mirror of
https://github.com/home-assistant/operating-system.git
synced 2025-07-22 20:46:29 +00:00
Cap eMMC frequency to 24MHz in U-Boot for ODROID-N2(+) (#1068)
* Revert "Fix boot from 128GB Micron eMMC on ODROID-N2(+) (#1064)" This reverts commit b4f2208363a73a4ccfe2006c1ecc4db9b966fc82. * Cap eMMC frequency to 24MHz in U-Boot for ODROID-N2(+) as well
This commit is contained in:
parent
a619faf6c6
commit
e6843b2fce
@ -0,0 +1,29 @@
|
||||
From 88650de0cd71c3d75fda780fad2827432516d780 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <88650de0cd71c3d75fda780fad2827432516d780.1607441248.git.stefan@agner.ch>
|
||||
In-Reply-To: <c12338d22649e46aed12ebe60d897112f045fda9.1607441248.git.stefan@agner.ch>
|
||||
References: <c12338d22649e46aed12ebe60d897112f045fda9.1607441248.git.stefan@agner.ch>
|
||||
From: Neil Armstrong <narmstrong@baylibre.com>
|
||||
Date: Mon, 2 Sep 2019 15:42:04 +0200
|
||||
Subject: [PATCH 4/4] HACK: mmc: meson-gx: limit to 24MHz
|
||||
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
---
|
||||
drivers/mmc/meson_gx_mmc.c | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
|
||||
index b5f5122b1b..00bfa3249e 100644
|
||||
--- a/drivers/mmc/meson_gx_mmc.c
|
||||
+++ b/drivers/mmc/meson_gx_mmc.c
|
||||
@@ -252,7 +252,7 @@ static int meson_mmc_probe(struct udevice *dev)
|
||||
cfg->host_caps = MMC_MODE_8BIT | MMC_MODE_4BIT |
|
||||
MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
||||
cfg->f_min = DIV_ROUND_UP(SD_EMMC_CLKSRC_24M, CLK_MAX_DIV);
|
||||
- cfg->f_max = 100000000; /* 100 MHz */
|
||||
+ cfg->f_max = SD_EMMC_CLKSRC_24M;
|
||||
cfg->b_max = 511; /* max 512 - 1 blocks */
|
||||
cfg->name = dev->name;
|
||||
|
||||
--
|
||||
2.29.2
|
||||
|
@ -1,103 +0,0 @@
|
||||
From 68d89f37f4793b8d59525725cb882130cbd42433 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <68d89f37f4793b8d59525725cb882130cbd42433.1607375763.git.stefan@agner.ch>
|
||||
In-Reply-To: <c12338d22649e46aed12ebe60d897112f045fda9.1607375763.git.stefan@agner.ch>
|
||||
References: <c12338d22649e46aed12ebe60d897112f045fda9.1607375763.git.stefan@agner.ch>
|
||||
From: Neil Armstrong <narmstrong@baylibre.com>
|
||||
Date: Wed, 11 Nov 2020 08:22:10 +0900
|
||||
Subject: [PATCH 4/5] mmc: meson-gx: change clock phase value on SM1 SoCs
|
||||
|
||||
Amlogic SM1 SoCs doesn't work over 50MHz. When phase sets to 270', it's
|
||||
working fine over 50MHz on Amlogic SM1 SoCs.
|
||||
Since Other Amlogic SoCs doens't report an issue, phase value is using
|
||||
to 180' by default.
|
||||
|
||||
To distinguish which value is used adds an u-boot only sm1 compatible.
|
||||
|
||||
In future, it needs to find what value is a proper about each SoCs.
