mirror of
https://github.com/home-assistant/operating-system.git
synced 2025-07-27 06:56:29 +00:00
* Use upstream Linux driver for Bluetooth on ASUS Tinker * Drop unnecessary Bluetooth initialization systemd service Bluetooth is now entirely handled by the kernel.
This commit is contained in:
Stefan Agner
GitHub
parent
4a42d578fe
commit
ba8bda73fa
@ -1517,7 +1517,7 @@ CONFIG_BT_HCIBTUSB=y
|
||||
CONFIG_BT_HCIBTUSB_BCM=y
|
||||
CONFIG_BT_HCIBTUSB_RTL=y
|
||||
CONFIG_BT_HCIBTSDIO=y
|
||||
CONFIG_BT_HCIUART=y
|
||||
CONFIG_BT_HCIUART=m
|
||||
CONFIG_BT_HCIUART_SERDEV=y
|
||||
CONFIG_BT_HCIUART_H4=y
|
||||
# CONFIG_BT_HCIUART_NOKIA is not set
|
||||
@ -1527,6 +1527,7 @@ CONFIG_BT_HCIUART_ATH3K=y
|
||||
CONFIG_BT_HCIUART_3WIRE=y
|
||||
# CONFIG_BT_HCIUART_INTEL is not set
|
||||
# CONFIG_BT_HCIUART_BCM is not set
|
||||
CONFIG_BT_HCIUART_RTL=y
|
||||
# CONFIG_BT_HCIUART_QCA is not set
|
||||
# CONFIG_BT_HCIUART_AG6XX is not set
|
||||
# CONFIG_BT_HCIUART_MRVL is not set
|
||||
@ -2474,7 +2475,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
|
||||
# CONFIG_SERIAL_ST_ASC is not set
|
||||
CONFIG_SERIAL_DEV_BUS=y
|
||||
# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
|
||||
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
|
||||
# CONFIG_TTY_PRINTK is not set
|
||||
# CONFIG_HVC_DCC is not set
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
@ -1,64 +0,0 @@
|
||||
From 2ae3821fd824560ef2db3c87cfbec985177911f6 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599249626.git.stefan@agner.ch>
|
||||
From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
|
||||
Date: Mon, 5 Nov 2018 22:03:26 +0100
|
||||
Subject: [PATCH 1/2] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
|
||||
|
||||
The most essential being the RTS pin, which is clearly needed to
|
||||
upload the initial configuration into the Realtek Bluetooth
|
||||
chip, and make the Bluetooth chip work.
|
||||
|
||||
Now, the Bluetooth chip also needs 3 other GPIOS to be enabled.
|
||||
I'll see how I do that through the DTS file in a near future.
|
||||
|
||||
The 3 GPIOS being :
|
||||
Bluetooth Reset : <&gpio4 29 GPIO_ACTIVE_HIGH>
|
||||
Bluetooth Wake : <&gpio4 26 GPIO_ACTIVE_HIGH>
|
||||
Bluetooth Wake_Host_IRQ : <&gpio4 31 GPIO_ACTIVE_HIGH>
|
||||
|
||||
These are currently setup manually, through scripts. But it seems that
|
||||
GPIO handling through /sys entries might not be possible in the long
|
||||
term, the replacement being libgpio.
