mirror of
https://github.com/home-assistant/operating-system.git
synced 2025-07-28 15:36:29 +00:00
Odroidc2: boot arg cleanup
This commit is contained in:
Ryan Bray
parent
11088580c5
commit
d144f72868
129
buildroot-external/board/odroidc2/boot-env.txt
Normal file
129
buildroot-external/board/odroidc2/boot-env.txt
Normal file
@ -0,0 +1,129 @@
|
||||
# Custom modeline!
|
||||
# To use custom modeline you need to disable all the below resolutions
|
||||
# and setup your own!
|
||||
# For more information check our wiki:
|
||||
# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
|
||||
# Example below:
|
||||
#m=custombuilt
|
||||
#modeline=1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1
|
||||
|
||||
# 480 Lines (720x480)
|
||||
#m=480i60hz
|
||||
#m=480i_rpt
|
||||
#m=480p60hz
|
||||
#m=480p_rpt
|
||||
|
||||
# 576 Lines (720x576)
|
||||
#m=576i50hz
|
||||
#m=576i_rpt
|
||||
#m=576p50hz
|
||||
#m=576p_rpt
|
||||
|
||||
# 720 Lines (1280x720)
|
||||
#m=720p50hz
|
||||
#m=720p60hz
|
||||
|
||||
# 1080 Lines (1920x1080)
|
||||
#m=1080i60hz
|
||||
m=1080p60hz
|
||||
#m=1080i50hz
|
||||
#m=1080p50hz
|
||||
#m=1080p24hz
|
||||
|
||||
# 4K (3840x2160)
|
||||
#m=2160p30hz
|
||||
#m=2160p25hz
|
||||
#m=2160p24hz
|
||||
#m=smpte24hz
|
||||
#m=2160p50hz
|
||||
#m=2160p60hz
|
||||
#m=2160p50hz420
|
||||
#m=2160p60hz420
|
||||
|
||||
### VESA modes ###
|
||||
#m=640x480p60hz
|
||||
#m=800x480p60hz
|
||||
#m=480x800p60hz
|
||||
#m=800x600p60hz
|
||||
#m=1024x600p60hz
|
||||
#m=1024x768p60hz
|
||||
#m=1280x800p60hz
|
||||
#m=1280x1024p60hz
|
||||
#m=1360x768p60hz
|
||||
#m=1440x900p60hz
|
||||
#m=1600x900p60hz
|
||||
#m=1680x1050p60hz
|
||||
#m=1600x1200p60hz
|
||||
#m=1920x1200p60hz
|
||||
#m=2560x1080p60hz
|
||||
#m=2560x1440p60hz
|
||||
#m=2560x1600p60hz
|
||||
#m=3440x1440p60hz
|
||||
|
||||
# HDMI BPP Mode
|
||||
m_bpp=32
|
||||
#m_bpp=24
|
||||
#m_bpp=16
|
||||
|
||||
# HDMI DVI/VGA modes
|
||||
# By default its set to HDMI, if needed change below.
|
||||
# Uncomment only a single Line.
|
||||
#vout=dvi
|
||||
#vout=vga
|
||||
|
||||
# HDMI HotPlug Detection control
|
||||
# Allows you to force HDMI thinking that the cable is connected.
|
||||
# true = HDMI will believe that cable is always connected
|
||||
# false = will let board/monitor negotiate the connection status
|
||||
hpd=true
|
||||
#hpd=false
|
||||
|
||||
# Monitor output
|
||||
# Controls if HDMI PHY should output anything to the monitor
|
||||
monitor_onoff=false
|
||||
|
||||
# Server Mode (aka. No Graphics)
|
||||
# Setting nographics to 1 will disable all video subsystem
|
||||
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
|
||||
nographics=0
|
||||
|
||||
# Meson Timer
|
||||
# 1 - Meson Timer
|
||||
# 0 - Arch Timer
|
||||
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
|
||||
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
|
||||
mesontimer=1
|
||||
|
||||
# UHS (Ultra High Speed) MicroSD mode enable/disable
|
||||
disableuhs=false
|
||||
|
||||
# MicroSD Card Detection enable/disable
|
||||
# Force the MMC controlled to believe that a card is connected.
|
||||
mmc_removable=true