|
||||
|
||||
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
|
||||
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
|
||||
Tested-by: Anand Moon <linux.amoon@gmail.com>
|
||||
---
|
||||
arch/arm/include/asm/arch-meson/sd_emmc.h | 5 +++++
|
||||
drivers/mmc/meson_gx_mmc.c | 27 +++++++++++++++++++----
|
||||
2 files changed, 28 insertions(+), 4 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h
|
||||
index e3a72c8b66..a9dbb0884b 100644
|
||||
--- a/arch/arm/include/asm/arch-meson/sd_emmc.h
|
||||
+++ b/arch/arm/include/asm/arch-meson/sd_emmc.h
|
||||
@@ -8,6 +8,11 @@
|
||||
|
||||
#include <mmc.h>
|
||||
|
||||
+enum meson_gx_mmc_compatible {
|
||||
+ MMC_COMPATIBLE_GX,
|
||||
+ MMC_COMPATIBLE_SM1,
|
||||
+};
|
||||
+
|
||||
#define SDIO_PORT_A 0
|
||||
#define SDIO_PORT_B 1
|
||||
#define SDIO_PORT_C 2
|
||||
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
|
||||
index b5f5122b1b..b5d22dca1e 100644
|
||||
--- a/drivers/mmc/meson_gx_mmc.c
|
||||
+++ b/drivers/mmc/meson_gx_mmc.c
|
||||
@@ -15,6 +15,14 @@
|
||||
#include <asm/arch/sd_emmc.h>
|
||||
#include <linux/log2.h>
|
||||
|
||||
+bool meson_gx_mmc_is_compatible(struct udevice *dev,
|
||||
+ enum meson_gx_mmc_compatible family)
|
||||
+{
|
||||
+ enum meson_gx_mmc_compatible compat = dev_get_driver_data(dev);
|
||||
+
|
||||
+ return compat == family;
|
||||
+}
|
||||
+
|
||||
static inline void *get_regbase(const struct mmc *mmc)
|
||||
{
|
||||
struct meson_mmc_platdata *pdata = mmc->priv;
|
||||
@@ -40,6 +48,8 @@ static void meson_mmc_config_clock(struct mmc *mmc)
|
||||
if (!mmc->clock)
|
||||
return;
|
||||
|
||||
+ /* TOFIX This should use the proper clock taken from DT */
|
||||
+
|
||||
/* 1GHz / CLK_MAX_DIV = 15,9 MHz */
|
||||
if (mmc->clock > 16000000) {
|
||||
clk = SD_EMMC_CLKSRC_DIV2;
|
||||
@@ -50,8 +60,16 @@ static void meson_mmc_config_clock(struct mmc *mmc)
|
||||
}
|
||||
clk_div = DIV_ROUND_UP(clk, mmc->clock);
|
||||
|
||||
- /* 180 phase core clock */
|
||||
- meson_mmc_clk |= CLK_CO_PHASE_180;
|
||||
+ /*
|
||||
+ * SM1 SoCs doesn't work fine over 50MHz with CLK_CO_PHASE_180
|
||||
+ * If CLK_CO_PHASE_270 is used, it's more stable than other.
|
||||
+ * Other SoCs use CLK_CO_PHASE_180 by default.
|
||||
+ * It needs to find what is a proper value about each SoCs.
|
||||
+ */
|
||||
+ if (meson_gx_mmc_is_compatible(mmc->dev, MMC_COMPATIBLE_SM1))
|
||||
+ meson_mmc_clk |= CLK_CO_PHASE_270;
|
||||
+ else
|
||||
+ meson_mmc_clk |= CLK_CO_PHASE_180;
|
||||
|
||||
/* 180 phase tx clock */
|
||||
meson_mmc_clk |= CLK_TX_PHASE_000;
|
||||
@@ -295,8 +313,9 @@ int meson_mmc_bind(struct udevice *dev)
|
||||
}
|
||||
|
||||
static const struct udevice_id meson_mmc_match[] = {
|
||||
- { .compatible = "amlogic,meson-gx-mmc" },
|
||||
- { .compatible = "amlogic,meson-axg-mmc" },
|
||||
+ { .compatible = "amlogic,meson-gx-mmc", .data = MMC_COMPATIBLE_GX },
|
||||
+ { .compatible = "amlogic,meson-axg-mmc", .data = MMC_COMPATIBLE_GX },
|
||||
+ { .compatible = "amlogic,meson-sm1-mmc", .data = MMC_COMPATIBLE_SM1 },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
|
||||
--
|
||||
2.29.2
|
||||
|
@ -1,73 +0,0 @@
|
||||
From c91d9f6f8137d82d5afe02a33954b322e310d902 Mon Sep 17 00:00:00 2001
|
||||
Message-Id: <c91d9f6f8137d82d5afe02a33954b322e310d902.1607375763.git.stefan@agner.ch>
|
||||
In-Reply-To: <c12338d22649e46aed12ebe60d897112f045fda9.1607375763.git.stefan@agner.ch>
|
||||
References: <c12338d22649e46aed12ebe60d897112f045fda9.1607375763.git.stefan@agner.ch>
|
||||
From: Stefan Agner <stefan@agner.ch>
|
||||
Date: Mon, 7 Dec 2020 17:55:28 +0100
|
||||
Subject: [PATCH 5/5] mmc: meson-gx: change clock phase value on AGX SoCs
|
||||
MIME-Version: 1.0
|
||||
Content-Type: text/plain; charset=UTF-8
|
||||
Content-Transfer-Encoding: 8bit
|
||||
|
||||
Amlogic AGX SoCs seem to have issue communicating with some eMMC
|
||||
devices (in particular with a Micron 128GB eMMC 5.1). The device
|
||||
is detected with 1-bit bus width, and at higher temperature loading
|
||||
pretty much anything from the storage fails: (e.g. fs_devread read error
|
||||
- block).