|
||||
Anyway, if you're interesting in enabling the Bluetooth GPIO by hand,
|
||||
here are the commands :
|
||||
|
||||
cd /sys/class/gpio &&
|
||||
echo 146 > export &&
|
||||
echo 149 > export &&
|
||||
echo 151 > export &&
|
||||
echo high > gpio146/direction &&
|
||||
echo high > gpio149/direction &&
|
||||
echo high > gpio151/direction
|
||||
|
||||
Resetting the chip is done like this :
|
||||
|
||||
echo "Resetting the Bluetooth chip"
|
||||
cd /sys/class/gpio/gpio149 &&
|
||||
echo 0 > value &&
|
||||
sleep 1 &&
|
||||
echo 1 > value &&
|
||||
sleep 1
|
||||
|
||||
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
|
||||
[move change to rk3288-tinker.dtsi]
|
||||
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
||||
---
|
||||
arch/arm/boot/dts/rk3288-tinker.dtsi | 2 ++
|
||||
1 file changed, 2 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
index acfaa12ec239..284e7982925d 100644
|
||||
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
@@ -492,6 +492,8 @@ &tsadc {
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
--
|
||||
2.28.0
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
From 3f3c4cd047234fb94de4d6b701d05ff0450890cf Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <3f3c4cd047234fb94de4d6b701d05ff0450890cf.1613588152.git.stefan@agner.ch>
|
||||
From ff0c5c49024da05b47d4fcc4d115761c43eef7a6 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: Stefan Agner <stefan@agner.ch>
|
||||
Date: Wed, 17 Feb 2021 19:55:41 +0100
|
||||
Subject: [PATCH] Revert "ARM: dts: rockchip: use DMA channels for UARTs for
|
||||
@ -11,10 +11,10 @@ This reverts commit 3425fe335c29310f6628faf9a7947d07f32d8962.
|
||||
1 file changed, 8 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
|
||||
index 8fa80facc8cd..8636d95c45e1 100644
|
||||
index 4dcdcf17c977..ff6faa82192b 100644
|
||||
--- a/arch/arm/boot/dts/rk3288.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288.dtsi
|
||||
@@ -422,8 +422,6 @@ uart0: serial@ff180000 {
|
||||
@@ -378,8 +378,6 @@ uart0: serial@ff180000 {
|
||||
reg-io-width = <4>;
|
||||
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
@ -23,7 +23,7 @@ index 8fa80facc8cd..8636d95c45e1 100644
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer>;
|
||||
status = "disabled";
|
||||
@@ -437,8 +435,6 @@ uart1: serial@ff190000 {
|
||||
@@ -393,8 +391,6 @@ uart1: serial@ff190000 {
|
||||
reg-io-width = <4>;
|
||||
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
@ -32,7 +32,7 @@ index 8fa80facc8cd..8636d95c45e1 100644
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_xfer>;
|
||||
status = "disabled";
|
||||
@@ -465,8 +461,6 @@ uart3: serial@ff1b0000 {
|
||||
@@ -421,8 +417,6 @@ uart3: serial@ff1b0000 {
|
||||
reg-io-width = <4>;
|
||||
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
@ -41,7 +41,7 @@ index 8fa80facc8cd..8636d95c45e1 100644
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_xfer>;
|
||||
status = "disabled";
|
||||
@@ -480,8 +474,6 @@ uart4: serial@ff1c0000 {
|
||||
@@ -436,8 +430,6 @@ uart4: serial@ff1c0000 {
|
||||
reg-io-width = <4>;
|
||||
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
|
||||
clock-names = "baudclk", "apb_pclk";
|
||||
@ -51,5 +51,5 @@ index 8fa80facc8cd..8636d95c45e1 100644
|
||||
pinctrl-0 = <&uart4_xfer>;
|
||||
status = "disabled";
|
||||
--
|
||||
2.30.1
|
||||
2.36.1
|
||||
|
||||
|
||||
@ -1,10 +1,10 @@
|
||||
From fc25c993bf2feb6e66d55bf03eb725ec688e47eb Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <fc25c993bf2feb6e66d55bf03eb725ec688e47eb.1599250914.git.stefan@agner.ch>
|
||||
In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
|
||||
References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
|
||||
From e73b4b762a0842cc75b2784e4c4267f6f4fc50c4 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <e73b4b762a0842cc75b2784e4c4267f6f4fc50c4.1652225232.git.stefan@agner.ch>
|
||||
In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
|
||||
Date: Mon, 5 Nov 2018 22:15:14 +0100
|
||||
Subject: [PATCH 2/3] ARM: DTS: rk3288-tinker: Defining the SPI interface
|
||||
Subject: [PATCH] ARM: DTS: rk3288-tinker: Defining the SPI interface
|
||||
|
||||
Taken from, and tested by @TonyMac32 .