|
||||
|
||||
# USB Multi WebCam tweak
|
||||
# Only enable this if you use it.
|
||||
usbmulticam=false
|
||||
|
||||
# CPU Frequency / Cores control
|
||||
###########################################
|
||||
### WARNING!!! WARNING!!! WARNING!!!
|
||||
# Before changing anything here please read the wiki entry:
|
||||
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
|
||||
#
|
||||
# MAX CPU's
|
||||
#maxcpus=1
|
||||
#maxcpus=2
|
||||
#maxcpus=3
|
||||
maxcpus=4
|
||||
|
||||
# MAX Frequency
|
||||
#max_freq=2016
|
||||
#max_freq=1944
|
||||
#max_freq=1944
|
||||
#max_freq=1920
|
||||
#max_freq=1896
|
||||
#max_freq=1752
|
||||
#max_freq=1680
|
||||
#max_freq=1656
|
||||
max_freq=1536
|
||||
@ -16,23 +16,10 @@ rm -rf ${BOOT_DATA}
|
||||
mkdir -p ${BOOT_DATA}
|
||||
|
||||
cp ${BINARIES_DIR}/boot.scr ${BOOT_DATA}/boot.scr
|
||||
cp ${BOARD_DIR}/boot-env.txt ${BOOT_DATA}/uboot-settings.txt
|
||||
cp ${BINARIES_DIR}/meson-gxbb-odroidc2.dtb ${BOOT_DATA}/meson-gxbb-odroidc2.dtb
|
||||
|
||||
# Update Boot options
|
||||
(
|
||||
echo -n -e "\x41\xD9\x12\xFF"
|
||||
echo -n -e "\x00\x00"
|
||||
) > ${BOOT_DATA}/uboot.env
|
||||
|
||||
# Update Boot options
|
||||
(
|
||||
echo "kernel=u-boot.bin"
|
||||
echo "disable_splash=1"
|
||||
echo "dtparam=audio=on"
|
||||
echo "arm_64bit=1"
|
||||
) > ${BOOT_DATA}/config.txt
|
||||
|
||||
echo "console=ttyS0,115200n8 console=tty0" > ${BOOT_DATA}/cmdline.txt
|
||||
echo "console=tty0 console=ttyAML0,115200n8" > ${BOOT_DATA}/cmdline.txt
|
||||
|
||||
function make_bootable() {
|
||||
local BL1="${BINARIES_DIR}/bl1.bin.hardkernel"
|
||||
|
||||
@ -1,160 +1,20 @@
|
||||
###################################################
|
||||
# Changes made to this are overwritten every time there's a new upgrade
|
||||
# To make your changes permanent change it on
|
||||
# boot.ini.default
|
||||
# After changing it on boot.ini.default run the bootini command to
|
||||
# rewrite this file with your personal permanent settings.
|
||||
# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini
|
||||
########################################################################
|
||||
|
||||
# Possible screen resolutions
|
||||
# Uncomment only a single Line! The line with setenv written.
|
||||
# At least one mode must be selected.
|
||||
|
||||
# Custom modeline!
|
||||
# To use custom modeline you need to disable all the below resolutions
|
||||
# and setup your own!
|
||||
# For more information check our wiki:
|
||||
# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
|
||||
# Example below:
|
||||
# setenv m "custombuilt"
|
||||
# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
|
||||
|
||||
# 480 Lines (720x480)
|
||||
# setenv m "480i60hz" # Interlaced 60Hz
|
||||
# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
|
||||
# setenv m "480p60hz" # 480 Progressive 60Hz
|
||||
# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
|
||||
|
||||
# 576 Lines (720x576)
|
||||
# setenv m "576i50hz" # Interlaced 50Hz
|
||||
# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
|
||||
# setenv m "576p50hz" # Progressive 50Hz
|
