mirror of
https://github.com/home-assistant/operating-system.git
synced 2025-07-24 13:36:31 +00:00
Remove OrangePi
This commit is contained in:
Pascal Vizeli
parent
33c9de7a6e
commit
f5a1d4ba10
@ -1,20 +0,0 @@
|
||||
# Raspberry PI
|
||||
|
||||
Supported Hardware:
|
||||
|
||||
| Device | Board |
|
||||
|--------|-----------|
|
||||
| Orange Pi Prime | opi-prime |
|
||||
|
||||
## Serial console
|
||||
|
||||
The serial port on the Orange Pi Prime is a 3 pin header located between the
|
||||
power and reset buttons. The pins are labelled away from the board edge. Flow
|
||||
control must be disabled in order to send data. The serial specs are 3.3V TTL,
|
||||
115200,8,n,1
|
||||
|
||||
## I2C
|
||||
|
||||
Add `dtparam=i2c0=on` to `cmdline.txt`
|
||||
|
||||
[config]: ../configuration.md#automatic
|
||||
@ -8,5 +8,4 @@
|
||||
| Tinker Board | 4.19.94 |
|
||||
| Odroid-C2 | 4.19.72 |
|
||||
| Odroid-XU4 | 4.19.72 |
|
||||
| Orangepi-Prime | 4.19.88 |
|
||||
| Intel NUC | 4.19.94 |
|
||||
|
||||
@ -48,8 +48,6 @@ jobs:
|
||||
board: 'odroid_c2'
|
||||
OdroidXU4:
|
||||
board: 'odroid_xu4'
|
||||
OrangePiPrime:
|
||||
board: 'opi_prime'
|
||||
RaspberryPi:
|
||||
board: 'rpi'
|
||||
RaspberryPi0-W:
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
#!/bin/bash
|
||||
# shellcheck disable=SC2155
|
||||
|
||||
function hassos_pre_image() {
|
||||
local BOOT_DATA="$(path_boot_dir)"
|
||||
local SPL="${BINARIES_DIR}/sunxi-spl.bin"
|
||||
local UBOOT="${BINARIES_DIR}/u-boot.itb"
|
||||
local spl_img="$(path_spl_img)"
|
||||
|
||||
cp "${BINARIES_DIR}/boot.scr" "${BOOT_DATA}/boot.scr"
|
||||
cp "${BINARIES_DIR}/sun50i-h5-orangepi-prime.dtb" "${BOOT_DATA}/sun50i-h5-orangepi-prime.dtb"
|
||||
cp "${BOARD_DIR}/config.txt" "${BOOT_DATA}/config.txt"
|
||||
touch "${BOOT_DATA}/cmdline.txt"
|
||||
|
||||
# SPL
|
||||
create_spl_image
|
||||
|
||||
dd if="${SPL}" of="${spl_img}" conv=notrunc bs=512 seek=16
|
||||
dd if="${UBOOT}" of="${spl_img}" conv=notrunc bs=512 seek=80
|
||||
}
|
||||
|
||||
|
||||
function hassos_post_image() {
|
||||
convert_disk_image_gz
|
||||
}
|
||||
@ -1,32 +0,0 @@
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_ARCH_ACTIONS is not set
|
||||
# CONFIG_ARCH_ALPINE is not set
|
||||
# CONFIG_ARCH_BCM2835 is not set
|
||||
# CONFIG_ARCH_BCM_IPROC is not set
|
||||
# CONFIG_ARCH_BERLIN is not set
|
||||
# CONFIG_ARCH_BRCMSTB is not set
|
||||
# CONFIG_ARCH_EXYNOS is not set
|
||||
# CONFIG_ARCH_K3 is not set
|
||||
# CONFIG_ARCH_LAYERSCAPE is not set
|
||||
# CONFIG_ARCH_LG1K is not set
|
||||
# CONFIG_ARCH_HISI is not set
|
||||
# CONFIG_ARCH_MEDIATEK is not set
|
||||
# CONFIG_ARCH_MESON is not set
|
||||
# CONFIG_ARCH_MVEBU is not set
|
||||
# CONFIG_ARCH_QCOM is not set
|
||||
# CONFIG_ARCH_REALTEK is not set
|
||||
# CONFIG_ARCH_ROCKCHIP is not set
|
||||
# CONFIG_ARCH_SEATTLE is not set
|
||||
# CONFIG_ARCH_SYNQUACER is not set
|
||||
# CONFIG_ARCH_RENESAS is not set
|
||||
# CONFIG_ARCH_STRATIX10 is not set
|
||||
# CONFIG_ARCH_TEGRA is not set
|
||||
# CONFIG_ARCH_SPRD is not set
|