|
||||
|
||||
@ -21,7 +21,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
|
||||
1 file changed, 19 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
index 284e7982925d..d6cc66ab5bb1 100644
|
||||
index 9c1e38c54eae..cf278bcc91ad 100644
|
||||
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
@@ -485,6 +485,25 @@ &sdio0 {
|
||||
@ -51,5 +51,5 @@ index 284e7982925d..d6cc66ab5bb1 100644
|
||||
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
||||
--
|
||||
2.28.0
|
||||
2.36.1
|
||||
|
||||
|
||||
@ -1,10 +1,10 @@
|
||||
From 3a9d71847ae869ffdb2b0818aa86a36d57d96331 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <3a9d71847ae869ffdb2b0818aa86a36d57d96331.1599250914.git.stefan@agner.ch>
|
||||
In-Reply-To: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
|
||||
References: <2ae3821fd824560ef2db3c87cfbec985177911f6.1599250914.git.stefan@agner.ch>
|
||||
From 00de5155d12a178b83961f459ddccd7fa08ec25c Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <00de5155d12a178b83961f459ddccd7fa08ec25c.1652225232.git.stefan@agner.ch>
|
||||
In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: Stefan Agner <stefan@agner.ch>
|
||||
Date: Fri, 4 Sep 2020 21:57:55 +0200
|
||||
Subject: [PATCH 3/3] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
|
||||
Subject: [PATCH] ARM: dts: rockchip: enable I2C1/4 on rk3288-tinker
|
||||
|
||||
Enable I2C devices which are accessible via 40-pin header.
|
||||
|
||||
@ -14,7 +14,7 @@ Signed-off-by: Stefan Agner <stefan@agner.ch>
|
||||
1 file changed, 8 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
index d6cc66ab5bb1..7af5818ac77c 100644
|
||||
index cf278bcc91ad..f23c6efd39d4 100644
|
||||
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
@@ -344,10 +344,18 @@ regulator-state-mem {
|
||||
@ -37,5 +37,5 @@ index d6cc66ab5bb1..7af5818ac77c 100644
|
||||
status = "okay";
|
||||
};
|
||||
--
|
||||
2.28.0
|
||||
2.36.1
|
||||
|
||||
|
||||
@ -1,7 +1,10 @@
|
||||
From 062488e4b8fd552c01e1104b3bc91a6f7ffe6c41 Mon Sep 17 00:00:00 2001
|
||||
From e45da42e71e4f92995d5ec11679ca00b0971dbfe Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <e45da42e71e4f92995d5ec11679ca00b0971dbfe.1652225232.git.stefan@agner.ch>
|
||||
In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: Myy Miouyouyou <myy@miouyouyou.fr>
|
||||
Date: Thu, 19 Oct 2017 21:24:47 +0200
|
||||
Subject: [PATCH 10/28] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
|
||||
Subject: [PATCH] RK3288: DTSI: rk3288.dtsi: Add missing SPI2 pinctrl
|
||||
|
||||
The spi2_cs1 pin reference is missing in the spi2 first pin control
|
||||
definition.
