"        | 3840x2160 Progressive 50Hz
-#    "2160p30hz"        | 3840x2160 Progressive 30Hz
-#    "2160p25hz"        | 3840x2160 Progressive 25Hz
-#    "2160p24hz"        | 3840x2160 Progressive 24Hz
-#    "smpte24hz"        | 3840x2160 Progressive 24Hz SMPTE
-#    "2160p60hz420"     | 3840x2160 Progressive 60Hz YCbCr 4:2:0
-#    "2160p50hz420"     | 3840x2160 Progressive 50Hz YCbCr 4:2:0
-#    "640x480p60hz"     | 640x480 Progressive 60Hz
-#    "800x480p60hz"     | 800x480 Progressive 60Hz
-#    "800x600p60hz"     | 800x600 Progressive 60Hz
-#    "1024x600p60hz"    | 1024x600 Progressive 60Hz
-#    "1024x768p60hz"    | 1024x768 Progressive 60Hz
-#    "1280x800p60hz"    | 1280x800 Progressive 60Hz
-#    "1280x1024p60hz"   | 1280x1024 Progressive 60Hz
-#    "1360x768p60hz"    | 1360x768 Progressive 60Hz
-#    "1440x900p60hz"    | 1440x900 Progressive 60Hz
-#    "1600x900p60hz"    | 1600x900 Progressive 60Hz
-#    "1600x1200p60hz"   | 1600x1200 Progressive 60Hz
-#    "1680x1050p60hz"   | 1680x1050 Progressive 60Hz
-#    "1920x1200p60hz"   | 1920x1200 Progressive 60Hz
-#    "2560x1080p60hz"   | 2560x1080 Progressive 60Hz
-#    "2560x1440p60hz"   | 2560x1440 Progressive 60Hz
-#    "2560x1600p60hz"   | 2560x1600 Progressive 60Hz
-#    "3440x1440p60hz"   | 3440x1440 Progressive 60Hz
-hdmimode=1080p60hz
- 
-# Overscan percentage
-# This value scales down the actual screen size by the percentage below
-# valid range is 80 to 100
-overscan=100
- 
-### voutmode : hdmi or dvi
-#voutmode=dvi
-voutmode=hdmi
- 
-# HPD enable/disable option
-disablehpd="false"
- 
-# max cpu frequency for big core, A73 in MHz unit
-# 1.8 GHz, default value
-#max_freq_a73=2004  # 2.004 GHz
-#max_freq_a73=1908  # 1.908 GHz
-#max_freq_a73=1704  # 1.704 GHz
-max_freq_a73=1800
- 
-# max cpu frequency for little core, A53 in MHz unit
-# 1.896 GHz, default value
-#max_freq_a53=1992  # 1.992 GHz
-#max_freq_a53=1704  # 1.704 GHz
-max_freq_a53=1896
- 
- 
-# max cpu-cores
-# Note:
-# CPU's 0 and 1 are the A53 (small cores)
-# CPU's 2 to 5 are the A73 (big cores)
-# Lowering this value disables only the bigger cores (the last cores).
-#maxcpus=4
-#maxcpus=5
-maxcpus=6
--- a/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-n2/hassos-hook.sh
@ -7,7 +7,6 @@ function hassos_pre_image() {
    local SPL_IMG="$(path_spl_img)"

    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/config.txt"
    cp "${BINARIES_DIR}/meson-g12b-odroid-n2.dtb" "${BOOT_DATA}/meson-g12b-odroid-n2.dtb"

    echo "console=tty0 console=ttyAML0,115200n8" > "${BOOT_DATA}/cmdline.txt"
--- a/buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-n2/uboot-boot.ush
@ -23,10 +23,7 @@ if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then
 fi

 # Board bootargs
-if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
- 
-# Boot Args
-setenv bootargs_odroidn2 "clk_ignore_unused hdmimode=${hdmimode} cvbsmode=576cvbs max_freq_a53=${max_freq_a53} max_freq_a73=${max_freq_a73} maxcpus=${maxcpus} ${cmode} voutmode=${voutmode} disablehpd=${disablehpd} overscan=${overscan}"
+setenv bootargs_odroidn2 ""

 # HassOS bootargs
 setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
--- a/buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt
+++ b/buildroot-external/board/hardkernel/odroid-xu4/boot-env.txt
@ -1,40 +0,0 @@
-
-macaddr=00:1e:06:61:7a:39
-vout=hdmi
-# - DVI Mode (disables sound over HDMI as per DVI compat)
-# vout=dvi
-
-# --- HDMI CEC Configuration ---
-# ------------------------------------------
-cecenable=false
-# set to true to enable HDMI CEC
-
-# Enable/Disable ODROID-VU7 Touchsreen
-disable_vu7=false
-
-# DRAM Frequency
-# Sets the LPDDR3 memory frequency
-# Supported values: 933 825 728 633 (MHZ)
-ddr_freq=825
-
-# External watchdog board enable
-external_watchdog=false
-# debounce time set to 3 ~ 10 sec, default 3 sec
-external_watchdog_debounce=3
-
-
-#------------------------------------------------------------------------------
-#
-# HDMI Hot Plug detection
-#
-#------------------------------------------------------------------------------
-#
-# Forces the HDMI subsystem to ignore the check if the cable is connected or
-# not.
-# false : disable the detection and force it as connected.
-# true : let cable, board and monitor decide the connection status.
-#
-# default: true
-#
-#------------------------------------------------------------------------------
-HPD=true
--- a/buildroot-external/board/hardkernel/odroid-xu4/hassos-hook.sh
+++ b/buildroot-external/board/hardkernel/odroid-xu4/hassos-hook.sh
@ -10,7 +10,6 @@ function hassos_pre_image() {
    local spl_img="$(path_spl_img)"

    cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
-    cp "${BOARD_DIR}/boot-env.txt" "${BOOT_DATA}/config.txt"
    cp "${BINARIES_DIR}/exynos5422-odroidxu4.dtb" "${BOOT_DATA}/exynos5422-odroidxu4.dtb"

    echo "console=tty1 console=ttySAC2,115200" > "${BOOT_DATA}/cmdline.txt"
--- a/buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush
+++ b/buildroot-external/board/hardkernel/odroid-xu4/uboot-boot.ush
@ -25,12 +25,7 @@ if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then
 fi