||||
# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
|
||||
|
||||
# 720 Lines (1280x720)
|
||||
# setenv m "720p50hz" # 50Hz
|
||||
# setenv m "720p60hz" # 60Hz
|
||||
|
||||
# 1080 Lines (1920x1080)
|
||||
# setenv m "1080i60hz" # Interlaced 60Hz
|
||||
setenv m "1080p60hz" # Progressive 60Hz
|
||||
# setenv m "1080i50hz" # Interlaced 50Hz
|
||||
# setenv m "1080p50hz" # Progressive 50Hz
|
||||
# setenv m "1080p24hz" # Progressive 24Hz
|
||||
|
||||
# 4K (3840x2160)
|
||||
# setenv m "2160p30hz" # Progressive 30Hz
|
||||
# setenv m "2160p25hz" # Progressive 25Hz
|
||||
# setenv m "2160p24hz" # Progressive 24Hz
|
||||
# setenv m "smpte24hz" # Progressive 24Hz SMPTE
|
||||
# setenv m "2160p50hz" # Progressive 50Hz
|
||||
# setenv m "2160p60hz" # Progressive 60Hz
|
||||
# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
|
||||
# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
|
||||
|
||||
### VESA modes ###
|
||||
# setenv m "640x480p60hz"
|
||||
# setenv m "800x480p60hz"
|
||||
# setenv m "480x800p60hz"
|
||||
# setenv m "800x600p60hz"
|
||||
# setenv m "1024x600p60hz"
|
||||
# setenv m "1024x768p60hz"
|
||||
# setenv m "1280x800p60hz"
|
||||
# setenv m "1280x1024p60hz"
|
||||
# setenv m "1360x768p60hz"
|
||||
# setenv m "1440x900p60hz"
|
||||
# setenv m "1600x900p60hz"
|
||||
# setenv m "1680x1050p60hz"
|
||||
# setenv m "1600x1200p60hz"
|
||||
# setenv m "1920x1200p60hz"
|
||||
# setenv m "2560x1080p60hz"
|
||||
# setenv m "2560x1440p60hz"
|
||||
# setenv m "2560x1600p60hz"
|
||||
# setenv m "3440x1440p60hz"
|
||||
|
||||
# HDMI BPP Mode
|
||||
setenv m_bpp "32"
|
||||
# setenv m_bpp "24"
|
||||
# setenv m_bpp "16"
|
||||
|
||||
# HDMI DVI/VGA modes
|
||||
# By default its set to HDMI, if needed change below.
|
||||
# Uncomment only a single Line.
|
||||
# setenv vout "dvi"
|
||||
# setenv vout "vga"
|
||||
|
||||
# HDMI HotPlug Detection control
|
||||
# Allows you to force HDMI thinking that the cable is connected.
|
||||
# true = HDMI will believe that cable is always connected
|
||||
# false = will let board/monitor negotiate the connection status
|
||||
setenv hpd "true"
|
||||
# setenv hpd "false"
|
||||
|
||||
# Monitor output
|
||||
# Controls if HDMI PHY should output anything to the monitor
|
||||
#setenv monitor_onoff "false" # true or false
|
||||
|
||||
# Server Mode (aka. No Graphics)
|
||||
# Setting nographics to 1 will disable all video subsystem
|
||||
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
|
||||
setenv nographics "0"
|
||||
|
||||
# Meson Timer
|
||||
# 1 - Meson Timer
|
||||
# 0 - Arch Timer
|
||||
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
|
||||
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
|
||||
#setenv mesontimer "1"
|
||||
|
||||
# UHS (Ultra High Speed) MicroSD mode enable/disable
|
||||
#setenv disableuhs "false"
|
||||
|
||||
# MicroSD Card Detection enable/disable
|
||||
# Force the MMC controlled to believe that a card is connected.
|
||||
#setenv mmc_removable "true"
|
||||
|
||||
# USB Multi WebCam tweak
|
||||
# Only enable this if you use it.
|
||||
#setenv usbmulticam "false"