|
||||
|
||||
When phase is set to 270° it is detected with 8-bit bus width and is
|
||||
working fine accross all temperatures.
|
||||
|
||||
Signed-off-by: Stefan Agner <stefan@agner.ch>
|
||||
---
|
||||
arch/arm/include/asm/arch-meson/sd_emmc.h | 1 +
|
||||
drivers/mmc/meson_gx_mmc.c | 9 +++++----
|
||||
2 files changed, 6 insertions(+), 4 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h b/arch/arm/include/asm/arch-meson/sd_emmc.h
|
||||
index a9dbb0884b..f706761b46 100644
|
||||
--- a/arch/arm/include/asm/arch-meson/sd_emmc.h
|
||||
+++ b/arch/arm/include/asm/arch-meson/sd_emmc.h
|
||||
@@ -10,6 +10,7 @@
|
||||
|
||||
enum meson_gx_mmc_compatible {
|
||||
MMC_COMPATIBLE_GX,
|
||||
+ MMC_COMPATIBLE_AGX,
|
||||
MMC_COMPATIBLE_SM1,
|
||||
};
|
||||
|
||||
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
|
||||
index b5d22dca1e..e2f9583014 100644
|
||||
--- a/drivers/mmc/meson_gx_mmc.c
|
||||
+++ b/drivers/mmc/meson_gx_mmc.c
|
||||
@@ -62,14 +62,15 @@ static void meson_mmc_config_clock(struct mmc *mmc)
|
||||
|
||||
/*
|
||||
* SM1 SoCs doesn't work fine over 50MHz with CLK_CO_PHASE_180
|
||||
+ * AGX SoCs don't work reliable with some eMMCs with CLK_CO_PHASE_180
|
||||
* If CLK_CO_PHASE_270 is used, it's more stable than other.
|
||||
* Other SoCs use CLK_CO_PHASE_180 by default.
|
||||
* It needs to find what is a proper value about each SoCs.
|
||||
*/
|
||||
- if (meson_gx_mmc_is_compatible(mmc->dev, MMC_COMPATIBLE_SM1))
|
||||
- meson_mmc_clk |= CLK_CO_PHASE_270;
|
||||
- else
|
||||
+ if (meson_gx_mmc_is_compatible(mmc->dev, MMC_COMPATIBLE_GX))
|
||||
meson_mmc_clk |= CLK_CO_PHASE_180;
|
||||
+ else
|
||||
+ meson_mmc_clk |= CLK_CO_PHASE_270;
|
||||
|
||||
/* 180 phase tx clock */
|
||||
meson_mmc_clk |= CLK_TX_PHASE_000;
|
||||
@@ -314,7 +315,7 @@ int meson_mmc_bind(struct udevice *dev)
|
||||
|
||||
static const struct udevice_id meson_mmc_match[] = {
|
||||
{ .compatible = "amlogic,meson-gx-mmc", .data = MMC_COMPATIBLE_GX },
|
||||
- { .compatible = "amlogic,meson-axg-mmc", .data = MMC_COMPATIBLE_GX },
|
||||
+ { .compatible = "amlogic,meson-axg-mmc", .data = MMC_COMPATIBLE_AGX },
|
||||
{ .compatible = "amlogic,meson-sm1-mmc", .data = MMC_COMPATIBLE_SM1 },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
--
|
||||
2.29.2
|
||||
|
Loading…
x
Reference in New Issue
Block a user