 # Board bootargs
-setenv hdmi_phy_control "HPD=${HPD} vout=${vout}"
-if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
-if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
-if test "${external_watchdog}" = "true"; then setenv external_watchdog "external_watchdog=${external_watchdog} external_watchdog_debounce=${external_watchdog_debounce}"; fi
-
-setenv bootargs_odroidxu4 "${videoconfig} ${hdmi_phy_control} ${hid_quirks} smsc95xx.macaddr=${macaddr} ${external_watchdog}"
+setenv bootargs_odroidxu4 ""

 # HassOS bootargs
 setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor systemd.machine_id=${MACHINE_ID} cgroup_enable=memory"
--- a/buildroot-external/board/hardkernel/patches/linux/0001-arm64-defconfig-enable-meson-gx-audio-as-module.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0001-arm64-defconfig-enable-meson-gx-audio-as-module.patch
--- a/buildroot-external/board/hardkernel/patches/linux/0001-mmc-meson-gx-limit-segments-to-1-when-dram-access-qu.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0001-mmc-meson-gx-limit-segments-to-1-when-dram-access-qu.patch
@ -1,46 +0,0 @@
-From bbafdffacb88adb701ca2f37f3169df4c9ac3824 Mon Sep 17 00:00:00 2001
-From: Neil Armstrong <narmstrong@baylibre.com>
-Date: Mon, 8 Jun 2020 10:44:58 +0200
-Subject: [PATCH 1/8] mmc: meson-gx: limit segments to 1 when dram-access-quirk
- is needed
-
-The actual max_segs computation leads to failure while using the broadcom
-sdio brcmfmac/bcmsdh driver, since the driver tries to make usage of scatter
-gather.
-
-But with the dram-access-quirk we use a 1,5K SRAM bounce buffer, and the
-max_segs current value of 3 leads to max transfers to 4,5k, which doesn't work.
-
-This patch sets max_segs to 1 to better describe the hardware limitation,
-and fix the SDIO functionnality with the brcmfmac/bcmsdh driver on Amlogic
-G12A/G12B SoCs on boards like SEI510 or Khadas VIM3.
-
-Reported-by: Art Nikpal <art@khadas.com>
-Reported-by: Christian Hewitt <christianshewitt@gmail.com>
-Fixes: acdc8e71d9bb ("mmc: meson-gx: add dram-access-quirk")
-Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
- drivers/mmc/host/meson-gx-mmc.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
-index 35400cf2a2e4..cfaf8e7e22ec 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
-+++ b/drivers/mmc/host/meson-gx-mmc.c
-@@ -1143,9 +1143,11 @@ static int meson_mmc_probe(struct platform_device *pdev)
- 
- 	mmc->caps |= MMC_CAP_CMD23;
- 	if (host->dram_access_quirk) {
-+		/* Limit segments to 1 due to low available sram memory */
-+		mmc->max_segs = 1;
- 		/* Limit to the available sram memory */
-		mmc->max_segs = SD_EMMC_SRAM_DATA_BUF_LEN / mmc->max_blk_size;
-		mmc->max_blk_count = mmc->max_segs;
-+		mmc->max_blk_count = SD_EMMC_SRAM_DATA_BUF_LEN /
-+				     mmc->max_blk_size;
- 	} else {
- 		mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
- 		mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
-- 
-2.17.1
-
--- a/buildroot-external/board/hardkernel/patches/linux/0002-ASoC-meson-imply-acodec-glue-on-axg-sound-card.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0002-ASoC-meson-imply-acodec-glue-on-axg-sound-card.patch
--- a/buildroot-external/board/hardkernel/patches/linux/0003-ASoC-meson-gx-card-fix-sound-dai-dt-schema.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0003-ASoC-meson-gx-card-fix-sound-dai-dt-schema.patch
--- a/buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-g12-add-internal-DAC.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0004-arm64-dts-meson-g12-add-internal-DAC.patch
--- a/buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-g12-add-internal-DAC-glue.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0005-arm64-dts-meson-g12-add-internal-DAC-glue.patch
--- a/buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-enable-audio-loopback.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0006-arm64-dts-meson-g12b-odroid-n2-enable-audio-loopback.patch
--- a/buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-odroid-n2-add-jack-audio-output-supp.patch
+++ b/buildroot-external/board/hardkernel/patches/linux/0007-arm64-dts-meson-odroid-n2-add-jack-audio-output-supp.patch
--- a/buildroot-external/configs/odroid_c2_defconfig
+++ b/buildroot-external/configs/odroid_c2_defconfig
@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-c2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.10"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
--- a/buildroot-external/configs/odroid_n2_defconfig
+++ b/buildroot-external/configs/odroid_n2_defconfig
@ -22,7 +22,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-n2/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.10"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/kernel-amlogic.config"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
--- a/buildroot-external/configs/odroid_xu4_defconfig
+++ b/buildroot-external/configs/odroid_xu4_defconfig
@ -23,7 +23,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
 BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4 $(BR2_EXTERNAL_HASSOS_PATH)/board/hardkernel/odroid-xu4/hassos-hook.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.10"
 BR2_LINUX_KERNEL_DEFCONFIG="exynos"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config"
 BR2_LINUX_KERNEL_LZ4=y