|
||||
@ -14,10 +17,10 @@ Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
|
||||
index 5b789528..9ed532cc 100644
|
||||
index ff6faa82192b..5061c5418d75 100644
|
||||
--- a/arch/arm/boot/dts/rk3288.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288.dtsi
|
||||
@@ -334,7 +334,7 @@
|
||||
@@ -311,7 +311,7 @@ spi2: spi@ff130000 {
|
||||
dma-names = "tx", "rx";
|
||||
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
@ -27,5 +30,5 @@ index 5b789528..9ed532cc 100644
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
--
|
||||
2.11.0
|
||||
2.36.1
|
||||
|
||||
@ -1,4 +1,7 @@
|
||||
From ebc29962ac27264772a4227f5abd6900cb72fa79 Mon Sep 17 00:00:00 2001
|
||||
From e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <e33d3ba4c34d0893d9d07b62ad4eea41d2e8bbc0.1652225232.git.stefan@agner.ch>
|
||||
In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
|
||||
Date: Mon, 5 Nov 2018 20:16:05 +0100
|
||||
Subject: [PATCH] ARM: DTSI: rk3288-tinker: Improving the CPU max voltage
|
||||
@ -11,10 +14,10 @@ Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
index aa107ee41..3da1c830f 100644
|
||||
index f23c6efd39d4..cdff130d1292 100644
|
||||
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
@@ -164,7 +164,7 @@
|
||||
@@ -186,7 +186,7 @@ vdd_cpu: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
@ -24,5 +27,5 @@ index aa107ee41..3da1c830f 100644
|
||||
regulator-ramp-delay = <6000>;
|
||||
regulator-state-mem {
|
||||
--
|
||||
2.16.4
|
||||
2.36.1
|
||||
|
||||
@ -1,4 +1,7 @@
|
||||
From 302cd9b8a9f1f8a7735fabea3b9a7645dc40f9cc Mon Sep 17 00:00:00 2001
|
||||
From e073d75cd0dbfbcbbf1b46e565b326db37b75e6a Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <e073d75cd0dbfbcbbf1b46e565b326db37b75e6a.1652225232.git.stefan@agner.ch>
|
||||
In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: Myy Miouyouyou <myy@miouyouyou.fr>
|
||||
Date: Sun, 7 Jan 2018 01:52:44 +0100
|
||||
Subject: [PATCH] drivers: mmc: dw-mci-rockchip: Handle ASUS Tinkerboard reboot
|
||||
@ -17,14 +20,14 @@ similar effects with eMMC hardware.
|
||||
|
||||
Signed-off-by: Myy Miouyouyou <myy@miouyouyou.fr>
|
||||
---
|
||||
drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++++++++++
|
||||
drivers/mmc/host/dw_mmc-rockchip.c | 66 ++++++++++++++++++++++++++++++
|
||||
1 file changed, 66 insertions(+)
|
||||
|
||||
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
|
||||
index a3f1c2b30..7eac1f221 100644
|
||||
index d36991acd6df..a526927e29df 100644
|
||||
--- a/drivers/mmc/host/dw_mmc-rockchip.c
|
||||
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
|
||||
@@ -16,6 +16,11 @@
|
||||
@@ -12,6 +12,11 @@
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
@ -36,7 +39,7 @@ index a3f1c2b30..7eac1f221 100644
|
||||
#include "dw_mmc.h"
|
||||
#include "dw_mmc-pltfm.h"
|
||||
|
||||
@@ -334,6 +339,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
|
||||
@@ -330,6 +335,66 @@ static const struct of_device_id dw_mci_rockchip_match[] = {
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
|
||||
|
||||
@ -103,7 +106,7 @@ index a3f1c2b30..7eac1f221 100644
|
||||
static int dw_mci_rockchip_probe(struct platform_device *pdev)
|
||||
{
|
||||
const struct dw_mci_drv_data *drv_data;
|
||||
@@ -361,6 +426,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
|
||||
@@ -357,6 +422,7 @@ static int dw_mci_rockchip_probe(struct platform_device *pdev)
|
||||
}
|
||||
|
||||
pm_runtime_put_autosuspend(&pdev->dev);
|
||||
@ -112,5 +115,5 @@ index a3f1c2b30..7eac1f221 100644
|
||||
return 0;
|
||||
}
|
||||
--
|
||||
2.14.1
|
||||
2.36.1
|
||||
|
||||
@ -0,0 +1,63 @@
|
||||
From 392472dc977300a9f2a62159c105a6dfed878643 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <392472dc977300a9f2a62159c105a6dfed878643.1652225232.git.stefan@agner.ch>
|
||||
In-Reply-To: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
References: <ff0c5c49024da05b47d4fcc4d115761c43eef7a6.1652225232.git.stefan@agner.ch>
|
||||
From: Stefan Agner <stefan@agner.ch>
|
||||
Date: Tue, 10 May 2022 22:57:26 +0200
|
||||
Subject: [PATCH] ARM: dts: rockchip: Add Bluetooth to rk3288-tinker
|
||||
|
||||
Enable Bluetooth support via UART0. Use the existing bindings
|
||||
for Realtek rtl8723bs Bluetooth device.
