Add patches for the hardware random number generator part of the
Rockchip RK3568. This avoids dbus-broker startup failure seen on some
Hardkernel ODROID-M1 devices due to lack of entropy.
On some platforms (it seems to be pronounced on Intel NUC systems)
Bluetooth advertisements suddenly stop after a short while. Currently
there are work arounds in place to restart the HCI controller to keep
receiving the advertisements.
Advertisements have been received fine with Linux 5.15. This change
reverts a commit which has been isolated to be the culprit.
In case a system takes a bit longer to boot (e.g. due to SWAP
initialization on first boot, especially on a system with lots of memory
and not very fast strage, e.g. an ODROID-M1 using an SD card) we might
time-out waiting for time synchronization before the time
synchronization service even got started. By ordering the
systemd-time-wait-sync.service after the network is online, the timeout
of this service should be started much later. With that the
systemd-time-wait-sync.service shouldn't timeout any longer.
To read the current LED configuration correctly /mnt/boot is required.
This change makes sure that the boot partition is mounted when the OS
Agent starts.
Many x86_64 tablets (e.g. Cherry View) use SDIO WiFi modules, this
enables the driver for a common one I've come across in the wild.
This module requires firmware from the following, which are already
enabled for this platform:
- BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX
- BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX_BT
fixes#2422
* Yellow: Always use mini-UART for Bluetooth
Unfortunately, the mini-UART device tree adjusts the alias for serial1,
which we need to make ttyAMA1 the Zigbee UART (UART4).
However, we can no simply adjust that overlay, as the overlays are not
built as part of the Buildroot build. Instead, they are directly copied
from Raspberry Pi's Firmware repostiory.
Instead of using device tree overlays, just apply the changes to our
Yellow specific device tree. To avoid that the device tree gets loaded
anyhow, we could adjust config.txt but that has complications on its
own. Since the overlay might be conflicting with the Yellow device tree
anyways, just remove all of them.
Note: The miniuart-bt.dtbo overlay won't be present, while config.txt
of upgraded instances still reference it. It seems that this doesn't
cause problems at boot time. Leaving the dtoverlay=miniuart-bt present
also allows user to downgrade in case needed.
* Avoid duplicating 98-rpi.conf
* Make it clearer that the image file needs to be renamed
- add information that the update was only successful if version 20230328 is visible.
* Update Documentation/boards/hardkernel/odroid-m1.md
---------
Co-authored-by: Stefan Agner <stefan@agner.ch>
* buildroot 8e1c933e7f...21edbd975f (4):
> package/docker-cli: bump version to v23.0.6
> package/docker-engine: bump version to v23.0.6
> package/containerd: Bump to containerd 1.6.21
> package/runc: bump to version 1.1.7