||||
# CONFIG_ARCH_THUNDER is not set
|
||||
# CONFIG_ARCH_THUNDER2 is not set
|
||||
# CONFIG_ARCH_UNIPHIER is not set
|
||||
# CONFIG_ARCH_VEXPRESS is not set
|
||||
# CONFIG_ARCH_XGENE is not set
|
||||
# CONFIG_ARCH_ZX is not set
|
||||
# CONFIG_ARCH_ZYNQMP is not set
|
||||
@ -1,3 +0,0 @@
|
||||
i2c0_enable=true
|
||||
i2c1_enable=false
|
||||
i2c2_enable=false
|
||||
@ -1,7 +0,0 @@
|
||||
BOARD_ID=opi-prime
|
||||
BOARD_NAME="Orange Pi Prime"
|
||||
CHASSIS=embedded
|
||||
BOOTLOADER=uboot
|
||||
KERNEL_FILE=Image
|
||||
BOOT_SYS=spl
|
||||
BOOT_ENV_SIZE=0x8000
|
||||
@ -1,88 +0,0 @@
|
||||
|
||||
part start mmc ${devnum} 6 mmc_env
|
||||
mmc dev ${devnum}
|
||||
setenv loadbootstate " \
|
||||
echo 'loading env...'; \
|
||||
mmc read ${ramdisk_addr_r} ${mmc_env} 0x40; \
|
||||
env import -c ${ramdisk_addr_r} 0x8000;"
|
||||
|
||||
setenv storebootstate " \
|
||||
echo 'storing env...'; \
|
||||
env export -c -s 0x8000 ${ramdisk_addr_r} BOOT_ORDER BOOT_A_LEFT BOOT_B_LEFT; \
|
||||
mmc write ${ramdisk_addr_r} ${mmc_env} 0x40;"
|
||||
|
||||
run loadbootstate
|
||||
test -n "${BOOT_ORDER}" || setenv BOOT_ORDER "A B"
|
||||
test -n "${BOOT_A_LEFT}" || setenv BOOT_A_LEFT 3
|
||||
test -n "${BOOT_B_LEFT}" || setenv BOOT_B_LEFT 3
|
||||
|
||||
# HassOS bootargs
|
||||
setenv bootargs_hassos "zram.enabled=1 zram.num_devices=3 apparmor=1 security=apparmor cgroup_enable=memory rootwait"
|
||||
|
||||
# HassOS system A/B
|
||||
setenv bootargs_a "root=PARTUUID=8d3d53e3-6d49-4c38-8349-aff6859e82fd rootfstype=squashfs ro"
|
||||
setenv bootargs_b "root=PARTUUID=a3ec664e-32ce-4665-95ea-7ae90ce9aa20 rootfstype=squashfs ro"
|
||||
|
||||
# Load extraargs
|
||||
fileenv mmc ${devnum}:1 ${ramdisk_addr_r} cmdline.txt cmdline
|
||||
|
||||
# Load device tree
|
||||
fatload mmc ${devnum}:1 ${fdt_addr_r} sun50i-h5-orangepi-prime.dtb
|
||||
fdt addr ${fdt_addr_r}
|
||||
|
||||
if load mmc ${devnum}:1 ${ramdisk_addr_r} config.txt; then
|
||||
env import -t ${ramdisk_addr_r} ${filesize};
|
||||
fi
|
||||
|
||||
if test "${i2c0_enable}" != "false"; then
|
||||
fdt set /soc/i2c@1c2ac00 status "okay"
|
||||
fi
|
||||
|
||||
if test "${i2c1_enable}" != "false"; then
|
||||
fdt set /soc/i2c@1c2b000 status "okay"
|
||||
fi
|
||||
|
||||
if test "${i2c2_enable}" != "false"; then
|
||||
fdt set /soc/i2c@1c2b400 status "okay"
|
||||
fi
|
||||
|
||||
setenv bootargs
|
||||
for BOOT_SLOT in "${BOOT_ORDER}"; do
|
||||
if test "x${bootargs}" != "x"; then
|
||||
# skip remaining slots
|
||||
elif test "x${BOOT_SLOT}" = "xA"; then
|
||||
if test ${BOOT_A_LEFT} -gt 0; then
|
||||
setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1
|
||||
echo "Found valid slot A, ${BOOT_A_LEFT} attempts remaining"
|
||||
setenv load_kernel "ext4load mmc ${devnum}:2 ${kernel_addr_r} Image"
|
||||
setenv bootargs "${bootargs_hassos} ${bootargs_a} rauc.slot=A ${cmdline}"
|
||||
fi
|
||||
elif test "x${BOOT_SLOT}" = "xB"; then
|
||||
if test ${BOOT_B_LEFT} -gt 0; then
|
||||
setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1