|
||||
|
||||
# Default Console Device Setting
|
||||
#setenv condev "console=ttyS0,115200n8 console=tty0" # on both
|
||||
|
||||
# CPU Frequency / Cores control
|
||||
###########################################
|
||||
### WARNING!!! WARNING!!! WARNING!!!
|
||||
# Before changing anything here please read the wiki entry:
|
||||
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
|
||||
#
|
||||
# MAX CPU's
|
||||
# setenv maxcpus "1"
|
||||
# setenv maxcpus "2"
|
||||
# setenv maxcpus "3"
|
||||
setenv maxcpus "4"
|
||||
|
||||
# MAX Frequency
|
||||
# setenv max_freq "2016" # 2.016GHz
|
||||
# setenv max_freq "1944" # 1.944GHz
|
||||
# setenv max_freq "1944" # 1.944GHz
|
||||
# setenv max_freq "1920" # 1.920GHz
|
||||
# setenv max_freq "1896" # 1.896GHz
|
||||
# setenv max_freq "1752" # 1.752GHz
|
||||
# setenv max_freq "1680" # 1.680GHz
|
||||
# setenv max_freq "1656" # 1.656GHz
|
||||
setenv max_freq "1536" # 1.536GHz
|
||||
|
||||
|
||||
|
||||
###########################################
|
||||
|
||||
|
||||
test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
|
||||
test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
|
||||
test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
|
||||
|
||||
if load mmc 0:1 ${ramdisk_addr_r} uboot-settings.txt; then
|
||||
env import -t ${ramdisk_addr_r} ${filesize};
|
||||
fi
|
||||
|
||||
# Board bootargs
|
||||
if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
|
||||
setenv bootargs_odroidc2 "${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
|
||||
|
||||
# HassOS bootargs
|
||||
setenv bootargs_hassos "no_console_suspend hdmimode=${m} m_bpp=${m_bpp} net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory"
|
||||
setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory"
|
||||
|
||||
# HassOS system A/B
|
||||
#setenv bootargs_a "root=PARTUUID=0d3e0000-06 rootfstype=squashfs ro"
|
||||
@ -166,15 +26,12 @@ setenv bootargs_hassos "no_console_suspend hdmimode=${m} m_bpp=${m_bpp} net.ifna
|
||||
setenv bootargs_a "root=PARTUUID=0d3e0000-06 rootfstype=squashfs ro rootwait"
|
||||
setenv bootargs_b "root=PARTUUID=0d3e0000-08 rootfstype=squashfs ro rootwait"
|
||||
|
||||
# Preserve origin bootargs
|
||||
setenv bootargs_odroidc2
|
||||
setenv fdt_org "0x1000000"
|
||||
# Load extraargs
|
||||
fileenv mmc 0:1 ${fdt_org} cmdline.txt cmdline
|
||||
fatload mmc 0:1 ${fdt_org} meson-gxbb-odroidc2.dtb
|
||||
fdt addr ${fdt_org}
|
||||
#fdt get value bootargs_odroidc2 /chosen bootargs
|
||||
usb start
|
||||
|
||||
# Load extraargs
|
||||
fileenv mmc 0:1 ${ramdisk_addr_r} cmdline.txt cmdline
|
||||
fatload mmc 0:1 ${fdt_addr_r} meson-gxbb-odroidc2.dtb
|
||||
#fdt addr ${fdt_addr_r}
|
||||
|
||||
# logical volumes get numbered after physical ones.
|
||||
# 1. boot
|
||||
@ -195,14 +52,14 @@ for BOOT_SLOT in "${BOOT_ORDER}"; do
|
||||
setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
|
||||
echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
|
||||
setenv load_kernel "ext4load mmc 0:5 ${kernel_addr_r} Image"
|
||||
setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
|
||||
setenv bootargs "${bootargs_hassos} ${bootargs_odroidc2} ${bootargs_a} rauc.slot=A ${cmdline}"
|
||||
fi
|
||||
elif test "x${BOOT_SLOT}" = "xB"; then
|
||||
if test ${BOOT_B_LEFT} -gt 0; then
|
||||
setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
|
||||
echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
|
||||
setenv load_kernel "ext4load mmc 0:7 ${kernel_addr_r} Image"
|
||||
setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
|
||||
setenv bootargs "${bootargs_hassos} ${bootargs_odroidc2} ${bootargs_b} rauc.slot=B ${cmdline}"
|
||||
fi
|
||||
fi
|
||||
done
|
||||
@ -221,7 +78,9 @@ fi
|
||||
echo "Loading kernel"
|
||||
run load_kernel
|
||||
echo " Starting kernel"
|
||||
booti ${kernel_addr_r} - ${fdt_org}
|
||||
printenv load_kernel
|
||||
printenv bootargs
|
||||
booti ${kernel_addr_r} - ${fdt_addr_r}
|
||||
|
||||
echo "Fails on boot"
|
||||
reset
|
||||
|
||||
@ -15,3 +15,6 @@ CONFIG_DOS_PARTITION=y
|
||||
CONFIG_FS_EXT4=y
|
||||
CONFIG_CONSOLE_SCROLL_LINES=10
|
||||
CONFIG_CMD_SETEXPR=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_CMD_FILEENV=y
|
||||
|
||||
@ -14,11 +14,6 @@ config BR2_PACKAGE_HARDKERNEL_SBL_ODROID_C2
|
||||
help
|
||||
For the Odroid-C2
|
||||
|
||||
config BR2_PACKAGE_HARDKERNEL_SBL_ODROID_XU4
|
||||
bool "Odroid-XU4"
|
||||
help
|
||||
For the Odroid-XU4. NOT YET IMPLEMENTED!!
|
||||
|
||||
endchoice
|
||||
|
||||
endif
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user