|
||||
|
||||
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
||||
---
|
||||
arch/arm/boot/dts/rk3288-tinker.dtsi | 26 ++++++++++++++++++++++++++
|
||||
1 file changed, 26 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
index cdff130d1292..e904c130dedc 100644
|
||||
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
|
||||
@@ -388,6 +388,20 @@ bl_en: bl-en {
|
||||
};
|
||||
};
|
||||
|
||||
+ bluetooth {
|
||||
+ bt_enable_pin: bt-enable-pin {
|
||||
+ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_device_wake_pin: bt-device-wake-pin {
|
||||
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ bt_host_wake_pin: bt-host-wake-pin {
|
||||
+ rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
buttons {
|
||||
pwrbtn: pwrbtn {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
@@ -520,6 +534,18 @@ &tsadc {
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
||||
+ uart-has-rtscts;
|
||||
+
|
||||
+ bluetooth {
|
||||
+ compatible = "realtek,rtl8723bs-bt";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&bt_device_wake_pin &bt_host_wake_pin &bt_enable_pin>;
|
||||
+ enable-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
+ device-wake-gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
+ host-wake-gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
--
|
||||
2.36.1
|
||||
|
||||
@ -1,98 +0,0 @@
|
||||
From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
|
||||
From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
|
||||
Date: Mon, 5 Nov 2018 21:58:56 +0100
|
||||
Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
|
||||
|
||||
Adding the appropriate nodes in order to exploit the WiFi capabilities
|
||||
of the board.
|
||||
Since these capabilities are provided through SDIO, and the SDIO
|
||||
nodes were not defined, these were added too.
|
||||
|
||||
These seems to depend on each other so they are added in one big
|
||||
patch.
|
||||
|
||||
Split if necessary.
|
||||
|
||||
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
|
||||
---
|
||||
arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 62 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
|
||||
index 1e43527aa..d4df13bed 100644
|
||||
--- a/arch/arm/boot/dts/rk3288-tinker.dts
|
||||
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
|
||||
@@ -6,8 +6,70 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3288-tinker.dtsi"
|
||||
+#include <dt-bindings/clock/rockchip,rk808.h>
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3288 Asus Tinker Board";
|
||||
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
|
||||
+
|
||||
+ /* This is essential to get SDIO devices working.
|
||||
+ The Wifi depends on SDIO ! */
|
||||
+ sdio_pwrseq: sdio-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ clocks = <&rk808 RK808_CLKOUT1>;
|
||||
+ clock-names = "ext_clock";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
|
||||
+
|
||||
+ /*
|
||||
+ * On the module itself this is one of these (depending
|
||||
+ * on the actual card populated):
|
||||
+ * - SDIO_RESET_L_WL_REG_ON
|
||||
+ * - PDN (power down when low)
|
||||
+ */
|
||||
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ wireless-wlan {
|
||||
+ compatible = "wlan-platdata";
|
||||
+ rockchip,grf = <&grf>;
|
||||
+ sdio_vref = <1800>;
|
||||
+ status = "okay";
|
||||
+ wifi_chip_type = "8723bs";
|
||||
+ WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&io_domains {
|
||||
+ wifi-supply = <&vcc_18>;
|
||||
+};
|
||||
+
|
||||
+&pinctrl {
|
||||
+ sdio-pwrseq {
|
||||
+ wifi_enable_h: wifienable-h {
|
||||
+ rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ chip_enable_h: chip-enable-h {
|
||||
+ rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&sdio0 {
|
||||
+ bus-width = <4>;
|
||||
+ cap-sd-highspeed;
|
||||
+ cap-sdio-irq;
|
||||
+ clock-frequency = <50000000>;
|
||||
+ clock-freq-min-max = <200000 50000000>;
|
||||
+ disable-wp;
|
||||
+ keep-power-in-suspend;
|
||||
+ mmc-pwrseq = <&sdio_pwrseq>;
|
||||
+ non-removable;
|
||||
+ num-slots = <1>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
+ sd-uhs-sdr104;
|
||||
+ status = "okay";
|
||||
+ supports-sdio;
|
||||
};
|
||||
--
|
||||
2.16.4
|
||||
|
||||
@ -1,21 +0,0 @@
|
||||
#!/bin/bash
|
||||
|
||||
echo "Setup the Bluetooth chip"
|
||||
echo 146 > /sys/class/gpio/export
|
||||
echo 149 > /sys/class/gpio/export
|
||||
echo 151 > /sys/class/gpio/export
|
||||
echo high > /sys/class/gpio/gpio146/direction
|
||||
echo high > /sys/class/gpio/gpio149/direction
|
||||
echo high > /sys/class/gpio/gpio151/direction
|
||||
|
||||
|
||||
echo "Resetting the Bluetooth chip"
|
||||
echo 0 > /sys/class/gpio/gpio149/value
|
||||
echo -e "\tBluetooth chip power down..."