|
||||
echo "Found valid slot B, ${BOOT_B_LEFT} attempts remaining"
|
||||
setenv load_kernel "ext4load mmc ${devnum}:4 ${kernel_addr_r} Image"
|
||||
setenv bootargs "${bootargs_hassos} ${bootargs_b} rauc.slot=B ${cmdline}"
|
||||
fi
|
||||
fi
|
||||
done
|
||||
|
||||
if test -n "${bootargs}"; then
|
||||
run storebootstate
|
||||
else
|
||||
echo "No valid slot found, resetting tries to 3"
|
||||
setenv BOOT_A_LEFT 3
|
||||
setenv BOOT_B_LEFT 3
|
||||
run storebootstate
|
||||
reset
|
||||
fi
|
||||
|
||||
echo "Loading kernel"
|
||||
run load_kernel
|
||||
echo " Starting kernel"
|
||||
printenv load_kernel
|
||||
printenv bootargs
|
||||
booti ${kernel_addr_r} - ${fdt_addr_r}
|
||||
|
||||
echo "Fails on boot"
|
||||
reset
|
||||
@ -1,8 +0,0 @@
|
||||
# CONFIG_USB_STORAGE is not set
|
||||
# CONFIG_DOS_PARTITIONcs not set
|
||||
CONFIG_EFI_PARTITION is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_CMD_FILEENV=y
|
||||
CONFIG_ENV_IS_NOWHERE=Y
|
||||
@ -1,116 +0,0 @@
|
||||
BR2_aarch64=y
|
||||
BR2_cortex_a53=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
BR2_DL_DIR="/cache/dl"
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="/cache/cc"
|
||||
BR2_GLOBAL_PATCH_DIR="$(BR2_EXTERNAL_HASSOS_PATH)/patches"
|
||||
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
|
||||
BR2_GCC_VERSION_7_X=y
|
||||
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
||||
BR2_BINUTILS_ENABLE_LTO=y
|
||||
BR2_GCC_ENABLE_LTO=y
|
||||
BR2_TARGET_GENERIC_HOSTNAME="hassio"
|
||||
BR2_TARGET_GENERIC_ISSUE="Welcome to HassOS"
|
||||
BR2_INIT_SYSTEMD=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="tty0"
|
||||
# BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW is not set
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
|
||||
BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime"
|
||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
||||
BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
|
||||
BR2_TARGET_UBOOT_SPL=y
|
||||
BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
|
||||
BR2_TARGET_UBOOT_BOOT_SCRIPT=y
|
||||
BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="$(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime/uboot-boot.ush"
|
||||
BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/bootloader/uboot.config $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime/uboot.config"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.88"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
|
||||
BR2_LINUX_KERNEL_LZ4=y
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
|
||||
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
|
||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_HASSOS_PATH)/kernel/hassos.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/docker.config $(BR2_EXTERNAL_HASSOS_PATH)/kernel/device-support.config $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/kernel.config"
|
||||
BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_HASSOS_PATH)/rootfs-overlay"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-build.sh"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="$(BR2_EXTERNAL_HASSOS_PATH)/scripts/post-image.sh"
|
||||
BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/prime $(BR2_EXTERNAL_HASSOS_PATH)/board/orangepi/hassos-hook.sh"
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_HASSOS_PATH)/busybox.config"
|
||||
BR2_PACKAGE_BUSYBOX_INDIVIDUAL_BINARIES=y
|
||||
BR2_PACKAGE_PROCPS_NG=y
|
||||
BR2_PACKAGE_JQ=y
|
||||
BR2_PACKAGE_E2FSPROGS=y
|
||||
BR2_PACKAGE_E2FSPROGS_RESIZE2FS=y
|
||||
BR2_PACKAGE_SQUASHFS=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
|
||||
BR2_PACKAGE_GPTFDISK=y
|
||||
BR2_PACKAGE_GPTFDISK_SGDISK=y
|
||||
BR2_PACKAGE_UBOOT_TOOLS=y
|
||||
BR2_PACKAGE_CA_CERTIFICATES=y
|
||||
BR2_PACKAGE_LIBDNET=y
|
||||
BR2_PACKAGE_LIBCGROUP=y
|
||||
BR2_PACKAGE_LIBCGROUP_TOOLS=y
|
||||
BR2_PACKAGE_AVAHI=y
|
||||
# BR2_PACKAGE_AVAHI_AUTOIPD is not set
|
||||
BR2_PACKAGE_AVAHI_DAEMON=y
|
||||
BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY=y
|
||||
BR2_PACKAGE_BLUEZ5_UTILS=y
|
||||
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
|
||||
BR2_PACKAGE_DHCP=y
|
||||
BR2_PACKAGE_DHCP_CLIENT=y
|
||||
BR2_PACKAGE_WIREGUARD=y
|
||||
BR2_PACKAGE_DROPBEAR=y
|
||||
# BR2_PACKAGE_DROPBEAR_CLIENT is not set
|
||||
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
|
||||
BR2_PACKAGE_NETWORK_MANAGER=y
|
||||
BR2_PACKAGE_TINI=y
|
||||
BR2_PACKAGE_DOCKER_ENGINE=y
|
||||
BR2_PACKAGE_DOCKER_CLI=y
|
||||
BR2_PACKAGE_RAUC=y
|
||||
BR2_PACKAGE_RAUC_NETWORK=y
|
||||
# BR2_PACKAGE_SYSTEMD_HWDB is not set
|
||||
# BR2_PACKAGE_SYSTEMD_NETWORKD is not set
|
||||
BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
|
||||
# BR2_PACKAGE_SYSTEMD_RESOLVED is not set
|
||||
BR2_PACKAGE_SYSTEMD_COREDUMP=y
|
||||
BR2_PACKAGE_UTIL_LINUX_PARTX=y
|
||||
BR2_PACKAGE_UTIL_LINUX_ZRAMCTL=y
|
||||
BR2_PACKAGE_USB_MODESWITCH=y
|
||||
BR2_PACKAGE_USB_MODESWITCH_DATA=y
|
||||
BR2_TARGET_ROOTFS_SQUASHFS=y
|
||||
BR2_TARGET_ROOTFS_SQUASHFS4_LZ4=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_E2FSPROGS=y
|
||||
BR2_PACKAGE_HOST_GPTFDISK=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_PACKAGE_HOST_RAUC=y
|
||||
BR2_PACKAGE_HOST_SWIG=y
|
||||
BR2_PACKAGE_HASSOS=y
|
||||
BR2_PACKAGE_HASSOS_SUPERVISOR="homeassistant/aarch64-hassio-supervisor"
|
||||
BR2_PACKAGE_HASSOS_SUPERVISOR_VERSION="195"
|
||||
BR2_PACKAGE_HASSOS_SUPERVISOR_ARGS="-e HOMEASSISTANT_REPOSITORY=homeassistant/orangepi-prime-homeassistant"
|
||||
BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE="hassio-supervisor"
|
||||
BR2_PACKAGE_HASSOS_SUPERVISOR_PROFILE_URL="http://s3.amazonaws.com/hassio-version/apparmor.txt"
|
||||
BR2_PACKAGE_HASSOS_CLI="homeassistant/aarch64-hassio-cli"
|
||||
BR2_PACKAGE_HASSOS_CLI_VERSION="15"
|
||||
BR2_PACKAGE_HASSOS_CLI_ARGS="--network=hassio --add-host hassio:172.30.32.2"
|
||||
BR2_PACKAGE_HASSOS_CLI_PROFILE="docker-default"
|
||||
BR2_PACKAGE_HASSOS_APPARMOR_DIR="supervisor/apparmor"
|
||||
BR2_PACKAGE_APPARMOR=y
|
||||
Loading…
x
Reference in New Issue
Block a user