|
||||
sleep 1
|
||||
echo 1 > /sys/class/gpio/gpio149/value
|
||||
echo -e "\tBluetooth chip power up..."
|
||||
sleep 1
|
||||
echo -e "\tResetting done"
|
||||
|
||||
/usr/sbin/rtk_hciattach -s 115200 /dev/ttyS0 rtk_h5 115200 flow
|
||||
@ -4,27 +4,19 @@
|
||||
#
|
||||
################################################################################
|
||||
|
||||
BLUETOOTH_RTL8723_VERSION = 1.0.0
|
||||
BLUETOOTH_RTL8723_VERSION = 1.1.0
|
||||
BLUETOOTH_RTL8723_LICENSE = Apache License 2.0
|
||||
BLUETOOTH_RTL8723_LICENSE_FILES = $(BR2_EXTERNAL_HASSOS_PATH)/../LICENSE
|
||||
BLUETOOTH_RTL8723_SITE = $(BR2_EXTERNAL_HASSOS_PATH)/package/bluetooth-rtl8723
|
||||
BLUETOOTH_RTL8723_SITE_METHOD = local
|
||||
|
||||
define BLUETOOTH_RTL8723_BUILD_CMDS
|
||||
curl -L -o $(@D)/rtk_hciattach https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtk_hciattach
|
||||
|
||||
curl -L -o $(@D)/rtl8723b_config https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtl8723b_config.bin
|
||||
curl -L -o $(@D)/rtl8723b_fw https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtl8723b_fw.bin
|
||||
curl -L -o $(@D)/rtl8723bs_config.bin https://raw.githubusercontent.com/home-assistant/hassos-blobs/e0c8b7aebb626694cf5c017a9e03068aee2bc604/rtl_bt/rtl8723b_config.bin
|
||||
endef
|
||||
|
||||
define BLUETOOTH_RTL8723_INSTALL_TARGET_CMDS
|
||||
$(INSTALL) -d $(TARGET_DIR)/etc/systemd/system/hassos-hardware.target.wants
|
||||
$(INSTALL) -m 0755 $(@D)/bluetooth-rtl8723 $(TARGET_DIR)/usr/sbin/
|
||||
$(INSTALL) -m 0644 $(@D)/bluetooth-rtl8723.service $(TARGET_DIR)/usr/lib/systemd/system/
|
||||
|
||||
$(INSTALL) -d $(TARGET_DIR)/lib/firmware/rtlbt
|
||||
$(INSTALL) -m 0644 $(@D)/rtl8723b_* $(TARGET_DIR)/lib/firmware/rtlbt/
|
||||
$(INSTALL) -m 0755 $(@D)/rtk_hciattach $(TARGET_DIR)/usr/sbin/
|
||||
$(INSTALL) -m 0644 $(@D)/rtl8723bs_config.bin $(TARGET_DIR)/lib/firmware/rtl_bt/
|
||||
endef
|
||||
|
||||
$(eval $(generic-package))
|
||||
|
||||
@ -1,11 +0,0 @@
|
||||
[Unit]
|
||||
Description=Bluetooth for RTL8723
|
||||
Before=bluetooth.service
|
||||
After=dev-ttyS0.device
|
||||
|
||||
[Service]
|
||||
Type=forking
|
||||
ExecStart=/usr/sbin/bluetooth-rtl8723
|
||||
|
||||
[Install]
|
||||
WantedBy=hassos-hardware.target
|
||||
Loading…
x
Reference in New Issue
Block a user